تعریف سازگاری اندروید 9

1. معرفی

این سند شرایطی را که باید برای سازگاری دستگاه ها با اندروید 9 رعایت شود، برشمرده است.

استفاده از "باید"، "نباید"، "لازم"، "باید"، "نباید"، "باید"، "نباید"، "توصیه شده"، "ممکن است" و "اختیاری" طبق IETF است. استاندارد تعریف شده در RFC2119 .

همانطور که در این سند استفاده می‌شود، «پیاده‌کننده دستگاه» یا «پیاده‌گر» شخص یا سازمانی است که راه‌حل سخت‌افزار/نرم‌افزاری را با Android 9 توسعه می‌دهد. «پیاده‌سازی دستگاه» یا «پیاده‌سازی» راه‌حل سخت‌افزار/نرم‌افزاری است که به این شکل توسعه یافته است.

برای اینکه پیاده‌سازی‌های دستگاه با Android 9 سازگار در نظر گرفته شوند، باید الزامات ارائه‌شده در این تعریف سازگاری، از جمله هر سندی که از طریق مرجع گنجانده شده‌اند، داشته باشند.

در مواردی که این تعریف یا تست‌های نرم‌افزاری توضیح داده شده در بخش 10 بی‌صدا، مبهم یا ناقص باشد، این مسئولیت اجرای دستگاه است که از سازگاری با پیاده‌سازی‌های موجود اطمینان حاصل کند.

به همین دلیل، پروژه متن باز اندروید هم مرجع و هم پیاده سازی ترجیحی اندروید است. به اجراکنندگان دستگاه اکیداً توصیه می‌شود که پیاده‌سازی‌های خود را تا حد امکان بر اساس کد منبع «بالادست» موجود در پروژه منبع باز Android قرار دهند. در حالی که برخی از مؤلفه‌ها می‌توانند به صورت فرضی با پیاده‌سازی‌های جایگزین جایگزین شوند، اکیداً توصیه می‌شود که از این رویه پیروی نکنید، زیرا گذراندن آزمون‌های نرم‌افزار به طور قابل‌توجهی دشوارتر می‌شود. این مسئولیت پیاده‌کننده است که از سازگاری کامل رفتاری با پیاده‌سازی استاندارد Android، از جمله و فراتر از مجموعه تست سازگاری اطمینان حاصل کند. در نهایت، توجه داشته باشید که تعویض و اصلاح برخی از اجزا به صراحت توسط این سند ممنوع است.

بسیاری از منابع مرتبط با این سند به طور مستقیم یا غیرمستقیم از Android SDK مشتق شده اند و از نظر عملکردی با اطلاعات موجود در اسناد آن SDK یکسان خواهند بود. در هر موردی که این تعریف سازگاری یا مجموعه تست سازگاری با مستندات SDK مخالف باشد، اسناد SDK معتبر تلقی می‌شوند. هر گونه جزئیات فنی ارائه شده در منابع مرتبط در سراسر این سند با گنجاندن بخشی از این تعریف سازگاری در نظر گرفته می شود.

1.1 ساختار سند

1.1.1. الزامات بر اساس نوع دستگاه

بخش 2 شامل تمام الزاماتی است که برای یک نوع دستگاه خاص اعمال می شود. هر بخش فرعی از بخش 2 به نوع خاصی از دستگاه اختصاص دارد.

تمام الزامات دیگر، که به طور جهانی برای هر پیاده سازی دستگاه Android اعمال می شود، در بخش های بعد از بخش 2 فهرست شده است. این الزامات به عنوان "نیازهای اصلی" در این سند ذکر شده است.

1.1.2. شناسه مورد نیاز

شناسه مورد نیاز برای الزامات MUST اختصاص داده شده است.

  • شناسه فقط برای الزامات MUST اختصاص داده شده است.
  • الزامات STRONGLY RECOMMENDED به عنوان [SR] علامت گذاری شده اند اما شناسه اختصاص داده نشده است.
  • شناسه شامل موارد زیر است: شناسه نوع دستگاه - شناسه وضعیت - شناسه مورد نیاز (به عنوان مثال C-0-1).

هر شناسه به صورت زیر تعریف می شود:

  • شناسه نوع دستگاه (بیشتر را در 2. انواع دستگاه ببینید)
    • C: Core (الزاماتی که برای اجرای هر دستگاه Android اعمال می شود)
    • H: دستگاه Android Handheld
    • T: دستگاه Android TV
    • A: پیاده سازی Android Automotive
    • تب: پیاده سازی تبلت اندروید
  • شناسه وضعیت
    • هنگامی که شرط بدون قید و شرط باشد، این شناسه به عنوان 0 تنظیم می شود.
    • وقتی شرط شرطی است، 1 برای شرط اول اختصاص داده می شود و عدد در همان بخش و همان نوع دستگاه، 1 افزایش می یابد.
  • شناسه مورد نیاز
    • این شناسه از 1 شروع می شود و در همان بخش و شرایط یکسان 1 افزایش می یابد.

1.1.3. شناسه مورد نیاز در بخش 2

شناسه مورد نیاز در بخش 2 با شناسه بخش مربوطه شروع می شود که با شناسه مورد نیاز شرح داده شده در بالا دنبال می شود.

  • شناسه در بخش 2 شامل: شناسه بخش / شناسه نوع دستگاه - شناسه شرایط - شناسه مورد نیاز (به عنوان مثال 7.4.3/A-0-1).

2. انواع دستگاه

در حالی که پروژه منبع باز Android یک پشته نرم افزاری را ارائه می دهد که می تواند برای انواع مختلف دستگاه ها و فاکتورهای شکل استفاده شود، چند نوع دستگاه وجود دارد که اکوسیستم توزیع برنامه نسبتاً بهتری دارند.

این بخش انواع دستگاه ها و الزامات و توصیه های اضافی قابل اجرا برای هر نوع دستگاه را شرح می دهد.

همه پیاده‌سازی‌های دستگاه Android که در هیچ یک از انواع دستگاه‌های توصیف‌شده قرار نمی‌گیرند، همچنان باید همه الزامات موجود در بخش‌های دیگر این تعریف سازگاری را برآورده کنند.

2.1 تنظیمات دستگاه

برای تفاوت‌های عمده در پیکربندی سخت‌افزار بر اساس نوع دستگاه، الزامات خاص دستگاه را که در این بخش دنبال می‌شود، ببینید.

2.2. الزامات دستی

دستگاه Android Handheld به یک پیاده سازی دستگاه اندرویدی اشاره دارد که معمولاً با نگه داشتن آن در دست استفاده می شود، مانند پخش کننده mp3، تلفن یا تبلت.

پیاده‌سازی‌های دستگاه اندروید در صورتی که تمام معیارهای زیر را داشته باشند به عنوان دستی طبقه‌بندی می‌شوند:

  • منبع تغذیه ای داشته باشید که تحرک را فراهم می کند، مانند باتری.
  • اندازه صفحه نمایش مورب فیزیکی در محدوده 2.5 تا 8 اینچ داشته باشید.

الزامات اضافی در بقیه این بخش مختص پیاده سازی دستگاه Android Handheld است.

توجه: الزاماتی که برای دستگاه‌های تبلت Android اعمال نمی‌شوند با علامت * مشخص می‌شوند.

2.2.1. سخت افزار

پیاده سازی دستگاه های دستی:

  • [ 7.1 .1.1/H-0-1] باید صفحه نمایش حداقل 2.5 اینچ در اندازه مورب فیزیکی داشته باشد.
  • [ 7.1 .1.3/H-SR] قویاً توصیه می شود تا به کاربران امکان تغییر اندازه نمایشگر را ارائه دهند. (تراکم صفحه)

اگر پیاده‌سازی‌های دستگاه دستی از طریق Configuration.isScreenHdr() از نمایشگرهای محدوده دینامیکی بالا پشتیبانی می‌کنند، آنها:

  • [ 7.1 .4.5/H-1-1 VK_EXT_hdr_metadata باید پشتیبانی از EGL_EXT_gl_colorspace_bt2020_pq ، EGL_EXT_surface_SMPTE2086_metadata ، EGL_EXT_surface_CTA861_3_metadata ، wap. پسوندهای VK_EXT_swapchain_colorspace .

پیاده سازی دستگاه های دستی:

  • [ 7.1 .5/H-0-1] باید شامل پشتیبانی از حالت سازگاری برنامه های قدیمی همانطور که توسط کد منبع باز بالادستی Android پیاده سازی شده باشد. به این معنا که پیاده‌سازی دستگاه نباید محرک‌ها یا آستانه‌هایی را که در آن حالت سازگاری فعال می‌شود، تغییر دهند، و نباید رفتار خود حالت سازگاری را تغییر دهند.
  • [ 7.2 .1/H-0-1] باید شامل پشتیبانی از برنامه های کاربردی ویرایشگر روش ورودی (IME) شخص ثالث باشد.
  • [ 7.2 .3/H-0-1] باید توابع Home، Recents و Back را ارائه دهد.
  • [ 7.2 .3/H-0-2] باید هر دو رویداد فشار عادی و طولانی عملکرد Back ( KEYCODE_BACK ) را به برنامه پیش زمینه ارسال کند. این رویدادها نباید توسط سیستم مصرف شوند و می توانند توسط خارج از دستگاه Android (به عنوان مثال صفحه کلید سخت افزاری خارجی متصل به دستگاه Android) ایجاد شوند.
  • [ 7.2.4 /H-0-1] باید از ورودی صفحه لمسی پشتیبانی کند.
  • [ 7.2 .4/H-SR] برای راه‌اندازی برنامه کمکی انتخاب شده توسط کاربر، به عبارت دیگر برنامه‌ای که VoiceInteractionService یا فعالیتی که ACTION_ASSIST با فشار طولانی KEYCODE_MEDIA_PLAY_PAUSE یا KEYCODE_HEADSETHOOK انجام نمی‌دهد، اجرا می‌کند، به شدت توصیه می‌شود. آن رویدادهای مطبوعاتی طولانی را مدیریت کنید.
  • [ 7.3 .1/H-SR] اکیداً توصیه می‌شود که شتاب‌سنج 3 محوره را در خود جای دهد.

اگر پیاده سازی های دستگاه دستی شامل شتاب سنج 3 محوره باشد، آنها:

  • [ 7.3 .1/H-1-1] باید بتواند رویدادها را تا فرکانس حداقل 100 هرتز گزارش کند.

اگر پیاده سازی های دستگاه دستی شامل ژیروسکوپ باشد، آنها:

  • [ 7.3 .4/H-1-1] باید بتواند رویدادها را تا فرکانس حداقل 100 هرتز گزارش کند.

پیاده سازی های دستگاه دستی که می توانند تماس صوتی برقرار کنند و هر مقداری غیر از PHONE_TYPE_NONE را در getPhoneType نشان دهند:

  • [ 7.3 .8/H] باید دارای حسگر مجاورت باشد.

پیاده سازی دستگاه های دستی:

  • [ 7.3 0.12/H-SR] برای پشتیبانی از حسگر حالت با 6 درجه آزادی توصیه می شود.
  • [ 7.4 .3/H] باید شامل پشتیبانی از بلوتوث و بلوتوث LE باشد.

اگر پیاده سازی های دستگاه دستی شامل یک اتصال اندازه گیری شده باشد، آنها:

  • [ 7.4 .7/H-1-1] باید حالت ذخیره داده را ارائه دهد.

پیاده سازی دستگاه های دستی:

  • [ 7.6 .1/H-0-1] باید حداقل 4 گیگابایت فضای ذخیره سازی غیرفرار برای داده های خصوصی برنامه (معروف به پارتیشن "/data") در دسترس باشد.
  • [ 7.6 .1/H-0-2] باید برای ActivityManager.isLowRamDevice() "true" را زمانی که کمتر از 1 گیگابایت حافظه در اختیار هسته و فضای کاربر وجود دارد، برگرداند.

اگر پیاده‌سازی‌های دستگاه دستی فقط از ABI 32 بیتی پشتیبانی می‌کنند:

  • [ 7.6 .1/H-1-1] حافظه موجود برای هسته و فضای کاربر باید حداقل 416 مگابایت باشد اگر نمایشگر پیش فرض از وضوح فریم بافر تا qHD (مثلاً FWVGA) استفاده می کند.

  • [ 7.6 .1/H-2-1] حافظه موجود برای هسته و فضای کاربر باید حداقل 592 مگابایت باشد اگر نمایشگر پیش‌فرض از وضوح فریم بافر تا HD+ استفاده می‌کند (مثلاً HD، WSVGA).

  • [ 7.6 .1/H-3-1] حافظه موجود برای هسته و فضای کاربر باید حداقل 896 مگابایت باشد اگر صفحه نمایش پیش فرض از وضوح فریم بافر تا FHD استفاده می کند (به عنوان مثال WSXGA+).

  • [ 7.6 .1/H-4-1] اگر صفحه نمایش پیش فرض از وضوح فریم بافر تا QHD (به عنوان مثال QWXGA) استفاده می کند، حافظه موجود برای هسته و فضای کاربر باید حداقل 1344 مگابایت باشد.

اگر پیاده‌سازی‌های دستگاه دستی از هر ABI 64 بیتی (با یا بدون هیچ ABI 32 بیتی) پشتیبانی می‌کنند:

  • [ 7.6 .1/H-5-1] حافظه موجود برای هسته و فضای کاربر باید حداقل 816 مگابایت باشد اگر نمایشگر پیش‌فرض از وضوح فریم بافر تا qHD (به عنوان مثال FWVGA) استفاده می‌کند.

  • [ 7.6 .1/H-6-1] حافظه موجود برای هسته و فضای کاربر باید حداقل 944 مگابایت باشد اگر نمایشگر پیش‌فرض از وضوح فریم بافر تا HD+ استفاده می‌کند (مثلاً HD، WSVGA).

  • [ 7.6 .1/H-7-1] حافظه موجود برای هسته و فضای کاربر باید حداقل 1280 مگابایت باشد اگر صفحه نمایش پیش فرض از وضوح فریم بافر تا FHD استفاده می کند (به عنوان مثال WSXGA+).

  • [ 7.6 .1/H-8-1] حافظه موجود برای هسته و فضای کاربر باید حداقل 1824 مگابایت باشد اگر صفحه نمایش پیش فرض از وضوح فریم بافر تا QHD (مثلا QWXGA) استفاده می کند.

توجه داشته باشید که "حافظه در دسترس برای هسته و فضای کاربر" در بالا به فضای حافظه ارائه شده به اضافه هر حافظه ای که قبلاً به اجزای سخت افزاری مانند رادیو، ویدئو و غیره اختصاص داده شده است که در پیاده سازی های دستگاه تحت کنترل هسته نیستند، اشاره دارد.

اگر پیاده‌سازی‌های دستگاه دستی شامل کمتر یا مساوی 1 گیگابایت حافظه در دسترس هسته و فضای کاربر باشد، آنها:

  • [ 7.6 .1/H-9-1] باید پرچم ویژگی android.hardware.ram.low را اعلام کند.
  • [ 7.6 .1/H-9-2] باید حداقل 1.1 گیگابایت فضای ذخیره سازی غیر فرار برای داده های خصوصی برنامه (معروف به پارتیشن "/data") داشته باشد.

اگر پیاده سازی های دستگاه دستی شامل بیش از 1 گیگابایت حافظه در دسترس هسته و فضای کاربر باشد، آنها:

  • [ 7.6 .1/H-10-1] باید حداقل 4 گیگابایت فضای ذخیره سازی غیر فرار برای داده های خصوصی برنامه (معروف به پارتیشن "/data") در دسترس باشد.
  • باید پرچم ویژگی android.hardware.ram.normal را اعلام کند.

پیاده سازی دستگاه های دستی:

  • [ 7.6 .2/H-0-1] نباید یک برنامه ذخیره سازی مشترک کوچکتر از 1 گیگابایت ارائه کند.
  • [ 7.7.1 /H] باید دارای یک درگاه USB باشد که از حالت جانبی پشتیبانی می کند.

اگر پیاده سازی های دستگاه دستی شامل یک پورت USB باشد که از حالت جانبی پشتیبانی می کند، آنها:

  • [ 7.7 .1/H-1-1] باید API Android Open Accessory (AOA) را پیاده سازی کند.

پیاده سازی دستگاه های دستی:

  • [ 7.8 .1/H-0-1] باید دارای میکروفون باشد.
  • [ 7.8 .2/H-0-1] باید یک خروجی صدا داشته باشد و android.hardware.audio.output اعلام کند.

اگر پیاده‌سازی‌های دستگاه دستی قادر به برآورده کردن تمام الزامات عملکرد برای پشتیبانی از حالت VR و شامل پشتیبانی از آن باشند، آنها:

  • [ 7.9 .1/H-1-1] باید پرچم ویژگی android.hardware.vr.high_performance را اعلام کند.
  • [ 7.9 .1/H-1-2] باید شامل برنامه ای باشد که android.service.vr.VrListenerService را اجرا می کند که می تواند توسط برنامه های VR از طریق android.app.Activity#setVrModeEnabled فعال شود.

2.2.2. چند رسانه ای

پیاده سازی دستگاه دستی باید از رمزگذاری صوتی زیر پشتیبانی کند:

  • [ 5.1.1 /H-0-1] AMR-NB
  • [ 5.1 .1/H-0-2] AMR-WB
  • [ 5.1 .1/H-0-3] نمایه AAC MPEG-4 (AAC LC)
  • [ 5.1 .1/H-0-4] MPEG-4 HE AAC Profile (AAC+)
  • [ 5.1 .1/H-0-5] AAC ELD (AAC تاخیر کم تقویت شده)

پیاده سازی دستگاه دستی باید از رمزگشایی صوتی زیر پشتیبانی کند:

پیاده سازی دستگاه های دستی باید از رمزگذاری ویدیوی زیر پشتیبانی کند و آن را برای برنامه های شخص ثالث در دسترس قرار دهد:

  • [ 5.2 /H-0-1] H.264 AVC
  • [ 5.2 /H-0-2] VP8

پیاده سازی دستگاه های دستی باید از رمزگشایی ویدیوی زیر پشتیبانی کند:

  • [ 5.3 /H-0-1] H.264 AVC
  • [ 5.3 /H-0-2] H.265 HEVC
  • [ 5.3 /H-0-3] MPEG-4 SP
  • [ 5.3 /H-0-4] VP8
  • [ 5.3 /H-0-5] VP9

2.2.3. نرم افزار

پیاده سازی دستگاه های دستی:

  • [ 3.2.3.1 /H-0-1] باید برنامه‌ای داشته باشد که اهداف ACTION_GET_CONTENT ، ACTION_OPEN_DOCUMENT ، ACTION_OPEN_DOCUMENT_TREE ، و ACTION_CREATE_DOCUMENT را همانطور که در اسناد SDK توضیح داده شده است، مدیریت کند و با استفاده از امکان دسترسی به DocumentsProvider API اطلاعات کاربر را فراهم کند.
  • [ 3.4 .1/H-0-1] باید اجرای کاملی از android.webkit.Webview API را ارائه دهد.
  • [ 3.4 .2/H-0-1] باید شامل یک برنامه مرورگر مستقل برای مرور وب کاربران عمومی باشد.
  • [ 3.8 .1/H-SR] برای اجرای یک راه‌انداز پیش‌فرض که از پین کردن میان‌برها، ویجت‌ها و ویژگی‌های ویجت در برنامه پشتیبانی می‌کند، به شدت توصیه می‌شود.
  • [ 3.8 .1/H-SR] برای پیاده‌سازی یک راه‌انداز پیش‌فرض که دسترسی سریع به میانبرهای اضافی ارائه‌شده توسط برنامه‌های شخص ثالث را از طریق ShortcutManager API فراهم می‌کند، اکیداً توصیه می‌شود.
  • [ 3.8 .1/H-SR] اکیداً توصیه می‌شود یک برنامه راه‌انداز پیش‌فرض گنجانده شود که نشان‌هایی را برای نمادهای برنامه نشان می‌دهد.
  • [ 3.8 .2/H-SR] برای پشتیبانی از ویجت های برنامه شخص ثالث به شدت توصیه می شود.
  • [ 3.8 .3/H-0-1] باید به برنامه های شخص ثالث اجازه دهد تا از طریق کلاس های Notification و NotificationManager API کاربران را از رویدادهای قابل توجه مطلع کنند.
  • [ 3.8 .3/H-0-2] باید از اعلان های غنی پشتیبانی کند.
  • [ 3.8 .3/H-0-3] باید از اعلان‌های heads-up پشتیبانی کند.
  • [ 3.8 .3/H-0-4] باید شامل یک سایه اعلان باشد که به کاربر امکان کنترل مستقیم (مثلاً پاسخ، به تعویق انداختن، رد کردن، مسدود کردن) اعلان‌ها را از طریق هزینه‌های کاربر مانند دکمه‌های عمل یا پانل کنترل همانطور که اجرا می‌کند، می‌دهد. در AOSP
  • [ 3.8 .3/H-0-5] باید انتخاب های ارائه شده از طریق RemoteInput.Builder setChoices() را در سایه اعلان نمایش دهد.
  • [ 3.8 .3/H-SR] اکیداً توصیه می شود که اولین انتخاب ارائه شده از طریق RemoteInput.Builder setChoices() در سایه اعلان و بدون تعامل اضافی با کاربر نمایش داده شود.
  • [ 3.8 .3/H-SR] اکیداً توصیه می‌شود که همه انتخاب‌های ارائه شده از طریق RemoteInput.Builder setChoices() در سایه اعلان‌ها هنگامی که کاربر همه اعلان‌ها را در سایه اعلان گسترش می‌دهد، نمایش داده شود.
  • [ 3.8 .4/H-SR] به شدت توصیه می شود که یک دستیار را روی دستگاه اجرا کنید تا عمل Assist را انجام دهد.

اگر پیاده‌سازی‌های دستگاه دستی از عمل Assist پشتیبانی می‌کنند، آنها:

  • [ 3.8 .4/H-SR] اکیداً توصیه می شود از فشار طولانی کلید HOME به عنوان تعامل تعیین شده برای راه اندازی برنامه کمکی همانطور که در بخش 7.2.3 توضیح داده شده است، استفاده کنید. باید برنامه کمکی انتخاب شده توسط کاربر را راه‌اندازی کند، به عبارت دیگر برنامه‌ای که VoiceInteractionService یا فعالیتی را که هدف ACTION_ASSIST را مدیریت می‌کند، اجرا می‌کند.

اگر پیاده‌سازی‌های دستگاه Android Handheld از صفحه قفل پشتیبانی می‌کنند، آنها:

  • [ 3.8 .10/H-1-1] باید اعلان‌های صفحه قفل از جمله الگوی اعلان رسانه را نمایش دهد.

اگر پیاده سازی های دستگاه دستی از صفحه قفل ایمن پشتیبانی می کنند، آنها:

  • [ 3.9 /H-1-1] باید طیف کاملی از خط‌مشی‌های مدیریت دستگاه را که در مستندات Android SDK تعریف شده است، اجرا کند.
  • [ 3.9 /H-1-2] باید پشتیبانی از نمایه های مدیریت شده را از طریق پرچم ویژگی android.software.managed_users اعلام کند، به جز زمانی که دستگاه به گونه ای پیکربندی شده است که خود را به عنوان یک دستگاه RAM کم گزارش کند یا به گونه ای که داخلی را اختصاص دهد ( غیر قابل جابجایی) ذخیره سازی به عنوان فضای ذخیره مشترک.

پیاده سازی دستگاه های دستی:

  • [ 3.10 /H-0-1] باید از خدمات دسترسی شخص ثالث پشتیبانی کند.
  • [ 3.10 /H-SR] اکیداً توصیه می‌شود که سرویس‌های دسترس‌پذیری را در دستگاه از قبل بارگیری کنند که با عملکردهای دسترسی سوئیچ و TalkBack (برای زبان‌هایی که توسط موتور از پیش نصب شده تبدیل متن به گفتار پشتیبانی می‌شوند) قابل مقایسه یا فراتر از آن است. پروژه منبع .
  • [ 3.11 /H-0-1] باید از نصب موتورهای TTS شخص ثالث پشتیبانی کند.
  • [ 3.11 /H-SR] اکیداً توصیه می‌شود که موتور TTS را شامل شود که از زبان‌های موجود در دستگاه پشتیبانی می‌کند.
  • [ 3.13 /H-SR] اکیداً توصیه می‌شود که شامل یک مؤلفه رابط کاربری تنظیمات سریع باشد.

اگر پیاده‌سازی‌های دستگاه دستی Android پشتیبانی از FEATURE_BLUETOOTH یا FEATURE_WIFI را اعلام کنند، آنها:

  • [ 3.16 /H-1-1] باید از ویژگی جفت شدن دستگاه همراه پشتیبانی کند.

2.2.4. عملکرد و قدرت

  • [ 8.1 /H-0-1] تأخیر فریم ثابت . تأخیر ناسازگار فریم یا تأخیر در ارائه فریم‌ها نباید بیشتر از 5 فریم در ثانیه اتفاق بیفتد و باید کمتر از 1 فریم در ثانیه باشد.
  • [ 8.1 /H-0-2] تأخیر رابط کاربری . پیاده‌سازی‌های دستگاه باید با پیمایش فهرستی از 10 هزار ورودی فهرست که توسط مجموعه تست سازگاری Android (CTS) در کمتر از 36 ثانیه تعریف شده است، تجربه کاربر با تأخیر کم را تضمین کنند.
  • [ 8.1 /H-0-3] تعویض وظیفه . هنگامی که چندین برنامه راه اندازی شده اند، راه اندازی مجدد یک برنامه از قبل در حال اجرا پس از راه اندازی باید کمتر از 1 ثانیه طول بکشد.

پیاده سازی دستگاه های دستی:

  • [ 8.2 /H-0-1] باید عملکرد نوشتن متوالی حداقل 5 مگابایت بر ثانیه را تضمین کند.
  • [ 8.2 /H-0-2] باید از عملکرد نوشتن تصادفی حداقل 0.5 مگابایت بر ثانیه اطمینان حاصل کند.
  • [ 8.2 /H-0-3] باید عملکرد خواندن متوالی حداقل 15 مگابایت بر ثانیه را تضمین کند.
  • [ 8.2 /H-0-4] باید عملکرد خواندن تصادفی حداقل 3.5 مگابایت بر ثانیه را تضمین کند.

اگر پیاده‌سازی‌های دستگاه دستی شامل ویژگی‌هایی برای بهبود مدیریت انرژی دستگاه باشد که در AOSP گنجانده شده است یا ویژگی‌های موجود در AOSP را گسترش دهد، آنها:

  • [ 8.3 /H-1-1] باید توانایی کاربر را برای فعال و غیرفعال کردن ویژگی صرفه جویی باتری فراهم کند.
  • [ 8.3 /H-1-2] باید برای نمایش همه برنامه‌هایی که از حالت‌های ذخیره انرژی برنامه و Doze معاف هستند، امکانات لازم را برای کاربر فراهم کند.

پیاده سازی دستگاه های دستی:

  • [ 8.4 /H-0-1] باید یک نمایه قدرت برای هر جزء ارائه کند که مقدار مصرف فعلی را برای هر جزء سخت افزاری و تخلیه تقریبی باتری ناشی از قطعات در طول زمان، همانطور که در سایت پروژه منبع باز Android مستند شده است، تعریف کند.
  • [ 8.4 /H-0-2] باید تمام مقادیر مصرف برق را بر حسب میلی آمپر ساعت (mAh) گزارش کند.
  • [ 8.4 /H-0-3] باید مصرف انرژی CPU را در هر UID فرآیند گزارش کند. پروژه منبع باز Android از طریق اجرای ماژول هسته uid_cputime این نیاز را برآورده می کند.
  • [ 8.4 /H-0-4] باید این مصرف انرژی را از طریق دستور adb shell dumpsys batterystats shell در اختیار توسعه‌دهنده برنامه قرار دهد.
  • [ 8.4 /H] باید به خود مؤلفه سخت افزار نسبت داده شود اگر نمی توان مصرف برق جزء سخت افزاری را به یک برنامه نسبت داد.

اگر پیاده سازی های دستگاه دستی شامل یک صفحه نمایش یا خروجی ویدیو باشد، آنها:

  • [ 8.4 /H-1-1] باید به قصد android.intent.action.POWER_USAGE_SUMMARY احترام بگذارد و منوی تنظیماتی را نمایش دهد که این میزان مصرف انرژی را نشان می دهد.

2.2.5. مدل امنیتی

پیاده سازی دستگاه های دستی:

  • [ 9.1 /H-0-1] باید به برنامه های شخص ثالث اجازه دهد تا از طریق مجوز android.permission.PACKAGE_USAGE_STATS به آمار استفاده دسترسی داشته باشند و مکانیزمی در دسترس کاربر برای اعطا یا لغو دسترسی به چنین برنامه هایی در پاسخ به android.settings.ACTION_USAGE_ACCESS_SETTINGS فراهم کند. هدف android.settings.ACTION_USAGE_ACCESS_SETTINGS .

هنگامی که پیاده سازی های دستگاه دستی از صفحه قفل ایمن پشتیبانی می کنند، آنها:

  • [ 9.11 /H-1-1] باید به کاربر اجازه دهد که کوتاه ترین زمان خواب را انتخاب کند، یعنی زمان انتقال از حالت قفل به حالت قفل، 15 ثانیه یا کمتر.
  • [ 9.11 /H-1-2] باید توانایی کاربر را برای پنهان کردن اعلان ها و غیرفعال کردن همه اشکال احراز هویت به جز احراز هویت اولیه توضیح داده شده در صفحه قفل ایمن 9.11.1 فراهم کند. AOSP نیاز به عنوان حالت قفل را برآورده می کند.

2.3. الزامات تلویزیون

دستگاه Android Television به یک پیاده‌سازی دستگاه Android اشاره دارد که یک رابط سرگرمی برای مصرف رسانه‌های دیجیتال، فیلم‌ها، بازی‌ها، برنامه‌ها و/یا تلویزیون زنده برای کاربرانی است که حدود ده فوت دورتر می‌نشینند (یک کاربر «کم پشت» یا «کاربر 10 فوتی» رابط").

پیاده‌سازی‌های دستگاه اندروید در صورتی به عنوان تلویزیون طبقه‌بندی می‌شوند که تمام معیارهای زیر را داشته باشند:

  • مکانیزمی برای کنترل از راه دور رابط کاربری رندر شده بر روی صفحه نمایشی که ممکن است ده فوت دورتر از کاربر قرار گیرد، ارائه کرده اند.
  • یک صفحه نمایش تعبیه شده با طول مورب بزرگتر از 24 اینچ داشته باشید یا دارای یک پورت خروجی ویدئو مانند VGA، HDMI، DisplayPort یا یک پورت بی سیم برای نمایش باشد.

الزامات اضافی در بقیه این بخش مربوط به پیاده سازی دستگاه تلویزیون Android است.

2.3.1. سخت افزار

پیاده سازی دستگاه های تلویزیونی:

  • [ 7.2.2 /T-0-1] باید از D-pad پشتیبانی کند.
  • [ 7.2.3 /T-0-1] باید عملکردهای Home و Back را ارائه دهد.
  • [ 7.2 .3/T-0-2] باید هر دو رویداد فشار عادی و طولانی عملکرد Back ( KEYCODE_BACK ) را به برنامه پیش زمینه ارسال کند.
  • [ 7.2 .6.1/T-0-1] باید شامل پشتیبانی از کنترلرهای بازی باشد و پرچم ویژگی android.hardware.gamepad را اعلام کند.
  • [ 7.2 .7/T] باید یک کنترل از راه دور فراهم کند که از طریق آن کاربران بتوانند به ورودی های ناوبری غیر لمسی و کلیدهای ناوبری اصلی دسترسی داشته باشند.

اگر پیاده سازی های دستگاه تلویزیون شامل ژیروسکوپ باشد، آنها:

  • [ 7.3.4 /T-1-1] باید بتواند رویدادها را تا فرکانس حداقل 100 هرتز گزارش کند.

پیاده سازی دستگاه های تلویزیونی:

  • [ 7.4 .3/T-0-1] باید از بلوتوث و بلوتوث LE پشتیبانی کند.
  • [ 7.6 .1/T-0-1] باید حداقل 4 گیگابایت فضای ذخیره سازی غیر فرار برای داده های خصوصی برنامه (معروف به پارتیشن "/data") در دسترس باشد.

اگر پیاده سازی های دستگاه تلویزیون شامل یک پورت USB باشد که از حالت میزبان پشتیبانی می کند، آنها:

  • [ 7.5 .3/T-1-1] باید شامل پشتیبانی از یک دوربین خارجی باشد که از طریق این درگاه USB متصل می شود اما لزوما همیشه متصل نیست.

اگر اجراهای دستگاه تلویزیون 32 بیتی هستند:

  • [ 7.6 .1/T-1-1] در صورت استفاده از هر یک از تراکم های زیر، حافظه موجود برای هسته و فضای کاربر باید حداقل 896 مگابایت باشد:

    • 400dpi یا بالاتر در صفحه نمایش های کوچک/عادی
    • xhdpi یا بالاتر در صفحه نمایش های بزرگ
    • tvdpi یا بالاتر در صفحه نمایش های بسیار بزرگ

اگر پیاده سازی دستگاه تلویزیون 64 بیتی باشد:

  • [ 7.6 .1/T-2-1] در صورت استفاده از هر یک از تراکم های زیر، حافظه موجود برای هسته و فضای کاربر باید حداقل 1280 مگابایت باشد:

    • 400dpi یا بالاتر در صفحه نمایش های کوچک/عادی
    • xhdpi یا بالاتر در صفحه نمایش های بزرگ
    • tvdpi یا بالاتر در صفحه نمایش های بسیار بزرگ

توجه داشته باشید که "حافظه در دسترس برای هسته و فضای کاربر" در بالا به فضای حافظه ارائه شده به اضافه هر حافظه ای که قبلاً به اجزای سخت افزاری مانند رادیو، ویدئو و غیره اختصاص داده شده است که در پیاده سازی های دستگاه تحت کنترل هسته نیستند، اشاره دارد.

پیاده سازی دستگاه های تلویزیونی:

  • [ 7.8 .1/T] باید دارای یک میکروفون باشد.
  • [ 7.8 .2/T-0-1] باید یک خروجی صدا داشته باشد و android.hardware.audio.output اعلام کند.

2.3.2. چند رسانه ای

پیاده سازی دستگاه های تلویزیونی باید از فرمت های رمزگذاری صوتی زیر پشتیبانی کند:

  • [ 5.1 /T-0-1] نمایه AAC MPEG-4 (AAC LC)
  • [ 5.1 /T-0-2] MPEG-4 HE AAC Profile (AAC+)
  • [ 5.1 /T-0-3] AAC ELD (AAC تاخیر کم تقویت شده)

پیاده سازی دستگاه های تلویزیونی باید از فرمت های رمزگذاری ویدیوی زیر پشتیبانی کند:

  • [ 5.2 /T-0-1] H.264
  • [ 5.2 /T-0-2] VP8

پیاده سازی دستگاه های تلویزیونی:

  • [ 5.2 .2/T-SR] برای پشتیبانی از کدگذاری H.264 از ویدیوهای با وضوح 720p و 1080p با سرعت 30 فریم در ثانیه اکیداً توصیه می شود.

پیاده سازی دستگاه های تلویزیونی باید از فرمت های رمزگشایی ویدیویی زیر پشتیبانی کند:

اجرای دستگاه های تلویزیونی برای پشتیبانی از فرمت های رمزگشایی ویدیوی زیر به شدت توصیه می شود:

پیاده‌سازی دستگاه‌های تلویزیونی باید از رمزگشایی H.264، همانطور که در بخش 5.3.4 شرح داده شده است، با نرخ فریم استاندارد و وضوح تصویر تا و شامل موارد زیر پشتیبانی کند:

  • [ 5.3.4 .4/T-1-1] HD 1080p با سرعت 60 فریم در ثانیه با نمایه Basline
  • [ 5.3.4 .4/T-1-2] HD 1080p با سرعت 60 فریم در ثانیه با نمایه اصلی
  • [ 5.3.4 .4/T-1-3] HD 1080p با سرعت 60 فریم در ثانیه با سطح نمایه بالا 4.2

پیاده‌سازی دستگاه‌های تلویزیونی با رمزگشاهای سخت‌افزاری H.265 باید از رمزگشایی H.265، همانطور که در بخش 5.3.5 توضیح داده شده است، با نرخ فریم استاندارد و وضوح تصویر تا و شامل موارد زیر پشتیبانی کنند:

  • [ 5.3.5 .4/T-1-1] HD 1080p با سرعت 60 فریم در ثانیه با نمایه اصلی سطح 4.1

اگر پیاده‌سازی‌های دستگاه تلویزیون با رمزگشاهای سخت‌افزاری H.265 از رمزگشایی H.265 و نمایه رمزگشایی UHD پشتیبانی می‌کنند، آنها:

  • [ 5.3.5 .5/T-2-1] باید از نمایه رمزگشایی UHD با سرعت 60 فریم در ثانیه با نمایه Main10 Level 5 Main Tier پشتیبانی کند.

پیاده سازی دستگاه های تلویزیونی باید از رمزگشایی VP8، همانطور که در بخش 5.3.6 توضیح داده شده است، با نرخ فریم استاندارد و وضوح تصویر تا و شامل موارد زیر پشتیبانی کند:

  • [ 5.3.6 .4/T-1-1] نمایه رمزگشایی HD 1080p با سرعت 60 فریم در ثانیه

پیاده‌سازی دستگاه‌های تلویزیونی با رمزگشاهای سخت‌افزاری VP9 باید از رمزگشایی VP9، همانطور که در بخش 5.3.7 توضیح داده شده است، با نرخ‌های فریم استاندارد و وضوح تصویر تا و شامل:

  • [ 5.3.7 .4/T-1-1] HD 1080p با سرعت 60 فریم در ثانیه با نمایه 0 (عمق رنگ 8 بیت)

اگر پیاده‌سازی‌های دستگاه تلویزیون با رمزگشاهای سخت‌افزار VP9 از رمزگشایی VP9 و نمایه رمزگشایی UHD پشتیبانی می‌کنند، آنها:

  • [ 5.3.7.5/T-2-1 ] باید از نمایه رمزگشایی UHD با سرعت 60 فریم در ثانیه با نمایه 0 (عمق رنگ 8 بیت) پشتیبانی کند.
  • [ 5.3.7 .5/T-2-1] برای پشتیبانی از نمایه رمزگشایی UHD با سرعت 60 فریم در ثانیه با نمایه 2 (عمق رنگ 10 بیت) اکیداً توصیه می شود.

پیاده سازی دستگاه های تلویزیونی:

  • [ 5.5 .3/T-0-1] باید شامل پشتیبانی از ولوم اصلی سیستم و کاهش صدای خروجی دیجیتال در خروجی های پشتیبانی شده باشد، به جز خروجی های عبوری صوتی فشرده (که در آن هیچ رمزگشایی صدا در دستگاه انجام نمی شود).
  • [ 5.8 /T-0-1] باید حالت خروجی HDMI را برای انتخاب حداکثر وضوحی که می تواند با نرخ تازه سازی 50 هرتز یا 60 هرتز برای همه نمایشگرهای سیمی پشتیبانی کند، تنظیم کنید.
  • [ 5.8 /T-SR] برای ارائه یک انتخابگر نرخ تازه سازی HDMI قابل تنظیم توسط کاربر برای همه نمایشگرهای سیمی به شدت توصیه می شود.
  • [ 5.8 /T-SR] برای پشتیبانی از رمزگشایی همزمان جریان های امن به شدت توصیه می شود. حداقل، رمزگشایی همزمان دو بخار به شدت توصیه می شود.
  • [ 5.8 ] باید نرخ نوسازی حالت خروجی HDMI را روی 50 هرتز یا 60 هرتز تنظیم کنید، بسته به نرخ تازه سازی ویدیو برای منطقه ای که دستگاه برای همه نمایشگرهای سیمی در آن فروخته می شود.

اگر پیاده‌سازی‌های دستگاه تلویزیون از رمزگشایی UHD پشتیبانی می‌کنند و از نمایشگرهای خارجی پشتیبانی می‌کنند، آنها:

  • [ 5.8 /T-1-1] باید از HDCP 2.2 پشتیبانی کند.

اگر پیاده‌سازی‌های دستگاه تلویزیون از رمزگشایی UHD پشتیبانی نمی‌کنند اما از نمایشگرهای خارجی پشتیبانی می‌کنند، آنها:

  • [ 5.8 /T-2-1] باید از HDCP 1.4 پشتیبانی کند

2.3.3. نرم افزار

پیاده سازی دستگاه های تلویزیونی:

  • [ 3 /T-0-1] باید ویژگی های android.software.leanback و android.hardware.type.television را اعلام کند.
  • [ 3.4 .1/T-0-1] باید یک پیاده سازی کامل از android.webkit.Webview API ارائه دهد.

اگر پیاده سازی های دستگاه Android TV از صفحه قفل پشتیبانی می کنند، آنها:

  • [ 3.8 .10/T-1-1] باید اعلان‌های صفحه قفل از جمله الگوی اعلان رسانه را نمایش دهد.

پیاده سازی دستگاه های تلویزیونی:

  • [ 3.8 .14/T-SR] برای پشتیبانی از حالت چند پنجره ای حالت تصویر در تصویر (PIP) اکیداً توصیه می شود.
  • [ 3.10 /T-0-1] باید از خدمات دسترسی شخص ثالث پشتیبانی کند.
  • [ 3.10 /T-SR] اکیداً توصیه می‌شود که سرویس‌های دسترس‌پذیری را در دستگاه از قبل بارگیری کنند که با عملکردهای دسترسی سوئیچ و TalkBack (برای زبان‌هایی که توسط موتور از پیش نصب‌شده تبدیل متن به گفتار پشتیبانی می‌شوند) قابل مقایسه یا فراتر از آن است که در گفتگوی باز ارائه شده است. پروژه منبع .

اگر پیاده‌سازی‌های دستگاه تلویزیونی ویژگی android.hardware.audio.output را گزارش کنند، آنها:

  • [ 3.11 /T-SR] اکیداً توصیه می‌شود که موتور TTS را شامل شود که از زبان‌های موجود در دستگاه پشتیبانی می‌کند.
  • [ 3.11 /T-1-1] باید از نصب موتورهای TTS شخص ثالث پشتیبانی کند.

پیاده سازی دستگاه های تلویزیونی:

  • [ 3.12 /T-0-1] باید از چارچوب ورودی تلویزیون پشتیبانی کند.

2.3.4. عملکرد و قدرت

  • [ 8.1 /T-0-1] تأخیر فریم ثابت . تأخیر ناسازگار فریم یا تأخیر در ارائه فریم‌ها نباید بیشتر از 5 فریم در ثانیه اتفاق بیفتد و باید کمتر از 1 فریم در ثانیه باشد.
  • [ 8.2 /T-0-1] باید عملکرد نوشتن متوالی حداقل 5 مگابایت بر ثانیه را تضمین کند.
  • [ 8.2 /T-0-2] باید از عملکرد نوشتن تصادفی حداقل 0.5 مگابایت بر ثانیه اطمینان حاصل کند.
  • [ 8.2 /T-0-3] باید عملکرد خواندن متوالی حداقل 15 مگابایت بر ثانیه را تضمین کند.
  • [ 8.2 /T-0-4] باید عملکرد خواندن تصادفی حداقل 3.5 مگابایت بر ثانیه را تضمین کند.

اگر پیاده‌سازی‌های دستگاه تلویزیونی شامل ویژگی‌هایی برای بهبود مدیریت انرژی دستگاه باشد که در AOSP گنجانده شده است یا ویژگی‌های موجود در AOSP را گسترش دهد، آنها:

  • [ 8.3 /T-1-1] برای فعال و غیرفعال کردن ویژگی صرفه جویی در باتری، باید توانایی کاربر را فراهم کند.
  • [ 8.3 /T-1-2] باید برای نمایش همه برنامه‌هایی که از حالت‌های ذخیره انرژی برنامه و Doze معاف هستند، امکانات لازم را برای کاربر فراهم کند.

پیاده سازی دستگاه های تلویزیونی:

  • [ 8.4 /T-0-1] باید یک نمایه قدرت برای هر جزء ارائه کند که مقدار مصرف فعلی را برای هر جزء سخت افزاری و تخلیه تقریبی باتری ناشی از قطعات در طول زمان را همانطور که در سایت پروژه منبع باز Android مستند شده است، تعریف کند.
  • [ 8.4 /T-0-2] باید تمام مقادیر مصرف برق را بر حسب میلی آمپر ساعت (mAh) گزارش کند.
  • [ 8.4 /T-0-3] باید مصرف انرژی CPU را به ازای UID هر فرآیند گزارش کند. پروژه منبع باز Android از طریق اجرای ماژول هسته uid_cputime این نیاز را برآورده می کند.
  • [ 8.4 /T] باید به خود مؤلفه سخت افزار نسبت داده شود اگر قادر به نسبت دادن مصرف برق جزء سخت افزاری به برنامه نیست.
  • [ 8.4 /T-0-4] باید این مصرف انرژی را از طریق دستور adb shell dumpsys batterystats shell در اختیار توسعه‌دهنده برنامه قرار دهد.

2.4. الزامات ساعت

دستگاه Android Watch به یک دستگاه اندرویدی اشاره دارد که برای پوشیدن روی بدن، شاید روی مچ قرار دارد.

پیاده‌سازی‌های دستگاه اندروید در صورتی به عنوان Watch طبقه‌بندی می‌شوند که تمام معیارهای زیر را داشته باشند:

  • صفحه نمایشی با طول مورب فیزیکی در محدوده 1.1 تا 2.5 اینچ داشته باشید.
  • مکانیزمی برای پوشیدن روی بدن ارائه دهید.

الزامات اضافی در بقیه این بخش مربوط به پیاده سازی دستگاه Android Watch است.

2.4.1. سخت افزار

اجراهای دستگاه را تماشا کنید:

  • [ 7.1 .1.1/W-0-1] باید صفحه نمایشی با اندازه مورب فیزیکی در محدوده 1.1 تا 2.5 اینچ داشته باشد.

  • [ 7.2 .3/W-0-1] باید تابع Home و عملکرد Back را در دسترس کاربر داشته باشد، مگر در مواردی که در UI_MODE_TYPE_WATCH است.

  • [ 7.2.4 /W-0-1] باید از ورودی صفحه لمسی پشتیبانی کند.

  • [ 7.3 .1/W-SR] به شدت توصیه می شود که شتاب سنج 3 محوره را در خود جای دهد.

  • [ 7.4 .3/W-0-1] باید از بلوتوث پشتیبانی کند.

  • [ 7.6 .1/W-0-1] باید حداقل 1 گیگابایت فضای ذخیره سازی غیر فرار برای داده های خصوصی برنامه (معروف به پارتیشن "/data") در دسترس باشد.

  • [ 7.6 .1/W-0-2] باید حداقل 416 مگابایت حافظه در دسترس هسته و فضای کاربر داشته باشد.

  • [ 7.8 .1/W-0-1] باید دارای میکروفون باشد.

  • [ 7.8 .2/W] ممکن است اما نباید خروجی صدا داشته باشد.

2.4.2. چند رسانه ای

بدون نیاز اضافی

2.4.3. نرم افزار

اجراهای دستگاه را تماشا کنید:

  • [ 3 /W-0-1] باید ویژگی android.hardware.type.watch را اعلام کند.
  • [ 3 /W-0-2] باید uiMode = UI_MODE_TYPE_WATCH را پشتیبانی کند.

اجراهای دستگاه را تماشا کنید:

  • [ 3.8 .4/W-SR] اکیداً توصیه می‌شود که یک دستیار را روی دستگاه اجرا کنید تا عملکرد Assist را مدیریت کند.

اجراهای دستگاهی را که پرچم ویژگی android.hardware.audio.output را اعلام می کنند تماشا کنید:

  • [ 3.10 /W-1-1] باید از خدمات دسترسی شخص ثالث پشتیبانی کند.
  • [ 3.10 /W-SR] اکیداً توصیه می‌شود سرویس‌های دسترس‌پذیری را در دستگاه از قبل بارگیری کنید که با عملکردهای دسترسی سوئیچ و TalkBack (برای زبان‌هایی که توسط موتور از پیش نصب شده تبدیل متن به گفتار پشتیبانی می‌شوند) قابل مقایسه یا فراتر از آن، همانطور که در گفتگوی باز ارائه شده است. پروژه منبع .

اگر پیاده‌سازی‌های دستگاه Watch ویژگی android.hardware.audio.output را گزارش کنند، آنها:

  • [ 3.11 /W-SR] اکیداً توصیه می‌شود یک موتور TTS را که از زبان‌های موجود در دستگاه پشتیبانی می‌کند، اضافه کنند.

  • [ 3.11 /W-0-1] باید از نصب موتورهای TTS شخص ثالث پشتیبانی کند.

2.4.4. عملکرد و قدرت

اگر پیاده‌سازی‌های دستگاه Watch شامل ویژگی‌هایی برای بهبود مدیریت انرژی دستگاه باشد که در AOSP گنجانده شده است یا ویژگی‌هایی را که در AOSP گنجانده شده است گسترش دهد، آنها:

  • [ 8.3 /W-SR] به شدت توصیه می‌شود تا امکان نمایش همه برنامه‌هایی را که از حالت‌های ذخیره انرژی برنامه و Doze معاف هستند، به کاربر ارائه دهند.
  • [ 8.3 /W-SR] به شدت توصیه می‌شود تا توانایی کاربر را برای فعال و غیرفعال کردن ویژگی صرفه‌جویی باتری فراهم کند.

اجراهای دستگاه را تماشا کنید:

  • [ 8.4 /W-0-1] باید یک نمایه برق برای هر جزء ارائه کند که مقدار مصرف فعلی را برای هر جزء سخت افزاری و تخلیه تقریبی باتری ناشی از قطعات در طول زمان، همانطور که در سایت پروژه منبع باز Android مستند شده است، تعریف کند.
  • [ 8.4 /W-0-2] باید تمام مقادیر مصرف برق را بر حسب میلی آمپر ساعت (mAh) گزارش کند.
  • [ 8.4 /W-0-3] باید مصرف انرژی CPU را به ازای هر UID فرآیند گزارش کند. پروژه منبع باز Android از طریق اجرای ماژول هسته uid_cputime این نیاز را برآورده می کند.
  • [ 8.4 /W-0-4] باید این مصرف انرژی را از طریق دستور adb shell dumpsys batterystats shell در اختیار توسعه‌دهنده برنامه قرار دهد.
  • [ 8.4 /W] باید به خود مؤلفه سخت‌افزار نسبت داده شود، اگر نمی‌توان مصرف برق جزء سخت‌افزار را به یک برنامه نسبت داد.

2.5. الزامات خودرو

پیاده‌سازی Android Automotive به یک واحد اصلی خودرو اشاره دارد که Android را به عنوان یک سیستم عامل برای بخشی یا تمام سیستم و/یا عملکرد اطلاعات سرگرمی اجرا می‌کند.

پیاده‌سازی‌های دستگاه Android در صورتی به عنوان Automotive طبقه‌بندی می‌شوند که ویژگی android.hardware.type.automotive را داشته باشند یا تمام معیارهای زیر را داشته باشند.

  • به عنوان بخشی از یک وسیله نقلیه خودرویی یا قابل اتصال به آن تعبیه شده است.
  • از صفحه نمایش در ردیف صندلی راننده به عنوان نمایشگر اصلی استفاده می کنید.

الزامات اضافی در بقیه این بخش مخصوص پیاده سازی دستگاه های Android Automobile است.

2.5.1. سخت افزار

پیاده سازی دستگاه های خودرو:

  • [ 7.1 .1.1/A-0-1] باید حداقل 6 اینچ در اندازه مورب فیزیکی داشته باشد.
  • [ 7.1 .1.1/A-0-2] باید یک طرح اندازه صفحه حداقل 750 dp x 480 dp داشته باشد.

  • [ 7.2 .3/A-0-1] باید عملکرد خانه را ارائه دهد و ممکن است عملکردهای عقب و اخیر را ارائه دهد.

  • [ 7.2 .3/A-0-2] باید هر دو رویداد فشار عادی و طولانی از عملکرد عقب ( KEYCODE_BACK ) را به برنامه پیش زمینه ارسال کنید.

  • [ 7.3 .1/A-Sr] به شدت توصیه می شود که یک شتاب سنج 3 محور را شامل شود.

اگر اجرای دستگاه خودرو شامل شتاب سنج 3 محور باشد ، آنها:

اگر پیاده سازی دستگاه های خودرو شامل ژیروسکوپ است ، آنها:

  • [ 7.3 .4/A-1-1] باید بتواند رویدادها را تا فرکانس حداقل 100 هرتز گزارش دهد.

پیاده سازی دستگاه های خودرو:

  • [ 7.3 .11/A-0-1] باید دنده فعلی را به عنوان SENSOR_TYPE_GEAR فراهم کند.

پیاده سازی دستگاه های خودرو:

  • [ 7.3 .11.2/A-0-1] باید از حالت روز/شب تعریف شده به عنوان SENSOR_TYPE_NIGHT پشتیبانی کند.
  • [ 7.3 .11.2/A-0-2] مقدار پرچم SENSOR_TYPE_NIGHT باید با حالت روز/شب داشبورد سازگار باشد و باید بر اساس ورودی سنسور نور محیط باشد.
  • سنسور نور محیط زیرین ممکن است همان فوتومتر باشد.

  • [ 7.3 .11.4/A-0-1] باید سرعت وسیله نقلیه را مطابق با SENSOR_TYPE_CAR_SPEED تعریف کند.

  • [ 7.3 .11.5/A-0-1] باید وضعیت ترمز پارکینگ را مطابق با SENSOR_TYPE_PARKING_BRAKE تعریف کند.

  • [ 7.4 .3/A-0-1] باید از بلوتوث پشتیبانی کند و باید از بلوتوث LE پشتیبانی کند.

  • [ 7.4 .3/A-0-2] پیاده سازی های خودروسازی Android باید از پروفایل های بلوتوث زیر پشتیبانی کند:
    • تماس تلفنی با مشخصات هندزفری (HFP).
    • پخش رسانه از مشخصات توزیع صوتی (A2DP).
    • کنترل پخش رسانه بر روی مشخصات کنترل از راه دور (AVRCP).
    • به اشتراک گذاری با استفاده از نمایه دسترسی به کتاب تلفن (PBAP) تماس بگیرید.
  • [ 7.4 .3/A-Sr] برای پشتیبانی از مشخصات دسترسی به پیام (MAP) به شدت توصیه می شود.

  • [ 7.4 .5/a] باید شامل پشتیبانی از اتصال داده های مبتنی بر شبکه سلولی باشد.

  • [ 7.4 .5/A] ممکن است از NetworkCapabilities#NET_CAPABILITY_OEM_PAID برای شبکه هایی که باید در دسترس برنامه های سیستم باشند استفاده کنید.

  • [ 7.6 .1/A-0-1] باید حداقل 4 گیگابایت ذخیره غیر فرار برای برنامه های خصوصی برنامه (با نام "/داده" پارتیشن) داشته باشد.

پیاده سازی دستگاه های خودرو:

  • [ 7.6 .1/a] باید پارتیشن داده را قالب بندی کند تا عملکرد و طول عمر بهبود یافته در ذخیره سازی فلش ، به عنوان مثال با استفاده از سیستم فایل f2fs ارائه شود.

اگر پیاده سازی دستگاه های خودروسازی از طریق بخشی از ذخیره داخلی غیر قابل جابجایی ، ذخیره خارجی مشترک را فراهم می کند ، آنها:

  • [ 7.6 .1/A-SR] به شدت توصیه می شود که I/O را در عملیات انجام شده در ذخیره سازی خارجی ، به عنوان مثال با استفاده از SDCardFS کاهش دهید.

اگر پیاده سازی دستگاه های خودرو 32 بیتی باشد:

  • [ 7.6 .1/A-1-1] حافظه موجود در هسته و فضای کاربری باید حداقل 512MB در صورت استفاده از چگالی های زیر باشد:

    • 280dpi یا پایین تر در صفحه های کوچک/عادی
    • LDPI یا پایین تر روی صفحه های فوق العاده بزرگ
    • MDPI یا پایین روی صفحه های بزرگ
  • [ 7.6 .1/A-1-2] حافظه موجود در هسته و فضای کاربری باید حداقل 608 مگابایت در صورت استفاده از چگالی های زیر باشد:

    • XHDPI یا بالاتر در صفحه های کوچک/عادی
    • HDPI یا بالاتر در صفحه های بزرگ
    • MDPI یا بالاتر در صفحه های فوق العاده بزرگ
  • [ 7.6 .1/A-1-3] در صورت استفاده از چگالی های زیر باید حداقل 896 مگابایت حداقل 896 مگابایت باشد:

    • 400DPI یا بالاتر در صفحه های کوچک/عادی
    • XHDPI یا بالاتر در صفحه های بزرگ
    • TVDPI یا بالاتر در صفحه های فوق العاده بزرگ
  • [ 7.6 .1/A-1-4] حافظه موجود در هسته و فضای کاربری باید حداقل در صورت استفاده از چگالی های زیر حداقل 1344MB باشد:

    • 560DPI یا بالاتر در صفحه های کوچک/عادی
    • 400dpi یا بالاتر در صفحه های بزرگ
    • XHDPI یا بالاتر در صفحه های بزرگ فوق العاده

اگر اجرای دستگاه خودرو 64 بیتی باشد:

  • [ 7.6 .1/A-2-1] حافظه موجود در هسته و فضای کاربری باید حداقل 816 مگابایت باشد در صورت استفاده از تراکم های زیر:

    • 280dpi یا پایین تر در صفحه های کوچک/عادی
    • LDPI یا پایین تر روی صفحه های فوق العاده بزرگ
    • MDPI یا پایین روی صفحه های بزرگ
  • [ 7.6 .1/A-2-2] حافظه موجود در هسته و فضای کاربری باید حداقل در صورت استفاده از چگالی زیر 944MB باشد:

    • XHDPI یا بالاتر در صفحه های کوچک/عادی
    • HDPI یا بالاتر در صفحه های بزرگ
    • MDPI یا بالاتر در صفحه های فوق العاده بزرگ
  • [ 7.6 .1/A-2-3] در صورت استفاده از چگالی زیر باید حداقل 1280 مگابایت حداقل 1280 مگابایت باشد:

    • 400DPI یا بالاتر در صفحه های کوچک/عادی
    • XHDPI یا بالاتر در صفحه های بزرگ
    • TVDPI یا بالاتر در صفحه های فوق العاده بزرگ
  • [ 7.6 .1/A-2-4] حافظه موجود در هسته و فضای کاربری باید حداقل 1824MB در صورت استفاده از چگالی های زیر باشد:

    • 560DPI یا بالاتر در صفحه های کوچک/عادی
    • 400dpi یا بالاتر در صفحه های بزرگ
    • XHDPI یا بالاتر در صفحه های بزرگ فوق العاده

توجه داشته باشید که "حافظه در دسترس برای هسته و فضای کاربری" در بالا به فضای حافظه ارائه شده علاوه بر هر حافظه ای که قبلاً به اجزای سخت افزاری مانند رادیو ، فیلم و موارد دیگر اختصاص داده شده است ، اشاره دارد.

پیاده سازی دستگاه های خودرو:

  • [ 7.7 .1/a] باید یک درگاه USB را که از حالت محیطی پشتیبانی می کند ، شامل شود.

پیاده سازی دستگاه های خودرو:

  • [ 7.8 .1/A-0-1] باید یک میکروفون را شامل شود.

پیاده سازی دستگاه های خودرو:

  • [ 7.8 .2/A-0-1] باید یک خروجی صوتی داشته باشد و android.hardware.audio.output اعلام کند.

2.5.2. چند رسانه ای

پیاده سازی دستگاه های خودرو باید از رمزگذاری صوتی زیر پشتیبانی کند:

  • [ 5.1 /A-0-1] پروفایل MPEG-4 AAC (AAC LC)
  • [ 5.1 /A-0-2] مشخصات MPEG-4 HE AAC (AAC+)
  • [ 5.1 /A-0-3] AAC ELD (افزایش تأخیر کم AAC)

پیاده سازی دستگاه های خودرو باید از رمزگذاری ویدیویی زیر پشتیبانی کند:

  • [ 5.2 /A-0-1] H.264 AVC
  • [ 5.2 /A-0-2] VP8

پیاده سازی دستگاه های خودرو باید از رمزگشایی ویدیویی زیر پشتیبانی کند:

  • [ 5.3 /A-0-1] H.264 AVC
  • [ 5.3 /A-0-2] MPEG-4 SP
  • [ 5.3 /A-0-3] VP8
  • [ 5.3 /A-0-4] VP9

پیاده سازی دستگاه های خودرو به شدت برای پشتیبانی از رمزگشایی ویدیویی زیر توصیه می شود:

  • [ 5.3 /a-sr] H.265 HEVC

2.5.3. نرم افزار

پیاده سازی دستگاه های خودرو:

  • [ 3 /A-0-1] باید ویژگی android.hardware.type.automotive را اعلام کند.

  • [ 3 /A-0-2] باید از uimode = UI_MODE_TYPE_CAR پشتیبانی کند.

  • [ 3 /A-0-3] باید از همه API های عمومی در android.car.* namespace پشتیبانی کند.

  • [ 3.4 .1/A-0-1] باید یک اجرای کامل android.webkit.Webview API را ارائه دهد.

  • [ 3.8 .3/A-0-1] باید اعلان هایی را که Notification.CarExtender استفاده می کنند ، نشان دهند

  • [ 3.8 .4/A-SR] به شدت توصیه می شود که یک دستیار را در دستگاه برای انجام اقدامات کمک کند.

  • [ 3.13 /A-SR] به شدت توصیه می شود که یک مؤلفه UI تنظیمات سریع را درج کنید.

اگر پیاده سازی دستگاه های خودرو شامل یک دکمه فشار به گفتگوی باشد ، آنها:

  • [ 3.8 .4/A-1-1] باید از فشار کوتاه دکمه فشار به گفتار به عنوان تعامل تعیین شده برای راه اندازی برنامه کمک به کاربر استفاده کند ، به عبارت دیگر برنامه ای که VoiceInteractionService اجرا می کند.

پیاده سازی دستگاه های خودرو:

  • [ 3.14 /A-0-1] برای پشتیبانی از برنامه های شخص ثالث با استفاده از API های رسانه ای ، همانطور که در بخش 3.14 توضیح داده شده است ، باید یک چارچوب UI را شامل شود.

2.5.4. عملکرد و قدرت

اگر پیاده سازی دستگاه های خودرو شامل ویژگی هایی برای بهبود مدیریت انرژی دستگاه است که در AOSP گنجانده شده یا ویژگی هایی را که در AOSP گنجانده شده است ، گسترش می دهند ، آنها:

  • [ 8.3 /A-1-1] برای فعال کردن و غیرفعال کردن ویژگی محافظ باتری باید هزینه کاربر را فراهم کند.
  • [ 8.3 /A-1-2] باید هزینه کاربر را برای نمایش کلیه برنامه هایی که از حالت آماده به کار برنامه معاف هستند و حالت های صرفه جویی در مصرف برق را ارائه می دهند ، فراهم کند.

پیاده سازی دستگاه های خودرو:

  • [ 8.2 /A-0-1] باید تعداد بایت های خوانده شده و نوشته شده برای ذخیره سازی غیر فرار در هر فرآیند را گزارش کند ، بنابراین آمار از طریق سیستم API android.car.storagemonitoring.CarStorageMonitoringManager در دسترس توسعه دهندگان است. پروژه منبع باز اندروید از طریق ماژول هسته uid_sys_stats با نیاز ، نیاز را برآورده می کند.
  • [ 8.4 /A-0-1] باید یک پروفایل قدرت در هر جزء را ارائه دهد که مقدار مصرف فعلی را برای هر مؤلفه سخت افزاری و تخلیه تقریبی باتری ناشی از قطعات در طول زمان تعریف می کند ، همانطور که در سایت پروژه منبع باز اندروید ثبت شده است.
  • [ 8.4 /A-0-2] باید تمام مقادیر مصرف برق را در ساعات میلی لیتر (MAH) گزارش دهد.
  • [ 8.4 /A-0-3] باید مصرف انرژی CPU را در مورد UID هر فرآیند گزارش دهد. پروژه منبع باز اندروید از طریق اجرای ماژول هسته uid_cputime با این نیاز برآورده می شود.
  • [ 8.4 /a] در صورت عدم امکان استفاده از انرژی مؤلفه سخت افزار به یک برنامه ، باید به خود مؤلفه سخت افزار نسبت داده شود.
  • [ 8.4 /A-0-4] باید این استفاده از برق را از طریق دستور Shell adb shell dumpsys batterystats به توسعه دهنده برنامه در دسترس قرار دهد.

2.5.5. مدل امنیتی

اگر پیاده سازی دستگاه های خودرو از چندین کاربر پشتیبانی می کند ، آنها:

  • [ 9.5 /A-1-1] باید یک حساب کاربری مهمان را شامل شود که تمام کارکردهای ارائه شده توسط سیستم وسیله نقلیه را بدون نیاز به کاربر برای ورود به سیستم امکان پذیر می کند.

اگر پیاده سازی دستگاه های خودرو از صفحه قفل ایمن پشتیبانی می کند ، آنها:

پیاده سازی دستگاه های خودرو:

  • [ 9.14 /A-0-1] باید پیام های دروازه بان از زیر سیستم های وسیله نقلیه Android Framework ، به عنوان مثال ، لیست های مجاز و منابع پیام مجاز را داشته باشد.
  • [ 9.14 /A-0-2] باید در برابر انکار حملات خدماتی از چارچوب Android یا برنامه های شخص ثالث نظارت کند. این نگهبان در برابر نرم افزار مخرب که شبکه وسیله نقلیه را با ترافیک سیل می کند ، که ممکن است منجر به سوء عملکرد زیر سیستم های خودرو شود.

2.6. قرص مورد نیاز

یک دستگاه تبلت Android به اجرای دستگاه Android اشاره دارد که تمام معیارهای زیر را برآورده می کند:

  • به طور معمول با نگه داشتن در هر دو دست استفاده می شود.
  • پیکربندی Clamshell یا Convertible ندارد.
  • هرگونه اجرای صفحه کلید فیزیکی که با دستگاه استفاده می شود باید با استفاده از یک اتصال استاندارد متصل شود.
  • منبع تغذیه ای دارد که تحرک مانند باتری را فراهم می کند.
  • در محدوده 7 تا 18 اینچ اندازه صفحه نمایش مورب فیزیکی دارد.

پیاده سازی دستگاه های تبلت نیازهای مشابهی برای پیاده سازی دستگاه های دستی دارد. استثنائات توسط و * در آن بخش نشان داده شده و برای مرجع در این بخش ذکر شده است.

2.4.1. سخت افزار

اندازه صفحه نمایش

  • [ 7.1 .1.1/TAB-0-1] باید یک صفحه نمایش در محدوده 7 تا 18 اینچ داشته باشد.

حداقل حافظه و ذخیره سازی (بخش 7.6.1)

تراکم صفحه ذکر شده برای صفحه های کوچک/عادی در الزامات دستی در مورد قرص ها کاربرد ندارد.

حالت محیطی USB (بخش 7.7.1)

اگر پیاده سازی دستگاه تبلت شامل یک درگاه USB است که از حالت محیطی پشتیبانی می کند ، آنها:

  • [ 7.7.1 /TAB] ممکن است API لوازم جانبی Android Open (AOA) را پیاده سازی کند.

حالت واقعیت مجازی (بخش 7.9.1)

واقعیت مجازی عملکرد بالا (بخش 7.9.2)

الزامات واقعیت مجازی برای تبلت ها کاربرد ندارد.

3. نرم افزار

3.1. سازگاری API مدیریت شده

محیط اجرای بایت کد Dalvik مدیریت شده وسیله اولیه برای برنامه های اندروید است. رابط برنامه نویسی برنامه اندروید (API) مجموعه ای از واسط های پلتفرم اندروید است که در معرض برنامه هایی است که در محیط زمان اجرا مدیریت شده اجرا می شوند.

پیاده سازی دستگاه:

  • [C-0-1] باید پیاده سازی های کاملی ، از جمله کلیه رفتارهای مستند ، از هر API مستند که توسط Android SDK یا هر API تزئین شده با نشانگر "SystemApi" در کد منبع Android بالادست را ارائه می دهد ، ارائه دهد.

  • [C-0-2] باید از کلیه کلاس ها ، روش ها و عناصر مرتبط با آن که توسط حاشیه نویسی تستاپی (testapi) مشخص شده است ، پشتیبانی و حفظ کند.

  • [C-0-3] نباید هیچ API های مدیریت شده ، واسط ها یا امضاهای API را تغییر دهد ، از رفتار مستند منحرف شود ، یا مواردی را شامل نمی شود ، به جز مواردی که به طور خاص توسط این تعریف سازگاری مجاز است.

  • [C-0-4] هنوز هم باید API ها را موجود نگه داشته و به روشی معقول رفتار کند ، حتی اگر برخی از ویژگی های سخت افزاری که Android شامل API است ، حذف شوند. برای الزامات خاص برای این سناریو به بخش 7 مراجعه کنید.

  • [C-0-5] باید استفاده از برنامه 3 رده استفاده از API های پنهان را محدود کند ، که به عنوان API در فضای نام اندرویدی که با حاشیه نویسی @hidden تزئین شده است اما نه با @SystemAPI یا @TestApi ، همانطور که در اسناد SDK توضیح داده شده است ، محدود شود. و با هر یک از API پنهان در همان لیست های محدود که از طریق لیست موقت و پرونده های دنییلیست در prebuilts/runtime/appcompat/ مسیر برای شاخه سطح API مناسب در AOSP ارائه می شود ، ارسال کنید. با این حال آنها:

    • ممکن است ، اگر یک API پنهان در اجرای دستگاه وجود ندارد یا متفاوت است ، API پنهان را به سمت دنیلاست منتقل کنید یا آن را از همه لیست های محدود حذف کنید.
    • ممکن است ، اگر یک API پنهان از قبل در AOSP وجود نداشته باشد ، API پنهان را به هر یک از لیست های محدود اضافه کنید.
    • ممکن است مکانیسم به روزرسانی پویا را اجرا کند که یک API پنهان را از یک لیست محدود به یک لیست کمتر محدود کننده منتقل می کند ، به جز Allowlist.

3.1.1. برنامه های افزودنی اندروید

Android شامل پشتیبانی از گسترش APIهای مدیریت شده در حالی که همان نسخه سطح API را حفظ می کند.

  • [C-0-1] ExtServices سازی دستگاه های Android باید اجرای AOSP هر دو کتابخانه مشترک ExtShared و خدمات را با نسخه های بالاتر از یا مساوی با حداقل نسخه های مجاز در هر سطح API بارگذاری کند. به عنوان مثال، پیاده‌سازی‌های دستگاه Android 7.0 با اجرای API سطح 24 باید حداقل شامل نسخه 1 باشد.

3.1.2. کتابخانه اندروید

با توجه به استهلاک مشتری Apache HTTP ، پیاده سازی دستگاه:

  • [C-0-1] نباید کتابخانه org.apache.http.legacy را در BootClassPath قرار دهید.
  • [c-0-2] باید کتابخانه org.apache.http.legacy را به برنامه کاربردی برنامه اضافه کنید فقط در صورتی که برنامه یکی از شرایط زیر را برآورده کند:
    • API سطح 28 یا پایین را هدف قرار می دهد.
    • در آشکار خود اعلام می کند که با تنظیم android:name ویژگی <uses-library> به org.apache.http.legacy نیاز به کتابخانه دارد.

اجرای AOSP این شرایط را برآورده می کند.

3.2. سازگاری نرم افزار API

علاوه بر APIهای مدیریت شده از بخش 3.1 ، Android همچنین شامل یک API "نرم" فقط زمان اجرا قابل توجه است، به شکل مواردی مانند intent ها، مجوزها، و جنبه های مشابه برنامه های Android که در زمان کامپایل برنامه قابل اجرا نیستند.

3.2.1. مجوزها

  • [C-0-1] مجریان دستگاه باید تمام ثابت های مجوز را مطابق با صفحه مرجع اجازه پشتیبانی و اجرا کنند. توجه داشته باشید که بخش 9 الزامات اضافی مربوط به مدل امنیتی اندروید را فهرست می کند.

3.2.2. ساخت پارامترها

APIهای Android شامل تعدادی ثابت در کلاس android.os.Build هستند که برای توصیف دستگاه فعلی در نظر گرفته شده است.

  • [C-0-1] برای ارائه مقادیر مداوم و معنی دار در سراسر پیاده سازی دستگاه ، جدول زیر شامل محدودیت های اضافی در قالب های این مقادیر است که اجرای دستگاه باید با آنها مطابقت داشته باشد.
پارامتر جزئیات
VERSION.RELEASE نسخه سیستم اندروید در حال اجرا، در قالب قابل خواندن توسط انسان. این قسمت باید یکی از مقادیر رشته تعریف شده در 9 را داشته باشد.
VERSION.SDK نسخه سیستم Android در حال اجرا، در قالبی که برای کد برنامه شخص ثالث قابل دسترسی است. برای Android 9 ، این قسمت باید دارای مقدار عدد صحیح 9_int باشد.
VERSION.SDK_INT نسخه سیستم Android در حال اجرا، در قالبی که برای کد برنامه شخص ثالث قابل دسترسی است. برای Android 9 ، این قسمت باید دارای مقدار عدد صحیح 9_int باشد.
VERSION.INCREMENTAL مقداری که توسط پیاده‌کننده دستگاه انتخاب شده است که ساختار خاص سیستم Android در حال اجرا را در قالب قابل خواندن توسط انسان تعیین می‌کند. این مقدار نباید برای ساخت‌های مختلفی که در دسترس کاربران نهایی قرار گرفته‌اند دوباره استفاده شود. یک استفاده معمولی از این فیلد این است که نشان دهد کدام شماره ساخت یا شناسه تغییر منبع-کنترل برای تولید بیلد استفاده شده است. هیچ الزامی برای قالب خاص این فیلد وجود ندارد، به جز اینکه نباید خالی یا رشته خالی ("") باشد.
هیئت مدیره مقداری که توسط پیاده‌کننده دستگاه انتخاب می‌شود و سخت‌افزار داخلی خاص مورد استفاده دستگاه را در قالب قابل خواندن توسط انسان شناسایی می‌کند. یکی از کاربردهای احتمالی این فیلد نشان دادن بازبینی خاص برد تغذیه کننده دستگاه است. مقدار این فیلد باید به صورت ASCII 7 بیتی قابل رمزگذاری باشد و با عبارت منظم «^[a-zA-Z0-9_-]+$ مطابقت داشته باشد.
نام تجاری مقداری که نشان دهنده نام تجاری مرتبط با دستگاه است که برای کاربران نهایی شناخته شده است. باید در قالب قابل خواندن برای انسان باشد و باید نماینده سازنده دستگاه یا برند شرکتی باشد که دستگاه تحت آن به بازار عرضه می شود. مقدار این فیلد باید به صورت ASCII 7 بیتی قابل رمزگذاری باشد و با عبارت منظم «^[a-zA-Z0-9_-]+$ مطابقت داشته باشد.
SUPPORTED_ABIS نام مجموعه دستورالعمل (نوع CPU + قرارداد ABI) کد بومی. بخش 3.3 را ببینید. سازگاری Native API .
SUPPORTED_32_BIT_ABIS نام مجموعه دستورالعمل (نوع CPU + قرارداد ABI) کد بومی. بخش 3.3 را ببینید. سازگاری Native API .
SUPPORTED_64_BIT_ABIS نام مجموعه دستورات دوم (نوع CPU + قرارداد ABI) کد بومی. بخش 3.3 را ببینید. سازگاری Native API .
CPU_ABI نام مجموعه دستورالعمل (نوع CPU + قرارداد ABI) کد بومی. بخش 3.3 را ببینید. سازگاری Native API .
CPU_ABI2 نام مجموعه دستورات دوم (نوع CPU + قرارداد ABI) کد بومی. بخش 3.3 را ببینید. سازگاری Native API .
DEVICE مقداری که توسط پیاده‌کننده دستگاه انتخاب می‌شود که حاوی نام توسعه یا نام کد است که پیکربندی ویژگی‌های سخت‌افزاری و طراحی صنعتی دستگاه را مشخص می‌کند. مقدار این فیلد باید به صورت ASCII 7 بیتی قابل رمزگذاری باشد و با عبارت منظم «^[a-zA-Z0-9_-]+$ مطابقت داشته باشد. این نام دستگاه نباید در طول عمر محصول تغییر کند.
اثر انگشت رشته ای که به طور منحصر به فرد این ساخت را مشخص می کند. باید به طور منطقی برای انسان قابل خواندن باشد. باید از این الگو پیروی کند:

$(BRAND)/$(محصول)/
$(DEVICE):$(VERSION.RELEASE)/$(ID)/$(VERSION.INCREMENTAL):$(TYPE)/$(TAGS)

مثلا:

acme/myproduct/
MyDevice: 9/lmyxx/3359: userdebug/key-keys

اثر انگشت نباید شامل کاراکترهای فضای خالی باشد. اگر سایر فیلدهای موجود در الگوی بالا دارای نویسه‌های فضای خالی هستند، آنها باید در اثر انگشت ساخت با نویسه دیگری مانند نویسه زیرخط ("_") جایگزین شوند. مقدار این فیلد باید به صورت ASCII 7 بیتی قابل رمزگذاری باشد.

سخت افزار نام سخت افزار (از خط فرمان هسته یا /proc). باید به طور منطقی برای انسان قابل خواندن باشد. مقدار این فیلد باید به صورت ASCII 7 بیتی قابل رمزگذاری باشد و با عبارت منظم «^[a-zA-Z0-9_-]+$ مطابقت داشته باشد.
میزبان رشته‌ای که به‌طور منحصربه‌فرد میزبانی را که ساخت بر روی آن ساخته شده است، در قالب قابل خواندن توسط انسان شناسایی می‌کند. هیچ الزامی برای قالب خاص این فیلد وجود ندارد، به جز اینکه نباید خالی یا رشته خالی ("") باشد.
شناسه شناسه‌ای که توسط پیاده‌کننده دستگاه برای ارجاع به یک نسخه خاص، در قالب قابل خواندن توسط انسان انتخاب شده است. این فیلد می تواند همان android.os.Build.VERSION.INCREMENTAL باشد، اما باید مقداری باشد که به اندازه کافی معنی دار باشد تا کاربران نهایی بتوانند بین ساخت های نرم افزار تمایز قائل شوند. مقدار این فیلد باید به صورت ASCII 7 بیتی قابل رمزگذاری باشد و با عبارت منظم «^[a-zA-Z0-9._-]+$ مطابقت داشته باشد.
سازنده نام تجاری سازنده اصلی تجهیزات (OEM) محصول. هیچ الزامی برای قالب خاص این فیلد وجود ندارد، به جز اینکه نباید خالی یا رشته خالی ("") باشد. این زمینه نباید در طول عمر محصول تغییر کند.
مدل مقداری که توسط پیاده‌کننده دستگاه انتخاب شده و حاوی نام دستگاهی است که کاربر نهایی آن را می‌شناسد. این باید همان نامی باشد که دستگاه تحت آن به بازار عرضه شده و به کاربران نهایی فروخته می شود. هیچ الزامی برای قالب خاص این فیلد وجود ندارد، به جز اینکه نباید خالی یا رشته خالی ("") باشد. این زمینه نباید در طول عمر محصول تغییر کند.
تولید - محصول مقداری انتخاب شده توسط پیاده‌کننده دستگاه حاوی نام توسعه یا نام کد محصول خاص (SKU) که ​​باید در همان برند منحصر به فرد باشد. باید برای انسان قابل خواندن باشد، اما لزوماً برای مشاهده توسط کاربران نهایی در نظر گرفته نشده است. مقدار این فیلد باید به صورت ASCII 7 بیتی قابل رمزگذاری باشد و با عبارت منظم «^[a-zA-Z0-9_-]+$ مطابقت داشته باشد. این نام محصول نباید در طول عمر محصول تغییر کند.
سریال باید "ناشناخته" برگردد.
برچسب ها فهرستی از برچسب‌های جدا شده با کاما که توسط پیاده‌کننده دستگاه انتخاب شده‌اند که ساخت را بیشتر متمایز می‌کند. این فیلد باید دارای یکی از مقادیر مربوط به سه پیکربندی معمولی امضای پلتفرم اندروید باشد: کلیدهای انتشار، کلیدهای توسعه، کلیدهای تست.
زمان مقداری که نشان‌دهنده مُهر زمانی زمان وقوع ساخت است.
تایپ کنید مقداری که توسط پیاده‌کننده دستگاه انتخاب شده و پیکربندی زمان اجرا ساخت را مشخص می‌کند. این فیلد باید دارای یکی از مقادیر مربوط به سه پیکربندی معمول زمان اجرای Android باشد: user، userdebug یا eng.
کاربر نام یا شناسه کاربری کاربر (یا کاربر خودکار) که ساخت را ایجاد کرده است. هیچ الزامی برای قالب خاص این فیلد وجود ندارد، به جز اینکه نباید خالی یا رشته خالی ("") باشد.
SECURITY_PATCH مقداری که سطح وصله امنیتی یک ساخت را نشان می دهد. این باید نشان دهد که ساخت به هیچ وجه در برابر هیچ یک از مسائلی که از طریق بولتن امنیت عمومی تعیین شده Android توضیح داده شده آسیب پذیر نیست. باید در قالب [YYYY-MM-DD] باشد، که با یک رشته تعریف شده مستند شده در بولتن امنیت عمومی Android یا در مشاوره امنیتی Android ، برای مثال "01-11-2015" مطابقت داشته باشد.
BASE_OS مقداری نشان‌دهنده پارامتر FINGERPRINT ساخت‌وساز که در غیر این صورت با این بیلد یکسان است به جز وصله‌های ارائه‌شده در بولتن امنیت عمومی Android. باید مقدار صحیح را گزارش کند و اگر چنین ساختی وجود نداشت، یک رشته خالی ("") را گزارش کنید.
بوت لودر مقداری که توسط مجری دستگاه انتخاب شده است که نسخه خاص بوت لودر داخلی مورد استفاده در دستگاه را با فرمت قابل خواندن انسانی مشخص می کند. مقدار این فیلد باید به صورت ASCII 7 بیتی قابل رمزگذاری باشد و با عبارت منظم «^[a-zA-Z0-9._-]+$ مطابقت داشته باشد.
getRadioVersion () باید مقدار انتخاب شده توسط مجری دستگاه را که نسخه ویژه رادیو/مودم داخلی مورد استفاده در دستگاه را با فرمت قابل خواندن انسانی مشخص می کند ، انتخاب کند. اگر دستگاهی رادیو/مودم داخلی نداشته باشد ، باید تهی را برگرداند. مقدار این قسمت باید به عنوان ASCII 7 بیتی رمزگذاری شود و با بیان منظم "^[A-ZA-Z0-9 ._- ،]+$" مطابقت داشته باشد.
geterial () باید شماره سریال سخت افزاری (باید باشد یا برگردد) ، که باید در بین دستگاه ها با همان مدل و تولید کننده در دسترس و منحصر به فرد باشد. مقدار این قسمت باید به عنوان ASCII 7 بیتی رمزگذاری شود و با بیان منظم "^[A-ZA-Z0-9 ._- ،]+$" مطابقت داشته باشد.

3.2.3. سازگاری قصد

3.2.3.1. اهداف اصلی برنامه

اهداف Android به اجزای برنامه اجازه می دهد تا عملکرد را از سایر اجزای Android درخواست کنند. پروژه بالادستی اندروید شامل لیستی از برنامه‌های کاربردی است که برنامه‌های اصلی اندروید در نظر گرفته می‌شوند که چندین الگوی هدف را برای انجام اقدامات رایج پیاده‌سازی می‌کنند.

  • [C-0-1] پیاده سازی دستگاه باید یک یا چند برنامه یا مؤلفه های خدمات را با یک کنترل کننده قصد بارگذاری کند ، برای کلیه الگوهای فیلتر قصد عمومی که توسط برنامه های اصلی Android در AOSP تعریف شده است:

    • ساعت رومیزی
    • مرورگر
    • تقویم
    • مخاطب
    • آلبوم عکس
    • جستجوی جهانی
    • پرتاب کننده
    • موسیقی
    • تنظیمات
3.2.3.2. تفکیک قصد
  • [C-0-1] از آنجا که Android یک بستر قابل گسترش است ، اجرای دستگاه باید به هر الگوی قصد ارجاع شده در بخش 3.2.3.1 ، به جز تنظیمات ، توسط برنامه های شخص ثالث نادیده گرفته شود. اجرای منبع باز آندروید بالادست این امکان را به طور پیش فرض فراهم می کند.

  • [C-0-2] مجریان DVICE نباید امتیازات ویژه ای را برای استفاده از برنامه های سیستم از این الگوهای هدف وصل کنند ، یا از اتصال به وصل کردن و فرض کنترل این الگوها جلوگیری کنند. این ممنوعیت به‌طور خاص شامل غیرفعال کردن رابط کاربری «انتخاب کننده» است که به کاربر اجازه می‌دهد بین چند برنامه‌ای که همگی الگوی هدف یکسانی دارند، انتخاب کند.

  • [C-0-3] پیاده سازی دستگاه باید یک رابط کاربری را برای کاربران فراهم کند تا فعالیت پیش فرض برای اهداف را اصلاح کنند.

  • با این حال، پیاده‌سازی دستگاه ممکن است فعالیت‌های پیش‌فرض را برای الگوهای URI خاص (به‌عنوان مثال http://play.google.com) ارائه دهد، زمانی که فعالیت پیش‌فرض ویژگی خاصی را برای URI داده ارائه می‌کند. به عنوان مثال، یک الگوی فیلتر هدف که URI داده "http://www.android.com" را مشخص می کند، از الگوی هدف اصلی مرورگر برای "http://" خاص تر است.

Android همچنین دارای مکانیزمی برای برنامه‌های شخص ثالث است تا رفتار پیوند دادن برنامه پیش‌فرض معتبر را برای انواع خاصی از اهداف URI وب اعلام کنند. وقتی چنین اعلان‌های معتبری در الگوهای فیلتر قصد برنامه تعریف می‌شوند، پیاده‌سازی دستگاه:

  • [C-0-4] باید با انجام مراحل اعتبار سنجی تعریف شده در مشخصات پیوندهای دارایی دیجیتال ، که توسط مدیر بسته در پروژه منبع باز اندرویدی بالادست اجرا شده است ، سعی در تأیید هرگونه فیلتر قصد داشته باشد.
  • [C-0-5] باید در هنگام نصب برنامه ، اعتبار سنجی فیلترهای هدف را انجام دهد و تمام فیلترهای با موفقیت معتبر URI را به عنوان گیرنده برنامه پیش فرض برای URI خود تنظیم کند.
  • ممکن است فیلترهای هدف URI خاص را به عنوان کنترل‌کننده برنامه پیش‌فرض برای URI‌هایشان تنظیم کند، در صورتی که با موفقیت تأیید شوند اما سایر فیلترهای URI کاندید تأیید نشوند. اگر پیاده‌سازی دستگاهی این کار را انجام دهد، باید در منوی تنظیمات، الگوی هر URI مناسب را به کاربر ارائه دهد.
  • باید کنترل‌های پیوندهای برنامه هر برنامه را در تنظیمات به شرح زیر در اختیار کاربر قرار دهد:
    • [C-0-6] کاربر باید بتواند به طور کامل از رفتار برنامه پیش فرض رفتار برای برنامه استفاده کند: همیشه باز ، همیشه سؤال کنید ، یا هرگز باز نکنید ، که باید برای همه فیلترهای قصد URI نامزد به طور یکسان اعمال شود.
    • [C-0-7] کاربر باید بتواند لیستی از فیلترهای قصد URI نامزد را ببیند.
    • پیاده‌سازی دستگاه ممکن است به کاربر این امکان را بدهد که فیلترهای هدف URI کاندید خاصی را که با موفقیت تأیید شده‌اند، بر اساس فیلتر هر قصد لغو کند.
    • [C-0-8] اجرای دستگاه باید در صورتی که اجرای دستگاه به برخی از فیلترهای قصد URI اجازه می دهد تا در حالی که برخی دیگر می توانند شکست بخورند ، امکان مشاهده و نادیده گرفتن فیلترهای خاص URI را در اختیار کاربران قرار دهند.
3.2.3.3. Intent Namespaces
  • [C-0-1] پیاده سازی دستگاه ها نباید شامل هیچ مؤلفه اندرویدی باشد که از هرگونه قصد جدید یا الگوهای قصد پخش با استفاده از یک عمل ، دسته یا سایر رشته های کلیدی موجود در Android افتخار می کند. یا com.android. فضای نام
  • [C-0-2] مجریان دستگاه نباید هیچ مؤلفه اندرویدی را که از هرگونه قصد جدید یا الگوهای قصد پخش استفاده می کنند ، با استفاده از یک عمل ، دسته یا سایر رشته های کلیدی در یک فضای بسته متعلق به سازمان دیگر ، درج کنند.
  • [C-0-3] مجریان دستگاه نباید هیچ یک از الگوهای هدف مورد استفاده توسط برنامه های اصلی ذکر شده در بخش 3.2.3.1 را تغییر داده یا گسترش دهند.
  • پیاده سازی دستگاه ممکن است شامل الگوهای هدف با استفاده از فضاهای نام به وضوح و آشکارا با سازمان خود باشد. این ممنوعیت مشابه آن چیزی است که برای کلاس های زبان جاوا در بخش 3.6 مشخص شده است.
3.2.3.4. اهداف پخش

برنامه های شخص ثالث برای پخش مقاصد خاصی به پلتفرم متکی هستند تا تغییرات در محیط سخت افزاری یا نرم افزاری را به آنها اطلاع دهند.

پیاده سازی دستگاه:

  • [C-0-1] باید در پاسخ به رویدادهای سیستم مناسب ، همانطور که در مستندات SDK توضیح داده شده است ، اهداف پخش عمومی را پخش کند. توجه داشته باشید که این نیاز با بخش 3.5 متناقض نیست زیرا محدودیت برنامه های پس زمینه نیز در مستندات SDK شرح داده شده است.
3.2.3.5. تنظیمات پیش فرض برنامه

Android شامل تنظیماتی است که به کاربران راهی آسان برای انتخاب برنامه های پیش فرض خود، به عنوان مثال برای صفحه اصلی یا پیامک، ارائه می دهد.

در مواردی که منطقی است، پیاده‌سازی دستگاه باید منوی تنظیمات مشابهی را ارائه دهد و با الگوی فیلتر هدف و روش‌های API که در مستندات SDK به شرح زیر توضیح داده شده است، سازگار باشد.

اگر پیاده سازی دستگاه android.software.home_screen را گزارش کنید ، آنها:

  • [C-1-1] باید به android.settings.HOME_SETTINGS قصد نشان دادن منوی تنظیمات برنامه پیش فرض برای صفحه اصلی را نشان دهد.

اگر اجرای دستگاه android.hardware.telephony را گزارش می کند ، آنها:

  • [C-2-1] باید یک منوی تنظیمات را ارائه دهد که با android.provider.Telephony.ACTION_CHANGE_DEFAULT قصد نشان دادن یک گفتگو برای تغییر برنامه SMS پیش فرض را داشته باشد.

  • [C-2-2] باید از android.telecom.action.CHANGE_DEFAULT_DIALER برای نشان دادن گفتگوی احترام بگذارد تا کاربر بتواند برنامه تلفن پیش فرض را تغییر دهد.

    • برای تماسهای ورودی و خروجی به جز تماس های اضطراری ، که از برنامه تلفن از پیش نصب شده استفاده می کند ، باید از UI برنامه پیش فرض کاربر انتخاب شده استفاده کنید.
  • [C-2-3] باید از Android.telecom.action.action.change_phone_accounts به منظور تأمین هزینه کاربر برای پیکربندی ConnectionServices مرتبط با PhoneAccounts ، و همچنین واج های پیش فرض که ارائه دهنده خدمات ارتباطات از راه دور برای برقراری تماس های خروجی استفاده می کند ، احترام بگذارید. اجرای AOSP با درج منوی "گزینه حساب کاربری" در منوی تنظیمات "تماس" ، این نیاز را برآورده می کند.

اگر اجرای دستگاه android.hardware.nfc.hce را گزارش می کند ، آنها:

  • [C-3-1] باید از Android.settings.nfc_payment_settings قصد نشان دادن منوی تنظیمات برنامه پیش فرض برای شیر و پرداخت را داشته باشد.

اگر پیاده سازی دستگاه از VoiceInteractionService پشتیبانی کرده و بیش از یک برنامه با استفاده از این API در یک زمان نصب شده باشد ، آنها:

3.2.4. فعالیت در نمایشگرهای ثانویه

اگر پیاده سازی دستگاه ها امکان راه اندازی فعالیت های عادی اندرویدی را در نمایشگرهای ثانویه فراهم می کند ، آنها:

  • [C-1-1] باید پرچم ویژگی android.software.activities_on_secondary_displays را تنظیم کند.
  • [C-1-2] باید سازگاری API مشابه فعالیتی را که در صفحه اصلی اجرا می شود ، تضمین کند.
  • [C-1-3] باید هنگامی که فعالیت جدید بدون مشخص کردن صفحه نمایش هدف از طریق ActivityOptions.setLaunchDisplayId() API ، فعالیت جدید را در همان نمایشگر فعالیتی که آن را راه اندازی کرده است ، وارد کنید.
  • [C-1-4] باید تمام فعالیت ها را از بین ببرد ، هنگامی که یک صفحه نمایش با پرچم Display.FLAG_PRIVATE برداشته می شود.
  • [C-1-5] در صورت تغییر اندازه خود ، باید تمام فعالیت های موجود در یک VirtualDisplay را تغییر اندازه دهد.
  • ممکن است هنگامی که یک قسمت ورودی متن روی یک صفحه نمایش ثانویه متمرکز شود ، یک IME (ویرایشگر روش ورودی ، یک کنترل کاربر که کاربران را قادر به وارد کردن متن می کند) نشان دهد.
  • باید تمرکز ورودی را بر روی صفحه ثانویه به طور مستقل از صفحه اصلی ، هنگامی که از ورودی های لمسی یا کلیدی پشتیبانی می شود ، پیاده سازی کنید.
  • باید دارای android.content.res.Configuration باشد که مطابق با آن نمایشگر باشد تا نمایش داده شود ، به درستی کار کند و در صورت راه اندازی فعالیت در صفحه ثانویه ، سازگاری را حفظ کند.

اگر پیاده سازی دستگاه ها اجازه راه اندازی فعالیت های عادی Android را در نمایشگرهای ثانویه و نمایشگرهای اولیه و ثانویه دارای Android.util.displaymetrics مختلف دارند:

  • [C-2-1] فعالیت های غیر قابل تنظیم (که دارای resizeableActivity=false در AndroidManifest.xml هستند) و برنامه هایی که API سطح 23 یا پایین را هدف قرار می دهند ، نباید در نمایشگرهای ثانویه مجاز باشند.

اگر پیاده سازی دستگاه اجازه راه اندازی فعالیت های عادی اندرویدی در نمایشگرهای ثانویه و صفحه نمایش ثانویه دارای پرچم android.view.display.flag_private :

  • [C-3-1] فقط صاحب آن نمایشگر ، سیستم و فعالیتهایی که در حال حاضر در آن نمایشگر هستند باید بتوانند به آن راه اندازی شوند. همه می توانند به صفحه نمایش راه اندازی کنند که دارای پرچم Android.view.display.flag_public باشد.

3.3. سازگاری Native API

سازگاری کد بومی چالش برانگیز است. به همین دلیل ، مجریان دستگاه عبارتند از:

  • [SR] به شدت توصیه می شود از پیاده سازی کتابخانه های ذکر شده در زیر از پروژه منبع باز اندرویدی بالادست استفاده کنید.

3.3.1. رابط های باینری برنامه

بایت کد Dalvik مدیریت شده می تواند به کد بومی ارائه شده در فایل .apk برنامه به عنوان یک فایل ELF .so که برای معماری سخت افزاری مناسب دستگاه کامپایل شده است، فراخوانی کند. از آنجایی که کد بومی به شدت به فناوری پردازنده اصلی وابسته است، اندروید تعدادی رابط باینری برنامه (ABI) را در Android NDK تعریف می‌کند.

پیاده سازی دستگاه:

  • [C-0-1] باید با یک یا چند ABI تعریف شده سازگار باشد و سازگاری را با Android NDK پیاده سازی کند.
  • [C-0-2] باید با استفاده از معانی استاندارد رابط بومی جاوا (JNI) ، پشتیبانی از کد در حال اجرا در محیط مدیریت شده را برای تماس با کد بومی داشته باشد.
  • [C-0-3] باید سازگار با منبع (یعنی سازگار با هدر) و سازگار با دودویی (برای ABI) با هر کتابخانه مورد نیاز در لیست زیر باشد.
  • [C-0-5] باید به طور دقیق از رابط باینری برنامه بومی (ABI) پشتیبانی شده توسط دستگاه ، از طریق android.os.Build.SUPPORTED_ABIS ، android.os.Build.SUPPORTED_32_BIT_ABIS ، و android.os.Build.SUPPORTED_64_BIT_ABIS پارامترهای گزارش دهید. ، هر یک از لیست کاما از ABIS که از بیشترین تا کمترین ترجیحی سفارش داده می شود ، جدا شده است.
  • [C-0-6] باید از طریق پارامترهای فوق ، زیر مجموعه ای از لیست زیر ABI ها را گزارش کند و نباید هیچ ABI را در لیست گزارش دهد.

    • armeabi
    • armeabi-v7a
    • arm64-v8a
    • x86
    • x86-64
    • [C-0-7] باید تمام کتابخانه های زیر را تهیه کند ، API های بومی را در دسترس برنامه هایی قرار دهد که شامل کد بومی هستند:

    • libaaudio.so (پشتیبانی صوتی بومی Aaudio)

    • libandroid.so (پشتیبانی از فعالیت های Android بومی)
    • libc (کتابخانه C)
    • libcamera2ndk.so
    • libdl (پیوند دهنده پویا)
    • libEGL.so (مدیریت سطح OpenGL بومی)
    • libGLESv1_CM.so (OpenGL ES 1.x)
    • libGLESv2.so (OpenGL ES 2.0)
    • libGLESv3.so (OpenGL ES 3.x)
    • libicui18n.so
    • libicuuc.so
    • libjnigraphics.so
    • liblog (لاگ اندروید)
    • libmediandk.so (پشتیبانی از APIهای رسانه بومی)
    • libm (کتابخانه ریاضی)
    • libneuralnetworks.so (شبکه های عصبی API)
    • libOpenMAXAL.so (پشتیبانی از OpenMAX AL 1.0.1)
    • libOpenSLES.so (پشتیبانی صوتی OpenSL ES 1.0.1)
    • libRS.so
    • libstdc++ (حداقل پشتیبانی از C++)
    • libvulkan.so (ولکان)
    • libz (فشرده سازی Zlib)
    • رابط JNI
  • [C-0-8] نباید کارکردهای عمومی را برای کتابخانه های بومی ذکر شده در بالا اضافه یا حذف کند.

  • [C-0-9] باید کتابخانه های غیر ASOP اضافی را که مستقیماً در معرض برنامه های شخص ثالث قرار دارند در /vendor/etc/public.libraries.txt ذکر کنید.
  • [C-0-10] نباید هیچ یک از کتابخانه های بومی دیگر را که در AOSP به عنوان کتابخانه های سیستم اجرا شده و ارائه شده اند ، در معرض برنامه های شخص ثالث قرار دهند که سطح 24 یا بالاتر را هدف قرار می دهند.
  • [C-0-11] باید از طریق کتابخانه libGLESv3.so ، تمام نمادهای عملکرد بسته بندی OpenGL ES 3.1 و Android را ، همانطور که در NDK تعریف شده است ، صادر کنید. توجه داشته باشید که در حالی که تمام نمادها باید حضور داشته باشند ، بخش 7.1.4.1 با جزئیات بیشتر الزامات مربوط به زمان پیش بینی اجرای کامل هر کارکرد مربوطه را توضیح می دهد.
  • [c-0-12] باید نمادهای عملکردی libvulkan.so برای نمادهای اصلی عملکرد Vulkan 1.0 ، و همچنین VK_KHR_surface ، VK_KHR_android_surface ، VK_KHR_swapchain ​​، VK_KHR_maintenance1 ، و VK_KHR_get_physical_device_properties2 توجه داشته باشید که در حالی که تمام نمادها باید حضور داشته باشند ، بخش 7.1.4.2 با جزئیات بیشتر الزامات مربوط به زمان پیش بینی اجرای کامل هر کارکرد مربوطه را توضیح می دهد.
  • باید با استفاده از کد منبع و فایل‌های سرصفحه موجود در پروژه منبع باز اندروید بالادست ساخته شود

توجه داشته باشید که نسخه های آینده اندروید ممکن است پشتیبانی از ABI های اضافی را معرفی کند.

3.3.2. سازگاری با کد اصلی ARM 32 بیتی

اگر پیاده سازی دستگاه از پشتیبانی armeabi ABI گزارش می دهد ، آنها:

  • [C-3-1] همچنین باید از armeabi-v7a پشتیبانی کند و پشتیبانی آن را گزارش کند ، زیرا armeabi فقط برای سازگاری به عقب با برنامه های قدیمی تر است.

اگر پیاده سازی دستگاه از پشتیبانی armeabi-v7a abi ، برای برنامه هایی که از این ABI استفاده می کنند گزارش می دهند ، آنها:

  • [C-2-1] باید خطوط زیر را در /proc/cpuinfo قرار دهد ، و نباید مقادیر موجود در همان دستگاه را تغییر دهد ، حتی اگر توسط سایر ABI ها خوانده شود.

    • Features: به دنبال آن لیستی از هر ویژگی CPU اختیاری ARMV7 که توسط دستگاه پشتیبانی می شود.
    • CPU architecture: به دنبال آن یک عدد صحیح توصیف شده از معماری بازوی پشتیبانی شده دستگاه (به عنوان مثال ، "8" برای دستگاه های ARMV8).
  • [C-2-2] همیشه باید عملیات زیر را در دسترس نگه دارید ، حتی در مواردی که ABI در یک معماری ARMV8 اجرا می شود ، چه از طریق پشتیبانی از CPU بومی یا از طریق شبیه سازی نرم افزار:

    • دستورالعمل SWP و SWPB.
    • دستورالعمل تنظیم
    • عملیات سد CP15ISB ، CP15DSB و CP15DMB.
  • [C-2-3] باید شامل پشتیبانی از پسوند Advanced SIMD (AKA NEON) باشد.

3.4. سازگاری وب

3.4.1. سازگاری WebView

اگر پیاده سازی دستگاه اجرای کامل android.webkit.Webview API را ارائه دهد ، آنها:

  • [C-1-1] باید android.software.webview گزارش کند.
  • [C-1-2] برای اجرای android.webkit.WebView API باید از پروژه Chromium Build از پروژه منبع باز اندرویدی بالادست در شاخه Android 9 استفاده کند.
  • [C-1-3] رشته عامل کاربر گزارش شده توسط WebView باید در این قالب باشد:

    Mozilla/5.0 (Linux ؛ Android $ (نسخه) ؛ [$ (مدل)] [Build/$ (ساخت)] ؛ WV) AppleWebKit/537.36 (KHTML ، مانند Gecko) نسخه/4.0 $ (Chromium_ver) Safari/537.36

    • مقدار رشته $(VERSION) باید با مقدار android.os.Build.VERSION.RELEASE یکسان باشد.
    • رشته $ (مدل) ممکن است خالی باشد ، اما اگر خالی نباشد ، باید همان مقدار Android.os.build.model را داشته باشد.
    • "ساخت/$ (ساخت)" ممکن است حذف شود ، اما در صورت وجود رشته $ (ساخت) باید برابر با مقدار Android.os.build.id باشد.
    • مقدار رشته $(CHROMIUM_VER) باید نسخه Chromium در پروژه منبع باز Android بالادستی باشد.
    • پیاده سازی دستگاه ممکن است Mobile را در رشته عامل کاربر حذف کند.
  • مؤلفه WebView باید تا حد امکان از ویژگی های HTML5 پشتیبانی کند و اگر از ویژگی پشتیبانی می کند باید با مشخصات HTML5 مطابقت داشته باشد.

3.4.2. سازگاری مرورگر

اگر پیاده سازی دستگاه شامل یک مرورگر مرورگر مستقل برای مرور وب عمومی است ، آنها:

  • [C-1-1] باید از هر یک از این API های مرتبط با HTML5 پشتیبانی کند:
  • [C-1-2] باید از API HTML5/W3C WebStorage API پشتیبانی کند و باید از API HTML5/W3C IndexedDB پشتیبانی کند. توجه داشته باشید که از آنجا که بدنهای توسعه وب در حال انتقال به نفع IndexedDB از طریق وب سایت هستند ، انتظار می رود IndexedDB در نسخه بعدی Android به یک مؤلفه مورد نیاز تبدیل شود.
  • ممکن است یک رشته عامل کاربر سفارشی را در برنامه مرورگر مستقل حمل کند.
  • باید پشتیبانی را برای هرچه بیشتر HTML5 در برنامه مرورگر مستقل (اعم از برنامه مرورگر بالادست WebKit یا جایگزینی شخص ثالث) پشتیبانی کند.

با این حال ، اگر اجرای دستگاه شامل یک مرورگر مستقل نیست ، آنها:

  • [C-2-1] هنوز هم باید از الگوهای هدف عمومی همانطور که در بخش 3.2.3.1 توضیح داده شده است پشتیبانی کند.

3.5. سازگاری رفتاری API

پیاده سازی دستگاه:

  • [C-0-9] باید اطمینان حاصل کند که سازگاری رفتاری API برای همه برنامه های نصب شده اعمال می شود ، مگر اینکه آنها مطابق بخش 3.5.1 محدود شوند.
  • [C-0-10] نباید رویکرد لیست لیست را که سازگاری رفتاری API را فقط برای برنامه هایی که توسط مجریان دستگاه انتخاب می شوند ، تضمین کند.

رفتارهای هر یک از انواع API (مدیریت شده ، نرم ، بومی و وب) باید با اجرای ارجح پروژه منبع باز اندرویدی بالادست سازگار باشد. برخی از زمینه های خاص سازگاری عبارتند از:

  • [C-0-1] دستگاه ها نباید رفتار یا معناشناسی یک هدف استاندارد را تغییر دهند.
  • [C-0-2] دستگاه ها نباید معانی چرخه عمر یا چرخه حیات را از یک نوع خاص از مؤلفه سیستم (مانند سرویس ، فعالیت ، محتوای محتوای و غیره) تغییر دهند.
  • [C-0-3] دستگاه ها نباید معانی یک مجوز استاندارد را تغییر دهند.
  • دستگاه ها نباید محدودیت های اعمال شده در برنامه های پس زمینه را تغییر دهند. به طور خاص ، برای برنامه های پس زمینه:
    • [C-0-4] آنها باید برای دریافت خروجی از GnssMeasurement و GnssNavigationMessage ، از اجرای تماس های تماس تلفنی که توسط برنامه ثبت شده اند ، متوقف کنند.
    • [C-0-5] آنها باید فرکانس به روزرسانی هایی را که از طریق کلاس API LocationManager یا روش WifiManager.startScan() به برنامه ارائه می دهند ، محدود کنند.
    • [C-0-6] اگر برنامه در حال هدف قرار دادن API سطح 25 یا بالاتر باشد ، آنها نباید اجازه دهند گیرنده های پخش شده برای پخش های ضمنی از اهداف استاندارد Android در آشکار برنامه را ثبت کنند ، مگر اینکه قصد پخش نیاز به "signature" یا "signatureOrSystem" داشته باشد" "signatureOrSystem" مجوز protectionLevel یا در لیست معافیت قرار دارد.
    • [C-0-7] اگر برنامه در حال هدف قرار دادن API سطح 25 یا بالاتر باشد ، آنها باید خدمات پس زمینه برنامه را متوقف کنند ، دقیقاً مثل اینکه برنامه روش stopSelf() سرویس را نامیده بود ، مگر اینکه برنامه در یک لیست مجاز موقت قرار بگیرد برای انجام وظیفه ای که برای کاربر قابل مشاهده است.
    • [C-0-8] اگر برنامه در حال هدف قرار دادن API سطح 25 یا بالاتر باشد ، آنها باید Wakelocks را که برنامه در اختیار دارد منتشر کند.
  • [C-0-9] دستگاه ها باید ارائه دهندگان امنیتی زیر را به عنوان هفت مقادیر آرایه اول از روش Security.getProviders() ، به ترتیب داده شده و با نام های داده شده (همانطور که توسط Provider.getName() و کلاس ها برگشته اند) برگردانند. ، مگر اینکه برنامه لیست را از طریق insertProviderAt() یا removeProvider() اصلاح کند. دستگاه ها ممکن است ارائه دهندگان اضافی را پس از لیست مشخص شده ارائه دهندگان در زیر برگردانند.
    1. Androidnssp - android.security.net.config.NetworkSecurityConfigProvider
    2. Androidopenssl - com.android.org.conscrypt.OpenSSLProvider
    3. CertpathProvider - sun.security.provider.CertPathProvider
    4. AndroidKeyStoreBcworkAround - android.security.keystore.AndroidKeyStoreBCWorkaroundProvider
    5. BC - com.android.org.bouncycastle.jce.provider.BouncyCastleProvider
    6. Harmonyjsse - com.android.org.conscrypt.JSSEProvider
    7. Androidkeystore - android.security.keystore.AndroidKeyStoreProvider

لیست فوق جامع نیست. مجموعه تست سازگاری (CTS) بخش های قابل توجهی از سکوی سازگاری رفتاری را آزمایش می کند ، اما همه آنها نیست. این وظیفه مجری است که از سازگاری رفتاری با پروژه منبع باز اندروید اطمینان حاصل کند. به همین دلیل ، مجریان دستگاه باید از کد منبع موجود از طریق پروژه منبع باز اندروید در صورت امکان استفاده کنند ، نه اینکه مجدداً بخش های قابل توجهی از سیستم را اجرا کنند.

3.5.1. محدودیت پس زمینه

اگر پیاده سازی دستگاه محدودیت های برنامه را که در AOSP گنجانده شده یا محدودیت های برنامه را گسترش می دهد ، پیاده سازی کنید ، آنها:

  • [C-SR] به شدت توصیه می شود که در آنجا کاربر بتواند لیست برنامه های محدود را ببیند.
  • [C-1-2] برای روشن یا خاموش کردن محدودیت در هر برنامه باید هزینه کاربر را فراهم کند.
  • [C-1-3] نباید به طور خودکار محدودیت ها را بدون شواهدی از رفتار سلامت سیستم ضعیف اعمال کند ، اما ممکن است پس از تشخیص رفتارهای بهداشتی ضعیف سیستم مانند wakelocks گیر ، خدمات طولانی در حال اجرا و سایر معیارها ، محدودیت هایی را در برنامه ها اعمال کند. معیارها ممکن است توسط مجریان دستگاه تعیین شود اما باید مربوط به تأثیر برنامه بر سلامت سیستم باشد. معیارهای دیگری که صرفاً با سلامت سیستم مرتبط نیست ، مانند عدم محبوبیت برنامه در بازار ، نباید به عنوان معیارها استفاده شود.
  • [C-1-4] وقتی کاربر محدودیت برنامه را به صورت دستی خاموش کرده است ، نباید به طور خودکار محدودیت های برنامه را برای برنامه ها اعمال کند ، و ممکن است کاربر را به اعمال محدودیت های برنامه پیشنهاد دهد.
  • [C-1-5] در صورت اعمال محدودیت برنامه به طور خودکار برای یک برنامه ، باید به کاربران اطلاع دهد.
  • [C-1-6] وقتی برنامه محدود این API را صدا می کند ، باید برای ActivityManager.isBackgroundRestricted() true برگردد.
  • [C-1-7] نباید برنامه پیش زمینه برتر را که صریحاً توسط کاربر استفاده می شود ، محدود کند.
  • [C-1-8] باید محدودیت هایی را در برنامه ای که به عنوان برنامه برتر پیش زمینه تبدیل می شود ، به حالت تعلیق درآورد ، هنگامی که کاربر صریحاً شروع به استفاده از برنامه ای که قبلاً محدود می شود ، استفاده می کند.
  • [C-1-9] باید کلیه رویدادهای محدودیت برنامه را از طریق UsageStats گزارش دهد. اگر اجرای دستگاه محدودیت های برنامه ای را که در AOSP اجرا شده است ، گسترش می دهد ، باید از اجرای شرح داده شده در این سند پیروی کند.

3.6. فضاهای نام API

Android از کنوانسیون های فضای بسته بندی و کلاس تعریف شده توسط زبان برنامه نویسی جاوا پیروی می کند. برای اطمینان از سازگاری با برنامه های شخص ثالث ، مجریان دستگاه نباید هیچ گونه اصلاح ممنوعه ای (به زیر مراجعه کنید) در این قسمت های نام بسته بندی کنید:

  • java.*
  • javax.*
  • sun.*
  • android.*
  • androidx.*
  • com.android.*

یعنی آنها:

  • [C-0-1] نباید با تغییر هر روش یا امضاهای کلاس یا با حذف کلاس ها یا زمینه های کلاس ، API های عمومی را در معرض سیستم Android اصلاح کند.
  • [C-0-2] نباید هیچ عناصر در معرض عموم (مانند کلاس ها یا رابط ها ، یا زمینه ها یا روش ها را به کلاس ها یا رابط های موجود) اضافه کند) یا API های آزمایش یا سیستم را به API ها در نام های فوق اضافه کنید. "عنصر در معرض عموم" هر ساختاری است که با نشانگر "hide" تزئین نشده است که در کد منبع بالادست اندرویدی استفاده می شود.

مجریان دستگاه ممکن است اجرای اصلی API ها را تغییر دهند ، اما چنین تغییراتی را تغییر می دهند:

  • [C-0-3] نباید بر رفتار بیان شده و امضای زبان جاوا از هر API در معرض عموم تأثیر بگذارد.
  • [C-0-4] نباید تبلیغ شود یا در غیر این صورت در معرض توسعه دهندگان قرار گیرد.

با این حال ، مجریان دستگاه ممکن است API های سفارشی را در خارج از فضای نام استاندارد Android اضافه کنند ، اما API های سفارشی:

  • [C-0-5] نباید در فضای نام متعلق به یا به سازمان دیگری باشد. به عنوان مثال ، مجریان دستگاه نباید API را به com.google.* یا فضای نام مشابه: فقط Google ممکن است این کار را انجام دهد. به همین ترتیب ، Google نباید API را به فضای نام شرکت های دیگر اضافه کند.
  • [C-0-6] MUST be packaged in an Android shared library so that only apps that explicitly use them (via the <uses-library> mechanism) are affected by the increased memory usage of such APIs.

اگر یک مجری دستگاه پیشنهاد می کند یکی از فضای نام بسته های بالا را بهبود ببخشد (مانند اضافه کردن عملکرد جدید مفید به یک API موجود یا اضافه کردن API جدید) ، مجری باید از Source.android.com بازدید کند و روند کمک به تغییرات و تغییرات را آغاز کند. کد ، با توجه به اطلاعات موجود در آن سایت.

توجه داشته باشید که محدودیت های فوق با کنوانسیون های استاندارد برای نامگذاری API ها در زبان برنامه نویسی جاوا مطابقت دارد. این بخش به سادگی با هدف تقویت آن کنوانسیون ها و اتصال آنها از طریق گنجاندن در این تعریف سازگاری انجام می شود.

3.7. سازگاری زمان اجرا

پیاده سازی دستگاه:

  • [C-0-1] MUST support the full Dalvik Executable (DEX) format and Dalvik bytecode specification and semantics .

  • [C-0-2] MUST configure Dalvik runtimes to allocate memory in accordance with the upstream Android platform, and as specified by the following table. (See section 7.1.1 for screen size and screen density definitions.)

  • SHOULD use Android RunTime (ART), the reference upstream implementation of the Dalvik Executable Format, and the reference implementation's package management system.

  • SHOULD run fuzz tests under various modes of execution and target architectures to assure the stability of the runtime. Refer to JFuzz and DexFuzz in the Android Open Source Project website.

Note that memory values specified below are considered minimum values and device implementations MAY allocate more memory per application.

چیدمان صفحه نمایش تراکم صفحه نمایش حداقل حافظه برنامه
ساعت مچی اندرویدی 120 dpi (LDPI) 32 مگابایت
160 dpi (MDPI)
213 dpi (TVDPI)
240 dpi (HDPI) 36 مگابایت
280 dpi (280dpi)
320 dpi (XHDPI) 48 مگابایت
360 dpi (360dpi)
400 dpi (400dpi) 56 مگابایت
420 dpi (420dpi) 64 مگابایت
480 dpi (xxhdpi) 88 مگابایت
560 dpi (560DPI) 112 مگابایت
640 dpi (xxxhdpi) 154 مگابایت
کوچک/طبیعی 120 dpi (LDPI) 32 مگابایت
160 dpi (MDPI)
213 dpi (TVDPI) 48 مگابایت
240 dpi (HDPI)
280 dpi (280dpi)
320 dpi (XHDPI) 80 مگابایت
360 dpi (360dpi)
400 dpi (400dpi) 96 مگابایت
420 dpi (420dpi) 112 مگابایت
480 dpi (xxhdpi) 128 مگابایت
560 dpi (560DPI) 192mb
640 dpi (xxxhdpi) 256 مگابایت
بزرگ 120 dpi (LDPI) 32 مگابایت
160 dpi (MDPI) 48 مگابایت
213 dpi (TVDPI) 80 مگابایت
240 dpi (HDPI)
280 dpi (280dpi) 96 مگابایت
320 dpi (XHDPI) 128 مگابایت
360 dpi (360dpi) 160 مگابایت
400 dpi (400dpi) 192mb
420 dpi (420dpi) 228 مگابایت
480 dpi (xxhdpi) 256 مگابایت
560 dpi (560DPI) 384 مگابایت
640 dpi (xxxhdpi) 512 مگابایت
xlarge 120 dpi (LDPI) 48 مگابایت
160 dpi (MDPI) 80 مگابایت
213 dpi (TVDPI) 96 مگابایت
240 dpi (HDPI)
280 dpi (280dpi) 144 مگابایت
320 dpi (XHDPI) 192mb
360 dpi (360dpi) 240 مگابایت
400 dpi (400dpi) 288 مگابایت
420 dpi (420dpi) 336 مگابایت
480 dpi (xxhdpi) 384 مگابایت
560 dpi (560DPI) 576 مگابایت
640 dpi (xxxhdpi) 768 مگابایت

3.8. سازگاری با رابط کاربری

3.8.1. راه‌انداز (صفحه اصلی)

Android شامل یک برنامه پرتاب (صفحه اصلی) و پشتیبانی از برنامه های شخص ثالث برای جایگزینی پرتاب دستگاه (صفحه اصلی) است.

If device implementations allow third-party applications to replace the device home screen, they:

  • [C-1-1] MUST declare the platform feature android.software.home_screen .
  • [C-1-2] MUST return the AdaptiveIconDrawable object when the third-party application use <adaptive-icon> tag to provide their icon, and the PackageManager methods to retrieve icons are called.

If device implementations include a default launcher that supports in-app pinning of shortcuts, they:

Conversely, if device implementations do not support in-app pinning of shortcuts, they:

If device implementations implement a default launcher that provides quick access to the additional shortcuts provided by third-party apps through the ShortcutManager API, they:

  • [C-4-1] MUST support all documented shortcut features (eg static and dynamic shortcuts, pinning shortcuts) and fully implement the APIs of the ShortcutManager API class.

If device implementations include a default launcher app that shows badges for the app icons, they:

  • [C-5-1] MUST respect the NotificationChannel.setShowBadge() API method. In other words, show a visual affordance associated with the app icon if the value is set as true , and do not show any app icon badging scheme when all of the app's notification channels have set the value as false .
  • MAY override the app icon badges with their proprietary badging scheme when third-party applications indicate support of the proprietary badging scheme through the use of proprietary APIs, but SHOULD use the resources and values provided through the notification badges APIs described in the SDK , such as the Notification.Builder.setNumber() and the Notification.Builder.setBadgeIconType() API.

3.8.2. ابزارک ها

Android supports third-party app widgets by defining a component type and corresponding API and lifecycle that allows applications to expose an “AppWidget” to the end user.

If device implementations support third-party app widgets, they:

  • [C-1-1] MUST declare support for platform feature android.software.app_widgets .
  • [C-1-2] MUST include built-in support for AppWidgets and expose user interface affordances to add, configure, view, and remove AppWidgets directly within the Launcher.
  • [C-1-3] MUST be capable of rendering widgets that are 4 x 4 in the standard grid size. See the App Widget DesignGuidelines in the Android SDK documentation for details.
  • MAY support application widgets on the lock screen.

If device implementations support third-party app widgets and in-app pinning of shortcuts, they:

3.8.3. اطلاعیه

Android includes Notification and NotificationManager APIs that allow third-party app developers to notify users of notable events and attract users' attention using the hardware components (eg sound, vibration and light) and software features (eg notification shade, system bar) of the device .

3.8.3.1. Presentation of Notifications

If device implementations allow third-party apps to notify users of notable events , they:

  • [C-1-1] MUST support notifications that use hardware features, as described in the SDK documentation, and to the extent possible with the device implementation hardware. به عنوان مثال ، اگر اجرای دستگاه شامل ویبراتور باشد ، باید API های لرزش را به درستی پیاده سازی کند. اگر اجرای دستگاه فاقد سخت افزار باشد ، API های مربوطه باید به عنوان No-Ops اجرا شوند. این رفتار در بخش 7 بیشتر شرح داده شده است.
  • [C-1-2] MUST correctly render all resources (icons, animation files, etc.) provided for in the APIs, or in the Status/System Bar icon style guide , although they MAY provide an alternative user experience for notifications than that provided by the reference Android Open Source implementation.
  • [C-1-3] MUST honor and implement properly the behaviors described for the APIs to update, remove and group notifications.
  • [C-1-4] MUST provide the full behavior of the NotificationChannel API documented in the SDK.
  • [C-1-5] MUST provide a user affordance to block and modify a certain third-party app's notification per each channel and app package level.
  • [C-1-6] MUST also provide a user affordance to display deleted notification channels.
  • [C-1-7] MUST correctly render all resources (images, stickers, icons, etc.) provided through Notification.MessagingStyle alongside the notification text without additional user interaction. For example, MUST show all resources including icons provided through android.app.Person in a group conversation that is set through setGroupConversation .
  • [C-SR] Are STRONGLY RECOMMENDED to automatically surface a user affordance to block a certain third-party app's notification per each channel and app package level after the user dismisses that notification multiple times.
  • SHOULD support rich notifications.
  • SHOULD present some higher priority notifications as heads-up notifications.
  • SHOULD have a user affordance to snooze notifications.
  • MAY only manage the visibility and timing of when third-party apps can notify users of notable events to mitigate safety issues such as driver distraction.

If device implementations support rich notifications, they:

  • [C-2-1] MUST use the exact resources as provided through the Notification.Style API class and its subclasses for the presented resource elements.
  • SHOULD present each and every resource element (eg icon, title and summary text) defined in the Notification.Style API class and its subclasses.

If device implementations support heads-up notifications: they:

  • [C-3-1] MUST use the heads-up notification view and resources as described in the Notification.Builder API class when heads-up notifications are presented.
  • [C-3-2] MUST display the actions provided through Notification.Builder.addAction() together with the notification content without additional user interaction as described in the SDK .
3.8.3.2. Notification Listener Service

Android includes the NotificationListenerService APIs that allow apps (once explicitly enabled by the user) to receive a copy of all notifications as they are posted or updated.

If device implementations report the feature flag android.hardware.ram.normal , they:

  • [C-1-1] MUST correctly and promptly update notifications in their entirety to all such installed and user-enabled listener services, including any and all metadata attached to the Notification object.
  • [C-1-2] MUST respect the snoozeNotification() API call, and dismiss the notification and make a callback after the snooze duration that is set in the API call.

If device implementations have a user affordance to snooze notifications, they:

  • [C-2-1] MUST reflect the snoozed notification status properly through the standard APIs such as NotificationListenerService.getSnoozedNotifications() .
  • [C-2-2] MUST make this user affordance available to snooze notifications from each installed third-party app's, unless they are from persistent/foreground services.
3.8.3.3. DND (Do not Disturb)

If device implementations support the DND feature, they:

  • [C-1-1] MUST implement an activity that would respond to the intent ACTION_NOTIFICATION_POLICY_ACCESS_SETTINGS , which for implementations with UI_MODE_TYPE_NORMAL it MUST be an activity where the user can grant or deny the app access to DND policy configurations.
  • [C-1-2] MUST, for when the device implementation has provided a means for the user to grant or deny third-party apps to access the DND policy configuration, display Automatic DND rules created by applications alongside the user-created and pre-defined rules.
  • [C-1-3] MUST honor the suppressedVisualEffects values passed along the NotificationManager.Policy and if an app has set any of the SUPPRESSED_EFFECT_SCREEN_OFF or SUPPRESSED_EFFECT_SCREEN_ON flags, it SHOULD indicate to the user that the visual effects are suppressed in the DND settings menu.

Android شامل API است که به توسعه دهندگان اجازه می دهد تا جستجو را در برنامه های خود بگنجانند و داده های برنامه خود را در جستجوی سیستم جهانی قرار دهند. به طور کلی ، این عملکرد شامل یک رابط کاربری واحد و گسترده است که به کاربران امکان می دهد نمایش داده ها را وارد کنند ، پیشنهادات را به عنوان نوع کاربران نشان می دهد و نتایج را نمایش می دهد. API های Android به توسعه دهندگان اجازه می دهند از این رابط استفاده مجدد کنند تا در برنامه های خود جستجو کنند و به توسعه دهندگان اجازه دهند تا نتایج را به رابط کاربری جستجوی جهانی مشترک ارائه دهند.

  • پیاده سازی های دستگاه Android باید شامل جستجوی جهانی ، یک رابط کاربری جستجوی منفرد ، مشترک و در سطح سیستم باشد که قادر به پیشنهادات زمان واقعی در پاسخ به ورودی کاربر باشد.

If device implementations implement the global search interface, they:

  • [C-1-1] MUST implement the APIs that allow third-party applications to add suggestions to the search box when it is run in global search mode.

If no third-party applications are installed that make use of the global search:

  • The default behavior SHOULD be to display web search engine results and suggestions.

Android همچنین شامل API های ASSION است تا برنامه ها را انتخاب کنند تا اطلاعات مربوط به زمینه فعلی را با دستیار در دستگاه به اشتراک بگذارند.

If device implementations support the Assist action, they:

  • [C-2-1] MUST indicate clearly to the end user when the context is shared, by either:
    • Each time the assist app accesses the context, displaying a white light around the edges of the screen that meet or exceed the duration and brightness of the Android Open Source Project implementation.
    • For the preinstalled assist app, providing a user affordance less than two navigations away from the default voice input and assistant app settings menu , and only sharing the context when the assist app is explicitly invoked by the user through a hotword or assist navigation key input.
  • [C-2-2] The designated interaction to launch the assist app as described in section 7.2.3 MUST launch the user-selected assist app, in other words the app that implements VoiceInteractionService , or an activity handling the ACTION_ASSIST intent.

3.8.5. Alerts and Toasts

Applications can use the Toast API to display short non-modal strings to the end user that disappear after a brief period of time, and use the TYPE_APPLICATION_OVERLAY window type API to display alert windows as an overlay over other apps.

If device implementations include a screen or video output, they:

  • [C-1-1] MUST provide a user affordance to block an app from displaying alert windows that use the TYPE_APPLICATION_OVERLAY . The AOSP implementation meets this requirement by having controls in the notification shade.

  • [C-1-2] MUST honor the Toast API and display Toasts from applications to end users in some highly visible manner.

3.8.6. تم ها

Android "مضامین" را به عنوان مکانیسمی برای برنامه های کاربردی در کل یک فعالیت یا برنامه کاربردی ارائه می دهد.

Android includes a “Holo” and "Material" theme family as a set of defined styles for application developers to use if they want to match the Holo theme look and feel as defined by the Android SDK.

If device implementations include a screen or video output, they:

  • [C-1-1] MUST NOT alter any of the Holo theme attributes exposed to applications.
  • [C-1-2] MUST support the “Material” theme family and MUST NOT alter any of the Material theme attributes or their assets exposed to applications.

Android همچنین شامل یک خانواده تم "پیش فرض دستگاه" به عنوان مجموعه ای از سبک های تعریف شده برای توسعه دهندگان برنامه در صورت تمایل به مطابقت با ظاهر و احساس دستگاه دستگاه مطابق با مجری دستگاه است.

Android از یک موضوع متفاوت با میله های سیستم شفاف پشتیبانی می کند ، که به توسعه دهندگان برنامه اجازه می دهد تا با محتوای برنامه خود ، منطقه پشت وضعیت و نوار ناوبری را پر کنند. برای فعال کردن یک تجربه سازگار سازگار در این پیکربندی ، مهم است که سبک نماد نوار وضعیت در پیاده سازی های مختلف دستگاه حفظ شود.

If device implementations include a system status bar, they:

  • [C-2-1] MUST use white for system status icons (such as signal strength and battery level) and notifications issued by the system, unless the icon is indicating a problematic status or an app requests a light status bar using the SYSTEM_UI_FLAG_LIGHT_STATUS_BAR flag .
  • [C-2-2] Android device implementations MUST change the color of the system status icons to black (for details, refer to R.style ) when an app requests a light status bar.

3.8.7. تصاویر پس زمینه زنده

Android یک نوع مؤلفه و API و چرخه حیات مربوطه را تعریف می کند که به برنامه ها امکان می دهد یک یا چند "تصاویر پس زمینه زنده" را در معرض کاربر قرار دهند. تصاویر پس زمینه زنده انیمیشن ها ، الگوهای یا تصاویر مشابه با قابلیت ورودی محدود است که به عنوان یک تصویر زمینه ، در پشت برنامه های دیگر نمایش داده می شود.

اگر بتواند تمام تصاویر پس زمینه زنده را اجرا کند ، بدون محدودیت در عملکرد ، با نرخ فریم معقول و بدون تأثیر جانبی بر سایر برنامه ها ، سخت افزار قادر به اجرای تصاویر پس زمینه زنده در نظر گرفته شده است. اگر محدودیت در سخت افزار باعث ایجاد تصاویر پس زمینه و/یا برنامه های کاربردی برای خرابی ، نقص عملکرد ، مصرف بیش از حد CPU یا باتری شود ، یا با نرخ فریم غیرقابل قبول اجرا شود ، سخت افزار ناتوان از اجرای تصویر زمینه زنده محسوب می شود. به عنوان نمونه ، برخی از تصاویر پس زمینه زنده ممکن است از متن OpenGL 2.0 یا 3.x برای ارائه محتوای خود استفاده کنند. تصویر زمینه زنده به طور قابل اعتماد روی سخت افزاری که از چندین زمینه OpenGL پشتیبانی نمی کند ، اجرا نمی شود زیرا استفاده از تصویر زمینه زنده از یک زمینه OpenGL ممکن است با سایر برنامه های کاربردی که از یک زمینه OpenGL نیز استفاده می کنند ، مغایرت داشته باشد.

  • Device implementations capable of running live wallpapers reliably as described above SHOULD implement live wallpapers.

If device implementations implement live wallpapers, they:

  • [C-1-1] MUST report the platform feature flag android.software.live_wallpaper.

3.8.8. تغییر فعالیت

کد منبع آندروید بالادست شامل صفحه نمایش کلی ، یک رابط کاربری در سطح سیستم برای تعویض کار و نمایش فعالیت ها و وظایف اخیراً دسترسی با استفاده از تصویر تصویربرداری از وضعیت گرافیکی برنامه در لحظه آخرین کار کاربر از برنامه است.

Device implementations including the recents function navigation key as detailed in section 7.2.3 MAY alter the interface.

If device implementations including the recents function navigation key as detailed in section 7.2.3 alter the interface, they:

  • [C-1-1] MUST support at least up to 7 displayed activities.
  • حداقل باید عنوان 4 فعالیت را همزمان نشان دهد.
  • [C-1-2] MUST implement the screen pinning behavior and provide the user with a settings menu to toggle the feature.
  • باید رنگ ، نماد ، عنوان صفحه نمایش را در قصبها نشان دهد.
  • باید یک اختیاری را نشان دهد ("X") اما ممکن است این مسئله را به تأخیر بیندازد تا زمانی که کاربر با صفحه نمایش تعامل پیدا کند.
  • SHOULD implement a shortcut to switch easily to the previous activity.
  • باید عملکرد سریع سوئیچ را بین دو برنامه اخیراً مورد استفاده ایجاد کنید ، هنگامی که کلید عملکرد Recents دو بار به کار گرفته می شود.
  • در صورت پشتیبانی ، وقتی که کلید توابع Recents طولانی مدت فشار می یابد ، باید حالت چند پیچ ​​و تاب صفحه تقسیم شده را تحریک کند.
  • ممکن است قرائت های وابسته را به عنوان گروهی که با هم حرکت می کنند ، به نمایش بگذارد.
  • [SR] Are STRONGLY RECOMMENDED to use the upstream Android user interface (or a similar thumbnail-based interface) for the overview screen.

3.8.9. مدیریت ورودی

Android شامل پشتیبانی از مدیریت ورودی و پشتیبانی از ویرایشگرهای روش ورودی شخص ثالث است.

If device implementations allow users to use third-party input methods on the device, they:

  • [C-1-1] MUST declare the platform feature android.software.input_methods and support IME APIs as defined in the Android SDK documentation.
  • [C-1-2] MUST provide a user-accessible mechanism to add and configure third-party input methods in response to the android.settings.INPUT_METHOD_SETTINGS intent.

If device implementations declare the android.software.autofill feature flag, they:

3.8.10. کنترل رسانه قفل صفحه نمایش

API Client Control Control از Android 5.0 به نفع الگوی اعلان رسانه ای که به برنامه های رسانه ای اجازه می دهد تا با کنترل های پخش که در صفحه قفل نمایش داده می شوند ادغام شوند.

3.8.11. محافظ صفحه (قبلا Dreams)

Android شامل پشتیبانی از InteractiveScreensavers است که قبلاً به عنوان رویاها گفته می شد. پس اندازهای صفحه نمایش به کاربران این امکان را می دهند که وقتی دستگاه متصل به منبع تغذیه در یک حوضچه میز کار می کند ، با برنامه ها ارتباط برقرار کنند. Android Watch devices MAY implement screen savers, but other types of device implementations SHOULD include support for screen savers and provide a settings option for users to configure screen savers in response to the android.settings.DREAM_SETTINGS intent.

3.8.12. محل

If device implementations include a hardware sensor (eg GPS) that is capable of providing the location coordinates, they

3.8.13. یونیکد و فونت

Android includes support for the emoji characters defined in Unicode 10.0 .

If device implementations include a screen or video output, they:

  • [C-1-1] MUST be capable of rendering these emoji characters in color glyph.
  • [C-1-2] MUST include support for:
    • Roboto 2 font with different weights—sans-serif-thin, sans-serif-light, sans-serif-medium, sans-serif-black, sans-serif-condensed, sans-serif-condensed-light for the languages available on the دستگاه
    • Full Unicode 7.0 coverage of Latin, Greek, and Cyrillic, including the Latin Extended A, B, C, and D ranges, and all glyphs in the currency symbols block of Unicode 7.0.
  • SHOULD support the skin tone and diverse family emojis as specified in the Unicode Technical Report #51 .

If device implementations include an IME, they:

  • SHOULD provide an input method to the user for these emoji characters.

3.8.14. چند پنجره

If device implementations have the capability to display multiple activities at the same time, they:

  • [C-1-1] MUST implement such multi-window mode(s) in accordance with the application behaviors and APIs described in the Android SDK multi-window mode support documentation and meet the following requirements:
  • [C-1-2] Applications can indicate whether they are capable of operating in multi-window mode in the AndroidManifest.xml file, either explicitly via setting the android:resizeableActivity attribute to true or implicitly by having the targetSdkVersion > 24. Apps that explicitly set this attribute to false in their manifest MUST NOT be launched in multi-window mode. Older apps with targetSdkVersion < 24 that did not set this android:resizeableActivity attribute MAY be launched in multi-window mode, but the system MUST provide warning that the app may not work as expected in multi-window mode.
  • [C-1-3] MUST NOT offer split-screen or freeform mode if the screen height < 440 dp and the screen width < 440 dp.
  • پیاده سازی دستگاه با اندازه صفحه xlarge باید از حالت Freeform پشتیبانی کند.

If device implementations support multi-window mode(s), and the split screen mode, they:

  • [C-2-1] MUST preload a resizeable launcher as the default.
  • [C-2-2] MUST crop the docked activity of a split-screen multi-window but SHOULD show some content of it, if the Launcher app is the focused window.
  • [C-2-3] MUST honor the declared AndroidManifestLayout_minWidth and AndroidManifestLayout_minHeight values of the third-party launcher application and not override these values in the course of showing some content of the docked activity.

If device implementations support multi-window mode(s) and picture-in-picture multi-window mode, they:

  • [C-3-1] MUST launch activities in picture-in-picture multi-window mode when the app is: * Targeting API level 26 or higher and declares android:supportsPictureInPicture * Targeting API level 25 or lower and declares both android:resizeableActivity and android:supportsPictureInPicture .
  • [C-3-2] MUST expose the actions in their SystemUI as specified by the current PIP activity through the setActions() API.
  • [C-3-3] MUST support aspect ratios greater than or equal to 1:2.39 and less than or equal to 2.39:1, as specified by the PIP activity through the setAspectRatio() API.
  • [C-3-4] MUST use KeyEvent.KEYCODE_WINDOW to control the PIP window; if PIP mode is not implemented, the key MUST be available to the foreground activity.
  • [C-3-5] MUST provide a user affordance to block an app from displaying in PIP mode; the AOSP implementation meets this requirement by having controls in the notification shade.
  • [C-3-6] MUST allocate minimum width and height of 108 dp for the PIP window and minimum width of 240 dp and height of 135 dp for the PIP window when the Configuration.uiMode is configured as UI_MODE_TYPE_TELEVISION .

3.8.15. Display Cutout

Android supports a Display Cutout as described in the SDK document. The DisplayCutout API defines an area on the edge of the display that is not functional for displaying content.

If device implementations include display cutout(s), they:

  • [C-1-1] MUST only have cutout(s) on the short edge(s) of the device. Conversely, if the device's aspect ratio is 1.0(1:1), they MUST NOT have cutout(s).
  • [C-1-2] MUST NOT have more than one cutout per edge.
  • [C-1-3] MUST honor the display cutout flags set by the app through the WindowManager.LayoutParams API as described in the SDK.
  • [C-1-4] MUST report correct values for all cutout metrics defined in the DisplayCutout API.

3.9. مدیریت دستگاه

Android includes features that allow security-aware applications to perform device administration functions at the system level, such as enforcing password policies or performing remote wipe, through the Android Device Administration API .

If device implementations implement the full range of device administration policies defined in the Android SDK documentation, they:

  • [C-1-1] MUST declare android.software.device_admin .
  • [C-1-2] MUST support device owner provisioning as described in section 3.9.1 and section 3.9.1.1 .

3.9.1 تهیه دستگاه

3.9.1.1 تأمین مالک دستگاه

If device implementations declare android.software.device_admin , they:

  • [C-1-1] MUST support enrolling a Device Policy Client (DPC) as a Device Owner app as described below:
  • [C-1-2] MUST require some affirmative action during the provisioning process to consent to the app being set as Device Owner. Consent can be via user action or by some programmatic means during provisioning but it MUST NOT be hard coded or prevent the use of other Device Owner apps.

If device implementations declare android.software.device_admin , but also include a proprietary Device Owner management solution and provide a mechanism to promote an application configured in their solution as a "Device Owner equivalent" to the standard "Device Owner" as recognized by the standard Android DevicePolicyManager APIs, they:

  • [C-2-1] MUST have a process in place to verify that the specific app being promoted belongs to a legitimate enterprise device management solution and it has been already configured in the proprietary solution to have the rights equivalent as a "Device Owner" .
  • [C-2-2] MUST show the same AOSP Device Owner consent disclosure as the flow initiated by android.app.action.PROVISION_MANAGED_DEVICE prior to enrolling the DPC application as "Device Owner".
  • MAY have user data on the device prior to enrolling the DPC application as "Device Owner".
3.9.1.2 تهیه نمایه مدیریت شده

If device implementations declare android.software.managed_users , they:

  • [C-1-1] MUST implement the APIs allowing a Device Policy Controller (DPC) application to become the owner of a new Managed Profile .

  • [C-1-2] The managed profile provisioning process (the flow initiated by android.app.action.PROVISION_MANAGED_PROFILE ) users experience MUST align with the AOSP implementation.

  • [C-1-3] MUST provide the following user affordances within the Settings to indicate to the user when a particular system function has been disabled by the Device Policy Controller (DPC):

    • یک نماد سازگار یا سایر هزینه های کاربر (به عنوان مثال نماد اطلاعات بالادست AOSP) برای نمایش زمانی که یک تنظیم خاص توسط مدیر دستگاه محدود شده است.
    • یک پیام توضیح کوتاه ، همانطور که توسط مدیر دستگاه از طریق setShortSupportMessage ارائه شده است.
    • نماد برنامه DPC.

3.9.2 پشتیبانی از نمایه مدیریت شده

If device implementations declare android.software.managed_users , they:

  • [C-1-1] MUST support managed profiles via the android.app.admin.DevicePolicyManager APIs.
  • [C-1-2] MUST allow one and only one managed profile to be created .
  • [C-1-3] MUST use an icon badge (similar to the AOSP upstream work badge) to represent the managed applications and widgets and other badged UI elements like Recents & Notifications.
  • [C-1-4] MUST display a notification icon (similar to the AOSP upstream work badge) to indicate when user is within a managed profile application.
  • [C-1-5] MUST display a toast indicating that the user is in the managed profile if and when the device wakes up (ACTION_USER_PRESENT) and the foreground application is within the managed profile.
  • [C-1-6] Where a managed profile exists, MUST show a visual affordance in the Intent 'Chooser' to allow the user to forward the intent from the managed profile to the primary user or vice versa, if enabled by the Device Policy کنترل کننده.
  • [C-1-7] Where a managed profile exists, MUST expose the following user affordances for both the primary user and the managed profile:
    • حسابداری جداگانه برای باتری ، مکان ، داده های تلفن همراه و استفاده از ذخیره سازی برای کاربر اصلی و نمایه مدیریت شده.
    • مدیریت مستقل برنامه های VPN نصب شده در کاربر اصلی یا نمایه مدیریت شده.
    • مدیریت مستقل برنامه های نصب شده در کاربر اصلی یا نمایه مدیریت شده.
    • مدیریت مستقل حساب ها در کاربر اصلی یا نمایه مدیریت شده.
  • [C-1-8] MUST ensure the preinstalled dialer, contacts and messaging applications can search for and look up caller information from the managed profile (if one exists) alongside those from the primary profile, if the Device Policy Controller permits it.
  • [C-1-9] MUST ensure that it satisfies all the security requirements applicable for a device with multiple users enabled (see section 9.5 ), even though the managed profile is not counted as another user in addition to the primary user.
  • [C-1-10] MUST support the ability to specify a separate lock screen meeting the following requirements to grant access to apps running in a managed profile.
    • پیاده سازی های دستگاه باید از DevicePolicyManager.ACTION_SET_NEW_PASSWORD قصد داشته و یک رابط برای پیکربندی اعتبار صفحه قفل جداگانه برای نمایه مدیریت شده نشان دهد.
    • The lock screen credentials of the managed profile MUST use the same credential storage and management mechanisms as the parent profile, as documented on the Android Open Source Project Site .
    • خط مشی های رمز عبور DPC فقط باید در مورد اعتبار صفحه نمایش قفل نمایه مدیریت شده اعمال شود ، مگر اینکه به عنوان نمونه DevicePolicyManager که توسط GetParentProfileInstance برگشته است ، استفاده شود.
  • هنگامی که مخاطبین از نمایه مدیریت شده در گزارش تماس از پیش نصب شده ، UI در تماس ، در حال پیشرفت و اعلان های تماس تلفنی ، مخاطبین و برنامه های پیام رسانی که باید با همان نشان استفاده شده برای نشان دادن برنامه های پروفایل مدیریت شده نشان داده شوند ، نمایش داده می شود.

3.9.3 Managed User Support

If device implementations declare android.software.managed_users , they:

  • [C-1-1] MUST provide a user affordance to logout from the current user and switch back to the primary user in multiple-user session when isLogoutEnabled returns true . The user affordance MUST be accessible from the lockscreen without unlocking the device.

3.10. دسترسی

Android یک لایه دسترسی فراهم می کند که به کاربران دارای معلولیت کمک می کند تا راحت تر دستگاه های خود را حرکت دهند. علاوه بر این ، Android API های پلتفرم را فراهم می کند که اجرای خدمات دسترسی را برای دریافت پاسخ به تماس برای رویدادهای کاربر و سیستم امکان پذیر می کند و مکانیسم های بازخورد متناوب مانند متن به گفتار ، بازخورد هاپتیک و ناوبری Trackball/D-Pad را تولید می کند.

If device implementations support third-party accessibility services, they:

  • [C-1-1] MUST provide an implementation of the Android accessibility framework as described in the accessibility APIs SDK documentation.
  • [C-1-2] MUST generate accessibility events and deliver the appropriate AccessibilityEvent to all registered AccessibilityService implementations as documented in the SDK.
  • [C-1-3] MUST honor the android.settings.ACCESSIBILITY_SETTINGS intent to provide a user-accessible mechanism to enable and disable the third-party accessibility services alongside the preinstalled accessibility services.
  • [C-1-4] MUST add a button in the system's navigation bar allowing the user to control the accessibility service when the enabled accessibility services declare the AccessibilityServiceInfo.FLAG_REQUEST_ACCESSIBILITY_BUTTON . Note that for device implementations with no system navigation bar, this requirement is not applicable, but device implementations SHOULD provide a user affordance to control these accessibility services.

If device implementations include preinstalled accessibility services, they:

  • [C-2-1] MUST implement these preinstalled accessibility services as Direct Boot Aware apps when the data storage is encrypted with File Based Encryption (FBE).
  • SHOULD provide a mechanism in the out-of-box setup flow for users to enable relevant accessibility services, as well as options to adjust the font size, display size and magnification gestures.

3.11. متن به گفتار

Android شامل API هایی است که به برنامه های کاربردی اجازه می دهد از خدمات متن به گفتار (TTS) استفاده کنند و به ارائه دهندگان خدمات اجازه می دهد تا خدمات TTS را ارائه دهند.

If device implementations reporting the feature android.hardware.audio.output, they:

If device implementations support installation of third-party TTS engines, they:

  • [C-2-1] MUST provide user affordance to allow the user to select a TTS engine for use at system level.

3.12. چارچوب ورودی تلویزیون

The Android Television Input Framework (TIF) simplifies the delivery of live content to Android Television devices. TIF provides a standard API to create input modules that control Android Television devices.

If device implementations support TIF, they:

  • [C-1-1] MUST declare the platform feature android.software.live_tv .
  • [C-1-2] MUST support all TIF APIs such that an application which uses these APIs and the third-party TIF-based inputs service can be installed and used on the device.

3.13. تنظیمات سریع

Android provides a Quick Settings UI component that allows quick access to frequently used or urgently needed actions.

If device implementations include a Quick Settings UI component, they:

  • [C-1-1] MUST allow the user to add or remove the tiles provided through the quicksettings APIs from a third-party app.
  • [C-1-2] MUST NOT automatically add a tile from a third-party app directly to the Quick Settings.
  • [C-1-3] MUST display all the user-added tiles from third-party apps alongside the system-provided quick setting tiles.

3.14. Media UI

If device implementations include the UI framework that supports third-party apps that depend on MediaBrowser and MediaSession , they:

3.15. برنامه های فوری

Device implementations MUST satisfy the following requirements:

  • [C-0-1] Instant Apps MUST only be granted permissions that have the android:protectionLevel set to "instant" .
  • [C-0-2] Instant Apps MUST NOT interact with installed apps via implicit intents unless one of the following is true:
    • The component's intent pattern filter is exposed and has CATEGORY_BROWSABLE
    • The action is one of ACTION_SEND, ACTION_SENDTO, ACTION_SEND_MULTIPLE
    • The target is explicitly exposed with android:visibleToInstantApps
  • [C-0-3] Instant Apps MUST NOT interact explicitly with installed apps unless the component is exposed via android:visibleToInstantApps.
  • [C-0-4] IInstalled Apps MUST NOT see details about Instant Apps on the device unless the Instant App explicitly connects to the installed application.

3.16. Companion Device Pairing

Android includes support for companion device pairing to more effectively manage association with companion devices and provides the CompanionDeviceManager API for apps to access this feature.

If device implementations support the companion device pairing feature, they:

  • [C-1-1] MUST declare the feature flag FEATURE_COMPANION_DEVICE_SETUP .
  • [C-1-2] MUST ensure the APIs in the android.companion package is fully implemented.
  • [C-1-3] MUST provide user affordances for the user to select/confirm a companion device is present and operational.

3.17. Heavyweight Apps

If device implementations declare the feature FEATURE_CANT_SAVE_STATE , then they:

  • [C-1-1] MUST have only one installed app that specifies cantSaveState running in the system at a time. If the user leaves such an app without explicitly exiting it (for example by pressing home while leaving an active activity the system, instead of pressing back with no remaining active activities in the system), then device implementations MUST prioritize that app in RAM as they do for other things that are expected to remain running, such as foreground services. While such an app is in the background, the system can still apply power management features to it, such as limiting CPU and network access.
  • [C-1-2] MUST provide a UI affordance to chose the app that won't participate in the normal state save/restore mechanism once the user launches a second app declared with cantSaveState attribute.
  • [C-1-3] MUST NOT apply other changes in policy to apps that specify cantSaveState , such as changing CPU performance or changing scheduling prioritization.

If device implementations don't declare the feature FEATURE_CANT_SAVE_STATE , then they:

  • [C-1-1] MUST ignore the cantSaveState attribute set by apps and MUST NOT change the app behavior based on that attribute.

4. سازگاری بسته بندی برنامه

Devices implementations:

  • [C-0-1] MUST be capable of installing and running Android “.apk” files as generated by the “aapt” tool included in the official Android SDK .
  • As the above requirement may be challenging, device implementations are RECOMMENDED to use the AOSP reference implementation's package management system.

پیاده سازی دستگاه:

  • [C-0-2] MUST support verifying “.apk” files using the APK Signature Scheme v3 , APK Signature Scheme v2 and JAR signing .
  • [C-0-3] MUST NOT extend either the .apk , Android Manifest , Dalvik bytecode , or RenderScript bytecode formats in such a way that would prevent those files from installing and running correctly on other compatible devices.
  • [C-0-4] MUST NOT allow apps other than the current "installer of record" for the package to silently uninstall the app without any user confirmation, as documented in the SDK for the DELETE_PACKAGE permission. The only exceptions are the system package verifier app handling PACKAGE_NEEDS_VERIFICATION intent and the storage manager app handling ACTION_MANAGE_STORAGE intent.

  • [C-0-5] MUST have an activity that handles the android.settings.MANAGE_UNKNOWN_APP_SOURCES intent.

  • [C-0-6] MUST NOT install application packages from unknown sources, unless the app that requests the installation meets all the following requirements:

    • It MUST declare the REQUEST_INSTALL_PACKAGES permission or have the android:targetSdkVersion set at 24 or lower.
    • It MUST have been granted permission by the user to install apps from unknown sources.
  • SHOULD provide a user affordance to grant/revoke the permission to install apps from unknown sources per application, but MAY choose to implement this as a no-op and return RESULT_CANCELED for startActivityForResult() , if the device implementation does not want to allow users to have this choice. However, even in such cases, they SHOULD indicate to the user why there is no such choice presented.

  • [C-0-7] MUST display a warning dialog with the warning string that is provided through the system API PackageManager.setHarmfulAppWarning to the user before launching an activity in an application that has been marked by the same system API PackageManager.setHarmfulAppWarning as potentially زیان آور.

  • SHOULD provide a user affordance to choose to uninstall or launch an application on the warning dialog.

5. سازگاری چند رسانه ای

پیاده سازی دستگاه:

  • [C-0-1] MUST support the media formats, encoders, decoders, file types, and container formats defined in section 5.1 for each and every codec declared by MediaCodecList .
  • [C-0-2] MUST declare and report support of the encoders, decoders available to third-party applications via MediaCodecList .
  • [C-0-3] MUST be able to decode and make available to third-party apps all the formats it can encode. This includes all bitstreams that its encoders generate and the profiles reported in its CamcorderProfile .

پیاده سازی دستگاه:

  • SHOULD aim for minimum codec latency, in others words, they
    • SHOULD NOT consume and store input buffers and return input buffers only once processed.
    • SHOULD NOT hold onto decoded buffers for longer than as specified by the standard (eg SPS).
    • SHOULD NOT hold onto encoded buffers longer than required by the GOP structure.

All of the codecs listed in the section below are provided as software implementations in the preferred Android implementation from the Android Open Source Project.

Please note that neither Google nor the Open Handset Alliance make any representation that these codecs are free from third-party patents. Those intending to use this source code in hardware or software products are advised that implementations of this code, including in open source software or shareware, may require patent licenses from the relevant patent holders.

5.1. کدک های رسانه ای

5.1.1. رمزگذاری صدا

See more details in 5.1.3. Audio Codecs Details .

If device implementations declare android.hardware.microphone , they MUST support the following audio encoding:

  • [C-1-1] PCM/WAVE

5.1.2. Audio Decoding

See more details in 5.1.3. Audio Codecs Details .

If device implementations declare support for the android.hardware.audio.output feature, they must support decoding the following audio formats:

  • [C-1-1] MPEG-4 AAC Profile (AAC LC)
  • [C-1-2] MPEG-4 HE AAC Profile (AAC+)
  • [C-1-3] MPEG-4 HE AACv2 Profile (enhanced AAC+)
  • [C-1-4] AAC ELD (enhanced low delay AAC)
  • [C-1-11] xHE-AAC (ISO/IEC 23003-3 Extended HE AAC Profile, which includes the USAC Baseline Profile, and ISO/IEC 23003-4 Dynamic Range Control Profile)
  • [C-1-5] FLAC
  • [C-1-6] MP3
  • [C-1-7] MIDI
  • [C-1-8] Vorbis
  • [C-1-9] PCM/WAVE
  • [C-1-10] Opus

If device implementations support the decoding of AAC input buffers of multichannel streams (ie more than two channels) to PCM through the default AAC audio decoder in the android.media.MediaCodec API, the following MUST be supported:

  • [C-2-1] Decoding MUST be performed without downmixing (eg a 5.0 AAC stream must be decoded to five channels of PCM, a 5.1 AAC stream must be decoded to six channels of PCM).
  • [C-2-2] Dynamic range metadata MUST be as defined in "Dynamic Range Control (DRC)" in ISO/IEC 14496-3, and the android.media.MediaFormat DRC keys to configure the dynamic range-related behaviors of the audio decoder. The AAC DRC keys were introduced in API 21,and are: KEY_AAC_DRC_ATTENUATION_FACTOR , KEY_AAC_DRC_BOOST_FACTOR , KEY_AAC_DRC_HEAVY_COMPRESSION , KEY_AAC_DRC_TARGET_REFERENCE_LEVEL and KEY_AAC_ENCODED_TARGET_LEVEL .

When decoding USAC audio, MPEG-D (ISO/IEC 23003-4):

  • [C-3-1] Loudness and DRC metadata MUST be interpreted and applied according to MPEG-D DRC Dynamic Range Control Profile Level 1.
  • [C-3-2] The decoder MUST behave according to the configuration set with the following android.media.MediaFormat keys: KEY_AAC_DRC_TARGET_REFERENCE_LEVEL and KEY_AAC_DRC_EFFECT_TYPE .

MPEG-4 AAC, HE AAC, and HE AACv2 profile decoders:

  • MAY support loudness and dynamic range control using ISO/IEC 23003-4 Dynamic Range Control Profile.

If ISO/IEC 23003-4 is supported and if both ISO/IEC 23003-4 and ISO/IEC 14496-3 metadata are present in a decoded bitstream, then:

  • ISO/IEC 23003-4 metadata SHALL take precedence.

5.1.3. Audio Codecs Details

Format/Codec جزئیات Supported File Types/Container Formats
MPEG-4 AAC Profile
(AAC LC)
Support for mono/stereo/5.0/5.1 content with standard sampling rates from 8 to 48 kHz.
  • 3GPP (.3gp)
  • MPEG-4 (mp4, .m4a)
  • ADTS raw AAC (.aac, ADIF not supported)
  • MPEG-TS (.ts, not seekable)
MPEG-4 HE AAC Profile (AAC+) Support for mono/stereo/5.0/5.1 content with standard sampling rates from 16 to 48 kHz.
MPEG-4 HE AACv2
Profile (enhanced AAC+)
Support for mono/stereo/5.0/5.1 content with standard sampling rates from 16 to 48 kHz.
AAC ELD (enhanced low delay AAC) Support for mono/stereo content with standard sampling rates from 16 to 48 kHz.
USAC Support for mono/stereo content with standard sampling rates from 7.35 to 48 kHz. MPEG-4 (mp4, .m4a)
AMR-NB 4.75 to 12.2 kbps sampled @ 8 kHz 3GPP (.3gp)
AMR-WB 9 rates from 6.60 kbit/s to 23.85 kbit/s sampled @ 16 kHz
FLAC Mono/Stereo (no multichannel). Sample rates up to 48 kHz (but up to 44.1 kHz is RECOMMENDED on devices with 44.1 kHz output, as the 48 to 44.1 kHz downsampler does not include a low-pass filter). 16-bit RECOMMENDED; no dither applied for 24-bit. FLAC (.flac) only
MP3 Mono/Stereo 8-320Kbps constant (CBR) or variable bitrate (VBR) MP3 (.mp3)
MIDI MIDI Type 0 and 1. DLS Version 1 and 2. XMF and Mobile XMF. Support for ringtone formats RTTTL/RTX, OTA, and iMelody
  • Type 0 and 1 (.mid, .xmf, .mxmf)
  • RTTTL/RTX (.rtttl, .rtx)
  • OTA (.ota)
  • iMelody (.imy)
Vorbis
  • Ogg (.ogg)
  • Matroska (.mkv, Android 4.0+)
PCM/WAVE 16-bit linear PCM (rates up to limit of hardware). Devices MUST support sampling rates for raw PCM recording at 8000, 11025, 16000, and 44100 Hz frequencies. WAVE (.wav)
اپوس Matroska (.mkv), Ogg(.ogg)

5.1.4. Image Encoding

See more details in 5.1.6. Image Codecs Details .

Device implementations MUST support encoding the following image encoding:

  • [C-0-1] JPEG
  • [C-0-2] PNG
  • [C-0-3] WebP

5.1.5. Image Decoding

See more details in 5.1.6. Image Codecs Details .

Device implementations MUST support decoding the following image encoding:

  • [C-0-1] JPEG
  • [C-0-2] GIF
  • [C-0-3] PNG
  • [C-0-4] BMP
  • [C-0-5] WebP
  • [C-0-6] Raw
  • [C-0-7] HEIF (HEIC)

5.1.6. Image Codecs Details

Format/Codec جزئیات Supported File Types/Container Formats
JPEG Base+progressive JPEG (.jpg)
GIF GIF (.gif)
PNG PNG (.png)
BMP BMP (.bmp)
وب پی WebP (.webp)
خام ARW (.arw), CR2 (.cr2), DNG (.dng), NEF (.nef), NRW (.nrw), ORF (.orf), PEF (.pef), RAF (.raf), RW2 (.rw2), SRW (.srw)
HEIF Image, Image collection, Image sequence HEIF (.heif), HEIC (.heic)

5.1.7. کدک های ویدیویی

  • For acceptable quality of web video streaming and video-conference services, device implementations SHOULD use a hardware VP8 codec that meets the requirements .

If device implementations include a video decoder or encoder:

  • [C-1-1] Video codecs MUST support output and input bytebuffer sizes that accommodate the largest feasible compressed and uncompressed frame as dictated by the standard and configuration but also not overallocate.

  • [C-1-2] Video encoders and decoders MUST support YUV420 flexible color format (COLOR_FormatYUV420Flexible).

If device implementations advertise HDR profile support through Display.HdrCapabilities , they:

  • [C-2-1] MUST support HDR static metadata parsing and handling.

If device implementations advertise intra refresh support through FEATURE_IntraRefresh in the MediaCodecInfo.CodecCapabilities class, they:

  • [C-3-1] MUST support the refresh periods in the range of 10 - 60 frames and accurately operate within 20% of configured refresh period.

5.1.8. Video Codecs List

Format/Codec جزئیات Supported File Types/
Container Formats
H.263
  • 3GPP (.3gp)
  • MPEG-4 (.mp4)
H.264 AVC See section 5.2 and 5.3 for details
  • 3GPP (.3gp)
  • MPEG-4 (.mp4)
  • MPEG-2 TS (.ts, AAC audio only, not seekable, Android 3.0+)
H.265 HEVC See section 5.3 for details MPEG-4 (.mp4)
MPEG-2 Main Profile MPEG2-TS
MPEG-4 SP 3GPP (.3gp)
VP8 See section 5.2 and 5.3 for details
VP9 See section 5.3 for details

5.2. رمزگذاری ویدیو

If device implementations support any video encoder and make it available to third-party apps, they:

  • SHOULD NOT be, over two sliding windows, more than ~15% over the bitrate between intraframe (I-frame) intervals.
  • SHOULD NOT be more than ~100% over the bitrate over a sliding window of 1 second.

If device implementations include an embedded screen display with the diagonal length of at least 2.5 inches or include a video output port or declare the support of a camera via the android.hardware.camera.any feature flag, they:

  • [C-1-1] MUST include the support of at least one of the VP8 or H.264 video encoders, and make it available for third-party applications.
  • SHOULD support both VP8 and H.264 video encoders, and make it available for third-party applications.

If device implementations support any of the H.264, VP8, VP9 or HEVC video encoders and make it available to third-party applications, they:

  • [C-2-1] MUST support dynamically configurable bitrates.
  • SHOULD support variable frame rates, where video encoder SHOULD determine instantaneous frame duration based on the timestamps of input buffers, and allocate its bit bucket based on that frame duration.

If device implementations support the MPEG-4 SP video encoder and make it available to third-party apps, they:

  • SHOULD support dynamically configurable bitrates for the supported encoder.

5.2.1. H.263

If device implementations support H.263 encoders and make it available to third-party apps, they:

  • [C-1-1] MUST support Baseline Profile Level 45.
  • SHOULD support dynamically configurable bitrates for the supported encoder.

5.2.2. H-264

If device implementations support H.264 codec, they:

  • [C-1-1] MUST support Baseline Profile Level 3. However, support for ASO (Arbitrary Slice Ordering), FMO (Flexible Macroblock Ordering) and RS (Redundant Slices) is OPTIONAL. Moreover, to maintain compatibility with other Android devices, it is RECOMMENDED that ASO, FMO and RS are not used for Baseline Profile by encoders.
  • [C-1-2] MUST support the SD (Standard Definition) video encoding profiles in the following table.
  • SHOULD support Main Profile Level 4.
  • SHOULD support the HD (High Definition) video encoding profiles as indicated in the following table.

If device implementations report support of H.264 encoding for 720p or 1080p resolution videos through the media APIs, they:

  • [C-2-1] MUST support the encoding profiles in the following table.
SD (Low quality) SD (High quality) HD 720p HD 1080p
کیفیت ویدیو 320 x 240 px 720 x 480 px 1280 x 720 پیکسل 1920 x 1080 پیکسل
نرخ فریم ویدیو 20 fps 30 فریم بر ثانیه 30 فریم بر ثانیه 30 فریم بر ثانیه
Video bitrate 384 Kbps 2 مگابیت بر ثانیه 4 Mbps 10 مگابیت بر ثانیه

5.2.3. VP8

If device implementations support VP8 codec, they:

  • [C-1-1] MUST support the SD video encoding profiles.
  • SHOULD support the following HD (High Definition) video encoding profiles.
  • SHOULD support writing Matroska WebM files.
  • SHOULD use a hardware VP8 codec that meets the WebM project RTC hardware coding requirements , to ensure acceptable quality of web video streaming and video-conference services.

If device implementations report support of VP8 encoding for 720p or 1080p resolution videos through the media APIs, they:

  • [C-2-1] MUST support the encoding profiles in the following table.
SD (Low quality) SD (High quality) HD 720p HD 1080p
کیفیت ویدیو 320 x 180 px 640 x 360 px 1280 x 720 پیکسل 1920 x 1080 پیکسل
نرخ فریم ویدیو 30 فریم بر ثانیه 30 فریم بر ثانیه 30 فریم بر ثانیه 30 فریم بر ثانیه
Video bitrate 800 Kbps 2 مگابیت بر ثانیه 4 Mbps 10 مگابیت بر ثانیه

5.2.4. VP9

If device implementations support VP9 codec, they:

  • SHOULD support writing Matroska WebM files.

5.3. رمزگشایی ویدیو

If device implementations support VP8, VP9, H.264, or H.265 codecs, they:

  • [C-1-1] MUST support dynamic video resolution and frame rate switching through the standard Android APIs within the same stream for all VP8, VP9, H.264, and H.265 codecs in real time and up to the maximum resolution supported by each codec on the device.

If device implementations declare support for the Dolby Vision decoder through HDR_TYPE_DOLBY_VISION , they:

  • [C-2-1] MUST provide a Dolby Vision-capable extractor.
  • [C-2-2] MUST properly display Dolby Vision content on the device screen or on a standard video output port (eg, HDMI).
  • [C-2-3] MUST set the track index of backward-compatible base-layer(s) (if present) to be the same as the combined Dolby Vision layer's track index.

5.3.1. MPEG-2

If device implementations support MPEG-2 decoders, they:

  • [C-1-1] MUST support the Main Profile High Level.

5.3.2. H.263

If device implementations support H.263 decoders, they:

  • [C-1-1] MUST support Baseline Profile Level 30 and Level 45.

5.3.3. MPEG-4

If device implementations with MPEG-4 decoders, they:

  • [C-1-1] MUST support Simple Profile Level 3.

5.3.4. H.264

If device implementations support H.264 decoders, they:

  • [C-1-1] MUST support Main Profile Level 3.1 and Baseline Profile. Support for ASO (Arbitrary Slice Ordering), FMO (Flexible Macroblock Ordering) and RS (Redundant Slices) is OPTIONAL.
  • [C-1-2] MUST be capable of decoding videos with the SD (Standard Definition) profiles listed in the following table and encoded with the Baseline Profile and Main Profile Level 3.1 (including 720p30).
  • SHOULD be capable of decoding videos with the HD (High Definition) profiles as indicated in the following table.

If the height that is reported by the Display.getSupportedModes() method is equal or greater than the video resolution, device implementations:

  • [C-2-1] MUST support the HD 720p video decoding profiles in the following table.
  • [C-2-2] MUST support the HD 1080p video decoding profiles in the following table.
SD (Low quality) SD (High quality) HD 720p HD 1080p
کیفیت ویدیو 320 x 240 px 720 x 480 px 1280 x 720 پیکسل 1920 x 1080 پیکسل
نرخ فریم ویدیو 30 فریم بر ثانیه 30 فریم بر ثانیه 60 فریم بر ثانیه 30 fps (60 fps Television )
Video bitrate 800 Kbps 2 مگابیت بر ثانیه 8 Mbps 20 مگابیت بر ثانیه

5.3.5. H.265 (HEVC)

If device implementations support H.265 codec, they:

  • [C-1-1] MUST support the Main Profile Level 3 Main tier and the SD video decoding profiles as indicated in the following table.
  • SHOULD support the HD decoding profiles as indicated in the following table.
  • [C-1-2] MUST support the HD decoding profiles as indicated in the following table if there is a hardware decoder.

If the height that is reported by the Display.getSupportedModes() method is equal to or greater than the video resolution, then:

  • [C-2-1] Device implementations MUST support at least one of H.265 or VP9 decoding of 720, 1080 and UHD profiles.
SD (Low quality) SD (High quality) HD 720p HD 1080p UHD
کیفیت ویدیو 352 x 288 px 720 x 480 px 1280 x 720 پیکسل 1920 x 1080 پیکسل 3840 x 2160 پیکسل
نرخ فریم ویدیو 30 فریم بر ثانیه 30 فریم بر ثانیه 30 فریم بر ثانیه 30/60 fps (60 fps Television with H.265 hardware decoding ) 60 فریم بر ثانیه
Video bitrate 600 Kbps 1.6 Mbps 4 Mbps 5 Mbps 20 مگابیت بر ثانیه

5.3.6. VP8

If device implementations support VP8 codec, they:

  • [C-1-1] MUST support the SD decoding profiles in the following table.
  • SHOULD use a hardware VP8 codec that meets the requirements .
  • SHOULD support the HD decoding profiles in the following table.

If the height as reported by the Display.getSupportedModes() method is equal or greater than the video resolution, then:

  • [C-2-1] Device implementations MUST support 720p profiles in the following table.
  • [C-2-2] Device implementations MUST support 1080p profiles in the following table.
SD (Low quality) SD (High quality) HD 720p HD 1080p
کیفیت ویدیو 320 x 180 px 640 x 360 px 1280 x 720 پیکسل 1920 x 1080 پیکسل
نرخ فریم ویدیو 30 فریم بر ثانیه 30 فریم بر ثانیه 30 fps (60 fps Television ) 30 (60 fps Television )
Video bitrate 800 Kbps 2 مگابیت بر ثانیه 8 Mbps 20 مگابیت بر ثانیه

5.3.7. VP9

If device implementations support VP9 codec, they:

  • [C-1-1] MUST support the SD video decoding profiles as indicated in the following table.
  • SHOULD support the HD decoding profiles as indicated in the following table.

If device implementations support VP9 codec and a hardware decoder:

  • [C-2-1] MUST support the HD decoding profiles as indicated in the following table.

If the height that is reported by the Display.getSupportedModes() method is equal to or greater than the video resolution, then:

  • [C-3-1] Device implementations MUST support at least one of VP9 or H.265 decoding of the 720, 1080 and UHD profiles.
SD (Low quality) SD (High quality) HD 720p HD 1080p UHD
کیفیت ویدیو 320 x 180 px 640 x 360 px 1280 x 720 پیکسل 1920 x 1080 پیکسل 3840 x 2160 پیکسل
نرخ فریم ویدیو 30 فریم بر ثانیه 30 فریم بر ثانیه 30 فریم بر ثانیه 30 fps (60 fps Television with VP9 hardware decoding ) 60 فریم بر ثانیه
Video bitrate 600 Kbps 1.6 Mbps 4 Mbps 5 Mbps 20 مگابیت بر ثانیه

5.4. ضبط صدا

While some of the requirements outlined in this section are listed as SHOULD since Android 4.3, the Compatibility Definition for future versions are planned to change these to MUST. Existing and new Android devices are STRONGLY RECOMMENDED to meet these requirements that are listed as SHOULD, or they will not be able to attain Android compatibility when upgraded to the future version.

5.4.1. ضبط صدا خام

If device implementations declare android.hardware.microphone , they:

  • [C-1-1] MUST allow capture of raw audio content with the following characteristics:

    • Format : Linear PCM, 16-bit
    • Sampling rates : 8000, 11025, 16000, 44100 Hz
    • Channels : Mono
  • [C-1-2] MUST capture at above sample rates without up-sampling.

  • [C-1-3] MUST include an appropriate anti-aliasing filter when the sample rates given above are captured with down-sampling.
  • SHOULD allow AM radio and DVD quality capture of raw audio content, which means the following characteristics:

    • Format : Linear PCM, 16-bit
    • Sampling rates : 22050, 48000 Hz
    • Channels : Stereo

If device implementations allow AM radio and DVD quality capture of raw audio content, they:

  • [C-2-1] MUST capture without up-sampling at any ratio higher than 16000:22050 or 44100:48000.
  • [C-2-2] MUST include an appropriate anti-aliasing filter for any up-sampling or down-sampling.

5.4.2. ضبط برای تشخیص صدا

If device implementations declare android.hardware.microphone , they:

  • [C-1-1] MUST capture android.media.MediaRecorder.AudioSource.VOICE_RECOGNITION audio source at one of the sampling rates, 44100 and 48000.
  • [C-1-2] MUST, by default, disable any noise reduction audio processing when recording an audio stream from the AudioSource.VOICE_RECOGNITION audio source.
  • [C-1-3] MUST, by default, disable any automatic gain control when recording an audio stream from the AudioSource.VOICE_RECOGNITION audio source.
  • SHOULD record the voice recognition audio stream with approximately flat amplitude versus frequency characteristics: specifically, ±3 dB, from 100 Hz to 4000 Hz.
  • SHOULD record the voice recognition audio stream with input sensitivity set such that a 90 dB sound power level (SPL) source at 1000 Hz yields RMS of 2500 for 16-bit samples.
  • SHOULD record the voice recognition audio stream so that the PCM amplitude levels linearly track input SPL changes over at least a 30 dB range from -18 dB to +12 dB re 90 dB SPL at the microphone.
  • SHOULD record the voice recognition audio stream with total harmonic distortion (THD) less than 1% for 1 kHz at 90 dB SPL input level at the microphone.

If device implementations declare android.hardware.microphone and noise suppression (reduction) technologies tuned for speech recognition, they:

  • [C-2-1] MUST allow this audio affect to be controllable with the android.media.audiofx.NoiseSuppressor API.
  • [C-2-2] MUST uniquely identify each noise suppression technology implementation via the AudioEffect.Descriptor.uuid field.

5.4.3. ضبط برای تغییر مسیر پخش

The android.media.MediaRecorder.AudioSource class includes the REMOTE_SUBMIX audio source.

If device implementations declare both android.hardware.audio.output and android.hardware.microphone , they:

  • [C-1-1] MUST properly implement the REMOTE_SUBMIX audio source so that when an application uses the android.media.AudioRecord API to record from this audio source, it captures a mix of all audio streams except for the following:

    • AudioManager.STREAM_RING
    • AudioManager.STREAM_ALARM
    • AudioManager.STREAM_NOTIFICATION

5.5. پخش صدا

Android includes the support to allow apps to playback audio through the audio output peripheral as defined in section 7.8.2.

5.5.1. پخش صوت خام

If device implementations declare android.hardware.audio.output , they:

  • [C-1-1] MUST allow playback of raw audio content with the following characteristics:

    • Format : Linear PCM, 16-bit, 8-bit, float
    • Channels : Mono, Stereo, valid multichannel configurations with up to 8 channels
    • Sampling rates (in Hz) :
      • 8000, 11025, 16000, 22050, 32000, 44100, 48000 at the channel configurations listed above
      • 96000 in mono and stereo
  • SHOULD allow playback of raw audio content with the following characteristics:

    • Sampling rates : 24000, 48000

5.5.2. جلوه های صوتی

Android provides an API for audio effects for device implementations.

If device implementations declare the feature android.hardware.audio.output , they:

  • [C-1-1] MUST support the EFFECT_TYPE_EQUALIZER and EFFECT_TYPE_LOUDNESS_ENHANCER implementations controllable through the AudioEffect subclasses Equalizer , LoudnessEnhancer .
  • [C-1-2] MUST support the visualizer API implementation, controllable through the Visualizer class.
  • [C-1-3] MUST support the EFFECT_TYPE_DYNAMICS_PROCESSING implementation controllable through the AudioEffect subclass DynamicsProcessing .
  • SHOULD support the EFFECT_TYPE_BASS_BOOST , EFFECT_TYPE_ENV_REVERB , EFFECT_TYPE_PRESET_REVERB , and EFFECT_TYPE_VIRTUALIZER implementations controllable through the AudioEffect sub-classes BassBoost , EnvironmentalReverb , PresetReverb , and Virtualizer .

5.5.3. صدای خروجی صدا

Automotive device implementations:

  • SHOULD allow adjusting audio volume separately per each audio stream using the content type or usage as defined by AudioAttributes and car audio usage as publicly defined in android.car.CarAudioManager .

5.6. تأخیر صوتی

Audio latency is the time delay as an audio signal passes through a system. Many classes of applications rely on short latencies, to achieve real-time sound effects.

For the purposes of this section, use the following definitions:

  • output latency . The interval between when an application writes a frame of PCM-coded data and when the corresponding sound is presented to environment at an on-device transducer or signal leaves the device via a port and can be observed externally.
  • cold output latency . The output latency for the first frame, when the audio output system has been idle and powered down prior to the request.
  • continuous output latency . The output latency for subsequent frames, after the device is playing audio.
  • input latency . The interval between when a sound is presented by environment to device at an on-device transducer or signal enters the device via a port and when an application reads the corresponding frame of PCM-coded data.
  • lost input . The initial portion of an input signal that is unusable or unavailable.
  • cold input latency . The sum of lost input time and the input latency for the first frame, when the audio input system has been idle and powered down prior to the request.
  • continuous input latency . The input latency for subsequent frames, while the device is capturing audio.
  • cold output jitter . The variability among separate measurements of cold output latency values.
  • cold input jitter . The variability among separate measurements of cold input latency values.
  • continuous round-trip latency . The sum of continuous input latency plus continuous output latency plus one buffer period. The buffer period allows time for the app to process the signal and time for the app to mitigate phase difference between input and output streams.
  • OpenSL ES PCM buffer queue API . The set of PCM-related OpenSL ES APIs within Android NDK .
  • AAudio native audio API . The set of AAudio APIs within Android NDK .
  • Timestamp . A pair consisting of a relative frame position within a stream and the estimated time when that frame enters or leaves the audio processing pipeline on the associated endpoint. See also AudioTimestamp .

If device implementations declare android.hardware.audio.output they are STRONGLY RECOMMENDED to meet or exceed the following requirements:

  • [C-SR] Cold output latency of 100 milliseconds or less
  • [C-SR] Continuous output latency of 45 milliseconds or less
  • [C-SR] Minimize the cold output jitter
  • [C-SR] The output timestamp returned by AudioTrack.getTimestamp and AAudioStream_getTimestamp is accurate to +/- 1 ms.

If device implementations meet the above requirements, after any initial calibration, when using both the OpenSL ES PCM buffer queue and AAudio native audio APIs, for continuous output latency and cold output latency over at least one supported audio output device, they are:

If device implementations do not meet the requirements for low-latency audio via both the OpenSL ES PCM buffer queue and AAudio native audio APIs, they:

  • [C-1-1] MUST NOT report support for low-latency audio.

If device implementations include android.hardware.microphone , they are STRONGLY RECOMMENDED to meet these input audio requirements:

  • [C-SR] Cold input latency of 100 milliseconds or less.
  • [C-SR] Continuous input latency of 30 milliseconds or less.
  • [C-SR] Continuous round-trip latency of 50 milliseconds or less.
  • [C-SR] Minimize the cold input jitter.
  • [C-SR] Limit the error in input timestamps, as returned by AudioRecord.getTimestamp or AAudioStream_getTimestamp , to +/- 1 ms.

5.7. پروتکل های شبکه

Device implementations MUST support the media network protocols for audio and video playback as specified in the Android SDK documentation.

If device implementations include an audio or a video decoder, they:

  • [C-1-1] MUST support all required codecs and container formats in section 5.1 over HTTP(S).

  • [C-1-2] MUST support the media segment formats shown in the Media Segment Formats table below over HTTP Live Streaming draft protocol, Version 7 .

  • [C-1-3] MUST support the following RTP audio video profile and related codecs in the RTSP table below. For exceptions please see the table footnotes in section 5.1 .

Media Segment Formats

Segment formats منابع) Required codec support
MPEG-2 Transport Stream ISO 13818 Video codecs:
  • H264 AVC
  • MPEG-4 SP
  • MPEG-2
See section 5.1.3 for details on H264 AVC, MPEG2-4 SP,
and MPEG-2.

Audio codecs:

  • AAC
See section 5.1.1 for details on AAC and its variants.
AAC with ADTS framing and ID3 tags ISO 13818-7 See section 5.1.1 for details on AAC and its variants
WebVTT WebVTT

RTSP (RTP, SDP)

نام پروفایل منابع) Required codec support
H264 AVC RFC 6184 See section 5.1.3 for details on H264 AVC
MP4A-LATM RFC 6416 See section 5.1.1 for details on AAC and its variants
H263-1998 RFC 3551
RFC 4629
RFC 2190
See section 5.1.3 for details on H263
H263-2000 RFC 4629 See section 5.1.3 for details on H263
AMR RFC 4867 See section 5.1.1 for details on AMR-NB
AMR-WB RFC 4867 See section 5.1.1 for details on AMR-WB
MP4V-ES RFC 6416 See section 5.1.3 for details on MPEG-4 SP
mpeg4-generic RFC 3640 See section 5.1.1 for details on AAC and its variants
MP2T RFC 2250 See MPEG-2 Transport Stream underneath HTTP Live Streaming for details

5.8. رسانه ایمن

If device implementations support secure video output and are capable of supporting secure surfaces, they:

  • [C-1-1] MUST declare support for Display.FLAG_SECURE .

If device implementations declare support for Display.FLAG_SECURE and support wireless display protocol, they:

  • [C-2-1] MUST secure the link with a cryptographically strong mechanism such as HDCP 2.x or higher for the displays connected through wireless protocols such as Miracast.

If device implementations declare support for Display.FLAG_SECURE and support wired external display, they:

  • [C-3-1] MUST support HDCP 1.2 or higher for all external displays connected via a user-accessible wired port.

5.9. رابط دیجیتال ابزار موسیقی (MIDI)

If device implementations report support for feature android.software.midi via the android.content.pm.PackageManager class, they:

  • [C-1-1] MUST support MIDI over all MIDI-capable hardware transports for which they provide generic non-MIDI connectivity, where such transports are:

  • [C-1-2] MUST support the inter-app MIDI software transport (virtual MIDI devices)

5.10. صوتی حرفه ای

If device implementations report support for feature android.hardware.audio.pro via the android.content.pm.PackageManager class, they:

  • [C-1-1] MUST report support for feature android.hardware.audio.low_latency .
  • [C-1-2] MUST have the continuous round-trip audio latency, as defined in section 5.6 Audio Latency , MUST be 20 milliseconds or less and SHOULD be 10 milliseconds or less over at least one supported path.
  • [C-1-3] MUST include a USB port(s) supporting USB host mode and USB peripheral mode.
  • [C-1-4] MUST report support for feature android.software.midi .
  • [C-1-5] MUST meet latencies and USB audio requirements using both the OpenSL ES PCM buffer queue and AAudio native audio APIs.
  • [SR] Are STRONGLY RECOMMENDED to provide a consistent level of CPU performance while audio is active and CPU load is varying. This should be tested using SimpleSynth commit 1bd6391 . The SimpleSynth app needs to be run with below parameters and achieve zero underruns after 10 minutes:
    • Work cycles: 200,000
    • Variable load: ON (this will switch between 100% and 10% of the work cycles value every 2 seconds and is designed to test CPU governor behavior)
    • Stabilized load: OFF
  • SHOULD minimize audio clock inaccuracy and drift relative to standard time.
  • SHOULD minimize audio clock drift relative to the CPU CLOCK_MONOTONIC when both are active.
  • SHOULD minimize audio latency over on-device transducers.
  • SHOULD minimize audio latency over USB digital audio.
  • SHOULD document audio latency measurements over all paths.
  • SHOULD minimize jitter in audio buffer completion callback entry times, as this affects usable percentage of full CPU bandwidth by the callback.
  • SHOULD provide zero audio underruns (output) or overruns (input) under normal use at reported latency.
  • SHOULD provide zero inter-channel latency difference.
  • SHOULD minimize MIDI mean latency over all transports.
  • SHOULD minimize MIDI latency variability under load (jitter) over all transports.
  • SHOULD provide accurate MIDI timestamps over all transports.
  • SHOULD minimize audio signal noise over on-device transducers, including the period immediately after cold start.
  • SHOULD provide zero audio clock difference between the input and output sides of corresponding end-points, when both are active. Examples of corresponding end-points include the on-device microphone and speaker, or the audio jack input and output.
  • SHOULD handle audio buffer completion callbacks for the input and output sides of corresponding end-points on the same thread when both are active, and enter the output callback immediately after the return from the input callback. Or if it is not feasible to handle the callbacks on the same thread, then enter the output callback shortly after entering the input callback to permit the application to have a consistent timing of the input and output sides.
  • SHOULD minimize the phase difference between HAL audio buffering for the input and output sides of corresponding end-points.
  • SHOULD minimize touch latency.
  • SHOULD minimize touch latency variability under load (jitter).
  • SHOULD have a latency from touch input to audio output of less than or equal to 40 ms.

If device implementations meet all of the above requirements, they:

If device implementations include a 4 conductor 3.5mm audio jack, they:

If device implementations omit a 4 conductor 3.5mm audio jack and include a USB port(s) supporting USB host mode, they:

  • [C-3-1] MUST implement the USB audio class.
  • [C-3-2] MUST have a continuous round-trip audio latency of 20 milliseconds or less over the USB host mode port using USB audio class.
  • The continuous round-trip audio latency SHOULD be 10 milliseconds or less over the USB host mode port using USB audio class.

If device implementations include an HDMI port, they:

  • [C-4-1] MUST support output in stereo and eight channels at 20-bit or 24-bit depth and 192 kHz without bit-depth loss or resampling, in at least one configuration.

5.11. ضبط برای پردازش نشده

Android includes support for recording of unprocessed audio via the android.media.MediaRecorder.AudioSource.UNPROCESSED audio source. In OpenSL ES, it can be accessed with the record preset SL_ANDROID_RECORDING_PRESET_UNPROCESSED .

If device implementations intent to support unprocessed audio source and make it available to third-party apps, they:

  • [C-1-1] MUST report the support through the android.media.AudioManager property PROPERTY_SUPPORT_AUDIO_SOURCE_UNPROCESSED .

  • [C-1-2] MUST exhibit approximately flat amplitude-versus-frequency characteristics in the mid-frequency range: specifically ±10dB from 100 Hz to 7000 Hz for each and every microphone used to record the unprocessed audio source.

  • [C-1-3] MUST exhibit amplitude levels in the low frequency range: specifically from ±20 dB from 5 Hz to 100 Hz compared to the mid-frequency range for each and every microphone used to record the unprocessed audio source.

  • [C-1-4] MUST exhibit amplitude levels in the high frequency range: specifically from ±30 dB from 7000 Hz to 22 KHz compared to the mid-frequency range for each and every microphone used to record the unprocessed audio source.

  • [C-1-5] MUST set audio input sensitivity such that a 1000 Hz sinusoidal tone source played at 94 dB Sound Pressure Level (SPL) yields a response with RMS of 520 for 16 bit-samples (or -36 dB Full Scale for floating point/double precision samples) for each and every microphone used to record the unprocessed audio source.

  • [C-1-6] MUST have a signal-to-noise ratio (SNR) at 60 dB or higher for each and every microphone used to record the unprocessed audio source. (whereas the SNR is measured as the difference between 94 dB SPL and equivalent SPL of self noise, A-weighted).

  • [C-1-7] MUST have a total harmonic distortion (THD) less than be less than 1% for 1 kHZ at 90 dB SPL input level at each and every microphone used to record the unprocessed audio source.

  • MUST not have any other signal processing (eg Automatic Gain Control, High Pass Filter, or Echo cancellation) in the path other than a level multiplier to bring the level to desired range. به عبارت دیگر:

  • [C-1-8] If any signal processing is present in the architecture for any reason, it MUST be disabled and effectively introduce zero delay or extra latency to the signal path.
  • [C-1-9] The level multiplier, while allowed to be on the path, MUST NOT introduce delay or latency to the signal path.

All SPL measurements are made directly next to the microphone under test. For multiple microphone configurations, these requirements apply to each microphone.

If device implementations declare android.hardware.microphone but do not support unprocessed audio source, they:

  • [C-2-1] MUST return null for the AudioManager.getProperty(PROPERTY_SUPPORT_AUDIO_SOURCE_UNPROCESSED) API method, to properly indicate the lack of support.
  • [SR] are still STRONGLY RECOMMENDED to satisfy as many of the requirements for the signal path for the unprocessed recording source.

6. سازگاری با ابزارها و گزینه های توسعه دهنده

6.1. ابزارهای توسعه دهنده

پیاده سازی دستگاه:

  • [C-0-1] MUST support the Android Developer Tools provided in the Android SDK.
  • Android Debug Bridge (adb)

    • [C-0-2] MUST support adb as documented in the Android SDK and the shell commands provided in the AOSP, which can be used by app developers, including dumpsys and cmd stats .
    • [C-0-3] MUST NOT alter the format or the contents of device system events (batterystats , diskstats, fingerprint, graphicsstats, netstats, notification, procstats) logged via the dumpsys command.
    • [C-0-10] MUST record, without omission, and make the following events accessible and available to the cmd stats shell command and the StatsManager System API class.
      • ActivityForegroundStateChanged
      • AnomalyDetected
      • AppBreadcrumbReported
      • AppCrashOccurred
      • AppStartOccurred
      • BatteryLevelChanged
      • BatterySaverModeStateChanged
      • BleScanResultReceived
      • BleScanStateChanged
      • ChargingStateChanged
      • DeviceIdleModeStateChanged
      • ForegroundServiceStateChanged
      • GpsScanStateChanged
      • JobStateChanged
      • PluggedStateChanged
      • ScheduledJobStateChanged
      • ScreenStateChanged
      • SyncStateChanged
      • SystemElapsedRealtime
      • UidProcessStateChanged
      • WakelockStateChanged
      • WakeupAlarmOccurred
      • WifiLockStateChanged
      • WifiMulticastLockStateChanged
      • WifiScanStateChanged
    • [C-0-4] MUST have the device-side adb daemon be inactive by default and there MUST be a user-accessible mechanism to turn on the Android Debug Bridge.
    • [C-0-5] MUST support secure adb. Android includes support for secure adb. Secure adb enables adb on known authenticated hosts.
    • [C-0-6] MUST provide a mechanism allowing adb to be connected from a host machine. مثلا:

      • Device implementations without a USB port supporting peripheral mode MUST implement adb via local-area network (such as Ethernet or Wi-Fi).
      • MUST provide drivers for Windows 7, 9 and 10, allowing developers to connect to the device using the adb protocol.
  • Dalvik Debug Monitor Service (ddms)

    • [C-0-7] MUST support all ddms features as documented in the Android SDK. As ddms uses adb, support for ddms SHOULD be inactive by default, but MUST be supported whenever the user has activated the Android Debug Bridge, as above.
  • میمون
    • [C-0-8] MUST include the Monkey framework and make it available for applications to use.
  • SysTrace
    • [C-0-9] MUST support the systrace tool as documented in the Android SDK. Systrace must be inactive by default and there MUST be a user-accessible mechanism to turn on Systrace.

If device implementations report the support of Vulkan 1.0 or higher via the android.hardware.vulkan.version feature flags, they:

  • [C-1-1] MUST provide an affordance for the app developer to enable/disable GPU debug layers.
  • [C-1-2] MUST, when the GPU debug layers are enabled, enumerate layers in libraries provided by external tools (ie not part of the platform or application package) found in debuggable applications' base directory to support vkEnumerateInstanceLayerProperties() and vkCreateInstance() API methods.

6.2. گزینه های توسعه دهنده

Android includes support for developers to configure application development-related settings.

Device implementations MUST provide a consistent experience for Developer Options, they:

  • [C-0-1] MUST honor the android.settings.APPLICATION_DEVELOPMENT_SETTINGS intent to show application development-related settings. The upstream Android implementation hides the Developer Options menu by default and enables users to launch Developer Options after pressing seven (7) times on the Settings > About Device > Build Number menu item.
  • [C-0-2] MUST hide Developer Options by default.
  • [C-0-3] MUST provide a clear mechanism that does not give preferential treatment to one third-party app as opposed to another to enable Developer Options. MUST provide a public visible document or website that describes how to enable Developer Options. This document or website MUST be linkable from the Android SDK documents.
  • SHOULD have an ongoing visual notification to the user when Developer Options is enabled and the safety of the user is of concern.
  • MAY temporarily limit access to the Developer Options menu, by visually hiding or disabling the menu, to prevent distraction for scenarios where the safety of the user is of concern.

7. سازگاری سخت افزار

If a device includes a particular hardware component that has a corresponding API for third-party developers:

  • [C-0-1] The device implementation MUST implement that API as described in the Android SDK documentation.

If an API in the SDK interacts with a hardware component that is stated to be optional and the device implementation does not possess that component:

  • [C-0-2] Complete class definitions (as documented by the SDK) for the component APIs MUST still be presented.
  • [C-0-3] The API's behaviors MUST be implemented as no-ops in some reasonable fashion.
  • [C-0-4] API methods MUST return null values where permitted by the SDK documentation.
  • [C-0-5] API methods MUST return no-op implementations of classes where null values are not permitted by the SDK documentation.
  • [C-0-6] API methods MUST NOT throw exceptions not documented by the SDK documentation.
  • [C-0-7] Device implementations MUST consistently report accurate hardware configuration information via the getSystemAvailableFeatures() and hasSystemFeature(String) methods on the android.content.pm.PackageManager class for the same build fingerprint.

A typical example of a scenario where these requirements apply is the telephony API: Even on non-phone devices, these APIs must be implemented as reasonable no-ops.

7.1. نمایشگر و گرافیک

Android includes facilities that automatically adjust application assets and UI layouts appropriately for the device to ensure that third-party applications run well on a variety of hardware configurations . Devices MUST properly implement these APIs and behaviors, as detailed in this section.

The units referenced by the requirements in this section are defined as follows:

  • physical diagonal size . The distance in inches between two opposing corners of the illuminated portion of the display.
  • dots per inch (dpi) . The number of pixels encompassed by a linear horizontal or vertical span of 1”. Where dpi values are listed, both horizontal and vertical dpi must fall within the range.
  • aspect ratio . The ratio of the pixels of the longer dimension to the shorter dimension of the screen. For example, a display of 480x854 pixels would be 854/480 = 1.779, or roughly “16:9”.
  • density-independent pixel (dp) . The virtual pixel unit normalized to a 160 dpi screen, calculated as: pixels = dps * (density/160).

7.1.1. پیکربندی صفحه نمایش

7.1.1.1. Screen Size and Shape

The Android UI framework supports a variety of different logical screen layout sizes, and allows applications to query the current configuration's screen layout size via Configuration.screenLayout with the SCREENLAYOUT_SIZE_MASK and Configuration.smallestScreenWidthDp .

پیاده سازی دستگاه:

  • [C-0-1] MUST report the correct layout size for the Configuration.screenLayout as defined in the Android SDK documentation. Specifically, device implementations MUST report the correct logical density-independent pixel (dp) screen dimensions as below:

    • Devices with the Configuration.uiMode set as any value other than UI_MODE_TYPE_WATCH, and reporting a small size for the Configuration.screenLayout , MUST have at least 426 dp x 320 dp.
    • Devices reporting a normal size for the Configuration.screenLayout , MUST have at least 480 dp x 320 dp.
    • Devices reporting a large size for the Configuration.screenLayout , MUST have at least 640 dp x 480 dp.
    • Devices reporting a xlarge size for the Configuration.screenLayout , MUST have at least 960 dp x 720 dp.
  • [C-0-2] MUST correctly honor applications' stated support for screen sizes through the < supports-screens > attribute in the AndroidManifest.xml, as described in the Android SDK documentation.

  • MAY have a display with rounded corners.

If device implementations support UI_MODE_TYPE_NORMAL and include a display with rounded corners, they:

  • [C-1-1] MUST ensure that the radius of the rounded corners is less than or equal to 38 dp.
  • SHOULD include user affordance to switch to the display mode with the rectangular corners.
7.1.1.2. نسبت ابعاد صفحه نمایش

While there is no restriction to the screen aspect ratio value of the physical screen display, the screen aspect ratio of the logical display that third-party apps are rendered within, as can be derived from the height and width values reported through the view.Display APIs and Configuration API, MUST meet the following requirements:

  • [C-0-1] Device implementations with the Configuration.uiMode set as UI_MODE_TYPE_NORMAL MUST have an aspect ratio value between 1.3333 (4:3) and 1.86 (roughly 16:9), unless the app can be deemed as ready to be stretched longer by meeting one of the following conditions:

    • The app has declared that it supports a larger screen aspect ratio through the android.max_aspect metadata value.
    • The app declares it is resizeable via the android:resizeableActivity attribute.
    • The app is targeting API level 24 or higher and does not declare a android:MaxAspectRatio that would restrict the allowed aspect ratio.
  • [C-0-2] Device implementations with the Configuration.uiMode set as UI_MODE_TYPE_WATCH MUST have an aspect ratio value set as 1.0 (1:1).

7.1.1.3. تراکم صفحه نمایش

The Android UI framework defines a set of standard logical densities to help application developers target application resources.

  • [C-0-1] By default, device implementations MUST report only one of the following logical Android framework densities through the DENSITY_DEVICE_STABLE API and this value MUST NOT change at any time; however, the device MAY report a different arbitrary density according to the display configuration changes made by the user (for example, display size) set after initial boot.

    • 120 dpi (LDPI)
    • 160 dpi (MDPI)
    • 213 dpi (TVDPI)
    • 240 dpi (HDPI)
    • 260 dpi (260dpi)
    • 280 dpi (280dpi)
    • 300 dpi (300dpi)
    • 320 dpi (XHDPI)
    • 340 dpi (340dpi)
    • 360 dpi (360dpi)
    • 400 dpi (400dpi)
    • 420 dpi (420dpi)
    • 480 dpi (xxhdpi)
    • 560 dpi (560DPI)
    • 640 dpi (xxxhdpi)
  • Device implementations SHOULD define the standard Android framework density that is numerically closest to the physical density of the screen, unless that logical density pushes the reported screen size below the minimum supported. If the standard Android framework density that is numerically closest to the physical density results in a screen size that is smaller than the smallest supported compatible screen size (320 dp width), device implementations SHOULD report the next lowest standard Android framework density.

If there is an affordance to change the display size of the device:

  • [C-1-1] The display size MUST NOT be scaled any larger than 1.5 times the native density or produce an effective minimum screen dimension smaller than 320dp (equivalent to resource qualifier sw320dp), whichever comes first.
  • [C-1-2] Display size MUST NOT be scaled any smaller than 0.85 times the native density.
  • To ensure good usability and consistent font sizes, it is RECOMMENDED that the following scaling of Native Display options be provided (while complying with the limits specified above)
  • Small: 0.85x
  • Default: 1x (Native display scale)
  • Large: 1.15x
  • Larger: 1.3x
  • Largest 1.45x

7.1.2. معیارهای نمایش

If device implementations include a screen or video output, they:

If device implementations does not include an embedded screen or video output, they:

  • [C-2-1] MUST report reasonable values for all display metrics defined in the android.util.DisplayMetrics API for the emulated default view.Display .

7.1.3. جهت صفحه نمایش

پیاده سازی دستگاه:

  • [C-0-1] MUST report which screen orientations they support ( android.hardware.screen.portrait and/or android.hardware.screen.landscape ) and MUST report at least one supported orientation. For example, a device with a fixed orientation landscape screen, such as a television or laptop, SHOULD only report android.hardware.screen.landscape .
  • [C-0-2] MUST report the correct value for the device's current orientation, whenever queried via the android.content.res.Configuration.orientation , android.view.Display.getOrientation() , or other APIs.

If device implementations support both screen orientations, they:

  • [C-1-1] MUST support dynamic orientation by applications to either portrait or landscape screen orientation. That is, the device must respect the application's request for a specific screen orientation.
  • [C-1-2] MUST NOT change the reported screen size or density when changing orientation.
  • MAY select either portrait or landscape orientation as the default.

7.1.4. شتاب گرافیک دوبعدی و سه بعدی

7.1.4.1 OpenGL ES

پیاده سازی دستگاه:

  • [C-0-1] MUST correctly identify the supported OpenGL ES versions (1.1, 2.0, 3.0, 3.1, 3.2) through the managed APIs (such as via the GLES10.getString() method) and the native APIs.
  • [C-0-2] MUST include the support for all the corresponding managed APIs and native APIs for every OpenGL ES versions they identified to support.

If device implementations include a screen or video output, they:

  • [C-1-1] MUST support both OpenGL ES 1.1 and 2.0, as embodied and detailed in the Android SDK documentation .
  • [SR] are STRONGLY RECOMMENDED to support OpenGL ES 3.1.
  • SHOULD support OpenGL ES 3.2.

If device implementations support any of the OpenGL ES versions, they:

  • [C-2-1] MUST report via the OpenGL ES managed APIs and native APIs any other OpenGL ES extensions they have implemented, and conversely MUST NOT report extension strings that they do not support.
  • [C-2-2] MUST support the EGL_KHR_image , EGL_KHR_image_base , EGL_ANDROID_image_native_buffer , EGL_ANDROID_get_native_client_buffer , EGL_KHR_wait_sync , EGL_KHR_get_all_proc_addresses , EGL_ANDROID_presentation_time , EGL_KHR_swap_buffers_with_damage and EGL_ANDROID_recordable extensions.
  • [SR] are STRONGLY RECOMMENDED to support EGL_KHR_partial_update.
  • SHOULD accurately report via the getString() method, any texture compression format that they support, which is typically vendor-specific.

If device implementations declare support for OpenGL ES 3.0, 3.1, or 3.2, they:

  • [C-3-1] MUST export the corresponding function symbols for these version in addition to the OpenGL ES 2.0 function symbols in the libGLESv2.so library.

If device implementations support OpenGL ES 3.2, they:

  • [C-4-1] MUST support the OpenGL ES Android Extension Pack in its entirety.

If device implementations support the OpenGL ES Android Extension Pack in its entirety, they:

  • [C-5-1] MUST identify the support through the android.hardware.opengles.aep feature flag.

If device implementations expose support for the EGL_KHR_mutable_render_buffer extension, they:

  • [C-6-1] MUST also support the EGL_ANDROID_front_buffer_auto_refresh extension.
7.1.4.2 Vulkan

Android includes support for Vulkan , a low-overhead, cross-platform API for high-performance 3D graphics.

If device implementations support OpenGL ES 3.1, they:

  • [SR] Are STRONGLY RECOMMENDED to include support for Vulkan 1.1.

If device implementations include a screen or video output, they:

  • SHOULD include support for Vulkan 1.1.

If device implementations include support for Vulkan 1.0, they:

  • [C-1-1] MUST report the correct integer value with the android.hardware.vulkan.level and android.hardware.vulkan.version feature flags.
  • [C-1-2] MUST enumerate, at least one VkPhysicalDevice for the Vulkan native API vkEnumeratePhysicalDevices() .
  • [C-1-3] MUST fully implement the Vulkan 1.0 APIs for each enumerated VkPhysicalDevice .
  • [C-1-4] MUST enumerate layers, contained in native libraries named as libVkLayer*.so in the application package's native library directory, through the Vulkan native APIs vkEnumerateInstanceLayerProperties() and vkEnumerateDeviceLayerProperties() .
  • [C-1-5] MUST NOT enumerate layers provided by libraries outside of the application package, or provide other ways of tracing or intercepting the Vulkan API, unless the application has the android:debuggable attribute set as true .
  • [C-1-6] MUST report all extension strings that they do support via the Vulkan native APIs , and conversely MUST NOT report extension strings that they do not correctly support.
  • [C-1-7] MUST support the VK_KHR_surface, VK_KHR_android_surface, VK_KHR_swapchain, and VK_KHR_incremental_present extensions.

If device implementations do not include support for Vulkan 1.0, they:

  • [C-2-1] MUST NOT declare any of the Vulkan feature flags (eg android.hardware.vulkan.level , android.hardware.vulkan.version ).
  • [C-2-2] MUST NOT enumerate any VkPhysicalDevice for the Vulkan native API vkEnumeratePhysicalDevices() .

If device implementations include support for Vulkan 1.1, they:

  • [C-3-1] MUST expose support for the SYNC_FD external semaphore and handle types.
  • [SR] Are STRONGLY RECOMMENDED to support the VK_ANDROID_external_memory_android_hardware_buffer extension.
7.1.4.3 RenderScript
  • [C-0-1] Device implementations MUST support Android RenderScript , as detailed in the Android SDK documentation.
7.1.4.4 2D Graphics Acceleration

Android includes a mechanism for applications to declare that they want to enable hardware acceleration for 2D graphics at the Application, Activity, Window, or View level through the use of a manifest tag android:hardwareAccelerated or direct API calls.

پیاده سازی دستگاه:

  • [C-0-1] MUST enable hardware acceleration by default, and MUST disable hardware acceleration if the developer so requests by setting android:hardwareAccelerated="false” or disabling hardware acceleration directly through the Android View APIs.
  • [C-0-2] MUST exhibit behavior consistent with the Android SDK documentation on hardware acceleration .

Android includes a TextureView object that lets developers directly integrate hardware-accelerated OpenGL ES textures as rendering targets in a UI hierarchy.

پیاده سازی دستگاه:

  • [C-0-3] MUST support the TextureView API, and MUST exhibit consistent behavior with the upstream Android implementation.
7.1.4.5 Wide-gamut Displays

If device implementations claim support for wide-gamut displays through Configuration.isScreenWideColorGamut() , they:

  • [C-1-1] MUST have a color-calibrated display.
  • [C-1-2] MUST have a display whose gamut covers the sRGB color gamut entirely in CIE 1931 xyY space.
  • [C-1-3] MUST have a display whose gamut has an area of at least 90% of DCI-P3 in CIE 1931 xyY space.
  • [C-1-4] MUST support OpenGL ES 3.1 or 3.2 and report it properly.
  • [C-1-5] MUST advertise support for the EGL_KHR_no_config_context , EGL_EXT_pixel_format_float , EGL_KHR_gl_colorspace , EGL_EXT_gl_colorspace_scrgb , EGL_EXT_gl_colorspace_scrgb_linear , EGL_EXT_gl_colorspace_display_p3 , and EGL_KHR_gl_colorspace_display_p3 extensions.
  • [SR] Are STRONGLY RECOMMENDED to support GL_EXT_sRGB .

Conversely, if device implementations do not support wide-gamut displays, they:

  • [C-2-1] SHOULD cover 100% or more of sRGB in CIE 1931 xyY space, although the screen color gamut is undefined.

7.1.5. حالت سازگاری برنامه قدیمی

Android specifies a “compatibility mode” in which the framework operates in a 'normal' screen size equivalent (320dp width) mode for the benefit of legacy applications not developed for old versions of Android that pre-date screen-size independence.

7.1.6. فناوری صفحه نمایش

The Android platform includes APIs that allow applications to render rich graphics to the display. Devices MUST support all of these APIs as defined by the Android SDK unless specifically allowed in this document.

پیاده سازی دستگاه:

  • [C-0-1] MUST support displays capable of rendering 16-bit color graphics.
  • SHOULD support displays capable of 24-bit color graphics.
  • [C-0-2] MUST support displays capable of rendering animations.
  • [C-0-3] MUST use the display technology that have a pixel aspect ratio (PAR) between 0.9 and 1.15. That is, the pixel aspect ratio MUST be near square (1.0) with a 10 ~ 15% tolerance.

7.1.7. نمایشگرهای ثانویه

Android includes support for secondary display to enable media sharing capabilities and developer APIs for accessing external displays.

If device implementations support an external display either via a wired, wireless, or an embedded additional display connection, they:

  • [C-1-1] MUST implement the DisplayManager system service and API as described in the Android SDK documentation.

7.2. دستگاه های ورودی

پیاده سازی دستگاه:

7.2.1. صفحه کلید

If device implementations include support for third-party Input Method Editor (IME) applications, they:

Device implementations: * [C-0-1] MUST NOT include a hardware keyboard that does not match one of the formats specified in android.content.res.Configuration.keyboard (QWERTY or 12-key). * SHOULD include additional soft keyboard implementations. * MAY include a hardware keyboard.

7.2.2. ناوبری بدون لمس

Android includes support for d-pad, trackball, and wheel as mechanisms for non-touch navigation.

پیاده سازی دستگاه:

If device implementations lack non-touch navigations, they:

  • [C-1-1] MUST provide a reasonable alternative user interface mechanism for the selection and editing of text, compatible with Input Management Engines. The upstream Android open source implementation includes a selection mechanism suitable for use with devices that lack non-touch navigation inputs.

7.2.3. کلیدهای ناوبری

The Home , Recents , and Back functions typically provided via an interaction with a dedicated physical button or a distinct portion of the touch screen, are essential to the Android navigation paradigm and therefore, device implementations:

  • [C-0-1] MUST provide a user affordance to launch installed applications that have an activity with the <intent-filter> set with ACTION=MAIN and CATEGORY=LAUNCHER or CATEGORY=LEANBACK_LAUNCHER for Television device implementations. The Home function SHOULD be the mechanism for this user affordance.
  • SHOULD provide buttons for the Recents and Back function.

If the Home, Recents, or Back functions are provided, they:

  • [C-1-1] MUST be accessible with a single action (eg tap, double-click or gesture) when any of them are accessible.
  • [C-1-2] MUST provide a clear indication of which single action would trigger each function. Having a visible icon imprinted on the button, showing a software icon on the navigation bar portion of the screen, or walking the user through a guided step-by-step demo flow during the out-of-box setup experience are examples of such an نشانه

پیاده سازی دستگاه:

  • [SR] are STRONGLY RECOMMENDED to not provide the input mechanism for the Menu function as it is deprecated in favor of action bar since Android 4.0.

If device implementations provide the Menu function, they:

  • [C-2-1] MUST display the action overflow button whenever the action overflow menu popup is not empty and the action bar is visible.
  • [C-2-2] MUST NOT modify the position of the action overflow popup displayed by selecting the overflow button in the action bar, but MAY render the action overflow popup at a modified position on the screen when it is displayed by selecting the Menu تابع.

If device implementations do not provide the Menu function, for backwards compatibility, they: * [C-3-1] MUST make the Menu function available to applications when targetSdkVersion is less than 10, either by a physical button, a software key, or ژست ها This Menu function should be accessible unless hidden together with other navigation functions.

If device implementations provide the Assist function , they: * [C-4-1] MUST make the Assist function accessible with a single action (eg tap, double-click or gesture) when other navigation keys are accessible. * [SR] STRONGLY RECOMMENDED to use long press on HOME function as this designated interaction.

If device implementations use a distinct portion of the screen to display the navigation keys, they:

  • [C-5-1] Navigation keys MUST use a distinct portion of the screen, not available to applications, and MUST NOT obscure or otherwise interfere with the portion of the screen available to applications.
  • [C-5-2] MUST make available a portion of the display to applications that meets the requirements defined in section 7.1.1 .
  • [C-5-3] MUST honor the flags set by the app through the View.setSystemUiVisibility() API method, so that this distinct portion of the screen (aka the navigation bar) is properly hidden away as documented in the SDK.

7.2.4. ورودی صفحه لمسی

Android includes support for a variety of pointer input systems, such as touchscreens, touch pads, and fake touch input devices. Touchscreen-based device implementations are associated with a display such that the user has the impression of directly manipulating items on screen. Since the user is directly touching the screen, the system does not require any additional affordances to indicate the objects being manipulated.

پیاده سازی دستگاه:

  • SHOULD have a pointer input system of some kind (either mouse-like or touch).
  • SHOULD support fully independently tracked pointers.

If device implementations include a touchscreen (single-touch or better), they:

  • [C-1-1] MUST report TOUCHSCREEN_FINGER for the Configuration.touchscreen API field.
  • [C-1-2] MUST report the android.hardware.touchscreen and android.hardware.faketouch feature flags.

If device implementations include a touchscreen that can track more than a single touch, they:

  • [C-2-1] MUST report the appropriate feature flags android.hardware.touchscreen.multitouch , android.hardware.touchscreen.multitouch.distinct , android.hardware.touchscreen.multitouch.jazzhand corresponding to the type of the specific touchscreen on the دستگاه

If device implementations do not include a touchscreen (and rely on a pointer device only) and meet the fake touch requirements in section 7.2.5 , they:

  • [C-3-1] MUST NOT report any feature flag starting with android.hardware.touchscreen and MUST report only android.hardware.faketouch .

7.2.5. ورودی لمسی جعلی

Fake touch interface provides a user input system that approximates a subset of touchscreen capabilities. For example, a mouse or remote control that drives an on-screen cursor approximates touch, but requires the user to first point or focus then click. Numerous input devices like the mouse, trackpad, gyro-based air mouse, gyro-pointer, joystick, and multi-touch trackpad can support fake touch interactions. Android includes the feature constant android.hardware.faketouch, which corresponds to a high-fidelity non-touch (pointer-based) input device such as a mouse or trackpad that can adequately emulate touch-based input (including basic gesture support), and indicates that the device supports an emulated subset of touchscreen functionality.

If device implementations do not include a touchscreen but include another pointer input system which they want to make available, they:

  • SHOULD declare support for the android.hardware.faketouch feature flag.

If device implementations declare support for android.hardware.faketouch , they:

  • [C-1-1] MUST report the absolute X and Y screen positions of the pointer location and display a visual pointer on the screen.
  • [C-1-2] MUST report touch event with the action code that specifies the state change that occurs on the pointer going down or up on the screen .
  • [C-1-3] MUST support pointer down and up on an object on the screen, which allows users to emulate tap on an object on the screen.
  • [C-1-4] MUST support pointer down, pointer up, pointer down then pointer up in the same place on an object on the screen within a time threshold, which allows users to emulate double tap on an object on the screen.
  • [C-1-5] MUST support pointer down on an arbitrary point on the screen, pointer move to any other arbitrary point on the screen, followed by a pointer up, which allows users to emulate a touch drag.
  • [C-1-6] MUST support pointer down then allow users to quickly move the object to a different position on the screen and then pointer up on the screen, which allows users to fling an object on the screen.
  • [C-1-7] MUST report TOUCHSCREEN_NOTOUCH for the Configuration.touchscreen API field.

If device implementations declare support for android.hardware.faketouch.multitouch.distinct , they:

  • [C-2-1] MUST declare support for android.hardware.faketouch .
  • [C-2-2] MUST support distinct tracking of two or more independent pointer inputs.

If device implementations declare support for android.hardware.faketouch.multitouch.jazzhand , they:

  • [C-3-1] MUST declare support for android.hardware.faketouch .
  • [C-3-2] MUST support distinct tracking of 5 (tracking a hand of fingers) or more pointer inputs fully independently.

7.2.6. پشتیبانی از کنترلر بازی

7.2.6.1. نگاشت دکمه ها

If device implementations declare the android.hardware.gamepad feature flag, they:

  • [C-1-1] MUST have embed a controller or ship with a separate controller in the box, that would provide means to input all the events listed in the below tables.
  • [C-1-2] MUST be capable to map HID events to it's associated Android view.InputEvent constants as listed in the below tables. The upstream Android implementation includes implementation for game controllers that satisfies this requirement.
دکمه HID Usage 2 Android Button
الف 1 0x09 0x0001 KEYCODE_BUTTON_A (96)
ب 1 0x09 0x0002 KEYCODE_BUTTON_B (97)
X 1 0x09 0x0004 KEYCODE_BUTTON_X (99)
Y 1 0x09 0x0005 KEYCODE_BUTTON_Y (100)
D-pad up 1
D-pad down 1
0x01 0x0039 3 AXIS_HAT_Y 4
D-pad left 1
D-pad right 1
0x01 0x0039 3 AXIS_HAT_X 4
Left shoulder button 1 0x09 0x0007 KEYCODE_BUTTON_L1 (102)
Right shoulder button 1 0x09 0x0008 KEYCODE_BUTTON_R1 (103)
Left stick click 1 0x09 0x000E KEYCODE_BUTTON_THUMBL (106)
Right stick click 1 0x09 0x000F KEYCODE_BUTTON_THUMBR (107)
خانه 1 0x0c 0x0223 KEYCODE_HOME (3)
Back 1 0x0c 0x0224 KEYCODE_BACK (4)

1 KeyEvent

2 The above HID usages must be declared within a Game pad CA (0x01 0x0005).

3 This usage must have a Logical Minimum of 0, a Logical Maximum of 7, a Physical Minimum of 0, a Physical Maximum of 315, Units in Degrees, and a Report Size of 4. The logical value is defined to be the clockwise rotation away from the vertical axis; for example, a logical value of 0 represents no rotation and the up button being pressed, while a logical value of 1 represents a rotation of 45 degrees and both the up and left keys being pressed.

4 MotionEvent

Analog Controls 1 HID Usage Android Button
Left Trigger 0x02 0x00C5 AXIS_LTRIGGER
Right Trigger 0x02 0x00C4 AXIS_RTRIGGER
جوی استیک چپ 0x01 0x0030
0x01 0x0031
AXIS_X
AXIS_Y
جوی استیک راست 0x01 0x0032
0x01 0x0035
AXIS_Z
AXIS_RZ

1 MotionEvent

7.2.7. کنترل از راه دور

See Section 2.3.1 for device-specific requirements.

7.3. حسگرها

If device implementations include a particular sensor type that has a corresponding API for third-party developers, the device implementation MUST implement that API as described in the Android SDK documentation and the Android Open Source documentation on sensors .

پیاده سازی دستگاه:

  • [C-0-1] MUST accurately report the presence or absence of sensors per the android.content.pm.PackageManager class.
  • [C-0-2] MUST return an accurate list of supported sensors via the SensorManager.getSensorList() and similar methods.
  • [C-0-3] MUST behave reasonably for all other sensor APIs (for example, by returning true or false as appropriate when applications attempt to register listeners, not calling sensor listeners when the corresponding sensors are not present; etc.).

If device implementations include a particular sensor type that has a corresponding API for third-party developers, they:

  • [C-1-1] MUST report all sensor measurements using the relevant International System of Units (metric) values for each sensor type as defined in the Android SDK documentation.
  • [C-1-2] MUST report sensor data with a maximum latency of 100 milliseconds + 2 * sample_time for the case of a sensor streamed with a minimum required latency of 5 ms + 2 * sample_time when the application processor is active. This delay does not include any filtering delays.
  • [C-1-3] MUST report the first sensor sample within 400 milliseconds + 2 * sample_time of the sensor being activated. It is acceptable for this sample to have an accuracy of 0.
  • [SR] SHOULD report the event time in nanoseconds as defined in the Android SDK documentation, representing the time the event happened and synchronized with the SystemClock.elapsedRealtimeNano() clock. Existing and new Android devices are STRONGLY RECOMMENDED to meet these requirements so they will be able to upgrade to the future platform releases where this might become a REQUIRED component. The synchronization error SHOULD be below 100 milliseconds.

  • [C-1-4] For any API indicated by the Android SDK documentation to be a continuous sensor , device implementations MUST continuously provide periodic data samples that SHOULD have a jitter below 3%, where jitter is defined as the standard deviation of the difference of the reported timestamp values between consecutive events.

  • [C-1-5] MUST ensure that the sensor event stream MUST NOT prevent the device CPU from entering a suspend state or waking up from a suspend state.

  • When several sensors are activated, the power consumption SHOULD NOT exceed the sum of the individual sensor's reported power consumption.

The list above is not comprehensive; the documented behavior of the Android SDK and the Android Open Source Documentations on sensors is to be considered authoritative.

Some sensor types are composite, meaning they can be derived from data provided by one or more other sensors. (Examples include the orientation sensor and the linear acceleration sensor.)

پیاده سازی دستگاه:

  • SHOULD implement these sensor types, when they include the prerequisite physical sensors as described in sensor types .

If device implementations include a composite sensor, they:

  • [C-2-1] MUST implement the sensor as described in the Android Open Source documentation on composite sensors .

7.3.1. شتاب سنج

  • Device implementations SHOULD include a 3-axis accelerometer.

If device implementations include a 3-axis accelerometer, they:

  • [C-1-1] MUST be able to report events up to a frequency of at least 50 Hz.
  • [C-1-2] MUST implement and report TYPE_ACCELEROMETER sensor.
  • [C-1-3] MUST comply with the Android sensor coordinate system as detailed in the Android APIs.
  • [C-1-4] MUST be capable of measuring from freefall up to four times the gravity(4g) or more on any axis.
  • [C-1-5] MUST have a resolution of at least 12-bits.
  • [C-1-6] MUST have a standard deviation no greater than 0.05 m/s^, where the standard deviation should be calculated on a per axis basis on samples collected over a period of at least 3 seconds at the fastest sampling rate.
  • [SR] are STRONGLY RECOMMENDED to implement the TYPE_SIGNIFICANT_MOTION composite sensor.
  • [SR] are STRONGLY RECOMMENDED to implement the TYPE_ACCELEROMETER_UNCALIBRATED sensor if online accelerometer calibration is available.
  • SHOULD implement the TYPE_SIGNIFICANT_MOTION , TYPE_TILT_DETECTOR , TYPE_STEP_DETECTOR , TYPE_STEP_COUNTER composite sensors as described in the Android SDK document.
  • SHOULD report events up to at least 200 Hz.
  • SHOULD have a resolution of at least 16-bits.
  • SHOULD be calibrated while in use if the characteristics changes over the life cycle and compensated, and preserve the compensation parameters between device reboots.
  • SHOULD be temperature compensated.
  • SHOULD also implement TYPE_ACCELEROMETER_UNCALIBRATED sensor.

If device implementations include a 3-axis accelerometer and any of the TYPE_SIGNIFICANT_MOTION , TYPE_TILT_DETECTOR , TYPE_STEP_DETECTOR , TYPE_STEP_COUNTER composite sensors are implemented:

  • [C-2-1] The sum of their power consumption MUST always be less than 4 mW.
  • SHOULD each be below 2 mW and 0.5 mW for when the device is in a dynamic or static condition.

If device implementations include a 3-axis accelerometer and a gyroscope sensor, they:

  • [C-3-1] MUST implement the TYPE_GRAVITY and TYPE_LINEAR_ACCELERATION composite sensors.
  • SHOULD implement the TYPE_GAME_ROTATION_VECTOR composite sensor.
  • [SR] Existing and new Android devices are STRONGLY RECOMMENDED to implement the TYPE_GAME_ROTATION_VECTOR sensor.

If device implementations include a 3-axis accelerometer, a gyroscope sensor and a magnetometer sensor, they:

  • [C-4-1] MUST implement a TYPE_ROTATION_VECTOR composite sensor.

7.3.2. مغناطیس سنج

  • Device implementations SHOULD include a 3-axis magnetometer (compass).

If device implementations include a 3-axis magnetometer, they:

  • [C-1-1] MUST implement the TYPE_MAGNETIC_FIELD sensor.
  • [C-1-2] MUST be able to report events up to a frequency of at least 10 Hz and SHOULD report events up to at least 50 Hz.
  • [C-1-3] MUST comply with the Android sensor coordinate system as detailed in the Android APIs.
  • [C-1-4] MUST be capable of measuring between -900 µT and +900 µT on each axis before saturating.
  • [C-1-5] MUST have a hard iron offset value less than 700 µT and SHOULD have a value below 200 µT, by placing the magnetometer far from dynamic (current-induced) and static (magnet-induced) magnetic fields.
  • [C-1-6] MUST have a resolution equal or denser than 0.6 µT.
  • [C-1-7] MUST support online calibration and compensation of the hard iron bias, and preserve the compensation parameters between device reboots.
  • [C-1-8] MUST have the soft iron compensation applied—the calibration can be done either while in use or during the production of the device.
  • [C-1-9] MUST have a standard deviation, calculated on a per axis basis on samples collected over a period of at least 3 seconds at the fastest sampling rate, no greater than 1.5 µT; SHOULD have a standard deviation no greater than 0.5 µT.
  • SHOULD implement TYPE_MAGNETIC_FIELD_UNCALIBRATED sensor.
  • [SR] Existing and new Android devices are STRONGLY RECOMMENDED to implement the TYPE_MAGNETIC_FIELD_UNCALIBRATED sensor.

If device implementations include a 3-axis magnetometer, an accelerometer sensor and a gyroscope sensor, they:

  • [C-2-1] MUST implement a TYPE_ROTATION_VECTOR composite sensor.

If device implementations include a 3-axis magnetometer, an accelerometer, they:

  • MAY implement the TYPE_GEOMAGNETIC_ROTATION_VECTOR sensor.

If device implementations include a 3-axis magnetometer, an accelerometer and TYPE_GEOMAGNETIC_ROTATION_VECTOR sensor, they:

  • [C-3-1] MUST consume less than 10 mW.
  • SHOULD consume less than 3 mW when the sensor is registered for batch mode at 10 Hz.

7.3.3. جی پی اس

پیاده سازی دستگاه:

  • SHOULD include a GPS/GNSS receiver.

If device implementations include a GPS/GNSS receiver and report the capability to applications through the android.hardware.location.gps feature flag, they:

  • [C-1-1] MUST support location outputs at a rate of at least 1 Hz when requested via LocationManager#requestLocationUpdate .
  • [C-1-2] MUST be able to determine the location in open-sky conditions (strong signals, negligible multipath, HDOP < 2) within 10 seconds (fast time to first fix), when connected to a 0.5 Mbps or faster data speed internet connection. This requirement is typically met by the use of some form of Assisted or Predicted GPS/GNSS technique to minimize GPS/GNSS lock-on time (Assistance data includes Reference Time, Reference Location and Satellite Ephemeris/Clock).
    • [C-1-6] After making such a location calculation, device implementations MUST determine its location, in open sky, within 5 seconds, when location requests are restarted, up to an hour after the initial location calculation, even when the subsequent request is made without a data connection, and/or after a power cycle.
  • In open sky conditions after determining the location, while stationary or moving with less than 1 meter per second squared of acceleration:

    • [C-1-3] MUST be able to determine location within 20 meters, and speed within 0.5 meters per second, at least 95% of the time.
    • [C-1-4] MUST simultaneously track and report via GnssStatus.Callback at least 8 satellites from one constellation.
    • SHOULD be able to simultaneously track at least 24 satellites, from multiple constellations (eg GPS + at least one of Glonass, Beidou, Galileo).
    • [C-1-5] MUST report the GNSS technology generation through the test API 'getGnssYearOfHardware'.
    • [SR] Continue to deliver normal GPS/GNSS location outputs during an emergency phone call.
    • [SR] Report GNSS measurements from all constellations tracked (as reported in GnssStatus messages), with the exception of SBAS.
    • [SR] Report AGC, and Frequency of GNSS measurement.
    • [SR] Report all accuracy estimates (including Bearing, Speed, and Vertical) as part of each GPS/GNSS location.
    • [SR] are STRONGLY RECOMMENDED to meet as many as possible from the additional mandatory requirements for devices reporting the year "2016" or "2017" through the Test API LocationManager.getGnssYearOfHardware() .

If device implementations include a GPS/GNSS receiver and report the capability to applications through the android.hardware.location.gps feature flag and the LocationManager.getGnssYearOfHardware() Test API reports the year "2016" or newer, they:

  • [C-2-1] MUST report GNSS measurements, as soon as they are found, even if a location calculated from GPS/GNSS is not yet reported.
  • [C-2-2] MUST report GNSS pseudoranges and pseudorange rates, that, in open-sky conditions after determining the location, while stationary or moving with less than 0.2 meter per second squared of acceleration, are sufficient to calculate position within 20 meters, and speed within 0.2 meters per second, at least 95% of the time.

If device implementations include a GPS/GNSS receiver and report the capability to applications through the android.hardware.location.gps feature flag and the LocationManager.getGnssYearOfHardware() Test API reports the year "2017" or newer, they:

  • [C-3-1] MUST continue to deliver normal GPS/GNSS location outputs during an emergency phone call.
  • [C-3-2] MUST report GNSS measurements from all constellations tracked (as reported in GnssStatus messages), with the exception of SBAS.
  • [C-3-3] MUST report AGC, and Frequency of GNSS measurement.
  • [C-3-4] MUST report all accuracy estimates (including Bearing, Speed, and Vertical) as part of each GPS/GNSS location.

If device implementations include a GPS/GNSS receiver and report the capability to applications through the android.hardware.location.gps feature flag and the LocationManager.getGnssYearOfHardware() Test API reports the year "2018" or newer, they:

  • [C-4-1] MUST continue to deliver normal GPS/GNSS outputs to applications during a Mobile Station Based (MS-Based) Network Initiated emergency session call.
  • [C-4-2] MUST report positions and measurements to the GNSS Location Provider API's.

7.3.4. ژیروسکوپ

پیاده سازی دستگاه:

  • SHOULD include a gyroscope (angular change sensor).
  • SHOULD NOT include a gyroscope sensor unless a 3-axis accelerometer is also included.

If device implementations include a gyroscope, they:

  • [C-1-1] MUST be able to report events up to a frequency of at least 50 Hz.
  • [C-1-2] MUST implement the TYPE_GYROSCOPE sensor and SHOULD also implement TYPE_GYROSCOPE_UNCALIBRATED sensor.
  • [C-1-3] MUST be capable of measuring orientation changes up to 1,000 degrees per second.
  • [C-1-4] MUST have a resolution of 12-bits or more and SHOULD have a resolution of 16-bits or more.
  • [C-1-5] MUST be temperature compensated.
  • [C-1-6] MUST be calibrated and compensated while in use, and preserve the compensation parameters between device reboots.
  • [C-1-7] MUST have a variance no greater than 1e-7 rad^2 / s^2 per Hz (variance per Hz, or rad^2 / s). The variance is allowed to vary with the sampling rate, but MUST be constrained by this value. In other words, if you measure the variance of the gyro at 1 Hz sampling rate it SHOULD be no greater than 1e-7 rad^2/s^2.
  • [SR] Existing and new Android devices are STRONGLY RECOMMENDED to implement the SENSOR_TYPE_GYROSCOPE_UNCALIBRATED sensor.
  • [SR] Calibration error is STRONGLY RECOMMENDED to be less than 0.01 rad/s when device is stationary at room temperature.
  • SHOULD report events up to at least 200 Hz.

If device implementations include a gyroscope, an accelerometer sensor and a magnetometer sensor, they:

  • [C-2-1] MUST implement a TYPE_ROTATION_VECTOR composite sensor.

If device implementations include a gyroscope and a accelerometer sensor, they:

  • [C-3-1] MUST implement the TYPE_GRAVITY and TYPE_LINEAR_ACCELERATION composite sensors.
  • [SR] Existing and new Android devices are STRONGLY RECOMMENDED to implement the TYPE_GAME_ROTATION_VECTOR sensor.
  • SHOULD implement the TYPE_GAME_ROTATION_VECTOR composite sensor.

7.3.5. فشارسنج

  • Device implementations SHOULD include a barometer (ambient air pressure sensor).

If device implementations include a barometer, they:

  • [C-1-1] MUST implement and report TYPE_PRESSURE sensor.
  • [C-1-2] MUST be able to deliver events at 5 Hz or greater.
  • [C-1-3] MUST be temperature compensated.
  • [SR] STRONGLY RECOMMENDED to be able to report pressure measurements in the range 300hPa to 1100hPa.
  • SHOULD have an absolute accuracy of 1hPa.
  • SHOULD have a relative accuracy of 0.12hPa over 20hPa range (equivalent to ~1m accuracy over ~200m change at sea level).

7.3.6. دماسنج

Device implementations: * MAY include an ambient thermometer (temperature sensor). * MAY but SHOULD NOT include a CPU temperature sensor.

If device implementations include an ambient thermometer (temperature sensor), they:

  • [C-1-1] MUST be defined as SENSOR_TYPE_AMBIENT_TEMPERATURE and MUST measure the ambient (room/vehicle cabin) temperature from where the user is interacting with the device in degrees Celsius.
  • [C-1-2] MUST be defined as SENSOR_TYPE_TEMPERATURE .
  • [C-1-3] MUST measure the temperature of the device CPU.
  • [C-1-4] MUST NOT measure any other temperature.

Note the SENSOR_TYPE_TEMPERATURE sensor type was deprecated in Android 4.0.

7.3.7. فتومتر

  • Device implementations MAY include a photometer (ambient light sensor).

7.3.8. سنسور مجاورت

  • Device implementations MAY include a proximity sensor.

If device implementations include a proximity sensor, they:

  • [C-1-1] MUST measure the proximity of an object in the same direction as the screen. That is, the proximity sensor MUST be oriented to detect objects close to the screen, as the primary intent of this sensor type is to detect a phone in use by the user. If device implementations include a proximity sensor with any other orientation, it MUST NOT be accessible through this API.
  • [C-1-2] MUST have 1-bit of accuracy or more.

7.3.9. سنسورهای با وفاداری بالا

If device implementations include a set of higher quality sensors as defined in this section, and make available them to third-party apps, they:

  • [C-1-1] MUST identify the capability through the android.hardware.sensor.hifi_sensors feature flag.

If device implementations declare android.hardware.sensor.hifi_sensors , they:

  • [C-2-1] MUST have a TYPE_ACCELEROMETER sensor which:

    • MUST have a measurement range between at least -8g and +8g, SHOULD have a measurement range between at least -16g and +16g.
    • MUST have a measurement resolution of at least 2048 LSB/g.
    • MUST have a minimum measurement frequency of 12.5 Hz or lower.
    • MUST have a maximum measurement frequency of 400 Hz or higher; SHOULD support the SensorDirectChannel RATE_VERY_FAST .
    • MUST have a measurement noise not above 400 μg/√Hz.
    • MUST implement a non-wake-up form of this sensor with a buffering capability of at least 3000 sensor events.
    • MUST have a batching power consumption not worse than 3 mW.
    • [C-SR] Is STRONGLY RECOMMENDED to have 3dB measurement bandwidth of at least 80% of Nyquist frequency, and white noise spectrum within this bandwidth.
    • SHOULD have an acceleration random walk less than 30 μg √Hz tested at room temperature.
    • SHOULD have a bias change vs. temperature of ≤ +/- 1 mg/°C.
    • SHOULD have a best-fit line non-linearity of ≤ 0.5%, and sensitivity change vs. temperature of ≤ 0.03%/C°.
    • SHOULD have cross-axis sensitivity of < 2.5 % and variation of cross-axis sensitivity < 0.2% in device operation temperature range.
  • [C-2-2] MUST have a TYPE_ACCELEROMETER_UNCALIBRATED with the same quality requirements as TYPE_ACCELEROMETER .

  • [C-2-3] MUST have a TYPE_GYROSCOPE sensor which:

    • MUST have a measurement range between at least -1000 and +1000 dps.
    • MUST have a measurement resolution of at least 16 LSB/dps.
    • MUST have a minimum measurement frequency of 12.5 Hz or lower.
    • MUST have a maximum measurement frequency of 400 Hz or higher; SHOULD support the SensorDirectChannel RATE_VERY_FAST .
    • MUST have a measurement noise not above 0.014°/s/√Hz.
    • [C-SR] Is STRONGLY RECOMMENDED to have 3dB measurement bandwidth of at least 80% of Nyquist frequency, and white noise spectrum within this bandwidth.
    • SHOULD have a rate random walk less than 0.001 °/s √Hz tested at room temperature.
    • SHOULD have a bias change vs. temperature of ≤ +/- 0.05 °/ s / °C.
    • SHOULD have a sensitivity change vs. temperature of ≤ 0.02% / °C.
    • SHOULD have a best-fit line non-linearity of ≤ 0.2%.
    • SHOULD have a noise density of ≤ 0.007 °/s/√Hz.
    • SHOULD have calibration error less than 0.002 rad/s in temperature range 10 ~ 40 ℃ when device is stationary.
    • SHOULD have g-sensitivity less than 0.1°/s/g.
    • SHOULD have cross-axis sensitivity of < 4.0 % and cross-axis sensitivity variation < 0.3% in device operation temperature range.
  • [C-2-4] MUST have a TYPE_GYROSCOPE_UNCALIBRATED with the same quality requirements as TYPE_GYROSCOPE .

  • [C-2-5] MUST have a TYPE_GEOMAGNETIC_FIELD sensor which:

    • MUST have a measurement range between at least -900 and +900 μT.
    • MUST have a measurement resolution of at least 5 LSB/uT.
    • MUST have a minimum measurement frequency of 5 Hz or lower.
    • MUST have a maximum measurement frequency of 50 Hz or higher.
    • MUST have a measurement noise not above 0.5 uT.
  • [C-2-6] MUST have a TYPE_MAGNETIC_FIELD_UNCALIBRATED with the same quality requirements as TYPE_GEOMAGNETIC_FIELD and in addition:

    • MUST implement a non-wake-up form of this sensor with a buffering capability of at least 600 sensor events.
    • [C-SR] Is STRONGLY RECOMMENDED to have white noise spectrum from 1 Hz to at least 10 Hz when the report rate is 50 Hz or higher.
  • [C-2-7] MUST have a TYPE_PRESSURE sensor which:

    • MUST have a measurement range between at least 300 and 1100 hPa.
    • MUST have a measurement resolution of at least 80 LSB/hPa.
    • MUST have a minimum measurement frequency of 1 Hz or lower.
    • MUST have a maximum measurement frequency of 10 Hz or higher.
    • MUST have a measurement noise not above 2 Pa/√Hz.
    • MUST implement a non-wake-up form of this sensor with a buffering capability of at least 300 sensor events.
    • MUST have a batching power consumption not worse than 2 mW.
  • [C-2-8] MUST have a TYPE_GAME_ROTATION_VECTOR sensor which:
    • MUST implement a non-wake-up form of this sensor with a buffering capability of at least 300 sensor events.
    • MUST have a batching power consumption not worse than 4 mW.
  • [C-2-9] MUST have a TYPE_SIGNIFICANT_MOTION sensor which:
    • MUST have a power consumption not worse than 0.5 mW when device is static and 1.5 mW when device is moving.
  • [C-2-10] MUST have a TYPE_STEP_DETECTOR sensor which:
    • MUST implement a non-wake-up form of this sensor with a buffering capability of at least 100 sensor events.
    • MUST have a power consumption not worse than 0.5 mW when device is static and 1.5 mW when device is moving.
    • MUST have a batching power consumption not worse than 4 mW.
  • [C-2-11] MUST have a TYPE_STEP_COUNTER sensor which:
    • MUST have a power consumption not worse than 0.5 mW when device is static and 1.5 mW when device is moving.
  • [C-2-12] MUST have a TILT_DETECTOR sensor which:
    • MUST have a power consumption not worse than 0.5 mW when device is static and 1.5 mW when device is moving.
  • [C-2-13] The event timestamp of the same physical event reported by the Accelerometer, Gyroscope, and Magnetometer MUST be within 2.5 milliseconds of each other. The event timestamp of the same physical event reported by the Accelerometer and Gyroscope SHOULD be within 0.25 milliseconds of each other.
  • [C-2-14] MUST have Gyroscope sensor event timestamps on the same time base as the camera subsystem and within 1 milliseconds of error.
  • [C-2-15] MUST deliver samples to applications within 5 milliseconds from the time when the data is available on any of the above physical sensors to the application.
  • [C-2-16] MUST NOT have a power consumption higher than 0.5 mW when device is static and 2.0 mW when device is moving when any combination of the following sensors are enabled:
    • SENSOR_TYPE_SIGNIFICANT_MOTION
    • SENSOR_TYPE_STEP_DETECTOR
    • SENSOR_TYPE_STEP_COUNTER
    • SENSOR_TILT_DETECTORS
  • [C-2-17] MAY have a TYPE_PROXIMITY sensor, but if present MUST have a minimum buffer capability of 100 sensor events.

Note that all power consumption requirements in this section do not include the power consumption of the Application Processor. It is inclusive of the power drawn by the entire sensor chain—the sensor, any supporting circuitry, any dedicated sensor processing system, etc.

If device implementations include direct sensor support, they:

  • [C-3-1] MUST correctly declare support of direct channel types and direct report rates level through the isDirectChannelTypeSupported and getHighestDirectReportRateLevel API.
  • [C-3-2] MUST support at least one of the two sensor direct channel types for all sensors that declare support for sensor direct channel.
  • SHOULD support event reporting through sensor direct channel for primary sensor (non-wakeup variant) of the following types:
    • TYPE_ACCELEROMETER
    • TYPE_ACCELEROMETER_UNCALIBRATED
    • TYPE_GYROSCOPE
    • TYPE_GYROSCOPE_UNCALIBRATED
    • TYPE_MAGNETIC_FIELD
    • TYPE_MAGNETIC_FIELD_UNCALIBRATED

7.3.10. حسگرهای بیومتریک

7.3.10.1. حسگرهای اثر انگشت

If device implementations include a secure lock screen, they:

  • SHOULD include a fingerprint sensor.

If device implementations include a fingerprint sensor and make the sensor available to third-party apps, they:

  • [C-1-1] MUST declare support for the android.hardware.fingerprint feature.
  • [C-1-2] MUST fully implement the corresponding API as described in the Android SDK documentation.
  • [C-1-3] MUST have a false acceptance rate not higher than 0.002%.
  • [SR] Are STRONGLY RECOMMENDED to have a spoof and imposter acceptance rate not higher than 7%.
  • [C-1-4] MUST disclose that this mode may be less secure than a strong PIN, pattern, or password and clearly enumerate the risks of enabling it, if the spoof and imposter acceptance rates are higher than 7%.
  • [C-1-5] MUST rate limit attempts for at least 30 seconds after five false trials for fingerprint verification.
  • [C-1-6] MUST have a hardware-backed keystore implementation, and perform the fingerprint matching in a Trusted Execution Environment (TEE) or on a chip with a secure channel to the TEE.
  • [C-1-7] MUST have all identifiable fingerprint data encrypted and cryptographically authenticated such that they cannot be acquired, read or altered outside of the TEE, or a chip with a secure channel to the TEE as documented in the implementation guidelines on the Android Open Source Project site.
  • [C-1-8] MUST prevent adding a fingerprint without first establishing a chain of trust by having the user confirm existing or add a new device credential (PIN/pattern/password) that's secured by TEE; the Android Open Source Project implementation provides the mechanism in the framework to do so.
  • [C-1-9] MUST NOT enable 3rd-party applications to distinguish between individual fingerprints.
  • [C-1-10] MUST honor the DevicePolicyManager.KEYGUARD_DISABLE_FINGERPRINT flag.
  • [C-1-11] MUST, when upgraded from a version earlier than Android 6.0, have the fingerprint data securely migrated to meet the above requirements or removed.
  • [C-1-12] MUST completely remove all identifiable fingerprint data for a user when the user's account is removed (including via a factory reset).
  • [C-1-13] MUST not allow unencrypted access to identifiable fingerprint data or any data derived from it (such as embeddings) to the Application Processor.
  • [SR] Are STRONGLY RECOMMENDED to have a false rejection rate of less than 10%, as measured on the device.
  • [SR] Are STRONGLY RECOMMENDED to have a latency below 1 second, measured from when the fingerprint sensor is touched until the screen is unlocked, for one enrolled finger.
  • SHOULD use the Android Fingerprint icon provided in the Android Open Source Project.
7.3.10.2. Other Biometric Sensors

If device implementations include one or more non-fingerprint-based-biometric sensors and make them available to third-party apps they:

  • [C-1-1] MUST have a false acceptance rate not higher than 0.002%.
  • [C-SR] Are STRONGLY RECOMMENDED to have a spoof and imposter acceptance rate not higher than 7%.
  • [C-1-2] MUST disclose that this mode may be less secure than a strong PIN, pattern, or password and clearly enumerate the risks of enabling it, if the spoof and imposter acceptance rates are higher than 7%.
  • [C-1-3] MUST rate limit attempts for at least 30 seconds after five false trials for biometric verification - where a false trial is one with an adequate capture quality (ACQUIRED_GOOD) that does not match an enrolled biometric
  • [C-1-4] MUST have a hardware-backed keystore implementation, and perform the biometric matching in a TEE or on a chip with a secure channel to the TEE.
  • [C-1-5] MUST have all identifiable data encrypted and cryptographically authenticated such that they cannot be acquired, read or altered outside of the TEE, or a chip with a secure channel to the TEE as documented in the implementation guidelines on the Android Open Source Project site.
  • [C-1-6] MUST prevent adding new biometrics without first establishing a chain of trust by having the user confirm existing or add a new device credential (PIN/pattern/password) that's secured by TEE; the Android Open Source Project implementation provides the mechanism in the framework to do so.
  • [C-1-7] MUST NOT enable third-party applications to distinguish between biometric enrollments.
  • [C-1-8] MUST honor the individual flag for that biometric (ie: DevicePolicyManager.KEYGUARD_DISABLE_FINGERPRINT , DevicePolicymanager.KEYGUARD_DISABLE_FACE , or DevicePolicymanager.KEYGUARD_DISABLE_IRIS ).
  • [C-1-9] MUST completely remove all identifiable biometric data for a user when the user's account is removed (including via a factory reset).
  • [C-1-10] MUST not allow unencrypted access to identifiable biometric data or any data derived from it (such as embeddings) to the Application Processor outside the context of the TEE.
  • [C-SR] Are STRONGLY RECOMMENDED to have a false rejection rate of less than 10%, as measured on the device.
  • [C-SR] Are STRONGLY RECOMMENDED to have a latency below 1 second, measured from when the biometric is detected, until the screen is unlocked, for each enrolled biometric.

7.3.11. سنسورهای Android Automotive Only

Automotive-specific sensors are defined in the android.car.CarSensorManager API .

7.3.11.1. دنده فعلی

See Section 2.5.1 for device-specific requirements.

7.3.11.2. حالت روز شب

See Section 2.5.1 for device-specific requirements.

7.3.11.3. وضعیت رانندگی

This requirement is deprecated.

7.3.11.4. سرعت چرخ

See Section 2.5.1 for device-specific requirements.

7.3.11.5. ترمز دستی

See Section 2.5.1 for device-specific requirements.

7.3.12. سنسور پوز

پیاده سازی دستگاه:

  • MAY support pose sensor with 6 degrees of freedom.

If device implementations support pose sensor with 6 degrees of freedom, they:

  • [C-1-1] MUST implement and report TYPE_POSE_6DOF sensor.
  • [C-1-2] MUST be more accurate than the rotation vector alone.

7.4. اتصال داده

7.4.1. تلفن

“Telephony” as used by the Android APIs and this document refers specifically to hardware related to placing voice calls and sending SMS messages via a GSM or CDMA network. While these voice calls may or may not be packet-switched, they are for the purposes of Android considered independent of any data connectivity that may be implemented using the same network. In other words, the Android “telephony” functionality and APIs refer specifically to voice calls and SMS. For instance, device implementations that cannot place calls or send/receive SMS messages are not considered a telephony device, regardless of whether they use a cellular network for data connectivity.

  • Android MAY be used on devices that do not include telephony hardware. That is, Android is compatible with devices that are not phones.

If device implementations include GSM or CDMA telephony, they:

  • [C-1-1] MUST declare the android.hardware.telephony feature flag and other sub-feature flags according to the technology.
  • [C-1-2] MUST implement full support for the API for that technology.

If device implementations do not include telephony hardware, they:

  • [C-2-1] MUST implement the full APIs as no-ops.
7.4.1.1. سازگاری با مسدود کردن شماره

If device implementations report the android.hardware.telephony feature , they:

  • [C-1-1] MUST include number blocking support
  • [C-1-2] MUST fully implement BlockedNumberContract and the corresponding API as described in the SDK documentation.
  • [C-1-3] MUST block all calls and messages from a phone number in 'BlockedNumberProvider' without any interaction with apps. The only exception is when number blocking is temporarily lifted as described in the SDK documentation.
  • [C-1-4] MUST NOT write to the platform call log provider for a blocked call.
  • [C-1-5] MUST NOT write to the Telephony provider for a blocked message.
  • [C-1-6] MUST implement a blocked numbers management UI, which is opened with the intent returned by TelecomManager.createManageBlockedNumbersIntent() method.
  • [C-1-7] MUST NOT allow secondary users to view or edit the blocked numbers on the device as the Android platform assumes the primary user to have full control of the telephony services, a single instance, on the device. All blocking related UI MUST be hidden for secondary users and the blocked list MUST still be respected.
  • SHOULD migrate the blocked numbers into the provider when a device updates to Android 7.0.
7.4.1.2. Telecom API

If device implementations report android.hardware.telephony , they:

  • [C-1-1] MUST support the ConnectionService APIs described in the SDK .
  • [C-1-2] MUST display a new incoming call and provide user affordance to accept or reject the incoming call when the user is on an ongoing call that is made by a third-party app that does not support the hold feature specified via CAPABILITY_SUPPORT_HOLD .
  • [C-SR] Are STRONGLY RECOMMENDED to notify the user that answering an incoming call will drop an ongoing call.

    The AOSP implementation meets these requirements by a heads-up notification which indicates to the user that answering an incoming call will cause the other call to be dropped.

  • [C-SR] Are STRONGLY RECOMMENDED to preload the default dialer app that shows a call log entry and the name of a third-party app in its call log when the third-party app sets the EXTRA_LOG_SELF_MANAGED_CALLS extras key on its PhoneAccount to true .

  • [C-SR] Are STRONGLY RECOMMENDED to handle the audio headset's KEYCODE_MEDIA_PLAY_PAUSE and KEYCODE_HEADSETHOOK events for the android.telecom APIs as below:

7.4.2. IEEE 802.11 (Wi-Fi)

پیاده سازی دستگاه:

  • SHOULD include support for one or more forms of 802.11.

If device implementations include support for 802.11 and expose the functionality to a third-party application, they:

  • [C-1-1] MUST implement the corresponding Android API.
  • [C-1-2] MUST report the hardware feature flag android.hardware.wifi .
  • [C-1-3] MUST implement the multicast API as described in the SDK documentation.
  • [C-1-4] MUST support multicast DNS (mDNS) and MUST NOT filter mDNS packets (224.0.0.251) at any time of operation including:
    • Even when the screen is not in an active state.
    • For Android Television device implementations, even when in standby power states.
  • [C-1-5] MUST NOT treat the WifiManager.enableNetwork() API method call as a sufficient indication to switch the currently active Network that is used by default for application traffic and is returned by ConnectivityManager API methods such as getActiveNetwork and registerDefaultNetworkCallback . In other words, they MAY only disable the Internet access provided by any other network provider (eg mobile data) if they successfully validate that the Wi-Fi network is providing Internet access.
  • [C-SR] Are STRONGLY RECOMMENDED, when the ConnectivityManager.reportNetworkConnectivity() API method is called, to re-evaluate the Internet access on the Network and, once the evaluation determines that the current Network no longer provides Internet access, switch to any other available network (eg mobile data) that provides Internet access.
  • [C-SR] Are STRONGLY RECOMMENDED to randomize the source MAC address and sequence number of probe request frames, once at the beginning of each scan, while STA is disconnected.
    • Each group of probe request frames comprising one scan should use one consistent MAC address (SHOULD NOT randomize MAC address halfway through a scan).
    • Probe request sequence number should iterate as normal (sequentially) between the probe requests in a scan.
    • Probe request sequence number should randomize between the last probe request of a scan and the first probe request of the next scan.
  • [C-SR] Are STRONGLY RECOMMENDED, while STA is disconnected, to allow only the following elements in probe request frames:
    • SSID Parameter Set (0)
    • DS Parameter Set (3)

If device implementations support Wi-Fi and use Wi-Fi for location scanning, they:

7.4.2.1. ارتباط مستقیم به کمک وای - فای

پیاده سازی دستگاه:

  • SHOULD include support for Wi-Fi Direct (Wi-Fi peer-to-peer).

If device implementations include support for Wi-Fi Direct, they:

  • [C-1-1] MUST implement the corresponding Android API as described in the SDK documentation.
  • [C-1-2] MUST report the hardware feature android.hardware.wifi.direct .
  • [C-1-3] MUST support regular Wi-Fi operation.
  • [C-1-4] MUST support Wi-Fi and Wi-Fi Direct operations concurrently.

پیاده سازی دستگاه:

If device implementations include support for TDLS and TDLS is enabled by the WiFiManager API, they:

  • [C-1-1] MUST declare support for TDLS through WifiManager.isTdlsSupported .
  • SHOULD use TDLS only when it is possible AND beneficial.
  • SHOULD have some heuristic and NOT use TDLS when its performance might be worse than going through the Wi-Fi access point.
7.4.2.3. Wi-Fi Aware

پیاده سازی دستگاه:

If device implementations include support for Wi-Fi Aware and expose the functionality to third-party apps, then they:

  • [C-1-1] MUST implement the WifiAwareManager APIs as described in the SDK documentation .
  • [C-1-2] MUST declare the android.hardware.wifi.aware feature flag.
  • [C-1-3] MUST support Wi-Fi and Wi-Fi Aware operations concurrently.
  • [C-1-4] MUST randomize the Wi-Fi Aware management interface address at intervals no longer than 30 minutes and whenever Wi-Fi Aware is enabled.

If device implementations include support for Wi-Fi Aware and Wi-Fi Location as described in Section 7.4.2.5 and exposes these functionalities to third-party apps, then they:

7.4.2.4. رمز عبور وای فای

پیاده سازی دستگاه:

If device implementations include support for Wi-Fi Passpoint, they:

  • [C-1-1] MUST implement the Passpoint related WifiManager APIs as described in the SDK documentation .
  • [C-1-2] MUST support IEEE 802.11u standard, specifically related to Network Discovery and Selection, such as Generic Advertisement Service (GAS) and Access Network Query Protocol (ANQP).

Conversely if device implementations do not include support for Wi-Fi Passpoint:

  • [C-2-1] The implementation of the Passpoint related WifiManager APIs MUST throw an UnsupportedOperationException .
7.4.2.5. Wi-Fi Location (Wi-Fi Round Trip Time - RTT)

پیاده سازی دستگاه:

If device implementations include support for Wi-Fi Location and expose the functionality to third-party apps, then they:

  • [C-1-1] MUST implement the WifiRttManager APIs as described in the SDK documentation .
  • [C-1-2] MUST declare the android.hardware.wifi.rtt feature flag.
  • [C-1-3] MUST randomize the source MAC address for each RTT burst which is executed while the Wi-Fi interface on which the RTT is being executed is not associated to an Access Point.

7.4.3. بلوتوث

If device implementations support Bluetooth Audio profile, they:

  • SHOULD support Advanced Audio Codecs and Bluetooth Audio Codecs (eg LDAC).

If device implementations support HFP, A2DP and AVRCP, they:

  • SHOULD support at least 5 total connected devices.

If device implementations declare android.hardware.vr.high_performance feature, they:

  • [C-1-1] MUST support Bluetooth 4.2 and Bluetooth LE Data Length Extension.

Android includes support for Bluetooth and Bluetooth Low Energy .

If device implementations include support for Bluetooth and Bluetooth Low Energy, they:

  • [C-2-1] MUST declare the relevant platform features ( android.hardware.bluetooth and android.hardware.bluetooth_le respectively) and implement the platform APIs.
  • SHOULD implement relevant Bluetooth profiles such as A2DP, AVRCP, OBEX, HFP, etc. as appropriate for the device.

If device implementations include support for Bluetooth Low Energy, they:

  • [C-3-1] MUST declare the hardware feature android.hardware.bluetooth_le .
  • [C-3-2] MUST enable the GATT (generic attribute profile) based Bluetooth APIs as described in the SDK documentation and android.bluetooth .
  • [C-3-3] MUST report the correct value for BluetoothAdapter.isOffloadedFilteringSupported() to indicate whether the filtering logic for the ScanFilter API classes is implemented.
  • [C-3-4] MUST report the correct value for BluetoothAdapter.isMultipleAdvertisementSupported() to indicate whether Low Energy Advertising is supported.
  • SHOULD support offloading of the filtering logic to the bluetooth chipset when implementing the ScanFilter API .
  • SHOULD support offloading of the batched scanning to the bluetooth chipset.
  • SHOULD support multi advertisement with at least 4 slots.

  • [SR] STRONGLY RECOMMENDED to implement a Resolvable Private Address (RPA) timeout no longer than 15 minutes and rotate the address at timeout to protect user privacy.

If device implementations support Bluetooth LE and use Bluetooth LE for location scanning, they:

  • [C-4-1] MUST provide a user affordance to enable/disable the value read through the System API BluetoothAdapter.isBleScanAlwaysAvailable() .

7.4.4. ارتباطات میدان نزدیک

پیاده سازی دستگاه:

  • SHOULD include a transceiver and related hardware for Near-Field Communications (NFC).
  • [C-0-1] MUST implement android.nfc.NdefMessage and android.nfc.NdefRecord APIs even if they do not include support for NFC or declare the android.hardware.nfc feature as the classes represent a protocol-independent data representation format .

If device implementations include NFC hardware and plan to make it available to third-party apps, they:

  • [C-1-1] MUST report the android.hardware.nfc feature from the android.content.pm.PackageManager.hasSystemFeature() method .
  • MUST be capable of reading and writing NDEF messages via the following NFC standards as below:
  • [C-1-2] MUST be capable of acting as an NFC Forum reader/writer (as defined by the NFC Forum technical specification NFCForum-TS-DigitalProtocol-1.0) via the following NFC standards:
    • NfcA (ISO14443-3A)
    • NfcB (ISO14443-3B)
    • NfcF (JIS X 6319-4)
    • IsoDep (ISO 14443-4)
    • NFC Forum Tag Types 1, 2, 3, 4, 5 (defined by the NFC Forum)
  • [SR] STRONGLY RECOMMENDED to be capable of reading and writing NDEF messages as well as raw data via the following NFC standards. Note that while the NFC standards are stated as STRONGLY RECOMMENDED, the Compatibility Definition for a future version is planned to change these to MUST. These standards are optional in this version but will be required in future versions. Existing and new devices that run this version of Android are very strongly encouraged to meet these requirements now so they will be able to upgrade to the future platform releases.

  • [C-1-3] MUST be capable of transmitting and receiving data via the following peer-to-peer standards and protocols:

    • ISO 18092
    • LLCP 1.2 (defined by the NFC Forum)
    • SDP 1.0 (defined by the NFC Forum)
    • NDEF Push Protocol
    • SNEP 1.0 (defined by the NFC Forum)
  • [C-1-4] MUST include support for Android Beam and SHOULD enable Android Beam by default.
  • [C-1-5] MUST be able to send and receive using Android Beam, when Android Beam is enabled or another proprietary NFC P2p mode is turned on.
  • [C-1-6] MUST implement the SNEP default server. Valid NDEF messages received by the default SNEP server MUST be dispatched to applications using the android.nfc.ACTION_NDEF_DISCOVERED intent. Disabling Android Beam in settings MUST NOT disable dispatch of incoming NDEF message.
  • [C-1-7] MUST honor the android.settings.NFCSHARING_SETTINGS intent to show NFC sharing settings .
  • [C-1-8] MUST implement the NPP server. Messages received by the NPP server MUST be processed the same way as the SNEP default server.
  • [C-1-9] MUST implement a SNEP client and attempt to send outbound P2P NDEF to the default SNEP server when Android Beam is enabled. If no default SNEP server is found then the client MUST attempt to send to an NPP server.
  • [C-1-10] MUST allow foreground activities to set the outbound P2P NDEF message using android.nfc.NfcAdapter.setNdefPushMessage , and android.nfc.NfcAdapter.setNdefPushMessageCallback , and android.nfc.NfcAdapter.enableForegroundNdefPush .
  • SHOULD use a gesture or on-screen confirmation, such as 'Touch to Beam', before sending outbound P2P NDEF messages.
  • [C-1-11] MUST support NFC Connection handover to Bluetooth when the device supports Bluetooth Object Push Profile.
  • [C-1-12] MUST support connection handover to Bluetooth when using android.nfc.NfcAdapter.setBeamPushUris , by implementing the “ Connection Handover version 1.2 ” and “ Bluetooth Secure Simple Pairing Using NFC version 1.0 ” specs from the NFC Forum. Such an implementation MUST implement the handover LLCP service with service name “urn:nfc:sn:handover” for exchanging the handover request/select records over NFC, and it MUST use the Bluetooth Object Push Profile for the actual Bluetooth data transfer. For legacy reasons (to remain compatible with Android 4.1 devices), the implementation SHOULD still accept SNEP GET requests for exchanging the handover request/select records over NFC. However an implementation itself SHOULD NOT send SNEP GET requests for performing connection handover.
  • [C-1-13] MUST poll for all supported technologies while in NFC discovery mode.
  • SHOULD be in NFC discovery mode while the device is awake with the screen active and the lock-screen unlocked.
  • SHOULD be capable of reading the barcode and URL (if encoded) of Thinfilm NFC Barcode products.

Note that publicly available links are not available for the JIS, ISO, and NFC Forum specifications cited above.

Android includes support for NFC Host Card Emulation (HCE) mode.

If device implementations include an NFC controller chipset capable of HCE (for NfcA and/or NfcB) and support Application ID (AID) routing, they:

  • [C-2-1] MUST report the android.hardware.nfc.hce feature constant.
  • [C-2-2] MUST support NFC HCE APIs as defined in the Android SDK.

If device implementations include an NFC controller chipset capable of HCE for NfcF, and implement the feature for third-party applications, they:

  • [C-3-1] MUST report the android.hardware.nfc.hcef feature constant.
  • [C-3-2] MUST implement the NfcF Card Emulation APIs as defined in the Android SDK.

If device implementations include general NFC support as described in this section and support MIFARE technologies (MIFARE Classic, MIFARE Ultralight, NDEF on MIFARE Classic) in the reader/writer role, they:

  • [C-4-1] MUST implement the corresponding Android APIs as documented by the Android SDK.
  • [C-4-2] MUST report the feature com.nxp.mifare from the android.content.pm.PackageManager.hasSystemFeature () method. Note that this is not a standard Android feature and as such does not appear as a constant in the android.content.pm.PackageManager class.

7.4.5. حداقل قابلیت شبکه

پیاده سازی دستگاه:

  • [C-0-1] MUST include support for one or more forms of data networking. Specifically, device implementations MUST include support for at least one data standard capable of 200 Kbit/sec or greater. Examples of technologies that satisfy this requirement include EDGE, HSPA, EV-DO, 802.11g, Ethernet and Bluetooth PAN.
  • SHOULD also include support for at least one common wireless data standard, such as 802.11 (Wi-Fi), when a physical networking standard (such as Ethernet) is the primary data connection.
  • MAY implement more than one form of data connectivity.
  • [C-0-2] MUST include an IPv6 networking stack and support IPv6 communication using the managed APIs, such as java.net.Socket and java.net.URLConnection , as well as the native APIs, such as AF_INET6 sockets.
  • [C-0-3] MUST enable IPv6 by default.
  • MUST ensure that IPv6 communication is as reliable as IPv4, for example:
    • [C-0-4] MUST maintain IPv6 connectivity in doze mode.
    • [C-0-5] Rate-limiting MUST NOT cause the device to lose IPv6 connectivity on any IPv6-compliant network that uses RA lifetimes of at least 180 seconds.
  • [C-0-6] MUST provide third-party applications with direct IPv6 connectivity to the network when connected to an IPv6 network, without any form of address or port translation happening locally on the device. Both managed APIs such as Socket#getLocalAddress or Socket#getLocalPort ) and NDK APIs such as getsockname() or IPV6_PKTINFO MUST return the IP address and port that is actually used to send and receive packets on the network.

The required level of IPv6 support depends on the network type, as shown in the following requirements.

If device implementations support Wi-Fi, they:

  • [C-1-1] MUST support dual-stack and IPv6-only operation on Wi-Fi.

If device implementations support Ethernet, they:

  • [C-2-1] MUST support dual-stack operation on Ethernet.

If device implementations support Cellular data, they:

  • SHOULD support IPv6 operation (IPv6-only and possibly dual-stack) on cellular.

If device implementations support more than one network type (eg, Wi-Fi and cellular data), they:

  • [C-3-1] MUST simultaneously meet the above requirements on each network when the device is simultaneously connected to more than one network type.

7.4.6. تنظیمات همگام سازی

پیاده سازی دستگاه:

7.4.7. ذخیره داده

If device implementations include a metered connection, they are:

  • [SR] STRONGLY RECOMMENDED to provide the data saver mode.

If device implementations provide the data saver mode, they:

If device implementations do not provide the data saver mode, they:

  • [C-2-1] MUST return the value RESTRICT_BACKGROUND_STATUS_DISABLED for ConnectivityManager.getRestrictBackgroundStatus()
  • [C-2-2] MUST NOT broadcast ConnectivityManager.ACTION_RESTRICT_BACKGROUND_CHANGED .
  • [C-2-3] MUST have an activity that handles the Settings.ACTION_IGNORE_BACKGROUND_DATA_RESTRICTIONS_SETTINGS intent but MAY implement it as a no-op.

7.4.8. Secure Elements

If device implementations support Open Mobile API capable secure elements and make them available to 3rd-party apps, they:

7.5. دوربین ها

If device implementations include at least one camera, they:

  • [C-1-1] MUST declare the android.hardware.camera.any feature flag.
  • [C-1-2] MUST be possible for an application to simultaneously allocate 3 RGBA_8888 bitmaps equal to the size of the images produced by the largest-resolution camera sensor on the device, while camera is open for the purpose of basic preview and still گرفتن.

7.5.1. دوربین عقب

A rear-facing camera is a camera located on the side of the device opposite the display; that is, it images scenes on the far side of the device, like a traditional camera.

پیاده سازی دستگاه:

  • SHOULD include a rear-facing camera.

If device implementations include at least one rear-facing camera, they:

  • [C-1-1] MUST report the feature flag android.hardware.camera and android.hardware.camera.any .
  • [C-1-2] MUST have a resolution of at least 2 megapixels.
  • SHOULD have either hardware auto-focus or software auto-focus implemented in the camera driver (transparent to application software).
  • MAY have fixed-focus or EDOF (extended depth of field) hardware.
  • MAY include a flash.

If the camera includes a flash:

  • [C-2-1] the flash lamp MUST NOT be lit while an android.hardware.Camera.PreviewCallback instance has been registered on a Camera preview surface, unless the application has explicitly enabled the flash by enabling the FLASH_MODE_AUTO or FLASH_MODE_ON attributes of a Camera.Parameters object. Note that this constraint does not apply to the device's built-in system camera application, but only to third-party applications using Camera.PreviewCallback .

7.5.2. دوربین جلو

A front-facing camera is a camera located on the same side of the device as the display; that is, a camera typically used to image the user, such as for video conferencing and similar applications.

پیاده سازی دستگاه:

  • MAY include a front-facing camera.

If device implementations include at least one front-facing camera, they:

  • [C-1-1] MUST report the feature flag android.hardware.camera.any and android.hardware.camera.front .
  • [C-1-2] MUST have a resolution of at least VGA (640x480 pixels).
  • [C-1-3] MUST NOT use a front-facing camera as the default for the Camera API and MUST NOT configure the API to treat a front-facing camera as the default rear-facing camera, even if it is the only camera روی دستگاه
  • [C-1-4] The camera preview MUST be mirrored horizontally relative to the orientation specified by the application when the current application has explicitly requested that the Camera display be rotated via a call to the android.hardware.Camera.setDisplayOrientation() method . Conversely, the preview MUST be mirrored along the device's default horizontal axis when the current application does not explicitly request that the Camera display be rotated via a call to the android.hardware.Camera.setDisplayOrientation() method.
  • [C-1-5] MUST NOT mirror the final captured still image or video streams returned to application callbacks or committed to media storage.
  • [C-1-6] MUST mirror the image displayed by the postview in the same manner as the camera preview image stream.
  • MAY include features (such as auto-focus, flash, etc.) available to rear-facing cameras as described in section 7.5.1 .

If device implementations are capable of being rotated by user (such as automatically via an accelerometer or manually via user input):

  • [C-2-1] The camera preview MUST be mirrored horizontally relative to the device's current orientation.

7.5.3. دوربین خارجی

پیاده سازی دستگاه:

  • MAY include support for an external camera that is not necessarily always connected.

If device implementations include support for an external camera, they:

  • [C-1-1] MUST declare the platform feature flag android.hardware.camera.external and android.hardware camera.any .
  • [C-1-2] MUST support USB Video Class (UVC 1.0 or higher) if the external camera connects through the USB host port.
  • [C-1-3] MUST pass camera CTS tests with a physical external camera device connected. Details of camera CTS testing are available at source.android.com .
  • SHOULD support video compressions such as MJPEG to enable transfer of high-quality unencoded streams (ie raw or independently compressed picture streams).
  • MAY support multiple cameras.
  • MAY support camera-based video encoding.

If camera-based video encoding is supported:

  • [C-2-1] A simultaneous unencoded / MJPEG stream (QVGA or greater resolution) MUST be accessible to the device implementation.

7.5.4. رفتار API دوربین

Android includes two API packages to access the camera, the newer android.hardware.camera2 API expose lower-level camera control to the app, including efficient zero-copy burst/streaming flows and per-frame controls of exposure, gain, white balance gains, color conversion, denoising, sharpening, and more.

The older API package, android.hardware.Camera , is marked as deprecated in Android 5.0 but as it should still be available for apps to use. Android device implementations MUST ensure the continued support of the API as described in this section and in the Android SDK.

All features that are common between the deprecated android.hardware.Camera class and the newer android.hardware.camera2 package MUST have equivalent performance and quality in both APIs. For example, with equivalent settings, autofocus speed and accuracy must be identical, and the quality of captured images must be the same. Features that depend on the different semantics of the two APIs are not required to have matching speed or quality, but SHOULD match as closely as possible.

Device implementations MUST implement the following behaviors for the camera-related APIs, for all available cameras. پیاده سازی دستگاه:

  • [C-0-1] MUST use android.hardware.PixelFormat.YCbCr_420_SP for preview data provided to application callbacks when an application has never called android.hardware.Camera.Parameters.setPreviewFormat(int) .
  • [C-0-2] MUST further be in the NV21 encoding format when an application registers an android.hardware.Camera.PreviewCallback instance and the system calls the onPreviewFrame() method and the preview format is YCbCr_420_SP, the data in the byte[] passed into onPreviewFrame() . That is, NV21 MUST be the default.
  • [C-0-3] MUST support the YV12 format (as denoted by the android.graphics.ImageFormat.YV12 constant) for camera previews for both front- and rear-facing cameras for android.hardware.Camera . (The hardware video encoder and camera may use any native pixel format, but the device implementation MUST support conversion to YV12.)
  • [C-0-4] MUST support the android.hardware.ImageFormat.YUV_420_888 and android.hardware.ImageFormat.JPEG formats as outputs through the android.media.ImageReader API for android.hardware.camera2 devices that advertise REQUEST_AVAILABLE_CAPABILITIES_BACKWARD_COMPATIBLE capability in android.request.availableCapabilities .
  • [C-0-5] MUST still implement the full Camera API included in the Android SDK documentation, regardless of whether the device includes hardware autofocus or other capabilities. For instance, cameras that lack autofocus MUST still call any registered android.hardware.Camera.AutoFocusCallback instances (even though this has no relevance to a non-autofocus camera.) Note that this does apply to front-facing cameras; for instance, even though most front-facing cameras do not support autofocus, the API callbacks must still be “faked” as described.
  • [C-0-6] MUST recognize and honor each parameter name defined as a constant on the android.hardware.Camera.Parameters class. Conversely, device implementations MUST NOT honor or recognize string constants passed to the android.hardware.Camera.setParameters() method other than those documented as constants on the android.hardware.Camera.Parameters . That is, device implementations MUST support all standard Camera parameters if the hardware allows, and MUST NOT support custom Camera parameter types. For instance, device implementations that support image capture using high dynamic range (HDR) imaging techniques MUST support camera parameter Camera.SCENE_MODE_HDR .
  • [C-0-7] MUST report the proper level of support with the android.info.supportedHardwareLevel property as described in the Android SDK and report the appropriate framework feature flags .
  • [C-0-8] MUST also declare its individual camera capabilities of android.hardware.camera2 via the android.request.availableCapabilities property and declare the appropriate feature flags ; MUST define the feature flag if any of its attached camera devices supports the feature.
  • [C-0-9] MUST broadcast the Camera.ACTION_NEW_PICTURE intent whenever a new picture is taken by the camera and the entry of the picture has been added to the media store.
  • [C-0-10] MUST broadcast the Camera.ACTION_NEW_VIDEO intent whenever a new video is recorded by the camera and the entry of the picture has been added to the media store.
  • [C-SR] Are STRONGLY RECOMMENDED to support a logical camera device that lists capability CameraMetadata.REQUEST_AVAILABLE_CAPABILITIES_LOGICAL_MULTI_CAMERA , for devices with multiple cameras facing the same direction, consisting of each physical camera facing that direction, as long as the physical camera type is supported by the framework and CameraCharacteristics.INFO_SUPPORTED_HARDWARE_LEVEL for the physical cameras is either LIMITED , FULL , or LEVEL_3 .

7.5.5. جهت گیری دوربین

If device implementations have a front- or a rear-facing camera, such camera(s):

  • [C-1-1] MUST be oriented so that the long dimension of the camera aligns with the screen's long dimension. That is, when the device is held in the landscape orientation, cameras MUST capture images in the landscape orientation. This applies regardless of the device's natural orientation; that is, it applies to landscape-primary devices as well as portrait-primary devices.

7.6. حافظه و ذخیره سازی

7.6.1. حداقل حافظه و ذخیره سازی

پیاده سازی دستگاه:

  • [C-0-1] MUST include a Download Manager that applications MAY use to download data files and they MUST be capable of downloading individual files of at least 100MB in size to the default “cache” location.

7.6.2. برنامه ذخیره سازی مشترک

پیاده سازی دستگاه:

  • [C-0-1] MUST offer storage to be shared by applications, also often referred as “shared external storage”, "application shared storage" or by the Linux path "/sdcard" it is mounted on.
  • [C-0-2] MUST be configured with shared storage mounted by default, in other words “out of the box”, regardless of whether the storage is implemented on an internal storage component or a removable storage medium (eg Secure Digital card slot ).
  • [C-0-3] MUST mount the application shared storage directly on the Linux path sdcard or include a Linux symbolic link from sdcard to the actual mount point.
  • [C-0-4] MUST enforce the android.permission.WRITE_EXTERNAL_STORAGE permission on this shared storage as documented in the SDK. Shared storage MUST otherwise be writable by any application that obtains that permission.

Device implementations MAY meet the above requirements using either of the following:

  • User-accessible removable storage, such as a Secure Digital (SD) card slot.
  • A portion of the internal (non-removable) storage as implemented in the Android Open Source Project (AOSP).

If device implementations use removable storage to satisfy the above requirements, they:

  • [C-1-1] MUST implement a toast or pop-up user interface warning the user when there is no storage medium inserted in the slot.
  • [C-1-2] MUST include a FAT-formatted storage medium (eg SD card) or show on the box and other material available at time of purchase that the storage medium has to be purchased separately.

If device implementations use a portion of the non-removable storage to satisfy the above requirements, they:

  • SHOULD use the AOSP implementation of the internal application shared storage.
  • MAY share the storage space with the application private data.

If device implementations include multiple shared storage paths (such as both an SD card slot and shared internal storage), they:

  • [C-2-1] MUST allow only preinstalled and privileged Android applications with the WRITE_EXTERNAL_STORAGE permission to write to the secondary external storage, except when writing to their package-specific directories or within the URI returned by firing the ACTION_OPEN_DOCUMENT_TREE intent.

If device implementations have a USB port with USB peripheral mode support, they:

  • [C-3-1] MUST provide a mechanism to access the data on the application shared storage from a host computer.
  • SHOULD expose content from both storage paths transparently through Android's media scanner service and android.provider.MediaStore .
  • MAY use USB mass storage, but SHOULD use Media Transfer Protocol to satisfy this requirement.

If device implementations have a USB port with USB peripheral mode and support Media Transfer Protocol, they:

  • SHOULD be compatible with the reference Android MTP host, Android File Transfer .
  • SHOULD report a USB device class of 0x00.
  • SHOULD report a USB interface name of 'MTP'.

7.6.3. ذخیره سازی قابل قبول

If the device is expected to be mobile in nature unlike Television, device implementations are:

  • [SR] STRONGLY RECOMMENDED to implement the adoptable storage in a long-term stable location, since accidentally disconnecting them can cause data loss/corruption.

If the removable storage device port is in a long-term stable location, such as within the battery compartment or other protective cover, device implementations are:

7.7. یو اس بی

If device implementations have a USB port, they:

  • SHOULD support USB peripheral mode and SHOULD support USB host mode.

7.7.1. حالت جانبی USB

If device implementations include a USB port supporting peripheral mode:

  • [C-1-1] The port MUST be connectable to a USB host that has a standard type-A or type-C USB port.
  • [C-1-2] MUST report the correct value of iSerialNumber in USB standard device descriptor through android.os.Build.SERIAL .
  • [C-1-3] MUST detect 1.5A and 3.0A chargers per the Type-C resistor standard and MUST detect changes in the advertisement if they support Type-C USB.
  • [SR] The port SHOULD use micro-B, micro-AB or Type-C USB form factor. Existing and new Android devices are STRONGLY RECOMMENDED to meet these requirements so they will be able to upgrade to the future platform releases.
  • [SR] The port SHOULD be located on the bottom of the device (according to natural orientation) or enable software screen rotation for all apps (including home screen), so that the display draws correctly when the device is oriented with the port at bottom . Existing and new Android devices are STRONGLY RECOMMENDED to meet these requirements so they will be able to upgrade to future platform releases.
  • [SR] SHOULD implement support to draw 1.5 A current during HS chirp and traffic as specified in the USB Battery Charging specification, revision 1.2 . Existing and new Android devices are STRONGLY RECOMMENDED to meet these requirements so they will be able to upgrade to the future platform releases.
  • [SR] STRONGLY RECOMMENDED to not support proprietary charging methods that modify Vbus voltage beyond default levels, or alter sink/source roles as such may result in interoperability issues with the chargers or devices that support the standard USB Power Delivery methods. While this is called out as "STRONGLY RECOMMENDED", in future Android versions we might REQUIRE all type-C devices to support full interoperability with standard type-C chargers.
  • [SR] STRONGLY RECOMMENDED to support Power Delivery for data and power role swapping when they support Type-C USB and USB host mode.
  • SHOULD support Power Delivery for high-voltage charging and support for Alternate Modes such as display out.
  • SHOULD implement the Android Open Accessory (AOA) API and specification as documented in the Android SDK documentation.

If device implementations include a USB port and implement the AOA specification, they:

  • [C-2-1] MUST declare support for the hardware feature android.hardware.usb.accessory .
  • [C-2-2] The USB mass storage class MUST include the string "android" at the end of the interface description iInterface string of the USB mass storage
  • SHOULD NOT implement AOAv2 audio documented in the Android Open Accessory Protocol 2.0 documentation. AOAv2 audio is deprecated as of Android version 8.0 (API level 26).

7.7.2. حالت میزبان USB

If device implementations include a USB port supporting host mode, they:

  • [C-1-1] MUST implement the Android USB host API as documented in the Android SDK and MUST declare support for the hardware feature android.hardware.usb.host .
  • [C-1-2] MUST implement support to connect standard USB peripherals, in other words, they MUST either:
    • Have an on-device type C port or ship with cable(s) adapting an on-device proprietary port to a standard USB type-C port (USB Type-C device).
    • Have an on-device type A or ship with cable(s) adapting an on-device proprietary port to a standard USB type-A port.
    • Have an on-device micro-AB port, which SHOULD ship with a cable adapting to a standard type-A port.
  • [C-1-3] MUST NOT ship with an adapter converting from USB type A or micro-AB ports to a type-C port (receptacle).
  • [SR] STRONGLY RECOMMENDED to implement the USB audio class as documented in the Android SDK documentation.
  • SHOULD support charging the connected USB peripheral device while in host mode; advertising a source current of at least 1.5A as specified in the Termination Parameters section of the USB Type-C Cable and Connector Specification Revision 1.2 for USB Type-C connectors or using Charging Downstream Port(CDP) output current range as specified in the USB Battery Charging specifications, revision 1.2 for Micro-AB connectors.
  • SHOULD implement and support USB Type-C standards.

If device implementations include a USB port supporting host mode and the USB audio class, they:

  • [C-2-1] MUST support the USB HID class .
  • [C-2-2] MUST support the detection and mapping of the following HID data fields specified in the USB HID Usage Tables and the Voice Command Usage Request to the KeyEvent constants as below:
    • Usage Page (0xC) Usage ID (0x0CD): KEYCODE_MEDIA_PLAY_PAUSE
    • Usage Page (0xC) Usage ID (0x0E9): KEYCODE_VOLUME_UP
    • Usage Page (0xC) Usage ID (0x0EA): KEYCODE_VOLUME_DOWN
    • Usage Page (0xC) Usage ID (0x0CF): KEYCODE_VOICE_ASSIST

If device implementations include a USB port supporting host mode and the Storage Access Framework (SAF), they:

  • [C-3-1] MUST recognize any remotely connected MTP (Media Transfer Protocol) devices and make their contents accessible through the ACTION_GET_CONTENT , ACTION_OPEN_DOCUMENT , and ACTION_CREATE_DOCUMENT intents. .

If device implementations include a USB port supporting host mode and USB Type-C, they:

  • [C-4-1] MUST implement Dual Role Port functionality as defined by the USB Type-C specification (section 4.5.1.3.3).
  • [SR] STRONGLY RECOMMENDED to support DisplayPort, SHOULD support USB SuperSpeed Data Rates, and are STRONGLY RECOMMENDED to support Power Delivery for data and power role swapping.
  • [SR] STRONGLY RECOMMENDED to NOT support Audio Adapter Accessory Mode as described in the Appendix A of the USB Type-C Cable and Connector Specification Revision 1.2 .
  • SHOULD implement the Try.* model that is most appropriate for the device form factor. For example a handheld device SHOULD implement the Try.SNK model.

7.8. سمعی

7.8.1. میکروفون

If device implementations include a microphone, they:

  • [C-1-1] MUST report the android.hardware.microphone feature constant.
  • [C-1-2] MUST meet the audio recording requirements in section 5.4 .
  • [C-1-3] MUST meet the audio latency requirements in section 5.6 .
  • [SR] Are STRONGLY RECOMMENDED to support near-ultrasound recording as described in section 7.8.3 .

If device implementations omit a microphone, they:

  • [C-2-1] MUST NOT report the android.hardware.microphone feature constant.
  • [C-2-2] MUST implement the audio recording API at least as no-ops, per section 7 .

7.8.2. خروجی صدا

If device implementations include a speaker or an audio/multimedia output port for an audio output peripheral such as a 4 conductor 3.5mm audio jack or USB host mode port using USB audio class , they:

  • [C-1-1] MUST report the android.hardware.audio.output feature constant.
  • [C-1-2] MUST meet the audio playback requirements in section 5.5 .
  • [C-1-3] MUST meet the audio latency requirements in section 5.6 .
  • [SR] STRONGLY RECOMMENDED to support near-ultrasound playback as described in section 7.8.3 .

If device implementations do not include a speaker or audio output port, they:

  • [C-2-1] MUST NOT report the android.hardware.audio.output feature.
  • [C-2-2] MUST implement the Audio Output related APIs as no-ops at least.

For the purposes of this section, an "output port" is a physical interface such as a 3.5mm audio jack, HDMI, or USB host mode port with USB audio class. Support for audio output over radio-based protocols such as Bluetooth, WiFi, or cellular network does not qualify as including an "output port".

7.8.2.1. پورت های صوتی آنالوگ

In order to be compatible with the headsets and other audio accessories using the 3.5mm audio plug across the Android ecosystem, if device implementations include one or more analog audio ports, they:

  • [C-SR] Are STRONGLY RECOMMENDED to include at least one of the audio port(s) to be a 4 conductor 3.5mm audio jack.

If device implementations have a 4 conductor 3.5mm audio jack, they:

  • [C-1-1] MUST support audio playback to stereo headphones and stereo headsets with a microphone.
  • [C-1-2] MUST support TRRS audio plugs with the CTIA pin-out order.
  • [C-1-3] MUST support the detection and mapping to the keycodes for the following 3 ranges of equivalent impedance between the microphone and ground conductors on the audio plug:
    • 70 ohm or less : KEYCODE_HEADSETHOOK
    • 210-290 ohm : KEYCODE_VOLUME_UP
    • 360-680 ohm : KEYCODE_VOLUME_DOWN
  • [C-1-4] MUST trigger ACTION_HEADSET_PLUG upon a plug insert, but only after all contacts on plug are touching their relevant segments on the jack.
  • [C-1-5] MUST be capable of driving at least 150mV ± 10% of output voltage on a 32 ohm speaker impedance.
  • [C-1-6] MUST have a microphone bias voltage between 1.8V ~ 2.9V.
  • [C-1-7] MUST detect and map to the keycode for the following range of equivalent impedance between the microphone and ground conductors on the audio plug:
    • 110-180 ohm: KEYCODE_VOICE_ASSIST
  • [C-SR] Are STRONGLY RECOMMENDED to support audio plugs with the OMTP pin-out order.
  • [C-SR] Are STRONGLY RECOMMEND to support audio recording from stereo headsets with a microphone.

If device implementations have a 4 conductor 3.5mm audio jack and support a microphone, and broadcast the android.intent.action.HEADSET_PLUG with the extra value microphone set as 1, they:

  • [C-2-1] MUST support the detection of microphone on the plugged in audio accessory.

7.8.3. سونوگرافی نزدیک

Near-Ultrasound audio is the 18.5 kHz to 20 kHz band.

پیاده سازی دستگاه:

If PROPERTY_SUPPORT_MIC_NEAR_ULTRASOUND is "true", the following requirements MUST be met by the VOICE_RECOGNITION and UNPROCESSED audio sources:

  • [C-1-1] The microphone's mean power response in the 18.5 kHz to 20 kHz band MUST be no more than 15 dB below the response at 2 kHz.
  • [C-1-2] The microphone's unweighted signal to noise ratio over 18.5 kHz to 20 kHz for a 19 kHz tone at -26 dBFS MUST be no lower than 50 dB.

If PROPERTY_SUPPORT_SPEAKER_NEAR_ULTRASOUND is "true":

  • [C-2-1] The speaker's mean response in 18.5 kHz - 20 kHz MUST be no lower than 40 dB below the response at 2 kHz.

7.9. واقعیت مجازی

Android includes APIs and facilities to build "Virtual Reality" (VR) applications including high quality mobile VR experiences. Device implementations MUST properly implement these APIs and behaviors, as detailed in this section.

7.9.1. حالت واقعیت مجازی

Android includes support for VR Mode , a feature which handles stereoscopic rendering of notifications and disables monocular system UI components while a VR application has user focus.

7.9.2. Virtual Reality Mode - High Performance

If device implementations support VR mode, they:

  • [C-1-1] MUST have at least 2 physical cores.
  • [C-1-2] MUST declare the android.hardware.vr.high_performance feature.
  • [C-1-3] MUST support sustained performance mode.
  • [C-1-4] MUST support OpenGL ES 3.2.
  • [C-1-5] MUST support android.hardware.vulkan.level 0.
  • SHOULD support android.hardware.vulkan.level 1 or higher.
  • [C-1-6] MUST implement EGL_KHR_mutable_render_buffer , EGL_ANDROID_front_buffer_auto_refresh , EGL_ANDROID_get_native_client_buffer , EGL_KHR_fence_sync , EGL_KHR_wait_sync , EGL_IMG_context_priority , EGL_EXT_protected_content , EGL_EXT_image_gl_colorspace , and expose the extensions in the list of available EGL extensions.
  • [C-1-8] MUST implement GL_EXT_multisampled_render_to_texture2 , GL_OVR_multiview , GL_OVR_multiview2 , GL_OVR_multiview_multisampled_render_to_texture , GL_EXT_protected_textures , and expose the extensions in the list of available GL extensions.
  • [C-SR] Are STRONGLY RECOMMENDED to implement GL_EXT_external_buffer , GL_EXT_EGL_image_array , and expose the extensions in the list of available GL extensions.
  • [C-SR] Are STRONGLY RECOMMENDED to support Vulkan 1.1.
  • [C-SR] Are STRONGLY RECOMMENDED to implement VK_ANDROID_external_memory_android_hardware_buffer , VK_GOOGLE_display_timing , VK_KHR_shared_presentable_image , and expose it in the list of available Vulkan extensions.
  • [C-SR] Are STRONGLY RECOMMENDED to expose at least one Vulkan queue family where flags contain both VK_QUEUE_GRAPHICS_BIT and VK_QUEUE_COMPUTE_BIT , and queueCount is at least 2.
  • [C-1-7] The GPU and display MUST be able to synchronize access to the shared front buffer such that alternating-eye rendering of VR content at 60fps with two render contexts will be displayed with no visible tearing artifacts.
  • [C-1-9] MUST implement support for AHardwareBuffer flags AHARDWAREBUFFER_USAGE_GPU_DATA_BUFFER , AHARDWAREBUFFER_USAGE_SENSOR_DIRECT_DATA and AHARDWAREBUFFER_USAGE_PROTECTED_CONTENT as described in the NDK.
  • [C-1-10] MUST implement support for AHardwareBuffer s with any combination of the usage flags AHARDWAREBUFFER_USAGE_GPU_COLOR_OUTPUT , AHARDWAREBUFFER_USAGE_GPU_SAMPLED_IMAGE , AHARDWAREBUFFER_USAGE_PROTECTED_CONTENT for at least the following formats: AHARDWAREBUFFER_FORMAT_R5G6B5_UNORM , AHARDWAREBUFFER_FORMAT_R8G8B8A8_UNORM , AHARDWAREBUFFER_FORMAT_R10G10B10A2_UNORM , AHARDWAREBUFFER_FORMAT_R16G16B16A16_FLOAT .
  • [C-SR] Are STRONGLY RECOMMENDED to support the allocation of AHardwareBuffer s with more than one layer and flags and formats specified in C-1-10.
  • [C-1-11] MUST support H.264 decoding at least 3840 x 2160 at 30fps, compressed to an average of 40Mbps (equivalent to 4 instances of 1920 x1080 at 30 fps-10 Mbps or 2 instances of 1920 x 1080 at 60 fps-20 Mbps).
  • [C-1-12] MUST support HEVC and VP9, MUST be capable of decoding at least 1920 x 1080 at 30 fps compressed to an average of 10 Mbps and SHOULD be capable of decoding 3840 x 2160 at 30 fps-20 Mbps (equivalent to 4 instances of 1920 x 1080 at 30 fps-5 Mbps).
  • [C-1-13] MUST support HardwarePropertiesManager.getDeviceTemperatures API and return accurate values for skin temperature.
  • [C-1-14] MUST have an embedded screen, and its resolution MUST be at least 1920 x 1080.
  • [C-SR] Are STRONGLY RECOMMENDED to have a display resolution of at least 2560 x 1440.
  • [C-1-15] The display MUST update at least 60 Hz while in VR Mode.
  • [C-1-17] The display MUST support a low-persistence mode with ≤ 5 milliseconds persistence, persistence being defined as the amount of time for which a pixel is emitting light.
  • [C-1-18] MUST support Bluetooth 4.2 and Bluetooth LE Data Length Extension section 7.4.3 .
  • [C-1-19] MUST support and properly report Direct Channel Type for all of the following default sensor types:
    • TYPE_ACCELEROMETER
    • TYPE_ACCELEROMETER_UNCALIBRATED
    • TYPE_GYROSCOPE
    • TYPE_GYROSCOPE_UNCALIBRATED
    • TYPE_MAGNETIC_FIELD
    • TYPE_MAGNETIC_FIELD_UNCALIBRATED
  • [C-SR] Are STRONGLY RECOMMENDED to support the TYPE_HARDWARE_BUFFER direct channel type for all Direct Channel Types listed above.
  • [C-1-21] MUST meet the gyroscope, accelerometer, and magnetometer related requirements for android.hardware.hifi_sensors , as specified in section 7.3.9 .
  • [C-SR] Are STRONGLY RECOMMENDED to support the android.hardware.sensor.hifi_sensors feature.
  • [C-1-22] MUST have end-to-end motion to photon latency not higher than 28 milliseconds.
  • [C-SR] Are STRONGLY RECOMMENDED to have end-to-end motion to photon latency not higher than 20 milliseconds.
  • [C-1-23] MUST have first-frame ratio, which is the ratio between the brightness of pixels on the first frame after a transition from black to white and the brightness of white pixels in steady state, of at least 85%.
  • [C-SR] Are STRONGLY RECOMMENDED to have first-frame ratio of at least 90%.
  • MAY provide an exclusive core to the foreground application and MAY support the Process.getExclusiveCores API to return the numbers of the cpu cores that are exclusive to the top foreground application.

If exclusive core is supported, then the core:

  • [C-2-1] MUST not allow any other userspace processes to run on it (except device drivers used by the application), but MAY allow some kernel processes to run as necessary.

8. عملکرد و قدرت

Some minimum performance and power criteria are critical to the user experience and impact the baseline assumptions developers would have when developing an app.

8.1. ثبات تجربه کاربر

A smooth user interface can be provided to the end user if there are certain minimum requirements to ensure a consistent frame rate and response times for applications and games. Device implementations, depending on the device type, MAY have measurable requirements for the user interface latency and task switching as described in section 2 .

8.2. عملکرد دسترسی به فایل ورودی/خروجی

Providing a common baseline for a consistent file access performance on the application private data storage ( /data partition) allows app developers to set a proper expectation that would help their software design. Device implementations, depending on the device type, MAY have certain requirements described in section 2 for the following read and write operations:

  • Sequential write performance . Measured by writing a 256MB file using 10MB write buffer.
  • Random write performance . Measured by writing a 256MB file using 4KB write buffer.
  • Sequential read performance . Measured by reading a 256MB file using 10MB write buffer.
  • Random read performance . Measured by reading a 256MB file using 4KB write buffer.

8.3. حالت های ذخیره انرژی

If device implementations include features to improve device power management that are included in AOSP or extend the features that are included in AOSP, they:

  • [C-1-1] MUST NOT deviate from the AOSP implementation for the triggering, maintenance, wakeup algorithms and the use of global system settings of App Standby and Doze power-saving modes.
  • [C-1-2] MUST NOT deviate from the AOSP implementation for the use of global settings to manage the throttling of jobs, alarm and network for apps in each bucket for App standby.
  • [C-1-3] MUST NOT deviate from the AOSP implementation for the number of the App Standby Buckets used for App Standby.
  • [C-1-4] MUST implement App Standby Buckets and Doze as described in Power Management .
  • [C-1-5] MUST return true for PowerManager.isPowerSaveMode() when the device is on power save mode.
  • [C-SR] Are STRONGLY RECOMMENDED to provide user affordance to enable and disable the battery saver feature.
  • [C-SR] Are STRONGLY RECOMMENDED to provide user affordance to display all Apps that are exempted from App Standby and Doze power-saving modes.

In addition to the power-saving modes, Android device implementations MAY implement any or all of the 4 sleeping power states as defined by the Advanced Configuration and Power Interface (ACPI).

If device implementations implement S4 power states as defined by the ACPI, they:

  • [C-1-1] MUST enter this state only after the user has taken an explicit action to put the device in an inactive state (eg by closing a lid that is physically part of the device or turning off a vehicle or television) and before the user re-activates the device (eg by opening the lid or turning the vehicle or television back on).

If device implementations implement S3 power states as defined by the ACPI, they:

  • [C-2-1] MUST meet C-1-1 above, or, MUST enter S3 state only when third-party applications do not need the system resources (eg the screen, CPU).

    Conversely, MUST exit from S3 state when third-party applications need the system resources, as described on this SDK.

    For example, while the third party applications request to keep the screen on through FLAG_KEEP_SCREEN_ON or keep CPU running through PARTIAL_WAKE_LOCK , the device MUST NOT enter S3 state unless, as described in C-1-1, the user has taken explicit action to put the device in an inactive state. Conversely, at a time when a task that third party apps implement through JobScheduler is triggered or Firebase Cloud Messaging is delivered to third party apps, the device MUST exit the S3 state unless the user has put the device in an inactive state. These are not comprehensive examples and AOSP implements extensive wake-up signals that trigger a wakeup from this state.

8.4. حسابداری مصرف برق

A more accurate accounting and reporting of the power consumption provides the app developer both the incentives and the tools to optimize the power usage pattern of the application.

پیاده سازی دستگاه:

  • [SR] STRONGLY RECOMMENDED to provide a per-component power profile that defines the current consumption value for each hardware component and the approximate battery drain caused by the components over time as documented in the Android Open Source Project site.
  • [SR] STRONGLY RECOMMENDED to report all power consumption values in milliampere hours (mAh).
  • [SR] STRONGLY RECOMMENDED to report CPU power consumption per each process's UID. The Android Open Source Project meets the requirement through the uid_cputime kernel module implementation.
  • [SR] STRONGLY RECOMMENDED to make this power usage available via the adb shell dumpsys batterystats shell command to the app developer.
  • SHOULD be attributed to the hardware component itself if unable to attribute hardware component power usage to an application.

8.5. عملکرد ثابت

Performance can fluctuate dramatically for high-performance long-running apps, either because of the other apps running in the background or the CPU throttling due to temperature limits. Android includes programmatic interfaces so that when the device is capable, the top foreground application can request that the system optimize the allocation of the resources to address such fluctuations.

پیاده سازی دستگاه:

If device implementations report support of Sustained Performance Mode, they:

  • [C-1-1] MUST provide the top foreground application a consistent level of performance for at least 30 minutes, when the app requests it.
  • [C-1-2] MUST honor the Window.setSustainedPerformanceMode() API and other related APIs.

If device implementations include two or more CPU cores, they:

  • SHOULD provide at least one exclusive core that can be reserved by the top foreground application.

If device implementations support reserving one exclusive core for the top foreground application, they:

  • [C-2-1] MUST report through the Process.getExclusiveCores() API method the ID numbers of the exclusive cores that can be reserved by the top foreground application.
  • [C-2-2] MUST not allow any user space processes except the device drivers used by the application to run on the exclusive cores, but MAY allow some kernel processes to run as necessary.

If device implementations do not support an exclusive core, they:

9. سازگاری مدل امنیتی

پیاده سازی دستگاه:

  • [C-0-1] MUST implement a security model consistent with the Android platform security model as defined in Security and Permissions reference document in the APIs in the Android developer documentation.

  • [C-0-2] MUST support installation of self-signed applications without requiring any additional permissions/certificates from any third parties/authorities. Specifically, compatible devices MUST support the security mechanisms described in the follow subsections.

9.1. مجوزها

پیاده سازی دستگاه:

  • [C-0-1] MUST support the Android permissions model as defined in the Android developer documentation. Specifically, they MUST enforce each permission defined as described in the SDK documentation; هیچ مجوز ممکن نیست حذف ، تغییر یا نادیده گرفته شود.

  • MAY add additional permissions, provided the new permission ID strings are not in the android.\* namespace.

  • [C-0-2] Permissions with a protectionLevel of PROTECTION_FLAG_PRIVILEGED MUST only be granted to apps preinstalled in the privileged path(s) of the system image and within the subset of the explicitly allowlisted permissions for each app. The AOSP implementation meets this requirement by reading and honoring the allowlisted permissions for each app from the files in the etc/permissions/ path and using the system/priv-app path as the privileged path.

Permissions with a protection level of dangerous are runtime permissions. Applications with targetSdkVersion > 22 request them at runtime.

پیاده سازی دستگاه:

  • [C-0-3] MUST show a dedicated interface for the user to decide whether to grant the requested runtime permissions and also provide an interface for the user to manage runtime permissions.
  • [C-0-4] MUST have one and only one implementation of both user interfaces.
  • [C-0-5] MUST NOT grant any runtime permissions to preinstalled apps unless:
    • The user's consent can be obtained before the application uses it.
    • The runtime permissions are associated with an intent pattern for which the preinstalled application is set as the default handler.
  • [C-0-6] MUST grant the android.permission.RECOVER_KEYSTORE permission only to system apps that register a properly secured Recovery Agent. A properly secured Recovery Agent is defined as an on-device software agent that synchronizes with an off-device remote storage, that is equipped with secure hardware with protection equivalent or stronger than what is described in Google Cloud Key Vault Service to prevent brute-force attacks on the lockscreen knowledge factor.

If device implementations include a preinstalled app or wish to allow third-party apps to access the usage statistics, they:

  • [SR] are STRONGLY RECOMMENDED provide user-accessible mechanism to grant or revoke access to the usage stats in response to the android.settings.ACTION_USAGE_ACCESS_SETTINGS intent for apps that declare the android.permission.PACKAGE_USAGE_STATS permission.

If device implementations intend to disallow any apps, including preinstalled apps, from accessing the usage statistics, they:

  • [C-1-1] MUST still have an activity that handles the android.settings.ACTION_USAGE_ACCESS_SETTINGS intent pattern but MUST implement it as a no-op, that is to have an equivalent behavior as when the user is declined for access.

9.2. UID و جداسازی فرآیند

پیاده سازی دستگاه:

  • [C-0-1] MUST support the Android application sandbox model, in which each application runs as a unique Unixstyle UID and in a separate process.
  • [C-0-2] MUST support running multiple applications as the same Linux user ID, provided that the applications are properly signed and constructed, as defined in the Security and Permissions reference .

9.3. مجوزهای سیستم فایل

پیاده سازی دستگاه:

9.4. محیط های اجرایی جایگزین

Device implementations MUST keep consistency of the Android security and permission model, even if they include runtime environments that execute applications using some other software or technology than the Dalvik Executable Format or native code. به عبارت دیگر:

  • [C-0-1] Alternate runtimes MUST themselves be Android applications, and abide by the standard Android security model, as described elsewhere in section 9 .

  • [C-0-2] Alternate runtimes MUST NOT be granted access to resources protected by permissions not requested in the runtime's AndroidManifest.xml file via the < uses-permission > mechanism.

  • [C-0-3] Alternate runtimes MUST NOT permit applications to make use of features protected by Android permissions restricted to system applications.

  • [C-0-4] Alternate runtimes MUST abide by the Android sandbox model and installed applications using an alternate runtime MUST NOT reuse the sandbox of any other app installed on the device, except through the standard Android mechanisms of shared user ID and signing certificate .

  • [C-0-5] Alternate runtimes MUST NOT launch with, grant, or be granted access to the sandboxes corresponding to other Android applications.

  • [C-0-6] Alternate runtimes MUST NOT be launched with, be granted, or grant to other applications any privileges of the superuser (root), or of any other user ID.

  • [C-0-7] When the .apk files of alternate runtimes are included in the system image of device implementations, it MUST be signed with a key distinct from the key used to sign other applications included with the device implementations.

  • [C-0-8] When installing applications, alternate runtimes MUST obtain user consent for the Android permissions used by the application.

  • [C-0-9] When an application needs to make use of a device resource for which there is a corresponding Android permission (such as Camera, GPS, etc.), the alternate runtime MUST inform the user that the application will be able to access that resource.

  • [C-0-10] When the runtime environment does not record application capabilities in this manner, the runtime environment MUST list all permissions held by the runtime itself when installing any application using that runtime.

  • Alternate runtimes SHOULD install apps via the PackageManager into separate Android sandboxes (Linux user IDs, etc.).

  • Alternate runtimes MAY provide a single Android sandbox shared by all applications using the alternate runtime.

9.5. پشتیبانی چند کاربره

Android includes support for multiple users and provides support for full user isolation.

  • Device implementations MAY but SHOULD NOT enable multi-user if they use removable media for primary external storage.

If device implementations include multiple users, they:

  • [C-1-1] MUST meet the following requirements related to multi-user support .
  • [C-1-2] MUST, for each user, implement a security model consistent with the Android platform security model as defined in Security and Permissions reference document in the APIs.
  • [C-1-3] MUST have separate and isolated shared application storage (aka /sdcard ) directories for each user instance.
  • [C-1-4] MUST ensure that applications owned by and running on behalf a given user cannot list, read, or write to the files owned by any other user, even if the data of both users are stored on the same volume or filesystem.
  • [C-1-5] MUST encrypt the contents of the SD card when multiuser is enabled using a key stored only on non-removable media accessible only to the system if device implementations use removable media for the external storage APIs. As this will make the media unreadable by a host PC, device implementations will be required to switch to MTP or a similar system to provide host PCs with access to the current user's data.

If device implementations include multiple users and do not declare the android.hardware.telephony feature flag, they:

  • [C-2-1] MUST support restricted profiles, a feature that allows device owners to manage additional users and their capabilities on the device. With restricted profiles, device owners can quickly set up separate environments for additional users to work in, with the ability to manage finer-grained restrictions in the apps that are available in those environments.

If device implementations include multiple users and declare the android.hardware.telephony feature flag, they:

  • [C-3-1] MUST NOT support restricted profiles but MUST align with the AOSP implementation of controls to enable /disable other users from accessing the voice calls and SMS.

9.6. هشدار پیامک برتر

Android includes support for warning users of any outgoing premium SMS message . Premium SMS messages are text messages sent to a service registered with a carrier that may incur a charge to the user.

If device implementations declare support for android.hardware.telephony , they:

  • [C-1-1] MUST warn users before sending a SMS message to numbers identified by regular expressions defined in /data/misc/sms/codes.xml file in the device. The upstream Android Open Source Project provides an implementation that satisfies this requirement.

9.7. ویژگی های امنیتی

Device implementations MUST ensure compliance with security features in both the kernel and platform as described below.

The Android Sandbox includes features that use the Security-Enhanced Linux (SELinux) mandatory access control (MAC) system, seccomp sandboxing, and other security features in the Linux kernel. پیاده سازی دستگاه:

  • [C-0-1] MUST maintain compatibility with existing applications, even when SELinux or any other security features are implemented below the Android framework.
  • [C-0-2] MUST NOT have a visible user interface when a security violation is detected and successfully blocked by the security feature implemented below the Android framework, but MAY have a visible user interface when an unblocked security violation occurs resulting in a successful بهره برداری.
  • [C-0-3] MUST NOT make SELinux or any other security features implemented below the Android framework configurable to the user or app developer.
  • [C-0-4] MUST NOT allow an application that can affect another application through an API (such as a Device Administration API) to configure a policy that breaks compatibility.
  • [C-0-5] MUST split the media framework into multiple processes so that it is possible to more narrowly grant access for each process as described in the Android Open Source Project site.
  • [C-0-6] MUST implement a kernel application sandboxing mechanism which allows filtering of system calls using a configurable policy from multithreaded programs. The upstream Android Open Source Project meets this requirement through enabling the seccomp-BPF with threadgroup synchronization (TSYNC) as described in the Kernel Configuration section of source.android.com .

Kernel integrity and self-protection features are integral to Android security. پیاده سازی دستگاه:

  • [C-0-7] MUST implement kernel stack buffer overflow protections (eg CONFIG_CC_STACKPROTECTOR_STRONG ).
  • [C-0-8] MUST implement strict kernel memory protections where executable code is read-only, read-only data is non-executable and non-writable, and writable data is non-executable (eg CONFIG_DEBUG_RODATA or CONFIG_STRICT_KERNEL_RWX ).
  • [C-0-9] MUST implement static and dynamic object size bounds checking of copies between user-space and kernel-space (eg CONFIG_HARDENED_USERCOPY ) on devices originally shipping with API level 28 or higher.
  • [C-0-10] MUST NOT execute user-space memory when executing in the kernel mode (eg hardware PXN, or emulated via CONFIG_CPU_SW_DOMAIN_PAN or CONFIG_ARM64_SW_TTBR0_PAN ) on devices originally shipping with API level 28 or higher.
  • [C-0-11] MUST NOT read or write user-space memory in the kernel outside of normal usercopy access APIs (eg hardware PAN, or emulated via CONFIG_CPU_SW_DOMAIN_PAN or CONFIG_ARM64_SW_TTBR0_PAN ) on devices originally shipping with API level 28 or higher.
  • [C-0-12] MUST implement kernel page table isolation on all devices originally shipping with API level 28 or higher (eg CONFIG_PAGE_TABLE_ISOLATION or `CONFIG_UNMAP_KERNEL_AT_EL0).
  • [SR] STRONGLY RECOMMENDED to keep kernel data which is written only during initialization marked read-only after initialization (eg __ro_after_init ).
  • [SR] STRONGLY RECOMMENDED to randomize the layout of the kernel code and memory, and to avoid exposures that would compromise the randomization (eg CONFIG_RANDOMIZE_BASE with bootloader entropy via the /chosen/kaslr-seed Device Tree node or EFI_RNG_PROTOCOL ).

If device implementations use a Linux kernel, they:

  • [C-1-1] MUST implement SELinux.
  • [C-1-2] MUST set SELinux to global enforcing mode.
  • [C-1-3] MUST configure all domains in enforcing mode. No permissive mode domains are allowed, including domains specific to a device/vendor.
  • [C-1-4] MUST NOT modify, omit, or replace the neverallow rules present within the system/sepolicy folder provided in the upstream Android Open Source Project (AOSP) and the policy MUST compile with all neverallow rules present, for both AOSP SELinux domains as well as device/vendor specific domains.
  • [C-1-5] MUST run third-party applications targeting API level 28 or higher in per-application SELinux sandboxes with per-app SELinux restrictions on each application's private data directory.
  • SHOULD retain the default SELinux policy provided in the system/sepolicy folder of the upstream Android Open Source Project and only further add to this policy for their own device-specific configuration.

If device implementations use kernel other than Linux, they:

  • [C-2-1] MUST use a mandatory access control system that is equivalent to SELinux.

Android contains multiple defense-in-depth features that are integral to device security.

پیاده سازی دستگاه:

  • [C-SR] Are STRONGLY RECOMMENDED not to disable Control-Flow Integrity (CFI) or Integer Overflow Sanitization (IntSan) on components that have it enabled.
  • [C-SR] Are STRONGLY RECOMMENDED to enable both CFI and IntSan for any additional security-sensitive userspace components as explained in CFI and IntSan .

9.8. حریم خصوصی

9.8.1. تاریخچه استفاده

Android stores the history of the user's choices and manages such history by UsageStatsManager .

پیاده سازی دستگاه:

  • [C-0-1] MUST keep a reasonable retention period of such user history.
  • [SR] Are STRONGLY RECOMMENDED to keep the 14 days retention period as configured by default in the AOSP implementation.

Android stores the system events using the StatsLog identifiers, and manages such history via the StatsManager and the IncidentManager System API.

پیاده سازی دستگاه:

  • [C-0-2] MUST only include the fields marked with DEST_AUTOMATIC in the incident report created by the System API class IncidentManager .
  • [C-0-3] MUST not use the system event identifiers to log any other event than what is described in the StatsLog SDK documents. If additional system events are logged, they MAY use a different atom identifier in the range between 100,000 and 200,000.

9.8.2. در حال ضبط

پیاده سازی دستگاه:

  • [C-0-1] MUST NOT preload or distribute software components out-of-box that send the user's private information (eg keystrokes, text displayed on the screen) off the device without the user's consent or clear ongoing notifications.

If device implementations include functionality in the system that captures the contents displayed on the screen and/or records the audio stream played on the device, they:

  • [C-1-1] MUST have an ongoing notification to the user whenever this functionality is enabled and actively capturing/recording.

If device implementations include a component enabled out-of-box, capable of recording ambient audio to infer useful information about user's context, they:

  • [C-2-1] MUST NOT store in persistent on-device storage or transmit off the device the recorded raw audio or any format that can be converted back into the original audio or a near facsimile, except with explicit user consent.

9.8.3. قابلیت اتصال

If device implementations have a USB port with USB peripheral mode support, they:

  • [C-1-1] MUST present a user interface asking for the user's consent before allowing access to the contents of the shared storage over the USB port.

9.8.4. ترافیک شبکه

پیاده سازی دستگاه:

  • [C-0-1] MUST preinstall the same root certificates for the system-trusted Certificate Authority (CA) store as provided in the upstream Android Open Source Project.
  • [C-0-2] MUST ship with an empty user root CA store.
  • [C-0-3] MUST display a warning to the user indicating the network traffic may be monitored, when a user root CA is added.

If device traffic is routed through a VPN, device implementations:

  • [C-1-1] MUST display a warning to the user indicating either:
    • That network traffic may be monitored.
    • That network traffic is being routed through the specific VPN application providing the VPN.

If device implementations have a mechanism, enabled out-of-box by default, that routes network data traffic through a proxy server or VPN gateway (for example, preloading a VPN service with android.permission.CONTROL_VPN granted), they:

  • [C-2-1] MUST ask for the user's consent before enabling that mechanism, unless that VPN is enabled by the Device Policy Controller via the DevicePolicyManager.setAlwaysOnVpnPackage() , in which case the user does not need to provide a separate consent, but MUST only be notified.

If device implementations implement a user affordance to toggle on the "always-on VPN" function of a 3rd-party VPN app, they:

  • [C-3-1] MUST disable this user affordance for apps that do not support always-on VPN service in the AndroidManifest.xml file via setting the SERVICE_META_DATA_SUPPORTS_ALWAYS_ON attribute to false .

9.9. رمزگذاری ذخیره سازی داده ها

If Advanced Encryption Standard (AES) crypto performance, measured with the most performant AES technology available on the device (eg the ARM Cryptography Extensions), is above 50 MiB/sec, device implementations:

  • [C-1-1] MUST support data storage encryption of the application private data ( /data partition), as well as the application shared storage partition ( /sdcard partition) if it is a permanent, non-removable part of the device, except for device implementations that are typically shared (eg Television).
  • [C-1-2] MUST enable the data storage encryption by default at the time the user has completed the out-of-box setup experience, except for device implementations that are typically shared (eg Television).

If the AES crypto performance is at or below 50 MiB/sec, device implementations MAY use Adiantum-XChaCha12-AES instead of the form of AES listed in any of the following: AES-256-XTS in Section 9.9.2 [C-1-5]; AES-256 in CBS-CTS mode in Section 9.9.2 [C-1-6]; AES in Section 9.9.3 [C-1-1]; AES in Section 9.9.3 [C-1-3].

If device implementations are already launched on an earlier Android version and cannot meet the requirement through a system software update, they MAY be exempted from the above requirements.

پیاده سازی دستگاه:

9.9.1. بوت مستقیم

پیاده سازی دستگاه:

  • [C-0-1] MUST implement the Direct Boot mode APIs even if they do not support Storage Encryption.

  • [C-0-2] The ACTION_LOCKED_BOOT_COMPLETED and ACTION_USER_UNLOCKED Intents MUST still be broadcast to signal Direct Boot aware applications that Device Encrypted (DE) and Credential Encrypted (CE) storage locations are available for user.

9.9.2. رمزگذاری مبتنی بر فایل

If device implementations support FBE, they:

  • [C-1-1] MUST boot up without challenging the user for credentials and allow Direct Boot aware apps to access to the Device Encrypted (DE) storage after the ACTION_LOCKED_BOOT_COMPLETED message is broadcasted.
  • [C-1-2] MUST only allow access to Credential Encrypted (CE) storage after the user has unlocked the device by supplying their credentials (eg. passcode, pin, pattern or fingerprint) and the ACTION_USER_UNLOCKED message is broadcasted.
  • [C-1-3] MUST NOT offer any method to unlock the CE protected storage without either the user-supplied credentials or a registered escrow key.
  • [C-1-4] MUST support Verified Boot and ensure that DE keys are cryptographically bound to the device's hardware root of trust.
  • [C-1-5] MUST support encrypting file contents using AES-256-XTS. AES-256-XTS refers to the Advanced Encryption Standard with a 256-bit key length, operated in XTS mode. The full length of the XTS key is 512 bits.
  • [C-1-6] MUST support encrypting file names using AES-256 in CBC-CTS mode.

  • The keys protecting CE and DE storage areas:

  • [C-1-7] MUST be cryptographically bound to a hardware-backed Keystore.

  • [C-1-8] CE keys MUST be bound to a user's lock screen credentials.
  • [C-1-9] CE keys MUST be bound to a default passcode when the user has not specified lock screen credentials.
  • [C-1-10] MUST be unique and distinct, in other words no user's CE or DE key matches any other user's CE or DE keys.

  • [C-1-11] MUST use the mandatorily supported ciphers, key lengths and modes by default.

  • [C-SR] Are STRONGLY RECOMMENDED to encrypt file system metadata, such as file sizes, ownership, modes, and Extended attributes (xattrs), with a key cryptographically bound to the device's hardware root of trust.

  • SHOULD make preinstalled essential apps (eg Alarm, Phone, Messenger) Direct Boot aware.

  • MAY support alternative ciphers, key lengths and modes for file content and file name encryption.

The upstream Android Open Source project provides a preferred implementation of this feature based on the Linux kernel ext4 encryption feature.

9.9.3. رمزگذاری کامل دیسک

If device implementations support full disk encryption (FDE), they:

  • [C-1-1] MUST use AES in a mode designed for storage (for example, XTS or CBC-ESSIV), and with a cipher key length of 128 bits or greater.
  • [C-1-2] MUST use a default passcode to wrap the encryption key and MUST NOT write the encryption key to storage at any time without being encrypted.
  • [C-1-3] MUST AES encrypt the encryption key by default unless the user explicitly opts out, except when it is in active use, with the lock screen credentials stretched using a slow stretching algorithm (eg PBKDF2 or scrypt).
  • [C-1-4] The above default password stretching algorithm MUST be cryptographically bound to that keystore when the user has not specified a lock screen credentials or has disabled use of the passcode for encryption and the device provides a hardware-backed keystore.
  • [C-1-5] MUST NOT send encryption key off the device (even when wrapped with the user passcode and/or hardware bound key).

The upstream Android Open Source project provides a preferred implementation of this feature, based on the Linux kernel feature dm-crypt.

9.10. یکپارچگی دستگاه

The following requirements ensures there is transparency to the status of the device integrity. پیاده سازی دستگاه:

  • [C-0-1] MUST correctly report through the System API method PersistentDataBlockManager.getFlashLockState() whether their bootloader state permits flashing of the system image. The FLASH_LOCK_UNKNOWN state is reserved for device implementations upgrading from an earlier version of Android where this new system API method did not exist.

  • [C-0-2] MUST support Verified Boot for device integrity.

If device implementations are already launched without supporting Verified Boot on an earlier version of Android and can not add support for this feature with a system software update, they MAY be exempted from the requirement.

Verified Boot is a feature that guarantees the integrity of the device software. If device implementations support the feature, they:

  • [C-1-1] MUST declare the platform feature flag android.software.verified_boot .
  • [C-1-2] MUST perform verification on every boot sequence.
  • [C-1-3] MUST start verification from an immutable hardware key that is the root of trust and go all the way up to the system partition.
  • [C-1-4] MUST implement each stage of verification to check the integrity and authenticity of all the bytes in the next stage before executing the code in the next stage.
  • [C-1-5] MUST use verification algorithms as strong as current recommendations from NIST for hashing algorithms (SHA-256) and public key sizes (RSA-2048).
  • [C-1-6] MUST NOT allow boot to complete when system verification fails, unless the user consents to attempt booting anyway, in which case the data from any non-verified storage blocks MUST not be used.
  • [C-1-7] MUST NOT allow verified partitions on the device to be modified unless the user has explicitly unlocked the bootloader.
  • [C-SR] If there are multiple discrete chips in the device (eg radio, specialized image processor), the boot process of each of those chips is STRONGLY RECOMMENDED to verify every stage upon booting.
  • [C-1-8] MUST use tamper-evident storage: for storing whether the bootloader is unlocked. Tamper-evident storage means that the boot loader can detect if the storage has been tampered with from inside Android.
  • [C-1-9] MUST prompt the user, while using the device, and require physical confirmation before allowing a transition from boot loader locked mode to boot loader unlocked mode.
  • [C-1-10] MUST implement rollback protection for partitions used by Android (eg boot, system partitions) and use tamper-evident storage for storing the metadata used for determining the minimum allowable OS version.
  • [C-SR] Are STRONGLY RECOMMENDED to verify all privileged app APK files with a chain of trust rooted in /system , which is protected by Verified Boot.
  • [C-SR] Are STRONGLY RECOMMENDED to verify any executable artifacts loaded by a privileged app from outside its APK file (such as dynamically loaded code or compiled code) before executing them or STRONGLY RECOMMENDED not to execute them at all.
  • SHOULD implement rollback protection for any component with persistent firmware (eg modem, camera) and SHOULD use tamper-evident storage for storing the metadata used for determining the minimum allowable version.

If device implementations are already launched without supporting C-1-8 through C-1-10 on an earlier version of Android and can not add support for these requirements with a system software update, they MAY be exempted from the requirements.

The upstream Android Open Source Project provides a preferred implementation of this feature in the external/avb/ repository, which can be integrated into the boot loader used for loading Android.

پیاده سازی دستگاه:

If device implementations support the Android Protected Confirmation API they:

  • [C-3-1] MUST report true for the ConfirmationPrompt.isSupported() API.
  • [C-3-2] MUST ensure that secure hardware takes full control of display in such a way that Android OS cannot block it without detection by the secure hardware.
  • [C-3-3] MUST ensure that secure hardware takes full control of the touch screen.

9.11. کلیدها و اعتبارنامه ها

The Android Keystore System allows app developers to store cryptographic keys in a container and use them in cryptographic operations through the KeyChain API or the Keystore API . پیاده سازی دستگاه:

  • [C-0-1] MUST allow at least 8,192 keys to be imported or generated.
  • [C-0-2] The lock screen authentication MUST rate-limit attempts and MUST have an exponential backoff algorithm. Beyond 150 failed attempts, the delay MUST be at least 24 hours per attempt.
  • SHOULD not limit the number of keys that can be generated

When the device implementation supports a secure lock screen, it:

  • [C-1-1] MUST back up the keystore implementation with an isolated execution environment.
  • [C-1-2] MUST have implementations of RSA, AES, ECDSA and HMAC cryptographic algorithms and MD5, SHA1, and SHA-2 family hash functions to properly support the Android Keystore system's supported algorithms in an area that is securely isolated from the code running on the kernel and above. Secure isolation MUST block all potential mechanisms by which kernel or userspace code might access the internal state of the isolated environment, including DMA. The upstream Android Open Source Project (AOSP) meets this requirement by using the Trusty implementation, but another ARM TrustZone-based solution or a third-party reviewed secure implementation of a proper hypervisor-based isolation are alternative options.
  • [C-1-3] MUST perform the lock screen authentication in the isolated execution environment and only when successful, allow the authentication-bound keys to be used. Lock screen credentials MUST be stored in a way that allows only the isolated execution environment to perform lock screen authentication. The upstream Android Open Source Project provides the Gatekeeper Hardware Abstraction Layer (HAL) and Trusty, which can be used to satisfy this requirement.
  • [C-1-4] MUST support key attestation where the attestation signing key is protected by secure hardware and signing is performed in secure hardware. The attestation signing keys MUST be shared across large enough number of devices to prevent the keys from being used as device identifiers. One way of meeting this requirement is to share the same attestation key unless at least 100,000 units of a given SKU are produced. If more than 100,000 units of an SKU are produced, a different key MAY be used for each 100,000 units.
  • [C-1-5] MUST allow the user to choose the Sleep timeout for transition from the unlocked to the locked state, with a minimum allowable timeout up to 15 seconds.

Note that if a device implementation is already launched on an earlier Android version, such a device is exempted from the requirement to have a keystore backed by an isolated execution environment and support the key attestation, unless it declares the android.hardware.fingerprint feature which requires a keystore backed by an isolated execution environment.

9.11.1. صفحه قفل امن

The AOSP implementation follows a tiered authentication model where a knowledge-factory based primary authentication can be backed by either a secondary strong biometric, or by weaker tertiary modalities.

پیاده سازی دستگاه:

  • [C-SR] Are STRONGLY RECOMMENDED to set only one of the following as the primary authentication method:
    • A numerical PIN
    • An alphanumerical password
    • A swipe pattern on a grid of exactly 3x3 dots

Note that the above authentication methods are referred as the recommended primary authentication methods in this document.

If device implementations add or modify the recommended primary authentication methods and use a new authentication method as a secure way to lock the screen, the new authentication method:

If device implementations add or modify the authentication methods to unlock the lock screen if based on a known secret and use a new authentication method to be treated as a secure way to lock the screen:

  • [C-3-1] The entropy of the shortest allowed length of inputs MUST be greater than 10 bits.
  • [C-3-2] The maximum entropy of all possible inputs MUST be greater than 18 bits.
  • [C-3-3] The new authentication method MUST NOT replace any of the recommended primary authentication methods (ie PIN, pattern, password) implemented and provided in AOSP.
  • [C-3-4] The new authentication method MUST be disabled when the Device Policy Controller (DPC) application has set the password quality policy via the DevicePolicyManager.setPasswordQuality() method with a more restrictive quality constant than PASSWORD_QUALITY_SOMETHING .

If device implementations add or modify the recommended primary authentication methods to unlock the lock screen and use a new authentication method that is based on biometrics to be treated as a secure way to lock the screen, the new method:

  • [C-4-1] MUST meet all requirements described in section 7.3.10.2 .
  • [C-4-2] MUST have a fall-back mechanism to use one of the recommended primary authentication methods which is based on a known secret.
  • [C-4-3] MUST be disabled and only allow the recommended primary authentication to unlock the screen when the Device Policy Controller (DPC) application has set the keguard feature policy by calling the method DevicePolicyManager.setKeyguardDisabledFeatures() , with any of the associated biometric flags (ie KEYGUARD_DISABLE_BIOMETRICS , KEYGUARD_DISABLE_FINGERPRINT , KEYGUARD_DISABLE_FACE , or KEYGUARD_DISABLE_IRIS ).
  • [C-4-4] MUST challenge the user for the recommended primary authentication (eg PIN, pattern, password) at least once every 72 hours or less.
  • [C-4-5] MUST have a false acceptance rate that is equal or stronger than what is required for a fingerprint sensor as described in section section 7.3.10 , or otherwise MUST be disabled and only allow the recommended primary authentication to unlock the screen when the Device Policy Controller (DPC) application has set the password quality policy via the DevicePolicyManager.setPasswordQuality() method with a more restrictive quality constant than PASSWORD_QUALITY_BIOMETRIC_WEAK .
  • [C-SR] Are STRONGLY RECOMMENDED to have spoof and imposter acceptance rates that are equal to or stronger than what is required for a fingerprint sensor as described in section 7.3.10 .
  • [C-4-6] MUST have a secure processing pipeline such that an operating system or kernel compromise cannot allow data to be directly injected to falsely authenticate as the user.
  • [C-4-7] MUST be paired with an explicit confirm action (eg: a button press) to allow access to keystore keys if the application sets true for KeyGenParameterSpec.Built.setUserAuthenticationRequired() and the biometric is passive (eg face or iris where no explicit signal of intent exists).
  • [C-SR] The confirm action for passive biometrics is STRONGLY RECOMMENDED to be secured such that an operating system or kernel compromise cannot spoof it. For example, this means that the confirm action based on a physical button is routed through an input-only general-purpose input/output (GPIO) pin of a secure element (SE) that cannot be driven by any other means than a physical button مطبوعات.

If the biometric authentication methods do not meet the spoof and imposter acceptance rates as described in section 7.3.10 :

  • [C-5-1] The methods MUST be disabled if the Device Policy Controller (DPC) application has set the password quality policy via the DevicePolicyManager.setPasswordQuality() method with a more restrictive quality constant than PASSWORD_QUALITY_BIOMETRIC_WEAK .
  • [C-5-2] The user MUST be challenged for the recommended primary authentication (eg: PIN, pattern, password) after any 4-hour idle timeout period. The idle timeout period is reset after any successful confirmation of the device credentials.
  • [C-5-3] The methods MUST NOT be treated as a secure lock screen, and MUST meet the requirements that start with C-8 in this section below.

If device implementations add or modify the authentication methods to unlock the lock screen and a new authentication method is based on a physical token or the location:

  • [C-6-1] They MUST have a fall-back mechanism to use one of the recommended primary authentication methods which is based on a known secret and meet the requirements to be treated as a secure lock screen.
  • [C-6-2] The new method MUST be disabled and only allow one of the recommended primary authentication methods to unlock the screen when the Device Policy Controller (DPC) application has set the policy with either the DevicePolicyManager.setKeyguardDisabledFeatures(KEYGUARD_DISABLE_TRUST_AGENTS) method or the DevicePolicyManager.setPasswordQuality() method with a more restrictive quality constant than PASSWORD_QUALITY_UNSPECIFIED .
  • [C-6-3] The user MUST be challenged for one of the recommended primary authentication methods (egPIN, pattern, password) at least once every 72 hours or less.
  • [C-6-4] The new method MUST NOT be treated as a secure lock screen and MUST follow the constraints listed in C-8 below.

If device implementations have a secure lock screen and include one or more trust agent, which implements the TrustAgentService System API, they:

  • [C-7-1] MUST have clear indication in the settings menu and on the lock screen when device lock is deferred or can be unlocked by trust agent(s). For example, AOSP meets this requirement by showing a text description for the "Automatically lock setting" and "Power button instantly locks" in the settings menu and a distinguishable icon on the lock screen.
  • [C-7-2] MUST respect and fully implement all trust agent APIs in the DevicePolicyManager class, such as the KEYGUARD_DISABLE_TRUST_AGENTS constant.
  • [C-7-3] MUST NOT fully implement the TrustAgentService.addEscrowToken() function on a device that is used as a primary personal device (eg handheld) but MAY fully implement the function on device implementations that are typically shared (eg Android Television or Automotive device).
  • [C-7-4] MUST encrypt all stored tokens added by TrustAgentService.addEscrowToken() .
  • [C-7-5] MUST NOT store the encryption key on the same device where the key is used. For example, it is allowed for a key stored on a phone to unlock a user account on a TV.
  • [C-7-6] MUST inform the user about the security implications before enabling the escrow token to decrypt the data storage.
  • [C-7-7] MUST have a fall-back mechanism to use one of the recommended primary authentication methods.
  • [C-7-8] The user MUST be challenged for one of the recommended primary authentication (eg: PIN, pattern, password) methods at least once every 72 hours or less.
  • [C-7-9] The user MUST be challenged for one of the recommended primary authentication (eg: PIN, pattern, password) methods after any 4-hour idle timeout period. The idle timeout period is reset after any successful confirmation of the device credentials.
  • [C-7-10] MUST NOT be treated as a secure lock screen and MUST follow the constraints listed in C-8 below.

If device implementations add or modify the authentication methods to unlock the lock screen that is not a secure lock screen as described above, and use a new authentication method to unlock the keyguard:

9.11.2. StrongBox

The Android Keystore System allows app developers to store cryptographic keys in a dedicated secure processor as well as the isolated execution environment described above.

پیاده سازی دستگاه:

  • [C-SR] Are STRONGLY RECOMMENDED to support StrongBox.

If device implementations support StrongBox, they:

  • [C-1-1] MUST declare FEATURE_STRONGBOX_KEYSTORE .

  • [C-1-2] MUST provide dedicated secure hardware that is used to back keystore and secure user authentication.

  • [C-1-3] MUST have a discrete CPU that shares no cache, DRAM, coprocessors or other core resources with the application processor (AP).

  • [C-1-4] MUST ensure that any peripherals shared with the AP cannot alter StrongBox processing in any way, or obtain any information from the StrongBox. The AP MAY disable or block access to StrongBox.

  • [C-1-5] MUST have an internal clock with reasonable accuracy (+-10%) that is immune to manipulation by the AP.

  • [C-1-6] MUST have a true random number generator that produces uniformly-distributed and unpredictable output.

  • [C-1-7] MUST have tamper resistance, including resistance against physical penetration, and glitching.

  • [C-1-8] MUST have side-channel resistance, including resistance against leaking information via power, timing, electromagnetic radiation, and thermal radiation side channels.

  • [C-1-9] MUST have secure storage which ensures confidentiality, integrity, authenticity, consistency, and freshness of the contents. The storage MUST NOT be able to be read or altered, except as permitted by the StrongBox APIs.

  • To validate compliance with [C-1-3] through [C-1-9], device implementations:

    • [C-1-10] MUST include the hardware that is certified against the Secure IC Protection Profile BSI-CC-PP-0084-2014 or evaluated by a nationally accredited testing laboratory incorporating High attack potential vulnerability assessment according to the Common Criteria Application of Attack Potential to Smartcards .
    • [C-1-11] MUST include the firmware that is evaluated by a nationally accredited testing laboratory incorporating High attack potential vulnerability assessment according to the Common Criteria Application of Attack Potential to Smartcards .
    • [C-SR] Are STRONGLY RECOMMENDED to include the hardware that is evaluated using a Security Target, Evaluation Assurance Level (EAL) 5, augmented by AVA_VAN.5. EAL 5 certification will likely become a requirement in a future release.
  • [C-SR] are STRONGLY RECOMMENDED to provide insider attack resistance (IAR), which means that an insider with access to firmware signing keys cannot produce firmware that causes the StrongBox to leak secrets, to bypass functional security requirements or otherwise enable access to sensitive داده های کاربر The recommended way to implement IAR is to allow firmware updates only when the primary user password is provided via the IAuthSecret HAL.

9.12. حذف داده ها

All device implementations:

  • [C-0-1] MUST provide users a mechanism to perform a "Factory Data Reset".
  • [C-0-2] MUST delete all user-generated data. That is, all data except for the following:
    • The system image
    • Any operating system files required by the system image
  • [C-0-3] MUST delete the data in such a way that will satisfy relevant industry standards such as NIST SP800-88.
  • [C-0-4] MUST trigger the above "Factory Data Reset" process when the DevicePolicyManager.wipeData() API is called by the primary user's Device Policy Controller app.
  • MAY provide a fast data wipe option that conducts only a logical data erase.

9.13. حالت بوت ایمن

Android provides Safe Boot Mode, which allows users to boot up into a mode where only preinstalled system apps are allowed to run and all third-party apps are disabled. This mode, known as "Safe Boot Mode", provides the user the capability to uninstall potentially harmful third-party apps.

Device implementations are:

  • [SR] STRONGLY RECOMMENDED to implement Safe Boot Mode.

If device implementations implement Safe Boot Mode, they:

  • [C-1-1] MUST provide the user an option to enter Safe Boot Mode in such a way that is uninterruptible from third-party apps installed on the device, except when the third-party app is a Device Policy Controller and has set the UserManager.DISALLOW_SAFE_BOOT flag as true.

  • [C-1-2] MUST provide the user the capability to uninstall any third-party apps within Safe Mode.

  • SHOULD provide the user an option to enter Safe Boot Mode from the boot menu using a workflow that is different from that of a normal boot.

9.14. جداسازی سیستم خودروی خودرو

Android Automotive devices are expected to exchange data with critical vehicle subsystems by using the vehicle HAL to send and receive messages over vehicle networks such as CAN bus.

The data exchange can be secured by implementing security features below the Android framework layers to prevent malicious or unintentional interaction with these subsystems.

9.15. طرح های اشتراک

"Subscription plans" refer to the billing relationship plan details provided by a mobile carrier through SubscriptionManager.setSubscriptionPlans() .

All device implementations:

  • [C-0-1] MUST return subscription plans only to the mobile carrier app that has originally provided them.
  • [C-0-2] MUST NOT remotely back up or upload subscription plans.
  • [C-0-3] MUST only allow overrides, such as SubscriptionManager.setSubscriptionOverrideCongested() , from the mobile carrier app currently providing valid subscription plans.

10. تست سازگاری نرم افزار

Device implementations MUST pass all tests described in this section. However, note that no software test package is fully comprehensive. For this reason, device implementers are STRONGLY RECOMMENDED to make the minimum number of changes as possible to the reference and preferred implementation of Android available from the Android Open Source Project. This will minimize the risk of introducing bugs that create incompatibilities requiring rework and potential device updates.

10.1. مجموعه تست سازگاری

پیاده سازی دستگاه:

  • [C-0-1] MUST pass the Android Compatibility Test Suite (CTS) available from the Android Open Source Project, using the final shipping software on the device.

  • [C-0-2] MUST ensure compatibility in cases of ambiguity in CTS and for any reimplementations of parts of the reference source code.

CTS به گونه ای طراحی شده است که بر روی یک دستگاه واقعی اجرا شود. مانند هر نرم افزاری ، CTS ممکن است خود دارای اشکالات باشد. The CTS will be versioned independently of this Compatibility Definition, and multiple revisions of the CTS may be released for Android 9.

پیاده سازی دستگاه:

  • [C-0-3] MUST pass the latest CTS version available at the time the device software is completed.

  • SHOULD use the reference implementation in the Android Open Source tree as much as possible.

10.2. تأیید کننده CTS

The CTS Verifier is included with the Compatibility Test Suite, and is intended to be run by a human operator to test functionality that cannot be tested by an automated system, such as correct functioning of a camera and sensors.

پیاده سازی دستگاه:

  • [C-0-1] MUST correctly execute all applicable cases in the CTS verifier.

The CTS Verifier has tests for many kinds of hardware, including some hardware that is optional.

پیاده سازی دستگاه:

  • [C-0-2] MUST pass all tests for hardware that they possess; for instance, if a device possesses an accelerometer, it MUST correctly execute the Accelerometer test case in the CTS Verifier.

Test cases for features noted as optional by this Compatibility Definition Document MAY be skipped or omitted.

  • [C-0-2] Every device and every build MUST correctly run the CTS Verifier, as noted above. However, since many builds are very similar, device implementers are not expected to explicitly run the CTS Verifier on builds that differ only in trivial ways. Specifically, device implementations that differ from an implementation that has passed the CTS Verifier only by the set of included locales, branding, etc. MAY omit the CTS Verifier test.

11. نرم افزار قابل به روز رسانی

  • [C-0-1] Device implementations MUST include a mechanism to replace the entirety of the system software. The mechanism need not perform “live” upgrades—that is, a device restart MAY be required. Any method can be used, provided that it can replace the entirety of the software preinstalled on the device. For instance, any of the following approaches will satisfy this requirement:

    • “Over-the-air (OTA)” downloads with offline update via reboot.
    • “Tethered” updates over USB from a host PC.
    • “Offline” updates via a reboot and update from a file on removable storage.
  • [C-0-2] The update mechanism used MUST support updates without wiping user data. That is, the update mechanism MUST preserve application private data and application shared data. Note that the upstream Android software includes an update mechanism that satisfies this requirement.

If the device implementations includes support for an unmetered data connection such as 802.11 or Bluetooth PAN (Personal Area Network) profile, then, they:

  • [C-1-1] MUST support OTA downloads with offline update via reboot.

For device implementations that are launching with Android 6.0 and later, the update mechanism SHOULD support verifying that the system image is binary identical to expected result following an OTA. The block-based OTA implementation in the upstream Android Open Source Project, added since Android 5.1, satisfies this requirement.

Also, device implementations SHOULD support A/B system updates . The AOSP implements this feature using the boot control HAL.

If an error is found in a device implementation after it has been released but within its reasonable product lifetime that is determined in consultation with the Android Compatibility Team to affect the compatibility of third-party applications, then:

  • [C-2-1] The device implementer MUST correct the error via a software update available that can be applied per the mechanism just described.

Android includes features that allow the Device Owner app (if present) to control the installation of system updates. If the system update subsystem for devices report android.software.device_admin then, they:

12. سند تغییرات

For a summary of changes to the Compatibility Definition in this release:

For a summary of changes to individuals sections:

  1. معرفی
  2. Device Types
  3. نرم افزار
  4. Application Packaging
  5. چند رسانه ای
  6. Developer Tools and Options
  7. Hardware Compatibility
  8. عملکرد و قدرت
  9. Security Model
  10. Software Compatibility Testing
  11. Updatable Software
  12. Document Changelog
  13. با ما تماس بگیرید

12.1. نکات مشاهده لاگ تغییر

Changes are marked as follows:

  • CDD
    Substantive changes to the compatibility requirements.

  • اسناد
    Cosmetic or build related changes.

For best viewing, append the pretty=full and no-merges URL parameters to your changelog URLs.

13. تماس با ما

You can join the android-compatibility forum and ask for clarifications or bring up any issues that you think the document does not cover.