컬렉션을 사용해 정리하기 내 환경설정을 기준으로 콘텐츠를 저장하고 분류하세요.

네이티브 디바이스

public class NativeDevice
extends Object implements IManagedTestDevice , IConfigurationReceiver

java.lang.객체
com.android.tradefed.device.NativeDevice


ITestDevice 전체 스택이 아닌 Android 장치의 기본 구현입니다.

요약

중첩 클래스

class NativeDevice.AdbAction

OS 'adb ....' 명령을 실행하기 위한 DeviceAction .

class NativeDevice.AdbShellAction

class NativeDevice.RebootDeviceAction

장치 재부팅을 위한 DeviceAction .

enum NativeDevice.RebootMode

재부팅 모드입니다.

상수

int INVALID_USER_ID

유효하지 않거나 찾을 수 없는 사용자 ID에 대해 반환된 값: UserHandle이 -10000 값을 정의했습니다.

long MAX_HOST_DEVICE_TIME_OFFSET

int MAX_RETRY_ATTEMPTS

수행하려는 명령 재시도의 기본 횟수

필드

protected static final String SD_CARD

protected static final String STORAGE_EMULATED

protected TestDeviceOptions mOptions

protected final IDeviceStateMonitor mStateMonitor

공개 생성자

NativeDevice (IDevice device, IDeviceStateMonitor stateMonitor, IDeviceMonitor allocationMonitor)

TestDevice 를 만듭니다.

공개 메서드

boolean checkApiLevelAgainstNextRelease (int strictMinLevel)

최소 지원 수준에서 현재 기능이 지원되는지 확인하십시오.

boolean checkConnectivity ()

장치가 네트워크에 연결되어 있는지 확인하십시오.

boolean clearErrorDialogs ()

현재 기기 UI에 표시된 모든 오류 대화 상자를 닫습니다.

void clearLastConnectedWifiNetwork ()

마지막으로 연결된 Wi-Fi 네트워크를 지웁니다.

void clearLogcat ()

누적된 모든 logcat 데이터를 삭제합니다.

boolean connectToWifiNetwork ( wifiSsidToPsk, boolean scanSsid) connectToWifiNetwork ( wifiSsidToPsk, boolean scanSsid)

Wi-Fi 네트워크에 연결합니다.

boolean connectToWifiNetwork (String wifiSsid, String wifiPsk)

Wi-Fi 네트워크에 연결합니다.

boolean connectToWifiNetwork ( wifiSsidToPsk) connectToWifiNetwork ( wifiSsidToPsk)

Wi-Fi 네트워크에 연결합니다.f

boolean connectToWifiNetwork (String wifiSsid, String wifiPsk, boolean scanSsid)

Wi-Fi 네트워크에 연결합니다.

boolean connectToWifiNetworkIfNeeded (String wifiSsid, String wifiPsk, boolean scanSsid)

장치에 현재 네트워크 연결이 없는 경우에만 연결하는 connectToWifiNetwork(String, String) 의 변형입니다.

boolean connectToWifiNetworkIfNeeded (String wifiSsid, String wifiPsk)

장치에 현재 네트워크 연결이 없는 경우에만 연결하는 connectToWifiNetwork(String, String) 의 변형입니다.

int createUser (String name, boolean guest, boolean ephemeral)

주어진 이름과 제공된 플래그로 사용자 생성

int createUser (String name)

지정된 이름과 기본 플래그 0을 사용하여 사용자를 만듭니다.

int createUserNoThrow (String name)

지정된 이름과 기본 플래그 0을 사용하여 사용자를 만듭니다.

void deleteFile (String deviceFilePath)

장치에서 파일 또는 디렉터리를 삭제하는 도우미 메서드입니다.

boolean deviceSoftRestarted ( ProcessInfo prevSystemServerProcess)

현재 system_server 와 이전 system_server ProcessInfo 를 비교하여 장치가 소프트 재시작되었는지 확인하는 도우미 메서드입니다.

boolean deviceSoftRestartedSince (long utcEpochTime, TimeUnit timeUnit)

장치 및 해당 ERROR(/TimeUnit) 의 epoch 이후 UTC 시간 이후 장치가 소프트 다시 시작되었는지 확인하는 도우미 메서드입니다.

boolean disableAdbRoot ()

adb 루트를 끕니다.

void disableKeyguard ()

키가드를 비활성화하려고 시도합니다.

boolean disableNetworkMonitor ()

장치에서 네트워크 모니터링을 비활성화합니다.

boolean disconnectFromWifi ()

Wi-Fi 네트워크에서 연결을 끊습니다.

boolean doesFileExist (String deviceFilePath, int userId)

지정된 사용자에 대해 장치의 파일이 존재하는지 확인하는 도우미 메서드입니다.

boolean doesFileExist (String deviceFilePath)

장치에 파일이 있는지 확인하는 도우미 메서드입니다.

File dumpHeap (String process, String devicePath)

system_server에서 힙을 덤프하려고 시도합니다.

boolean enableAdbRoot ()

adb 루트를 켭니다.

boolean enableNetworkMonitor ()

장치에서 네트워크 모니터링을 활성화합니다.

String executeAdbCommand (long timeout, String... cmdArgs)

지정된 시간 초과가 있는 시스템 명령으로 adb 명령을 실행하는 도우미 메서드입니다.

String executeAdbCommand (String... cmdArgs)

adb 명령을 시스템 명령으로 실행하는 도우미 메서드입니다.

CommandResult executeFastbootCommand (String... cmdArgs)

기본 시간 제한이 2분인 시스템 명령으로 fastboot 명령을 실행하는 도우미 메서드입니다.

CommandResult executeFastbootCommand (long timeout, String... cmdArgs)

fastboot 명령을 시스템 명령으로 실행하는 도우미 메서드입니다.

CommandResult executeLongFastbootCommand ( envVarMap, String... cmdArgs) executeLongFastbootCommand ( envVarMap, String... cmdArgs)

시스템 환경 변수를 사용하여 시스템 명령으로 장기 실행 fastboot 명령을 실행하는 도우미 메서드입니다.

CommandResult executeLongFastbootCommand (String... cmdArgs)

장기 실행 fastboot 명령을 시스템 명령으로 실행하는 도우미 메서드입니다.

String executeShellCommand (String command)

adb 셸 명령을 실행하고 출력을 String 으로 반환하는 도우미 메서드입니다.

void executeShellCommand (String command, IShellOutputReceiver receiver, long maxTimeToOutputShellResponse, TimeUnit timeUnit, int retryAttempts)

명령 동작을 제어하는 ​​더 많은 매개변수와 함께 adb 셸 명령을 실행합니다.

void executeShellCommand (String command, IShellOutputReceiver receiver, long maxTimeoutForCommand, long maxTimeToOutputShellResponse, TimeUnit timeUnit, int retryAttempts)

명령 동작을 제어하는 ​​더 많은 매개변수와 함께 adb 셸 명령을 실행합니다.

void executeShellCommand (String command, IShellOutputReceiver receiver)

주어진 adb 쉘 명령을 실행하고 명령이 실패하면 여러 번 재시도합니다.

CommandResult executeShellV2Command (String cmd)

adb 셸 명령을 실행하고 명령 상태 출력, stdout 및 stderr로 적절히 채워진 CommandResult 로 결과를 반환하는 도우미 메서드입니다.

CommandResult executeShellV2Command (String cmd, OutputStream pipeToOutput)

adb 셸 명령을 실행하고 명령 상태 출력 및 stderr로 적절하게 채워진 CommandResult 로 결과를 반환하는 도우미 메서드입니다.

CommandResult executeShellV2Command (String cmd, File pipeAsInput)

adb 셸 명령을 실행하고 명령 상태 출력, stdout 및 stderr로 적절하게 채워진 CommandResult 로 결과를 반환하는 도우미 메서드입니다.

CommandResult executeShellV2Command (String cmd, long maxTimeoutForCommand, TimeUnit timeUnit, int retryAttempts)

명령 동작을 제어하는 ​​더 많은 매개변수와 함께 adb 셸 명령을 실행합니다.

CommandResult executeShellV2Command (String cmd, long maxTimeoutForCommand, TimeUnit timeUnit)

명령 동작을 제어하는 ​​더 많은 매개변수와 함께 adb 셸 명령을 실행합니다.

CommandResult executeShellV2Command (String cmd, File pipeAsInput, OutputStream pipeToOutput, long maxTimeoutForCommand, TimeUnit timeUnit, int retryAttempts)

명령 동작을 제어하는 ​​더 많은 매개변수와 함께 adb 셸 명령을 실행합니다.

CommandResult executeShellV2Command (String cmd, File pipeAsInput, OutputStream pipeToOutput, OutputStream pipeToError, long maxTimeoutForCommand, TimeUnit timeUnit, int retryAttempts)

명령 동작을 제어하는 ​​더 많은 매개변수와 함께 adb 셸 명령을 실행합니다.

CommandResult fastbootWipePartition (String partition)

장치의 파티션을 지우는 도우미 메서드입니다.

getActiveApexes ()

장치에서 활성화된 APEX에 대한 정보를 가져옵니다.

getAllSettings (String namespace)

요청된 네임스페이스의 키 값 쌍을 반환합니다.

DeviceAllocationState getAllocationState ()

장치의 현재 할당 상태를 반환합니다.

String getAndroidId (int userId)

userId와 관련된 android-id를 찾아서 반환합니다. 찾을 수 없으면 null입니다.

getAndroidIds ()

사용자 ID와 일치하는 Android ID 맵을 만듭니다.

int getApiLevel ()

장치 API 레벨을 가져옵니다.

PackageInfo getAppPackageInfo (String packageName)

장치에 설치된 패키지에 대한 정보를 가져옵니다.

getAppPackageInfos ()

장치에 설치된 패키지 정보를 가져옵니다.

String getBasebandVersion ()

이 장치의 기저대역(무선) 버전을 가져오는 편리한 방법입니다.

Integer getBattery ()

장치의 현재 배터리 수준을 반환하거나 배터리 수준을 사용할 수 없는 경우 Null을 반환합니다.

boolean getBooleanProperty (String name, boolean defaultValue)

주어진 속성의 부울 값을 반환합니다.

getBootHistory ()

도우미 메서드는 부팅 시간 및 부팅 이유가 포함된 부팅 히스토리 맵을 수집합니다.

getBootHistorySince (long utcEpochTime, TimeUnit timeUnit)

Helper 메서드는 장치의 epoch 이후 지정된 시간 이후의 부팅 시간 및 부팅 이유와 지정된 시간 단위가 포함된 부팅 히스토리 맵을 수집합니다.

String getBootloaderVersion ()

이 장치의 부트로더 버전을 가져오는 편리한 방법입니다.

InputStreamSource getBugreport ()

장치에서 버그 보고서를 검색합니다.

InputStreamSource getBugreportz ()

장치에서 bugreportz를 검색합니다.

String getBuildAlias ()

장치가 현재 실행 중인 빌드의 별칭을 검색합니다.

String getBuildFlavor ()

디바이스의 빌드 플레이버를 검색합니다.

String getBuildId ()

장치가 현재 실행 중인 빌드를 검색합니다.

String getBuildSigningKeys ()

장치 이미지에 서명하는 데 사용된 키 유형을 반환합니다.

일반적으로 Android 기기는 테스트 키(AOSP에서와 같이) 또는 릴리스 키(개별 기기 제조업체에서 제어)로 서명될 수 있습니다.

DeviceDescriptor getCachedDeviceDescriptor ()

장치가 할당된 경우 캐시된 DeviceDescriptor 를 반환하고, 그렇지 않으면 현재 DeviceDescriptor 를 반환합니다.

DeviceDescriptor getCachedDeviceDescriptor (boolean shortDescriptor)

장치가 할당된 경우 캐시된 DeviceDescriptor 를 반환하고, 그렇지 않으면 현재 DeviceDescriptor 를 반환합니다.

String[] getChildren (String path)

권한 때문에 때때로 작동하지 않는 IFileEntry 를 사용하는 대신.

DeviceFoldableState getCurrentFoldableState ()

장치의 현재 접을 수 있는 상태를 반환하거나 일부 문제가 발생한 경우 null을 반환합니다.

int getCurrentUser ()

현재 실행 중인 사용자의 ID를 반환합니다.

String getDeviceClass ()

장치 클래스를 가져옵니다.

long getDeviceDate ()

Epoch 이후의 장치 날짜를 밀리초 단위로 반환합니다.

DeviceDescriptor getDeviceDescriptor ()

실제 장치 개체를 전달하지 않고 장치 정보를 얻기 위해 장치 정보에서 DeviceDescriptor 를 반환합니다.

DeviceDescriptor getDeviceDescriptor (boolean shortDescriptor)

실제 장치 개체를 전달하지 않고 장치 정보를 얻기 위해 장치 정보에서 DeviceDescriptor 를 반환합니다.

TestDeviceState getDeviceState ()

장치의 상태를 가져옵니다.

long getDeviceTimeOffset (Date date)

장치와 주어진 ERROR(/Date) 사이의 시간 차이를 가져오는 도우미입니다.

InputStreamSource getEmulatorOutput ()

에뮬레이터 stdout 및 stderr의 스트림 가져오기

Process getEmulatorProcess ()

이 에뮬레이터에 해당하는 Process 를 반환합니다.

final File getExecuteShellCommandLog ()

모든 executeShellCommand(String) 로그가 포함된 로그입니다.

long getExternalStoreFreeSpace ()

장치 외부 저장소의 여유 공간을 확인하는 도우미 메서드입니다.

String getFastbootPath ()

사용 중인 fastboot 바이너리의 경로를 반환합니다.

String getFastbootProductType ()

빠른 부팅 모드에 있을 때 이 장치의 제품 유형을 가져오는 편리한 방법입니다.

String getFastbootProductVariant ()

빠른 부팅 모드에 있을 때 이 장치의 제품 유형을 가져오는 편리한 방법입니다.

String getFastbootSerialNumber ()

빠른 부팅 모드 일련 번호를 반환합니다.

String getFastbootVariable (String variableName)

장치에서 지정된 fastboot 변수 값을 검색합니다.

String getFastbootVersion ()

사용 중인 fastboot 바이너리의 버전 문자열을 반환합니다.

IFileEntry getFileEntry (String path)

장치의 원격 파일에 대한 참조를 검색합니다.

IFileEntry getFileEntry (FileListingService.FileEntry entry)

루트가 아닌 경로에서 FileEntry 를 가져오는 비공식 도우미입니다.

getFoldableStates ()

장치의 접을 수 있는 상태 목록을 반환합니다.

IDevice getIDevice ()

연결된 ddmlib IDevice 에 대한 참조를 반환합니다.

getInstalledPackageNames ()

장치에 있는 애플리케이션 패키지 이름을 가져옵니다.

long getIntProperty (String name, long defaultValue)

장치에서 주어진 속성의 정수 값을 반환합니다.

String getIpAddress ()

장치의 IP 주소를 가져옵니다.

KeyguardControllerState getKeyguardState ()

키가드의 현재 상태를 가져오기 위해 객체를 반환하거나 지원되지 않는 경우 null을 반환합니다.

long getLastExpectedRebootTimeMillis ()

System.currentTimeMillis() 에서 반환된 EPOCH 이후 Tradefed API가 재부팅을 트리거한 마지막 시간을 반환합니다.

int getLaunchApiLevel ()

장치의 첫 번째 실행 API 레벨을 가져옵니다.

InputStreamSource getLogcat ()

logcat 데이터의 스냅샷 스트림을 가져옵니다.

InputStreamSource getLogcat (int maxBytes)

캡처된 logcat 데이터의 마지막 maxBytes 의 스냅샷 스트림을 가져옵니다.

InputStreamSource getLogcatDump ()

장치에 대한 현재 logcat의 덤프를 가져옵니다.

InputStreamSource getLogcatSince (long date)

제공된 날짜부터 캡처된 logcat 데이터의 스냅샷 스트림을 가져옵니다.

String getMacAddress ()

장치의 MAC 주소를 반환하고 장치에서 쿼리에 실패하면 null을 반환합니다.

getMainlineModuleInfo ()

장치에 설치된 메인 라인 모듈에 대한 정보를 가져옵니다.

int getMaxNumberOfRunningUsersSupported ()

지원되는 최대 동시 실행 사용자 수를 가져옵니다.

int getMaxNumberOfUsersSupported ()

지원되는 최대 사용자 수를 가져옵니다.

IDeviceStateMonitor getMonitor ()

장치와 연결된 IDeviceStateMonitor 를 반환합니다.

String getMountPoint (String mountName)

마운트 지점을 반환합니다.

ITestDevice.MountPointInfo getMountPointInfo (String mountpoint)

지정된 마운트 지점 경로에 해당하는 MountPointInfo 를 반환하거나 해당 경로에 마운트된 항목이 없거나 /proc/mounts에 마운트 지점으로 표시되지 않는 경우 null 을 반환합니다.

getMountPointInfo ()

장치의 /proc/mounts에 있는 정보의 구문 분석된 버전을 반환합니다.

TestDeviceOptions getOptions ()

장치에 대한 테스트 옵션을 가져옵니다.

long getPartitionFreeSpace (String partition)

장치 파티션의 여유 공간을 결정하는 도우미 메서드입니다.

Integer getPrimaryUserId ()

기본 사용자 ID를 반환합니다.

ProcessInfo getProcessByName (String processName)

Helper 메서드는 "pidof" 및 "stat" 명령을 실행하고 주어진 프로세스의 PID 및 프로세스 시작 시간과 함께 ProcessInfo 개체를 반환합니다.

String getProcessPid (String process)

서비스의 pid를 반환하거나 문제가 발생한 경우 null을 반환합니다.

String getProductType ()

이 장치의 제품 유형을 가져오는 편리한 방법입니다.

String getProductVariant ()

이 장치의 제품 변형을 가져오는 편리한 방법입니다.

String getProperty (String name)

디바이스에서 주어진 속성 값을 검색합니다.

ITestDevice.RecoveryMode getRecoveryMode ()

장치에 사용된 현재 복구 모드를 가져옵니다.

InputStreamSource getScreenshot (String format)

장치에서 스크린샷을 가져옵니다.

InputStreamSource getScreenshot (long displayId)

디스플레이 ID가 지정된 기기에서 스크린샷을 가져옵니다.

InputStreamSource getScreenshot (String format, boolean rescale)

장치에서 스크린샷을 가져옵니다.

InputStreamSource getScreenshot ()

장치에서 스크린샷을 가져옵니다.

String getSerialNumber ()

이 장치의 일련 번호를 가져오는 편리한 방법입니다.

String getSetting (int userId, String namespace, String key)

요청한 설정 값을 반환합니다.

String getSetting (String namespace, String key)

getSetting(int, String, String) 을 참조하고 시스템 사용자에서 수행됩니다.

String getSimOperator ()

SIM 카드 연산자를 반환하거나 사용할 수 없거나 장치를 사용할 수 없는 경우 null을 반환합니다.

String getSimState ()

SIM 카드 상태를 반환하거나 사용할 수 없거나 장치를 사용할 수 없는 경우 null을 반환합니다.

getTombstones ()

장치에서 삭제 표시 목록을 가져와 반환합니다.

long getTotalMemory ()

총 실제 메모리 크기를 바이트 단위로 반환하거나 내부 오류의 경우 -1을 반환합니다.

getUninstallablePackageNames ()

제거할 수 있는 애플리케이션 패키지 이름을 가져옵니다.

boolean getUseFastbootErase ()

장치의 파티션을 지우기 위해 fastboot 지우기 또는 fastboot 형식을 사용할지 여부를 가져옵니다.

int getUserFlags (int userId)

주어진 사용자의 플래그를 찾아 반환합니다.

getUserInfos ()

장치의 UserInfo 에 대한 useId의 맵을 가져옵니다.

int getUserSerialNumber (int userId)

발견된 경우 userId와 연결된 일련 번호를 반환하고 다른 경우 -10000을 반환합니다.

IManagedTestDevice.DeviceEventResponse handleAllocationEvent (DeviceEvent event)

주어진 DeviceEvent 를 처리합니다.

이 장치를 새 할당 상태로 전환하거나 전환하지 않을 수 있는 DeviceEvent를 처리합니다.

boolean hasFeature (String feature)

기기에서 기능을 사용할 수 있는지 확인하세요.

String installPackage (File packageFile, boolean reinstall, String... extraArgs)

기기에 Android 패키지를 설치합니다.

String installPackage (File packageFile, boolean reinstall, boolean grantPermissions, String... extraArgs)

기기에 Android 패키지를 설치합니다.

String installPackageForUser (File packageFile, boolean reinstall, int userId, String... extraArgs)

지정된 사용자의 기기에 Android 패키지를 설치합니다.

String installPackageForUser (File packageFile, boolean reinstall, boolean grantPermissions, int userId, String... extraArgs)

지정된 사용자의 기기에 Android 패키지를 설치합니다.

boolean isAdbRoot ()

boolean isAdbTcp ()
boolean isAppEnumerationSupported ()

기기의 플랫폼이 앱 열거를 지원하는지 확인

boolean isDeviceEncrypted ()

장치가 암호화되었는지 여부를 반환합니다.

boolean isDirectory (String path)

장치의 경로가 디렉터리이면 True를 반환하고 그렇지 않으면 False를 반환합니다.

boolean isEnableAdbRoot ()
boolean isEncryptionSupported ()

장치에서 암호화가 지원되는지 여부를 반환합니다.

boolean isExecutable (String fullPath)

장치의 파일 경로가 실행 파일이면 True를 반환하고 그렇지 않으면 False를 반환합니다.

boolean isFastbootEnabled ()

장치에 대해 빠른 부팅을 사용할 수 있으면 반환합니다.

boolean isHeadless ()

장치가 헤드리스(화면 없음)이면 true를 반환하고 그렇지 않으면 false를 반환합니다.

boolean isMultiUserSupported ()

다중 사용자가 지원되는지 여부를 결정합니다.

boolean isPackageInstalled (String packageName, String userId)

주어진 패키지 이름과 주어진 사용자 ID에 대해 장치를 쿼리하여 해당 사용자에 대해 현재 설치되어 있는지 여부를 확인합니다.

boolean isPackageInstalled (String packageName)

주어진 패키지 이름에 대해 장치를 쿼리하여 현재 설치되어 있는지 여부를 확인합니다.

boolean isRuntimePermissionSupported ()

기기의 플랫폼이 런타임 권한 부여를 지원하는지 확인

boolean isStateBootloaderOrFastbootd ()

장치가 TestDeviceState#FASTBOOT 또는 TestDeviceState.FASTBOOTD 에 있으면 true를 반환합니다.

boolean isUserRunning (int userId)

주어진 사용자가 실행 중인지 확인하십시오.

boolean isUserSecondary (int userId)

지정된 사용자가 플래그에 따라 보조 사용자인지 여부를 반환합니다.

boolean isWifiEnabled ()

Wi-Fi가 활성화되어 있는지 테스트합니다.

listDisplayIds ()

"dumpsys SurfaceFlinger"에서 보고한 대로 장치에서 사용 가능한 디스플레이 ID 목록을 수집합니다.

listUsers ()

장치의 사용자 목록을 가져옵니다.

boolean logAnrs ( ITestLogger logger)

기기에서 ANR을 수집하고 기록합니다.

boolean logBugreport (String dataName, ITestLogger listener)

버그 보고를 받아 보고자에게 기록하는 도우미 메서드입니다.

void logOnDevice (String tag, Log.LogLevel level, String format, Object... args)

장치의 logcat에 메시지를 기록합니다.

void nonBlockingReboot ()

장치를 재부팅하라는 명령을 실행하고 명령이 완료되고 장치가 adb에 더 이상 표시되지 않을 때 반환됩니다.

void postAdbRootAction ()

기기가 adb 루트 이후 및 기기가 다시 온라인 상태가 되기 전에 특정 작업을 수행해야 하는 경우 재정의합니다.

void postAdbUnrootAction ()

장치가 adb unroot 후 및 장치가 다시 온라인 상태가 되기 전에 수행할 특정 작업이 필요한 경우 재정의합니다.

void postBootSetup ()

부팅할 때마다 테스트하기 위해 장치를 구성하는 지침을 수행합니다.

void postInvocationTearDown (Throwable exception)

호출이 완료된 후 실행될 장치별 필수 정리에 대한 추가 단계입니다.

void preInvocationSetup ( IBuildInfo info, MultiMap <String, String> attributes)

호출 흐름 전에 장치에서 실행될 장치별 필수 설정에 대한 추가 단계입니다.

boolean pullDir (String deviceFilePath, File localDir)

장치에서 디렉터리 내용을 재귀적으로 가져옵니다.

boolean pullFile (String remoteFilePath, File localFile)

장치에서 파일을 검색합니다.

File pullFile (String remoteFilePath, int userId)

장치에서 파일을 검색하고 로컬 임시 ERROR(/File) 에 저장하고 해당 File 을 반환합니다.

File pullFile (String remoteFilePath)

장치에서 파일을 검색하고 로컬 임시 ERROR(/File) 에 저장하고 해당 File 을 반환합니다.

boolean pullFile (String remoteFilePath, File localFile, int userId)

장치에서 파일을 검색합니다.

String pullFileContents (String remoteFilePath)

장치에서 파일을 검색하고 내용을 반환합니다.

File pullFileFromExternal (String remoteFilePath)

장치의 외부 저장소에서 파일을 검색하고 로컬 임시 ERROR(/File) 에 저장하고 해당 File 에 대한 참조를 반환하는 편리한 방법입니다.

boolean pushDir (File localFileDir, String deviceFilePath, excludedDirectories) pushDir (File localFileDir, String deviceFilePath, excludedDirectories)

필터링된 일부 디렉터리를 제외하면서 디렉터리 내용을 장치에 재귀적으로 푸시합니다.

boolean pushDir (File localFileDir, String deviceFilePath)

디렉토리 내용을 장치에 재귀적으로 푸시합니다.

boolean pushFile (File localFile, String remoteFilePath, boolean evaluateContentProviderNeeded)

선택적으로 콘텐츠 제공자의 필요성 평가를 고려할 수 있는 pushFile(File, String) 의 변형입니다.

boolean pushFile (File localFile, String remoteFilePath)

파일을 장치에 푸시합니다.

boolean pushString (String contents, String remoteFilePath)

문자열에서 생성된 파일을 장치로 푸시

void reboot (String reason)

재부팅 후에도 지속되도록 지정된 reason 를 사용하여 장치를 adb 모드로 재부팅합니다.

void reboot ()

장치를 adb 모드로 재부팅합니다.

void rebootIntoBootloader ()

장치를 부트로더 모드로 재부팅합니다.

void rebootIntoFastbootd ()

장치를 fastbootd 모드로 재부팅합니다.

void rebootIntoRecovery ()

장치를 adb 복구 모드로 재부팅합니다.

void rebootIntoSideload ()

기기를 adb 사이드로드 모드로 재부팅합니다(이는 복구 중인 특수 모드입니다).

기기가 사이드로드 모드로 전환될 때까지 차단

void rebootIntoSideload (boolean autoReboot)

기기를 adb 사이드로드 모드로 재부팅합니다(이는 복구 중인 특수 모드입니다).

기기가 사이드로드 모드로 전환될 때까지 차단

void rebootUntilOnline ()

장치가 온라인, 즉 adb에 표시될 때까지만 차단하는 reboot() 의 대안입니다.

void rebootUntilOnline (String reason)

장치가 온라인, 즉 adb에 표시될 때까지만 차단하는 reboot() 의 대안입니다.

void rebootUserspace ()

장치의 사용자 공간 부분만 재부팅합니다.

void rebootUserspaceUntilOnline ()

장치가 온라인, 즉 adb에 표시될 때까지만 차단하는 rebootUserspace() ()}의 대안입니다.

boolean recoverDevice ()

장치 통신 복구를 시도합니다.

void remountSystemWritable ()

장치의 시스템 파티션을 쓰기 가능하게 만드십시오.

void remountVendorWritable ()

장치의 공급업체 파티션을 쓰기 가능하게 만드십시오.

boolean removeAdmin (String componentName, int userId)

주어진 사용자에서 주어진 장치 관리자를 제거하고 성공하면 true 를 반환하고 그렇지 않으면 false 를 반환합니다.

void removeOwners ()

최선을 다해 모든 기존 장치 프로필 소유자를 제거하십시오.

boolean removeUser (int userId)

기기에서 지정된 사용자를 제거합니다.

void resetContentProviderSetup ()

다시 트리거하려면 콘텐츠 제공자 설정 플래그를 재설정하세요.

boolean runInstrumentationTests (IRemoteAndroidTestRunner runner, ITestLifeCycleReceiver... listeners)

매개변수로 전달된 하나 이상의 리스너로 ERROR(/#runInstrumentationTests(com.android.ddmlib.testrunner.IRemoteAndroidTestRunner,Collection)) 를 수행하기 위한 편리한 방법입니다.

boolean runInstrumentationTests (IRemoteAndroidTestRunner runner, listeners) runInstrumentationTests (IRemoteAndroidTestRunner runner, listeners)

계측 테스트를 실행하고 장치 복구를 제공합니다.

boolean runInstrumentationTestsAsUser (IRemoteAndroidTestRunner runner, int userId, ITestLifeCycleReceiver... listeners)

ITestDevice#runInstrumentationTests(IRemoteAndroidTestRunner, ITestLifeCycleReceiver...) 와 동일하지만 주어진 사용자에 대해 테스트를 실행합니다.

boolean runInstrumentationTestsAsUser (IRemoteAndroidTestRunner runner, int userId, listeners) runInstrumentationTestsAsUser (IRemoteAndroidTestRunner runner, int userId, listeners)

ERROR(ITestDevice#runInstrumentationTests(IRemoteAndroidTestRunner, Collection)/com.android.tradefed.device.ITestDevice#runInstrumentationTests(com.android.ddmlib.testrunner.IRemoteAndroidTestRunner,Collection) ITestDevice#runInstrumentationTests(IRemoteAndroidTestRunner, Collection)) 실행)과 동일 주어진 사용자를 위해.

void setConfiguration ( IConfiguration configuration)

사용 중인 IConfiguration 을 주입합니다.

void setDate (Date date)

장치에 날짜를 설정합니다

참고: 장치에서 날짜를 설정하려면 루트가 필요합니다.

boolean setDeviceOwner (String componentName, int userId)

지정된 사용자의 장치 소유자로 장치 관리 구성 요소를 설정합니다.

void setDeviceState ( TestDeviceState deviceState)

기기의 상태를 업데이트합니다.

void setEmulatorOutputStream ( SizeLimitedOutputStream output)

에뮬레이터의 경우 SizeLimitedOutputStream 을 로그 출력으로 설정합니다.

void setEmulatorProcess (Process p)

이 장치가 에뮬레이터인 경우 Process 를 설정합니다.

void setFastbootEnabled (boolean fastbootEnabled)

장치에 대한 빠른 부팅 옵션을 설정합니다.

void setFastbootPath (String fastbootPath)

사용해야 하는 fastboot 바이너리의 경로를 설정합니다.

void setIDevice (IDevice newDevice)

이 ITestDevice와 연결된 IDevice를 업데이트합니다.

void setOptions ( TestDeviceOptions options)

장치에 대한 TestDeviceOptions 설정

boolean setProperty (String propKey, String propValue)

장치에 지정된 속성 값을 설정합니다.

void setRecovery ( IDeviceRecovery recovery)

이 장치에 사용할 IDeviceRecovery 를 설정합니다.

void setRecoveryMode ( ITestDevice.RecoveryMode mode)

장치에 사용할 현재 복구 모드를 설정합니다.

void setSetting (String namespace, String key, String value)

setSetting(int, String, String, String) 을 참조하고 시스템 사용자에 대해 수행합니다.

void setSetting (int userId, String namespace, String key, String value)

지정된 사용자의 네임스페이스에 설정 값을 추가합니다.

void setUseFastbootErase (boolean useFastbootErase)

장치의 파티션을 지우기 위해 fastboot 지우기 또는 fastboot 형식을 사용할지 여부를 설정합니다.

void startLogcat ()

백그라운드에서 장치의 logcat 출력 캡처를 시작합니다.

boolean startUser (int userId)

현재 중지된 경우 지정된 사용자를 백그라운드에서 시작합니다.

boolean startUser (int userId, boolean waitFlag)

현재 중지된 경우 지정된 사용자를 백그라운드에서 시작합니다.

void stopEmulatorOutput ()

에뮬레이터 출력을 닫고 삭제합니다.

void stopLogcat ()

장치에서 logcat 출력 캡처를 중지하고 현재 저장된 logcat 데이터를 버립니다.

boolean stopUser (int userId)

지정된 사용자를 중지합니다.

boolean stopUser (int userId, boolean waitFlag, boolean forceFlag)

지정된 사용자를 중지합니다.

String switchToAdbTcp ()

장치를 adb-over-tcp 모드로 전환합니다.

boolean switchToAdbUsb ()

USB 모드를 통해 장치를 adb로 전환하십시오.

boolean switchUser (int userId)

기본 시간 초과가 있는 다른 사용자 ID로 전환합니다.

boolean switchUser (int userId, long timeout)

제공된 제한 시간을 기한으로 사용하여 다른 userId로 전환하십시오.

boolean syncFiles (File localFileDir, String deviceFilePath)

로컬 파일 디렉토리의 내용을 장치에 증분 동기화합니다.

Bugreport takeBugreport ()

bugreport를 가져 와서 처리하기 위해 Bugreport 개체 내부에 반환합니다.

String uninstallPackage (String packageName)

장치에서 Android 패키지를 제거합니다.

String uninstallPackageForUser (String packageName, int userId)

지정된 사용자의 기기에서 Android 패키지를 제거합니다.

boolean unlockDevice ()

장치가 암호화된 상태인 경우 장치의 잠금을 해제합니다.

boolean waitForBootComplete (long timeOut)

장치의 부팅 완료 플래그가 설정될 때까지 차단됩니다.

boolean waitForDeviceAvailable ()

장치가 응답하고 테스트할 수 있을 때까지 기다립니다.

boolean waitForDeviceAvailable (long waitTime)

장치가 응답하고 테스트할 수 있을 때까지 기다립니다.

void waitForDeviceBootloader ()

장치가 fastboot를 통해 표시될 때까지 차단됩니다.

boolean waitForDeviceInRecovery (long waitTime)

장치가 'adb 복구' 상태에 있도록 차단합니다( IDeviceRecovery 와 구별됨).

boolean waitForDeviceInSideload (long waitTime)

기기가 'adb 사이드로드' 상태에 있도록 차단

boolean waitForDeviceNotAvailable (long waitTime)

장치를 사용할 수 없는 블록(예: adb에서 누락됨)

void waitForDeviceOnline ()

장치가 adb를 통해 표시될 때까지 차단됩니다.

void waitForDeviceOnline (long waitTime)

장치가 adb를 통해 표시될 때까지 차단됩니다.

boolean waitForDeviceShell (long waitTime)

장치가 기본 adb 셸 명령에 응답할 때까지 기다립니다.

보호된 방법

void checkApiLevelAgainst (String feature, int strictMinLevel)
NativeDevice.RebootDeviceAction createRebootDeviceAction ( NativeDevice.RebootMode rebootMode, String reason)

재부팅 작업을 수행할 때 사용할 RebootDeviceAction 을 만듭니다.

void doAdbReboot ( NativeDevice.RebootMode rebootMode, String reason)

adb 재부팅을 수행합니다.

void ensureRuntimePermissionSupported ()

런타임 권한이 지원되지 않는 경우 예외를 throw하는 도우미 메서드

InputStreamSource getBugreportInternal ()
File getBugreportzInternal ()

bugreportz zip 파일을 ERROR(/File) 로 가져오는 내부 도우미 메서드입니다.

IRunUtil getRunUtil ()

사용할 RunUtil 인스턴스를 가져옵니다.

String internalGetProperty (String propName, String fastbootVar, String description)

기본적으로 ddmlib 캐시에서 장치 속성을 가져오고 장치가 Fastboot에 있는지 여부에 따라 `adb shell getprop` 또는 `fastboot getvar`로 폴백합니다.

boolean isNewer (File localFile, IFileEntry entry)

로컬 파일이 원격 파일보다 최신 true 를 반환합니다.

boolean performDeviceAction (String actionDescription, com.android.tradefed.device.NativeDevice.DeviceAction action, int retryAttempts)

이 장치에서 작업을 수행합니다.

void postAdbReboot ()

재부팅 후 수행할 수 있는 가능한 추가 작업입니다.

void prePostBootSetup ()

각 기기 유형(AndroidNativeDevice, TestDevice)이 특정 사후 부팅 설정에 대해 이 메서드를 재정의할 수 있도록 합니다.

boolean pullFileInternal (String remoteFilePath, File localFile)
void setClock (Clock clock)

사용할 Clock 인스턴스를 설정합니다.

void setLogStartDelay (int delay)

온라인 장치에 대한 logcat 캡처를 시작하기 전에 대기할 시간을 ms 단위로 설정합니다.

CommandResult simpleFastbootCommand (long timeout, envVarMap, String[] fullCmd) simpleFastbootCommand (long timeout, envVarMap, String[] fullCmd)

환경 변수를 사용하여 간단한 fastboot 명령을 실행하고 명령 상태를 보고합니다.

CommandResult simpleFastbootCommand (long timeout, String[] fullCmd)

간단한 fastboot 명령을 실행하고 명령의 상태를 보고합니다.

boolean waitForDeviceNotAvailable (String operationDesc, long time)

기기를 사용할 수 없게 될 때까지 기다립니다(adb에 보고 중지).

상수

INVALID_USER_ID

public static final int INVALID_USER_ID

유효하지 않거나 찾을 수 없는 사용자 ID에 대해 반환된 값: UserHandle이 -10000 값을 정의했습니다.

상수 값: -10000(0xffffd8f0)

MAX_HOST_DEVICE_TIME_OFFSET

protected static final long MAX_HOST_DEVICE_TIME_OFFSET

상수 값: 5000(0x0000000000001388)

MAX_RETRY_ATTEMPTS

protected static final int MAX_RETRY_ATTEMPTS

수행하려는 명령 재시도의 기본 횟수

상수 값: 2(0x00000002)

필드

SD_CARD

protected static final String SD_CARD

STORAGE_EMULATED

protected static final String STORAGE_EMULATED

m옵션

protected TestDeviceOptions mOptions

mStateMonitor

protected final IDeviceStateMonitor mStateMonitor

공개 생성자

네이티브 디바이스

public NativeDevice (IDevice device, 
                IDeviceStateMonitor stateMonitor, 
                IDeviceMonitor allocationMonitor)

TestDevice 를 만듭니다.

매개변수
device IDevice : 연결된 IDevice

stateMonitor IDeviceStateMonitor : 사용할 IDeviceStateMonitor 메커니즘

allocationMonitor IDeviceMonitor : 할당 상태 변경을 알리는 IDeviceMonitor . null일 수 있음

공개 메서드

checkApiLevelAgainstNextRelease

public boolean checkApiLevelAgainstNextRelease (int strictMinLevel)

최소 지원 수준에서 현재 기능이 지원되는지 확인하십시오. 이 방법은 API 레벨이 올라가기 전에 아직 출시되지 않은 기능을 고려합니다.

매개변수
strictMinLevel int : 기능을 지원하는 엄격한 최소 가능한 수준입니다.

보고
boolean 지원되는 수준이면 True입니다. 그렇지 않으면 거짓입니다.

던지다
DeviceNotAvailableException

연결성 확인

public boolean checkConnectivity ()

장치가 네트워크에 연결되어 있는지 확인하십시오.

보고
boolean 장치에 작동하는 네트워크 연결이 있으면 true 이고, 그렇지 않으면 false 입니다.

던지다
DeviceNotAvailableException

clearErrorDialogs

public boolean clearErrorDialogs ()

현재 기기 UI에 표시된 모든 오류 대화 상자를 닫습니다.

보고
boolean 대화 상자가 없거나 대화 상자가 성공적으로 지워지면 true 입니다. 그렇지 않으면 false .

던지다
DeviceNotAvailableException

clearLastConnectedWifi네트워크

public void clearLastConnectedWifiNetwork ()

마지막으로 연결된 Wi-Fi 네트워크를 지웁니다. 기기 재부팅 후 이전 테스트에서 사용한 Wi-Fi 네트워크 연결을 피하기 위해 새 호출을 시작할 때 호출해야 합니다.

클리어로그캣

public void clearLogcat ()

누적된 모든 logcat 데이터를 삭제합니다.

이는 ITestDevice#getLogcat() 이 특정 시점 이후에 생성된 로그 데이터만 반환하도록 하려는 경우에 유용합니다(예: 새 장치 빌드를 플래시한 후 등).

ConnectToWifi네트워크

public boolean connectToWifiNetwork ( wifiSsidToPsk, 
                boolean scanSsid)

Wi-Fi 네트워크에 연결합니다.

Wi-Fi를 켜고 wifiSsidToPsk 지도에 제공된 Wi-Fi 네트워크 중 하나와 성공적으로 연결될 때까지 차단합니다. 연결이 설정되면 인스턴스는 ITestDevice#disconnectFromWifi() 또는 ITestDevice#clearLastConnectedWifiNetwork() 가 호출될 때까지 재부팅 후 연결 복원을 시도합니다.

매개변수
wifiSsidToPsk : 비밀번호에 대한 Wi-Fi SSID의 맵.

scanSsid boolean : 이 네트워크의 숨겨진 SSID를 검색할지 여부.

보고
boolean Wi-Fi 네트워크에 성공적으로 연결된 경우 true 입니다. 그렇지 않으면 false

던지다
DeviceNotAvailableException

ConnectToWifi네트워크

public boolean connectToWifiNetwork (String wifiSsid, 
                String wifiPsk)

Wi-Fi 네트워크에 연결합니다.

지정된 Wi-Fi 네트워크에 성공적으로 연결될 때까지 Wi-Fi를 켜고 차단합니다. 연결이 설정되면 인스턴스는 ITestDevice#disconnectFromWifi() 또는 ITestDevice#clearLastConnectedWifiNetwork() 가 호출될 때까지 재부팅 후 연결 복원을 시도합니다.

매개변수
wifiSsid String : 연결할 wifi ssid

wifiPsk String : PSK 암호 또는 암호화되지 않은 경우 null

보고
boolean Wi-Fi 네트워크에 성공적으로 연결된 경우 true 입니다. 그렇지 않으면 false

던지다
DeviceNotAvailableException

ConnectToWifi네트워크

public boolean connectToWifiNetwork ( wifiSsidToPsk)

Wi-Fi 네트워크에 연결합니다.

Wi-Fi를 켜고 wifiSsidToPsk 지도에 제공된 Wi-Fi 네트워크 중 하나와 성공적으로 연결될 때까지 차단합니다. 연결이 설정되면 인스턴스는 ITestDevice#disconnectFromWifi() 또는 ITestDevice#clearLastConnectedWifiNetwork() 가 호출될 때까지 재부팅 후 연결을 복원하려고 시도합니다.f

매개변수
wifiSsidToPsk : 비밀번호에 대한 Wi-Fi SSID의 맵.

보고
boolean Wi-Fi 네트워크에 성공적으로 연결된 경우 true 입니다. 그렇지 않으면 false

던지다
DeviceNotAvailableException

ConnectToWifi네트워크

public boolean connectToWifiNetwork (String wifiSsid, 
                String wifiPsk, 
                boolean scanSsid)

Wi-Fi 네트워크에 연결합니다.

지정된 Wi-Fi 네트워크에 성공적으로 연결될 때까지 Wi-Fi를 켜고 차단합니다. 연결이 설정되면 인스턴스는 ITestDevice#disconnectFromWifi() 또는 ITestDevice#clearLastConnectedWifiNetwork() 가 호출될 때까지 재부팅 후 연결 복원을 시도합니다.

매개변수
wifiSsid String : 연결할 wifi ssid

wifiPsk String : PSK 암호 또는 암호화되지 않은 경우 null

scanSsid boolean : 이 네트워크의 숨겨진 SSID를 검색할지 여부.

보고
boolean Wi-Fi 네트워크에 성공적으로 연결된 경우 true 입니다. 그렇지 않으면 false

던지다
DeviceNotAvailableException

ConnectToWifiNetworkIfNeeded

public boolean connectToWifiNetworkIfNeeded (String wifiSsid, 
                String wifiPsk, 
                boolean scanSsid)

장치에 현재 네트워크 연결이 없는 경우에만 연결하는 connectToWifiNetwork(String, String) 의 변형입니다.

매개변수
scanSsid boolean : 이 네트워크의 숨겨진 SSID를 검색할지 여부

보고
boolean Wi-Fi 네트워크에 성공적으로 연결된 경우 true 입니다. 그렇지 않으면 false

던지다
DeviceNotAvailableException

ConnectToWifiNetworkIfNeeded

public boolean connectToWifiNetworkIfNeeded (String wifiSsid, 
                String wifiPsk)

장치에 현재 네트워크 연결이 없는 경우에만 연결하는 connectToWifiNetwork(String, String) 의 변형입니다.

보고
boolean Wi-Fi 네트워크에 성공적으로 연결된 경우 true 입니다. 그렇지 않으면 false

던지다
DeviceNotAvailableException

사용자 생성

public int createUser (String name, 
                boolean guest, 
                boolean ephemeral)

주어진 이름과 제공된 플래그로 사용자 생성

매개변수
name String : 디바이스에서 생성할 사용자의

guest boolean : 생성하는 동안 사용자 플래그 --guest 활성화

ephemeral boolean : 생성하는 동안 사용자 플래그 --ephemeral 활성화

보고
int 생성된 사용자의 id

던지다
DeviceNotAvailableException

사용자 생성

public int createUser (String name)

지정된 이름과 기본 플래그 0을 사용하여 사용자를 만듭니다.

매개변수
name String : 디바이스에서 생성할 사용자의

보고
int 생성된 사용자 ID의 정수

던지다
DeviceNotAvailableException

createUserNoThrow

public int createUserNoThrow (String name)

지정된 이름과 기본 플래그 0을 사용하여 사용자를 만듭니다.

매개변수
name String : 디바이스에서 생성할 사용자의

보고
int 생성된 사용자 ID의 정수 또는 오류의 경우 -1입니다.

던지다
DeviceNotAvailableException

파일 삭제

public void deleteFile (String deviceFilePath)

장치에서 파일 또는 디렉터리를 삭제하는 도우미 메서드입니다.

매개변수
deviceFilePath String : 장치에 있는 파일의 절대 경로입니다.

던지다
DeviceNotAvailableException

deviceSoftRestarted

public boolean deviceSoftRestarted (ProcessInfo prevSystemServerProcess)

현재 system_server 와 이전 system_server ProcessInfo 를 비교하여 장치가 소프트 재시작되었는지 확인하는 도우미 메서드입니다. getProcessByName(String) 을 사용하여 ProcessInfo 를 가져옵니다.

매개변수
prevSystemServerProcess ProcessInfo : 이전 system_server 프로세스 ProcessInfo 입니다.

보고
boolean 장치가 소프트 재시작되면 true

던지다
DeviceNotAvailableException

deviceSoftRestarted부터

public boolean deviceSoftRestartedSince (long utcEpochTime, 
                TimeUnit timeUnit)

장치 및 해당 ERROR(/TimeUnit) 의 epoch 이후 UTC 시간 이후 장치가 소프트 다시 시작되었는지 확인하는 도우미 메서드입니다. Soft-Restart는 장치 하드 재부팅(예: 재부팅 요청) 외부에서 다시 시작된 system_server를 나타냅니다. 밀리초 단위의 현재 장치 utcEpochTime은 getDeviceDate() 메서드로 얻을 수 있습니다.

매개변수
utcEpochTime long : Epoch 이후의 장치 시간(초)입니다.

timeUnit TimeUnit : 주어진 utcEpochTime에 대한 시간 단위 TimeUnit .

보고
boolean 장치가 소프트 재시작되면 true

던지다
DeviceNotAvailableException

비활성화AdbRoot

public boolean disableAdbRoot ()

adb 루트를 끕니다.

adb 루트를 비활성화하면 장치가 adb에서 연결 해제될 수 있습니다. 이 방법은 장치를 사용할 수 있을 때까지 차단됩니다.

보고
boolean 성공하면 true 입니다.

던지다
DeviceNotAvailableException

비활성화 키가드

public void disableKeyguard ()

키가드를 비활성화하려고 시도합니다.

먼저 입력 디스패치가 준비될 때까지 기다리십시오. 이는 현재 프레임워크 구현에 가끔 경쟁 조건이 있기 때문에 장치가 BOOT_COMPLETE를 보고하는 것과 거의 동시에 비동기적으로 발생합니다. 그런 다음 키가드를 해제하는 명령이 전송됩니다(비보안 항목에서만 작동).

던지다
DeviceNotAvailableException

네트워크 모니터 비활성화

public boolean disableNetworkMonitor ()

장치에서 네트워크 모니터링을 비활성화합니다.

보고
boolean 모니터링이 성공적으로 비활성화되면 true 입니다. 실패하면 false .

던지다
DeviceNotAvailableException

Wi-Fi에서 연결 해제

public boolean disconnectFromWifi ()

Wi-Fi 네트워크에서 연결을 끊습니다.

알려진 네트워크 목록에서 모든 네트워크를 제거하고 Wi-Fi를 비활성화합니다.

보고
boolean Wi-Fi 네트워크에서 성공적으로 연결 해제되면 true 입니다. 연결 해제에 실패하면 false 입니다.

던지다
DeviceNotAvailableException

파일 존재

public boolean doesFileExist (String deviceFilePath, 
                int userId)

지정된 사용자에 대해 장치의 파일이 존재하는지 확인하는 도우미 메서드입니다.

매개변수
deviceFilePath String : 확인할 장치의 파일 절대 경로

userId int : 파일 존재를 확인할 사용자 ID

보고
boolean 파일이 있으면 true , 그렇지 않으면 false 입니다.

던지다
DeviceNotAvailableException

파일 존재

public boolean doesFileExist (String deviceFilePath)

장치에 파일이 있는지 확인하는 도우미 메서드입니다.

매개변수
deviceFilePath String : 확인할 장치의 파일 절대 경로

보고
boolean 파일이 있으면 true , 그렇지 않으면 false 입니다.

던지다
DeviceNotAvailableException

덤프힙

public File dumpHeap (String process, 
                String devicePath)

system_server에서 힙을 덤프하려고 합니다. 덤프된 파일을 정리하는 것은 호출자의 책임입니다.

매개변수
process String : dumpheap에 대한 장치 프로세스의 이름입니다.

devicePath String : 덤프를 넣을 장치의 경로입니다. 권한이 허용하는 위치여야 합니다.

보고
File 보고서를 포함하는 ERROR(/File) . 무언가가 실패하면 Null입니다.

던지다
DeviceNotAvailableException

enableAdbRoot

public boolean enableAdbRoot ()

adb 루트를 켭니다. "루트 활성화" 설정이 "거짓"이면 메시지를 기록하고 루트를 활성화하지 않고 반환합니다.

adb 루트를 활성화하면 장치가 adb에서 연결 해제될 수 있습니다. 이 방법은 장치를 사용할 수 있을 때까지 차단됩니다.

보고
boolean 성공하면 true 입니다.

던지다
DeviceNotAvailableException

네트워크 모니터 활성화

public boolean enableNetworkMonitor ()

장치에서 네트워크 모니터링을 활성화합니다.

보고
boolean 모니터링이 성공적으로 활성화되면 true 입니다. 실패하면 false .

던지다
DeviceNotAvailableException

실행Adb명령

public String executeAdbCommand (long timeout, 
                String... cmdArgs)

지정된 시간 초과가 있는 시스템 명령으로 adb 명령을 실행하는 도우미 메서드입니다.

executeShellCommand(String) 는 더 나은 오류 감지 및 성능을 제공하므로 가능한 한 대신 사용해야 합니다.

매개변수
timeout long : 장치가 응답하지 않는 것으로 간주되기까지의 시간(밀리초), 시간 초과가 없는 경우 0L

cmdArgs String : 실행할 adb 명령 및 인수

보고
String 명령에서 stdout. 명령 실행에 실패한 경우 null 입니다.

던지다
DeviceNotAvailableException

실행Adb명령

public String executeAdbCommand (String... cmdArgs)

adb 명령을 시스템 명령으로 실행하는 도우미 메서드입니다.

executeShellCommand(String) 는 더 나은 오류 감지 및 성능을 제공하므로 가능한 한 대신 사용해야 합니다.

매개변수
cmdArgs String : 실행할 adb 명령 및 인수

보고
String 명령에서 stdout. 명령 실행에 실패한 경우 null 입니다.

던지다
DeviceNotAvailableException

빠른 부팅 명령 실행

public CommandResult executeFastbootCommand (String... cmdArgs)

기본 시간 제한이 2분인 시스템 명령으로 fastboot 명령을 실행하는 도우미 메서드입니다.

장치가 이미 fastboot 모드에 있을 때 사용될 것으로 예상됩니다.

매개변수
cmdArgs String : fastboot 명령 및 실행할 인수

보고
CommandResult 명령의 출력을 포함하는 CommandResult

던지다
DeviceNotAvailableException

빠른 부팅 명령 실행

public CommandResult executeFastbootCommand (long timeout, 
                String... cmdArgs)

fastboot 명령을 시스템 명령으로 실행하는 도우미 메서드입니다.

장치가 이미 fastboot 모드에 있을 때 사용될 것으로 예상됩니다.

매개변수
timeout long : 명령이 만료되기 전의 시간(밀리초)

cmdArgs String : fastboot 명령 및 실행할 인수

보고
CommandResult 명령의 출력을 포함하는 CommandResult

던지다
DeviceNotAvailableException

긴빠른부트명령 실행

public CommandResult executeLongFastbootCommand ( envVarMap, 
                String... cmdArgs)

시스템 환경 변수를 사용하여 시스템 명령으로 장기 실행 fastboot 명령을 실행하는 도우미 메서드입니다.

더 긴 시간 초과를 사용한다는 점을 제외하고 executeFastbootCommand(String) 와 동일합니다.

매개변수
envVarMap : fastboot 명령이 실행되는 시스템 환경 변수

cmdArgs String : fastboot 명령 및 실행할 인수

보고
CommandResult 명령의 출력을 포함하는 CommandResult

던지다
DeviceNotAvailableException

긴빠른부트명령 실행

public CommandResult executeLongFastbootCommand (String... cmdArgs)

장기 실행 fastboot 명령을 시스템 명령으로 실행하는 도우미 메서드입니다.

더 긴 시간 초과를 사용한다는 점을 제외하고 executeFastbootCommand(String) 와 동일합니다.

매개변수
cmdArgs String : fastboot 명령 및 실행할 인수

보고
CommandResult 명령의 출력을 포함하는 CommandResult

던지다
DeviceNotAvailableException

쉘 명령 실행

public String executeShellCommand (String command)

adb 셸 명령을 실행하고 출력을 String 으로 반환하는 도우미 메서드입니다.

매개변수
command String : 실행할 adb 셸 명령

보고
String 쉘 출력

던지다
DeviceNotAvailableException

쉘 명령 실행

public void executeShellCommand (String command, 
                IShellOutputReceiver receiver, 
                long maxTimeToOutputShellResponse, 
                TimeUnit timeUnit, 
                int retryAttempts)

명령 동작을 제어하는 ​​더 많은 매개변수와 함께 adb 셸 명령을 실행합니다.

매개변수
command String : 실행할 adb 셸 명령

receiver IShellOutputReceiver : 쉘 출력을 지시할 IShellOutputReceiver 입니다.

maxTimeToOutputShellResponse long : 명령이 응답을 출력하지 않는 최대 시간입니다. timeUnit 에 지정된 단위

timeUnit TimeUnit : maxTimeToOutputShellResponse 의 단위

retryAttempts int : 예외로 인해 실패한 경우 명령을 재시도하는 최대 횟수입니다. retryAttempts가 성공하지 않고 수행되면 retryAttempts 이 발생합니다.

던지다
DeviceNotAvailableException

쉘 명령 실행

public void executeShellCommand (String command, 
                IShellOutputReceiver receiver, 
                long maxTimeoutForCommand, 
                long maxTimeToOutputShellResponse, 
                TimeUnit timeUnit, 
                int retryAttempts)

명령 동작을 제어하는 ​​더 많은 매개변수와 함께 adb 셸 명령을 실행합니다.

매개변수
command String : 실행할 adb 셸 명령

receiver IShellOutputReceiver : 쉘 출력을 지시할 IShellOutputReceiver 입니다.

maxTimeoutForCommand long : 명령이 완료되는 최대 시간 초과입니다. timeUnit 에 지정된 단위

maxTimeToOutputShellResponse long : 명령이 응답을 출력하지 않는 최대 시간입니다. timeUnit 에 지정된 단위

timeUnit TimeUnit : maxTimeToOutputShellResponse 의 단위

retryAttempts int : 예외로 인해 실패한 경우 명령을 재시도하는 최대 횟수입니다. retryAttempts가 성공하지 않고 수행되면 retryAttempts 이 발생합니다.

던지다
DeviceNotAvailableException

쉘 명령 실행

public void executeShellCommand (String command, 
                IShellOutputReceiver receiver)

주어진 adb 쉘 명령을 실행하고 명령이 실패하면 여러 번 재시도합니다.

기본값을 사용하는 더 단순한 형태의 executeShellCommand(String, com.android.ddmlib.IShellOutputReceiver, long, TimeUnit, int) .

매개변수
command String : 실행할 adb 셸 명령

receiver IShellOutputReceiver : 쉘 출력을 지시할 IShellOutputReceiver 입니다.

던지다
DeviceNotAvailableException

실행ShellV2명령

public CommandResult executeShellV2Command (String cmd)

adb 셸 명령을 실행하고 명령 상태 출력, stdout 및 stderr로 적절히 채워진 CommandResult 로 결과를 반환하는 도우미 메서드입니다.

매개변수
cmd String : 실행해야 하는 명령입니다.

보고
CommandResult CommandResult 의 결과입니다.

던지다
DeviceNotAvailableException

실행ShellV2명령

public CommandResult executeShellV2Command (String cmd, 
                OutputStream pipeToOutput)

adb 셸 명령을 실행하고 명령 상태 출력 및 stderr로 적절하게 채워진 CommandResult 로 결과를 반환하는 도우미 메서드입니다. stdout은 지정된 스트림으로 지정됩니다.

매개변수
cmd String : 실행해야 하는 명령입니다.

pipeToOutput OutputStream : 표준 출력이 리디렉션되는 ERROR(/OutputStream) 또는 null입니다.

보고
CommandResult CommandResult 의 결과입니다.

던지다
DeviceNotAvailableException

실행ShellV2명령

public CommandResult executeShellV2Command (String cmd, 
                File pipeAsInput)

adb 셸 명령을 실행하고 명령 상태 출력, stdout 및 stderr로 적절하게 채워진 CommandResult 로 결과를 반환하는 도우미 메서드입니다.

매개변수
cmd String : 실행해야 하는 명령입니다.

pipeAsInput File : 명령에 대한 입력으로 파이프될 ERROR(/File) 또는 null입니다.

보고
CommandResult CommandResult 의 결과입니다.

던지다
DeviceNotAvailableException

실행ShellV2명령

public CommandResult executeShellV2Command (String cmd, 
                long maxTimeoutForCommand, 
                TimeUnit timeUnit, 
                int retryAttempts)

명령 동작을 제어하는 ​​더 많은 매개변수와 함께 adb 셸 명령을 실행합니다.

매개변수
cmd String : 실행할 adb 셸 명령

maxTimeoutForCommand long : 명령이 완료되는 최대 시간 초과입니다. timeUnit 에 지정된 단위

timeUnit TimeUnit : maxTimeToOutputShellResponse 의 단위

retryAttempts int : 예외로 인해 실패한 경우 명령을 재시도하는 최대 횟수입니다. DeviceNotResponsiveException will be thrown if retryAttempts are performed without success.

보고
CommandResult

던지다
DeviceNotAvailableException

executeShellV2Command

public CommandResult executeShellV2Command (String cmd, 
                long maxTimeoutForCommand, 
                TimeUnit timeUnit)

Executes a adb shell command, with more parameters to control command behavior.

매개변수
cmd String : the adb shell command to run

maxTimeoutForCommand long : the maximum timeout for the command to complete; unit as specified in timeUnit

timeUnit TimeUnit : unit for maxTimeToOutputShellResponse

보고
CommandResult

던지다
DeviceNotAvailableException

executeShellV2Command

public CommandResult executeShellV2Command (String cmd, 
                File pipeAsInput, 
                OutputStream pipeToOutput, 
                long maxTimeoutForCommand, 
                TimeUnit timeUnit, 
                int retryAttempts)

Executes a adb shell command, with more parameters to control command behavior.

매개변수
cmd String : the adb shell command to run

pipeAsInput File : A ERROR(/File) that will be piped as input to the command, or null.

pipeToOutput OutputStream : ERROR(/OutputStream) where the std output will be redirected, or null.

maxTimeoutForCommand long : the maximum timeout for the command to complete; unit as specified in timeUnit

timeUnit TimeUnit : unit for maxTimeToOutputShellResponse

retryAttempts int : the maximum number of times to retry command if it fails due to a exception. DeviceNotResponsiveException will be thrown if retryAttempts are performed without success.

보고
CommandResult

던지다
DeviceNotAvailableException

executeShellV2Command

public CommandResult executeShellV2Command (String cmd, 
                File pipeAsInput, 
                OutputStream pipeToOutput, 
                OutputStream pipeToError, 
                long maxTimeoutForCommand, 
                TimeUnit timeUnit, 
                int retryAttempts)

Executes a adb shell command, with more parameters to control command behavior.

매개변수
cmd String : the adb shell command to run

pipeAsInput File : A ERROR(/File) that will be piped as input to the command, or null.

pipeToOutput OutputStream : ERROR(/OutputStream) where the std output will be redirected, or null.

pipeToError OutputStream : ERROR(/OutputStream) where the std error will be redirected, or null.

maxTimeoutForCommand long : the maximum timeout for the command to complete; unit as specified in timeUnit

timeUnit TimeUnit : unit for maxTimeToOutputShellResponse

retryAttempts int : the maximum number of times to retry command if it fails due to a exception. DeviceNotResponsiveException will be thrown if retryAttempts are performed without success.

보고
CommandResult

던지다
DeviceNotAvailableException

fastbootWipePartition

public CommandResult fastbootWipePartition (String partition)

Helper method which wipes a partition for the device.

If getUseFastbootErase() is true , then fastboot erase will be used to wipe the partition. The device must then create a filesystem the next time the device boots. Otherwise, fastboot format is used which will create a new filesystem on the device.

Expected to be used when device is already in fastboot mode.

매개변수
partition String : the partition to wipe

보고
CommandResult the CommandResult containing output of command

던지다
DeviceNotAvailableException

getActiveApexes

public  getActiveApexes ()

Fetch the information about APEXes activated on the device.

보고
ERROR(/Set) of ApexInfo currently activated on the device

던지다
DeviceNotAvailableException

getAllSettings

public  getAllSettings (String namespace)

Return key value pairs of requested namespace.

매개변수
namespace String : must be one of {"system", "secure", "global"}

보고
the map of key value pairs. Null if namespace is not supported.

던지다
DeviceNotAvailableException

getAllocationState

public DeviceAllocationState getAllocationState ()

Return the current allocation state of device

보고
DeviceAllocationState

getAndroidId

public String getAndroidId (int userId)

Find and return the android-id associated to a userId, null if not found.

매개변수
userId int

보고
String

던지다
DeviceNotAvailableException

getAndroidIds

public  getAndroidIds ()

Create a Map of android ids found matching user ids. There is no insurance that each user id will found an android id associated in this function so some user ids may match null.

보고
Map of android ids found matching user ids.

던지다
DeviceNotAvailableException

getApiLevel

public int getApiLevel ()

Get the device API Level. Defaults to UNKNOWN_API_LEVEL .

보고
int an integer indicating the API Level of device

던지다
DeviceNotAvailableException

getAppPackageInfo

public PackageInfo getAppPackageInfo (String packageName)

Fetch information about a package installed on device.

매개변수
packageName String

보고
PackageInfo the PackageInfo or null if information could not be retrieved

던지다
DeviceNotAvailableException

getAppPackageInfos

public  getAppPackageInfos ()

Fetch information of packages installed on the device.

보고
ERROR(/List) of PackageInfo s installed on the device.

던지다
DeviceNotAvailableException

getBasebandVersion

public String getBasebandVersion ()

Convenience method to get baseband (radio) version of this device. Getting the radio version is device specific, so it might not return the correct information for all devices. This method relies on the gsm.version.baseband propery to return the correct version information. This is not accurate for some CDMA devices and the version returned here might not match the version reported from fastboot and might not return the version for the CDMA radio. TL;DR this method only reports accurate version if the gsm.version.baseband property is the same as the version returned by fastboot getvar version-baseband .

보고
String the String baseband version or null if it cannot be determined (device has no radio or version string cannot be read)

던지다
DeviceNotAvailableException

getBattery

public Integer getBattery ()

Returns the current battery level of a device or Null if battery level unavailable.

보고
Integer

getBooleanProperty

public boolean getBooleanProperty (String name, 
                boolean defaultValue)

Returns boolean value of the given property.

매개변수
name String : the property name

defaultValue boolean : default value to return if property is empty or doesn't exist.

보고
boolean true if the property has value "1" , "y" , "yes" , "on" , or "true" , false if the property has value of "0" , "n" , "no" , "off" , "false" , or defaultValue otherwise.

던지다
DeviceNotAvailableException

getBootHistory

public  getBootHistory ()

Helper method collects the boot history map with boot time and boot reason.

보고
Map of boot time (UTC time in second since Epoch) and boot reason

던지다
DeviceNotAvailableException

getBootHistorySince

public  getBootHistorySince (long utcEpochTime, 
                TimeUnit timeUnit)

Helper method collects the boot history map with boot time and boot reason since the given time since epoch from device and the time unit specified. The current device utcEpochTime in Millisecond can be obtained by method getDeviceDate() .

매개변수
utcEpochTime long : the device time since Epoch.

timeUnit TimeUnit : the time unit TimeUnit .

보고
Map of boot time (UTC time in second since Epoch) and boot reason

던지다
DeviceNotAvailableException

getBootloaderVersion

public String getBootloaderVersion ()

Convenience method to get the bootloader version of this device.

Will attempt to retrieve bootloader version from the device's current state. (ie if device is in fastboot mode, it will attempt to retrieve version from fastboot)

보고
String the String bootloader version or null if it cannot be found

던지다
DeviceNotAvailableException

getBugreport

public InputStreamSource getBugreport ()

Retrieves a bugreport from the device.

The implementation of this is guaranteed to continue to work on a device without an sdcard (or where the sdcard is not yet mounted).

보고
InputStreamSource An InputStreamSource which will produce the bugreport contents on demand. In case of failure, the InputStreamSource will produce an empty ERROR(/InputStream) .

getBugreportz

public InputStreamSource getBugreportz ()

Retrieves a bugreportz from the device. Zip format bugreport contains the main bugreport and other log files that are useful for debugging.

Only supported for 'adb version' > 1.0.36

보고
InputStreamSource a InputStreamSource of the zip file containing the bugreportz, return null in case of failure.

getBuildAlias

public String getBuildAlias ()

Retrieve the alias of the build that the device is currently running.

Build alias is usually a more readable string than build id (typically a number for Nexus builds). For example, final Android 4.2 release has build alias JDQ39, and build id 573038

보고
String the build alias or fall back to build id if it could not be retrieved

던지다
DeviceNotAvailableException

getBuildFlavor

public String getBuildFlavor ()

Retrieve the build flavor for the device.

보고
String the build flavor or null if it could not be retrieved

던지다
DeviceNotAvailableException

getBuildId

public String getBuildId ()

Retrieve the build the device is currently running.

보고
String the build id or IBuildInfo#UNKNOWN_BUILD_ID if it could not be retrieved

던지다
DeviceNotAvailableException

getBuildSigningKeys

public String getBuildSigningKeys ()

Returns the key type used to sign the device image

Typically Android devices may be signed with test-keys (like in AOSP) or release-keys (controlled by individual device manufacturers)

보고
String The signing key if found, null otherwise.

던지다
DeviceNotAvailableException

getCachedDeviceDescriptor

public DeviceDescriptor getCachedDeviceDescriptor ()

Returns a cached DeviceDescriptor if the device is allocated, otherwise returns the current DeviceDescriptor .

보고
DeviceDescriptor

getCachedDeviceDescriptor

public DeviceDescriptor getCachedDeviceDescriptor (boolean shortDescriptor)

Returns a cached DeviceDescriptor if the device is allocated, otherwise returns the current DeviceDescriptor .

매개변수
shortDescriptor boolean : Whether or not to limit descriptor to bare minimum info

보고
DeviceDescriptor

getChildren

public String[] getChildren (String path)

Alternative to using IFileEntry that sometimes won't work because of permissions.

매개변수
path String : is the path on the device where to do the search

보고
String[] Array of string containing all the file in a path on the device.

던지다
DeviceNotAvailableException

getCurrentFoldableState

public DeviceFoldableState getCurrentFoldableState ()

Returns the current foldable state of the device or null if some issues occurred.

보고
DeviceFoldableState

던지다
DeviceNotAvailableException

getCurrentUser

public int getCurrentUser ()

Return the id of the current running user. In case of error, return -10000.

보고
int

던지다
DeviceNotAvailableException

getDeviceClass

public String getDeviceClass ()

Get the device class.

보고
String the String device class.

getDeviceDate

public long getDeviceDate ()

Return the date of the device in millisecond since epoch.

보고
long the date of the device in epoch format.

던지다
DeviceNotAvailableException

getDeviceDescriptor

public DeviceDescriptor getDeviceDescriptor ()

Return a DeviceDescriptor from the device information to get info on it without passing the actual device object.

보고
DeviceDescriptor

getDeviceDescriptor

public DeviceDescriptor getDeviceDescriptor (boolean shortDescriptor)

Return a DeviceDescriptor from the device information to get info on it without passing the actual device object.

매개변수
shortDescriptor boolean : Whether or not to limit descriptor to bare minimum info

보고
DeviceDescriptor

getDeviceState

public TestDeviceState getDeviceState ()

Get the device's state.

보고
TestDeviceState

getDeviceTimeOffset

public long getDeviceTimeOffset (Date date)

Helper to get the time difference between the device and a given ERROR(/Date) . Use Epoch time internally.

매개변수
date Date

보고
long the difference in milliseconds

던지다
DeviceNotAvailableException

getEmulatorOutput

public InputStreamSource getEmulatorOutput ()

Get the stream of emulator stdout and stderr

보고
InputStreamSource emulator output

getEmulatorProcess

public Process getEmulatorProcess ()

Return the Process corresponding to this emulator.

보고
Process the Process or null

getExecuteShellCommandLog

public final File getExecuteShellCommandLog ()

The log that contains all the executeShellCommand(String) logs.

보고
File

getExternalStoreFreeSpace

public long getExternalStoreFreeSpace ()

Helper method to determine amount of free space on device external storage.

보고
long the amount of free space in KB

던지다
DeviceNotAvailableException

getFastbootPath

public String getFastbootPath ()

Returns the path of the fastboot binary being used. Still requires isFastbootEnabled() to be true, to have fastboot functions enabled.

보고
String

getFastbootProductType

public String getFastbootProductType ()

Convenience method to get the product type of this device when its in fastboot mode.

This method should only be used if device should be in fastboot. Its a bit safer variant than the generic getProductType() method in this case, because ITestDevice will know to recover device into fastboot if device is in incorrect state or is unresponsive.

보고
String the String product type name or null if it cannot be determined

던지다
DeviceNotAvailableException

getFastbootProductVariant

public String getFastbootProductVariant ()

Convenience method to get the product type of this device when its in fastboot mode.

This method should only be used if device should be in fastboot. Its a bit safer variant than the generic getProductType() method in this case, because ITestDevice will know to recover device into fastboot if device is in incorrect state or is unresponsive.

보고
String the String product type name or null if it cannot be determined

던지다
DeviceNotAvailableException

getFastbootSerialNumber

public String getFastbootSerialNumber ()

Returns the fastboot mode serial number.

보고
String

getFastbootVariable

public String getFastbootVariable (String variableName)

Retrieve the given fastboot variable value from the device.

매개변수
variableName String : the variable name

보고
String the property value or null if it does not exist

던지다
DeviceNotAvailableException

getFastbootVersion

public String getFastbootVersion ()

Returns the version string of the fastboot binary being used. Or null if something goes wrong.

보고
String

getFileEntry

public IFileEntry getFileEntry (String path)

Retrieve a reference to a remote file on device.

매개변수
path String : the file path to retrieve. Can be an absolute path or path relative to '/'. (ie both "/system" and "system" syntax is supported)

보고
IFileEntry the IFileEntry or null if file at given path cannot be found

던지다
DeviceNotAvailableException

getFileEntry

public IFileEntry getFileEntry (FileListingService.FileEntry entry)

Unofficial helper to get a FileEntry from a non-root path. FIXME: Refactor the FileEntry system to have it available from any path. (even non root).

매개변수
entry FileListingService.FileEntry : a FileEntry not necessarily root as Ddmlib requires.

보고
IFileEntry a FileEntryWrapper representing the FileEntry.

던지다
DeviceNotAvailableException

getFoldableStates

public  getFoldableStates ()

Returns the list of foldable states on the device. Can be obtained with "cmd device_state print-states".

보고

던지다
DeviceNotAvailableException

getIDevice

public IDevice getIDevice ()

Returns a reference to the associated ddmlib IDevice .

A new IDevice may be allocated by DDMS each time the device disconnects and reconnects from adb. Thus callers should not keep a reference to the IDevice , because that reference may become stale.

보고
IDevice the IDevice

getInstalledPackageNames

public  getInstalledPackageNames ()

Fetch the application package names present on the device.

보고
ERROR(/Set) of String package names currently installed on the device.

던지다
DeviceNotAvailableException

getIntProperty

public long getIntProperty (String name, 
                long defaultValue)

Returns integer value of the given property from the device.

매개변수
name String : the property name

defaultValue long : default value to return if property is empty or doesn't exist.

보고
long the property value or defaultValue if the property is empty, doesn't exist, or doesn't have an integer value.

던지다
DeviceNotAvailableException

getIpAddress

public String getIpAddress ()

Gets the device's IP address.

보고
String the device's IP address, or null if device has no IP address

던지다
DeviceNotAvailableException

getKeyguardState

public KeyguardControllerState getKeyguardState ()

Return an object to get the current state of the keyguard or null if not supported.

보고
KeyguardControllerState a KeyguardControllerState containing a snapshot of the state of the keyguard and returns Null if the Keyguard query is not supported.

던지다
DeviceNotAvailableException

getLastExpectedRebootTimeMillis

public long getLastExpectedRebootTimeMillis ()

Returns the last time Tradefed APIs triggered a reboot in milliseconds since EPOCH as returned by System.currentTimeMillis() .

보고
long

getLaunchApiLevel

public int getLaunchApiLevel ()

Get the device's first launched API Level. Defaults to UNKNOWN_API_LEVEL .

보고
int an integer indicating the first launched API Level of device

던지다
DeviceNotAvailableException

getLogcat

public InputStreamSource getLogcat ()

Grabs a snapshot stream of the logcat data.

Works in two modes:

  • If the logcat is currently being captured in the background, will return up to TestDeviceOptions.getMaxLogcatDataSize() bytes of the current contents of the background logcat capture
  • Otherwise, will return a static dump of the logcat data if device is currently responding

    보고
    InputStreamSource

  • getLogcat

    public InputStreamSource getLogcat (int maxBytes)

    Grabs a snapshot stream of the last maxBytes of captured logcat data.

    Useful for cases when you want to capture frequent snapshots of the captured logcat data without incurring the potentially big disk space penalty of getting the entire getLogcat() snapshot.

    매개변수
    maxBytes int : the maximum amount of data to return. Should be an amount that can comfortably fit in memory

    보고
    InputStreamSource

    getLogcatDump

    public InputStreamSource getLogcatDump ()

    Get a dump of the current logcat for device. Unlike getLogcat() , this method will always return a static dump of the logcat.

    Has the disadvantage that nothing will be returned if device is not reachable.

    보고
    InputStreamSource a InputStreamSource of the logcat data. An empty stream is returned if fail to capture logcat data.

    getLogcatSince

    public InputStreamSource getLogcatSince (long date)

    Grabs a snapshot stream of captured logcat data starting the date provided. The time on the device should be used getDeviceDate() .

    매개변수
    date long : in millisecond since epoch format of when to start the snapshot until present. (can be be obtained using 'date +%s')

    보고
    InputStreamSource

    getMacAddress

    public String getMacAddress ()

    Returns the MAC address of the device, null if it fails to query from the device.

    보고
    String

    getMainlineModuleInfo

    public  getMainlineModuleInfo ()

    Get the information about the mainline modules installed on the device.

    보고
    ERROR(/Set) of String mainline modules currently installed on the device.

    던지다
    DeviceNotAvailableException

    getMaxNumberOfRunningUsersSupported

    public int getMaxNumberOfRunningUsersSupported ()

    Get the maximum number of supported simultaneously running users. Defaults to 0.

    보고
    int an integer indicating the number of simultaneously running users

    던지다
    DeviceNotAvailableException

    getMaxNumberOfUsersSupported

    public int getMaxNumberOfUsersSupported ()

    Get the maximum number of supported users. Defaults to 0.

    보고
    int an integer indicating the number of supported users

    던지다
    DeviceNotAvailableException

    getMonitor

    public IDeviceStateMonitor getMonitor ()

    Return the IDeviceStateMonitor associated with device.

    보고
    IDeviceStateMonitor

    getMountPoint

    public String getMountPoint (String mountName)

    Returns a mount point.

    Queries the device directly if the cached info in IDevice is not available.

    TODO: move this behavior to IDevice#getMountPoint(String)

    매개변수
    mountName String : the name of the mount point

    보고
    String the mount point or null

    getMountPointInfo

    public ITestDevice.MountPointInfo getMountPointInfo (String mountpoint)

    Returns a MountPointInfo corresponding to the specified mountpoint path, or null if that path has nothing mounted or otherwise does not appear in /proc/mounts as a mountpoint.

    매개변수
    mountpoint String

    보고
    ITestDevice.MountPointInfo A ERROR(/List) of MountPointInfo containing the information in "/proc/mounts"

    던지다
    DeviceNotAvailableException

    getMountPointInfo

    public  getMountPointInfo ()

    Returns a parsed version of the information in /proc/mounts on the device

    보고
    A ERROR(/List) of MountPointInfo containing the information in "/proc/mounts"

    던지다
    DeviceNotAvailableException

    getOptions

    public TestDeviceOptions getOptions ()

    Fetch the test options for the device.

    보고
    TestDeviceOptions TestDeviceOptions related to the device under test.

    getPartitionFreeSpace

    public long getPartitionFreeSpace (String partition)

    Helper method to determine amount of free space on device partition.

    매개변수
    partition String

    보고
    long the amount of free space in KB

    던지다
    DeviceNotAvailableException

    getPrimaryUserId

    public Integer getPrimaryUserId ()

    Returns the primary user id.

    보고
    Integer the userId of the primary user if there is one, and null if there is no primary user.

    던지다
    DeviceNotAvailableException

    getProcessByName

    public ProcessInfo getProcessByName (String processName)

    Helper method runs the "pidof" and "stat" command and returns ProcessInfo object with PID and process start time of the given process.

    매개변수
    processName String : the proces name String.

    보고
    ProcessInfo ProcessInfo of given processName

    던지다
    DeviceNotAvailableException

    getProcessPid

    public String getProcessPid (String process)

    Returns the pid of the service or null if something went wrong.

    매개변수
    process String : The proces name String.

    보고
    String

    던지다
    DeviceNotAvailableException

    getProductType

    public String getProductType ()

    Convenience method to get the product type of this device.

    This method will work if device is in either adb or fastboot mode.

    보고
    String the String product type name. Will not be null

    던지다
    DeviceNotAvailableException

    getProductVariant

    public String getProductVariant ()

    Convenience method to get the product variant of this device.

    This method will work if device is in either adb or fastboot mode.

    보고
    String the String product variant name or null if it cannot be determined

    던지다
    DeviceNotAvailableException

    getProperty

    public String getProperty (String name)

    Retrieve the given property value from the device.

    매개변수
    name String : the property name

    보고
    String the property value or null if it does not exist

    던지다
    DeviceNotAvailableException

    getRecoveryMode

    public ITestDevice.RecoveryMode getRecoveryMode ()

    Get the current recovery mode used for the device.

    보고
    ITestDevice.RecoveryMode the current recovery mode used for the device.

    getScreenshot

    public InputStreamSource getScreenshot (String format)

    Grabs a screenshot from the device. Recommended to use getScreenshot(format) instead with JPEG encoding for smaller size

    매개변수
    format String : supported PNG, JPEG

    보고
    InputStreamSource a InputStreamSource of the screenshot in format, or null if the screenshot was not successful.

    던지다
    DeviceNotAvailableException

    getScreenshot

    public InputStreamSource getScreenshot (long displayId)

    Grabs a screenshot from the device given display id. Format is PNG.

    TODO: extend the implementations above to support 'format' and 'rescale'

    매개변수
    displayId long : the display id of the screen to get screenshot from.

    보고
    InputStreamSource a InputStreamSource of the screenshot in format, or null if the screenshot was not successful.

    던지다
    DeviceNotAvailableException

    getScreenshot

    public InputStreamSource getScreenshot (String format, 
                    boolean rescale)

    Grabs a screenshot from the device. Recommended to use getScreenshot(String) instead with JPEG encoding for smaller size.

    매개변수
    format String : supported PNG, JPEG

    rescale boolean : if screenshot should be rescaled to reduce the size of resulting image

    보고
    InputStreamSource a InputStreamSource of the screenshot in format, or null if the screenshot was not successful.

    던지다
    DeviceNotAvailableException

    getScreenshot

    public InputStreamSource getScreenshot ()

    Grabs a screenshot from the device.

    보고
    InputStreamSource a InputStreamSource of the screenshot in png format, or null if the screenshot was not successful.

    던지다
    DeviceNotAvailableException

    getSerialNumber

    public String getSerialNumber ()

    Convenience method to get serial number of this device.

    보고
    String the String serial number

    getSetting

    public String getSetting (int userId, 
                    String namespace, 
                    String key)

    Return the value of the requested setting. namespace must be one of: {"system", "secure", "global"}

    매개변수
    userId int

    namespace String

    key String

    보고
    String the value associated with the namespace:key of a user. Null if not found.

    던지다
    DeviceNotAvailableException

    getSetting

    public String getSetting (String namespace, 
                    String key)

    See getSetting(int, String, String) and performed on system user.

    매개변수
    namespace String

    key String

    보고
    String

    던지다
    DeviceNotAvailableException

    getSimOperator

    public String getSimOperator ()

    Return the SIM card operator or null if not available or if device is not available.

    보고
    String

    getSimState

    public String getSimState ()

    Return the SIM card state or null if not available or device is not available.

    보고
    String

    getTombstones

    public  getTombstones ()

    Fetch and return the list of tombstones from the devices. Requires root.

    method is best-effort so if one tombstone fails to be pulled for any reason it will be missing from the list. Only a DeviceNotAvailableException will terminate the method early.

    보고
    A list of tombstone files, empty if no tombstone.

    던지다
    DeviceNotAvailableException

    getTotalMemory

    public long getTotalMemory ()

    Returns total physical memory size in bytes or -1 in case of internal error

    보고
    long

    getUninstallablePackageNames

    public  getUninstallablePackageNames ()

    Fetch the application package names that can be uninstalled. This is presently defined as non-system packages, and updated system packages.

    보고
    ERROR(/Set) of uninstallable String package names currently installed on the device.

    던지다
    DeviceNotAvailableException

    getUseFastbootErase

    public boolean getUseFastbootErase ()

    Get whether to use fastboot erase or fastboot format to wipe a partition on the device.

    보고
    boolean true if fastboot erase will be used or false if fastboot format will be used.

    getUserFlags

    public int getUserFlags (int userId)

    Find and return the flags of a given user. Flags are defined in "android.content.pm.UserInfo" class in Android Open Source Project.

    매개변수
    userId int

    보고
    int the flags associated with the userId provided if found, -10000 in any other cases.

    던지다
    DeviceNotAvailableException

    getUserInfos

    public  getUserInfos ()

    Gets the Map of useId to UserInfo on the device. Will throw DeviceRuntimeException if output from device is not as expected.

    보고
    the list of UserInfo objects.

    던지다
    DeviceNotAvailableException

    getUserSerialNumber

    public int getUserSerialNumber (int userId)

    Return the serial number associated to the userId if found, -10000 in any other cases.

    매개변수
    userId int

    보고
    int

    던지다
    DeviceNotAvailableException

    handleAllocationEvent

    public IManagedTestDevice.DeviceEventResponse handleAllocationEvent (DeviceEvent event)

    Process the given DeviceEvent . May transition device to new state. Will inform the IDeviceMonitor of any state transitions.

    Process the DeviceEvent, which may or may not transition this device to a new allocation state.

    매개변수
    event DeviceEvent

    보고
    IManagedTestDevice.DeviceEventResponse

    hasFeature

    public boolean hasFeature (String feature)

    Check if a feature is available on a device.

    매개변수
    feature String : which format should be "feature: " or " " directly.

    보고
    boolean True if feature is found, false otherwise.

    던지다
    DeviceNotAvailableException

    installPackage

    public String installPackage (File packageFile, 
                    boolean reinstall, 
                    String... extraArgs)

    Install an Android package on device.

    매개변수
    packageFile File : the apk file to install

    reinstall boolean : true if a reinstall should be performed

    extraArgs String : optional extra arguments to pass. See 'adb shell pm -h' for available options.

    보고
    String a String with an error code, or null if success.

    던지다
    DeviceNotAvailableException

    installPackage

    public String installPackage (File packageFile, 
                    boolean reinstall, 
                    boolean grantPermissions, 
                    String... extraArgs)

    Install an Android package on device.

    Note: Only use cases that requires explicit control of granting runtime permission at install time should call this function.

    매개변수
    packageFile File : the apk file to install

    reinstall boolean : true if a reinstall should be performed

    grantPermissions boolean : if all runtime permissions should be granted at install time

    extraArgs String : optional extra arguments to pass. See 'adb shell pm -h' for available options.

    보고
    String a String with an error code, or null if success.

    던지다
    DeviceNotAvailableException

    installPackageForUser

    public String installPackageForUser (File packageFile, 
                    boolean reinstall, 
                    int userId, 
                    String... extraArgs)

    Install an Android package on device for a given user.

    매개변수
    packageFile File : the apk file to install

    reinstall boolean : true if a reinstall should be performed

    userId int : the integer user id to install for.

    extraArgs String : optional extra arguments to pass. See 'adb shell pm -h' for available options.

    보고
    String a String with an error code, or null if success.

    던지다
    DeviceNotAvailableException

    installPackageForUser

    public String installPackageForUser (File packageFile, 
                    boolean reinstall, 
                    boolean grantPermissions, 
                    int userId, 
                    String... extraArgs)

    Install an Android package on device for a given user.

    Note: Only use cases that requires explicit control of granting runtime permission at install time should call this function.

    매개변수
    packageFile File : the apk file to install

    reinstall boolean : true if a reinstall should be performed

    grantPermissions boolean : if all runtime permissions should be granted at install time

    userId int : the integer user id to install for.

    extraArgs String : optional extra arguments to pass. See 'adb shell pm -h' for available options.

    보고
    String a String with an error code, or null if success.

    던지다
    DeviceNotAvailableException

    isAdbRoot

    public boolean isAdbRoot ()

    보고
    boolean

    던지다
    DeviceNotAvailableException

    isAdbTcp

    public boolean isAdbTcp ()

    보고
    boolean

    isAppEnumerationSupported

    public boolean isAppEnumerationSupported ()

    Check whether platform on device supports app enumeration

    보고
    boolean True if app enumeration is supported, false otherwise

    던지다
    DeviceNotAvailableException

    isDeviceEncrypted

    public boolean isDeviceEncrypted ()

    Returns if the device is encrypted.

    보고
    boolean true if the device is encrypted.

    던지다
    DeviceNotAvailableException

    isDirectory

    public boolean isDirectory (String path)

    Return True if the path on the device is a directory, false otherwise.

    매개변수
    path String

    보고
    boolean

    던지다
    DeviceNotAvailableException

    isEnableAdbRoot

    public boolean isEnableAdbRoot ()

    보고
    boolean true if adb root should be enabled on device

    isEncryptionSupported

    public boolean isEncryptionSupported ()

    Returns if encryption is supported on the device.

    보고
    boolean true if the device supports encryption.

    던지다
    DeviceNotAvailableException

    isExecutable

    public boolean isExecutable (String fullPath)

    Returns True if the file path on the device is an executable file, false otherwise.

    매개변수
    fullPath String

    보고
    boolean

    던지다
    DeviceNotAvailableException

    isFastbootEnabled

    public boolean isFastbootEnabled ()

    Return if fastboot is available for the device.

    보고
    boolean

    isHeadless

    public boolean isHeadless ()

    Return true if the device is headless (no screen), false otherwise.

    보고
    boolean

    던지다
    DeviceNotAvailableException

    isMultiUserSupported

    public boolean isMultiUserSupported ()

    Determines if multi user is supported.

    보고
    boolean true if multi user is supported, false otherwise

    던지다
    DeviceNotAvailableException

    isPackageInstalled

    public boolean isPackageInstalled (String packageName, 
                    String userId)

    Query the device for a given package name and given user id to check if it's currently installed or not for that user.

    매개변수
    packageName String : the package we are checking if it's installed.

    userId String : The user id we are checking the package is installed for. If null, primary user zero will be used.

    보고
    boolean True if the package is reported as installed. False otherwise.

    던지다
    DeviceNotAvailableException

    isPackageInstalled

    public boolean isPackageInstalled (String packageName)

    Query the device for a given package name to check if it's currently installed or not.

    매개변수
    packageName String

    보고
    boolean True if the package is reported as installed. False otherwise.

    던지다
    DeviceNotAvailableException

    isRuntimePermissionSupported

    public boolean isRuntimePermissionSupported ()

    Check whether platform on device supports runtime permission granting

    보고
    boolean True if runtime permission are supported, false otherwise.

    던지다
    DeviceNotAvailableException

    isStateBootloaderOrFastbootd

    public boolean isStateBootloaderOrFastbootd ()

    Returns true if device is in TestDeviceState#FASTBOOT or TestDeviceState.FASTBOOTD .

    보고
    boolean

    isUserRunning

    public boolean isUserRunning (int userId)

    Check if a given user is running.

    매개변수
    userId int

    보고
    boolean True if the user is running, false in every other cases.

    던지다
    DeviceNotAvailableException

    isUserSecondary

    public boolean isUserSecondary (int userId)

    Return whether the specified user is a secondary user according to it's flags.

    매개변수
    userId int

    보고
    boolean true if the user is secondary, false otherwise.

    던지다
    DeviceNotAvailableException

    isWifiEnabled

    public boolean isWifiEnabled ()

    Test if wifi is enabled.

    Checks if wifi is enabled on device. Useful for asserting wifi status before tests that shouldn't run with wifi, eg mobile data tests.

    보고
    boolean true if wifi is enabled. false if disabled

    던지다
    DeviceNotAvailableException

    listDisplayIds

    public  listDisplayIds ()

    Collect the list of available displays id on the device as reported by "dumpsys SurfaceFlinger".

    보고
    The list of displays. Default always returns the default display 0.

    던지다
    DeviceNotAvailableException

    listUsers

    public  listUsers ()

    Gets the list of users on the device. Will throw DeviceRuntimeException if output from device is not as expected.

    보고
    the list of user ids.

    던지다
    DeviceNotAvailableException

    logAnrs

    public boolean logAnrs (ITestLogger logger)

    Collects and log ANRs from the device.

    매개변수
    logger ITestLogger : an ITestLogger to log the ANRs.

    보고
    boolean True if the logging was successful, false otherwise.

    던지다
    DeviceNotAvailableException

    logBugreport

    public boolean logBugreport (String dataName, 
                    ITestLogger listener)

    Helper method to take a bugreport and log it to the reporters.

    매개변수
    dataName String : name under which the bugreport will be reported.

    listener ITestLogger : an ITestLogger to log the bugreport.

    보고
    boolean True if the logging was successful, false otherwise.

    logOnDevice

    public void logOnDevice (String tag, 
                    Log.LogLevel level, 
                    String format, 
                    Object... args)

    Log a message in the logcat of the device. This is a safe call that will not throw even if the logging fails.

    매개변수
    tag String : The tag under which we log our message in the logcat.

    level Log.LogLevel : The debug level of the message in the logcat.

    format String : The message format.

    args Object : the args to be replaced via String.format().

    nonBlockingReboot

    public void nonBlockingReboot ()

    Issues a command to reboot device and returns on command complete and when device is no longer visible to adb.

    던지다
    DeviceNotAvailableException

    postAdbRootAction

    public void postAdbRootAction ()

    Override if the device needs some specific actions to be taken after adb root and before the device is back online. Default implementation doesn't include any addition actions. adb root is not guaranteed to be enabled at this stage.

    던지다
    DeviceNotAvailableException

    postAdbUnrootAction

    public void postAdbUnrootAction ()

    Override if the device needs some specific actions to be taken after adb unroot and before the device is back online. Default implementation doesn't include any additional actions. adb root is not guaranteed to be disabled at this stage.

    던지다
    DeviceNotAvailableException

    postBootSetup

    public void postBootSetup ()

    Perform instructions to configure device for testing that after every boot.

    Should be called after device is fully booted/available

    In normal circumstances this method doesn't need to be called explicitly, as implementations should perform these steps automatically when performing a reboot.

    Where it may need to be called is when device reboots due to other events (eg when a fastboot update command has completed)

    던지다
    DeviceNotAvailableException

    postInvocationTearDown

    public void postInvocationTearDown (Throwable exception)

    Extra steps for device specific required clean up that will be executed after the invocation is done.

    매개변수
    exception Throwable : if any, the final exception raised by the invocation failure.

    preInvocationSetup

    public void preInvocationSetup (IBuildInfo info, 
                    MultiMap<String, String> attributes)

    Extra steps for device specific required setup that will be executed on the device prior to the invocation flow.

    매개변수
    info IBuildInfo : The IBuildInfo of the device.

    attributes MultiMap : The attributes stored in the invocation context

    던지다
    DeviceNotAvailableException
    TargetSetupError

    pullDir

    public boolean pullDir (String deviceFilePath, 
                    File localDir)

    Recursively pull directory contents from device.

    매개변수
    deviceFilePath String : the absolute file path of the remote source

    localDir File : the local directory to pull files into

    보고
    boolean true if file was pulled successfully. false otherwise.

    던지다
    DeviceNotAvailableException

    pullFile

    public boolean pullFile (String remoteFilePath, 
                    File localFile)

    Retrieves a file off device.

    매개변수
    remoteFilePath String : the absolute path to file on device.

    localFile File : the local file to store contents in. If non-empty, contents will be replaced.

    보고
    boolean true if file was retrieved successfully. false otherwise.

    던지다
    DeviceNotAvailableException

    pullFile

    public File pullFile (String remoteFilePath, 
                    int userId)

    Retrieves a file off device, stores it in a local temporary ERROR(/File) , and returns that File .

    매개변수
    remoteFilePath String : the absolute path to file on device.

    userId int : The user id to pull from

    보고
    File A ERROR(/File) containing the contents of the device file, or null if the copy failed for any reason (including problems with the host filesystem)

    던지다
    DeviceNotAvailableException

    pullFile

    public File pullFile (String remoteFilePath)

    Retrieves a file off device, stores it in a local temporary ERROR(/File) , and returns that File .

    매개변수
    remoteFilePath String : the absolute path to file on device.

    보고
    File A ERROR(/File) containing the contents of the device file, or null if the copy failed for any reason (including problems with the host filesystem)

    던지다
    DeviceNotAvailableException

    pullFile

    public boolean pullFile (String remoteFilePath, 
                    File localFile, 
                    int userId)

    Retrieves a file off device.

    매개변수
    remoteFilePath String : the absolute path to file on device.

    localFile File : the local file to store contents in. If non-empty, contents will be replaced.

    userId int : The user id to pull from

    보고
    boolean true if file was retrieved successfully. false otherwise.

    던지다
    DeviceNotAvailableException

    pullFileContents

    public String pullFileContents (String remoteFilePath)

    Retrieves a file off device, and returns the contents.

    매개변수
    remoteFilePath String : the absolute path to file on device.

    보고
    String A String containing the contents of the device file, or null if the copy failed for any reason (including problems with the host filesystem)

    던지다
    DeviceNotAvailableException

    pullFileFromExternal

    public File pullFileFromExternal (String remoteFilePath)

    A convenience method to retrieve a file from the device's external storage, stores it in a local temporary ERROR(/File) , and return a reference to that File .

    매개변수
    remoteFilePath String : the path to file on device, relative to the device's external storage mountpoint

    보고
    File A ERROR(/File) containing the contents of the device file, or null if the copy failed for any reason (including problems with the host filesystem)

    던지다
    DeviceNotAvailableException

    pushDir

    public boolean pushDir (File localFileDir, 
                    String deviceFilePath, 
                     excludedDirectories)

    Recursively push directory contents to device while excluding some directories that are filtered.

    매개변수
    localFileDir File : the local directory to push

    deviceFilePath String : the absolute file path of the remote destination

    excludedDirectories : Set of excluded directories names that shouldn't be pushed.

    보고
    boolean true if file was pushed successfully. false otherwise.

    던지다
    DeviceNotAvailableException

    pushDir

    public boolean pushDir (File localFileDir, 
                    String deviceFilePath)

    Recursively push directory contents to device.

    매개변수
    localFileDir File : the local directory to push

    deviceFilePath String : the absolute file path of the remote destination

    보고
    boolean true if file was pushed successfully. false otherwise.

    던지다
    DeviceNotAvailableException

    pushFile

    public boolean pushFile (File localFile, 
                    String remoteFilePath, 
                    boolean evaluateContentProviderNeeded)

    Variant of pushFile(File, String) which can optionally consider evaluating the need for the content provider.

    매개변수
    localFile File : the local file to push

    remoteFilePath String : the remote destination absolute file path

    evaluateContentProviderNeeded boolean : whether to check if we need the content provider

    보고
    boolean true if file was pushed successfully. false otherwise.

    던지다
    DeviceNotAvailableException

    pushFile

    public boolean pushFile (File localFile, 
                    String remoteFilePath)

    Push a file to device. By default using a content provider.

    매개변수
    localFile File : the local file to push

    remoteFilePath String : the remote destination absolute file path

    보고
    boolean true if file was pushed successfully. false otherwise.

    던지다
    DeviceNotAvailableException

    pushString

    public boolean pushString (String contents, 
                    String remoteFilePath)

    Push file created from a string to device

    매개변수
    contents String : the contents of the file to push

    remoteFilePath String : the remote destination absolute file path

    보고
    boolean true if string was pushed successfully. false otherwise.

    던지다
    DeviceNotAvailableException

    reboot

    public void reboot (String reason)

    Reboots the device into adb mode with given reason to be persisted across reboot.

    Blocks until device becomes available.

    Last reboot reason can be obtained by querying sys.boot.reason propety.

    매개변수
    reason String : a reason for this reboot, or null if no reason is specified.

    던지다
    DeviceNotAvailableException

    reboot

    public void reboot ()

    Reboots the device into adb mode.

    Blocks until device becomes available.

    던지다
    DeviceNotAvailableException

    rebootIntoBootloader

    public void rebootIntoBootloader ()

    Reboots the device into bootloader mode.

    Blocks until device is in bootloader mode.

    던지다
    DeviceNotAvailableException

    rebootIntoFastbootd

    public void rebootIntoFastbootd ()

    Reboots the device into fastbootd mode.

    Blocks until device is in fastbootd mode.

    던지다
    DeviceNotAvailableException

    rebootIntoRecovery

    public void rebootIntoRecovery ()

    Reboots the device into adb recovery mode.

    Blocks until device enters recovery

    던지다
    DeviceNotAvailableException

    rebootIntoSideload

    public void rebootIntoSideload ()

    Reboots the device into adb sideload mode (note that this is a special mode under recovery)

    Blocks until device enters sideload mode

    던지다
    DeviceNotAvailableException

    rebootIntoSideload

    public void rebootIntoSideload (boolean autoReboot)

    Reboots the device into adb sideload mode (note that this is a special mode under recovery)

    Blocks until device enters sideload mode

    매개변수
    autoReboot boolean : whether to automatically reboot the device after sideload

    던지다
    DeviceNotAvailableException

    rebootUntilOnline

    public void rebootUntilOnline ()

    An alternate to reboot() that only blocks until device is online ie visible to adb.

    던지다
    DeviceNotAvailableException

    rebootUntilOnline

    public void rebootUntilOnline (String reason)

    An alternate to reboot() that only blocks until device is online ie visible to adb.

    매개변수
    reason String : a reason for this reboot, or null if no reason is specified.

    던지다
    DeviceNotAvailableException

    rebootUserspace

    public void rebootUserspace ()

    Reboots only userspace part of device.

    Blocks until device becomes available.

    WARNING. Userspace reboot is currently under active development, use it on your own risk.

    던지다
    DeviceNotAvailableException

    rebootUserspaceUntilOnline

    public void rebootUserspaceUntilOnline ()

    An alternate to rebootUserspace() ()} that only blocks until device is online ie visible to adb.

    던지다
    DeviceNotAvailableException

    recoverDevice

    public boolean recoverDevice ()

    Attempts to recover device communication.

    보고
    boolean True if recovery attempted and successful, returns False if recovery was skipped

    던지다
    DeviceNotAvailableException if device is no longer available

    remountSystemWritable

    public void remountSystemWritable ()

    Make the system partition on the device writable. May reboot the device.

    던지다
    DeviceNotAvailableException

    remountVendorWritable

    public void remountVendorWritable ()

    Make the vendor partition on the device writable. May reboot the device.

    던지다
    DeviceNotAvailableException

    removeAdmin

    public boolean removeAdmin (String componentName, 
                    int userId)

    Remove given device admin in given user and return true if it is successful, false otherwise.

    매개변수
    componentName String : of device admin to be removed.

    userId int : of user that the device admin lives in.

    보고
    boolean True if it is successful, false otherwise.

    던지다
    DeviceNotAvailableException

    removeOwners

    public void removeOwners ()

    Remove all existing device profile owners with the best effort.

    던지다
    DeviceNotAvailableException

    removeUser

    public boolean removeUser (int userId)

    Remove a given user from the device.

    매개변수
    userId int : of the user to remove

    보고
    boolean true if we were successful in removing the user, false otherwise.

    던지다
    DeviceNotAvailableException

    resetContentProviderSetup

    public void resetContentProviderSetup ()

    Reset the flag for content provider setup in order to trigger it again.

    runInstrumentationTests

    public boolean runInstrumentationTests (IRemoteAndroidTestRunner runner, 
                    ITestLifeCycleReceiver... listeners)

    Convenience method for performing ERROR(/#runInstrumentationTests(com.android.ddmlib.testrunner.IRemoteAndroidTestRunner,Collection)) with one or more listeners passed as parameters.

    매개변수
    runner IRemoteAndroidTestRunner : the IRemoteAndroidTestRunner which runs the tests

    listeners ITestLifeCycleReceiver : the test result listener(s)

    보고
    boolean true if test command completed. false if it failed to complete, but recovery succeeded

    던지다
    DeviceNotAvailableException

    runInstrumentationTests

    public boolean runInstrumentationTests (IRemoteAndroidTestRunner runner, 
                     listeners)

    Runs instrumentation tests, and provides device recovery.

    If connection with device is lost before test run completes, and recovery succeeds, all listeners will be informed of testRunFailed and "false" will be returned. The test command will not be rerun. It is left to callers to retry if necessary.

    If connection with device is lost before test run completes, and recovery fails, all listeners will be informed of testRunFailed and DeviceNotAvailableException will be thrown.

    매개변수
    runner IRemoteAndroidTestRunner : the IRemoteAndroidTestRunner which runs the tests

    listeners : the test result listeners

    보고
    boolean true if test command completed. false if it failed to complete due to device communication exception, but recovery succeeded

    던지다
    DeviceNotAvailableException

    runInstrumentationTestsAsUser

    public boolean runInstrumentationTestsAsUser (IRemoteAndroidTestRunner runner, 
                    int userId, 
                    ITestLifeCycleReceiver... listeners)

    Same as ITestDevice#runInstrumentationTests(IRemoteAndroidTestRunner, ITestLifeCycleReceiver...) but runs the test for a given user.

    매개변수
    runner IRemoteAndroidTestRunner

    userId int

    listeners ITestLifeCycleReceiver

    보고
    boolean

    던지다
    DeviceNotAvailableException

    runInstrumentationTestsAsUser

    public boolean runInstrumentationTestsAsUser (IRemoteAndroidTestRunner runner, 
                    int userId, 
                     listeners)

    Same as ERROR(ITestDevice#runInstrumentationTests(IRemoteAndroidTestRunner, Collection)/com.android.tradefed.device.ITestDevice#runInstrumentationTests(com.android.ddmlib.testrunner.IRemoteAndroidTestRunner,Collection) ITestDevice#runInstrumentationTests(IRemoteAndroidTestRunner, Collection)) but runs the test for the given user.

    매개변수
    runner IRemoteAndroidTestRunner

    userId int

    listeners

    보고
    boolean

    던지다
    DeviceNotAvailableException

    setConfiguration

    public void setConfiguration (IConfiguration configuration)

    Injects the IConfiguration in use.

    매개변수
    configuration IConfiguration

    setDate

    public void setDate (Date date)

    Sets the date on device

    Note: setting date on device requires root

    매개변수
    date Date : specify a particular date; will use host date if null

    던지다
    DeviceNotAvailableException

    setDeviceOwner

    public boolean setDeviceOwner (String componentName, 
                    int userId)

    Set a device admin component as device owner in given user.

    매개변수
    componentName String : of device admin to be device owner.

    userId int : of the user that the device owner lives in.

    보고
    boolean True if it is successful, false otherwise.

    던지다
    DeviceNotAvailableException

    setDeviceState

    public void setDeviceState (TestDeviceState deviceState)

    Update the device's state.

    매개변수
    deviceState TestDeviceState : the TestDeviceState

    setEmulatorOutputStream

    public void setEmulatorOutputStream (SizeLimitedOutputStream output)

    For emulator set SizeLimitedOutputStream to log output

    매개변수
    output SizeLimitedOutputStream : to log the output

    setEmulatorProcess

    public void setEmulatorProcess (Process p)

    Sets the Process , when this device is an emulator.

    매개변수
    p Process

    setFastbootEnabled

    public void setFastbootEnabled (boolean fastbootEnabled)

    Set the fastboot option for the device. Should be set when device is first allocated.

    매개변수
    fastbootEnabled boolean : whether fastboot is available for the device or not

    setFastbootPath

    public void setFastbootPath (String fastbootPath)

    Sets the path to the fastboot binary that should be used. Still requires isFastbootEnabled() to be true, to have fastboot functions enabled.

    매개변수
    fastbootPath String

    setIDevice

    public void setIDevice (IDevice newDevice)

    Update the IDevice associated with this ITestDevice.

    The new IDevice must refer the same physical device as the current reference. This method will be called if DDMS has allocated a new IDevice

    매개변수
    newDevice IDevice : the IDevice

    setOptions

    public void setOptions (TestDeviceOptions options)

    Set the TestDeviceOptions for the device

    매개변수
    options TestDeviceOptions

    setProperty

    public boolean setProperty (String propKey, 
                    String propValue)

    Sets the given property value on the device. Requires adb root is true.

    매개변수
    propKey String : The key targeted to be set.

    propValue String : The property value to be set.

    보고
    boolean returns True if the setprop command was successful, False otherwise.

    던지다
    DeviceNotAvailableException

    setRecovery

    public void setRecovery (IDeviceRecovery recovery)

    Set the IDeviceRecovery to use for this device. Should be set when device is first allocated.

    매개변수
    recovery IDeviceRecovery : the IDeviceRecovery

    setRecoveryMode

    public void setRecoveryMode (ITestDevice.RecoveryMode mode)

    Set the current recovery mode to use for the device.

    Used to control what recovery method to use when a device communication problem is encountered. Its recommended to only use this method sparingly when needed (for example, when framework is down, etc

    매개변수
    mode ITestDevice.RecoveryMode : whether 'recover till online only' mode should be on or not.

    setSetting

    public void setSetting (String namespace, 
                    String key, 
                    String value)

    See setSetting(int, String, String, String) and performed on system user.

    매개변수
    namespace String

    key String

    value String

    던지다
    DeviceNotAvailableException

    setSetting

    public void setSetting (int userId, 
                    String namespace, 
                    String key, 
                    String value)

    Add a setting value to the namespace of a given user. Some settings will only be available after a reboot. namespace must be one of: {"system", "secure", "global"}

    매개변수
    userId int

    namespace String

    key String

    value String

    던지다
    DeviceNotAvailableException

    setUseFastbootErase

    public void setUseFastbootErase (boolean useFastbootErase)

    Set whether to use fastboot erase or fastboot format to wipe a partition on the device.

    매개변수
    useFastbootErase boolean : true if fastboot erase should be used or false if fastboot format should be used.

    startLogcat

    public void startLogcat ()

    Start capturing logcat output from device in the background.

    Will have no effect if logcat output is already being captured. Data can be later retrieved via getLogcat.

    When the device is no longer in use, stopLogcat() must be called.

    startLogcat() and stopLogcat() do not normally need to be called when within a TF invocation context, as the TF framework will start and stop logcat.

    startUser

    public boolean startUser (int userId)

    Starts a given user in the background if it is currently stopped. If the user is already running in the background, this method is a NOOP.

    매개변수
    userId int : of the user to start in the background

    보고
    boolean true if the user was successfully started in the background.

    던지다
    DeviceNotAvailableException

    startUser

    public boolean startUser (int userId, 
                    boolean waitFlag)

    Starts a given user in the background if it is currently stopped. If the user is already running in the background, this method is a NOOP. Possible to provide extra flag to wait for the operation to have effect.

    매개변수
    userId int : of the user to start in the background

    waitFlag boolean : will make the command wait until user is started and unlocked.

    보고
    boolean true if the user was successfully started in the background.

    던지다
    DeviceNotAvailableException

    stopEmulatorOutput

    public void stopEmulatorOutput ()

    Close and delete the emulator output.

    stopLogcat

    public void stopLogcat ()

    Stop capturing logcat output from device, and discard currently saved logcat data.

    Will have no effect if logcat output is not being captured.

    stopUser

    public boolean stopUser (int userId)

    Stops a given user. If the user is already stopped, this method is a NOOP. Cannot stop current and system user.

    매개변수
    userId int : of the user to stop.

    보고
    boolean true if the user was successfully stopped.

    던지다
    DeviceNotAvailableException

    stopUser

    public boolean stopUser (int userId, 
                    boolean waitFlag, 
                    boolean forceFlag)

    Stop a given user. Possible to provide extra flags to wait for the operation to have effect, and force terminate the user. Cannot stop current and system user.

    매개변수
    userId int : of the user to stop.

    waitFlag boolean : will make the command wait until user is stopped.

    forceFlag boolean : will force stop the user.

    보고
    boolean true if the user was successfully stopped.

    던지다
    DeviceNotAvailableException

    switchToAdbTcp

    public String switchToAdbTcp ()

    Switch device to adb-over-tcp mode.

    보고
    String the tcp serial number or null if device could not be switched

    던지다
    DeviceNotAvailableException

    switchToAdbUsb

    public boolean switchToAdbUsb ()

    Switch device to adb over usb mode.

    보고
    boolean true if switch was successful, false otherwise.

    던지다
    DeviceNotAvailableException

    switchUser

    public boolean switchUser (int userId)

    Switch to another userId with a default timeout. switchUser(int, long) .

    매개변수
    userId int

    보고
    boolean True if the new userId matches the userId provider. False otherwise.

    던지다
    DeviceNotAvailableException

    switchUser

    public boolean switchUser (int userId, 
                    long timeout)

    Switch to another userId with the provided timeout as deadline. Attempt to disable keyguard after user change is successful.

    매개변수
    userId int

    timeout long : to wait before returning false for switch-user failed.

    보고
    boolean True if the new userId matches the userId provider. False otherwise.

    던지다
    DeviceNotAvailableException

    syncFiles

    public boolean syncFiles (File localFileDir, 
                    String deviceFilePath)

    Incrementally syncs the contents of a local file directory to device.

    Decides which files to push by comparing timestamps of local files with their remote equivalents. Only 'newer' or non-existent files will be pushed to device. Thus overhead should be relatively small if file set on device is already up to date.

    Hidden files (with names starting with ".") will be ignored.

    Example usage: syncFiles("/tmp/files", "/sdcard") will created a /sdcard/files directory if it doesn't already exist, and recursively push the /tmp/files contents to /sdcard/files.

    매개변수
    localFileDir File : the local file directory containing files to recursively push.

    deviceFilePath String : the remote destination absolute file path root. All directories in thos file path must be readable. ie pushing to /data/local/tmp when adb is not root will fail

    보고
    boolean true if files were synced successfully. false otherwise.

    던지다
    DeviceNotAvailableException

    takeBugreport

    public Bugreport takeBugreport ()

    Take a bugreport and returns it inside a Bugreport object to handle it. Return null in case of issue.

    File referenced in the Bugreport object need to be cleaned via Bugreport#close() .

    보고
    Bugreport

    uninstallPackage

    public String uninstallPackage (String packageName)

    Uninstall an Android package from device.

    매개변수
    packageName String : the Android package to uninstall

    보고
    String a String with an error code, or null if success.

    던지다
    DeviceNotAvailableException

    uninstallPackageForUser

    public String uninstallPackageForUser (String packageName, 
                    int userId)

    Uninstall an Android package from device for a given user.

    매개변수
    packageName String : the Android package to uninstall

    userId int : the integer user id to uninstall for.

    보고
    String a String with an error code, or null if success.

    던지다
    DeviceNotAvailableException

    unlockDevice

    public boolean unlockDevice ()

    Unlocks the device if the device is in an encrypted state.

    This method may restart the framework but will not call postBootSetup() . Therefore, the device might not be fully ready to be tested when this method returns.

    보고
    boolean true if successful or if the device is unencrypted.

    던지다
    DeviceNotAvailableException

    waitForBootComplete

    public boolean waitForBootComplete (long timeOut)

    Blocks until the device's boot complete flag is set.

    매개변수
    timeOut long : time in msecs to wait for the flag to be set

    보고
    boolean true if device's boot complete flag is set within the timeout

    던지다
    DeviceNotAvailableException

    waitForDeviceAvailable

    public boolean waitForDeviceAvailable ()

    Waits for the device to be responsive and available for testing. Uses default timeout.

    보고
    boolean True if device is available, False if recovery is disabled and unavailable.

    던지다
    DeviceNotAvailableException

    waitForDeviceAvailable

    public boolean waitForDeviceAvailable (long waitTime)

    Waits for the device to be responsive and available for testing.

    매개변수
    waitTime long : the time in ms to wait

    보고
    boolean True if device is available, False if recovery is disabled and unavailable.

    던지다
    DeviceNotAvailableException

    waitForDeviceBootloader

    public void waitForDeviceBootloader ()

    Blocks until device is visible via fastboot. Use default timeout.

    던지다
    DeviceNotAvailableException

    waitForDeviceInRecovery

    public boolean waitForDeviceInRecovery (long waitTime)

    Blocks for the device to be in the 'adb recovery' state (note this is distinct from IDeviceRecovery ).

    매개변수
    waitTime long : the time in ms to wait

    보고
    boolean true if device boots into recovery before time expires. false otherwise

    waitForDeviceInSideload

    public boolean waitForDeviceInSideload (long waitTime)

    Blocks for the device to be in the 'adb sideload' state

    매개변수
    waitTime long : the time in ms to wait

    보고
    boolean true if device boots into sideload before time expires. false otherwise

    waitForDeviceNotAvailable

    public boolean waitForDeviceNotAvailable (long waitTime)

    Blocks for the device to be not available ie missing from adb

    매개변수
    waitTime long : the time in ms to wait

    보고
    boolean true if device becomes not available before time expires. false otherwise

    waitForDeviceOnline

    public void waitForDeviceOnline ()

    Blocks until device is visible via adb. Uses default timeout

    Note the device may not necessarily be responsive to commands on completion. Use waitForDeviceAvailable() instead.

    던지다
    DeviceNotAvailableException

    waitForDeviceOnline

    public void waitForDeviceOnline (long waitTime)

    Blocks until device is visible via adb.

    Note the device may not necessarily be responsive to commands on completion. Use waitForDeviceAvailable() instead.

    매개변수
    waitTime long : the time in ms to wait

    던지다
    DeviceNotAvailableException

    waitForDeviceShell

    public boolean waitForDeviceShell (long waitTime)

    Waits for device to be responsive to a basic adb shell command.

    매개변수
    waitTime long : the time in ms to wait

    보고
    boolean true if device becomes responsive before waitTime elapses.

    Protected methods

    checkApiLevelAgainst

    protected void checkApiLevelAgainst (String feature, 
                    int strictMinLevel)

    매개변수
    feature String

    strictMinLevel int

    createRebootDeviceAction

    protected NativeDevice.RebootDeviceAction createRebootDeviceAction (NativeDevice.RebootMode rebootMode, 
                    String reason)

    Create a RebootDeviceAction to be used when performing a reboot action.

    매개변수
    rebootMode NativeDevice.RebootMode : a mode of this reboot.

    reason String : for this reboot.

    보고
    NativeDevice.RebootDeviceAction the created RebootDeviceAction .

    doAdbReboot

    protected void doAdbReboot (NativeDevice.RebootMode rebootMode, 
                    String reason)

    Perform a adb reboot.

    매개변수
    rebootMode NativeDevice.RebootMode : a mode of this reboot.

    reason String : for this reboot.

    던지다
    DeviceNotAvailableException

    ensureRuntimePermissionSupported

    protected void ensureRuntimePermissionSupported ()

    helper method to throw exception if runtime permission isn't supported

    던지다
    DeviceNotAvailableException

    getBugreportInternal

    protected InputStreamSource getBugreportInternal ()

    보고
    InputStreamSource

    getBugreportzInternal

    protected File getBugreportzInternal ()

    Internal Helper method to get the bugreportz zip file as a ERROR(/File) .

    보고
    File

    getRunUtil

    protected IRunUtil getRunUtil ()

    Get the RunUtil instance to use.

    보고
    IRunUtil

    internalGetProperty

    protected String internalGetProperty (String propName, 
                    String fastbootVar, 
                    String description)

    Fetch a device property, from the ddmlib cache by default, and falling back to either `adb shell getprop` or `fastboot getvar` depending on whether the device is in Fastboot or not.

    매개변수
    propName String : The name of the device property as returned by `adb shell getprop`

    fastbootVar String : The name of the equivalent fastboot variable to query. if null , fastboot query will not be attempted

    description String : A simple description of the variable. First letter should be capitalized.

    보고
    String A string, possibly null or empty, containing the value of the given property

    던지다
    DeviceNotAvailableException

    isNewer

    protected boolean isNewer (File localFile, 
                    IFileEntry entry)

    Return true if local file is newer than remote file. IFileEntry being accurate to the minute, in case of equal times, the file will be considered newer.

    매개변수
    localFile File

    entry IFileEntry

    보고
    boolean

    performDeviceAction

    protected boolean performDeviceAction (String actionDescription, 
                    com.android.tradefed.device.NativeDevice.DeviceAction action, 
                    int retryAttempts)

    Performs an action on this device. Attempts to recover device and optionally retry command if action fails.

    매개변수
    actionDescription String : a short description of action to be performed. Used for logging purposes only.

    action com.android.tradefed.device.NativeDevice.DeviceAction : the action to be performed

    retryAttempts int : the retry attempts to make for action if it fails but recovery succeeds

    보고
    boolean true if action was performed successfully

    던지다
    DeviceNotAvailableException if recovery attempt fails or max attempts done without success

    postAdbReboot

    protected void postAdbReboot ()

    Possible extra actions that can be taken after a reboot.

    던지다
    DeviceNotAvailableException

    prePostBootSetup

    protected void prePostBootSetup ()

    Allows each device type (AndroidNativeDevice, TestDevice) to override this method for specific post boot setup.

    던지다
    DeviceNotAvailableException

    pullFileInternal

    protected boolean pullFileInternal (String remoteFilePath, 
                    File localFile)

    매개변수
    remoteFilePath String

    localFile File

    보고
    boolean

    던지다
    DeviceNotAvailableException

    setClock

    protected void setClock (Clock clock)

    Set the Clock instance to use.

    매개변수
    clock Clock

    setLogStartDelay

    protected void setLogStartDelay (int delay)

    Sets the time in ms to wait before starting logcat capture for a online device.

    매개변수
    delay int : the delay in ms

    simpleFastbootCommand

    protected CommandResult simpleFastbootCommand (long timeout, 
                     envVarMap, 
                    String[] fullCmd)

    Executes a simple fastboot command with environment variables and report the status of the command.

    매개변수
    timeout long

    envVarMap

    fullCmd String

    보고
    CommandResult

    simpleFastbootCommand

    protected CommandResult simpleFastbootCommand (long timeout, 
                    String[] fullCmd)

    Executes a simple fastboot command and report the status of the command.

    매개변수
    timeout long

    fullCmd String

    보고
    CommandResult

    waitForDeviceNotAvailable

    protected boolean waitForDeviceNotAvailable (String operationDesc, 
                    long time)

    Wait to see the device going unavailable (stop reporting to adb).

    매개변수
    operationDesc String : The name of the operation that is waiting for unavailable.

    time long : The time to wait for unavailable to occur.

    보고
    boolean True if device did become unavailable.