מ-Android 12, אנדרואיד יכולה להשתמש באופן אופציונלי במערכת ניווט לוויין (GNSS) כדי להציע זמני יוניקס לשירות time_detector . זה לא מופעל כברירת מחדל ב-AOSP.
כאשר זיהוי זמן GNSS מופעל, gnss_time_update_service
מקשיב באופן פסיבי לעדכוני מיקום ממקורות GNSS ומגיש הצעות GNSS לשירות time_detector
. שירות time_detector
קובע אם לעדכן את שעון המערכת כך שיתאים להצעה.
השפעה על צריכת החשמל
שירות AOSP gnss_time_update_service
מאזין באופן פסיבי לעדכוני מיקום. המשמעות היא שהוא אף פעם לא מפעיל את ה-GPS או צורך כוח נוסף. זה גם אומר שאם לא אפליקציה או שירות אחר במערכת מבקשים באופן פעיל עדכוני מיקום, gnss_time_update_service
לא יקבל עדכון מיקום ויציע שעת GNSS.
יישום
כדי לאפשר זיהוי זמן GNSS, יצרני המכשיר חייבים להפעיל במפורש את gnss_time_update_service
בשרת המערכת.
יש לעדכן גם את הערכים config_enableGnssTimeUpdateService
וגם את הערכים config_autoTimeSourcesPriority
בקובץ core/res/res/values/config.xml
כדי להפעיל תכונה זו. הגדר את הערך עבור config_enableGnssTimeUpdateService
ל- true
והוסף gnss
לרשימת הפריטים עבור config_autoTimeSourcesPriority
. מיקומו של gnss
ברשימת העדיפות קובע את העדיפות הניתנת להצעות GNSS ביחס להצעות ממקורות אחרים.
להלן דוגמה לקובץ core/res/res/values/config.xml
שבו זיהוי זמן GNSS מופעל ו- gnss
במקום השלישי ברשימת העדיפות אחרי network
telephony
.
<!-- Specifies priority of automatic time sources. Suggestions from higher entries in the list
take precedence over lower ones.
See com.android.server.timedetector.TimeDetectorStrategy for available sources. -->
<string-array name="config_autoTimeSourcesPriority">
<item>network</item>
<item>telephony</item>
<item>gnss</item>
</string-array>
<!-- Enables the GnssTimeUpdate service. This is the global switch for enabling Gnss time based
suggestions to TimeDetector service. See also config_autoTimeSourcesPriority. -->
<bool name="config_enableGnssTimeUpdateService">true</bool>
איתור באגים ובדיקה
כדי לבדוק את זיהוי זמן GNSS, אתה יכול להשתמש בפקודות adb shell cmd location
. השתמש בפקודות אלה כדי להוסיף ספקי מיקום לבדיקה שבהם תוכל לציין מיקום ואת זמן ה-GNSS המשויך. gnss_time_update_service
מקשיב לעדכוני מיקום אלה, ומציע הצעות מעת לעת.
להלן דוגמאות של פקודות adb shell cmd location
:
# Enable Master Location Switch in the foreground user (usually user 10 on automotive). If you just flashed, this can be done through setup wizard.adb shell cmd location set-location-enabled true --user 10
# Add GPS test provider (This usually fails the first time. Will throw a SecurityException with "android from <SOME_UID> not allowed to perform MOCK_LOCATION".)adb shell cmd location providers add-test-provider gps
# Enable mock location permissions for previous UIDadb shell appops set UID_PRINTED_IN_PREVIOUS_ERROR android:mock_location allow
# Add GPS test provider (Should work with no errors.)adb shell cmd location providers add-test-provider gps
# Enable GPS test provideradb shell cmd location providers set-test-provider-enabled gps true
# Set location with time (Time can't be lower than the limit set by the lower bound.)adb shell cmd location providers set-test-provider-location gps --location LATITUDE,LONGITUDE --time TIME