অ্যান্ড্রয়েড 13
20 মার্চ, 2023
2. ডিভাইসের ধরন
রিভিশন দেখুন
যদি হ্যান্ডহেল্ড ডিভাইস বাস্তবায়নের সেটিংস অ্যাপ্লিকেশন কার্যকলাপ এমবেডিং ব্যবহার করে একটি বিভক্ত কার্যকারিতা প্রয়োগ করে, তাহলে তারা:
- [
C-17-13.2.3.1/ H-1-1 ] বিভক্ত কার্যকারিতা চালু থাকাকালীন সেটিংস#ACTION_SETTINGS_EMBED_DEEP_LINK_ACTIVITY উদ্দেশ্য পরিচালনা করে এমন একটি কার্যকলাপ থাকতে হবে৷ কার্যকলাপটি অবশ্যইandroid.permission.LAUNCH_MULTI_PANE_SETTINGS_DEEP_LINK
দ্বারা সুরক্ষিত থাকতে হবে এবং এটি অবশ্যই সেটিংস#EXTRA_SETTINGS_EMBEDDED_DEEP_LINK_INTENT_URI থেকে পার্স করা অভিপ্রায়ের কার্যকলাপ শুরু করতে হবে।
- [
রিভিশন দেখুন
যদি VP9 হার্ডওয়্যার ডিকোডার সহ টেলিভিশন ডিভাইস বাস্তবায়ন VP9 ডিকোডিং এবং UHD ডিকোডিং প্রোফাইল সমর্থন করে, তারা:
- [ 5.3.7 /টি-
2-1SR1 ] প্রোফাইল 2 (10 বিট রঙের গভীরতা) সহ প্রতি সেকেন্ডে 60 ফ্রেমে UHD ডিকোডিং প্রোফাইল সমর্থন করার জন্য দৃঢ়ভাবে সুপারিশ করা হয়।
- [ 5.3.7 /টি-
রিভিশন দেখুন
স্বয়ংচালিত ডিভাইস বাস্তবায়ন:
[ 7.3 /A-
0-1SR1 ] অতিরিক্ত সেন্সর দিয়ে জিপিএস/জিএনএসএস ফিউজ করে লোকেশন ডেড রেকন করতে পারে। যদি অবস্থানটি মৃত হিসাবে গণ্য করা হয়, তবে সংশ্লিষ্ট সেন্সর প্রকার এবং/অথবা যানবাহনের সম্পত্তি আইডিগুলি প্রয়োগ এবং রিপোর্ট করার জন্য এটি দৃঢ়ভাবে সুপারিশ করা হয়।[ 7.3 /A-
0-20-4 ] LocationManager#requestLocationUpdates() এর মাধ্যমে অনুরোধ করা অবস্থানটি অবশ্যই মানচিত্রের সাথে মিলে যাবে না।
3. সফটওয়্যার
রিভিশন দেখুন
নতুন প্রয়োজনীয়তা শুরু করুন
নতুন পরিচিতির জন্য ডিফল্ট অ্যাকাউন্ট: পরিচিতি প্রদানকারী একটি নতুন পরিচিতি তৈরি করার সময় ডিফল্ট অ্যাকাউন্টের সেটিং পরিচালনা করতে API প্রদান করে।
যদি ডিভাইস বাস্তবায়ন একটি পরিচিতি অ্যাপ প্রিলোড করে, তাহলে প্রি-লোড করা পরিচিতি অ্যাপ:
[C-2-1] অ্যাকাউন্ট নির্বাচনের জন্য একটি UI লঞ্চ করার জন্য অভিপ্রায়
ContactsContract.Settings.ACTION_SET_DEFAULT_ACCOUNT
পরিচালনা করতে হবে এবং যখন একটি অ্যাকাউন্ট নির্বাচন করা হয় তখন পরিচিতি প্রদানকারীতে সেটিংটি সংরক্ষণ করুন৷[C-2-2]
ContactsContracts.Contacts.CONTENT_TYPE
Intent.ACTION_INSERT and Intent.ACTION_INSERT_OR_EDIT
পরিচালনাContactsContract.RawContacts.CONTENT_TYPE
সময় অবশ্যই ডিফল্ট অ্যাকাউন্ট সেটিং মেনে চলতে হবে।
3.2.3.5। শর্তাধীন আবেদন অভিপ্রায়
রিভিশন দেখুন
[2.2.3 এ সরানো হয়েছে]
নতুন প্রয়োজনীয়তা শুরু করুন
যদি ডিভাইস বাস্তবায়নের সেটিংস অ্যাপ্লিকেশন কার্যকলাপ এমবেডিং ব্যবহার করে একটি বিভক্ত কার্যকারিতা প্রয়োগ করে, তাহলে তারা:
- [C-17-1] বিভক্ত কার্যকারিতা চালু থাকলে সেটিংস#ACTION_SETTINGS_EMBED_DEEP_LINK_ACTIVITY উদ্দেশ্য পরিচালনা করে এমন একটি কার্যকলাপ থাকতে হবে। কার্যকলাপটি অবশ্যই
android.permission.LAUNCH_MULTI_PANE_SETTINGS_DEEP_LINK
দ্বারা সুরক্ষিত থাকতে হবে এবং এটি অবশ্যই সেটিংস#EXTRA_SETTINGS_EMBEDDED_DEEP_LINK_INTENT_URI থেকে পার্স করা অভিপ্রায়ের কার্যকলাপ শুরু করতে হবে।
- [C-17-1] বিভক্ত কার্যকারিতা চালু থাকলে সেটিংস#ACTION_SETTINGS_EMBED_DEEP_LINK_ACTIVITY উদ্দেশ্য পরিচালনা করে এমন একটি কার্যকলাপ থাকতে হবে। কার্যকলাপটি অবশ্যই
6. বিকাশকারীর সরঞ্জাম এবং বিকল্পগুলির সামঞ্জস্য
রিভিশন দেখুন
- বানর
- [C-0-8] মাঙ্কি ফ্রেমওয়ার্ক অবশ্যই অন্তর্ভুক্ত করতে হবে এবং অ্যাপ্লিকেশন ব্যবহারের জন্য এটি উপলব্ধ করতে হবে।
- বানর
7. হার্ডওয়্যার সামঞ্জস্য
রিভিশন দেখুন
[৭.৪.৯ এ সরানো হয়েছে]
নতুন প্রয়োজনীয়তা শুরু করুন
যদি ডিভাইস বাস্তবায়ন 802.1.15.4-এর জন্য সমর্থন অন্তর্ভুক্ত করে এবং একটি তৃতীয় পক্ষের অ্যাপ্লিকেশনে কার্যকারিতা প্রকাশ করে, তারা:
- [C-1-1] android.uwb-এ সংশ্লিষ্ট Android API প্রয়োগ করতে হবে।
- [C-1-2] হার্ডওয়্যার বৈশিষ্ট্য পতাকা android.hardware.uwb রিপোর্ট করতে হবে।
- [C-1-3] অ্যান্ড্রয়েড বাস্তবায়নে সংজ্ঞায়িত সমস্ত প্রাসঙ্গিক UWB প্রোফাইল সমর্থন করতে হবে।
- [C-1-4] ব্যবহারকারীকে UWB রেডিও চালু/বন্ধ অবস্থায় টগল করার অনুমতি দেওয়ার জন্য অবশ্যই একটি ব্যবহারকারীর সামর্থ্য প্রদান করতে হবে।
- [C-1-5] UWB রেডিও ব্যবহার করা অ্যাপগুলিকে UWB_RANGING অনুমতি (NEARBY_DEVICES অনুমতি গোষ্ঠীর অধীনে) ধারণ করতে হবে।
- [C-1-6] FIRA , CCC এবং CSA সহ স্ট্যান্ডার্ড সংস্থাগুলির দ্বারা সংজ্ঞায়িত প্রাসঙ্গিক সামঞ্জস্য এবং শংসাপত্র পরীক্ষায় উত্তীর্ণ হওয়ার জন্য দৃঢ়ভাবে সুপারিশ করা হয়৷
রিভিশন দেখুন
যদি ডিভাইস বাস্তবায়ন
জিএসএম বা সিডিএমএ টেলিফোনি অন্তর্ভুক্তandroid.hardware.telephony
বৈশিষ্ট্যটি রিপোর্ট করুন , তারপর:- [C-6-1]
SmsManager#sendTextMessage
এবংSmsManager#sendMultipartTextMessage
অবশ্যই টেক্সট মেসেজিং কার্যকারিতা প্রদানের জন্যCarrierMessagingService
এর সাথে সংশ্লিষ্ট কলের ফলাফল করবে।SmsManager#sendMultimediaMessage
এবংSmsManager#downloadMultimediaMessage
মাল্টিমিডিয়া মেসেজিং কার্যকারিতা প্রদানের জন্যCarrierMessagingService
এর সাথে সংশ্লিষ্ট কলের ফলাফল হতে হবে। - [C-6-2]
android.provider.Telephony.Sms#getDefaultSmsPackage
দ্বারা মনোনীত অ্যাপ্লিকেশনটি এসএমএস এবং এমএমএস বার্তা প্রেরণ এবং গ্রহণ করার সময় অবশ্যই SmsManager API ব্যবহার করতে হবে। প্যাকেজ/অ্যাপস/মেসেজিং-এ AOSP রেফারেন্স বাস্তবায়ন এই প্রয়োজনীয়তা পূরণ করে। - [C-6-3] যে অ্যাপ্লিকেশনটি
Intent#ACTION_DIAL
এ সাড়া দেয় সেটি অবশ্যই*#*#CODE#*#*
ফরম্যাট করা নির্বিচারে ডায়ালার কোডের এন্ট্রি সমর্থন করবে এবং একটি সংশ্লিষ্টTelephonyManager#ACTION_SECRET_CODE
সম্প্রচার ট্রিগার করবে। - [C-6-4] যে অ্যাপ্লিকেশনটি
Intent#ACTION_DIAL
এ সাড়া দেয় সেটি অবশ্যইVoicemailContract.Voicemails#TRANSCRIPTION
ব্যবহার করতে হবে ব্যবহারকারীদের কাছে ভিজ্যুয়াল ভয়েসমেল ট্রান্সক্রিপশন প্রদর্শন করতে যদি এটি ভিজ্যুয়াল ভয়েসমেল ট্রান্সক্রিপশন সমর্থন করে। - [C-6-5] সিম কার্ডের তথ্য প্রদর্শন এবং নিয়ন্ত্রণ করে এমন সমস্ত ব্যবহারকারী-দৃশ্যমান সুযোগ-সুবিধাগুলিতে একটি একক সাবস্ক্রিপশন হিসাবে সমতুল্য গ্রুপ UUID সহ সমস্ত SubscriptionInfo উপস্থাপন করতে হবে। এই ধরনের সামর্থ্যের উদাহরণগুলির মধ্যে সেটিংস ইন্টারফেস অন্তর্ভুক্ত যা
Settings#ACTION_MANAGE_ALL_SIM_PROFILES_SETTINGS
বাEuiccManager#ACTION_MANAGE_EMBEDDED_SUBSCRIPTIONS
সাথে মেলে। - [C-6-6] সিম কার্ড সেটিংস কনফিগারেশন বা নিয়ন্ত্রণের অনুমতি দেয় এমন কোনও ব্যবহারকারী-দৃশ্যমান সুযোগ-সুবিধাগুলিতে নন-নাল গ্রুপ UUID এবং সুবিধাবাদী বিট সহ কোনও সাবস্ক্রিপশন ইনফো প্রদর্শন বা নিয়ন্ত্রণের অনুমতি দেওয়া উচিত নয়।
ডিভাইস বাস্তবায়ন হলে
জিএসএম বা সিডিএমএ টেলিফোনি অন্তর্ভুক্তandroid.hardware.telephony
বৈশিষ্ট্যটি রিপোর্ট করুন এবং একটি সিস্টেম স্ট্যাটাস বার প্রদান করুন, তারপর:- [গ-
6-7 -1 ] একটি প্রদত্ত গ্রুপ UUID- এর জন্য একটি প্রতিনিধি সক্রিয় সাবস্ক্রিপশন নির্বাচন করতে হবে যাতে ব্যবহারকারীর কাছে সিম স্ট্যাটাস তথ্য প্রদান করে এমন যেকোনো সুযোগ-সুবিধা প্রদর্শন করতে পারে। এই ধরনের সুবিধার উদাহরণগুলির মধ্যে রয়েছে স্ট্যাটাস বার সেলুলার সিগন্যাল আইকন বা দ্রুত সেটিংস টাইল। - [C-SR-1] এটা দৃঢ়ভাবে সুপারিশ করা হয় যে প্রতিনিধি সাবস্ক্রিপশনটিকে সক্রিয় ডেটা সাবস্ক্রিপশন হিসাবে বেছে নেওয়া হয় যদি না ডিভাইসটি ভয়েস কলে থাকে, এই সময়ে এটি দৃঢ়ভাবে সুপারিশ করা হয় যে প্রতিনিধি সদস্যতা হল সক্রিয় ভয়েস সাবস্ক্রিপশন।
যদি ডিভাইস বাস্তবায়ন
জিএসএম বা সিডিএমএ টেলিফোনি অন্তর্ভুক্তandroid.hardware.telephony
বৈশিষ্ট্যটি রিপোর্ট করুন , তারপর:- [গ-6-
87 ] ETSI TS 102 221 প্রতি UICC-এর জন্য সর্বাধিক সংখ্যক লজিক্যাল চ্যানেল (মোট 20) খুলতে এবং একই সাথে ব্যবহার করতে সক্ষম হতে হবে। - [গ-6-
108 ] স্বয়ংক্রিয়ভাবে বা স্পষ্ট ব্যবহারকারীর নিশ্চিতকরণ ছাড়াই সক্রিয় ক্যারিয়ার অ্যাপে (যেমনTelephonyManager#getCarrierServicePackageName
দ্বারা মনোনীত হয়েছে) নিম্নলিখিত আচরণগুলির কোনটি প্রয়োগ করা উচিত নয়:- নেটওয়ার্ক অ্যাক্সেস প্রত্যাহার বা সীমাবদ্ধ করুন
- অনুমতি প্রত্যাহার করুন
- AOSP-এ অন্তর্ভুক্ত বিদ্যমান পাওয়ার ম্যানেজমেন্ট বৈশিষ্ট্যের বাইরে পটভূমি বা ফোরগ্রাউন্ড অ্যাপ এক্সিকিউশন সীমাবদ্ধ করুন
- অ্যাপটি নিষ্ক্রিয় বা আনইনস্টল করুন
যদি ডিভাইস বাস্তবায়ন
জিএসএম বা সিডিএমএ টেলিফোনি অন্তর্ভুক্তandroid.hardware.telephony
বৈশিষ্ট্যের রিপোর্ট করুন এবং সমস্ত সক্রিয়, অ-সুযোগবাদী সাবস্ক্রিপশন যা একটি গ্রুপ UUID ভাগ করে তা নিষ্ক্রিয় করা হয়েছে, ডিভাইস থেকে শারীরিকভাবে সরানো হয়েছে, বা সুবিধাবাদী চিহ্নিত করা হয়েছে, তারপর ডিভাইসটিকে:- [গ-
78 -1] একই গ্রুপে থাকা সমস্ত সক্রিয় সুবিধাবাদী সদস্যতা স্বয়ংক্রিয়ভাবে নিষ্ক্রিয় করতে হবে।
যদি ডিভাইস বাস্তবায়নে জিএসএম টেলিফোনি অন্তর্ভুক্ত থাকে তবে সিডিএমএ টেলিফোনি না থাকে, তারা:
- [গ-
89 -1]PackageManager#FEATURE_TELEPHONY_CDMA
ঘোষণা করা উচিত নয়। - [গ-
89 -2] পছন্দের বা অনুমোদিত নেটওয়ার্ক টাইপ বিটমাস্কে যেকোন 3GPP2 নেটওয়ার্ক প্রকার সেট করার চেষ্টা করার সময় অবশ্যই একটিIllegalArgumentException
নিক্ষেপ করতে হবে। - [গ-
89 -3]TelephonyManager#getMeid
থেকে একটি খালি স্ট্রিং ফেরত দিতে হবে।
যদি ডিভাইস বাস্তবায়ন একাধিক পোর্ট এবং প্রোফাইল সহ eUICC সমর্থন করে, তারা:
- [গ-
1110 -1] অবশ্যইandroid.hardware.telephony.euicc.mep
বৈশিষ্ট্য পতাকা ঘোষণা করতে হবে।
- [C-6-1]
রিভিশন দেখুন
ডিভাইস বাস্তবায়ন যদিযদি ডিভাইস বাস্তবায়নে 802.1.15.4 এর জন্য সমর্থন অন্তর্ভুক্ত থাকে এবং একটি তৃতীয় পক্ষের অ্যাপ্লিকেশনের কার্যকারিতা প্রকাশ করে, তাহলে তারা:android.content.pm.PackageManager
ক্লাসের মাধ্যমেandroid.hardware.uwb
বৈশিষ্ট্যের জন্য সমর্থন জানায়,নতুন প্রয়োজনীয়তা শুরু করুন
- [C-1-1] android.uwb-এ সংশ্লিষ্ট Android API প্রয়োগ করতে হবে।
- [C-1-2] হার্ডওয়্যার বৈশিষ্ট্য পতাকা android.hardware.uwb রিপোর্ট করতে হবে।
- [C-1-3] অ্যান্ড্রয়েড বাস্তবায়নে সংজ্ঞায়িত সমস্ত প্রাসঙ্গিক UWB প্রোফাইল সমর্থন করতে হবে।
- [C-1-4] ব্যবহারকারীকে UWB রেডিও চালু/বন্ধ অবস্থায় টগল করার অনুমতি দেওয়ার জন্য অবশ্যই একটি ব্যবহারকারীর সামর্থ্য প্রদান করতে হবে।
- [C-1-5] UWB রেডিও ব্যবহার করা অ্যাপগুলিকে UWB_RANGING অনুমতি (NEARBY_DEVICES অনুমতি গোষ্ঠীর অধীনে) ধারণ করতে হবে।
- [C-SR-1] FIRA , CCC এবং CSA সহ স্ট্যান্ডার্ড সংস্থাগুলির দ্বারা সংজ্ঞায়িত প্রাসঙ্গিক সামঞ্জস্য এবং শংসাপত্র পরীক্ষায় উত্তীর্ণ হওয়ার জন্য দৃঢ়ভাবে সুপারিশ করা হয়৷
- [গ-1-
16 ] একটি অ-প্রতিফলিত চেম্বারে 1মি দূরত্বে দৃষ্টির পরিবেশে 95% পরিমাপের জন্য দূরত্বের পরিমাপগুলি +/-15 সেন্টিমিটারের মধ্যে রয়েছে তা নিশ্চিত করতে হবে। - [গ-1-
27 ] অবশ্যই নিশ্চিত করতে হবে যে রেফারেন্স ডিভাইস থেকে 1m দূরত্ব পরিমাপের মধ্যকটি [0.75m, 1.25m] এর মধ্যে রয়েছে, যেখানে DUT-এর উপরের প্রান্ত থেকে স্থল সত্য দূরত্ব মাপা হয় এবং 45 ডিগ্রি কাত হয়। - [C-SR-2] উপস্থিতি ক্রমাঙ্কন প্রয়োজনীয়তাগুলিতে নির্দিষ্ট পরিমাপ সেটআপ পদক্ষেপগুলি অনুসরণ করার জন্য দৃঢ়ভাবে সুপারিশ করা হয়৷
উপস্থিতি ক্রমাঙ্কন প্রয়োজনীয়তাগুলিতে নির্দিষ্ট পরিমাপ সেটআপ পদক্ষেপগুলি অনুসরণ করার জন্য এটি দৃঢ়ভাবে সুপারিশ করা হয়৷রিভিশন দেখুন
ইউএসবি-সি সংযোগকারীগুলি ব্যবহার করে হেডসেট এবং অন্যান্য অডিও আনুষাঙ্গিকগুলির সাথে সামঞ্জস্যপূর্ণ হওয়ার জন্য এবং অ্যান্ড্রয়েড ইউএসবি হেডসেট স্পেসিফিকেশনে সংজ্ঞায়িত অ্যান্ড্রয়েড ইকোসিস্টেম জুড়ে বাস্তবায়ন (ইউএসবি অডিও ক্লাস)।
19 অক্টোবর, 2022
2. ডিভাইসের ধরন
রিভিশন দেখুন
হ্যান্ডহেল্ড ডিভাইস বাস্তবায়ন লক টাস্ক মোডে চলমান না হলে, যখন বিষয়বস্তু ক্লিপবোর্ডে অনুলিপি করা হয় তখন তারা:
- [3.8.17/H-1-1] ব্যবহারকারীকে অবশ্যই একটি নিশ্চিতকরণ উপস্থাপন করতে হবে যে ডেটা ক্লিপবোর্ডে অনুলিপি করা হয়েছে (যেমন, একটি থাম্বনেল বা "সামগ্রী কপি করা হয়েছে" এর সতর্কতা)। অতিরিক্তভাবে, এখানে একটি ইঙ্গিত অন্তর্ভুক্ত করুন যদি ক্লিপবোর্ড ডেটা সমস্ত ডিভাইস জুড়ে সিঙ্ক করা হবে।
3. সফটওয়্যার
3.2.3.5। শর্তাধীন আবেদন অভিপ্রায়
রিভিশন দেখুন
যদি ডিভাইস বাস্তবায়নের সেটিংস অ্যাপ্লিকেশন কার্যকলাপ এমবেডিং ব্যবহার করে একটি বিভক্ত কার্যকারিতা প্রয়োগ করে, তাহলে তারা:
- [C-17-1] বিভক্ত কার্যকারিতা চালু থাকলে সেটিংস#ACTION_SETTINGS_EMBED_DEEP_LINK_ACTIVITY উদ্দেশ্য পরিচালনা করে এমন একটি কার্যকলাপ থাকতে হবে। কার্যকলাপটি অবশ্যই
android.permission.LAUNCH_MULTI_PANE_SETTINGS_DEEP_LINK
দ্বারা সুরক্ষিত থাকতে হবে এবং এটি অবশ্যই সেটিংস#EXTRA_SETTINGS_EMBEDDED_DEEP_LINK_INTENT_URI থেকে পার্স করা অভিপ্রায়ের কার্যকলাপ শুরু করতে হবে।
যদি ডিভাইস বাস্তবায়ন
VoiceInteractionService
সমর্থন করে এবং এই API ব্যবহার করে একবারে একাধিক অ্যাপ্লিকেশন ইনস্টল করে থাকে, তারা:- [C-18-1] ভয়েস ইনপুট এবং সহায়তার জন্য একটি ডিফল্ট অ্যাপ সেটিংস মেনু দেখানোর জন্য
android.settings.ACTION_VOICE_INPUT_SETTINGS
অভিপ্রায়কে অবশ্যই সম্মান করতে হবে।
- [C-17-1] বিভক্ত কার্যকারিতা চালু থাকলে সেটিংস#ACTION_SETTINGS_EMBED_DEEP_LINK_ACTIVITY উদ্দেশ্য পরিচালনা করে এমন একটি কার্যকলাপ থাকতে হবে। কার্যকলাপটি অবশ্যই
রিভিশন দেখুন
- [C-1-4] 'প্রদত্ত কন্টেন্ট বা রিমোট ইউআরএল কন্টেন্টকে এমন একটি প্রক্রিয়ায় রেন্ডার করতে হবে যা ওয়েবভিউকে ইনস্ট্যান্টিয়েট করে এমন অ্যাপ্লিকেশন থেকে আলাদা। বিশেষত পৃথক রেন্ডারার প্রক্রিয়ার অবশ্যই নিম্ন বিশেষাধিকার থাকতে হবে, একটি পৃথক ব্যবহারকারী আইডি হিসাবে চালিত হবে, অ্যাপের ডেটা ডিরেক্টরিতে কোনও অ্যাক্সেস নেই, সরাসরি নেটওয়ার্ক অ্যাক্সেস নেই এবং কেবল বাইন্ডারের মাধ্যমে ন্যূনতম-প্রয়োজনীয় সিস্টেম পরিষেবাগুলিতে অ্যাক্সেস থাকতে হবে। WebView এর AOSP বাস্তবায়ন এই প্রয়োজনীয়তা পূরণ করে।
7. হার্ডওয়্যার সামঞ্জস্য
রিভিশন দেখুন
যদি ডিভাইস বাস্তবায়নে IEEE 802.11 স্ট্যান্ডার্ডে সংজ্ঞায়িত Wi-Fi পাওয়ার সেভ মোডের জন্য সমর্থন অন্তর্ভুক্ত থাকে, তারা:
[C-3-1] আবশ্যকযখনই একটি অ্যাপWifiManager.createWifiLock()
এবংWifiManager.WifiLock.acquire()
এর মাধ্যমেWIFI_MODE_FULL_HIGH_PERF
লক বাWIFI_MODE_FULL_LOW_LATENCY
লক অর্জন করে তখনই Wi-Fi পাওয়ার সেভ মোড বন্ধ করা উচিত
রিভিশন দেখুন
যদি ডিভাইস বাস্তবায়নে ব্লুটুথ লো এনার্জি (BLE) এর জন্য সমর্থন অন্তর্ভুক্ত থাকে, তারা:
- [C-3-5] একটি সমাধানযোগ্য ব্যক্তিগত ঠিকানা (RPA) টাইমআউট 15 মিনিটের বেশি কার্যকর করতে হবে এবং ডিভাইসটি সক্রিয়ভাবে স্ক্যানিং বা বিজ্ঞাপনের জন্য BLE ব্যবহার করার সময় ব্যবহারকারীর গোপনীয়তা রক্ষা করতে টাইমআউটের সময় ঠিকানাটি ঘোরাতে হবে। টাইমিং আক্রমণ প্রতিরোধ করার জন্য, টাইম আউট ব্যবধানগুলিও 5 থেকে 15 মিনিটের মধ্যে এলোমেলো করা আবশ্যক৷
7.5.5 ক্যামেরা ওরিয়েন্টেশন
রিভিশন দেখুন
যদি ডিভাইস বাস্তবায়নে সামনে বা পেছনের দিকের ক্যামেরা থাকে, তাহলে এই ধরনের ক্যামেরা:
- [C-1-1] অবশ্যই ওরিয়েন্টেড হতে হবে যাতে ক্যামেরার লম্বা ডাইমেনশন স্ক্রিনের লম্বা ডাইমেনশনের সাথে সারিবদ্ধ হয়। অর্থাৎ, যখন ডিভাইসটিকে ল্যান্ডস্কেপ ওরিয়েন্টেশনে রাখা হয়, ক্যামেরাগুলিকে অবশ্যই ল্যান্ডস্কেপ ওরিয়েন্টেশনে ছবি তুলতে হবে। এটি ডিভাইসের প্রাকৃতিক অভিযোজন নির্বিশেষে প্রযোজ্য; অর্থাৎ, এটি ল্যান্ডস্কেপ-প্রাথমিক ডিভাইসের পাশাপাশি প্রতিকৃতি-প্রাথমিক ডিভাইসের ক্ষেত্রে প্রযোজ্য।
নিম্নলিখিত সমস্ত মানদণ্ড পূরণ করে এমন ডিভাইসগুলি উপরের প্রয়োজনীয়তা থেকে মুক্ত:- ডিভাইসটি পরিবর্তনশীল-জ্যামিতি স্ক্রীন প্রয়োগ করে, যেমন ভাঁজযোগ্য বা কব্জা প্রদর্শন।
- যখন ডিভাইসের ভাঁজ বা কব্জা অবস্থা পরিবর্তিত হয়, তখন ডিভাইসটি পোর্ট্রেট-প্রাথমিক থেকে ল্যান্ডস্কেপ-প্রাথমিক (বা বিপরীতে) অভিযোজনের মধ্যে স্যুইচ করে।
9. নিরাপত্তা মডেল সামঞ্জস্য
রিভিশন দেখুন
যখন ডিভাইস বাস্তবায়ন একটি নিরাপদ লক স্ক্রীন সমর্থন করে, তখন এটি:
- [C-1-6] IKeymasterDevice 4.0, IKeymasterDevice 4.1, IKeyMintDevice সংস্করণ 1 বা IKeyMintDevice সংস্করণ 2 সমর্থন করতে হবে।
9.17 অ্যান্ড্রয়েড ভার্চুয়ালাইজেশন ফ্রেমওয়ার্ক
রিভিশন দেখুন
যদি ডিভাইসটি Android ভার্চুয়ালাইজেশন ফ্রেমওয়ার্ক API (
android.system.virtualmachine.*
), Android হোস্টের জন্য সমর্থন প্রয়োগ করে:[C-1-3] আপস্ট্রিম অ্যান্ড্রয়েড ওপেন সোর্স প্রজেক্ট (AOSP)-এ প্রদত্ত সিস্টেম/সিপলিসির মধ্যে উপস্থিত neverallow নিয়মগুলি সংশোধন, বাদ দেওয়া বা প্রতিস্থাপন করা উচিত নয় এবং নীতিটি অবশ্যই উপস্থিত সমস্ত neverallow নিয়মগুলির সাথে কম্পাইল করা উচিত৷
যদি ডিভাইসটি অ্যান্ড্রয়েড ভার্চুয়ালাইজেশন ফ্রেমওয়ার্ক API (
android.system.virtualmachine.*
) এর জন্য সমর্থন প্রয়োগ করে, তাহলে যেকোনো সুরক্ষিত ভার্চুয়াল মেশিনের উদাহরণ:[C-2-4] আপস্ট্রিম অ্যান্ড্রয়েড ওপেন সোর্স প্রজেক্টে (AOSP) সরবরাহ করা সিস্টেম/সেপলিসি/মাইক্রোড্রয়েডের মধ্যে উপস্থিত নভারঅ্যালো নিয়মগুলি সংশোধন, বাদ দেওয়া বা প্রতিস্থাপন করা উচিত নয়।
যদি ডিভাইসটি অ্যান্ড্রয়েড ভার্চুয়ালাইজেশন ফ্রেমওয়ার্ক API-এর জন্য সমর্থন প্রয়োগ করে, তাহলে কী ব্যবস্থাপনার জন্য:
- [C-6-2] সঠিকভাবে ডাইস করতে হবে অর্থাৎ সঠিক মান প্রদান করতে হবে।
তবে এটিকে বিশদ স্তরে যেতে হবে না।
আগস্ট 15, 2022
2. ডিভাইসের ধরন
2.2.1 হার্ডওয়্যার : নিম্নরূপ হার্ডওয়্যার প্রয়োজনীয়তা পরিবর্তন.
ইনপুট ডিভাইস:
রিভিশন দেখুন
হ্যান্ডহেল্ড ডিভাইস বাস্তবায়ন:
- [ 7.2 .3/H-0-5] যখন পিছনের অঙ্গভঙ্গি শুরু হয় বা পিছনের বোতামটি (
KEYCODE_BACK
) চাপা হয় তখন বর্তমান ফোকাস করা উইন্ডোতেOnBackInvokedCallback.onBackStarted()
কল করতে হবে৷ - [ 7.2 .3/H-0-6] যখন পিছনের অঙ্গভঙ্গি প্রতিশ্রুতিবদ্ধ হয় বা ব্যাক বোতামটি প্রকাশ করা হয় (UP) তখন অবশ্যই
OnBackInvokedCallback.onBackInvoked()
কল করতে হবে৷ - [ 7.2 .3/H-0-7] যখন পিছনের অঙ্গভঙ্গি প্রতিশ্রুতিবদ্ধ না হয় বা
KEYCODE_BACK
ইভেন্ট বাতিল করা হয় তখন অবশ্যইOnBackInvokedCallback.onBackCancelled()
কল করতে হবে৷
PackageManager.FEATURE_WIFI_RTT
PackageManager.FEATURE_WIFI_AWARE
এবং Wi-Fi অবস্থান (Wi-Fi রাউন্ড ট্রিপ টাইম — RTT) ঘোষণা করে যদি ডিভাইসগুলি WiFi Neighbour Awareness Networking (NAN) প্রোটোকল সমর্থন করে, তাহলে তারা:[ 7.4 .2.5/H-1-1] 68 তম পার্সেন্টাইলে 160 MHz ব্যান্ডউইথের মধ্যে +/-1 মিটারের মধ্যে পরিসীমাটি সঠিকভাবে রিপোর্ট করতে হবে (ক্রমিক বন্টন ফাংশনের সাথে গণনা করা হয়েছে), 80 MHz ব্যান্ডউইথের +/-2 মিটার 68তম পার্সেন্টাইলে, 68তম পার্সেন্টাইলে 40 মেগাহার্টজ ব্যান্ডউইথের +/-4 মিটার এবং 20 মেগাহার্টজ ব্যান্ডউইথ-এ +/-8 মিটার 68 তম পার্সেন্টাইলে 10 সেমি, 1 মি, 3 মি, এবং 5 মিটার দূরত্বে WifiRttManager#startRanging Android API এর মাধ্যমে পর্যবেক্ষণ করা হয়েছে।
[ 7.4 .2.5/H-SR] 90 তম পার্সেন্টাইলে 160 মেগাহার্টজ ব্যান্ডউইথের মধ্যে +/-1 মিটারের মধ্যে পরিসীমা নির্ভুলভাবে রিপোর্ট করার জন্য দৃঢ়ভাবে সুপারিশ করা হয় (ক্রমিক বন্টন ফাংশন দ্বারা গণনা করা হয়), +/-2 মিটার 80 মেগাহার্টজ 90 তম পার্সেন্টাইলে ব্যান্ডউইথ, 90 তম পার্সেন্টাইলে 40 মেগাহার্টজ ব্যান্ডউইথের +/-4 মিটার এবং 10 সেমি দূরত্বে 90 তম পার্সেন্টাইলে 20 মেগাহার্টজ ব্যান্ডউইথ-এ +/-8 মিটার, যেমনটি WifiRttManager #startang API- এর মাধ্যমে পর্যবেক্ষণ করা হয়েছে।
উপস্থিতি ক্রমাঙ্কন প্রয়োজনীয়তাগুলিতে নির্দিষ্ট পরিমাপ সেটআপ পদক্ষেপগুলি অনুসরণ করার জন্য এটি দৃঢ়ভাবে সুপারিশ করা হয়৷
- [ 7.2 .3/H-0-5] যখন পিছনের অঙ্গভঙ্গি শুরু হয় বা পিছনের বোতামটি (
অডিও লেটেন্সি:
রিভিশন দেখুন
যদি হ্যান্ডহেল্ড ডিভাইস বাস্তবায়ন
android.hardware.audio.output
এবংandroid.hardware.microphone
ঘোষণা করে, তারা:- [ 5.6 /H-1-1] একটি গড় ক্রমাগত রাউন্ড-ট্রিপ লেটেন্সি 500 থাকতে হবে
800মিলিসেকেন্ড বা 5 এর বেশি পরিমাপ, গড় পরম বিচ্যুতি 50 এর কম100ms, নিম্নলিখিত ডেটা পাথগুলিতে: "স্পিকার থেকে মাইক্রোফোন", 3.5 মিমি লুপব্যাক অ্যাডাপ্টার (যদি সমর্থিত হয়), USB লুপব্যাক (যদি সমর্থিত হয়)৷অন্তত একটি সমর্থিত পথ।
- [ 5.6 /H-1-1] স্পীকার থেকে মাইক্রোফোন ডেটা পাথের উপর গড় ট্যাপ-টু-টোন লেটেন্সি 500 মিলিসেকেন্ড বা তার কম হতে হবে।
- [ 5.6 /H-1-1] একটি গড় ক্রমাগত রাউন্ড-ট্রিপ লেটেন্সি 500 থাকতে হবে
হ্যাপটিক ইনপুট:
রিভিশন দেখুন
যদি হ্যান্ডহেল্ড ডিভাইস বাস্তবায়নে কমপক্ষে একটি হ্যাপটিক অ্যাকুয়েটর অন্তর্ভুক্ত থাকে, তারা:
- [ 7.10 /H]* একটি উদ্ভট ঘূর্ণায়মান ভর (ERM) হ্যাপটিক অ্যাকচুয়েটর (ভাইব্রেটর) ব্যবহার করা উচিত নয়।
- [ 7.10 /H]* যেখানে ডিভাইসটি সাধারণত হাতে ধরে রাখা বা স্পর্শ করা হয় সেই অবস্থানের কাছাকাছি অ্যাকচুয়েটরের স্থাপন করা উচিত।
- [ 7.10 /h]* অ্যান্ড্রয়েড.ভিউ.হ্যাপটিকফিডব্যাককনস্ট্যান্টস (ক্লক_টিক, প্রসঙ্গ_ক্লিক, কীবোর্ড_প্রেস, কীবোর্ড_প্রেস, কীবোর্ড_ট্যাপ, লং_প্রেস, টেক্সট_হ্যান্ডল_কি, ভার্চুয়াল_কি_কিউইআরইজিইআরইজ, গেস্ট, গেস্ট, গেস্ট, গেস্ট, গেস্ট, গেস্ট, গেস্টে সমস্ত পাবলিক কনস্ট্যান্টগুলি প্রয়োগ করা উচিত।
- [ 7.10 /H]* android.os.VibrationEffect- এ স্পষ্ট হ্যাপটিক্সের জন্য সমস্ত পাবলিক কনস্ট্যান্ট প্রয়োগ করা উচিত, যথা (EFFECT_TICK, EFFECT_CLICK, EFFECT_HEAVY_CLICK এবং EFFECT_DOUBLE_CLICK) এবং Android এর জন্য সম্ভাব্য সকল পাবলিক কনস্ট্যান্টস -এর জন্য
PRIMITIVE_*
রিচের নাম।(PRIMITIVE_CLICK এবং PRIMITIVE_TICK)(CLICK, TICK, LOW_TICK, QUICK_FALL, QUICK_RISE, SLOW_RISE, SPIN, THUD)। এর মধ্যে কিছু আদিম, যেমন LOW_TICK এবং SPIN শুধুমাত্র তখনই সম্ভব হতে পারে যদি ভাইব্রেটর তুলনামূলকভাবে কম ফ্রিকোয়েন্সি সমর্থন করতে পারে।
- [7.10/H]* android.view.HapticFeedback Constants-এ android.os.VibrationEffect ধ্রুবকগুলির সাথে সংশ্লিষ্ট প্রশস্ততা সম্পর্কগুলির সাথে ম্যাপ করার নির্দেশিকা অনুসরণ করা উচিত৷
- [ 7.10 /H]* সর্বজনীন android.os.Vibrator.hasAmplitudeControl() API-এর ফলাফল তাদের ভাইব্রেটরের ক্ষমতা সঠিকভাবে প্রতিফলিত করে তা যাচাই করা উচিত।
- [ 7.10 /H]* android.os.Vibrator.hasAmplitudeControl() চালানোর মাধ্যমে প্রশস্ততা পরিমাপযোগ্যতার ক্ষমতা যাচাই করা উচিত।
যদি হ্যান্ডহেল্ড ডিভাইস বাস্তবায়নে কমপক্ষে একটি লিনিয়ার রেজোন্যান্ট অ্যাকচুয়েটর অন্তর্ভুক্ত থাকে, তারা:
[ 7.10 /H]* পোর্ট্রেট ওরিয়েন্টেশনের X-অক্ষে (বাম-ডান) হ্যাপটিক অ্যাকুয়েটরকে সরানো উচিত।
[ 7.10 /H]* যদি ধ্রুবকের জন্য বাস্তবায়ন নির্দেশিকাতে বর্ণিত অসমর্থিত আদিমগুলির জন্য ফলব্যাক কনফিগারেশনের প্রয়োজন হয় তবে যাচাই এবং আপডেট করা উচিত।
[7.10/H]* এখানে বর্ণিত হিসাবে ব্যর্থতার ঝুঁকি কমাতে ফলব্যাক সমর্থন প্রদান করা উচিত।
অথ তুচ্ছ ডিভাইস কন্ট্রোল:
রিভিশন দেখুন
- [ 3.8 .16/H-1-5]
ControlsProviderService
এবংControl
Control.isAuthRequired
API-এর মাধ্যমে তৃতীয় পক্ষের অ্যাপ্লিকেশনগুলির দ্বারা নিবন্ধিত নিয়ন্ত্রণগুলি থেকে অ্যাপ মনোনীত প্রমাণ-তুচ্ছ ডিভাইস নিয়ন্ত্রণগুলি থেকে অপ্ট আউট করার জন্য ব্যবহারকারীকে অবশ্যই সামর্থ্য প্রদান করতে হবে৷
- [ 3.8 .16/H-1-5]
মিডিয়া স্টাইল বিজ্ঞপ্তি:
রিভিশন দেখুন
যদি হ্যান্ডহেল্ড ডিভাইস বাস্তবায়ন MediaStyle বিজ্ঞপ্তি সমর্থন করে তারা:
- [3.8.3.1/H-1-SR] সিস্টেম UI থেকে অ্যাক্সেস করা একটি ব্যবহারকারীর সামর্থ্য (যেমন "আউটপুট সুইচার") প্রদান করার জন্য দৃঢ়ভাবে সুপারিশ করা হয় যা ব্যবহারকারীদের উপযুক্ত উপলব্ধ মিডিয়া রুটগুলির মধ্যে পরিবর্তন করতে দেয় (যেমন ব্লুটুথ ডিভাইস এবং MediaRouter2Manager এ প্রদত্ত রুট) যখন একটি অ্যাপ একটি MediaSession টোকেন সহ একটি MediaStyle বিজ্ঞপ্তি পোস্ট করে।
2.2.4 পারফরম্যান্স এবং পাওয়ার : ফোরগ্রাউন্ড পরিষেবাগুলি চালায় এমন অ্যাপগুলির জন্য নতুন প্রয়োজনীয়তা৷
রিভিশন দেখুন
হ্যান্ডহেল্ড ডিভাইস বাস্তবায়ন:
- [ 8.5 /H-0-1] সেটিংস মেনুতে একটি ফোরগ্রাউন্ড পরিষেবা চালাচ্ছে এমন একটি অ্যাপ বন্ধ করার ক্ষমতা এবং সক্রিয় ফোরগ্রাউন্ড পরিষেবা রয়েছে এমন সমস্ত অ্যাপ এবং এর পর থেকে এই পরিষেবাগুলির প্রতিটির সময়কাল প্রদর্শন করার ক্ষমতা সহ ব্যবহারকারীর সামর্থ্য প্রদান করতে হবে SDK নথিতে বর্ণিত হিসাবে শুরু হয়েছে৷
- কিছু অ্যাপ SDK নথিতে বর্ণিত ব্যবহারকারীর সামর্থ্য অনুযায়ী বন্ধ হওয়া বা তালিকাভুক্ত হওয়া থেকে অব্যাহতি পেতে পারে।
- [ 8.5 /H-0-1] সেটিংস মেনুতে একটি ফোরগ্রাউন্ড পরিষেবা চালাচ্ছে এমন একটি অ্যাপ বন্ধ করার ক্ষমতা এবং সক্রিয় ফোরগ্রাউন্ড পরিষেবা রয়েছে এমন সমস্ত অ্যাপ এবং এর পর থেকে এই পরিষেবাগুলির প্রতিটির সময়কাল প্রদর্শন করার ক্ষমতা সহ ব্যবহারকারীর সামর্থ্য প্রদান করতে হবে SDK নথিতে বর্ণিত হিসাবে শুরু হয়েছে৷
2.2.7.1 মিডিয়া : হ্যান্ডহেল্ড প্রয়োজনীয় মিডিয়া বিভাগে আপডেটগুলি নিম্নরূপ:
রিভিশন দেখুন
যদি হ্যান্ডহেল্ড ডিভাইস বাস্তবায়ন
android.os.Build.VERSION_CODES.T
android.os.Build.VERSION_CODES.MEDIA_PERFORMANCE_CLASS
দেয়, তাহলে তারা:- [5.1/H-1-1] সর্বাধিক সংখ্যক হার্ডওয়্যার ভিডিও ডিকোডার সেশনের বিজ্ঞাপন দিতে হবে যা
CodecCapabilities.getMaxSupportedInstances()
এবংVideoCapabilities.getSupportedPerformancePoints()
পদ্ধতির মাধ্যমে যেকোন কোডেক সংমিশ্রণে একযোগে চালানো যেতে পারে। - [5.1/H-1-2] হার্ডওয়্যার ভিডিও ডিকোডার সেশনের (AVC, HEVC, VP9, AV1 বা পরবর্তী) 6টি দৃষ্টান্তকে সমর্থন করতে হবে যেকোন কোডেক সংমিশ্রণে 1080p রেজোলিউশন@30 fps এ একই সাথে চলমান।
- [5.1/H-1-3] সর্বাধিক সংখ্যক হার্ডওয়্যার ভিডিও এনকোডার সেশনের বিজ্ঞাপন দিতে হবে যা
CodecCapabilities.getMaxSupportedInstances()
এবংVideoCapabilities.getSupportedPerformancePoints()
পদ্ধতির মাধ্যমে যেকোন কোডেক সংমিশ্রণে একযোগে চালানো যেতে পারে। - [5.1/H-1-4] হার্ডওয়্যার ভিডিও এনকোডার সেশনের (AVC, HEVC, VP9, AV1 বা পরবর্তী) 6টি দৃষ্টান্ত সমর্থন করতে হবে যেকোন কোডেক সংমিশ্রণে 1080p রেজোলিউশন@30fps-এ একযোগে চলমান।
- [5.1/H-1-5] অবশ্যই সর্বাধিক সংখ্যক হার্ডওয়্যার ভিডিও এনকোডার এবং ডিকোডার সেশনের বিজ্ঞাপন দিতে হবে যা
CodecCapabilities.getMaxSupportedInstances()
এবংVideoCapabilities.getSupportedPerformancePoints()
পদ্ধতির মাধ্যমে যেকোন কোডেক সংমিশ্রণে একযোগে চালানো যেতে পারে। - [5.1/H-1-6] 1080p@30fps রেজোলিউশনে যেকোন কোডেক সংমিশ্রণে হার্ডওয়্যার ভিডিও ডিকোডার এবং হার্ডওয়্যার ভিডিও এনকোডার সেশনের (AVC, HEVC, VP9, AV1 বা পরবর্তী) 6টি দৃষ্টান্ত সমর্থন করতে হবে।
- [5.1/H-1-7] লোডের অধীনে থাকা সমস্ত হার্ডওয়্যার ভিডিও এনকোডারগুলির জন্য একটি 1080p বা ছোট ভিডিও এনকোডিং সেশনের জন্য 40 ms বা তার কম কোডেক ইনিশিয়ালাইজেশন লেটেন্সি থাকা আবশ্যক৷ এখানে লোডকে 1080p অডিও-ভিডিও রেকর্ডিং ইনিশিয়ালাইজেশনের সাথে হার্ডওয়্যার ভিডিও কোডেক ব্যবহার করে একটি সমবর্তী 1080p থেকে 720p ভিডিও-শুধুমাত্র ভিডিও ট্রান্সকোডিং সেশন হিসাবে সংজ্ঞায়িত করা হয়েছে।
- [5.1/H-1-8] লোডের অধীনে থাকাকালীন সমস্ত অডিও এনকোডারের জন্য 128 kbps বা নিম্ন বিটরেট অডিও এনকোডিং সেশনের জন্য 30 ms বা তার কম কোডেক ইনিশিয়ালাইজেশন লেটেন্সি থাকতে হবে। এখানে লোডকে 1080p অডিও-ভিডিও রেকর্ডিং ইনিশিয়ালাইজেশনের সাথে হার্ডওয়্যার ভিডিও কোডেক ব্যবহার করে একটি সমবর্তী 1080p থেকে 720p ভিডিও-শুধুমাত্র ভিডিও ট্রান্সকোডিং সেশন হিসাবে সংজ্ঞায়িত করা হয়েছে।
- [5.1/H-1-9] 1080p রেজোলিউশন@30 fps এ একযোগে চলমান যেকোনো কোডেক সংমিশ্রণে সুরক্ষিত হার্ডওয়্যার ভিডিও ডিকোডার সেশনের (AVC, HEVC, VP9, AV1 বা পরবর্তী) 2টি দৃষ্টান্ত সমর্থন করতে হবে।
- [5.1/H-1-10] যেকোন কোডেকে নিরাপদ হার্ডওয়্যার ভিডিও ডিকোডার সেশনের 1টি (মোট 4টি দৃষ্টান্ত) (AVC, HEVC, VP9, AV1 বা পরবর্তী) সহ অ-সুরক্ষিত হার্ডওয়্যার ভিডিও ডিকোডার সেশনের 3টি দৃষ্টান্ত সমর্থন করতে হবে সমন্বয় 1080p রেজোলিউশন@30fps এ একই সাথে চলছে।
- [5.1/ H-1-11] ডিভাইসে প্রতিটি হার্ডওয়্যার AVC, HEVC, VP9 বা AV1 ডিকোডারের জন্য একটি সুরক্ষিত ডিকোডার সমর্থন করতে হবে।
- [5.1/H-1-12] একটি ভিডিও ডিকোডার ইনিশিয়ালাইজেশন লেটেন্সি অবশ্যই 40 ms বা তার কম।
- [5.1/H-1-13] 30 ms বা তার কম একটি অডিও ডিকোডার ইনিশিয়ালাইজেশন লেটেন্সি থাকতে হবে।
- [5.1/H-1-14] AV1 হার্ডওয়্যার ডিকোডার প্রধান 10, স্তর 4.1 সমর্থন করতে হবে।
- [5.1/H-SR] AV1 হার্ডওয়্যার ডিকোডারের জন্য ফিল্ম গ্রেইনকে সমর্থন করার জন্য দৃঢ়ভাবে সুপারিশ করা হয়।
- [5.1/H-1-15] 4K60 সমর্থনকারী কমপক্ষে 1টি হার্ডওয়্যার ভিডিও ডিকোডার থাকতে হবে।
- [5.1/H-1-16] 4K60 সমর্থনকারী কমপক্ষে 1টি হার্ডওয়্যার ভিডিও এনকোডার থাকতে হবে।
- [5.3/H-1-1] লোডের অধীনে একটি 1080p 60 fps ভিডিও সেশনের জন্য 10 সেকেন্ডে (অর্থাৎ 0.167 শতাংশের কম ফ্রেম ড্রপ) 1 ফ্রেমের বেশি ড্রপ করা উচিত নয়৷ লোডকে হার্ডওয়্যার ভিডিও কোডেক ব্যবহার করে 1080p থেকে 720p ভিডিও-শুধুমাত্র ভিডিও ট্রান্সকোডিং সেশন হিসাবে সংজ্ঞায়িত করা হয়েছে, সেইসাথে একটি 128 kbps AAC অডিও প্লেব্যাক।
- [5.3/H-1-2] লোডের অধীনে 60 fps ভিডিও সেশনে ভিডিও রেজোলিউশন পরিবর্তনের সময় 10 সেকেন্ডে 1 ফ্রেমের বেশি ড্রপ করা উচিত নয়। লোডকে হার্ডওয়্যার ভিডিও কোডেক ব্যবহার করে 1080p থেকে 720p ভিডিও-শুধুমাত্র ভিডিও ট্রান্সকোডিং সেশন হিসাবে সংজ্ঞায়িত করা হয়েছে, সেইসাথে একটি 128 kbps AAC অডিও প্লেব্যাক।
- [5.6/H-1-1] OboeTester ট্যাপ-টু-টোন টেস্ট বা CTS ভেরিফায়ার ট্যাপ-টু-টোন টেস্ট ব্যবহার করে 80 মিলিসেকেন্ড বা তার কম ট্যাপ-টু-টোন লেটেন্সি থাকতে হবে।
- [5.6/H-1-2] একটি রাউন্ড-ট্রিপ অডিও লেটেন্সি 80 মিলিসেকেন্ড বা অন্তত একটি সমর্থিত ডেটা পাথের বেশি হতে হবে।
- [5.6/H-1-3] কম লেটেন্সি এবং স্ট্রিমিং কনফিগারেশনের জন্য সম্পূর্ণ ডাটা পাথের মাধ্যমে সমর্থিত হলে 3.5 মিমি অডিও জ্যাক এবং USB অডিওর উপরে থাকলে স্টিরিও আউটপুটের জন্য >=24-বিট অডিও সমর্থন করতে হবে। কম লেটেন্সি কনফিগারেশনের জন্য, AAudio অ্যাপটিকে লো-লেটেন্সি কলব্যাক মোডে ব্যবহার করা উচিত। স্ট্রিমিং কনফিগারেশনের জন্য, অ্যাপটির দ্বারা একটি জাভা অডিওট্র্যাক ব্যবহার করা উচিত। লো লেটেন্সি এবং স্ট্রিমিং কনফিগারেশন উভয় ক্ষেত্রেই, HAL আউটপুট সিঙ্কের হয়
AUDIO_FORMAT_PCM_24_BIT
,AUDIO_FORMAT_PCM_24_BIT_PACKED
,AUDIO_FORMAT_PCM_32_BIT
বাAUDIO_FORMAT_PCM_FLOAT
এর লক্ষ্যমাত্রা আউটপুট করার জন্য গ্রহণ করা উচিত। - [5.6/H-1-4] সমর্থন করা আবশ্যক >=4 চ্যানেল ইউএসবি অডিও ডিভাইস (এটি গানের পূর্বরূপ দেখার জন্য ডিজে কন্ট্রোলার দ্বারা ব্যবহৃত হয়।)
- [5.6/H-1-5] ক্লাস কমপ্লায়েন্ট MIDI ডিভাইসগুলিকে সমর্থন করতে হবে এবং MIDI বৈশিষ্ট্য পতাকা ঘোষণা করতে হবে।
- [5.7/H-1-2] নীচের বিষয়বস্তু ডিক্রিপশন ক্ষমতা সহ
MediaDrm.SECURITY_LEVEL_HW_SECURE_ALL
সমর্থন করতে হবে।
ন্যূনতম নমুনার আকার 4 MiB সাবস্যাম্পলের ন্যূনতম সংখ্যা - H264 বা HEVC 32 ন্যূনতম সাব নমুনার সংখ্যা - VP9 9 ন্যূনতম সাবস্যাম্পেল সংখ্যা - AV1 288 ন্যূনতম সাবস্যাম্পল বাফার সাইজ 1 MiB ন্যূনতম জেনেরিক ক্রিপ্টো বাফার আকার 500 KiB সমবর্তী সেশনের ন্যূনতম সংখ্যা 30 প্রতি সেশনে কীগুলির ন্যূনতম সংখ্যা 20 ন্যূনতম মোট কী সংখ্যা (সমস্ত সেশন) 80 DRM কীগুলির ন্যূনতম মোট সংখ্যা (সমস্ত সেশন) 6 বার্তার আকার 16 কিবি প্রতি সেকেন্ডে ডিক্রিপ্ট করা ফ্রেম 60 FPS - [5.1/H-1-1] সর্বাধিক সংখ্যক হার্ডওয়্যার ভিডিও ডিকোডার সেশনের বিজ্ঞাপন দিতে হবে যা
2.2.7.2 ক্যামেরা : মিডিয়া পারফরম্যান্স ক্লাস ক্যামেরার প্রয়োজনীয়তার আপডেট।
রিভিশন দেখুন
যদি হ্যান্ডহেল্ড ডিভাইস বাস্তবায়ন
android.os.Build.VERSION_CODES.T
android.os.Build.VERSION_CODES.MEDIA_PERFORMANCE_CLASS
দেয়, তাহলে তারা:- [7.5/H-1-1] 4k@30fps এ ভিডিও ক্যাপচার সমর্থনকারী কমপক্ষে 12 মেগাপিক্সেলের রেজোলিউশন সহ একটি প্রাইমারি রিয়ার ফেসিং ক্যামেরা থাকতে হবে। প্রাইমারি রিয়ার-ফেসিং ক্যামেরা হল সবচেয়ে কম ক্যামেরা আইডি সহ রিয়ার-ফেসিং ক্যামেরা।
- [7.5/H-1-2] কমপক্ষে 5 মেগাপিক্সেলের রেজোলিউশন সহ একটি প্রাথমিক ফ্রন্ট ফেসিং ক্যামেরা থাকতে হবে এবং 1080p@30fps এ ভিডিও ক্যাপচার সমর্থন করে। প্রাইমারি ফ্রন্ট-ফেসিং ক্যামেরা হল ফ্রন্ট-ফেসিং ক্যামেরা যার সর্বনিম্ন ক্যামেরা আইডি।
- [7.5/H-1-3] উভয় প্রাথমিক ক্যামেরার জন্য
android.info.supportedHardwareLevel
প্রপার্টিFULL
বা ভাল হিসাবে সমর্থন করতে হবে। - [7.5/H-1-4]
CameraMetadata.SENSOR_INFO_TIMESTAMP_SOURCE_REALTIME
সমর্থন করতে হবে। উভয় প্রাথমিক ক্যামেরার জন্য SENSOR_INFO_TIMESTAMP_SOURCE_REALTIME। - [7.5/H-1-5] উভয় প্রাথমিক ক্যামেরার জন্য ITS আলোর অবস্থার (3000K) অধীনে CTS ক্যামেরা পারফরম্যান্স টেস্ট দ্বারা পরিমাপ করা 1080p রেজোলিউশনের জন্য ক্যামেরা2 JPEG ক্যাপচার লেটেন্সি < 1000 ms থাকতে হবে।
- [7.5/H-1-6] ক্যামেরা2 স্টার্টআপ লেটেন্সি থাকতে হবে (প্রথম প্রিভিউ ফ্রেমে ক্যামেরা খুলুন) < 500 ms যেমন CTS ক্যামেরা পারফরম্যান্স টেস্ট দ্বারা পরিমাপ করা হয়েছে ITS আলোর অবস্থার অধীনে (3000K) উভয় প্রাথমিক ক্যামেরার জন্য।
- [7.5/H-1-8] প্রাইমারি ব্যাক ক্যামেরার জন্য অবশ্যই
CameraMetadata.REQUEST_AVAILABLE_CAPABILITIES_RAW
এবংandroid.graphics.ImageFormat.RAW_SENSOR
সমর্থন করতে হবে। - [7.5/H-1-9] 720p বা 1080p @ 240fps সমর্থনকারী একটি পিছনের মুখী প্রাথমিক ক্যামেরা থাকতে হবে।
- [7.5/H-1-10] প্রাথমিক ক্যামেরাগুলির জন্য ন্যূনতম ZOOM_RATIO < 1.0 থাকতে হবে যদি একই দিকে মুখ করে একটি আল্ট্রাওয়াইড RGB ক্যামেরা থাকে।
- [7.5/H-1-11] প্রাথমিক ক্যামেরাগুলিতে সমসাময়িক ফ্রন্ট-ব্যাক স্ট্রিমিং প্রয়োগ করতে হবে।
- [7.5/H-1-12] প্রাইমারি ফ্রন্ট এবং প্রাইমারি ব্যাক ক্যামেরা উভয়ের জন্য
CONTROL_VIDEO_STABILIZATION_MODE_PREVIEW_STABILIZATION
সমর্থন করতে হবে। - [7.5/H-1-13] যদি একই দিকের দিকে 1টির বেশি RGB ক্যামেরা থাকে তবে প্রাথমিক ক্যামেরাগুলির জন্য
LOGICAL_MULTI_CAMERA
সক্ষমতা অবশ্যই সমর্থন করবে৷ - [7.5/H-1-14] প্রাইমারি ফ্রন্ট এবং প্রাইমারি ব্যাক ক্যামেরা উভয়ের জন্যই
STREAM_USE_CASE
ক্ষমতা সমর্থন করতে হবে।
2.2.7.3 হার্ডওয়্যার : হার্ডওয়্যারের জন্য মিডিয়া পারফরম্যান্স ক্লাসের প্রয়োজনীয়তার আপডেট।
রিভিশন দেখুন
যদি হ্যান্ডহেল্ড ডিভাইস বাস্তবায়ন
android.os.Build.VERSION_CODES.T
android.os.Build.VERSION_CODES.MEDIA_PERFORMANCE_CLASS
দেয়, তাহলে তারা:- [7.1.1.1/H-2-1] কমপক্ষে 1080p এর স্ক্রিন রেজোলিউশন থাকতে হবে।
- [7.1.1.3/H-2-1] কমপক্ষে 400 dpi এর পর্দার ঘনত্ব থাকতে হবে।
- [7.6.1/H-2-1] কমপক্ষে 8 জিবি শারীরিক মেমরি থাকতে হবে।
2.2.7.4 পারফরম্যান্স : পারফরম্যান্সের জন্য মিডিয়া পারফরম্যান্স ক্লাসের আপডেট।
রিভিশন দেখুন
যদি হ্যান্ডহেল্ড ডিভাইস বাস্তবায়ন
android.os.Build.VERSION_CODES.T
android.os.Build.VERSION_CODES.MEDIA_PERFORMANCE_CLASS
দেয়, তাহলে তারা:- [8.2/H-1-1] কমপক্ষে 125 MB/s এর একটি ক্রমিক লেখার কার্যক্ষমতা নিশ্চিত করতে হবে।
- [8.2/H-1-2] কমপক্ষে 10 এমবি/সেকেন্ডের একটি র্যান্ডম রাইটিং পারফরম্যান্স নিশ্চিত করতে হবে।
- [8.2/H-1-3] কমপক্ষে 250 MB/s এর একটি অনুক্রমিক পঠন কর্মক্ষমতা নিশ্চিত করতে হবে।
- [8.2/H-1-4] কমপক্ষে 40 MB/s এর র্যান্ডম রিড পারফরম্যান্স নিশ্চিত করতে হবে।
2.5.1 হার্ডওয়্যার : 3-অক্ষের অ্যাক্সিলোমিটার এবং 3-অক্ষের জাইরোস্কোপের প্রয়োজনীয়তার পাশাপাশি বাহ্যিক-ভিউ ক্যামেরার প্রয়োজনীয়তার আপডেট।
রিভিশন দেখুন
স্বয়ংচালিত ডিভাইস বাস্তবায়ন:
- [ 7.3 .1/A-0-4] অবশ্যই অ্যান্ড্রয়েড কার সেন্সর সমন্বয় সিস্টেম মেনে চলতে হবে।
- [ 7.3 /A-SR] একটি 3-অক্ষ অ্যাক্সিলোমিটার এবং 3-অক্ষের জাইরোস্কোপ অন্তর্ভুক্ত করার জন্য দৃঢ়ভাবে_প্রস্তাবিত।
- [ 7.3 /A-SR]
TYPE_HEADING
সেন্সর বাস্তবায়ন এবং রিপোর্ট করার জন্য দৃঢ়ভাবে_প্রস্তাবিত।
যদি স্বয়ংচালিত ডিভাইস বাস্তবায়নে একটি অ্যাক্সিলোমিটার অন্তর্ভুক্ত থাকে, তারা:
- [ 7.3 .1/A-1-1] কমপক্ষে 100 Hz ফ্রিকোয়েন্সি পর্যন্ত ইভেন্ট রিপোর্ট করতে সক্ষম হতে হবে।
যদি ডিভাইস বাস্তবায়নে একটি 3-অক্ষ অ্যাক্সিলোমিটার অন্তর্ভুক্ত থাকে, তারা:
- [ 7.3 .1/A-SR] সীমিত অক্ষের অ্যাক্সিলোমিটারের জন্য যৌগিক সেন্সর প্রয়োগ করার জন্য দৃঢ়ভাবে সুপারিশ করা হয়।
যদি স্বয়ংচালিত ডিভাইস বাস্তবায়নে 3টির কম অক্ষ সহ একটি অ্যাক্সিলোমিটার অন্তর্ভুক্ত থাকে, তারা:
- [ 7.3 .1/A-1-3]
TYPE_ACCELEROMETER_LIMITED_AXES
সেন্সর অবশ্যই বাস্তবায়ন এবং রিপোর্ট করতে হবে৷ - [ 7.3 .1/A-1-4]
TYPE_ACCELEROMETER_LIMITED_AXES_UNCALIBRATED
সেন্সর বাস্তবায়ন এবং রিপোর্ট করতে হবে৷
যদি স্বয়ংচালিত ডিভাইস বাস্তবায়নে একটি জাইরোস্কোপ অন্তর্ভুক্ত থাকে, তারা:
- [ 7.3 .4/A-2-1] কমপক্ষে 100 Hz ফ্রিকোয়েন্সি পর্যন্ত ইভেন্ট রিপোর্ট করতে সক্ষম হতে হবে।
- [ 7.3 .4/A-2-3] প্রতি সেকেন্ডে 250 ডিগ্রি পর্যন্ত অভিযোজন পরিবর্তন পরিমাপ করতে সক্ষম হতে হবে।
- [ 7.3 .4/A-SR] সম্ভাব্য রেজোলিউশন সর্বাধিক করার জন্য জাইরোস্কোপের পরিমাপ পরিসীমা +/-250dps-এ কনফিগার করার জন্য দৃঢ়ভাবে সুপারিশ করা হয়।
যদি স্বয়ংচালিত ডিভাইস বাস্তবায়নে একটি 3-অক্ষ জাইরোস্কোপ অন্তর্ভুক্ত থাকে, তারা:
- [ 7.3 .4/A-SR] সীমিত অক্ষের জাইরোস্কোপের জন্য যৌগিক সেন্সর প্রয়োগ করার জন্য দৃঢ়ভাবে সুপারিশ করা হয়।
যদি স্বয়ংচালিত ডিভাইস বাস্তবায়নে 3-অক্ষের কম সহ একটি জাইরোস্কোপ অন্তর্ভুক্ত থাকে, তারা:
- [ 7.3 .4/A-4-1]
TYPE_GYROSCOPE_LIMITED_AXES
সেন্সর অবশ্যই বাস্তবায়ন এবং রিপোর্ট করতে হবে। - [ 7.3 .4/A-4-2]
TYPE_GYROSCOPE_LIMITED_AXES_UNCALIBRATED
সেন্সর বাস্তবায়ন এবং রিপোর্ট করতে হবে।
যদি স্বয়ংচালিত ডিভাইস বাস্তবায়নে একটি
TYPE_HEADING
সেন্সর অন্তর্ভুক্ত থাকে, তারা:একটি বাহ্যিক দৃশ্য ক্যামেরা হল একটি ক্যামেরা যা ডিভাইস বাস্তবায়নের বাইরের দৃশ্যগুলিকে চিত্রিত করে, যেমন রিয়ারভিউ ক্যামেরা
একটি ড্যাশক্যাম.যদি স্বয়ংচালিত ডিভাইস বাস্তবায়নে একটি বহিরাগত ভিউ ক্যামেরা অন্তর্ভুক্ত থাকে, এই ধরনের ক্যামেরার জন্য, তারা:
[ 7.5 .5/A-SR] ক্যামেরার লম্বা ডাইমেনশন দিগন্তের সাথে সারিবদ্ধ হওয়ার জন্য দৃঢ়ভাবে সুপারিশ করা হয়।অ্যান্ড্রয়েড সিঙ্ক্রোনাইজেশন ফ্রেমওয়ার্ক সমর্থন করা উচিত।ক্যামেরা ড্রাইভারে হার্ডওয়্যার অটো-ফোকাস বা সফ্টওয়্যার অটো-ফোকাস লাগানো থাকতে পারে।
যদি স্বয়ংচালিত ডিভাইস বাস্তবায়নে এক বা একাধিক বাহ্যিক ভিউ ক্যামেরা এবং লোড এক্সটেরিয়র ভিউ সিস্টেম (EVS) পরিষেবা অন্তর্ভুক্ত থাকে, তাহলে এই ধরনের ক্যামেরার জন্য, তারা:
- [ 7.5 /A-2-1] ক্যামেরা প্রিভিউ ঘোরানো বা অনুভূমিকভাবে মিরর করা উচিত নয়।
স্বয়ংচালিত ডিভাইস বাস্তবায়ন:
- তৃতীয় পক্ষের অ্যাপ্লিকেশনগুলিতে উপলব্ধ এক বা একাধিক ক্যামেরা অন্তর্ভুক্ত হতে পারে৷
যদি স্বয়ংচালিত ডিভাইস বাস্তবায়নে কমপক্ষে একটি ক্যামেরা থাকে এবং এটি তৃতীয় পক্ষের অ্যাপ্লিকেশনগুলিতে উপলব্ধ করা হয়, তাহলে তারা:
- [ 7.5 /A-3-1] ফিচার ফ্ল্যাগ
android.hardware.camera.any
রিপোর্ট করতে হবে। - [ 7.5 /A-3-2] ক্যামেরাটিকে সিস্টেম ক্যামেরা হিসাবে ঘোষণা করা উচিত নয়।
- বিভাগ 7.5.3 এ বর্ণিত বহিরাগত ক্যামেরা সমর্থন করতে পারে।
- অনুচ্ছেদ 7.5.1- এ বর্ণিত রিয়ার-ফেসিং ক্যামেরাগুলিতে উপলব্ধ বৈশিষ্ট্যগুলি (যেমন অটো-ফোকাস, ইত্যাদি) অন্তর্ভুক্ত থাকতে পারে৷
2.5.5 নিরাপত্তা মডেল : স্বয়ংচালিত ডিভাইসের জন্য ক্যামেরা অনুমতির জন্য নতুন প্রয়োজনীয়তা।
রিভিশন দেখুন
যদি স্বয়ংচালিত ডিভাইস বাস্তবায়ন
android.hardware.camera.any
ঘোষণা করে, তাহলে তারা:[ 9.8.2 /A-2-1] যখন কোনও অ্যাপ লাইভ ক্যামেরা ডেটা অ্যাক্সেস করে তখন অবশ্যই ক্যামেরা সূচকটি প্রদর্শন করতে হবে, কিন্তু যখন CDD সহ সেকশন 9.1 অনুমতিতে বলা ভূমিকা ধারণ করে শুধুমাত্র অ্যাপ(গুলি) দ্বারা ক্যামেরা অ্যাক্সেস করা হচ্ছে তখন নয় শনাক্তকারী [C-3-X]।
[ 9.8.2 /A-2-2] দৃশ্যমান ব্যবহারকারী ইন্টারফেস বা সরাসরি ব্যবহারকারীর মিথস্ক্রিয়া আছে এমন সিস্টেম অ্যাপগুলির জন্য ক্যামেরা সূচক লুকানো উচিত নয়৷
2.6.1 ট্যাবলেট প্রয়োজনীয়তা — হার্ডওয়্যার : ট্যাবলেট স্ক্রীন আকারের প্রয়োজনীয়তা আপডেট করুন।
রিভিশন দেখুন
একটি Android ট্যাবলেট ডিভাইস একটি Android ডিভাইস বাস্তবায়নকে বোঝায় যা সাধারণত নিম্নলিখিত সমস্ত মানদণ্ড পূরণ করে:
- একটি স্ক্রীন ডিসপ্লে আকার 7" এর চেয়ে বেশি এবং 18 এর কম", তির্যকভাবে পরিমাপ করা হয়েছে৷
পর্দার আকার
- [ 7.1 .1.1/Tab-0-1] 7 থেকে 18 ইঞ্চি রেঞ্জের মধ্যে একটি স্ক্রিন থাকা আবশ্যক৷
3. সফটওয়্যার
3.2.2 বিল্ড প্যারামিটার :
getSerial()
এ ASCII অক্ষর আপডেট করা হয়েছে।রিভিশন দেখুন
- [C-0-1] ডিভাইস বাস্তবায়ন জুড়ে সামঞ্জস্যপূর্ণ, অর্থপূর্ণ মান প্রদান করার জন্য, নীচের সারণীতে এই মানগুলির ফর্ম্যাটগুলির উপর অতিরিক্ত বিধিনিষেধ অন্তর্ভুক্ত করা হয়েছে যা ডিভাইস বাস্তবায়নগুলিকে মেনে চলতে হবে৷
প্যারামিটার বিস্তারিত getSerial() একটি হার্ডওয়্যার সিরিয়াল নম্বর অবশ্যই (হতে বা ফেরত দিতে হবে), যা অবশ্যই একই মডেল এবং নির্মাতার ডিভাইস জুড়ে উপলব্ধ এবং অনন্য হতে হবে। The value of this field MUST be encodable as 7-bit ASCII and match the regular expression “^[a-zA-Z0-9]+$” . 3.2.3.5 Conditional Application Intents : Update to requirements for conditional application intents.
See revision
If device implementations include a large display (generally having display width and height of 600dp+) and supports split functionality , then they:
- [C-17-1] MUST have an activity that handles the Settings#ACTION_SETTINGS_EMBED_DEEP_LINK_ACTIVITY intent when split functionality is on. The Activity MUST be protected by
android.permission.LAUNCH_MULTI_PANE_SETTINGS_DEEP_LINK
and it MUST start the activity of the Intent parsed from Settings#EXTRA_SETTINGS_EMBEDDED_DEEP_LINK_INTENT_URI .
- [C-17-1] MUST have an activity that handles the Settings#ACTION_SETTINGS_EMBED_DEEP_LINK_ACTIVITY intent when split functionality is on. The Activity MUST be protected by
3.5.1 Application Restriction : Updates to application restrictions.
See revision
If device implementations implement a proprietary mechanism to restrict apps (eg changing or restricting API behaviors that are described in the SDK) and that mechanism is more restrictive than the Restricted App Standby Bucket , they:
- [C-1-1] MUST allow the user to see the list of restricted apps.
- [C-1-2] MUST provide user affordance to turn on / off all of these proprietary restrictions on each app.
- [C-1-3] MUST not automatically apply these proprietary restrictions without evidence of poor system health behavior, but MAY apply the restrictions on apps upon detection of poor system health behavior like stuck wakelocks, long running services, and other criteria. The criteria MAY be determined by device implementers but MUST be related to the app's impact on the system health. Other criteria that are not purely related to the system health, such as the app's lack of popularity in the market, MUST NOT be used as criteria.
- [C-1-4] MUST not automatically apply these proprietary restrictions for apps when a user has turned off app restrictions manually, and MAY suggest the user to apply these proprietary restrictions.
[C-1-5] MUST inform users if these proprietary restrictions are applied to an app automatically. Such information MUST be provided in the 24-hour period preceding the application of these proprietary restrictions.
[C-1-6] MUST return true for the ActivityManager.isBackgroundRestricted() method for any API calls from an app.
[C-1-7] MUST NOT restrict the top foreground app that is explicitly used by the user.
[C-1-8] MUST suspend these proprietary restrictions on an app whenever a user starts to explicitly use the app, making it the top foreground application.
[C-1-9] MUST report all these proprietary restrictions events via UsageStats.
[C-1-10] MUST provide a public and clear document or website that describes how proprietary restrictions are applied. This document or website MUST be linkable from the Android SDK documents and MUST include:
- Triggering conditions for proprietary restrictions.
- What and how an app can be restricted.
- How an app can be exempted from such restrictions.
- How an app can request an exemption from proprietary restrictions, if they support such an exemption for apps the user can install.
If an app is pre-installed on the device and has never been explicitly used by a user for more than 30 days, [C-1-3] [C-1-5] are exempted.
3.8.1 Launcher (Home Screen) : Updates to support for
monochrome/adaptive-icon
.See revision
If device implementations support monochrome icons, these icons:
- [C-6-1] MUST be used only when a user explicitly enables them (eg via Settings or wallpaper picker menu).
3.8.2 Widgets : Update to third-party app widget presence in the Launcher.
See revision
If device implementations support third-party app widgets, they:
- [C-1-2] MUST include built-in support for AppWidgets and expose user interface affordances to add, configure, view, and remove AppWidgets
directly within the Launcher.
- [C-1-2] MUST include built-in support for AppWidgets and expose user interface affordances to add, configure, view, and remove AppWidgets
3.8.3.1 Presentation of Notifications : Clarifying the definition of heads-up notifications.
See revision
Heads up notifications are notifications that are presented to the user as they come in independently of the surface the user is on.
3.8.3.3 DND (Do not Disturb) / Priority Mode : Update to include Priority Mode in DND (Do Not Disturb) requirements.
See revision
3.8.3.3. DND (Do not Disturb) / Priority Mode
If device implementations support the DND feature (also called Priority Mode), they:
3.8.6 Themes : New requirements for dynamic color tonal palettes.
See revision
If device implementations include a screen or video output, they:
[C-1-4] MUST generate dynamic color tonal palettes as specified in the AOSP documentation of
Settings.THEME_CUSTOMIZATION_OVERLAY_PACKAGES
(seeandroid.theme.customization.system_palette
andandroid.theme.customization.theme_style
).[C-1-5] MUST generate dynamic color tonal palettes using color theme styles enumerated in the
Settings.THEME_CUSTOMIZATION_OVERLAY_PACKAGES
documentation (seeandroid.theme.customization.theme_styles
), namelyTONAL_SPOT
,VIBRANT
,EXPRESSIVE
,SPRITZ
,RAINBOW
,FRUIT_SALAD
."Source color" used to generate dynamic color tonal palettes when sent with
android.theme.customization.system_palette
(as documented inSettings.THEME_CUSTOMIZATION_OVERLAY_PACKAGES
).[C-1-6] MUST have a
CAM16
chroma value of 5 or larger.SHOULD be derived from the wallpaper via
com.android.systemui.monet.ColorScheme#getSeedColors
, which provides multiple valid source colors to pick one from.SHOULD use the value
0xFF1B6EF3
, if none of the provided colors meet the above source color requirement.
3.8.17 Clipboard : Added new requirements section for content on the clipboard.
See revision
3.8.17. Clipboard
Device implementations:
- [C-0-1] MUST NOT send clipboard data to any component, activity, service, or across any network connection, without explicit user action (eg, pressing a button on the overlay), except for services mentioned in 9.8.6 Content Capture and App Search .
If device implementations generate a user-visible preview when content is copied to the clipboard for any
ClipData
item whereClipData.getDescription().getExtras()
containsandroid.content.extra.IS_SENSITIVE
, they:- [C-1-1] MUST redact the user visible preview
The AOSP reference implementation satisfies these clipboard requirements.
3.9.1.1 Device Owner Provisioning : Updates to device owner provisioning requirements.
See revision
If device implementations declare
android.software.device_admin
, they:- [C-1-1] MUST support enrolling a Device Policy Client (DPC) as a Device Owner app as described below:
- When the device implementation has neither users nor user data configured, it:
- [C-1-5] MUST enroll the DPC application as the Device Owner app or enable the DPC app to choose whether to become a Device Owner or a Profile Owner, if the device declares Near-Field Communications (NFC) support via the feature flag
android.hardware.nfc
and receives an NFC message containing a record with MIME typeMIME_TYPE_PROVISIONING_NFC
. - [C-1-8] MUST send the ACTION_GET_PROVISIONING_MODE intent after device owner provisioning is triggered so that the DPC app can choose whether to become a Device Owner or a Profile Owner, depending on the values of
android.app.extra.PROVISIONING_ALLOWED_PROVISIONING_MODES
, unless it can be determined from context that there is only one valid option.(such as for NFC based provisioning where Profile Owner provisioning is not supported). - [C-1-9] MUST send the ACTION_ADMIN_POLICY_COMPLIANCE intent to the Device Owner app if a Device Owner is established during provisioning regardless of the provisioning method used. The user must not be able to proceed in the Setup Wizard until the Device Owner app finishes.
- [C-1-5] MUST enroll the DPC application as the Device Owner app or enable the DPC app to choose whether to become a Device Owner or a Profile Owner, if the device declares Near-Field Communications (NFC) support via the feature flag
- When the device implementation has users or user data, it:
- [C-1-7] MUST not enroll any DPC application as the Device Owner App any more.
- When the device implementation has neither users nor user data configured, it:
- [C-1-2] MUST show an appropriate disclosure notice (such as referenced in AOSP ) and obtain affirmative consent from the end user prior to an app being set as Device Owner, unless the device is programmatically configured for retail demo mode prior to on-screen, end-user interaction.
require some affirmative action before or during the provisioning process to consent to an app being set as Device Owner. Consent can be via user action or by some programmatic means but appropriate disclosure notice (as referenced in AOSP) MUST be shown before device owner provisioning is initiated. Also, the programmatic device owner consent mechanism used (by enterprises) for device owner provisioning MUST NOT interfere with the Out-Of-Box Experience for non-enterprise use. [C-1-3] MUST NOT hard code the consent or prevent the use of other device owner apps.
If device implementations declare
android.software.device_admin
, but also include a proprietaryDevice Ownerdevice management solution and provide a mechanism to promote an application configured in their solution as a "Device Owner equivalent" to the standard "Device Owner" as recognized by the standard Android DevicePolicyManager APIs, they:- [C-2-1] MUST have a process in place to verify that the specific app being promoted belongs to a legitimate enterprise device management solution and has been configured in the proprietary solution to have the rights equivalent as a "Device Owner".
- [C-2-2] MUST show the same AOSP Device Owner consent disclosure as the flow initiated by
android.app.action.PROVISION_MANAGED_DEVICE
prior to enrolling the DPC application as "Device Owner". - [C-2-3] MUST NOT hard code the consent or prevent the use of other device owner apps.
MAY have user data on the device prior to enrolling the DPC application as "Device Owner".
- [C-1-1] MUST support enrolling a Device Policy Client (DPC) as a Device Owner app as described below:
3.9.4 Device Management Role Requirements : Added a section for Device Management Role Requirements.
See revision
3.9.4 Device Policy Management Role Requirements
If device implementations report
android.software.device_admin
orandroid.software.managed_users
, then they:- [C-1-1] MUST support the device policy management role as defined in section 9.1 . The application that holds the device policy management role MAY be defined by setting
config_devicePolicyManagement
to the package name. The package name MUST be followed by:
and the signing certificate unless the application is preloaded.
If a package name is not defined for
config_devicePolicyManagement
as described above:- [C-2-1] Device implementations MUST support provisioning without a device policy management role holder application ( AOSP provides a reference implementation ).
If a package name is defined for
config_devicePolicyManagement
as described above:- [C-3-1] The application MUST be installed on all profiles for a user .
- [C-3-2] Device implementations MAY define an application that updates the device policy management role holder before provisioning by setting
config_devicePolicyManagementUpdater
.
If a package name is defined for
config_devicePolicyManagementUpdater
as described above:- [C-4-1] The application MUST be preinstalled on the device.
- [C-4-2] The application MUST implement an intent filter which resolves
android.app.action.UPDATE_DEVICE_POLICY_MANAGEMENT_ROLE_HOLDER
.
- [C-1-1] MUST support the device policy management role as defined in section 9.1 . The application that holds the device policy management role MAY be defined by setting
3.18 Contacts : Adding information for new contacts.
See revision
Default account for new contacts: Contacts Provider provides APIs to manage the setting of the default account when creating a new contact.
If device implementations preload a contacts app, then the pre-loaded contacts app:
[C-2-1] MUST handle the intent
ContactsContract.Settings.ACTION_SET_DEFAULT_ACCOUNT
to launch a UI for account selection and save the setting to Contacts Provider when an account is selected.[C-2-2] MUST honor the default account setting when handling
Intent.ACTION_INSERT and Intent.ACTION_INSERT_OR_EDIT
for theContactsContracts.Contacts.CONTENT_TYPE
andContactsContract.RawContacts.CONTENT_TYPE
by initially selecting the account.
4. Application Packaging Compatibility
4. Application Packaging Compatibility : Updates to APK Signature Scheme version.
See revision
Device implementations:
[C-0-2] MUST support verifying “.apk” files using the APK Signature Scheme v3.1 , APK Signature Scheme v3 , APK Signature Scheme v2 and JAR signing .
[C-0-9] MUST support verifying .apk files using the APK Signature Scheme v4 and APK Signature Scheme v4.1 .
5. Multimedia Compatibility
5.1.2 Audio Decoding : Added new requirements for decoders capable of outputting mutli-channel audio.
See revision
If device implementations support the decoding of AAC input buffers of multichannel streams (ie more than two channels) to PCM through the default AAC audio decoder in the
android.media.MediaCodec
API, then the following MUST be supported:- [C-7-1] MUST be able to be configured by the application using the decoding with the key
KEY_MAX_OUTPUT_CHANNEL_COUNT
to control whether the content is downmixed to stereo (when using a value of 2) or is output using the native number of channels (when using a value equal or greater to that number). For instance a value of 6 or greater would configure a decoder to output 6 channels when fed 5.1 content. - [C-7-2] When decoding, the decoder MUST advertise the channel mask being used on the output format with the
KEY_CHANNEL_MASK
key, using theandroid.media.AudioFormat
constants (example:CHANNEL_OUT_5POINT1
).
If device implementations support audio decoders other than the default AAC audio decoder and are capable of outputting multi-channel audio (ie more than 2 channels) when fed compressed multi-channel content, then:
- [C-SR] The decoder is STRONGLY RECOMMENDED to be able to be configured by the application using the decoding with the key
KEY_MAX_OUTPUT_CHANNEL_COUNT
to control whether the content is downmixed to stereo (when using a value of 2) or is output using the native number of channels (when using a value equal or greater to that number). For instance a value of 6 or greater would configure a decoder to output 6 channels when fed 5.1 content. - [C-SR] When decoding, the decoder is STRONGLY RECOMMENDED to advertise the channel mask being used on the output format with the
KEY_CHANNEL_MASK
key, using the android.media.AudioFormat constants (example:CHANNEL_OUT_5POINT1
).
- [C-7-1] MUST be able to be configured by the application using the decoding with the key
5.4.1 Raw Audio Capture and Microphone Information : Updates to supported audio sources for audio input streams.
See revision
If device implementations declare
android.hardware.microphone
, they:[C-1-1] MUST allow capture of raw audio content with the following characteristics for any
AudioRecord
orAAudio
INPUT stream that is opened successfully. At a minimum, the following characteristics MUST be supported :- Format: Linear PCM, 16-bit
- Sampling rates: 8000, 11025, 16000, 44100, 48000 Hz
- Channels: Mono
- Audio Sources:
DEFAULT
,MIC
,CAMCORDER
,VOICE_RECOGNITION
,VOICE_COMMUNICATION
,UNPROCESSED
, orVOICE_PERFORMANCE
. This also applies to the equivalent Input Presets inAAudio
, for example,AAUDIO_INPUT_PRESET_CAMCORDER
. - [C-1-4] MUST honor the
MicrophoneInfo
API and properly fill in information for the available microphones on device accessible to the third-party applications via theAudioManager.getMicrophones()
API, for active AudioRecord usingMediaRecorder.AudioSources DEFAULT
,MIC
,CAMCORDER
,VOICE_RECOGNITION
,VOICE_COMMUNICATION
,UNPROCESSED
, orVOICE_PERFORMANCE
.and the currently active microphones which are accessible to the third party applications via theAudioRecord.getActiveMicrophones()
andMediaRecorder.getActiveMicrophones()
APIs.
5.4.2 Capture for Voice Recognition : Updated requirements for voice recognition audio stream and added requirements for microphone gain levels.
See revision
If device implementations declare
android.hardware.microphone
, they:- SHOULD record the voice recognition audio stream with approximately flat amplitude versus frequency characteristics: specifically, ±3 dB, from 100 Hz to 4000 Hz.
- SHOULD record the voice recognition audio stream with input sensitivity set such that a 90 dB sound power level (SPL) source at 1000 Hz yields RMS of 2500 for 16-bit samples.
- SHOULD exhibit approximately flat amplitude-versus-frequency characteristics in the mid-frequency range: specifically ±3dB from 100 Hz to 4000 Hz for each and every microphone used to record the voice recognition audio source.
- [C-SR] are STRONGLY RECOMMENDED to exhibit amplitude levels in the low frequency range: specifically from ±20 dB from 30 Hz to 100 Hz compared to the mid-frequency range for each and every microphone used to record the voice recognition audio source.
- [C-SR] are STRONGLY RECOMMENDED to exhibit amplitude levels in the high frequency range: specifically from ±30 dB from 4000 Hz to 22 KHz compared to the mid-frequency range for each and every microphone used to record the voice recognition audio source.
- SHOULD set audio input sensitivity such that a 1000 Hz sinusoidal tone source played at 90 dB Sound Pressure Level (SPL) (measured next to the microphone) yields an ideal response of RMS 2500 within a range of 1770 and 3530 for 16 bit-samples (or -22.35 db ±3dB Full Scale for floating point/double precision samples) for each and every microphone used to record the voice recognition audio source.
5.4.6 Microphone Gain Levels : Moved requirements for Microphone Gain Levels to section 5.4.2.
See revision
5.4.6. Microphone Gain Levels [Moved to 5.4.2]
If device implementations declare
android.hardware.microphone
, they:- SHOULD exhibit approximately flat amplitude-versus-frequency characteristics in the mid-frequency range: specifically ±3dB from 100 Hz to 4000 Hz for each and every microphone used to record the voice recognition audio source.
- [C-SR] are STRONGLY RECOMMENDED to exhibit amplitude levels in the low frequency range: specifically from ±20 dB from 5 Hz to 100 Hz compared to the mid-frequency range for each and every microphone used to record the voice recognition audio source.
- [C-SR] are STRONGLY RECOMMENDED to exhibit amplitude levels in the high frequency range: specifically from ±30 dB from 4000 Hz to 22 KHz compared to the mid-frequency range for each and every microphone used to record the voice recognition audio source.
- SHOULD set audio input sensitivity such that a 1000 Hz sinusoidal tone source played at 90 dB Sound Pressure Level (SPL) yields a response with RMS of 2500 for 16 bit-samples (or -22.35 dB Full Scale for floating point/double precision samples) for each and every microphone used to record the voice recognition audio source.
5.5.4 Audio Offload : Updates to the audio offload playback requirements.
See revision
If device implementations support audio offload playback , they:
- [C-SR] Are STRONGLY RECOMMENDED to trim the played gapless audio content between two clips with the same format when specified by the AudioTrack gapless API and the media container for MediaPlayer.
5.6 Audio Latency : Updates to the audio latency requirements.
See revision
For the purposes of this section, use the following definitions:
- cold output jitter . The variability among separate measurements of cold output latency values.
- cold input jitter . The variability among separate measurements of cold input latency values.
If device implementations declare
android.hardware.audio.output
, they MUST meet or exceed the following requirements:- [C-1-2] Cold output latency of 500 milliseconds or less.
- [C-1-3] Opening an output stream using
AAudioStreamBuilder_openStream()
MUST take less than 1000 milliseconds.
If device implementations declare
android.hardware.audio.output
they are STRONGLY RECOMMENDED to meet or exceed the following requirements:- [C-SR] Cold output latency of 100 milliseconds or less over the speaker data path.
Existing and new devices that run this version of Android are VERY STRONGLY RECOMMENDED to meet these requirements now. In a future platform release, we will require Cold output latency of 200 ms or less as a MUST. [C-SR] Minimize the cold output jitter.
If device implementations include
android.hardware.microphone
, they MUST meet these input audio requirements:- [C-3-2] Cold input latency of 500 milliseconds or less.
- [C-3-3] Opening an input stream using
AAudioStreamBuilder_openStream()
MUST take less than 1000 milliseconds.
If device implementations include
android.hardware.microphone
, they are STRONGLY RECOMMENDED to meet these input audio requirements:- [C-SR] Cold input latency of 100 milliseconds or less over the microphone data path.
Existing and new devices that run this version of Android are VERY STRONGLY RECOMMENDED to meet these requirements now. In a future platform release we will require Cold input latency of 200 ms or less as a MUST.
- [C-SR] Continuous input latency of 30 milliseconds or less.
- [C-SR] Minimize the cold input jitter.
5.10 Professional Audio : Updates to audio latency requirements for professional audio support.
See revision
If device implementations report support for feature
android.hardware.audio.pro
via the android.content.pm.PackageManager class, they:- [C-1-2] MUST have the continuous round-trip audio latency, as defined in section 5.6 Audio Latency of 25 milliseconds or less
and SHOULD be 10 milliseconds or lessover at least one supported path. - [C-1-5] MUST meet latencies and USB audio requirements using the AAudio native audio API and
AAUDIO_PERFORMANCE_MODE_LOW_LATENCY
. - [C-1-8] MUST have an average Tap-to-tone latency of 80 milliseconds or less over at least 5 measurements over the speaker to microphone data path.
- [C-SR] Are STRONGLY RECOMMENDED to provide a consistent level of CPU performance while audio is active and CPU load is varying. This should be tested using the Android app SynthMark . SynthMark uses a software synthesizer running on a simulated audio framework that measures system performance. See the SynthMark documentation for an explanation of the benchmarks. The SynthMark app needs to be run using the “Automated Test” option and achieve the following results: * voicemark.90 >= 32 voices * latencymark.fixed.little <= 15 msec * latencymark.dynamic.little <= 50 msec
SHOULD have a latency from touch input to audio output of less than or equal to 40 ms.
If device implementations include a 4 conductor 3.5mm audio jack, they:
- [C-2-1] MUST have a mean Continuous Round-trip Audio Latency, as defined in section 5.6 Audio Latency , of 20 milliseconds or less, over 5 measurements with a Mean Absolute Deviation less than 5 milliseconds over the audio jack path using an audio loopback dongle .
- [C-1-2] MUST have the continuous round-trip audio latency, as defined in section 5.6 Audio Latency of 25 milliseconds or less
5.12 HDR Video : Added a new section for HDR Video requirements.
6. Developer Tools and Options Compatibility
6.1 Developer Tools : Updates to connectivity and GPU Kernel requirements.
See revision
If device implementations support adb connections to a host machine via Wi-Fi or Ethernet , they:
- [C-4-1] MUST have the
AdbManager#isAdbWifiSupported()
method returntrue
.
If device implementations support adb connections to a host machine via Wi-Fi or Ethernet , and includes at least one camera, they:
- [C-5-1] MUST have the
AdbManager#isAdbWifiQrSupported()
method returntrue
.
GPU work information
Device implementations:
- [C-6-1] MUST implement the shell command
dumpsys gpu --gpuwork
to display the aggregated GPU work data returned by thepower/gpu_work_period
kernel tracepoint, or display no data if the tracepoint is not supported. The AOSP implementation isframeworks/native/services/gpuservice/gpuwork/
.
- [C-6-1] MUST implement the shell command
- [C-4-1] MUST have the
7. Hardware Compatibility
7.1.4.1 OpenGL ES : Update to recommended extensions.
See revision
If device implementations support any of the OpenGL ES versions, they:
- SHOULD support the
EGL_IMG_context_priority
andEGL_EXT_protected_content
extensions.
- SHOULD support the
7.1.4.2 Vulkan : Updates to version supported for Vulkan.
See revision
If device implementations support OpenGL ES 3.1, they:
- [SR] Are STRONGLY RECOMMENDED to include support for Vulkan 1.3 .
Vulkan 1.1 - MUST NOT support a Vulkan Variant version (ie the variant part of the Vulkan core version MUST be zero).
If device implementations include a screen or video output, they:
- [SR] Are STRONGLY RECOMMENDED to include support for Vulkan 1.3 .
Vulkan 1.1
If device implementations include support for Vulkan 1.0 or higher, they:
- SHOULD support
VkPhysicalDeviceProtectedMemoryFeatures
andVK_EXT_global_priority
. - [C-1-12] MUST NOT enumerate support for the
VK_KHR_performance_query
extension. - [C-SR] Are STRONGLY RECOMMENDED to satisfy the requirements specified by the Android Baseline 2021 profile.
- [SR] Are STRONGLY RECOMMENDED to include support for Vulkan 1.3 .
7.2.3 Navigation Keys :
See revision
Device implementations:
- [C-SR] Are STRONGLY RECOMMENDED to provide all navigation functions as cancellable. 'Cancellable' is defined as the user's ability to prevent the navigation function from executing (eg going home, going back, etc.) if the swipe is not released past a certain threshold.
If the back navigation function is provided and the user cancels the Back gesture, then:
- [C-8-1]
OnBackInvokedCallback.onBackCancelled()
MUST be called. - [C-8-2]
OnBackInvokedCallback.onBackInvoked()
MUST NOT be called. - [C-8-3] KEYCODE_BACK event MUST NOT be dispatched.
If the back navigation function is provided but the foreground application does NOT have an
OnBackInvokedCallback
registered, then:- The system SHOULD provide an animation for the foreground application that suggests that the user is going back, as provided in AOSP.
If device implementations provide support for the system API
setNavBarMode
to allow any system app withandroid.permission.STATUS_BAR
permission to set the navigation bar mode, then they:- [C-9-1] MUST provide support for kid-friendly icons or button-based navigation as provided in the AOSP code.
7.3.1 Accelerometer : Updates to sensor requirements for accelerometers.
See revision
If device implementations include an accelerometer,
a 3-axis accelerometer,they:[C-1-2] MUST implement and reportTYPE_ACCELEROMETER
sensor.[SR] are STRONGLY RECOMMENDED to implement theTYPE_SIGNIFICANT_MOTION
composite sensor.[SR] are STRONGLY RECOMMENDED to implement and reportTYPE_ACCELEROMETER_UNCALIBRATED
sensor. Android devices are STRONGLY RECOMMENDED to meet this requirement so they will be able to upgrade to the future platform release where this might become REQUIRED.SHOULD implement theTYPE_SIGNIFICANT_MOTION
,TYPE_TILT_DETECTOR
,TYPE_STEP_DETECTOR
,TYPE_STEP_COUNTER
composite sensors as described in the Android SDK document.
If device implementations include a 3-axis accelerometer, they:
- [C-2-1] MUST implement and report
TYPE_ACCELEROMETER
sensor. - [C-SR] Are STRONGLY RECOMMENDED to implement the
TYPE_SIGNIFICANT_MOTION
composite sensor. - [C-SR] Are STRONGLY RECOMMENDED to implement and report
TYPE_ACCELEROMETER_UNCALIBRATED
sensor. Android devices are STRONGLY RECOMMENDED to meet this requirement so they will be able to upgrade to the future platform release where this might become REQUIRED. - SHOULD implement the
TYPE_SIGNIFICANT_MOTION
,TYPE_TILT_DETECTOR
,TYPE_STEP_DETECTOR
,TYPE_STEP_COUNTER
composite sensors as described in the Android SDK document.
If device implementations include an accelerometer with less than 3 axes, they:
- [C-3-1] MUST implement and report
TYPE_ACCELEROMETER_LIMITED_AXES
sensor. - [C-SR] Are STRONGLY_RECOMMENDED to implement and report
TYPE_ACCELEROMETER_LIMITED_AXES_UNCALIBRATED
sensor.
If device implementations include a 3-axis accelerometer and any of the
TYPE_SIGNIFICANT_MOTION
,TYPE_TILT_DETECTOR
,TYPE_STEP_DETECTOR
,TYPE_STEP_COUNTER
composite sensors are implemented:- [C-4-1] The sum of their power consumption MUST always be less than 4 mW.
If device implementations include a 3-axis accelerometer and a 3-axis gyroscope sensor, they:
- [C-5-1] MUST implement the
TYPE_GRAVITY
andTYPE_LINEAR_ACCELERATION
composite sensors.
If device implementations include a 3-axis accelerometer, a 3-axis gyroscope sensor, and a magnetometer sensor, they:
- [C-6-1] MUST implement a
TYPE_ROTATION_VECTOR
composite sensor.
7.3.4 Gyroscopes : Updates to sensor requirements for gyroscopes.
See revision
If device implementations include a gyroscope, they:
- [C-1-1] MUST be able to report events up to a frequency of at least 50 Hz.
- [C-1-4] MUST have a resolution of 12-bits or more.
- [C-1-5] MUST be temperature compensated.
- [C-1-6] MUST be calibrated and compensated while in use, and preserve the compensation parameters between device reboots.
- [C-1-7] MUST have a variance no greater than 1e-7 rad^2 / s^2 per Hz (variance per Hz, or rad^2 / s). The variance is allowed to vary with the sampling rate, but MUST be constrained by this value. In other words, if you measure the variance of the gyro at 1 Hz sampling rate it SHOULD be no greater than 1e-7 rad^2/s^2.
- [C-SR] Calibration error is STRONGLY RECOMMENDED to be less than 0.01 rad/s when device is stationary at room temperature.
- [C-SR] Are STRONGLY RECOMMENDED to have a resolution of 16-bits or more.
- SHOULD report events up to at least 200 Hz.
If device implementations include a 3-axis gyroscope, they:
- [C-2-1] MUST implement the
TYPE_GYROSCOPE
sensor.
If device implementations include a gyroscope with less than 3 axes, they:
- [C-3-1] MUST implement and report
TYPE_GYROSCOPE_LIMITED_AXES
sensor. - [C-SR] Are STRONGLY_RECOMMENDED to implement and report
TYPE_GYROSCOPE_LIMITED_AXES_UNCALIBRATED
sensor.
If device implementations include a 3-axis gyroscope, an accelerometer sensor and a magnetometer sensor, they:
- [C-4-1] MUST implement a
TYPE_ROTATION_VECTOR
composite sensor.
If device implementations include a 3-axis accelerometer and a 3-axis gyroscope sensor, they:
- [C-5-1] MUST implement the
TYPE_GRAVITY
andTYPE_LINEAR_ACCELERATION
composite sensors.
7.3.10 Biometric Sensors : Updates to sensor requirements for biometric sensors.
See revision
Biometric sensors can be classified as Class 3 (formerly Strong ), Class 2 (formerly Weak ), or Class 1 (formerly Convenience ) based on their spoof and imposter acceptance rates, and on the security of the biometric pipeline. This classification determines the capabilities the biometric sensor has to interface with the platform and with third-party applications. Sensors need to meet additional requirements as detailed below if they wish to be classified as either Class 1 , Class 2 or Class 3 .
Sensors are classified as Class 1 by default, and need to meet additional requirements as detailed below if they wish to be classified as either Class 2 or Class 3 . Both Class 2 and Class 3 biometrics get additional capabilities as detailed below.If device implementations wish to treat a biometric sensor as Class 1 (formerly Convenience ), they:
- [C-1-11] MUST have a spoof and imposter acceptance rate not higher than 30%, with (1) a spoof and imposter acceptance rate for Level A presentation attack instrument (PAI) species not higher than 30%, and (2) a spoof and imposter acceptance rate of Level B PAI species not higher than 40%, as measured by the Android Biometrics Test Protocols.
If device implementations wish to treat a biometric sensor as Class 2 (formerly Weak ), they:
- [C-2-2] MUST have a spoof and imposter acceptance rate not higher than 20%, with (1) a spoof and imposter acceptance rate for Level A presentation attack instrument (PAI) species not higher than 20%, and (2) a spoof and imposter acceptance rate of Level B PAI species not higher than 30%, as measured by the Android Biometrics Test Protocols .
If device implementations wish to treat a biometric sensor as Class 3 (formerly Strong ), they:
- [C-3-3] MUST have a spoof and imposter acceptance rate not higher than 7%, with (1) a spoof and imposter acceptance rate for Level A presentation attack instrument (PAI) species not higher than 7%, and (2) a spoof and imposter acceptance rate of Level B PAI species not higher than 20%, as measured by the Android Biometrics Test Protocols .
7.3.13 IEEE 802.1.15.4 (UWB) : Added a new requirements section for UWB.
See revision
7.3.13. IEEE 802.1.15.4 (UWB)
If device implementations include support for 802.1.15.4 and expose the functionality to a third-party application, they:
- [C-1-1] MUST implement the corresponding Android API in android.uwb.
- [C-1-2] MUST report the hardware feature flag android.hardware.uwb.
- [C-1-3] MUST support all the relevant UWB profiles defined in Android implementation.
- [C-1-4] MUST provide a user affordance to allow the user to toggle the UWB radio on/off state.
- [C-1-5] MUST enforce that apps using UWB radio hold UWB_RANGING permission (under NEARBY_DEVICES permission group).
- [C-1-6] Are STRONGLY RECOMMENDED to pass the relevant conformance and certification tests defined by standard organizations, including FIRA , CCC and CSA .
7.4.1 Telephony : Updates to telephony requirements for GSM and CDMA telephony, and cellular usage settings.
See revision
If device implementations support eUICCs or eSIMs/embedded SIMs and include a proprietary mechanism to make eSIM functionality available for third-party developers, they:
- [C-3-1] MUST declare the
android.hardware.telephony.euicc
feature flag.provide a complete implementation of theEuiccManager API
.
If device implementations include GSM or CDMA telephony, then:
- [C-6-1] The
SmsManager#sendTextMessage
andSmsManager#sendMultipartTextMessage
MUST result in corresponding calls toCarrierMessagingService
for providing text messaging functionality.SmsManager#sendMultimediaMessage
andSmsManager#downloadMultimediaMessage
MUST result in corresponding calls toCarrierMessagingService
for providing multimedia messaging functionality. - [C-6-2] The application designated by
android.provider.Telephony.Sms#getDefaultSmsPackage
MUST use SmsManager APIs when sending and receiving SMS and MMS messages. The AOSP reference implementation in packages/apps/Messaging meets this requirement. - [C-6-3] The application which responds to
Intent#ACTION_DIAL
MUST support entry of arbitrary dialer codes formatted as*#*#CODE#*#*
and trigger a correspondingTelephonyManager#ACTION_SECRET_CODE
broadcast. - [C-6-4] The application which responds to
Intent#ACTION_DIAL
MUST useVoicemailContract.Voicemails#TRANSCRIPTION
to display visual voicemail transcription to users if it supports visual voicemail transcriptions. - [C-6-5] MUST represent all SubscriptionInfo with equivalent group UUIDs as a single subscription in all user-visible affordances that display and control SIM card information. Examples of such affordances include settings interfaces that match
Settings#ACTION_MANAGE_ALL_SIM_PROFILES_SETTINGS
orEuiccManager#ACTION_MANAGE_EMBEDDED_SUBSCRIPTIONS
. - [C-6-6] MUST NOT display or allow control of any SubscriptionInfo with a non-null group UUID and opportunistic bit in any user-visible affordances that allow configuration or control of SIM card settings.
If the device device implementations include GSM or CDMA telephony and provide a system status bar, then:
- [C-6-7] MUST select a representative active subscription for a given group UUID to display to the user in any affordances that provide SIM status information. Examples of such affordances include the status bar cellular signal icon or quick settings tile.
- [C-SR] It is STRONGLY RECOMMENDED that the representative subscription is chosen to be the active data subscription unless the device is in a voice call, during which it is STRONGLY RECOMMENDED that the representative subscription is the active voice subscription.
If device implementations include GSM or CDMA telephony, then:
- [C-6-8] MUST be capable of opening and concurrently utilizing the maximum number of logical channels (20 in total) for each UICC per ETSI TS 102 221.
- [C-6-10] MUST NOT apply any of the following behaviors to active carrier apps (as designated by
TelephonyManager#getCarrierServicePackageName
) automatically or without explicit user confirmation:- Revoke or limit network access
- Revoke permissions
- Restrict background or foreground app execution beyond the existing power management features included in AOSP
- Disable or uninstall the app
If device device implementations include GSM or CDMA telephony and all active, non-opportunistic subscriptions that share a group UUID are disabled, physically removed from the device, or marked opportunistic, then the device:
- [C-7-1] MUST automatically disable all remaining active opportunistic subscriptions in the same group.
If device implementations include GSM telephony but not CDMA telephony, they:
- [C-8-1] MUST NOT declare
PackageManager#FEATURE_TELEPHONY_CDMA
. - [C-8-2] MUST throw an
IllegalArgumentException
upon attempts to set any 3GPP2 network types in preferred or allowed network type bitmasks. - [C-8-3] MUST return an empty string from
TelephonyManager#getMeid
.
If the device implementations support eUICCs with multiple ports and profiles, they:
- [C-11-1] MUST declare the
android.hardware.telephony.euicc.mep
feature flag.
- [C-3-1] MUST declare the
7.4.1.1 Number Blocking Compatibility : Updates to the number blocking requirements.
See revision
If device implementations report the
android.hardware.telephony feature
, they:- [C-1-4] MUST NOT write to the platform call log provider for a blocked call.
- [C-1-4] MUST write to the platform call log provider for a blocked call and MUST filter calls with
BLOCKED_TYPE
out of the default call log view in the pre-installed dialer app. - SHOULD provide a user affordance to show blocked calls in the pre-installed dialer app.
7.4.1.3 Cellular NAT-T Keepalive Offload : New section for Cellular NAT-T Keepalive Offload.
See revision
7.4.1.3. Cellular NAT-T Keepalive Offload
Device implementations:
- SHOULD include support for Cellular keepalive offload.
If device implementations include support for Cellular keepalive offload and exposes the functionality to third-party apps, they:
- [C-1-1] MUST support the SocketKeepAlive API.
- [C-1-2] MUST support at least one concurrent keepalive slot over cellular.
- [C-1-3] MUST support as many concurrent cellular keepalive slots as are supported by the Cellular Radio HAL.
- [C-SR] Are STRONGLY RECOMMENDED to support at least three cellular keepalive slots per radio instance.
If device implementations do not include support for cellular keepalive offload, they:
- [C-2-1] MUST return ERROR_UNSUPPORTED.
7.4.2.5 Wi-Fi Location (Wi-Fi Round Trip Time - RTT) : Updates to Wi-Fi location accuracy.
See revision
If device implementations include support for Wi-Fi Location and expose the functionality to third-party apps, then they:
- [C-1-4] MUST be accurate to within 2 meters at 80 MHz bandwidth at the 68th percentile (as calculated with the Cumulative Distribution Function).
- [C-SR] Are STRONGLY RECOMMENDED to report it accurately to within 1.5 meters at 80 MHz bandwidth at the 68th percentile (as calculated with the Cumulative Distribution Function).
7.4.2.6 Wi-Fi Keepalive Offload : Updated to add cellular keepalive offload requirements.
See revision
Device implementations:
- SHOULD include support for Wi-Fi keepalive offload.
If device implementations include support for Wi-Fi keepalive offload and expose the functionality to third-party apps, they:
- [C-1-1] MUST support the SocketKeepAlive API.
- [C-1-2] MUST support at least three concurrent keepalive slots over Wi-Fi
and at least one keepalive slot over cellular.If device implementations do not include support for Wi-Fi keepalive offload, they:
- [C-2-1] MUST return
ERROR_UNSUPPORTED
.
7.4.2.9 Trust On First Use (TOFU) : Added Trust on First Use requirements section.
See revision
7.4.2.9 Trust On First Use (TOFU)
If device implementations support Trust on first usage (TOFU) and allow the user to define WPA/WPA2/WPA3-Enterprise configurations, then they:
- [C-4-1] MUST provide the user an option to select to use TOFU.
7.4.3 Bluetooth : Update to Bluetooth requirements.
See revision
If device implementations support Bluetooth Audio profile, they:
- SHOULD support Advanced Audio Codecs and Bluetooth Audio Codecs (eg LDAC) with A2DP.
If device implementations return
true
for theBluetoothAdapter.isLeAudioSupported()
API, then they:- [C-7-1] MUST support unicast client.
- [C-7-2] MUST support 2M PHY.
- [C-7-3] MUST support LE Extended advertising.
- [C-7-4] MUST support at least 2 CIS connections in a CIG.
- [C-7-5] MUST enable BAP unicast client, CSIP set coordinator, MCP server, VCP controller, CCP server simultaneously.
- [C-SR] Are STRONGLY RECOMMENDED to enable HAP unicast client.
If device implementations return
true
for theBluetoothAdapter.isLeAudioBroadcastSourceSupported()
API, then they:- [C-8-1] MUST support at least 2 BIS links in a BIG.
- [C-8-2] MUST enable BAP broadcast source, BAP broadcast assistant simultaneously.
- [C-8-3] MUST support LE Periodic advertising.
If device implementations return
true
for theBluetoothAdapter.isLeAudioBroadcastAssistantSupported()
API, then they:- [C-9-1] MUST support PAST (Periodic Advertising Sync Transfer).
- [C-9-2] MUST support LE Periodic advertising.
If device implementations declare
FEATURE_BLUETOOTH_LE
, they:- [C-10-1] MUST have RSSI measurements be within +/-9dB for 95% of the measurements at 1m distance from a reference device transmitting at
ADVERTISE_TX_POWER_HIGH
in line of sight environment. - [C-10-2] MUST include Rx/Tx corrections to reduce per-channel deviations so that the measurements on each of the 3 channels, on each of the antennas (if multiple are used), are within +/-3dB of one another for 95% of the measurements.
- [C-SR] Are STRONGLY RECOMMENDED to measure and compensate for Rx offset to ensure the median BLE RSSI is -60dBm +/-10 dB at 1m distance from a reference device transmitting at
ADVERTISE_TX_POWER_HIGH
, where devices are oriented such that they are on 'parallel planes' with screens facing the same direction. - [C-SR] Are STRONGLY RECOMMENDED to measure and compensate for Tx offset to ensure the median BLE RSSI is -60dBm +/-10 dB when scanning from a reference device positioned at 1m distance and transmitting at
ADVERTISE_TX_POWER_HIGH
, where devices are oriented such that they are on 'parallel planes' with screens facing the same direction.
উপস্থিতি ক্রমাঙ্কন প্রয়োজনীয়তাগুলিতে নির্দিষ্ট পরিমাপ সেটআপ পদক্ষেপগুলি অনুসরণ করার জন্য এটি দৃঢ়ভাবে সুপারিশ করা হয়৷
If device implementations support Bluetooth version 5.0, then they:
- [C-SR] Are STRONGLY RECOMMENDED to provide support for:
- LE 2M PHY
- LE Codec PHY
- LE Advertising Extension
- Periodic advertising
- At least 10 advertisement sets
- At least 8 LE concurrent connections. Each connection can be in either connection topology roles.
- LE Link Layer Privacy
- A "resolving list" size of at least 8 entries
7.4.9 UWB : Added a requirements section for UWB hardware.
See revision
7.4.9. UWB
If device implementations report support for feature
android.hardware.uwb
via theandroid.content.pm.PackageManager
class, then they:- [C-1-1] MUST ensure the distance measurements are within +/-15 cm for 95% of the measurements in the line of sight environment at 1m distance in a non-reflective chamber.
- [C-1-2] MUST ensure that the median of the distance measurements at 1m from the reference device is within [0.75m, 1.25m], where ground truth distance is measured from the top edge of the DUT held face up and tilted 45 degrees.
উপস্থিতি ক্রমাঙ্কন প্রয়োজনীয়তাগুলিতে নির্দিষ্ট পরিমাপ সেটআপ পদক্ষেপগুলি অনুসরণ করার জন্য এটি দৃঢ়ভাবে সুপারিশ করা হয়৷
7.5 Cameras : Updates to the requirements for HDR 10-bit output capability.
See revision
If device implementations support HDR 10-bit output capability, then they:
- [C-2-1] MUST support at least the HLG HDR profile for every camera device that supports 10-bit output.
- [C-2-2] MUST support 10-bit output for either the primary rear-facing or the primary front-facing camera.
- [C-SR] Are STRONGLY RECOMMENDED to support 10-bit output for both primary cameras.
- [C-2-3] MUST support the same HDR profiles for all BACKWARD_COMPATIBLE-capable physical sub-cameras of a logical camera, and the logical camera itself.
For Logical camera devices which support 10-bit HDR that implement the
android.hardware.camera2.CaptureRequest#CONTROL_ZOOM_RATIO
API, they:- [C-3-1] MUST support switching between all the backwards-compatible physical cameras via the
CONTROL_ZOOM_RATIO
control on the logical camera.
7.7.2 USB Host Mode : Revisions for dual role ports.
See revision
If device implementations include a USB port supporting host mode and USB Type-C, they:
- [C-4-1] MUST implement Dual Role Port functionality as defined by the USB Type-C specification (section 4.5.1.3.3). For Dual Role Ports, On devices that include a 3.5mm audio jack, the USB sink detection (host mode) MAY be off by default but it MUST be possible for the user to enable it.
7.11 Media Performance Class : Updated to include Android T.
See revision
If device implementations return non-zero value for
android.os.Build.VERSION_CODES.MEDIA_PERFORMANCE_CLASS
, they:- [C-1-3] MUST meet all requirements for "Media Performance Class" described in section 2.2.7 .
In other words, media performance class in Android T is only defined for handheld devices at version T, S or R.
See section 2.2.7 for device-specific requirements.
9. Security Model Compatibility
9.1 Permissions : Extend accepted paths for permissions allowlists for preinstalled apps to APEX files.
See revision
- [C-0-2] Permissions with a
protectionLevel
ofPROTECTION_FLAG_PRIVILEGED
MUST only be granted to apps preinstalled in the privileged path(s) of the system image (as well as APEX files ) and be within the subset of the explicitly allowlisted permissions for each app. The AOSP implementation meets this requirement by reading and honoring the allowlisted permissions for each app from the files in theetc/permissions/
path and using thesystem/priv-app
path as the privileged path.
- [C-0-2] Permissions with a
9.7 Security Features : Updates to initialization requirements to maintain kernel integrity.
See revision
Kernel integrity and self-protection features are integral to Android security. Device implementations:
- [C-SR] Are STRONGLY RECOMMENDED to enable stack initialization in the kernel to prevent uses of uninitialized local variables (
CONFIG_INIT_STACK_ALL
orCONFIG_INIT_STACK_ALL_ZERO
). Also, device implementations SHOULD NOT assume the value used by the compiler to initialize the locals.
- [C-SR] Are STRONGLY RECOMMENDED to enable stack initialization in the kernel to prevent uses of uninitialized local variables (
9.8.7 Privacy — Clipboard Access : Automatically clear clipboard data after 60 minutes following a cut/copy/paste activity to protect user privacy.
See revision
Device implementations:
- [C-0-1] MUST NOT return a clipped data from the clipboard (eg via the
ClipboardManager
API) unless the 3rd-party app is the default IME or is the app that currently has focus. - [C-0-2] MUST clear clipboard data at most 60 minutes after it has last been placed in a clipboard or read from a clipboard.
- [C-0-1] MUST NOT return a clipped data from the clipboard (eg via the
9.11 Keys and Credentials : Updates to the secure lock screen requirements, including the addition of ECDH and 3DES to crypto algorithms.
See revision
When the device implementation supports a secure lock screen, it:
- [C-1-2] MUST have implementations of RSA, AES, ECDSA, ECDH (if IKeyMintDevice is supported), 3DES, and HMAC cryptographic algorithms and MD5, SHA1, and SHA-2 family hash functions to properly support the Android Keystore system's supported algorithms in an area that is securely isolated from the code running on the kernel and above. Secure isolation MUST block all potential mechanisms by which kernel or userspace code might access the internal state of the isolated environment, including DMA. The upstream Android Open Source Project (AOSP) meets this requirement by using the Trusty implementation, but another ARM TrustZone-based solution or a third-party reviewed secure implementation of a proper hypervisor-based isolation are alternative options.
9.11.1 Secure Lock Screen, Authentication, and Virtual Devices : Added requirements section for virtual devices and authentication transfers.
See revision
If device implementations add or modify the authentication methods to unlock the lock screen and a new authentication method is based on a physical token or the location:
- [C-6-3] The user MUST be challenged for one of the recommended primary authentication methods (egPIN, pattern, password) at least once every 4 hours or less. When a physical token meets the requirements for TrustAgent implementations in CX, timeout restrictions defined in C-9-5 apply instead.
If device implementations allow applications to create secondary virtual displays and do not support associated input events, such as via
VirtualDeviceManager
, they:- [C-9-1] MUST lock these secondary virtual display(s) when the device's default display is locked, and unlock these secondary virtual display(s) when the device's default display is unlocked.
If device implementations allow applications to create secondary virtual displays and support associated input events, such as via VirtualDeviceManager , they:
- [C-10-1] MUST support separate lock states per virtual device
- [C-10-2] MUST disconnect all virtual devices upon idle timeout
- [C-10-3] MUST have an idle timeout
- [C-10-4] MUST lock all displays when the user initiates a lockdown , including via the lockdown user affordance required for handheld devices (see Section 2.2.5[9.11/H-1-2] )
- [C-10-5] MUST have separate virtual device instances per user
- [C-10-6] MUST disable the creation of associated input events via
VirtualDeviceManager
when indicated byDevicePolicyManager.setNearbyAppStreamingPolicy
- [C-10-7] MUST use a separate clipboard solely for each virtual device (or disable the clipboard for virtual devices)
- [C-10-11] MUST disable authentication UI on virtual devices, including knowledge factor entry and biometric prompt
- [C-10-12] MUST restrict intents initiated from a virtual device to display only on the same virtual device
- [C-10-13] MUST not use a virtual device lock state as user authentication authorization with the Android Keystore System. See
KeyGenParameterSpec.Builder.setUserAuthentication*
.
When device implementations allow the user to transfer the primary authentication knowledge-factor from a source device to a target device, such as for initial setup of the target device, they:
- [C-11-1] MUST encrypt the knowledge-factor with protection guarantees similar to those described in the Google Cloud Key Vault Service security whitepaper when transferring the knowledge-factor from the source device to the target device such that the knowledge-factor cannot be remotely decrypted or used to remotely unlock either device.
- [C-11-2] MUST, on the source device , ask the user to confirm the knowledge-factor of the source device before transferring the knowledge-factor to the target device.
- [C-11-3] MUST, on a target device lacking any set primary authentication knowledge-factor, ask the user to confirm a transferred knowledge-factor on the target device before setting that knowledge-factor as the primary authentication knowledge-factor for the target device and before making available any data transferred from a source device.
If device implementations have a secure lock screen and include one or more trust agents, which call the
TrustAgentService.grantTrust()
System API with theFLAG_GRANT_TRUST_TEMPORARY_AND_RENEWABLE
flag they:- [C-12-1] MUST only call
grantTrust()
with the flag when connected to a proximate physical device with a lockscreen of its own, and when the user has authenticated their identity against that lockscreen. Proximate devices can use on-wrist or on-body detection mechanisms after a one-time user unlock to satisfy the user authentication requirement. - [C-12-2] MUST put the device implementation into the
TrustState.TRUSTABLE
state when the screen is turned off (such as via a button press or display time out) and the TrustAgent has not revoked trust. The AOSP satisfies this requirement. - [C-12-3] MUST only move the device from
TrustState.TRUSTABLE
to theTrustState.TRUSTED
state if the TrustAgent is still granting trust based on the requirements in C-12-1. - [C-12-4] MUST call
TrustManagerService.revokeTrust()
after a maximum of 24 hours from granting trust, an 8 hour idle window, or when the underlying connection to the proximate physical device is lost.
If device implementations allow applications to create secondary virtual displays and support associated input events such as via VirtualDeviceManager and the displays are not marked with VIRTUAL_DISPLAY_FLAG_SECURE, they:
- [C-13-8] MUST block activities with the attribute android:canDisplayOnRemoteDevices or the meta-data android.activity.can_display_on_remote_devices set to false from being started on the virtualdevice.
- [C-13-9] MUST block activities which do not explicitly enable streaming and which indicate they show sensitive content, including via SurfaceView#setSecure, FLAG_SECURE, or SYSTEM_FLAG_HIDE_NON_SYSTEM_OVERLAY_WINDOWS, from being started on the virtual device.
- [C-13-10] MUST disable installation of apps initiated from virtual devices.
9.11.2 Strongbox : Making insider attack resistance (IAR) a necessary requirement.
See revision
To validate compliance with [C-1-3] through [C-1-9], device implementations:
- [C-SR] are STRONGLY RECOMMENDED to provide insider attack resistance (IAR), which means that an insider with access to firmware signing keys cannot produce firmware that causes the StrongBox to leak secrets, to bypass functional security requirements or otherwise enable access to sensitive user data. The recommended way to implement IAR is to allow firmware updates only when the primary user password is provided via the IAuthSecret HAL. IAR will become a MUST requirement in Android 14 (AOSP experimental).
9.11.3 Identity Credential : Added information about the Identity Credential system reference implementation.
See revision
The Identity Credential System is defined and achieved by implementing all APIs in the
android.security.identity.*
package. These APIs allows app developers to store and retrieve user identity documents. Device implementations:The upstream Android Open Source Project provides a reference implementation of a trusted application ( libeic ) that can be used to implement the Identity Credential system.
9.11.4 ID Attestation : Added a section for ID attestation requirement.
See revision
9.11.4. ID Attestation
Device implementations MUST support ID attestation .
9.17 Android Virtualization Framework : Added a requirements section for Android Virtualization Framework.
See revision
9.17. Android Virtualization Framework
If the device implements support for the Android Virtualization Framework APIs (
android.system.virtualmachine.*
), the Android host:- [C-1-1] MUST support all the APIs defined by the
android.system.virtualmachine.*
package. - [C-1-2] MUST NOT modify the Android SELinux and permission model for the management of Protected Virtual Machines.
- [C-1-3] MUST NOT modify, omit, or replace the neverallow rules present within the system/sepolicy provided in the upstream Android Open Source Project (AOSP) and the policy MUST compile with all neverallow rules present.
- [C-1-4] MUST NOT allow untrusted code (eg 3p apps) to create and run a Protected Virtual Machine. Note: This might change in future Android releases.
- [C-1-5] MUST NOT allow a Protected Virtual Machine to execute code that is not part of the factory image or their updates. Anything that is not covered by Android Verified Boot (eg files downloaded from the Internet or sideloaded) MUST NOT be allowed to be run in a Protected Virtual Machine.
If the device implements support for the Android Virtualization Framework APIs (
android.system.virtualmachine.*
), then any Protected Virtual Machine instance:- [C-2-1] MUST be able to run all operating systems available in the virtualization APEX in a Protected Virtual Machine.
- [C-2-2] MUST NOT allow a Protected Virtual Machine to run an operating system that is not signed by the device implementor or OS vendor.
- [C-2-3] MUST NOT allow a Protected Virtual Machine to execute data as code (eg SELinux neverallow execmem).
- [C-2-4] MUST NOT modify, omit, or replace the neverallow rules present within the system/sepolicy/microdroid provided in the upstream Android Open Source Project (AOSP).
- [C-2-5] MUST implement Protected Virtual Machine defense-in-depth mechanisms (eg SELinux for pVMs) even for non-Microdroid operating systems.
- [C-2-6] MUST ensure that the pVM firmware refuses to boot if it cannot verify the initial image.
- [C-2-7] MUST ensure that the pVM firmware refuses to boot if the integrity of the instance.img is compromised.
If the device implements support for the Android Virtualization Framework APIs (
android.system.virtualmachine.*
), then the hypervisor:- [C-3-1] MUST NOT allow any pVM to have access to a page belonging to another entity (ie other pVM or hypervisor), unless explicitly shared by the page owner. This includes the host VM. This applies to both CPU and DMA accesses.
- [C-3-2] MUST wipe a page after it is used by a VM and before it is returned to the host (eg the pVM is destroyed).
- [C-3-3] MUST ensure that the pVM firmware is loaded and executed prior to any code in a pVM.
- [C-3-4] MUST ensure that BCC and CDIs provided to a pVM instance can only be derived by that particular instance.
If the device implements support for the Android Virtualization Framework APIs, then across all areas:
- [C-4-1] MUST NOT provide functionality to a pVM that allows bypassing the Android Security Model.
If the device implements support for the Android Virtualization Framework APIs, then:
- [C-5-1] MUST support Isolated Compilation of an ART runtime update.
If the device implements support for the Android Virtualization Framework APIs, then for Key Management:
- [C-6-1] MUST root DICE chain at a point that the user cannot modify, even on unlocked devices. (To ensure it cannot be spoofed).
- [C-6-2] MUST do DICE properly ie provide the correct values. But it might not have to go to that level of detail.
- [C-1-1] MUST support all the APIs defined by the
এই পৃষ্ঠার কন্টেন্ট ও কোডের নমুনাগুলি Content License-এ বর্ণিত লাইসেন্সের অধীনস্থ। Java এবং OpenJDK হল Oracle এবং/অথবা তার অ্যাফিলিয়েট সংস্থার রেজিস্টার্ড ট্রেডমার্ক।
2023-03-30 UTC-তে শেষবার আপডেট করা হয়েছে।
[{ "type": "thumb-down", "id": "missingTheInformationINeed", "label":"এতে আমার প্রয়োজনীয় তথ্য নেই" },{ "type": "thumb-down", "id": "tooComplicatedTooManySteps", "label":"খুব জটিল / অনেক ধাপ" },{ "type": "thumb-down", "id": "outOfDate", "label":"পুরনো" },{ "type": "thumb-down", "id": "translationIssue", "label":"অনুবাদ সংক্রান্ত সমস্যা" },{ "type": "thumb-down", "id": "samplesCodeIssue", "label":"নমুনা / কোড সংক্রান্ত সমস্যা" },{ "type": "thumb-down", "id": "otherDown", "label":"অন্যান্য" }] [{ "type": "thumb-up", "id": "easyToUnderstand", "label":"সহজে বোঝা যায়" },{ "type": "thumb-up", "id": "solvedMyProblem", "label":"আমার সমস্যার সমাধান হয়েছে" },{ "type": "thumb-up", "id": "otherUp", "label":"অন্যান্য" }] - [C-2-1] MUST return