Referensi Struct btgatt_client_interface_t
#include <
bt_gatt_client.h
>
Kolom Data |
|
| bt_status_t (* | register_client )( bt_uuid_t *uuid) |
| bt_status_t (* | unregister_client )(int client_if) |
| bt_status_t (* | scan )(bool start) |
| bt_status_t (* | connect )(int client_if, const bt_bdaddr_t *bd_addr, bool is_direct, int transport) |
| bt_status_t (* | disconnect )(int client_if, const bt_bdaddr_t *bd_addr, int conn_id) |
| bt_status_t (* | listen )(int client_if, bool start) |
| bt_status_t (* | refresh )(int client_if, const bt_bdaddr_t *bd_addr) |
| bt_status_t (* | search_service )(int conn_id, bt_uuid_t *filter_uuid) |
| bt_status_t (* | read_characteristic )(int conn_id, uint16_t handle, int auth_req) |
| bt_status_t (* | write_characteristic )(int conn_id, uint16_t handle, int write_type, int auth_req, vector< uint8_t > value) |
| bt_status_t (* | read_descriptor )(int conn_id, uint16_t handle, int auth_req) |
| bt_status_t (* | write_descriptor )(int conn_id, uint16_t handle, int write_type, int auth_req, vector< uint8_t > value) |
| bt_status_t (* | execute_write )(int conn_id, int execute) |
| bt_status_t (* | register_for_notification )(int client_if, const bt_bdaddr_t *bd_addr, uint16_t handle) |
| bt_status_t (* | deregister_for_notification )(int client_if, const bt_bdaddr_t *bd_addr, uint16_t handle) |
| bt_status_t (* | read_remote_rssi )(int client_if, const bt_bdaddr_t *bd_addr) |
| bt_status_t (* | scan_filter_param_setup )( btgatt_filt_param_setup_t filt_param) |
| bt_status_t (* | scan_filter_add_remove )(int client_if, int action, int filt_type, int filt_index, int company_id, int company_id_mask, const bt_uuid_t *p_uuid, const bt_uuid_t *p_uuid_mask, const bt_bdaddr_t *bd_addr, char addr_type, vector< uint8_t > data, vector< uint8_t > p_mask) |
| bt_status_t (* | scan_filter_clear )(int client_if, int filt_index) |
| bt_status_t (* | scan_filter_enable )(int client_if, bool enable) |
| int(* | get_device_type )(const bt_bdaddr_t *bd_addr) |
| bt_status_t (* | set_adv_data )(int client_if, bool set_scan_rsp, bool include_name, bool include_txpower, int min_interval, int max_interval, int appearance, vector< uint8_t > manufacturer_data, vector< uint8_t > service_data, vector< uint8_t > service_uuid) |
| bt_status_t (* | configure_mtu )(int conn_id, int mtu) |
| bt_status_t (* | conn_parameter_update )(const bt_bdaddr_t *bd_addr, int min_interval, int max_interval, int latency, int timeout) |
| bt_status_t (* | set_scan_parameters )(int client_if, int scan_interval, int scan_window) |
| bt_status_t (* | multi_adv_enable )(int client_if, int min_interval, int max_interval, int adv_type, int chnl_map, int tx_power, int timeout_s) |
| bt_status_t (* | multi_adv_update )(int client_if, int min_interval, int max_interval, int adv_type, int chnl_map, int tx_power, int timeout_s) |
| bt_status_t (* | multi_adv_set_inst_data )(int client_if, bool set_scan_rsp, bool include_name, bool incl_txpower, int appearance, vector< uint8_t > manufacturer_data, vector< uint8_t > service_data, vector< uint8_t > service_uuid) |
| bt_status_t (* | multi_adv_disable )(int client_if) |
| bt_status_t (* | batchscan_cfg_storage )(int client_if, int batch_scan_full_max, int batch_scan_trunc_max, int batch_scan_notify_threshold) |
| bt_status_t (* | batchscan_enb_batch_scan )(int client_if, int scan_mode, int scan_interval, int scan_window, int addr_type, int discard_rule) |
| bt_status_t (* | batchscan_dis_batch_scan )(int client_if) |
| bt_status_t (* | batchscan_read_reports )(int client_if, int scan_mode) |
| bt_status_t (* | test_command )(int command, btgatt_test_params_t *params) |
| bt_status_t (* | get_gatt_db )(int conn_id) |
Deskripsi Mendetail
Merepresentasikan antarmuka klien BT-GATT standar.
Definisi di baris 274 file bt_gatt_client.h .
Dokumentasi Bidang
| bt_status_t (* batchscan_cfg_storage)(int client_if, int batch_scan_full_max, int batch_scan_trunc_max, int batch_scan_notify_threshold) |
Definisi di baris 393 dari file bt_gatt_client.h .
| bt_status_t (* batchscan_dis_batch_scan)(int client_if) |
Definisi di baris 401 dari file bt_gatt_client.h .
| bt_status_t (* batchscan_enb_batch_scan)(int client_if, int scan_mode, int scan_interval, int scan_window, int addr_type, int discard_rule) |
Definisi di baris 397 dari file bt_gatt_client.h .
| bt_status_t (* batchscan_read_reports)(int client_if, int scan_mode) |
Definisi di baris 404 dari file bt_gatt_client.h .
| bt_status_t (* configure_mtu)(int conn_id, int mtu) |
Mengonfigurasi MTU untuk koneksi tertentu
Definisi di baris 367 dari file bt_gatt_client.h .
| bt_status_t (* conn_parameter_update)(const bt_bdaddr_t *bd_addr, int min_interval, int max_interval, int latency, int timeout) |
Meminta pembaruan parameter koneksi
Definisi di baris 370 dari file bt_gatt_client.h .
| bt_status_t (* connect)(int client_if, const bt_bdaddr_t *bd_addr, bool is_direct, int transport) |
Membuat koneksi ke perangkat LE jarak jauh atau perangkat mode ganda
Definisi di baris 285 dari file bt_gatt_client.h .
| bt_status_t (* deregister_for_notification)(int client_if, const bt_bdaddr_t *bd_addr, uint16_t handle) |
Membatalkan pendaftaran permintaan sebelumnya untuk notifikasi/indikasi
Definisi di baris 332 dari file bt_gatt_client.h .
| bt_status_t (* disconnect)(int client_if, const bt_bdaddr_t *bd_addr, int conn_id) |
Memutuskan sambungan perangkat jarak jauh atau membatalkan koneksi yang tertunda
Definisi di baris 289 dari file bt_gatt_client.h .
| bt_status_t (* execute_write)(int conn_id, int execute) |
Menjalankan operasi tulis yang telah disiapkan
Definisi di baris 322 dari file bt_gatt_client.h .
| int(* get_device_type)(const bt_bdaddr_t *bd_addr) |
Menentukan jenis perangkat jarak jauh (LE, BR/EDR, Mode ganda)
Definisi di baris 357 dari file bt_gatt_client.h .
| bt_status_t (* get_gatt_db)(int conn_id) |
Mendapatkan konten db gatt
Definisi di baris 410 dari file bt_gatt_client.h .
| bt_status_t (* listen)(int client_if, bool start) |
Memulai atau menghentikan iklan untuk memproses koneksi masuk
Definisi di baris 293 dari file bt_gatt_client.h .
| bt_status_t (* multi_adv_disable)(int client_if) |
Definisi di baris 390 dari file bt_gatt_client.h .
| bt_status_t (* multi_adv_enable)(int client_if, int min_interval, int max_interval, int adv_type, int chnl_map, int tx_power, int timeout_s) |
Definisi di baris 377 dari file bt_gatt_client.h .
| bt_status_t (* multi_adv_set_inst_data)(int client_if, bool set_scan_rsp, bool include_name, bool incl_txpower, int appearance, vector< uint8_t > manufacturer_data, vector< uint8_t > service_data, vector< uint8_t > service_uuid) |
Definisi di baris 385 dari file bt_gatt_client.h .
| bt_status_t (* multi_adv_update)(int client_if, int min_interval, int max_interval, int adv_type, int chnl_map, int tx_power, int timeout_s) |
Definisi di baris 381 dari file bt_gatt_client.h .
| bt_status_t (* read_characteristic)(int conn_id, uint16_t handle, int auth_req) |
Membaca karakteristik di perangkat jarak jauh
Definisi di baris 305 dari file bt_gatt_client.h .
| bt_status_t (* read_descriptor)(int conn_id, uint16_t handle, int auth_req) |
Membaca deskriptor untuk karakteristik tertentu
Definisi di baris 314 dari file bt_gatt_client.h .
| bt_status_t (* read_remote_rssi)(int client_if, const bt_bdaddr_t *bd_addr) |
Meminta RSSI untuk perangkat jarak jauh tertentu
Definisi di baris 336 dari file bt_gatt_client.h .
| bt_status_t (* refresh)(int client_if, const bt_bdaddr_t *bd_addr) |
Menghapus cache atribut untuk perangkat tertentu
Definisi di baris 296 dari file bt_gatt_client.h .
| bt_status_t (* register_client)( bt_uuid_t *uuid) |
Mendaftarkan aplikasi klien GATT dengan stack
Definisi di baris 276 dari file bt_gatt_client.h .
| bt_status_t (* register_for_notification)(int client_if, const bt_bdaddr_t *bd_addr, uint16_t handle) |
Mendaftar untuk menerima notifikasi atau indikasi untuk karakteristik tertentu
Definisi di baris 328 dari file bt_gatt_client.h .
| bt_status_t (* scan)(bool start) |
Memulai atau menghentikan pemindaian perangkat LE
Definisi di baris 282 dari file bt_gatt_client.h .
| bt_status_t (* scan_filter_add_remove)(int client_if, int action, int filt_type, int filt_index, int company_id, int company_id_mask, const bt_uuid_t *p_uuid, const bt_uuid_t *p_uuid_mask, const bt_bdaddr_t *bd_addr, char addr_type, vector< uint8_t > data, vector< uint8_t > p_mask) |
Mengonfigurasi kondisi filter pemindaian
Definisi di baris 343 dari file bt_gatt_client.h .
| bt_status_t (* scan_filter_clear)(int client_if, int filt_index) |
Menghapus semua kondisi filter pemindaian untuk indeks filter tertentu
Definisi di baris 351 dari file bt_gatt_client.h .
| bt_status_t (* scan_filter_enable)(int client_if, bool enable) |
Mengaktifkan / menonaktifkan fitur filter pemindaian
Definisi di baris 354 dari file bt_gatt_client.h .
| bt_status_t (* scan_filter_param_setup)( btgatt_filt_param_setup_t filt_param) |
Menyiapkan parameter filter pemindaian
Definisi di baris 339 dari file bt_gatt_client.h .
| bt_status_t (* search_service)(int conn_id, bt_uuid_t *filter_uuid) |
Mengurutkan semua layanan GATT di perangkat yang terhubung. Secara opsional, hasil dapat difilter untuk UUID tertentu.
Definisi di baris 302 dari file bt_gatt_client.h .
| bt_status_t (* set_adv_data)(int client_if, bool set_scan_rsp, bool include_name, bool include_txpower, int min_interval, int max_interval, int appearance, vector< uint8_t > manufacturer_data, vector< uint8_t > service_data, vector< uint8_t > service_uuid) |
Menetapkan data iklan atau data respons pemindaian
Definisi di baris 360 dari file bt_gatt_client.h .
| bt_status_t (* set_scan_parameters)(int client_if, int scan_interval, int scan_window) |
Menetapkan interval dan periode pemindaian LE dalam satuan N*0,625 md
Definisi di baris 374 dari file bt_gatt_client.h .
| bt_status_t (* test_command)(int command, btgatt_test_params_t *params) |
Antarmuka mode pengujian
Definisi di baris 407 dari file bt_gatt_client.h .
| bt_status_t (* unregister_client)(int client_if) |
Membatalkan pendaftaran aplikasi klien dari stack
Definisi di baris 279 dari file bt_gatt_client.h .
| bt_status_t (* write_characteristic)(int conn_id, uint16_t handle, int write_type, int auth_req, vector< uint8_t > value) |
Menulis karakteristik jarak jauh
Definisi di baris 309 dari file bt_gatt_client.h .
| bt_status_t (* write_descriptor)(int conn_id, uint16_t handle, int write_type, int auth_req, vector< uint8_t > value) |
Menulis deskripsi jarak jauh untuk karakteristik tertentu
Definisi di baris 317 dari file bt_gatt_client.h .
Dokumentasi untuk struct ini dibuat dari file berikut:
- hardware/libhardware/include/hardware/ bt_gatt_client.h