Camera Extensions

Device manufacturers can expose extensions such as bokeh, night mode, and HDR to third-party developers through the Camera Extensions interface provided by the OEM vendor library. Developers can use the Camera2 Extensions API and the CameraX Extensions API to access the extensions implemented in the OEM vendor library.

For a list of supported extensions, which is the same across Camera2 and CameraX, see CameraX Extensions API. If you want to add an extension, file a bug with the Issue Tracker.

This page describes how to implement and enable the OEM vendor library on devices.

Architecture

The following diagram describes the architecture of the Camera Extensions interface or extensions-interface: Architecture

Figure 1. Camera Extensions architecture diagram

As shown in the diagram, to support Camera Extensions, you need to implement the extensions-interface provided by the OEM vendor library. Your OEM vendor library enables two APIs: CameraX Extensions API and Camera2 Extensions API, which are used by CameraX and Camera2 apps, respectively, to access vendor extensions.

Implement the OEM vendor library

To implement the OEM vendor library, copy the camera-extensions-stub files into a system library project. These files define the Camera Extensions interface.

The camera-extensions-stub files are divided into the following categories:

Essential interface files (don't modify)

  • PreviewExtenderImpl.java
  • ImageCaptureExtenderImpl.java
  • ExtenderStateListener.java
  • ProcessorImpl.java
  • PreviewImageProcessorImpl.java
  • CaptureProcessorImpl.java
  • CaptureStageImpl.java
  • RequestUpdateProcessorImpl.java
  • ProcessResultImpl.java
  • advanced/AdvancedExtenderImpl.java
  • advanced/Camera2OutputConfigImpl.java
  • advanced/Camera2SessionConfigImpl.java
  • advanced/ImageProcessorImpl.java
  • advanced/ImageReaderOutputConfigImpl.java
  • advanced/ImageReferenceImpl.java
  • advanced/MultiResolutionImageReaderOutputConfigImpl.java
  • advanced/OutputSurfaceImpl.java
  • advanced/RequestProcessorImpl.java
  • advanced/SessionProcessorImpl.java
  • advanced/SurfaceOutputConfigImpl.java

Mandatory implementations (add your implementation)

  • ExtensionVersionImpl.java
  • InitializerImpl.java

Bokeh extender classes (implement it if Bokeh extension is supported)

  • BokehImageCaptureExtenderImpl.java
  • BokehPreviewExtenderImpl.java
  • advanced/BokehAdvancedExtenderImpl.java

Night extender classes (implement it if Night extension is supported)

  • NightImageCaptureExtenderImpl.java
  • NightPreviewExtenderImpl.java
  • advanced/NightAdvancedExtenderImpl.java

Auto extender classes (implement it if Auto extension is supported)

  • AutoImageCaptureExtenderImpl.java
  • AutoPreviewExtenderImpl.java
  • advanced/AutoAdvancedExtenderImpl.java

HDR extender classes (implement it if HDR extension is supported)

  • HdrImageCaptureExtenderImpl.java
  • HdrPreviewExtenderImpl.java
  • advanced/HdrAdvancedExtenderImpl.java

Face Retouch extender classes (implement it if Face Retouch extension is supported)

  • BeautyImageCaptureExtenderImpl.java
  • BeautyPreviewExtenderImpl.java
  • advanced/BeautyAdvancedExtenderImpl.java

Utilities (optional, can be deleted)

  • advanced/Camera2OutputConfigImplBuilder.java
  • advanced/Camera2SessionConfigImplBuilder.java

You aren't required to provide an implementation for every extension. If you don't implement an extension, set isExtensionAvailable() to return false or remove the corresponding Extender classes. The Camera2 and CameraX Extensions APIs report to the app that the extension is unavailable.

Let’s walk through how the Camera2 and CameraX Extensions APIs interact with the vendor library to enable an extension. The following diagram illustrates the end-to-end flow using the Night extension as an example:

Mainflow

Figure 2. Night extension implementation

  1. Version verification:

    Camera2/X calls ExtensionVersionImpl.checkApiVersion() to ensure that the OEM-implemented extensions-interface version is compatible with Camera2/X supported versions.

  2. Vendor library initialization:

    InitializerImpl has a method init() that initializes the vendor library. Camera2/X completes the initialization before accessing the Extender classes.

  3. Instantiate Extender classes:

    Instantiates the Extender classes for the extension. There are two Extender types: Basic Extender and Advanced Extender. You must implement one Extender type for all Extensions. For more information, see Basic Extender versus Advanced Extender.

    Camera2/X instantiates and interacts with the Extender classes to retrieve information and enable the extension. For a given extension, Camera2/X can instantiate the Extender classes multiple times. As a result, don't do heavy-lifting initialization in the constructor or the init() call. Do the heavy lifting only when the camera session is about to start, such as when onInit() is called in Basic Extender or initSession() is called in Advanced Extender.

    For the Night extension, the following Extender classes are instantiated for the Basic Extender type:

    • NightImageCaptureExtenderImpl.java
    • NightPreviewExtenderImpl.java

    And for the Advanced Extender type:

    • NightAdvancedExtenderImpl.java
  4. Check extension availability:

    Before enabling the extension, isExtensionAvailable() checks if the extension is available on the specified camera ID through the Extender instance.

  5. Initialize the Extender with camera information:

    Camera2/X calls init() on the Extender instance and passes it the camera ID and CameraCharacteristics.

  6. Query information:

    Invokes the Extender class to retrieve information such as supported resolutions, still capture estimated latency, and capture request keys from the Extender in preparation for enabling the extension.

  7. Enable extension on the Extender:

    The Extender class provides all the interfaces needed to enable the class. It offers a mechanism to hook OEM implementation into the Camera2 pipeline such as injecting capture request parameters or enabling a post processor.

    For the Advanced Extender type, Camera2/X interacts with SessionProcessorImpl to enable the extension. Camera2/X retrieves the SessionProcessorImpl instance by calling createSessionProcessor() on the Extender.

The following sections describe the extension flow in greater detail.

Version verification

When loading the OEM vendor library from the device at runtime, Camera2/X verifies if the library is compatible with the extensions-interface version. The extensions-interface uses semantic versioning, or MAJOR.MINOR.PATCH, for example, 1.1.0 or 1.2.0. However, only the major and minor versions are used during the version verification.

To verify the version, Camera2/X calls ExtensionVersionImpl.checkApiVersion() with the supported extensions-interface version. Camera2/X then uses the version reported by the OEM library to determine if the extension can be enabled and what capabilities it should invoke.

Major version compatibility

If the major versions of the extension-interface are different between Camera2/X and the vendor library, then it's considered incompatible and the extension is disabled.

Backward compatibility

As long as the major version is identical, Camera2/X ensures backward compatibility with OEM vendor libraries built with prior extensions-interface versions. For example, if Camera2/X supports extensions-interface 1.3.0, the OEM vendor libraries that implemented 1.0.0, 1.1.0, and 1.2.0 are still compatible. This also means that after you implement a specific version of the vendor library, Camera2/X makes sure the library is backward compatible with upcoming extension-interface versions.

Forward compatibility

Forward compatibility with vendor libraries of newer extensions-interface depends on you, the OEM. If you need some features to implement the extensions, you might want to enable the extensions starting from a certain version. In this case, you can return the supported extensions-interface version when the Camera2/X library version meets the requirements. If the Camera2/X versions aren't supported, you can return an incompatible version such as 99.0.0 to disable the extensions.

Vendor library initialization

After verifying the extensions-interface version implemented by the OEM library, Camera2/X starts the initialization process. The InitializerImpl.init() method signals to the OEM library that an app is trying to use extensions.

Camera2/X makes no other calls to the OEM library (aside from version checking) until the OEM vendor library calls OnExtensionsInitializedCallback.onSuccess() to notify the completion of initialization.

You must implement InitializerImpl as of extensions-interface 1.1.0. Camera2/X skips the library initialization step if the OEM vendor library implements extensions-interface 1.0.0.

Basic Extender versus Advanced Extender

There are two types of extensions-interface implementation: Basic Extender and Advanced Extender. Advanced Extender has been supported since extensions-interface 1.2.0.

Implement Basic Extender for extensions that process images in the camera HAL or use a post processor capable of processing YUV streams.

Implement Advanced Extender for extensions that need to customize the Camera2 stream configuration and send capture requests as needed.

See the following table for the comparison:

Basic Extender Advanced Extender
Stream configurations Fixed
Preview: PRIVATE or YUV_420_888 (if processor exists)
Still capture: JPEG or YUV_420_888 (if processor exists)
Customizable by OEM.
Sending capture request Only Camera2/X can send capture requests. You can set the parameters to these requests. When the processor is provided for image capture, Camera2/X can send multiple capture requests and send all the images and capture results to the processor. A RequestProcessorImpl instance is provided to you to execute the camera2 capture request and get results and Image.

Camera2/X invokes startRepeating and startCapture on SessionProcessorImpl to signal the OEM to start the repeating request for preview and start the still capture sequence respectively.

Hooks in the camera pipeline
  • onPresetSession provides session parameters.
  • onEnableSession sends a single request right after CameraCaptureSession is configured.
  • onDisableSession sends a single request before CameraCaptureSession is closed.
  • initSession initializes and returns a customized camera2 session configuration for creating the capture session.
  • onCaptureSessionStart is invoked right after CameraCaptureSession is configured.
  • onCaptureSessionEnd is invoked before CameraCaptureSession is closed.
Suitable for Extensions implemented in the camera HAL or in a processor that processes YUV images.
  • Has Camera2-based implementations for the extensions.
  • Needs customized stream configuration such as RAW stream.
  • Needs Interactive capture sequence.
Supported API version Camera2 Extensions: Android 13 or higher
CameraX Extensions: camera-extensions 1.1.0 or higher
Camera2 Extensions: Android 12L or higher
CameraX Extensions: camera-extensions 1.2.0-alpha03 or higher

App flows

The following table shows three types of app flows and their corresponding Camera Extensions API calls. While Camera2/X provide these APIs, you must properly implement the vendor library to support these flows, which we describe in more detail in a later section.

Camera2 extensions CameraX extensions
Query extension availability CameraExtensionCharacteristics .getSupportedExtensions ExtensionsManager. isExtensionAvailable
Query information CameraExtensionCharacteristics. getExtensionSupportedSizes CameraExtensionCharacteristics. getEstimatedCaptureLatencyRangeMillis CameraExtensionCharacteristics. getAvailableCaptureRequestKeys CameraExtensionCharacteristics. getAvailableCaptureResultKeys ExtensionsManager. getEstimatedCaptureLatencyRange

CameraX handles the rest of the information within the library.

Preview and still-capture with extension enabled CameraDevice. createExtensionSession

cameraExtensionsSession. setRepeatingRequest

cameraExtensionsSession. capture

val cameraSelector = ExtensionsManager. getExtensionEnabledCameraSelector

bindToLifecycle(lifecycleOwner, cameraSelector, preview, ...)

Basic Extender

The Basic Extender interface provides hooks into several places in the camera pipeline. Each extension type has corresponding Extender classes that OEMs need to implement.

The following table lists the Extender classes OEMS need to implement for each extension:

Extender classes to implement
Night NightPreviewExtenderImpl.java

NightImageCaptureExtenderImpl.java

HDR HdrPreviewExtenderImpl.java

HdrImageCaptureExtenderImpl.java

Auto AutoPreviewExtenderImpl.java

AutoImageCaptureExtenderImpl.java

Bokeh BokehPreviewExtenderImpl.java

BokehImageCaptureExtenderImpl.java

Face retouch BeautyPreviewExtenderImpl.java

BeautyImageCaptureExtenderImpl.java

We use PreviewExtenderImpl and ImageCaptureExtenderImpl as placeholders in the following example. Replace these with the names of the actual files you're implementing.

Basic Extender has the following capabilities:

  • Inject session parameters when configuring CameraCaptureSession ( onPresetSession).
  • Notify you of the capture session start and closing events and send a single request to notify the HAL with the returned parameters (onEnableSession, onDisableSession).
  • Inject capture parameters for the request (PreviewExtenderImpl.getCaptureStage, ImageCaptureExtenderImpl.getCaptureStages).
  • Add processors for preview and still capture that's capable of processing YUV_420_888 stream.

Let’s see how Camera2/X invokes the extensions-interface to achieve the three app flows mentioned above.

App flow 1: Check extension availability

BasicExtenderAppFlow1

Figure 3. App flow 1 on Basic Extender

In this flow, Camera2/X directly calls the isExtensionAvailable() method of both PreviewExtenderImpl and ImageCaptureExtenderImpl without calling init(). Both Extender classes must return true to enable the extensions.

This is often the first step for apps to check if the given extension type is supported for a given camera ID before enabling the extension. This is because some extensions are supported only on certain camera IDs.

App flow 2: Query information

BasicExtenderAppFlow2

Figure 4. App flow 2 on Basic Extender

After determining if the extension is available, apps should query the following information before enabling the extension.

  • Still capture latency range: ImageCaptureExtenderImpl.getEstimatedCaptureLatencyRange returns the range of the capture latency for the app to evaluate if it's appropriate to enable the extension for the current scenario.

  • Supported sizes for the preview and capture surface: ImageCaptureExtenderImpl.getSupportedResolutions and PreviewExtenderImpl.getSupportedResolutions return a list of image formats and the sizes that are supported for surface format and size.

  • Supported request and result keys: Camera2/X invokes the following methods to retrieve the supported capture request keys and result keys from your implementation:

    • ImageCaptureExtenderImpl.getAvailableCaptureRequestKeys
    • ImageCaptureExtenderImpl.getAvailableCapturetResultKeys

Camera2/X always calls init() first on these Extender classes before querying for more information.

App flow 3: Preview/still capture with extension enabled (HAL implementation)

BasicExtenderAppFlow3

Figure 5. App flow 3 on Basic Extender

The above diagram illustrates the main flow of enabling preview and still capture with an extension without any processor. This means the camera HAL processes the extension.

In this flow, Camera2/X first calls init() then onInit, which notifies you that a camera session is about to start with the specified extensions. You can do heavy-lifting initialization in onInit().

When configuring CameraCaptureSession, Camera2/X invokes onPresetSession to get the session parameters. After the capture session is configured successfully, Camera2/X invokes onEnableSession returning a CaptureStageImpl instance that contains the capture parameters. Camera2/X immediately sends a single request with these capture parameters to notify the HAL. Similarly, before the capture session is closed, Camera2/X invokes onDisableSession and then sends a single request with the returned capture parameters.

The repeating request triggered by Camera2/X contains the request parameters returned by PreviewExtenderImpl.getCaptureStage(). Furthermore, the still capture request contains the parameters returned by ImageCaptureExtenderImpl.getCaptureStages().

Finally, Camera2/X invokes onDeInit() after the camera session has finished. You can release resources in onDeinit().

Preview processor

In addition to the camera HAL, you can also implement extensions in a processor.

Implement PreviewExtenderImpl.getProcessorType to specify the processor type as explained below:

  • PROCESSOR_TYPE_NONE: No processor. Images are processed in the camera HAL.

  • PROCESSOR_TYPE_REQUEST_UPDATE_ONLY: The processor type lets you update the repeating request with new capture request parameters based on the latest TotalCaptureResult.

    PreviewExtenderImpl.getProcessor must return a RequestUpdateProcessorImpl instance that processes the TotalCaptureResult instance and returns a CaptureStageImpl instance to update the repeating request. PreviewExtenderImpl.getCaptureStage() should also reflect the result of the processing and return the latest CaptureStageImpl.

  • PROCESSOR_TYPE_IMAGE_PROCESSOR: This type allows you to implement a processor to process YUV_420_888 images and write the output to a PRIVATE surface.

    You need to implement and return a PreviewImageProcessorImpl instance in PreviewExtenderImpl.getProcessor. The processor is responsible for processing YUV_420_888 input images. It should write the output to the PRIVATE format of preview. Camera2/X uses a YUV_420_888 surface instead of PRIVATE to configure the CameraCaptureSession for preview.

    See following illustration for the flow:

PreviewProcessor

Figure 6. Preview flow with PreviewImageProcessorImpl

The PreviewImageProcessorImpl interface extends ProcessImpl and has three important methods:

  • onOutputSurface(Surface surface, int imageFormat) sets the output surface for the processor. For PreviewImageProcessorImpl, imageFormat is a pixel format such as PixelFormat.RGBA_8888.

  • onResolutionUpdate(Size size) sets the size of the input image.

  • onImageFormatUpdate(int imageFormat) sets the image format of the input image. Currently, it can only be YUV_420_888.

Image capture processor

For still capture, you can implement a processor by returning a CaptureProcessorImpl instance using ImageCaptureExtenderImpl.getCaptureProcessor. The processor is responsible to process a list of captured YUV_420_888 images and TotalCaptureResult instances and write the output to a YUV_420_888 surface.

You can safely assume that preview is enabled and running before sending the still capture request.

See the flow in the diagram below:

CaptureProcessor

Figure 7. Still capture flow with CaptureProcessorImpl

  1. Camera2/X uses a YUV_420_888 format surface for still capture to configure the capture session. Camera2/X prepares CaptureProcessorImpl by calling:

    • CaptureProcessorImpl.onImageFormatUpdate() with YUV_420_888.
    • CaptureProcessorImpl.onResolutionUpdate() with the input image size.
    • CaptureProcessorImpl.onOutputSurface() with an output YUV_420_888 surface.
  2. ImageCaptureExtenderImpl.getCaptureStages returns a list of CaptureStageImpl , where each element maps to a CaptureRequest instance with capture parameters that are sent by Camera2/X. For example, if it returns a list of three CaptureStageImpl instances, Camera2/X sends three capture requests with corresponding capture parameters using the captureBurst API.

  3. The received images and TotalCaptureResult instances are bundled together and sent to CaptureProcessorImpl for processing.

  4. CaptureProcessorImpl writes the result Image (YUV_420_888 format) to the output surface specified by the onOutputSurface() call. Camera2/X converts it into JPEG images if necessary.

Support capture request keys and results

In addition to camera preview and capture, apps can set zoom, flash parameters, or trigger a tap-to-focus. These parameters might not be compatible with your extension implementation.

The following methods have been added to extensions-interface 1.3.0 to allow you to expose the parameters that your implementation supports:

  • ImageCaptureExtenderImpl.getAvailableCaptureRequestKeys() returns the capture request keys supported by your implementation.
  • ImageCaptureExtenderImpl.getAvailableCaptureResultKeys() returns the capture result keys that are contained in the capture result.

If the camera HAL processes the extension, Camera2/X retrieves the capture results in CameraCaptureSession.CaptureCallback. However, if the processor is implemented, then Camera2/X retrieves the capture results in ProcessResultImpl , which is passed to the process() method in PreviewImageProcessorImpl and CaptureProcessorImpl. You're responsible for reporting the capture result through ProcessResultImpl to Camera2/X.

See the definition of the CaptureProcessorImpl interface below as an example. In extensions-interface 1.3.0 or higher, the second process() call is invoked:

Interface CaptureProcessorImpl extends ProcessorImpl {
    // invoked when extensions-interface version < 1.3.0
    void process(Map<Integer, Pair<Image, TotalCaptureResult>> results);
    // invoked when extensions-interface version >= 1.3.0
    void process(Map<Integer, Pair<Image, TotalCaptureResult>> results,
            ProcessResultImpl resultCallback, Executor executor);
}

For common camera operations like zoom, tap-to-focus, flash, and exposure compensation, we recommend supporting the following keys for both capture request and capture result:

  • Zoom:
    • CaptureRequest#CONTROL_ZOOM_RATIO
    • CaptureRequest#SCALER_CROP_REGION
  • Tap-to-focus:
    • CaptureRequest#CONTROL_AF_MODE
    • CaptureRequest#CONTROL_AF_TRIGGER
    • CaptureRequest#CONTROL_AF_REGIONS
    • CaptureRequest#CONTROL_AE_REGIONS
    • CaptureRequest#CONTROL_AWB_REGIONS
  • Flash:
    • CaptureRequest#CONTROL_AE_MODE
    • CaptureRequest#CONTROL_AE_PRECAPTURE_TRIGGER
    • CaptureRequest#FLASH_MODE
  • Exposure compensation:
    • CaptureRequest#CONTROL_AE_EXPOSURE_COMPENSATION

For Basic Extenders that implement 1.2.0 or prior versions, the CameraX Extensions API explicitly supports all the above keys. For extensions-interface 1.3.0, both CameraX and Camera2 honor the returned list and support only the keys contained in it. For example, if you decide to return only CaptureRequest#CONTROL_ZOOM_RATIO and CaptureRequest#SCALER_CROP_REGION in the 1.3.0 implementation, then that means only zoom is supported for the app while tap-to-focus, flash, and exposure compensation aren't allowed.

Advanced Extender

Advanced Extender is a type of vendor implementation based on the Camera2 API. This Extender type was added in extensions-interface 1.2.0. Depending on the device manufacturer, extensions might be implemented in the app layer, which depends on the following factors:

  • Custom stream configuration: Configure custom streams like RAW stream or have multiple streams for different physical camera IDs.

  • Capability to send Camera2 requests: Support a complicated interaction logic that can send capture requests with parameters based on the results of previous requests.

Advanced Extender provides a wrapper, or an intermediate layer, so you can customize the stream configuration and send capture requests on demand.

Files to implement

To switch to the Advanced Extender implementation, the isAdvancedExtenderImplemented() method in ExtensionVersionImpl must return true. For each extension type, OEMs must implement the corresponding Extender classes. The Advanced Extender implementation files are in the advanced package.

Extender classes to implement
Night advanced/NightAdvancedExtenderImpl.java
HDR advanced/HdrAdvancedExtenderImpl.java
Auto advanced/AutoAdvancedExtenderImpl.java
Bokeh advanced/BokehAdvancedExtenderImpl.java
Face Retouch advanced/BeautyAdvancedExtenderImpl.java

We use AdvancedExtenderImpl as a placeholder in the following example. Replace it with the name of the Extender file for the extension you're implementing.

Let’s see how Camera2/X invokes the extensions-interface to achieve the three app flows.

App flow 1: Check extensions availability

AdvancedAppFlow1

Figure 8. App flow 1 on Advanced Extender

First, the app checks if the given extension is supported.

App flow 2: Query information

AdvancedAppFlow2

Figure 9. App flow 2 on Advanced Extender

After calling AdvancedExtenderImpl.init(), the app can query the following the information on AdvancedExtenderImpl:

  • Estimated still capture latency: AdvancedExtenderImpl.getEstimatedCaptureLatencyRange() returns the range of the capture latency for the app to evaluate if it is appropriate to enable the extension for the current scenario.

  • Supported resolutions for preview and still capture:

    • AdvancedExtenderImpl.getSupportedPreviewOutputResolutions() returns a map of image format to the sizes list that are supported for preview surface format and size. OEMs must support at least the PRIVATE format.

    • AdvancedExtenderImpl.getSupportedCaptureOutputResolutions() returns the supported format and sizes for still capture surface. OEMs must support both JPEG and YUV_420_888 format output.

    • AdvancedExtenderImpl.getSupportedYuvAnalysisResolutions() returns the supported sizes for an extra YUV_420_888 stream for image analysis. If the image analysis YUV surface isn't supported, getSupportedYuvAnalysisResolutions() should return null or an empty list.

  • Available capture request keys/results (added in extensions-interface 1.3.0): Camera2/X invokes the following methods to retrieve the supported capture request keys and result keys from your implementation:

    • AdvancedExtenderImpl.getAvailableCaptureRequestKeys
    • AdvancedExtenderImpl.getAvailableCaptureResultKeys

For more information, see Support capture request keys and results.

App flow 3: Preview/still capture with extension enabled

AdvancedAppFlow3

Figure 10. App flow 3 on Advanced Extender

The above diagram shows the main flow for starting preview and still capture for the Advanced Extender type. Let’s walk through each step.

  1. SessionProcessorImpl instance

    The core Advanced Extender implementation is in SessionProcessorImpl, which is responsible for providing customized session configuration and sending capture requests to initiate the preview and still capture request. AdvancedExtenderImpl.createSessionProcessor() is invoked to return the SessionProcessorImpl instance.

  2. initSession

    SessionProcessorImpl.initSession() initializes the session for the extension. This is where you allocate resources and return a session configuration for preparing a CameraCaptureSession.

    For the input parameters, Camera2/X specifies the output surface configurations for preview, still capture, and an optional YUV image analysis. This output surface configuration (OutputSurfaceImpl) contains the surface, size and image format that are retrieved by following methods in AdvancedExtenderImpl:

    • getSupportedPreviewOutputResolutions()
    • getSupportedCaptureOutputResolutions()
    • getSupportedYuvAnalysisResolutions()

    You must return a Camera2SessionConfigImpl instance, which consists of a list of Camera2OutputConfigImpl instances and the session parameters used for configuring CameraCaptureSession. You're responsible for outputting the correct camera images to the output surfaces passed in by Camera2/X. Here are some options to enable the output:

    • Processing in camera HAL: You can directly add the output surfaces to CameraCaptureSession with a SurfaceOutputConfigImpl implementation. This configures the supplied output surface to the camera pipeline and allows the camera HAL to process the image.
    • Processing intermediate ImageReader surface (RAW, YUV, etc): Add the intermediate ImageReader surfaces to the CameraCaptureSession with an ImageReaderOutputConfigImpl instance.

      You need to process the intermediate images and write the result image to the output surface.

    • Use Camera2 surface sharing: Use surface sharing with another surface by adding any Camera2OutputConfigImpl instance to the getSurfaceSharingOutputConfigs() method of another Camera2OutputConfigImpl instance. The surface format and size must be identical.

    All Camera2OutputConfigImpl including SurfaceOutputConfigImpland ImageReaderOutputConfigImpl must have a unique ID (getId()), which is used to specify the target surface and retrieve the image from ImageReaderOutputConfigImpl.

  3. onCaptureSessionStart and RequestProcessorImpl

    When CameraCaptureSession starts and the Camera framework invokes onConfigured(), then Camera2/X invokes SessionProcessorImpl.onCaptureSessionStart() with the Camera2 request wrapper RequestProcessImpl. Camera2/X implements RequestProcessImpl, which enables you to execute the capture requests, and retrieve images if ImageReaderOutputConfigImpl is used.

    The RequestProcessImpl APIs are similar to the Camera2 CameraCaptureSession APIs in terms of executing requests. The differences are:

    • The target surface is specified by the ID of the Camera2OutputConfigImpl instance.
    • The capability of retrieving the image of the ImageReader.

    You can call RequestProcessorImpl.setImageProcessor() with a specified Camera2OutputConfigImpl ID to register an ImageProcessorImpl instance to receive images.

    The RequestProcessImpl instance becomes invalid after Camera2/X calls SessionProcessorImpl.onCaptureSessionEnd().

  4. Start the preview and take a picture

    In the Advanced Extender implementation, you can send capture requests through the RequestProcessorImpl interface. Camera2/X notifies you to start the repeating request for preview or the still capture sequence by calling SessionProcessorImpl#startRepeating and SessionProcessorImpl#startCapture respectively. You should send capture requests to satisfy these preview and still-capture requests.

    Camera2/X also sets the capture request parameters through SessionProcessorImpl#setParameters. You must set these request parameters (if parameters are supported) on both the repeating and single requests.

    You must support at least CaptureRequest.JPEG_ORIENTATION and CaptureRequest.JPEG_QUALITY. extensions-interface 1.3.0 supports request and result keys, which are exposed by the following methods:

    • AdvancedExtenderImpl.getAvailableCaptureRequestKeys()
    • AdvancedExtenderImpl.getAvailableCaptureResultKeys()

    When developers set the keys in the getAvailableCaptureRequestKeys list, you must enable the parameters and ensure the capture result contains the keys in the getAvailableCaptureResultKeys list.

  5. startTrigger

    SessionProcessorImpl.startTrigger() is invoked to start the trigger such as CaptureRequest.CONTROL_AF_TRIGGER and CaptureRequest.CONTROL_AE_PRECAPTURE_TRIGGER. You can disregard any capture request keys that weren't advertised in AdvancedExtenderImpl.getAvailableCaptureRequestKeys().

    startTrigger() has been supported since extensions-interface 1.3.0. It enables apps to implement tap-to-focus and flash with extensions.

  6. Clean up

    When finishing a capture session, SessionProcessorImpl.onCaptureSessionEnd() is invoked ahead of closing CameraCaptureSession. After the capture session has closed, deInitSession() performs the clean up.

Support preview, still capture, and image analysis

You should apply the extension for both the preview and still capture use cases. However, if the latency is too high to smoothly show the preview, you can apply the extension only for still capture.

For the Basic Extender type, regardless of enabling the extension for preview, you must implement both ImageCaptureExtenderImpl and PreviewExtenderImpl for a given extension. Often, an app also uses a YUV stream to analyze the image content such as finding QR codes or text. To better support this use case , you should support the stream combination of preview, still capture, and a YUV_420_888 stream for configuring CameraCaptureSession. This means that if you implement a processor, then you have to support the stream combination of three YUV_420_888 streams.

For Advanced Extender, Camera2/X passes three output surfaces to the SessionProcessorImpl.initSession() call. These output surfaces are for preview , still capture, and image analysis, respectively. You must ensure that preview and still capture output surfaces show the valid output. However, for the image analysis output surface, ensure it's working only when it's non-null. If your implementation can't support the image analysis stream, you can return an empty list in AdvancedExtenderImpl.getSupportedYuvAnalysisResolutions(). This ensures the image analysis output surface is always null in SessionProcessorImpl.initSession().

Support video capture

The current Camera Extension architecture supports only the preview and still capture use cases. We don't support enabling the extension on the MediaCodec or MediaRecorder surfaces for recording the video. However, it's possible for apps to record the preview output.

Supporting MediaCodec and MediaRecorder surfaces is under investigation.

Extension-specific metadata

For Android 14 and higher, extension-specific metadata lets camera extension clients set and receive extension specific capture request settings and results. Specifically, camera extension clients can use the EXTENSION_STRENGTH capture request parameter to control the extension strength and the EXTENSION_CURRENT_TYPE capture result to indicate the enabled extension type.

Capture requests

The EXTENSION_STRENGTH capture request parameter controls the strength of the extension post-processing effect. The corresponding capture result includes the default strength value if this parameter isn't set explicitly by the client. This parameter can be applied as follows for these extension types:

  • BOKEH: Controls the amount of blur.
  • HDR and NIGHT: Controls the amount of images fused and the brightness of the final image.
  • FACE_RETOUCH: Controls the amount of cosmetic enhancement and skin smoothing.

The supported range for the EXTENSION_STRENGTH parameter is between 0 and 100, with 0 indicating no extension processing or simple passthrough and 100 indicating the maximum extension strength of the processing effect.

To add support for EXTENSION_STRENGTH, use the vendor specific parameter APIs introduced in version 1.3.0 of the extension library interface. For more information, see getAvailableCaptureRequestKeys().

Capture results

The EXTENSION_CURRENT_TYPE capture result lets extension implementations notify clients about the active extension type.

Because extensions using the AUTO type dynamically switch between extension types such as HDR and NIGHT depending on the scene conditions, camera extensions apps can use EXTENSION_CURRENT_TYPE to display information about the current extension selected by the AUTO extension.

Real-time still capture latency estimate

For Android 14 and higher, camera extension clients can query real-time still capture latency estimates based on the scene and environment conditions using getRealtimeStillCaptureLatency(). This method provides more accurate estimates than the static getEstimatedCaptureLatencyRangeMillis() method. Based on the latency estimate, apps can decide to skip extension processing or to display an indication to notify users about a long running operation.

CameraExtensionSession.StillCaptureLatency latency;

latency = extensionSession.getRealtimeStillCaptureLatency();

// The capture latency from ExtensionCaptureCallback#onCaptureStarted() until ExtensionCaptureCallback#onCaptureProcessStarted().

latency.getCaptureLatency();

// The processing latency from  ExtensionCaptureCallback#onCaptureProcessStarted() until  the processed frame returns to the client.

latency.getProcessingLatency();

To support real-time still capture latency estimates, implement the following:

Capture processing progress callbacks

For Android 14 and higher, camera extension clients can receive callbacks for the progress of long running still capture processing operations. Apps can display the current progress to users to improve the overall user experience.

Apps can use the following code to integrate this feature:

import android.hardware.camera2.CameraExtensionSession.
ExtensionCaptureCallback;

{
…
  class AppCallbackImpl extends ExtensionCaptureCallback {
…
    @Override
    public void onCaptureProcessProgressed(
      @NonNull CameraExtensionSession session,
      @NonNull CaptureRequest request,
      @IntRange(from = 0, to = 100) int progress) {
      // Update app UI with current progress
    }
  }
…
}

To support capture processing progress callbacks, your extension vendor implementation must call the following callbacks with the current progress value:

Postview still capture

For Android 14 and higher, camera extensions can supply a postview (preview image) using setPostviewOutputConfiguration. To improve the user experience, apps can display a postview image as a placeholder when an extension is experiencing increased processing latency, and replace the image when the final image is available. Apps can configure and issue postview capture requests using the following reference code:

{
…
if (!CameraExtensionCharacteristics.isPostviewAvailable()) {
    continue;
}
…
ExtensionSessionConfiguration extensionConfiguration = new
        ExtensionSessionConfiguration(
                CameraExtensionCharacteristics.EXTENSION_NIGHT,
                outputConfig,
                backgroundExecutor,
                extensionSessionStateCallback
    );

extensionConfiguration.setPostviewOutputConfiguration(
    postviewImageOutput);
…
CaptureRequest.Builder captureRequestBuilder =
    cameraDevice.createCaptureRequest(
        CameraDevice.TEMPLATE_STILL_CAPTURE);
captureRequestBuilder.addTarget(stillImageReader.getSurface());
captureRequestBuilder.addTarget(postviewImageSurface);

CaptureRequest captureRequest = captureRequestBuilder.build();
…
}

To support postview still capture, your vendor implementation must implement the following:

Support SurfaceView output

For Android 14 and higher, camera extension clients can use power and performance optimized preview render paths by registering a SurfaceView instance for preview output for repeating requests.

To support SurfaceView output, your vendor extension implementation must be capable of streaming and outputting preview to SurfaceView instances. To verify that this is supported, run the SurfaceViewExtensionPreviewTest.java CTS module.

Vendor specific session types

The feature enables vendor extension implementations to select a vendor specific session type that will be set in the internal camera capture session instead of the default value.

The feature works entirely within the framework and vendor stack and has no client/public visible API impact.

To select a vendor-specific session type, implement the following for your extension libraries: * ExtenderStateListener.onSessionType() for basic extensions * Camera2SessionConfigImpl.getSessionType() for advanced extensions

Extensions interface version history

The following table shows the Camera Extension interface version history. You should always implement the vendor library with the latest version.

Version Added features
1.0.0
  • Version verification
    • ExtensionVersionImpl
  • Basic Extender
    • PreviewExtenderImpl
    • ImageCaptureExtenderImpl
    • Processor
      • PreviewImageProcessorImpl
      • CaptureProcessorImpl
      • RequestUpdateProcessorImpl
1.1.0
  • Library initialization
    • InitializerImpl
  • Expose supported resolutions
    • PreviewExtenderImpl.getSupportedResolutions
    • ImageCaptureExtenderImpl.getSupportedResolutions
1.2.0
  • AdvancedExtender
    • AdvancedExtenderImpl
    • SessionProcessorImpl
  • Get estimated capture latency
    • ImageCaptureExtenderImpl.getEstimatedCaptureLatencyRange
1.3.0
  • Expose supported capture request keys/results keys
    • ImageCaptureExtenderImpl.getAvailableCaptureRequestKeys and getAvailableCaptureResultKeys
    • AdvancedExtenderImpl.getAvailableCaptureRequestKeys and getAvailableCaptureResultKeys
    • New process() call that takes ProcessResultImpl in PreviewImageProcessorImpl and CaptureProcessorImpl
    • Support trigger type request
      • AdvancedExtenderImpl.startTrigger
1.4.0
  • Extension-specific metadata
  • Dynamic still capture latency estimates
  • Capture processing progress callbacks
  • Postview still capture
  • Support for SurfaceView output
  • Vendor specific session types

Reference implementation

The following reference OEM vendor library implementations are available in frameworks/ex.

  • advancedSample: A basic implementation of Advanced Extender.

  • sample: A basic implementation of Basic Extender.

  • service_based_sample: An implementation that demonstrates how to host Camera Extensions in a Service. This implementation contains the following components:

    • oem_library: A Camera Extensions OEM library for Camera2 and CameraX Extensions APIs that implements Extensions-Interface. This acts as a passthrough that forwards calls from Extensions-Interface to the service. This library also provides AIDL files and wrapper classes to communicate with the service.

      Advanced Extender is enabled by default. To enable the Basic Extender, change ExtensionsVersionImpl#isAdvancedExtenderImplemented to return false.

    • extensions_service: A sample implementation of the Extensions Service. Add your implementation here. The interface to implement in the service is similar to the Extensions-Interface. For example, implementing the IAdvancedExtenderImpl.Stub performs the same operations as AdvancedExtenderImpl. ImageWrapper and TotalCaptureResultWrapper are required to make Image and TotalCaptureResult parcelable.

Set up the vendor library on a device

The OEM vendor library isn't built into an app; it's loaded from the device at runtime by Camera2/X. In CameraX, the <uses-library> tag declares that the androidx.camera.extensions.impl library, which is defined in the AndroidManifest.xml file of the camera-extensions library, is a dependency of CameraX and must be loaded at runtime. In Camera2, the framework loads an extensions service that also declares that the <uses-library>loads the same androidx.camera.extensions.impl library at runtime.

This allows third-party apps using extensions to automatically load the OEM vendor library. The OEM library is marked as optional so apps can run on devices that don't have the library on the device. Camera2/X handles this behavior automatically when an app tries to use a camera extension as long as the device manufacturer places the OEM library on the device so that it can be discovered by the app.

To set up the OEM library on a device, do the following:

  1. Add a permission file, which is required by the <uses-library> tag, using the following format: /etc/permissions/ANY_FILENAME.xml. For example, /etc/permissions/camera_extensions.xml. The files in this directory provide a mapping of the library named in <uses-library> to the actual file path on the device.
  2. Use the example below to add the required information to the file.

    • name must be androidx.camera.extensions.impl as that's the library that CameraX searches for.
    • file is the absolute path of the file that contains the extensions implementation (for example, /system/framework/androidx.camera.extensions.impl.jar).
    <?xml version="1.0" encoding="utf-8"?>
    <permissions>
        <library name="androidx.camera.extensions.impl"
                 file="OEM_IMPLEMENTED_JAR" />
    </permissions>
    

In Android 12 or higher, devices supporting CameraX extensions must have the ro.camerax.extensions.enabled property set to true, which allows for querying whether a device supports extensions. To do this, add the following line in the device make file:

PRODUCT_VENDOR_PROPERTIES += \
    ro.camerax.extensions.enabled=true \

Validation

To test your implementation of the OEM vendor library during the development stage, use the example app at androidx-main/camera/integration-tests/extensionstestapp/, which runs through various vendor extensions.

After you complete your implementation, use the Camera Extensions Validation Tool to run automated and manual tests to verify that the vendor library is implemented correctly.

Extended scene mode versus Camera Extensions

For the bokeh extension, in addition to exposing it using Camera Extensions, you can expose the extension using the extended scene mode, which is enabled through the CONTROL_EXTENDED_SCENE_MODE key. For more implementation details, see Camera Bokeh.

Extended scene mode has fewer restrictions compared to Camera Extensions for camera2 apps. For example, you can enable extended scene mode in a regular CameraCaptureSession instance that supports flexible stream combinations and capture request parameters. In contrast, camera extensions support only a fixed set of stream types and have limited support for capture request parameters.

A downside of extended scene mode is that you can only implement it in the camera HAL, which means that it must be verified to work across all orthogonal controls available to app developers.

We recommend exposing bokeh using both the extended scene mode and Camera Extensions because apps might prefer to use a particular API to enable bokeh. We recommend first using the extended scene mode because this is the most flexible way for apps to enable the bokeh extension. Then you can implement the camera extensions interface based on the extended scene mode. If implementing bokeh in the camera HAL is difficult, for example, because it requires a post processor running in the app layer to process images, we recommend implementing the bokeh extension using the Camera Extensions interface.

Frequently asked questions (FAQs)

Are there any restrictions on API levels?

Yes. This depends on the Android API feature set that's required by the OEM vendor library implementation. For example, ExtenderStateListener.onPresetSession() uses the SessionConfiguration.setSessionParameters() call to set a baseline set of tags. This call is available only on API level 28 and higher. For details on specific interface methods, see the API reference documentation.