IDisableable

public interface IDisableable

com.android.tradefed.util.IDisableable

Known indirect subclasses

AdbStopServerPreparer, AggregatePostProcessor, AllTestAppsInstallSetup, AoaTargetPreparer, AppSetup, ArtChrootPreparer, AtraceCollector, AtraceRunMetricCollector, AveragePostProcessor, BaseDeviceMetricCollector, BaseEmulatorPreparer, BaseMultiTargetPreparer, BasePostProcessor, BaseTargetPreparer, BluetoothConnectionLatencyCollector, and 130 others.

AdbStopServerPreparer	Target preparer to stop adb server on the host before and after running adb tests.
AggregatePostProcessor	A metric aggregator that gives the min, max, mean, variance, standard deviation, total, count and optionally percentiles for numeric metrics collected during multiple-iteration test runs, treating them as doubles.
AllTestAppsInstallSetup	A `ITargetPreparer` that installs all apps from a `IDeviceBuildInfo#getTestsDir()` folder onto device.
AoaTargetPreparer	`ITargetPreparer` that executes a series of actions (e.g. clicks and swipes) using the Android Open Accessory (AOAv2) protocol.
AppSetup	A `ITargetPreparer` that installs an apk and its tests.
ArtChrootPreparer	Create chroot directory for ART tests.
AtraceCollector	A `IMetricCollector` that runs atrace during a test and collects the result and log them to the invocation.
AtraceRunMetricCollector	Collects the traces from all the test directory under the given directory from the test device, log the test directory and post process the trace files under the test directory and aggregate the metrics.
AveragePostProcessor	Implementation of post processor that calculate the average of the list of metrics.
BaseDeviceMetricCollector	Base implementation of `IMetricCollector` that allows to start and stop collection on `onTestRunStart(com.android.tradefed.device.metric.DeviceMetricData)` and `ERROR(/#onTestRunEnd(com.android.tradefed.device.metric.DeviceMetricData,Map))`.
BaseEmulatorPreparer	Common preparer for launching a local emulator.
BaseMultiTargetPreparer	Base implementation of `IMultiTargetPreparer` that allows to disable the object.
BasePostProcessor	The base `IPostProcessor` that every implementation should extend.
BaseTargetPreparer	Base implementation class for `ITargetPreparer` that allows to control whether the object is disabled or not.
BluetoothConnectionLatencyCollector	The collector will push a pre-defined statsd duration metric config to devices and collect Bluetooth connection duration for each profile.
BluetoothConnectionStateCollector	This collector will collect BluetoothConnectionStateChanged metrics and record connection state number for each profile.
BluetoothConnectionSuccessRatePostProcessor	Implementation of postprocessor which calculates success rate for a bluetooth profile Use "metric-key-match" to specify metrics which contain bluetooth connection states in numeric array Example [0, 1, 2, 3, 0, 1, 2, 3].
BluetoothHciSnoopLogCollector	Collector to enable Bluetooth HCI snoop logging on the DUT and to collect the log for each test.
BugreportzOnFailureCollector	Collect a bugreportz when a test case fails.
BugreportzOnTestCaseFailureCollector	Collect a bugreportz when a test case in a run fails.
BuildInfoRecorder	An `ITargetPreparer` that writes build info meta data into a specified file.
CheckPairingPreparer	A `CompanionAwarePreparer` that verifies BT bonding between primary and companion devices
ClangCodeCoverageCollector	A `BaseDeviceMetricCollector` that will pull Clang coverage measurements off of the device and log them as test artifacts.
CollectingTestListener	A `ITestInvocationListener` that will collect all test results.
CompanionAllocator	Base class that takes care of allocating and freeing companion device `getCompanionDeviceSelectionOptions()` should be implemented to describe the criteria needed to allocate the companion device
CompanionAwarePreparer	An `ITargetPreparer` that encapsulates the logic of getting an already allocated companion device.
CompanionRunCommandTargetPreparer	A `ITargetPreparer` that runs specified commands on the allocated companion device
CompanionTestAppInstallSetup	A `ITargetPreparer` that installs one or more apps from a `IDeviceBuildInfo#getTestsDir()` folder onto an allocated companion device.
CompileBootImageWithSpeedTargetPreparer	Recompiles the boot classpath and system server with the compiler filter 'speed'.
CountTestCasesCollector	Count and report the number of test cases for a given `IRemoteTest`.
CpuThrottlingWaiter	An `ITargetPreparer` that waits until max frequency on all cores are restored to highest level available
CreateAvdPreparer
CreateUserPreparer	Target preparer for creating user and cleaning it up at the end.
DebugHostLogOnFailureCollector	Collector that will gather and log the host-side logs when a test case failure occurs.
DeviceBuildInfoBootStrapper	A `ITargetPreparer` that replaces build info fields with attributes read from device This is useful for testing devices with builds generated from an external source (e.g.
DeviceBuildInfoInjector	A `ITargetPreparer` that inserts `DeviceBuildDescriptor` metadata into the `IBuildInfo`.
DeviceCleaner	Performs reboot or format as cleanup action after test, and optionally turns screen off
DeviceFlashPreparer	A `ITargetPreparer` that flashes an image on physical Android hardware.
DeviceImageZipFlashingTargetPreparer	A target preparer that flashes the device with device images provided via a specific format.
DeviceOwnerTargetPreparer	An `ITargetPreparer` that sets up a device owner component.
DeviceSetup	A `ITargetPreparer` that configures a device for testing based on provided `Option`s.
DeviceStorageFiller	Target preparer to fill up storage so some amount of free space is available.
DeviceStringPusher	Target preparer to write a string to a file.
DeviceTraceCollector	Collector that will start perfetto trace when a test run starts and log trace file at the end.
DeviceUpdateTargetPreparer	An abstract `ITargetPreparer` that takes care of common steps around updating devices with a device image file from an external source (as opposed to a build service).
DeviceWiper	A `ITargetPreparer` that wipes userdata
DisableSELinuxTargetPreparer	Target preparer that disables SELinux if enabled.
DynamicSystemPreparer	An `ITargetPreparer` that sets up a system image on top of a device build with the Dynamic System Update.
EraseUserDataPreparer	A `ITargetPreparer` that wipes user data on the device.
FastbootCommandPreparer	Target preparer that triggers fastboot and sends fastboot commands.
FastbootUpdateBootstrapPreparer	An `ITargetPreparer` that stages specified files (bootloader, radio, device image zip) into `IDeviceBuildInfo` to get devices flashed with `FastbootDeviceFlasher`, then injects post-boot device attributes into the build info for result reporting purposes.
FeatureFlagTargetPreparer	Updates the DeviceConfig (feature flags tuned by a remote service).
FilePullerDeviceMetricCollector	A `BaseDeviceMetricCollector` that listen for metrics key coming from the device and pull them as a file from the device.
FilePullerLogCollector	Logger of the file reported by the device-side.
FoldableModePreparer	A target preparer that can switch the foldable state of a device.
FolderSaver	A `ITargetPreparer` that pulls directories off device, compresses and saves it into logging backend.
FormattedGeneratorReporter	Reporter that allows to generate reports in a particular format.
GcovCodeCoverageCollector	A `BaseDeviceMetricCollector` that will pull gcov coverage measurements off of the device and log them as test artifacts.
GcovKernelCodeCoverageCollector	A `BaseDeviceMetricCollector` that will pull gcov kernel coverage measurements out of debugfs and off of the device and then finally logs them as test artifacts.
GkiDeviceFlashPreparer	A target preparer that flash the device with android common kernel generic image.
GsiDeviceFlashPreparer	A target preparer that flashes the device with android generic system image.
HelloWorldMultiTargetPreparer	An example implementation of a `IMultiTargetPreparer`.
HostStatsdMetricCollector	A `IMetricCollector` that collects statsd metrics from host side using statsd utility commands.
ILabPreparer	Marker interface for lab preparers See `ITargetPreparer` for a description of what these interfaces are intended.
IMetricCollector	This interface will be added as a decorator when reporting tests results in order to collect matching metrics.
IMultiTargetPreparer	Prepares the test environment for several devices together.
IPostProcessor	Post processors is a Trade Federation object meant to allow the processing of metrics and logs AFTER the tests and BEFORE result reporting.
ITargetCleaner	This interface is deprecated. tearDown has been moved to the base ITargetPreparer interface.
ITargetPreparer	Prepares the test environment for the test run.
InstallAllTestZipAppsSetup	A `ITargetPreparer` that installs all apps in a test zip.
InstallApexModuleTargetPreparer
InstallApkSetup	A `ITargetPreparer` that installs one or more apks located on the filesystem.
InstallBuildEnvApkSetup	A `ITargetPreparer` that installs one or more test apks from an Android platform build env.
InstrumentationPreparer	A `ITargetPreparer` that runs instrumentation
JavaCodeCoverageCollector	A `BaseDeviceMetricCollector` that will pull Java coverage measurements off of the device and log them as test artifacts.
JsonHttpTestResultReporter	A result reporter that encode test metrics results and branch, device info into JSON and POST into an HTTP service endpoint
KillExistingEmulatorPreparer	A `ITargetPreparer` that shuts down a running emulator.
KnownFailurePreparer	Target preparer to skip retrying known failure.
LocalEmulatorLaunch	A TargetPreparer that launches an emulator locally from an android build environment.
LocalEmulatorSnapshot	A TargetPreparer intended for generating a clean emulator snapshot from a android build/development environment
LogcatOnFailureCollector	Collector that will capture and log a logcat when a test case fails.
LogcatTimingMetricCollector	A metric collector that collects timing information (e.g. user switch time) from logcat during one or multiple repeated tests by using given regex patterns to parse start and end signals of an event from logcat lines.
MergeMultiBuildTargetPreparer	A `IMultiTargetPreparer` that allows to pass information from one build to another by naming them and the file key to copy to the other build.
MetricFilePostProcessor	Used for uploading the metrics log file collected during the test and run level.
MetricsXMLResultReporter	MetricsXMLResultReporter writes test metrics and run metrics to an XML file in a folder specified by metrics-folder parameter at the invocationEnded phase of the test.
MixImageZipPreparer	An `IMultiTargetPreparer` that mixes a system build's images in a device build.
MixKernelTargetPreparer	A `ITargetPreparer` that allows to mix a kernel image with the device image.
ModuleListener	Listener attached to each `IRemoteTest` of each module in order to collect the list of results.
ModuleLogcatCollector	Version of logcat collector but for module.
ModuleOemTargetPreparer
NativeLeakCollector	A `ITargetPreparer` that runs 'dumpsys meminfo --unreachable -a' to identify the unreachable native memory currently held by each process.
NoApkTestSkipper	Special preparer that allows to skip an invocation completely (preparation and tests) if there are no apks to tests.
PairingMultiTargetPreparer	A multi-target preparer helps make Bluetooth pairing (and connection) between two devices.
PerfettoGenericPostProcessor	A post processor that processes text/binary metric perfetto proto file into key-value pairs by recursively expanding the proto messages and fields with string values until the field with numeric value is encountered.
PerfettoPreparer	Perfetto preparer pushes the config file in to the device at a standard location to which perfetto have access to.
PerfettoPullerMetricCollector	Base implementation of `FilePullerDeviceMetricCollector` that allows pulling the perfetto files from the device and collect the metrics from it.
ProfileTargetPreparer	Base class for setting up target preparer for any profile user `android.os.usertype.profile.XXX`.
PushFileInvoker	This class is deprecated. Use `PushFilePreparer` instead
PushFilePreparer	A `ITargetPreparer` that attempts to push any number of files from any host path to any device path.
PythonVirtualenvPreparer	Sets up a Python virtualenv on the host and installs packages.
RebootReasonCollector	Collector that collects device reboot during the test run and report them by reason and counts.
RebootTargetPreparer	Target preparer that reboots the device.
RecoveryLogPreparer	A target preparer used to collect logs before recovery.
RemoveSystemAppPreparer	A `ITargetPreparer` for removing an apk from the system partition before a test run.
ReportPassedTests	Report in a file possible filters to exclude passed test.
RestartSystemServerTargetPreparer	Target preparer that restarts the system server without rebooting the device.
ResultAggregator	Special forwarder that aggregates the results when needed, based on the retry strategy that was taken.
RootTargetPreparer	Target preparer that performs "adb root" or "adb unroot" based on option "force-root".
RootcanalForwarderPreparer
RunCommandTargetPreparer
RunHostCommandTargetPreparer	Target preparer to run arbitrary host commands before and after running the test.
RunHostScriptTargetPreparer	Target preparer which executes a script before running a test.
RunOnCloneProfileTargetPreparer
RunOnSdkSandboxTargetPreparer	An `ITargetPreparer` to marks that tests should run in the sdk sandbox.
RunOnSecondaryUserTargetPreparer	An `ITargetPreparer` that creates a secondary user in setup, and marks that tests should be run in that user.
RunOnSystemUserTargetPreparer	An `ITargetPreparer` that marks that tests should be run on the user (rather than the current user).
RunOnWorkProfileTargetPreparer	An `ITargetPreparer` that creates a work profile in setup, and marks that tests should be run in that user.
RuntimeRestartCollector	Collector that collects timestamps of runtime restarts (system server crashes) during the test run, if any.
ScreenshotOnFailureCollector	Collector that will capture and log a screenshot when a test case fails.
SemaphoreTokenTargetPreparer	This is a preparer used to use token to serialize test excution in tradefed host.
ShardListener	A `ITestInvocationListener` that collects results from a invocation shard (aka an invocation split to run on multiple resources in parallel), and forwards them to another listener.
ShowmapPullerMetricCollector	Base implementation of `FilePullerDeviceMetricCollector` that allows pulling the showmap files from the device and collect the metrics from it.
SideloadOtaTargetPreparer	A target preparer that performs sideload of a specified OTA package, applies the package, waits for device to boot up, and injects the device build properties to use as build info This target preparer assumes that the device will be in regular adb mode when started, and will ensure that the device exits in the same mode but with the newer build applied.
StatsdBeforeAfterGaugeMetricPostProcessor	A post processor that processes gauge metrics collected in a "before/after" approach, i.e.
StatsdEventMetricPostProcessor	A post processor that processes event metrics in statsd reports into key-value pairs, using the formatters specified on the processor.
StatsdGenericPostProcessor	A post processor that processes binary proto statsd reports into key-value pairs by expanding the report as a tree structure.
StopServicesSetup	A `ITargetPreparer` that stops services on the device.
StubMultiTargetPreparer	Placeholder empty implementation of a `IMultiTargetPreparer`.
StubTargetPreparer	Placeholder empty implementation of a `ITargetPreparer`.
SuiteApkInstaller	Installs specified APKs for Suite configuration: either from $ANDROID_TARGET_OUT_TESTCASES variable or the ROOT_DIR in build info.
SuiteResultReporter	Collect test results for an entire suite invocation and output the final results.
SwitchUserTargetPreparer	A `ITargetPreparer` that switches to the specified user kind in setUp.
TearDownPassThroughPreparer	Allows for running tearDown on preparers that are included in a config as an object.
TemperatureThrottlingWaiter	An `ITargetPreparer` that waits until device's temperature gets down to target
TestAppInstallSetup	A `ITargetPreparer` that installs one or more apps from a `IDeviceBuildInfo.getTestsDir()` folder onto device.
TestFilePushSetup	A `ITargetPreparer` that pushes one or more files/dirs from a `IDeviceBuildInfo.getTestsDir()` folder onto device.
TestSystemAppInstallSetup	A `ITargetPreparer` that installs one or more apps from a `IDeviceBuildInfo.getTestsDir()` folder onto the /system partition on device.
TimeWaster	A simple target preparer to waste time and potentially restart the device.
TraceCmdCollector	A `IMetricCollector` that collects traces during the test using trace-cmd, and logs them to the invocation.
UserCleaner	A `ITargetPreparer` that removes secondary users on teardown.
VisibleBackgroundUserPreparer	Target preparer for running tests in a user that is started in the visible in the background.
WaitForDeviceDatetimePreparer	A `ITargetPreparer` that waits for datetime to be set on device Optionally this preparer can force a `TargetSetupError` if datetime is not set within timeout, or force host datetime onto device,
WifiPreparer	A `ITargetPreparer` that configures wifi on the device if necessary.
XmlFormattedGeneratorReporter	Implementation of the `FormattedGeneratorReporter` which format the suite results in an xml format.
XmlResultReporter	Writes JUnit results to an XML files in a format consistent with Ant's XMLJUnitResultFormatter.

Interface that describes a Tradefed object that can be disabled. A disabled object will be skipped and not called at all.

Summary

Public methods
`default boolean`	`isDisabled()` Returns True if entire object disabled (skip both setup and teardown).
`default boolean`	`isTearDownDisabled()` Returns True if just teardown should be skipped.
`default void`	`setDisable(boolean isDisabled)` Sets whether the object should be disabled.
`default void`	`setDisableTearDown(boolean isDisabled)` Sets whether the teardown step in the object should be skipped.

Public methods

isDisabled

public boolean isDisabled ()

Returns True if entire object disabled (skip both setup and teardown). False otherwise.

Returns
`boolean`

isTearDownDisabled

public boolean isTearDownDisabled ()

Returns True if just teardown should be skipped. False otherwise.

Returns
`boolean`

setDisable

public void setDisable (boolean isDisabled)

Sets whether the object should be disabled. Disabled means that both setup and teardown steps should be skipped. Can be use to make an object disabled by default in the default constructor.

Parameters
`isDisabled`	`boolean`: the state the object should be put in.

setDisableTearDown

public void setDisableTearDown (boolean isDisabled)

Sets whether the teardown step in the object should be skipped. Setup step is still done.

Parameters
`isDisabled`	`boolean`: the state the object should be put in.