Począwszy od systemu Android 12, system Android może opcjonalnie korzystać z globalnego systemu nawigacji satelitarnej (GNSS), aby sugerować czasy epok systemu Unix usłudze time_detector . Nie jest to domyślnie włączone w AOSP.
Gdy włączone jest wykrywanie czasu GNSS, gnss_time_update_service
pasywnie nasłuchuje aktualizacji lokalizacji ze źródeł GNSS i przesyła sugestie GNSS do usługi time_detector
. Usługa time_detector
określa następnie, czy zaktualizować zegar systemowy, aby odpowiadał sugestii.
Wpływ na zużycie energii
Usługa AOSP gnss_time_update_service
biernie nasłuchuje aktualizacji lokalizacji. Oznacza to, że nigdy aktywnie nie włącza GPS i nie zużywa dodatkowej energii. Oznacza to również, że jeśli inna aplikacja lub usługa w systemie aktywnie nie żąda aktualizacji lokalizacji, usługa gnss_time_update_service
nie otrzyma aktualizacji lokalizacji i nie zasugeruje czasu GNSS.
Realizacja
Aby umożliwić wykrywanie czasu GNSS, producenci urządzeń muszą jawnie włączyć gnss_time_update_service
na serwerze systemowym.
Aby włączyć tę funkcję, należy zaktualizować zarówno wartości config_enableGnssTimeUpdateService
, jak i config_autoTimeSourcesPriority
w pliku core/res/res/values/config.xml
. Ustaw wartość config_enableGnssTimeUpdateService
na true
i dodaj gnss
do listy elementów dla config_autoTimeSourcesPriority
. Pozycja gnss
na liście priorytetów określa priorytet nadawany sugestiom GNSS w stosunku do sugestii z innych źródeł.
Poniżej znajduje się przykładowy plik core/res/res/values/config.xml
, w którym włączono wykrywanie czasu GNSS, a gnss
zajmuje trzecie miejsce na liście priorytetów po network
i telephony
.
<!-- Specifies priority of automatic time sources. Suggestions from higher entries in the list
take precedence over lower ones.
See com.android.server.timedetector.TimeDetectorStrategy for available sources. -->
<string-array name="config_autoTimeSourcesPriority">
<item>network</item>
<item>telephony</item>
<item>gnss</item>
</string-array>
<!-- Enables the GnssTimeUpdate service. This is the global switch for enabling Gnss time based
suggestions to TimeDetector service. See also config_autoTimeSourcesPriority. -->
<bool name="config_enableGnssTimeUpdateService">true</bool>
Debugowanie i testowanie
Aby przetestować wykrywanie czasu GNSS, możesz użyć poleceń adb shell cmd location
. Użyj tych poleceń, aby dodać dostawców lokalizacji testowych, w których możesz określić lokalizację i powiązany czas GNSS. Usługa gnss_time_update_service
nasłuchuje aktualizacji lokalizacji i okresowo przedstawia sugestie.
Poniżej przedstawiono przykłady poleceń adb shell cmd location
:
# Enable Master Location Switch in the foreground user (usually user 10 on automotive). If you just flashed, this can be done through setup wizard.adb shell cmd location set-location-enabled true --user 10
# Add GPS test provider (This usually fails the first time. Will throw a SecurityException with "android from <SOME_UID> not allowed to perform MOCK_LOCATION".)adb shell cmd location providers add-test-provider gps
# Enable mock location permissions for previous UIDadb shell appops set UID_PRINTED_IN_PREVIOUS_ERROR android:mock_location allow
# Add GPS test provider (Should work with no errors.)adb shell cmd location providers add-test-provider gps
# Enable GPS test provideradb shell cmd location providers set-test-provider-enabled gps true
# Set location with time (Time can't be lower than the limit set by the lower bound.)adb shell cmd location providers set-test-provider-location gps --location LATITUDE,LONGITUDE --time TIME