คำจำกัดความความเข้ากันได้ของ Android 9

1. บทนำ

เอกสารนี้ระบุข้อกำหนดที่ต้องปฏิบัติตามเพื่อให้อุปกรณ์เข้ากันได้กับ Android 9

การใช้คำว่า “MUST”, “MUST NOT”, “REQUIRED”, “SHALL”, “SHALL NOT”, “SHOULD”, “SHOULD NOT”, “RECOMMENDED”, “MAY” และ “OPTIONAL” เป็นไปตาม IETF มาตรฐานที่กำหนดใน RFC2119

ตามที่ใช้ในเอกสารนี้ “ผู้ติดตั้งอุปกรณ์” หรือ “ผู้ติดตั้งใช้งาน” คือบุคคลหรือองค์กรที่พัฒนาโซลูชันฮาร์ดแวร์/ซอฟต์แวร์ที่ใช้ Android 9 “การติดตั้งอุปกรณ์” หรือ “การติดตั้งใช้งาน” คือโซลูชันฮาร์ดแวร์/ซอฟต์แวร์ที่ได้รับการพัฒนาดังกล่าว

เพื่อให้ถือว่าเข้ากันได้กับ Android 9 การใช้งานอุปกรณ์จะต้องเป็นไปตามข้อกำหนดที่แสดงในคำจำกัดความความเข้ากันได้นี้ รวมถึงเอกสารใด ๆ ที่รวมอยู่ในการอ้างอิง

ในกรณีที่คำจำกัดความนี้หรือการทดสอบซอฟต์แวร์ที่อธิบายไว้ใน ส่วนที่ 10 ไม่มีการโต้ตอบ ไม่ชัดเจน หรือไม่สมบูรณ์ ถือเป็นความรับผิดชอบของผู้ใช้อุปกรณ์ที่จะต้องแน่ใจว่าเข้ากันได้กับการใช้งานที่มีอยู่

ด้วยเหตุนี้ โครงการ Android Open Source จึงเป็นทั้งข้อมูลอ้างอิงและการใช้งาน Android ที่ต้องการ ผู้ติดตั้งอุปกรณ์ได้รับการแนะนำอย่างยิ่งให้วางฐานการใช้งานไว้ในขอบเขตสูงสุดที่เป็นไปได้ในซอร์สโค้ด "อัปสตรีม" ที่มีอยู่ในโครงการ Android Open Source แม้ว่าส่วนประกอบบางส่วนสามารถถูกแทนที่ด้วยการใช้งานแบบอื่นได้ตามสมมุติฐาน แต่ขอแนะนำอย่างยิ่งว่าอย่าปฏิบัติตามแนวทางปฏิบัตินี้ เนื่องจากการผ่านการทดสอบซอฟต์แวร์จะยากขึ้นอย่างมาก เป็นความรับผิดชอบของผู้ดำเนินการเพื่อให้แน่ใจว่ามีความเข้ากันได้ทางพฤติกรรมอย่างสมบูรณ์กับการใช้งาน Android มาตรฐาน รวมถึงและนอกเหนือจากชุดทดสอบความเข้ากันได้ สุดท้ายนี้ โปรดทราบว่าการทดแทนและการแก้ไขส่วนประกอบบางอย่างไม่ได้รับอนุญาตอย่างชัดเจนในเอกสารนี้

ทรัพยากรจำนวนมากที่เชื่อมโยงในเอกสารนี้ได้มาจาก Android SDK โดยตรงหรือโดยอ้อม และจะมีฟังก์ชันการทำงานเหมือนกับข้อมูลในเอกสารประกอบของ SDK นั้น ในกรณีใดๆ ที่ข้อกำหนดความเข้ากันได้นี้หรือชุดทดสอบความเข้ากันได้ไม่เห็นด้วยกับเอกสารประกอบ SDK เอกสารประกอบ SDK จะถือว่าเชื่อถือได้ รายละเอียดทางเทคนิคใดๆ ที่ให้ไว้ในแหล่งข้อมูลที่เชื่อมโยงตลอดทั้งเอกสารนี้จะถือว่ารวมเป็นส่วนหนึ่งของคำจำกัดความความเข้ากันได้นี้

1.1 โครงสร้างเอกสาร

1.1.1. ข้อกำหนดตามประเภทอุปกรณ์

ส่วนที่ 2 ประกอบด้วยข้อกำหนดทั้งหมดที่ใช้กับอุปกรณ์ประเภทใดประเภทหนึ่ง แต่ละส่วนย่อยของ ส่วนที่ 2 มีไว้สำหรับประเภทอุปกรณ์เฉพาะ

ข้อกำหนดอื่นๆ ทั้งหมดที่นำไปใช้กับการใช้งานอุปกรณ์ Android ในระดับสากลจะแสดงอยู่ในส่วนหลัง ส่วนที่ 2 ข้อกำหนดเหล่านี้เรียกว่า "ข้อกำหนดหลัก" ในเอกสารนี้

1.1.2. รหัสความต้องการ

รหัสความต้องการถูกกำหนดให้กับข้อกำหนด MUST

  • ID ได้รับการกำหนดสำหรับข้อกำหนด MUST เท่านั้น
  • ข้อกำหนดที่แนะนำอย่างยิ่งจะถูกทำเครื่องหมายเป็น [SR] แต่ไม่ได้กำหนด ID
  • รหัสประกอบด้วย : รหัสประเภทอุปกรณ์ - รหัสเงื่อนไข - รหัสความต้องการ (เช่น C-0-1)

แต่ละ ID มีการกำหนดไว้ด้านล่าง:

  • รหัสประเภทอุปกรณ์ (ดูเพิ่มเติมใน 2. ประเภทอุปกรณ์ )
    • C: Core (ข้อกำหนดที่ใช้กับการใช้งานอุปกรณ์ Android ใดๆ)
    • H: อุปกรณ์มือถือ Android
    • T: อุปกรณ์โทรทัศน์ Android
    • ตอบ: การใช้งานยานยนต์ Android
    • แท็บ: การใช้งานแท็บเล็ต Android
  • รหัสเงื่อนไข
    • เมื่อข้อกำหนดไม่มีเงื่อนไข ID นี้จะถูกตั้งค่าเป็น 0
    • เมื่อข้อกำหนดเป็นแบบมีเงื่อนไข ระบบจะกำหนด 1 สำหรับเงื่อนไขที่ 1 และจำนวนจะเพิ่มขึ้นทีละ 1 ภายในส่วนเดียวกันและอุปกรณ์ประเภทเดียวกัน
  • รหัสความต้องการ
    • รหัสนี้เริ่มต้นจาก 1 และเพิ่มขึ้นทีละ 1 ภายในส่วนเดียวกันและเงื่อนไขเดียวกัน

1.1.3. รหัสความต้องการในส่วนที่ 2

รหัสความต้องการใน ส่วนที่ 2 เริ่มต้นด้วยรหัสส่วนที่เกี่ยวข้องซึ่งตามด้วยรหัสความต้องการที่อธิบายไว้ข้างต้น

  • ID ใน ส่วนที่ 2 ประกอบด้วย : Section ID / Device Type ID - Condition ID - Requirement ID (เช่น 7.4.3/A-0-1)

2. ประเภทอุปกรณ์

แม้ว่าโครงการ Android Open Source จะมอบชุดซอฟต์แวร์ที่สามารถใช้กับอุปกรณ์ประเภทและฟอร์มแฟคเตอร์ได้หลากหลาย แต่มีอุปกรณ์บางประเภทที่มีระบบนิเวศการกระจายแอปพลิเคชันที่ค่อนข้างดีกว่า

ส่วนนี้จะอธิบายประเภทอุปกรณ์เหล่านั้น ตลอดจนข้อกำหนดและคำแนะนำเพิ่มเติมที่เกี่ยวข้องกับอุปกรณ์แต่ละประเภท

การใช้งานอุปกรณ์ Android ทั้งหมดที่ไม่สอดคล้องกับประเภทอุปกรณ์ที่อธิบายไว้ใดๆ จะต้องเป็นไปตามข้อกำหนดทั้งหมดในส่วนอื่นๆ ของคำจำกัดความความเข้ากันได้นี้

2.1 การกำหนดค่าอุปกรณ์

สำหรับความแตกต่างที่สำคัญในการกำหนดค่าฮาร์ดแวร์ตามประเภทอุปกรณ์ โปรดดูข้อกำหนดเฉพาะอุปกรณ์ที่ตามมาในส่วนนี้

2.2. ข้อกำหนดเกี่ยวกับมือถือ

อุปกรณ์มือถือ Android หมายถึงการใช้งานอุปกรณ์ Android ที่โดยทั่วไปจะใช้โดยการถือไว้ในมือ เช่น เครื่องเล่น MP3 โทรศัพท์ หรือแท็บเล็ต

การใช้งานอุปกรณ์ Android จะจัดอยู่ในประเภทอุปกรณ์พกพาหากมีคุณสมบัติตรงตามเกณฑ์ต่อไปนี้ทั้งหมด:

  • มีแหล่งพลังงานที่ให้ความคล่องตัว เช่น แบตเตอรี่
  • มีขนาดหน้าจอแนวทแยงในช่วง 2.5 ถึง 8 นิ้ว

ข้อกำหนดเพิ่มเติมในส่วนที่เหลือของส่วนนี้เฉพาะกับการใช้งานอุปกรณ์ Android Handheld

หมายเหตุ: ข้อกำหนดที่ใช้ไม่ได้กับอุปกรณ์แท็บเล็ต Android จะมีเครื่องหมาย * กำกับอยู่

2.2.1. ฮาร์ดแวร์

การใช้งานอุปกรณ์มือถือ:

  • [ 7.1 .1.1/H-0-1] ต้องมีหน้าจอที่มีขนาดเส้นทแยงมุมอย่างน้อย 2.5 นิ้ว
  • [ 7.1 .1.3/H-SR] ได้รับการแนะนำอย่างยิ่งเพื่อให้ผู้ใช้สามารถเปลี่ยนขนาดการแสดงผลได้ (ความหนาแน่นของหน้าจอ)

หากการใช้งานอุปกรณ์มือถืออ้างว่ารองรับการแสดงช่วงไดนามิกสูงผ่าน Configuration.isScreenHdr() พวกเขา:

  • [ 7.1 .4.5/H-1-1] ต้องโฆษณาการสนับสนุนสำหรับส่วนขยาย EGL_EXT_gl_colorspace_bt2020_pq , EGL_EXT_surface_SMPTE2086_metadata , EGL_EXT_surface_CTA861_3_metadata , VK_EXT_swapchain_colorspace และ VK_EXT_hdr_metadata ส่วนขยาย

การใช้งานอุปกรณ์มือถือ:

  • [ 7.1 .5/H-0-1] ต้องมีการสนับสนุนโหมดความเข้ากันได้ของแอปพลิเคชันรุ่นเก่าตามที่นำมาใช้โดยโค้ดโอเพ่นซอร์ส Android อัปสตรีม นั่นคือ การใช้งานอุปกรณ์จะต้องไม่เปลี่ยนแปลงทริกเกอร์หรือเกณฑ์ที่เปิดใช้งานโหมดความเข้ากันได้ และต้องไม่เปลี่ยนแปลงพฤติกรรมของโหมดความเข้ากันได้นั้นเอง
  • [ 7.2 .1/H-0-1] ต้องมีการสนับสนุนสำหรับแอปพลิเคชัน Input Method Editor (IME) ของบริษัทอื่น
  • [ 7.2 .3/H-0-1] ต้องมีฟังก์ชัน Home, ล่าสุด และ Back
  • [ 7.2 .3/H-0-2] ต้องส่งเหตุการณ์การกดทั้งแบบปกติและแบบยาวของฟังก์ชัน Back ( KEYCODE_BACK ) ไปยังแอปพลิเคชันเบื้องหน้า เหตุการณ์เหล่านี้จะต้องไม่ถูกใช้งานโดยระบบและสามารถทริกเกอร์ได้จากภายนอกอุปกรณ์ Android (เช่น แป้นพิมพ์ฮาร์ดแวร์ภายนอกที่เชื่อมต่อกับอุปกรณ์ Android)
  • [ 7.2 .4/H-0-1] ต้องรองรับอินพุตหน้าจอสัมผัส
  • [ 7.2 .4/H-SR] ได้รับการแนะนำอย่างยิ่งให้เปิดแอปช่วยเหลือที่ผู้ใช้เลือก กล่าวคือแอปที่ใช้ VoiceInteractionService หรือกิจกรรมที่จัดการ ACTION_ASSIST เมื่อกด KEYCODE_MEDIA_PLAY_PAUSE ค้างไว้หรือ KEYCODE_HEADSETHOOK หากกิจกรรมเบื้องหน้าไม่ จัดการกับเหตุการณ์ที่กดค้างเหล่านั้น
  • [ 7.3 .1/H-SR] ขอแนะนำอย่างยิ่งให้รวมมาตรความเร่งแบบ 3 แกนไว้ด้วย

หากการใช้งานอุปกรณ์มือถือมีมาตรความเร่งแบบ 3 แกน พวกเขา:

  • [ 7.3 .1/H-1-1] ต้องสามารถรายงานเหตุการณ์ได้ถึงความถี่อย่างน้อย 100 Hz

หากการใช้งานอุปกรณ์มือถือมีไจโรสโคปด้วย พวกเขา:

  • [ 7.3 .4/H-1-1] ต้องสามารถรายงานเหตุการณ์ได้ถึงความถี่อย่างน้อย 100 Hz

การใช้งานอุปกรณ์มือถือที่สามารถโทรออกด้วยเสียงและระบุค่าใดๆ ที่ไม่ใช่ PHONE_TYPE_NONE ใน getPhoneType :

  • [ 7.3 .8/H] ควรมีเซนเซอร์จับความใกล้เคียงด้วย

การใช้งานอุปกรณ์มือถือ:

  • [ 7.3 .12/H-SR] แนะนำให้รองรับเซ็นเซอร์ท่าทางที่มีความอิสระ 6 องศา
  • [ 7.4 .3/H] ควรรองรับ Bluetooth และ Bluetooth LE

หากการใช้งานอุปกรณ์มือถือมีการเชื่อมต่อแบบคิดค่าบริการตามปริมาณข้อมูล พวกเขา:

  • [ 7.4 .7/H-1-1] ต้องมีโหมดประหยัดข้อมูล

การใช้งานอุปกรณ์มือถือ:

  • [ 7.6 .1/H-0-1] ต้องมีที่เก็บข้อมูลแบบไม่ลบเลือนอย่างน้อย 4 GB สำหรับข้อมูลส่วนตัวของแอปพลิเคชัน (หรือที่เรียกว่าพาร์ติชัน "/data")
  • [ 7.6 .1/H-0-2] ต้องส่งคืน "true" สำหรับ ActivityManager.isLowRamDevice() เมื่อมีหน่วยความจำน้อยกว่า 1GB สำหรับเคอร์เนลและพื้นที่ผู้ใช้

หากการใช้งานอุปกรณ์มือถือประกาศรองรับ ABI 32 บิตเท่านั้น:

  • [ 7.6 .1/H-1-1] หน่วยความจำสำหรับเคอร์เนลและพื้นที่ผู้ใช้ต้องมีอย่างน้อย 416MB หากจอแสดงผลเริ่มต้นใช้ความละเอียดเฟรมบัฟเฟอร์สูงถึง qHD (เช่น FWVGA)

  • [ 7.6 .1/H-2-1] หน่วยความจำสำหรับเคอร์เนลและพื้นที่ผู้ใช้ต้องมีอย่างน้อย 592MB หากจอแสดงผลเริ่มต้นใช้ความละเอียดเฟรมบัฟเฟอร์สูงสุด HD+ (เช่น HD, WSVGA)

  • [ 7.6 .1/H-3-1] หน่วยความจำที่มีให้กับเคอร์เนลและพื้นที่ผู้ใช้ต้องมีอย่างน้อย 896MB หากจอแสดงผลเริ่มต้นใช้ความละเอียดเฟรมบัฟเฟอร์สูงถึง FHD (เช่น WSXGA+)

  • [ 7.6 .1/H-4-1] หน่วยความจำที่มีให้กับเคอร์เนลและพื้นที่ผู้ใช้ต้องมีอย่างน้อย 1344MB หากจอแสดงผลเริ่มต้นใช้ความละเอียดเฟรมบัฟเฟอร์สูงถึง QHD (เช่น QWXGA)

หากการใช้งานอุปกรณ์มือถือประกาศรองรับ ABI 64 บิต (มีหรือไม่มี ABI 32 บิต):

  • [ 7.6 .1/H-5-1] หน่วยความจำที่มีให้กับเคอร์เนลและพื้นที่ผู้ใช้ต้องมีอย่างน้อย 816MB หากจอแสดงผลเริ่มต้นใช้ความละเอียดเฟรมบัฟเฟอร์สูงถึง qHD (เช่น FWVGA)

  • [ 7.6 .1/H-6-1] หน่วยความจำสำหรับเคอร์เนลและพื้นที่ผู้ใช้ต้องมีอย่างน้อย 944MB หากจอแสดงผลเริ่มต้นใช้ความละเอียดเฟรมบัฟเฟอร์สูงสุด HD+ (เช่น HD, WSVGA)

  • [ 7.6 .1/H-7-1] หน่วยความจำสำหรับเคอร์เนลและพื้นที่ผู้ใช้ต้องมีอย่างน้อย 1280MB หากจอแสดงผลเริ่มต้นใช้ความละเอียดเฟรมบัฟเฟอร์สูงสุด FHD (เช่น WSXGA+)

  • [ 7.6 .1/H-8-1] หน่วยความจำที่มีให้กับเคอร์เนลและพื้นที่ผู้ใช้ต้องมีอย่างน้อย 1824MB หากจอแสดงผลเริ่มต้นใช้ความละเอียดเฟรมบัฟเฟอร์สูงถึง QHD (เช่น QWXGA)

โปรดทราบว่า "หน่วยความจำที่มีให้สำหรับเคอร์เนลและพื้นที่ผู้ใช้" ข้างต้นหมายถึงพื้นที่หน่วยความจำที่จัดเตรียมไว้ให้ นอกเหนือจากหน่วยความจำใดๆ ที่ทุ่มเทให้กับส่วนประกอบฮาร์ดแวร์อยู่แล้ว เช่น วิทยุ วิดีโอ และอื่นๆ ที่ไม่อยู่ภายใต้การควบคุมของเคอร์เนลในการใช้งานอุปกรณ์

หากการใช้งานอุปกรณ์มือถือมีหน่วยความจำน้อยกว่าหรือเท่ากับ 1GB สำหรับเคอร์เนลและพื้นที่ผู้ใช้ พวกเขา:

  • [ 7.6 .1/H-9-1] ต้องประกาศคุณลักษณะ flag android.hardware.ram.low
  • [ 7.6 .1/H-9-2] ต้องมีที่เก็บข้อมูลแบบไม่ลบเลือนอย่างน้อย 1.1 GB สำหรับข้อมูลส่วนตัวของแอปพลิเคชัน (หรือที่เรียกว่าพาร์ติชัน "/data")

หากการใช้งานอุปกรณ์มือถือมีหน่วยความจำมากกว่า 1GB สำหรับเคอร์เนลและพื้นที่ผู้ใช้ พวกเขา:

  • [ 7.6 .1/H-10-1] ต้องมีที่เก็บข้อมูลแบบไม่ลบเลือนอย่างน้อย 4GB สำหรับข้อมูลส่วนตัวของแอปพลิเคชัน (หรือที่เรียกว่าพาร์ติชัน "/data")
  • ควรประกาศคุณลักษณะสถานะ android.hardware.ram.normal

การใช้งานอุปกรณ์มือถือ:

  • [ 7.6 .2/H-0-1] ต้องไม่จัดเตรียมพื้นที่เก็บข้อมูลที่ใช้ร่วมกันของแอปพลิเคชันที่มีขนาดเล็กกว่า 1 GiB
  • [ 7.7 .1/H] ควรมีพอร์ต USB ที่รองรับโหมดอุปกรณ์ต่อพ่วงด้วย

หากการใช้งานอุปกรณ์พกพามีพอร์ต USB ที่รองรับโหมดอุปกรณ์ต่อพ่วง พวกเขา:

  • [ 7.7 .1/H-1-1] ต้องใช้ Android Open Accessory (AOA) API

การใช้งานอุปกรณ์มือถือ:

  • [ 7.8 .1/H-0-1] ต้องมีไมโครโฟนด้วย
  • [ 7.8 .2/H-0-1] ต้องมีเอาต์พุตเสียงและประกาศ android.hardware.audio.output

หากการใช้งานอุปกรณ์มือถือสามารถตอบสนองความต้องการด้านประสิทธิภาพทั้งหมดสำหรับการรองรับโหมด VR และรวมถึงการรองรับด้วย พวกเขา:

  • [ 7.9 .1/H-1-1] ต้องประกาศคุณสมบัติ android.hardware.vr.high_performance
  • [ 7.9 .1/H-1-2] ต้องมีแอปพลิเคชันที่ใช้ android.service.vr.VrListenerService ซึ่งสามารถเปิดใช้งานได้โดยแอปพลิเคชัน VR ผ่านทาง android.app.Activity#setVrModeEnabled

2.2.2. มัลติมีเดีย

การใช้งานอุปกรณ์มือถือต้องรองรับการเข้ารหัสเสียงต่อไปนี้:

  • [ 5.1 .1/H-0-1] AMR-NB
  • [ 5.1 .1/H-0-2] AMR-WB
  • [ 5.1 .1/H-0-3] โปรไฟล์ MPEG-4 AAC (AAC LC)
  • [ 5.1 .1/H-0-4] โปรไฟล์ MPEG-4 HE AAC (AAC+)
  • [ 5.1 .1/H-0-5] AAC ELD (ปรับปรุง AAC ความล่าช้าต่ำ)

การใช้งานอุปกรณ์มือถือต้องรองรับการถอดรหัสเสียงต่อไปนี้:

  • [ 5.1 .2/H-0-1] AMR-NB
  • [ 5.1 .2/H-0-2] AMR-WB

การใช้งานอุปกรณ์มือถือต้องรองรับการเข้ารหัสวิดีโอต่อไปนี้และทำให้สามารถใช้งานได้กับแอปพลิเคชันบุคคลที่สาม:

  • [ 5.2 /H-0-1] H.264 AVC
  • [ 5.2 /H-0-2] VP8

การใช้งานอุปกรณ์มือถือต้องรองรับการถอดรหัสวิดีโอต่อไปนี้:

  • [ 5.3 /H-0-1] H.264 AVC
  • [ 5.3 /H-0-2] H.265 HEVC
  • [ 5.3 /H-0-3] MPEG-4 SP
  • [ 5.3 /H-0-4] VP8
  • [ 5.3 /H-0-5] VP9

2.2.3. ซอฟต์แวร์

การใช้งานอุปกรณ์มือถือ:

  • [ 3.2.3.1 /H-0-1] ต้องมีแอปพลิเคชันที่จัดการ ACTION_GET_CONTENT , ACTION_OPEN_DOCUMENT , ACTION_OPEN_DOCUMENT_TREE และ ACTION_CREATE_DOCUMENT เจตนาตามที่อธิบายไว้ในเอกสาร SDK และให้ความสะดวกแก่ผู้ใช้ในการเข้าถึงข้อมูลผู้ให้บริการเอกสารโดยใช้ DocumentsProvider API
  • [ 3.4 .1/H-0-1] ต้องมีการใช้งาน android.webkit.Webview API โดยสมบูรณ์
  • [ 3.4 .2/H-0-1] ต้องมีแอปพลิเคชันเบราว์เซอร์แบบสแตนด์อโลนสำหรับการท่องเว็บของผู้ใช้ทั่วไป
  • [ 3.8 .1/H-SR] ขอแนะนำอย่างยิ่งให้ใช้ตัวเรียกใช้งานเริ่มต้นที่รองรับการปักหมุดทางลัด วิดเจ็ต และ ฟีเจอร์วิดเจ็ต ในแอป
  • [ 3.8 .1/H-SR] ขอแนะนำอย่างยิ่งให้ใช้ตัวเรียกใช้งานเริ่มต้นที่ให้การเข้าถึงทางลัดเพิ่มเติมอย่างรวดเร็วโดยแอปบุคคลที่สามผ่าน ShortcutManager API
  • [ 3.8 .1/H-SR] ขอแนะนำอย่างยิ่งให้รวมแอป Launcher เริ่มต้นที่แสดงป้ายสำหรับไอคอนแอป
  • [ 3.8 .2/H-SR] ขอแนะนำอย่างยิ่งให้รองรับวิดเจ็ตแอปบุคคลที่สาม
  • [ 3.8 .3/H-0-1] ต้องอนุญาตให้แอปของบุคคลที่สามแจ้งเตือนผู้ใช้เกี่ยวกับเหตุการณ์สำคัญผ่านคลาส API Notification และ NotificationManager
  • [ 3.8 .3/H-0-2] ต้องรองรับการแจ้งเตือนที่หลากหลาย
  • [ 3.8 .3/H-0-3] ต้องรองรับการแจ้งเตือนล่วงหน้า
  • [ 3.8 .3/H-0-4] ต้องมีหน้าต่างแจ้งเตือน เพื่อให้ผู้ใช้สามารถควบคุมได้โดยตรง (เช่น ตอบกลับ เลื่อน ยกเลิก บล็อก) การแจ้งเตือนผ่านช่องทางที่ผู้ใช้จ่ายได้ เช่น ปุ่มการดำเนินการ หรือแผงควบคุมตามที่นำมาใช้ ใน อสป.
  • [ 3.8 .3/H-0-5] ต้องแสดงตัวเลือกที่มีให้ผ่าน RemoteInput.Builder setChoices() ในหน้าต่างแจ้งเตือน
  • [ 3.8 .3/H-SR] ได้รับการแนะนำอย่างยิ่งให้แสดงตัวเลือกแรกที่ให้ไว้ผ่าน RemoteInput.Builder setChoices() ในหน้าต่างแจ้งเตือนโดยไม่ต้องมีการโต้ตอบกับผู้ใช้เพิ่มเติม
  • [ 3.8 .3/H-SR] ได้รับการแนะนำอย่างยิ่งให้แสดงตัวเลือกทั้งหมดที่มีให้ผ่าน RemoteInput.Builder setChoices() ในหน้าต่างแจ้งเตือนเมื่อผู้ใช้ขยายการแจ้งเตือนทั้งหมดในหน้าต่างแจ้งเตือน
  • [ 3.8 .4/H-SR] ขอแนะนำอย่างยิ่งให้ใช้ตัวช่วยบนอุปกรณ์เพื่อจัดการกับ การดำเนินการ Assist

หากการใช้งานอุปกรณ์มือถือรองรับการดำเนินการ Assist พวกเขา:

  • [ 3.8 .4/H-SR] ขอแนะนำอย่างยิ่งให้ใช้การกดปุ่ม HOME ค้างไว้เป็นการโต้ตอบที่กำหนดเพื่อเปิดแอปช่วยเหลือตามที่อธิบายไว้ใน ส่วน 7.2.3 ต้องเปิดแอปช่วยเหลือที่ผู้ใช้เลือก กล่าวคือแอปที่ใช้ VoiceInteractionService หรือกิจกรรมที่จัดการจุดประสงค์ ACTION_ASSIST

หากการใช้งานอุปกรณ์ Android Handheld รองรับหน้าจอล็อค พวกเขา:

  • [ 3.8 .10/H-1-1] ต้องแสดงการแจ้งเตือนหน้าจอล็อค รวมถึงเทมเพลตการแจ้งเตือนสื่อ

หากการใช้งานอุปกรณ์มือถือรองรับหน้าจอล็อคที่ปลอดภัย พวกเขา:

  • [ 3.9 /H-1-1] ต้องใช้นโยบาย การดูแลระบบอุปกรณ์ อย่างเต็มรูปแบบที่กำหนดไว้ในเอกสารประกอบ Android SDK
  • [ 3.9 /H-1-2] ต้องประกาศการสนับสนุนโปรไฟล์ที่ได้รับการจัดการผ่านทางแฟล็กคุณลักษณะ android.software.managed_users ยกเว้นเมื่ออุปกรณ์ได้รับการกำหนดค่าให้ รายงาน ตัวเองว่าเป็นอุปกรณ์ RAM เหลือน้อย หรือเพื่อจัดสรรภายใน ( ที่เก็บข้อมูลที่ไม่สามารถถอดออกได้) เป็นที่เก็บข้อมูลที่ใช้ร่วมกัน

การใช้งานอุปกรณ์มือถือ:

  • [ 3.10 /H-0-1] ต้องรองรับบริการการเข้าถึงของบุคคลที่สาม
  • [ 3.10 /H-SR] ขอแนะนำอย่างยิ่งให้โหลดบริการการเข้าถึงล่วงหน้าบนอุปกรณ์ที่เทียบได้กับหรือเกินกว่าฟังก์ชันการทำงานของการเข้าถึงด้วยสวิตช์และ TalkBack (สำหรับภาษาที่รองรับโดยเครื่องมืออ่านออกเสียงข้อความที่ติดตั้งไว้ล่วงหน้า) บริการการเข้าถึงตามที่ระบุไว้ใน talkback ที่เปิดอยู่ โครงการต้นทาง
  • [ 3.11 /H-0-1] ต้องรองรับการติดตั้งเอ็นจิ้น TTS ของบุคคลที่สาม
  • [ 3.11 /H-SR] ขอแนะนำอย่างยิ่งให้รวมเครื่องมือ TTS ที่รองรับภาษาที่มีอยู่ในอุปกรณ์
  • [ 3.13 /H-SR] ขอแนะนำอย่างยิ่งให้รวมองค์ประกอบ UI การตั้งค่าด่วน

หากการใช้งานอุปกรณ์มือถือ Android ประกาศรองรับ FEATURE_BLUETOOTH หรือ FEATURE_WIFI พวกเขา:

  • [ 3.16 /H-1-1] ต้องรองรับคุณสมบัติการจับคู่อุปกรณ์คู่หู

2.2.4. ประสิทธิภาพและพลัง

  • [ 8.1 /H-0-1] เวลาแฝงของเฟรมที่สม่ำเสมอ เวลาในการตอบสนองของเฟรมไม่สอดคล้องกันหรือความล่าช้าในการแสดงผลเฟรมต้องไม่เกิดขึ้นบ่อยกว่า 5 เฟรมในหนึ่งวินาที และควรต่ำกว่า 1 เฟรมในหนึ่งวินาที
  • [ 8.1 /H-0-2] เวลาแฝงของอินเทอร์เฟซผู้ใช้ การใช้งานอุปกรณ์ต้องรับประกันประสบการณ์ผู้ใช้ที่มีเวลาแฝงต่ำโดยการเลื่อนรายการรายการ 10,000 รายการตามที่กำหนดโดยชุดทดสอบความเข้ากันได้ของ Android (CTS) ในเวลาน้อยกว่า 36 วินาที
  • [ 8.1 /H-0-3] การสลับงาน เมื่อมีการเปิดใช้งานหลายแอปพลิเคชัน การเปิดใช้งานแอปพลิเคชันที่ทำงานอยู่แล้วอีกครั้งหลังจากเปิดตัวแล้วจะต้องใช้เวลาน้อยกว่า 1 วินาที

การใช้งานอุปกรณ์มือถือ:

  • [ 8.2 /H-0-1] ต้องแน่ใจว่าประสิทธิภาพการเขียนตามลำดับอย่างน้อย 5 MB/s
  • [ 8.2 /H-0-2] ต้องแน่ใจว่าประสิทธิภาพการเขียนแบบสุ่มอย่างน้อย 0.5 MB/s
  • [ 8.2 /H-0-3] ต้องรับประกันประสิทธิภาพการอ่านตามลำดับอย่างน้อย 15 MB/s
  • [ 8.2 /H-0-4] ต้องรับประกันประสิทธิภาพการอ่านแบบสุ่มอย่างน้อย 3.5 MB/s

หากการใช้งานอุปกรณ์มือถือมีคุณสมบัติเพื่อปรับปรุงการจัดการพลังงานของอุปกรณ์ที่รวมอยู่ใน AOSP หรือขยายคุณสมบัติที่รวมอยู่ใน AOSP พวกเขา:

  • [ 8.3 /H-1-1] ต้องให้เงินแก่ผู้ใช้ในการเปิดใช้งานและปิดใช้งานคุณสมบัติประหยัดแบตเตอรี่
  • [ 8.3 /H-1-2] ต้องให้สิทธิ์ผู้ใช้ในการแสดงแอปทั้งหมดที่ได้รับการยกเว้นจากโหมดสแตนด์บายแอปและโหมดประหยัดพลังงาน Doze

การใช้งานอุปกรณ์มือถือ:

  • [ 8.4 /H-0-1] ต้องจัดเตรียมโปรไฟล์พลังงานต่อส่วนประกอบที่กำหนด ค่าการใช้ปัจจุบัน สำหรับส่วนประกอบฮาร์ดแวร์แต่ละชิ้น และการสิ้นเปลืองแบตเตอรี่โดยประมาณที่เกิดจากส่วนประกอบต่างๆ ในช่วงเวลาหนึ่งตามที่บันทึกไว้ในไซต์โครงการ Android Open Source
  • [ 8.4 /H-0-2] ต้องรายงานค่าการใช้พลังงานทั้งหมดเป็นมิลลิแอมแปร์ชั่วโมง (mAh)
  • [ 8.4 /H-0-3] ต้องรายงานการใช้พลังงานของ CPU ต่อ UID ของแต่ละกระบวนการ โครงการ Android Open Source ตรงตามข้อกำหนดผ่านการใช้งานโมดูลเคอร์เนล uid_cputime
  • [ 8.4 /H-0-4] ต้องทำให้การใช้พลังงานนี้ใช้งานได้ผ่านคำสั่งเชลล์ adb shell dumpsys batterystats ไปยังนักพัฒนาแอป
  • [ 8.4 /H] ควรนำมาประกอบกับส่วนประกอบฮาร์ดแวร์เอง หากไม่สามารถระบุการใช้พลังงานของส่วนประกอบฮาร์ดแวร์ให้กับแอปพลิเคชันได้

หากการใช้งานอุปกรณ์มือถือมีเอาต์พุตหน้าจอหรือวิดีโอ พวกเขา:

  • [ 8.4 /H-1-1] ต้องเคารพเจตนาของ android.intent.action.POWER_USAGE_SUMMARY และแสดงเมนูการตั้งค่าที่แสดงการใช้พลังงานนี้

2.2.5. รูปแบบการรักษาความปลอดภัย

การใช้งานอุปกรณ์มือถือ:

  • [ 9.1 /H-0-1] ต้องอนุญาตให้แอปของบุคคลที่สามเข้าถึงสถิติการใช้งานผ่าน android.permission.PACKAGE_USAGE_STATS และจัดเตรียมกลไกที่ผู้ใช้สามารถเข้าถึงได้เพื่อให้หรือเพิกถอนการเข้าถึงแอปดังกล่าวเพื่อตอบสนองต่อ android.settings.ACTION_USAGE_ACCESS_SETTINGS เจตนา android.settings.ACTION_USAGE_ACCESS_SETTINGS

เมื่อการใช้งานอุปกรณ์มือถือรองรับหน้าจอล็อคที่ปลอดภัย พวกเขา:

  • [ 9.11 /H-1-1] ต้องอนุญาตให้ผู้ใช้เลือกการหมดเวลาพักเครื่องที่สั้นที่สุด นั่นคือเวลาเปลี่ยนจากสถานะปลดล็อคเป็นสถานะล็อค โดยอยู่ที่ 15 วินาทีหรือน้อยกว่า
  • [ 9.11 /H-1-2] ต้องให้สิทธิ์ผู้ใช้ในการซ่อนการแจ้งเตือนและปิดการใช้งานการรับรองความถูกต้องทุกรูปแบบ ยกเว้นการรับรองความถูกต้องหลักที่อธิบายไว้ใน 9.11.1 Secure Lock Screen AOSP ตรงตามข้อกำหนดในโหมดล็อคดาวน์

2.3. ข้อกำหนดด้านโทรทัศน์

อุปกรณ์โทรทัศน์ Android หมายถึงการใช้งานอุปกรณ์ Android ที่เป็นอินเทอร์เฟซความบันเทิงสำหรับการบริโภคสื่อดิจิทัล ภาพยนตร์ เกม แอป และ/หรือรายการสดทางทีวีสำหรับผู้ใช้ที่นั่งอยู่ห่างออกไปประมาณ 10 ฟุต (ผู้ใช้ "เอนหลัง" หรือ "ผู้ใช้ 10 ฟุต" อินเตอร์เฟซ").

การใช้งานอุปกรณ์ Android จะจัดเป็นโทรทัศน์หากมีคุณสมบัติตรงตามเกณฑ์ต่อไปนี้ทั้งหมด:

  • ได้จัดให้มีกลไกในการควบคุมอินเทอร์เฟซผู้ใช้ที่แสดงผลบนจอแสดงผลจากระยะไกลซึ่งอาจอยู่ห่างจากผู้ใช้สิบฟุต
  • มีจอแสดงผลแบบฝังที่มีความยาวแนวทแยงใหญ่กว่า 24 นิ้ว หรือมีพอร์ตเอาต์พุตวิดีโอ เช่น VGA, HDMI, DisplayPort หรือพอร์ตไร้สายสำหรับการแสดงผล

ข้อกำหนดเพิ่มเติมในส่วนที่เหลือของส่วนนี้เฉพาะกับการใช้งานอุปกรณ์ Android Television

2.3.1. ฮาร์ดแวร์

การใช้งานอุปกรณ์โทรทัศน์:

  • [ 7.2 .2/T-0-1] ต้องรองรับ D-pad
  • [ 7.2 .3/T-0-1] ต้องมีฟังก์ชัน Home และ Back
  • [ 7.2 .3/T-0-2] ต้องส่งเหตุการณ์การกดทั้งแบบปกติและแบบยาวของฟังก์ชัน Back ( KEYCODE_BACK ) ไปยังแอปพลิเคชันเบื้องหน้า
  • [ 7.2 .6.1/T-0-1] จะต้องรองรับคอนโทรลเลอร์เกมและประกาศคุณสมบัติ android.hardware.gamepad
  • [ 7.2 .7/T] ควรจัดให้มีรีโมทคอนโทรลซึ่งผู้ใช้สามารถเข้าถึง การนำทางแบบไม่สัมผัส และ อินพุตปุ่มนำทางหลัก ได้

หากการใช้งานอุปกรณ์โทรทัศน์มีไจโรสโคปด้วย พวกเขาจะ:

  • [ 7.3 .4/T-1-1] ต้องสามารถรายงานเหตุการณ์ได้ถึงความถี่อย่างน้อย 100 Hz

การใช้งานอุปกรณ์โทรทัศน์:

  • [ 7.4 .3/T-0-1] ต้องรองรับ Bluetooth และ Bluetooth LE
  • [ 7.6 .1/T-0-1] ต้องมีที่เก็บข้อมูลแบบไม่ลบเลือนอย่างน้อย 4 GB สำหรับข้อมูลส่วนตัวของแอปพลิเคชัน (หรือที่เรียกว่าพาร์ติชัน "/data")

หากการใช้งานอุปกรณ์โทรทัศน์มีพอร์ต USB ที่รองรับโหมดโฮสต์ พวกเขา:

  • [ 7.5 .3/T-1-1] จะต้องรองรับกล้องภายนอกที่เชื่อมต่อผ่านพอร์ต USB นี้ แต่ไม่จำเป็นต้องเชื่อมต่อตลอดเวลา

ถ้าหากการใช้งานอุปกรณ์ทีวีเป็นแบบ 32 บิต:

  • [ 7.6 .1/T-1-1] หน่วยความจำที่มีให้กับเคอร์เนลและพื้นที่ผู้ใช้ต้องมีอย่างน้อย 896MB หากใช้ความหนาแน่นต่อไปนี้:

    • 400dpi หรือสูงกว่าบนหน้าจอขนาดเล็ก/ปกติ
    • xhdpi หรือสูงกว่าบนหน้าจอขนาดใหญ่
    • tvdpi หรือสูงกว่าบนหน้าจอขนาดใหญ่พิเศษ

ถ้าหากการใช้งานอุปกรณ์ทีวีเป็นแบบ 64 บิต:

  • [ 7.6 .1/T-2-1] หน่วยความจำที่มีให้กับเคอร์เนลและพื้นที่ผู้ใช้ต้องมีอย่างน้อย 1280MB หากใช้ความหนาแน่นต่อไปนี้:

    • 400dpi หรือสูงกว่าบนหน้าจอขนาดเล็ก/ปกติ
    • xhdpi หรือสูงกว่าบนหน้าจอขนาดใหญ่
    • tvdpi หรือสูงกว่าบนหน้าจอขนาดใหญ่พิเศษ

โปรดทราบว่า "หน่วยความจำที่มีให้สำหรับเคอร์เนลและพื้นที่ผู้ใช้" ข้างต้นหมายถึงพื้นที่หน่วยความจำที่จัดเตรียมไว้ให้ นอกเหนือจากหน่วยความจำใดๆ ที่ทุ่มเทให้กับส่วนประกอบฮาร์ดแวร์อยู่แล้ว เช่น วิทยุ วิดีโอ และอื่นๆ ที่ไม่อยู่ภายใต้การควบคุมของเคอร์เนลในการใช้งานอุปกรณ์

การใช้งานอุปกรณ์โทรทัศน์:

  • [ 7.8 .1/T] ควรมีไมโครโฟนด้วย
  • [ 7.8 .2/T-0-1] ต้องมีเอาต์พุตเสียงและประกาศ android.hardware.audio.output

2.3.2. มัลติมีเดีย

การใช้งานอุปกรณ์โทรทัศน์จะต้องรองรับรูปแบบการเข้ารหัสเสียงต่อไปนี้:

  • [ 5.1 /T-0-1] โปรไฟล์ MPEG-4 AAC (AAC LC)
  • [ 5.1 /T-0-2] โปรไฟล์ MPEG-4 HE AAC (AAC+)
  • [ 5.1 /T-0-3] AAC ELD (ปรับปรุง AAC ความล่าช้าต่ำ)

การใช้งานอุปกรณ์โทรทัศน์จะต้องรองรับรูปแบบการเข้ารหัสวิดีโอต่อไปนี้:

  • [ 5.2 /T-0-1] H.264
  • [ 5.2 /T-0-2] VP8

การใช้งานอุปกรณ์โทรทัศน์:

  • [ 5.2 .2/T-SR] ขอแนะนำอย่างยิ่งให้รองรับการเข้ารหัส H.264 ของวิดีโอความละเอียด 720p และ 1080p ที่ 30 เฟรมต่อวินาที

การใช้งานอุปกรณ์โทรทัศน์จะต้องรองรับรูปแบบการถอดรหัสวิดีโอต่อไปนี้:

ขอแนะนำอย่างยิ่งให้ใช้งานอุปกรณ์โทรทัศน์เพื่อรองรับรูปแบบการถอดรหัสวิดีโอต่อไปนี้:

การใช้งานอุปกรณ์โทรทัศน์ต้องรองรับการถอดรหัส H.264 ดังรายละเอียดในส่วน 5.3.4 ที่อัตราเฟรมวิดีโอมาตรฐานและความละเอียดสูงสุดและรวมถึง:

  • [ 5.3.4 .4/T-1-1] HD 1080p ที่ 60 เฟรมต่อวินาทีพร้อม Basline Profile
  • [ 5.3.4 .4/T-1-2] HD 1080p ที่ 60 เฟรมต่อวินาทีด้วยโปรไฟล์หลัก
  • [ 5.3.4 .4/T-1-3] HD 1080p ที่ 60 เฟรมต่อวินาทีด้วย High Profile Level 4.2

การใช้งานอุปกรณ์โทรทัศน์ที่มีตัวถอดรหัสฮาร์ดแวร์ H.265 ต้องรองรับการถอดรหัส H.265 ดังรายละเอียดในส่วน 5.3.5 ที่อัตราเฟรมวิดีโอมาตรฐานและความละเอียดสูงสุดและรวมถึง:

  • [ 5.3.5 .4/T-1-1] HD 1080p ที่ 60 เฟรมต่อวินาที ด้วยโปรไฟล์หลักระดับ 4.1

หากการใช้งานอุปกรณ์โทรทัศน์ที่มีตัวถอดรหัสฮาร์ดแวร์ H.265 รองรับการถอดรหัส H.265 และโปรไฟล์การถอดรหัส UHD พวกเขา:

  • [ 5.3.5 .5/T-2-1] ต้องรองรับโปรไฟล์การถอดรหัส UHD ที่ 60 เฟรมต่อวินาทีด้วยโปรไฟล์ Main Tier ระดับ 5 Main10

การใช้งานอุปกรณ์โทรทัศน์ต้องรองรับการถอดรหัส VP8 ตามรายละเอียดในส่วน 5.3.6 ที่อัตราเฟรมวิดีโอมาตรฐานและความละเอียดสูงสุดและรวมถึง:

  • [ 5.3.6 .4/T-1-1] โปรไฟล์การถอดรหัส HD 1080p ที่ 60 เฟรมต่อวินาที

การใช้งานอุปกรณ์โทรทัศน์ที่มีตัวถอดรหัสฮาร์ดแวร์ VP9 ต้องรองรับการถอดรหัส VP9 ดังรายละเอียดในส่วน 5.3.7 ที่อัตราเฟรมวิดีโอมาตรฐานและความละเอียดสูงสุดและรวมถึง:

  • [ 5.3.7 .4/T-1-1] HD 1080p ที่ 60 เฟรมต่อวินาทีพร้อมโปรไฟล์ 0 (ความลึกของสี 8 บิต)

หากการใช้งานอุปกรณ์โทรทัศน์ที่มีตัวถอดรหัสฮาร์ดแวร์ VP9 รองรับการถอดรหัส VP9 และโปรไฟล์การถอดรหัส UHD พวกเขา:

  • [ 5.3.7 .5/T-2-1] ต้องรองรับโปรไฟล์การถอดรหัส UHD ที่ 60 เฟรมต่อวินาทีด้วยโปรไฟล์ 0 (ความลึกของสี 8 บิต)
  • [ 5.3.7 .5/T-2-1] ขอแนะนำอย่างยิ่งให้รองรับโปรไฟล์การถอดรหัส UHD ที่ 60 เฟรมต่อวินาทีด้วยโปรไฟล์ 2 (ความลึกของสี 10 บิต)

การใช้งานอุปกรณ์โทรทัศน์:

  • [ 5.5 .3/T-0-1] ต้องมีการสนับสนุนสำหรับระดับเสียงหลักของระบบและการลดทอนระดับเสียงเอาต์พุตเสียงดิจิทัลบนเอาต์พุตที่รองรับ ยกเว้นเอาต์พุตพาสทรูเสียงที่ถูกบีบอัด (โดยที่ไม่มีการถอดรหัสเสียงบนอุปกรณ์)
  • [ 5.8 /T-0-1] ต้องตั้งค่าโหมดเอาต์พุต HDMI เพื่อเลือกความละเอียดสูงสุดที่สามารถรองรับด้วยอัตราการรีเฟรช 50Hz หรือ 60Hz สำหรับจอแสดงผลแบบใช้สายทั้งหมด
  • [ 5.8 /T-SR] ขอแนะนำอย่างยิ่งให้มีตัวเลือกอัตรารีเฟรช HDMI ที่ผู้ใช้สามารถกำหนดค่าได้สำหรับจอแสดงผลแบบมีสายทั้งหมด
  • [ 5.8 /T-SR] ได้รับการแนะนำอย่างยิ่งเพื่อรองรับการถอดรหัสสตรีมที่ปลอดภัยพร้อมกัน อย่างน้อยที่สุด ขอแนะนำอย่างยิ่งให้ถอดรหัสสองไอน้ำพร้อมกัน
  • [ 5.8 ] ควรตั้งค่าอัตรารีเฟรชของโหมดเอาต์พุต HDMI เป็น 50Hz หรือ 60Hz ขึ้นอยู่กับอัตรารีเฟรชวิดีโอสำหรับภูมิภาคที่จำหน่ายอุปกรณ์สำหรับจอแสดงผลแบบมีสายทั้งหมด

หากการใช้งานอุปกรณ์โทรทัศน์รองรับการถอดรหัส UHD และรองรับจอแสดงผลภายนอก พวกเขา:

  • [ 5.8 /T-1-1] ต้องรองรับ HDCP 2.2

หากการใช้งานอุปกรณ์โทรทัศน์ไม่รองรับการถอดรหัส UHD แต่รองรับจอแสดงผลภายนอก พวกเขา:

  • [ 5.8 /T-2-1] ต้องรองรับ HDCP 1.4

2.3.3. ซอฟต์แวร์

การใช้งานอุปกรณ์โทรทัศน์:

  • [ 3 /T-0-1] ต้องประกาศคุณสมบัติ android.software.leanback และ android.hardware.type.television
  • [ 3.4 .1/T-0-1] ต้องมีการใช้งาน android.webkit.Webview API โดยสมบูรณ์

หากการใช้งานอุปกรณ์ Android Television รองรับหน้าจอล็อค พวกเขา:

  • [ 3.8 .10/T-1-1] ต้องแสดงการแจ้งเตือนหน้าจอล็อค รวมถึงเทมเพลตการแจ้งเตือนสื่อ

การใช้งานอุปกรณ์โทรทัศน์:

  • [ 3.8 .14/T-SR] ขอแนะนำอย่างยิ่งให้รองรับโหมดหลายหน้าต่างในโหมดภาพซ้อนภาพ (PIP)
  • [ 3.10 /T-0-1] ต้องรองรับบริการการเข้าถึงของบุคคลที่สาม
  • [ 3.10 /T-SR] ขอแนะนำอย่างยิ่งให้โหลดบริการการเข้าถึงล่วงหน้าบนอุปกรณ์ที่เทียบได้กับหรือเกินกว่าฟังก์ชันของการเข้าถึงด้วยสวิตช์และ TalkBack (สำหรับภาษาที่รองรับโดยเครื่องมืออ่านออกเสียงข้อความที่ติดตั้งไว้ล่วงหน้า) บริการการเข้าถึงตามที่ระบุไว้ใน talkback ที่เปิดอยู่ โครงการต้นทาง

หากการใช้งานอุปกรณ์โทรทัศน์รายงานคุณลักษณะ android.hardware.audio.output พวกเขา:

  • [ 3.11 /T-SR] ขอแนะนำอย่างยิ่งให้รวมเอ็นจิ้น TTS ที่รองรับภาษาที่มีอยู่ในอุปกรณ์
  • [ 3.11 /T-1-1] ต้องรองรับการติดตั้งเอ็นจิ้น TTS ของบุคคลที่สาม

การใช้งานอุปกรณ์โทรทัศน์:

  • [ 3.12 /T-0-1] ต้องรองรับ TV Input Framework

2.3.4. ประสิทธิภาพและพลัง

  • [ 8.1 /T-0-1] เวลาแฝงของเฟรมที่สม่ำเสมอ เวลาในการตอบสนองของเฟรมไม่สอดคล้องกันหรือความล่าช้าในการแสดงผลเฟรมต้องไม่เกิดขึ้นบ่อยกว่า 5 เฟรมในหนึ่งวินาที และควรต่ำกว่า 1 เฟรมในหนึ่งวินาที
  • [ 8.2 /T-0-1] ต้องแน่ใจว่าประสิทธิภาพการเขียนตามลำดับอย่างน้อย 5MB/s
  • [ 8.2 /T-0-2] ต้องแน่ใจว่าประสิทธิภาพการเขียนแบบสุ่มอย่างน้อย 0.5MB/s
  • [ 8.2 /T-0-3] ต้องรับประกันประสิทธิภาพการอ่านตามลำดับอย่างน้อย 15MB/s
  • [ 8.2 /T-0-4] ต้องรับประกันประสิทธิภาพการอ่านแบบสุ่มอย่างน้อย 3.5MB/s

หากการใช้งานอุปกรณ์โทรทัศน์มีคุณสมบัติเพื่อปรับปรุงการจัดการพลังงานของอุปกรณ์ที่รวมอยู่ใน AOSP หรือขยายคุณสมบัติที่รวมอยู่ใน AOSP พวกเขา:

  • [ 8.3 /T-1-1] ต้องให้เงินแก่ผู้ใช้ในการเปิดใช้งานและปิดใช้งานคุณสมบัติประหยัดแบตเตอรี่
  • [ 8.3 /T-1-2] ต้องให้สิทธิ์ผู้ใช้ในการแสดงแอปทั้งหมดที่ได้รับการยกเว้นจากโหมดสแตนด์บายแอปและโหมดประหยัดพลังงาน Doze

การใช้งานอุปกรณ์โทรทัศน์:

  • [ 8.4 /T-0-1] ต้องจัดเตรียมโปรไฟล์พลังงานต่อองค์ประกอบที่กำหนด ค่าการใช้ปัจจุบัน สำหรับส่วนประกอบฮาร์ดแวร์แต่ละชิ้น และการสิ้นเปลืองแบตเตอรี่โดยประมาณที่เกิดจากส่วนประกอบต่างๆ ในช่วงเวลาหนึ่งตามที่บันทึกไว้ในไซต์โครงการ Android Open Source
  • [ 8.4 /T-0-2] ต้องรายงานค่าการใช้พลังงานทั้งหมดเป็นมิลลิแอมแปร์ชั่วโมง (mAh)
  • [ 8.4 /T-0-3] ต้องรายงานการใช้พลังงานของ CPU ต่อ UID ของแต่ละกระบวนการ โครงการ Android Open Source ตรงตามข้อกำหนดผ่านการใช้งานโมดูลเคอร์เนล uid_cputime
  • [ 8.4 /T] ควรนำมาประกอบกับส่วนประกอบฮาร์ดแวร์เอง หากไม่สามารถระบุการใช้พลังงานของส่วนประกอบฮาร์ดแวร์ให้กับแอปพลิเคชันได้
  • [ 8.4 /T-0-4] ต้องทำให้การใช้พลังงานนี้พร้อมใช้งานผ่านคำสั่งเชลล์ adb shell dumpsys batterystats ไปยังนักพัฒนาแอป

2.4. ข้อกำหนดในการรับชม

อุปกรณ์ Android Watch หมายถึงการใช้งานอุปกรณ์ Android ที่มีจุดประสงค์เพื่อสวมใส่บนร่างกายหรือบนข้อมือ

การใช้งานอุปกรณ์ Android จะจัดอยู่ในประเภท Watch หากมีคุณสมบัติตรงตามเกณฑ์ต่อไปนี้ทั้งหมด:

  • มีหน้าจอที่มีความยาวเส้นทแยงมุมอยู่ในช่วง 1.1 ถึง 2.5 นิ้ว
  • มีกลไกให้สวมใส่บนร่างกาย

ข้อกำหนดเพิ่มเติมในส่วนที่เหลือของส่วนนี้มีไว้สำหรับการใช้งานอุปกรณ์ Android Watch โดยเฉพาะ

2.4.1. ฮาร์ดแวร์

ดูการใช้งานอุปกรณ์:

  • [ 7.1 .1.1/W-0-1] ต้องมีหน้าจอที่มีขนาดเส้นทแยงมุมอยู่ในช่วง 1.1 ถึง 2.5 นิ้ว

  • [ 7.2 .3/W-0-1] ต้องมีฟังก์ชัน Home สำหรับผู้ใช้ และฟังก์ชัน Back ยกเว้นเมื่ออยู่ใน UI_MODE_TYPE_WATCH

  • [ 7.2 .4/W-0-1] ต้องรองรับอินพุตหน้าจอสัมผัส

  • [ 7.3 .1/W-SR] ขอแนะนำอย่างยิ่งให้รวมมาตรความเร่งแบบ 3 แกนไว้ด้วย

  • [ 7.4 .3/W-0-1] ต้องรองรับบลูทูธ

  • [ 7.6 .1/W-0-1] ต้องมีที่เก็บข้อมูลแบบไม่ลบเลือนอย่างน้อย 1 GB สำหรับข้อมูลส่วนตัวของแอปพลิเคชัน (หรือที่เรียกว่าพาร์ติชัน "/data")

  • [ 7.6 .1/W-0-2] ต้องมีหน่วยความจำอย่างน้อย 416 MB สำหรับเคอร์เนลและพื้นที่ผู้ใช้

  • [ 7.8 .1/W-0-1] ต้องมีไมโครโฟนด้วย

  • [ 7.8 .2/W] อาจจะแต่ไม่ควรมีเอาต์พุตเสียง

2.4.2. มัลติมีเดีย

ไม่มีข้อกำหนดเพิ่มเติม

2.4.3. ซอฟต์แวร์

ดูการใช้งานอุปกรณ์:

  • [ 3 /W-0-1] ต้องประกาศคุณลักษณะ android.hardware.type.watch
  • [ 3 /W-0-2] ต้องรองรับ uiMode = UI_MODE_TYPE_WATCH

ดูการใช้งานอุปกรณ์:

ดูการใช้งานอุปกรณ์ที่ประกาศคุณสมบัติ android.hardware.audio.output :

  • [ 3.10 /W-1-1] ต้องรองรับบริการการเข้าถึงของบุคคลที่สาม
  • [ 3.10 /W-SR] ขอแนะนำอย่างยิ่งให้โหลดบริการการเข้าถึงล่วงหน้าบนอุปกรณ์ที่เทียบได้กับหรือเกินกว่าฟังก์ชันการทำงานของการเข้าถึงด้วยสวิตช์และ TalkBack (สำหรับภาษาที่รองรับโดยเครื่องมืออ่านออกเสียงข้อความที่ติดตั้งไว้ล่วงหน้า) บริการการเข้าถึงตามที่ระบุไว้ใน Talkback ที่เปิดอยู่ โครงการต้นทาง

หากการใช้งานอุปกรณ์ Watch รายงานคุณสมบัติ android.hardware.audio.output พวกเขา:

  • [ 3.11 /W-SR] ขอแนะนำอย่างยิ่งให้รวมเครื่องมือ TTS ที่รองรับภาษาที่มีอยู่ในอุปกรณ์

  • [ 3.11 /W-0-1] ต้องรองรับการติดตั้งกลไก TTS ของบุคคลที่สาม

2.4.4. ประสิทธิภาพและพลัง

หากการใช้งานอุปกรณ์ Watch มีคุณสมบัติเพื่อปรับปรุงการจัดการพลังงานของอุปกรณ์ที่รวมอยู่ใน AOSP หรือขยายคุณสมบัติที่รวมอยู่ใน AOSP พวกเขา:

  • [ 8.3 /W-SR] ได้รับการแนะนำอย่างยิ่งเพื่อให้ผู้ใช้สามารถแสดงแอปทั้งหมดที่ได้รับการยกเว้นจากโหมดสแตนด์บายแอปและโหมดประหยัดพลังงาน Doze
  • [ 8.3 /W-SR] ขอแนะนำอย่างยิ่งเพื่อให้ผู้ใช้สามารถเปิดใช้งานและปิดใช้งานคุณสมบัติประหยัดแบตเตอรี่ได้

ดูการใช้งานอุปกรณ์:

  • [ 8.4 /W-0-1] ต้องจัดเตรียมโปรไฟล์พลังงานต่อองค์ประกอบที่กำหนด ค่าการใช้ปัจจุบัน สำหรับส่วนประกอบฮาร์ดแวร์แต่ละชิ้น และการสิ้นเปลืองแบตเตอรี่โดยประมาณที่เกิดจากส่วนประกอบต่างๆ ในช่วงเวลาหนึ่งตามที่ระบุไว้ในไซต์โครงการ Android Open Source
  • [ 8.4 /W-0-2] ต้องรายงานค่าการใช้พลังงานทั้งหมดเป็นมิลลิแอมแปร์ชั่วโมง (mAh)
  • [ 8.4 /W-0-3] ต้องรายงานการใช้พลังงานของ CPU ต่อ UID ของแต่ละกระบวนการ โครงการ Android Open Source ตรงตามข้อกำหนดผ่านการใช้งานโมดูลเคอร์เนล uid_cputime
  • [ 8.4 /W-0-4] ต้องทำให้การใช้พลังงานนี้พร้อมใช้งานผ่านคำสั่งเชลล์ adb shell dumpsys batterystats ไปยังนักพัฒนาแอป
  • [ 8.4 /W] ควรนำมาประกอบกับส่วนประกอบฮาร์ดแวร์เอง หากไม่สามารถระบุการใช้พลังงานของส่วนประกอบฮาร์ดแวร์ให้กับแอปพลิเคชันได้

2.5. ข้อกำหนดด้านยานยนต์

การใช้งาน Android Automotive หมายถึงเครื่องเสียงรถยนต์ที่ใช้ Android เป็นระบบปฏิบัติการสำหรับฟังก์ชันระบบและ/หรือความบันเทิงบางส่วนหรือทั้งหมด

การใช้งานอุปกรณ์ Android จะจัดอยู่ในประเภทยานยนต์หากประกาศคุณลักษณะ android.hardware.type.automotive หรือตรงตามเกณฑ์ทั้งหมดต่อไปนี้

  • ถูกฝังไว้เป็นส่วนหนึ่งหรือเสียบเข้ากับยานยนต์ได้
  • กำลังใช้หน้าจอในแถวที่นั่งคนขับเป็นจอแสดงผลหลัก

ข้อกำหนดเพิ่มเติมในส่วนที่เหลือของส่วนนี้มีไว้สำหรับการใช้งานอุปกรณ์ Android Automotive โดยเฉพาะ

2.5.1. ฮาร์ดแวร์

การใช้งานอุปกรณ์ยานยนต์:

  • [ 7.1 .1.1/A-0-1] ต้องมีหน้าจอที่มีขนาดเส้นทแยงมุมอย่างน้อย 6 นิ้ว
  • [ 7.1 .1.1/A-0-2] ต้องมีเค้าโครงขนาดหน้าจออย่างน้อย 750 dp x 480 dp

  • [ 7.2 .3/A-0-1] ต้องมีฟังก์ชัน Home และอาจจัดให้มีฟังก์ชัน Back และ Last

  • [ 7.2 .3/A-0-2] ต้องส่งเหตุการณ์การกดทั้งแบบปกติและแบบยาวของฟังก์ชัน Back ( KEYCODE_BACK ) ไปยังแอปพลิเคชันเบื้องหน้า

  • [ 7.3 .1/A-SR] ขอแนะนำอย่างยิ่งให้รวมมาตรความเร่งแบบ 3 แกนไว้ด้วย

หากการใช้งานอุปกรณ์ยานยนต์มีมาตรความเร่งแบบ 3 แกน จะ:

หากการใช้งานอุปกรณ์ยานยนต์มีไจโรสโคปด้วย พวกเขา:

  • [ 7.3 .4/A-1-1] ต้องสามารถรายงานเหตุการณ์ได้ถึงความถี่อย่างน้อย 100 Hz

การใช้งานอุปกรณ์ยานยนต์:

  • [ 7.3 .11/A-0-1] ต้องระบุเกียร์ปัจจุบันเป็น SENSOR_TYPE_GEAR

การใช้งานอุปกรณ์ยานยนต์:

  • [ 7.3 .11.2/A-0-1] ต้องรองรับโหมดกลางวัน/กลางคืนที่กำหนดเป็น SENSOR_TYPE_NIGHT
  • [ 7.3 .11.2/A-0-2] ค่าของธง SENSOR_TYPE_NIGHT ต้องสอดคล้องกับโหมดกลางวัน/กลางคืนของแดชบอร์ด และควรอิงตามอินพุตเซ็นเซอร์วัดแสงโดยรอบ
  • เซ็นเซอร์วัดแสงโดยรอบที่อยู่ด้านล่างอาจเหมือนกับ โฟโตมิเตอร์

  • [ 7.3 .11.4/A-0-1] ต้องระบุความเร็วของยานพาหนะตามที่กำหนดโดย SENSOR_TYPE_CAR_SPEED

  • [ 7.3 .11.5/A-0-1] ต้องระบุสถานะเบรกจอดรถตามที่กำหนดโดย SENSOR_TYPE_PARKING_BRAKE

  • [ 7.4 .3/A-0-1] ต้องรองรับ Bluetooth และควรรองรับ Bluetooth LE

  • [ 7.4 .3/A-0-2] การใช้งาน Android Automotive ต้องรองรับโปรไฟล์ Bluetooth ต่อไปนี้:
    • การโทรผ่านโปรไฟล์แฮนด์ฟรี (HFP)
    • การเล่นสื่อผ่านโปรไฟล์การกระจายเสียง (A2DP)
    • การควบคุมการเล่นสื่อผ่านโปรไฟล์การควบคุมระยะไกล (AVRCP)
    • การแชร์ผู้ติดต่อโดยใช้โปรไฟล์การเข้าถึงสมุดโทรศัพท์ (PBAP)
  • [ 7.4 .3/A-SR] ขอแนะนำอย่างยิ่งเพื่อรองรับโปรไฟล์การเข้าถึงข้อความ (MAP)

  • [ 7.4 .5/A] ควรรองรับการเชื่อมต่อข้อมูลบนเครือข่ายโทรศัพท์เคลื่อนที่

  • [ 7.4 .5/A] อาจใช้ค่าคงที่ System API NetworkCapabilities#NET_CAPABILITY_OEM_PAID สำหรับเครือข่ายที่ควรพร้อมใช้งานสำหรับแอประบบ

  • [ 7.6 .1/A-0-1] ต้องมีที่เก็บข้อมูลแบบไม่ลบเลือนอย่างน้อย 4 GB สำหรับข้อมูลส่วนตัวของแอปพลิเคชัน (หรือที่เรียกว่าพาร์ติชัน "/data")

การใช้งานอุปกรณ์ยานยนต์:

  • [ 7.6 .1/A] ควรฟอร์แมตพาร์ติชันข้อมูลเพื่อให้มีประสิทธิภาพที่ดีขึ้นและอายุการใช้งานที่ยาวนานขึ้นบนพื้นที่จัดเก็บข้อมูลแบบแฟลช เช่น การใช้ระบบไฟล์ f2fs

หากการใช้งานอุปกรณ์ยานยนต์จัดให้มีการจัดเก็บข้อมูลภายนอกที่ใช้ร่วมกันผ่านส่วนหนึ่งของการจัดเก็บข้อมูลภายในที่ไม่สามารถถอดออกได้ พวกเขา:

  • [ 7.6 .1/A-SR] ได้รับการแนะนำอย่างยิ่งให้ลดค่าใช้จ่าย I/O ในการดำเนินการที่ดำเนินการบนที่จัดเก็บข้อมูลภายนอก เช่น โดยใช้ SDCardFS

หากการใช้งานอุปกรณ์ยานยนต์เป็นแบบ 32 บิต:

  • [ 7.6 .1/A-1-1] หน่วยความจำที่มีให้กับเคอร์เนลและพื้นที่ผู้ใช้ต้องมีอย่างน้อย 512MB หากใช้ความหนาแน่นต่อไปนี้:

    • 280dpi หรือต่ำกว่าบนหน้าจอขนาดเล็ก/ปกติ
    • ldpi หรือต่ำกว่าบนหน้าจอขนาดใหญ่พิเศษ
    • mdpi หรือต่ำกว่าบนหน้าจอขนาดใหญ่
  • [ 7.6 .1/A-1-2] หน่วยความจำที่มีให้กับเคอร์เนลและพื้นที่ผู้ใช้ต้องมีอย่างน้อย 608MB หากใช้ความหนาแน่นต่อไปนี้:

    • xhdpi หรือสูงกว่าบนหน้าจอขนาดเล็ก/ปกติ
    • hdpi หรือสูงกว่าบนหน้าจอขนาดใหญ่
    • mdpi หรือสูงกว่าบนหน้าจอขนาดใหญ่พิเศษ
  • [ 7.6 .1/A-1-3] หน่วยความจำที่มีให้กับเคอร์เนลและพื้นที่ผู้ใช้ต้องมีอย่างน้อย 896MB หากใช้ความหนาแน่นต่อไปนี้:

    • 400dpi หรือสูงกว่าบนหน้าจอขนาดเล็ก/ปกติ
    • xhdpi หรือสูงกว่าบนหน้าจอขนาดใหญ่
    • tvdpi หรือสูงกว่าบนหน้าจอขนาดใหญ่พิเศษ
  • [ 7.6 .1/A-1-4] หน่วยความจำที่มีให้กับเคอร์เนลและพื้นที่ผู้ใช้ต้องมีอย่างน้อย 1344MB หากใช้ความหนาแน่นต่อไปนี้:

    • 560dpi หรือสูงกว่าบนหน้าจอขนาดเล็ก/ปกติ
    • 400dpi หรือสูงกว่าบนหน้าจอขนาดใหญ่
    • xhdpi หรือสูงกว่าบนหน้าจอขนาดใหญ่พิเศษ

หากการใช้งานอุปกรณ์ยานยนต์เป็นแบบ 64 บิต:

  • [ 7.6 .1/A-2-1] หน่วยความจำสำหรับเคอร์เนลและพื้นที่ผู้ใช้ต้องมีอย่างน้อย 816MB หากใช้ความหนาแน่นต่อไปนี้:

    • 280dpi หรือต่ำกว่าบนหน้าจอขนาดเล็ก/ปกติ
    • ldpi หรือต่ำกว่าบนหน้าจอขนาดใหญ่พิเศษ
    • mdpi หรือต่ำกว่าบนหน้าจอขนาดใหญ่
  • [ 7.6 .1/A-2-2] หน่วยความจำที่มีให้กับเคอร์เนลและพื้นที่ผู้ใช้ต้องมีอย่างน้อย 944MB หากใช้ความหนาแน่นต่อไปนี้:

    • xhdpi หรือสูงกว่าบนหน้าจอขนาดเล็ก/ปกติ
    • hdpi หรือสูงกว่าบนหน้าจอขนาดใหญ่
    • mdpi หรือสูงกว่าบนหน้าจอขนาดใหญ่พิเศษ
  • [ 7.6 .1/A-2-3] หน่วยความจำที่มีให้กับเคอร์เนลและพื้นที่ผู้ใช้ต้องมีอย่างน้อย 1280MB หากใช้ความหนาแน่นต่อไปนี้:

    • 400dpi หรือสูงกว่าบนหน้าจอขนาดเล็ก/ปกติ
    • xhdpi หรือสูงกว่าบนหน้าจอขนาดใหญ่
    • tvdpi หรือสูงกว่าบนหน้าจอขนาดใหญ่พิเศษ
  • [ 7.6 .1/A-2-4] หน่วยความจำที่มีให้กับเคอร์เนลและพื้นที่ผู้ใช้ต้องมีอย่างน้อย 1824MB หากใช้ความหนาแน่นต่อไปนี้:

    • 560dpi หรือสูงกว่าบนหน้าจอขนาดเล็ก/ปกติ
    • 400dpi หรือสูงกว่าบนหน้าจอขนาดใหญ่
    • xhdpi หรือสูงกว่าบนหน้าจอขนาดใหญ่พิเศษ

โปรดทราบว่า "หน่วยความจำที่มีให้สำหรับเคอร์เนลและพื้นที่ผู้ใช้" ข้างต้นหมายถึงพื้นที่หน่วยความจำที่จัดเตรียมไว้ให้ นอกเหนือจากหน่วยความจำใดๆ ที่ทุ่มเทให้กับส่วนประกอบฮาร์ดแวร์อยู่แล้ว เช่น วิทยุ วิดีโอ และอื่นๆ ที่ไม่อยู่ภายใต้การควบคุมของเคอร์เนลในการใช้งานอุปกรณ์

การใช้งานอุปกรณ์ยานยนต์:

  • [ 7.7 .1/A] ควรมีพอร์ต USB ที่รองรับโหมดอุปกรณ์ต่อพ่วงด้วย

การใช้งานอุปกรณ์ยานยนต์:

  • [ 7.8 .1/A-0-1] ต้องมีไมโครโฟนด้วย

การใช้งานอุปกรณ์ยานยนต์:

  • [ 7.8 .2/A-0-1] ต้องมีเอาต์พุตเสียงและประกาศ android.hardware.audio.output

2.5.2. มัลติมีเดีย

การใช้งานอุปกรณ์ยานยนต์ต้องรองรับการเข้ารหัสเสียงต่อไปนี้:

  • [ 5.1 /A-0-1] โปรไฟล์ MPEG-4 AAC (AAC LC)
  • [ 5.1 /A-0-2] โปรไฟล์ MPEG-4 HE AAC (AAC+)
  • [ 5.1 /A-0-3] AAC ELD (ปรับปรุง AAC ความล่าช้าต่ำ)

การใช้งานอุปกรณ์ยานยนต์ต้องรองรับการเข้ารหัสวิดีโอต่อไปนี้:

  • [ 5.2 /A-0-1] H.264 AVC
  • [ 5.2 /A-0-2] VP8

การใช้งานอุปกรณ์ยานยนต์ต้องรองรับการถอดรหัสวิดีโอต่อไปนี้:

  • [ 5.3 /A-0-1] H.264 AVC
  • [ 5.3 /A-0-2] MPEG-4 SP
  • [ 5.3 /A-0-3] VP8
  • [ 5.3 /A-0-4] VP9

การใช้งานอุปกรณ์ยานยนต์ได้รับการแนะนำอย่างยิ่งเพื่อรองรับการถอดรหัสวิดีโอต่อไปนี้:

  • [ 5.3 /A-SR] H.265 HEVC

2.5.3. ซอฟต์แวร์

การใช้งานอุปกรณ์ยานยนต์:

  • [ 3 /A-0-1] ต้องประกาศคุณลักษณะ android.hardware.type.automotive

  • [ 3 /A-0-2] ต้องรองรับ uiMode = UI_MODE_TYPE_CAR

  • [ 3 /A-0-3] ต้องรองรับ API สาธารณะทั้งหมดในเนมสเปซ android.car.*

  • [ 3.4 .1/A-0-1] ต้องมีการใช้งาน android.webkit.Webview API โดยสมบูรณ์

  • [ 3.8 .3/A-0-1] ต้องแสดงการแจ้งเตือนที่ใช้ API Notification.CarExtender เมื่อมีการร้องขอจากแอปพลิเคชันบุคคลที่สาม

  • [ 3.8 .4/A-SR] ขอแนะนำเป็นอย่างยิ่งให้ใช้ตัวช่วยบนอุปกรณ์เพื่อจัดการกับ การดำเนินการ Assist

  • [ 3.13 /A-SR] ขอแนะนำอย่างยิ่งให้รวมองค์ประกอบ UI การตั้งค่าด่วนไว้ด้วย

หากการใช้งานอุปกรณ์ยานยนต์มีปุ่มกดเพื่อพูด ระบบจะ:

  • [ 3.8 .4/A-1-1] ต้องใช้การกดปุ่มกดเพื่อพูดสั้นๆ เป็นการโต้ตอบที่กำหนดเพื่อเปิดแอปช่วยเหลือที่ผู้ใช้เลือก กล่าวคือแอปที่ใช้ VoiceInteractionService

การใช้งานอุปกรณ์ยานยนต์:

  • [ 3.14 /A-0-1] ต้องมีเฟรมเวิร์ก UI เพื่อรองรับแอปของบุคคลที่สามโดยใช้ API สื่อตามที่อธิบายไว้ในส่วน 3.14

2.5.4. ประสิทธิภาพและพลัง

หากการใช้งานอุปกรณ์ยานยนต์มีคุณสมบัติเพื่อปรับปรุงการจัดการพลังงานของอุปกรณ์ที่รวมอยู่ใน AOSP หรือขยายคุณสมบัติที่รวมอยู่ใน AOSP พวกเขา:

  • [ 8.3 /A-1-1] ต้องให้เงินแก่ผู้ใช้ในการเปิดใช้งานและปิดใช้งานคุณสมบัติประหยัดแบตเตอรี่
  • [ 8.3 /A-1-2] จะต้องให้ผู้ใช้จ่ายเพื่อแสดงแอพทั้งหมดที่ได้รับการยกเว้นจากโหมดสแตนด์บายแอพและโหมดประหยัดพลังงาน

การใช้งานอุปกรณ์ยานยนต์:

  • [ 8.2 /A-0-1] ต้องรายงานจำนวนไบต์ที่อ่านและเขียนไปยังที่เก็บข้อมูลที่ไม่ระเหยต่อ UID ของแต่ละกระบวนการดังนั้นสถิติจึงพร้อมใช้งานสำหรับนักพัฒนาผ่านระบบ API android.car.storagemonitoring.CarStorageMonitoringManager โครงการโอเพนซอร์ส Android ตรงตามข้อกำหนดผ่านโมดูลเคอร์เนล uid_sys_stats
  • [ 8.4 /A-0-1] จะต้องจัดทำโปรไฟล์พลังงานต่อองค์ประกอบที่กำหนด ค่าการบริโภคปัจจุบัน สำหรับแต่ละองค์ประกอบฮาร์ดแวร์และการระบายแบตเตอรี่โดยประมาณที่เกิดจากส่วนประกอบเมื่อเวลาผ่านไปตามที่บันทึกไว้ในเว็บไซต์โครงการ Android Open Source
  • [ 8.4 /A-0-2] จะต้องรายงานค่าการใช้พลังงานทั้งหมดในชั่วโมง Milliampere (MAH)
  • [ 8.4 /A-0-3] ต้องรายงานการใช้พลังงาน CPU ต่อ UID ของแต่ละกระบวนการ โครงการโอเพนซอร์ส Android ตรงตามข้อกำหนดผ่านการใช้งานโมดูลเคอร์เนล uid_cputime
  • [ 8.4 /a] ควรนำมาประกอบกับส่วนประกอบฮาร์ดแวร์เองหากไม่สามารถใช้แอตทริบิวต์การใช้พลังงานส่วนประกอบฮาร์ดแวร์ไปยังแอปพลิเคชัน
  • [ 8.4 /A-0-4] ต้องทำให้การใช้พลังงานนี้พร้อมใช้งานผ่านคำสั่งเชลล์ adb shell dumpsys batterystats ไปยังผู้พัฒนาแอป

2.5.5. รูปแบบการรักษาความปลอดภัย

หากการใช้งานอุปกรณ์ยานยนต์รองรับผู้ใช้หลายคนพวกเขา:

  • [ 9.5 /A-1-1] ต้องมีบัญชีแขกที่อนุญาตให้ใช้ฟังก์ชั่นทั้งหมดที่ได้รับจากระบบยานพาหนะโดยไม่ต้องให้ผู้ใช้เข้าสู่ระบบ

หากการใช้งานอุปกรณ์ยานยนต์รองรับหน้าจอล็อคที่ปลอดภัยพวกเขา:

  • [ 9.9 .2/A-1-1] ต้องรองรับการเข้ารหัสต่อคีย์การรับรองความถูกต้องเฉพาะของผู้ใช้ การเข้ารหัสตามไฟล์ (FBE) เป็นวิธีหนึ่งในการทำ

การใช้งานอุปกรณ์ยานยนต์:

  • [ 9.14 /A-0-1] ต้องใช้ข้อความ Gatekeep จากระบบย่อยยานพาหนะ Android Framework เช่นประเภทข้อความที่อนุญาตและแหล่งข้อความที่อนุญาต
  • [ 9.14 /A-0-2] ต้องเฝ้าระวังการปฏิเสธการโจมตีจากเฟรมเวิร์ก Android หรือแอพของบุคคลที่สาม ผู้พิทักษ์ซอฟต์แวร์ที่เป็นอันตรายนี้ทำให้เครือข่ายยานพาหนะมีการจราจรซึ่งอาจนำไปสู่ระบบย่อยยานพาหนะที่ทำงานผิดปกติ

2.6. ข้อกำหนดของแท็บเล็ต

อุปกรณ์แท็บเล็ต Android หมายถึงการใช้งานอุปกรณ์ Android ที่ตรงตามเกณฑ์ทั้งหมดต่อไปนี้:

  • โดยทั่วไปจะใช้โดยจับมือทั้งสอง
  • ไม่มีการกำหนดค่าแบบฝาพับหรือแบบเปิดประทุนได้
  • การใช้แป้นพิมพ์ทางกายภาพใด ๆ ที่ใช้กับอุปกรณ์จะต้องเชื่อมต่อโดยใช้การเชื่อมต่อมาตรฐาน
  • มีแหล่งพลังงานที่ให้ความคล่องตัวเช่นแบตเตอรี่
  • มีขนาดหน้าจอแนวทแยงทางกายภาพในช่วง 7 ถึง 18 นิ้ว

การใช้งานอุปกรณ์แท็บเล็ตมีข้อกำหนดคล้ายกับการใช้งานอุปกรณ์มือถือ ข้อยกเว้นถูกระบุโดยและ * ในส่วนนั้นและระบุไว้สำหรับการอ้างอิงในส่วนนี้

2.4.1. ฮาร์ดแวร์

ขนาดหน้าจอ

  • [ 7.1 .1.1/TAB-0-1] ต้องมีหน้าจอในช่วง 7 ถึง 18 นิ้ว

หน่วยความจำและการจัดเก็บขั้นต่ำ (ส่วนที่ 7.6.1)

ความหนาแน่นของหน้าจอที่ระบุไว้สำหรับหน้าจอขนาดเล็ก/ปกติในข้อกำหนดมือถือไม่สามารถใช้ได้กับแท็บเล็ต

โหมดอุปกรณ์ต่อพ่วง USB (ส่วน 7.7.1)

หากการใช้งานอุปกรณ์แท็บเล็ตมีพอร์ต USB ที่รองรับโหมดอุปกรณ์ต่อพ่วงพวกเขา:

  • [ 7.7.1 /Tab] อาจใช้งาน Android Open Accessory (AOA) API

โหมดความเป็นจริงเสมือน (ส่วนที่ 7.9.1)

ประสิทธิภาพสูงเสมือนจริง (ส่วนที่ 7.9.2)

ข้อกำหนดด้านความเป็นจริงเสมือนไม่สามารถใช้ได้กับแท็บเล็ต

3. ซอฟต์แวร์

3.1. ความเข้ากันได้ของ API ที่มีการจัดการ

สภาพแวดล้อมการดำเนินการโค้ดไบต์ Dalvik ที่มีการจัดการเป็นเครื่องมือหลักสำหรับแอปพลิเคชัน Android Android Application Programming Interface (API) คือชุดของอินเทอร์เฟซแพลตฟอร์ม Android ที่เปิดเผยต่อแอปพลิเคชันที่ทำงานในสภาพแวดล้อมรันไทม์ที่มีการจัดการ

การใช้งานอุปกรณ์:

  • [C-0-1] จะต้องจัดเตรียมการใช้งานที่สมบูรณ์รวมถึงพฤติกรรมที่บันทึกไว้ทั้งหมดของ API ที่บันทึกไว้ใด ๆ ที่เปิดเผยโดย Android SDK หรือ API ใด ๆ ที่ตกแต่งด้วยเครื่องหมาย“ @systemapi” ในซอร์สโค้ด Android ต้นน้ำ

  • [C-0-2] ต้องสนับสนุน/รักษาคลาสวิธีการและองค์ประกอบที่เกี่ยวข้องทั้งหมดที่ทำเครื่องหมายโดยคำอธิบายประกอบ Testapi (@testapi)

  • [C-0-3] จะต้องไม่ละเว้น API ใด ๆ ที่ได้รับการจัดการเปลี่ยนอินเทอร์เฟซ API หรือลายเซ็นเบี่ยงเบนจากพฤติกรรมที่บันทึกไว้หรือรวมถึง No-Ops ยกเว้นที่ได้รับอนุญาตโดยเฉพาะจากคำจำกัดความความเข้ากันได้นี้

  • [C-0-4] จะต้องรักษา APIs ให้อยู่และประพฤติตนอย่างสมเหตุสมผลแม้ว่าคุณสมบัติฮาร์ดแวร์บางอย่างที่ Android รวมถึง APIs ดู ส่วนที่ 7 สำหรับข้อกำหนดเฉพาะสำหรับสถานการณ์นี้

  • [C-0-5] ต้อง จำกัด การใช้แอพที่ 3 ของบุคคลที่ใช้งานของ APIs ที่ซ่อนอยู่ซึ่งกำหนดเป็น APIs ในเนมสเปซ Android ที่ตกแต่งด้วยคำอธิบายประกอบ @hidden แต่ไม่ได้อยู่กับ @SystemAPI หรือ @TestApi ตามที่อธิบายไว้ใน เอกสาร SDK และจัดส่งด้วย API ที่ซ่อนอยู่แต่ละรายการในรายการที่ จำกัด เดียวกันตามที่ระบุผ่านรายการชั่วคราวและไฟล์ denylist ใน prebuilts/runtime/appcompat/ path สำหรับสาขาระดับ API ที่เหมาะสมใน AOSP อย่างไรก็ตามพวกเขา:

    • อาจหาก API ที่ซ่อนอยู่หายไปหรือนำไปใช้แตกต่างกันในการใช้งานอุปกรณ์ให้ย้าย API ที่ซ่อนอยู่ไปยัง Denylist หรือละเว้นจากรายการที่ จำกัด ทั้งหมด
    • อาจหาก API ที่ซ่อนอยู่ไม่มีอยู่ใน AOSP ให้เพิ่ม API ที่ซ่อนอยู่ในรายการใด ๆ ที่ จำกัด
    • อาจใช้กลไกการอัปเดตแบบไดนามิกที่ย้าย API ที่ซ่อนอยู่จากรายการที่ จำกัด ไปยังรายการที่ จำกัด น้อยกว่ายกเว้น AllowList

3.1.1. ส่วนขยายของ Android

Android มีการรองรับการขยาย API ที่มีการจัดการโดยยังคงรักษาเวอร์ชัน API ไว้เหมือนเดิม

  • [C-0-1] การใช้งานอุปกรณ์ Android จะต้องโหลดการใช้งาน AOSP ของทั้ง ExtShared และบริการ ExtServices ใช้ร่วมกันทั้งในห้องสมุดที่มีรุ่นที่สูงกว่าหรือเท่ากับรุ่นต่ำสุดที่อนุญาตต่อแต่ละระดับ API ตัวอย่างเช่น การใช้งานอุปกรณ์ Android 7.0 ที่ใช้ API ระดับ 24 ต้องมีเวอร์ชัน 1 เป็นอย่างน้อย

3.1.2. ห้องสมุด Android

เนื่องจาก การหักล้างไคลเอ็นต์ Apache HTTP การใช้งานอุปกรณ์:

  • [C-0-1] ต้องไม่วาง org.apache.http.legacy library ใน bootclasspath
  • [C-0-2] ต้องเพิ่ม org.apache.http.legacy ไลบรารีไปยังแอปพลิเคชัน classpath เฉพาะเมื่อแอปตอบสนองหนึ่งในเงื่อนไขต่อไปนี้:
    • เป้าหมาย API ระดับ 28 หรือต่ำกว่า
    • ประกาศในรายการว่ามันต้องการไลบรารีโดยการตั้งค่าแอตทริบิวต์ android:name ของ <uses-library> เป็น org.apache.http.legacy

การใช้งาน AOSP เป็นไปตามข้อกำหนดเหล่านี้

3.2. ความเข้ากันได้ของ Soft API

นอกเหนือจาก API ที่มีการจัดการจาก ส่วนที่ 3.1 แล้ว Android ยังมี API แบบ “soft” แบบรันไทม์เท่านั้นที่สำคัญ ในรูปแบบของสิ่งต่างๆ เช่น Intent สิทธิ์ และลักษณะที่คล้ายกันของแอปพลิเคชัน Android ที่ไม่สามารถบังคับใช้ได้ในเวลารวบรวมแอปพลิเคชัน

3.2.1. สิทธิ์

  • [C-0-1] ผู้ใช้อุปกรณ์จะต้องสนับสนุนและบังคับใช้ค่าคงที่การอนุญาตทั้งหมดตามที่บันทึกไว้โดย หน้าอ้างอิงการอนุญาต โปรดทราบว่า ส่วนที่ 9 แสดงรายการข้อกำหนดเพิ่มเติมที่เกี่ยวข้องกับโมเดลความปลอดภัยของ Android

3.2.2. สร้างพารามิเตอร์

Android API มีค่าคงที่จำนวนหนึ่งใน คลาส android.os.Build ที่มีวัตถุประสงค์เพื่ออธิบายอุปกรณ์ปัจจุบัน

  • [C-0-1] เพื่อให้ค่าที่สอดคล้องกันและมีความหมายในการใช้งานอุปกรณ์ตารางด้านล่างนี้มีข้อ จำกัด เพิ่มเติมเกี่ยวกับรูปแบบของค่าเหล่านี้ซึ่งการใช้งานอุปกรณ์จะต้องปฏิบัติตาม
พารามิเตอร์ รายละเอียด
เวอร์ชัน. ปล่อย เวอร์ชันของระบบ Android ที่ใช้งานอยู่ในปัจจุบัน ในรูปแบบที่มนุษย์สามารถอ่านได้ ฟิลด์นี้ต้องมีหนึ่งในค่าสตริงที่กำหนดไว้ใน 9
เวอร์ชัน.SDK เวอร์ชันของระบบ Android ที่ใช้งานอยู่ในปัจจุบัน ในรูปแบบที่เข้าถึงได้โดยรหัสแอปพลิเคชันบุคคลที่สาม สำหรับ Android 9 ฟิลด์นี้จะต้องมีค่าจำนวนเต็ม 9_int
เวอร์ชัน.SDK_INT เวอร์ชันของระบบ Android ที่ใช้งานอยู่ในปัจจุบัน ในรูปแบบที่เข้าถึงได้โดยรหัสแอปพลิเคชันบุคคลที่สาม สำหรับ Android 9 ฟิลด์นี้จะต้องมีค่าจำนวนเต็ม 9_int
รุ่นที่เพิ่มขึ้น ค่าที่เลือกโดยผู้ใช้อุปกรณ์ซึ่งกำหนดโครงสร้างเฉพาะของระบบ Android ที่กำลังดำเนินการอยู่ ในรูปแบบที่มนุษย์สามารถอ่านได้ จะต้องไม่นำค่านี้ไปใช้ซ้ำสำหรับบิลด์อื่นที่ผู้ใช้ปลายทางสามารถใช้ได้ การใช้งานทั่วไปของฟิลด์นี้คือเพื่อระบุว่าหมายเลขบิลด์หรือตัวระบุการเปลี่ยนแปลงการควบคุมแหล่งที่มาใดที่ใช้ในการสร้างบิลด์ ไม่มีข้อกำหนดในรูปแบบเฉพาะของฟิลด์นี้ ยกเว้นว่าจะต้องไม่เป็นค่าว่างหรือสตริงว่าง ("")
กระดาน ค่าที่เลือกโดยผู้ใช้อุปกรณ์ซึ่งระบุฮาร์ดแวร์ภายในเฉพาะที่อุปกรณ์ใช้ ในรูปแบบที่มนุษย์สามารถอ่านได้ การใช้ฟิลด์นี้ที่เป็นไปได้คือเพื่อระบุการแก้ไขเฉพาะของบอร์ดที่จ่ายไฟให้กับอุปกรณ์ ค่าของฟิลด์นี้ต้องเข้ารหัสได้เป็น ASCII 7 บิต และตรงกับนิพจน์ทั่วไป “^[a-zA-Z0-9_-]+$”
ยี่ห้อ ค่าที่สะท้อนถึงชื่อแบรนด์ที่เกี่ยวข้องกับอุปกรณ์ที่ผู้ใช้ปลายทางรู้จัก ต้องอยู่ในรูปแบบที่มนุษย์สามารถอ่านได้ และควรเป็นตัวแทนของผู้ผลิตอุปกรณ์หรือแบรนด์บริษัทที่จำหน่ายอุปกรณ์นั้น ค่าของฟิลด์นี้ต้องเข้ารหัสได้เป็น ASCII 7 บิต และตรงกับนิพจน์ทั่วไป “^[a-zA-Z0-9_-]+$”
SUPPORTED_ABIS ชื่อของชุดคำสั่ง (ประเภท CPU + แบบแผน ABI) ของโค้ดเนทีฟ ดู หัวข้อ 3.3 ความเข้ากันได้ของ Native API
SUPPORTED_32_BIT_ABIS ชื่อของชุดคำสั่ง (ประเภท CPU + แบบแผน ABI) ของโค้ดเนทีฟ ดู หัวข้อ 3.3 ความเข้ากันได้ของ Native API
SUPPORTED_64_BIT_ABIS ชื่อของชุดคำสั่งที่สอง (ประเภท CPU + แบบแผน ABI) ของโค้ดเนทีฟ ดู หัวข้อ 3.3 ความเข้ากันได้ของ Native API
CPU_ABI ชื่อของชุดคำสั่ง (ประเภท CPU + แบบแผน ABI) ของโค้ดเนทีฟ ดู หัวข้อ 3.3 ความเข้ากันได้ของ Native API
CPU_ABI2 ชื่อของชุดคำสั่งที่สอง (ประเภท CPU + แบบแผน ABI) ของโค้ดเนทีฟ ดู หัวข้อ 3.3 ความเข้ากันได้ของ Native API
อุปกรณ์ ค่าที่เลือกโดยผู้ใช้อุปกรณ์ซึ่งมีชื่อการพัฒนาหรือชื่อรหัสที่ระบุการกำหนดค่าคุณสมบัติฮาร์ดแวร์และการออกแบบทางอุตสาหกรรมของอุปกรณ์ ค่าของฟิลด์นี้ต้องเข้ารหัสได้เป็น ASCII 7 บิต และตรงกับนิพจน์ทั่วไป “^[a-zA-Z0-9_-]+$” ชื่ออุปกรณ์นี้จะต้องไม่เปลี่ยนแปลงตลอดอายุการใช้งานของผลิตภัณฑ์
ลายนิ้วมือ สตริงที่ระบุโครงสร้างนี้โดยไม่ซ้ำกัน มันควรจะสามารถอ่านได้โดยมนุษย์พอสมควร ต้องเป็นไปตามเทมเพลตนี้:

$(แบรนด์)/$(ผลิตภัณฑ์)/
$(อุปกรณ์):$(VERSION.RELEASE)/$(ID)/$(VERSION.INCREMENTAL):$(TYPE)/$(TAGS)

ตัวอย่างเช่น:

จุดสุดยอด/myproduct/
MyDevice: 9/lmyxx/3359: userdebug/test-keys

ลายนิ้วมือต้องไม่มีอักขระช่องว่าง หากฟิลด์อื่นที่รวมอยู่ในเทมเพลตด้านบนมีอักขระช่องว่าง จะต้องแทนที่ฟิลด์เหล่านั้นในลายนิ้วมือของบิลด์ด้วยอักขระอื่น เช่น อักขระขีดล่าง ("_") ค่าของฟิลด์นี้จะต้องเข้ารหัสเป็น ASCII 7 บิต

ฮาร์ดแวร์ ชื่อของฮาร์ดแวร์ (จากบรรทัดคำสั่งเคอร์เนลหรือ /proc) มันควรจะสามารถอ่านได้โดยมนุษย์พอสมควร ค่าของฟิลด์นี้ต้องเข้ารหัสได้เป็น ASCII 7 บิต และตรงกับนิพจน์ทั่วไป “^[a-zA-Z0-9_-]+$”
เจ้าภาพ สตริงที่ระบุโฮสต์ที่ไม่ซ้ำซึ่งบิลด์ถูกสร้างขึ้น ในรูปแบบที่มนุษย์สามารถอ่านได้ ไม่มีข้อกำหนดในรูปแบบเฉพาะของฟิลด์นี้ ยกเว้นว่าจะต้องไม่เป็นค่าว่างหรือสตริงว่าง ("")
บัตรประจำตัวประชาชน ตัวระบุที่ผู้ใช้อุปกรณ์เลือกเพื่ออ้างอิงถึงรุ่นเฉพาะ ในรูปแบบที่มนุษย์สามารถอ่านได้ ช่องนี้สามารถเหมือนกับ android.os.Build.VERSION.INCREMENTAL ได้ แต่ควรเป็นค่าที่มีความหมายเพียงพอสำหรับผู้ใช้ปลายทางในการแยกแยะระหว่างรุ่นซอฟต์แวร์ ค่าของฟิลด์นี้ต้องเข้ารหัสได้เป็น ASCII 7 บิต และตรงกับนิพจน์ทั่วไป “^[a-zA-Z0-9._-]+$”
ผู้ผลิต ชื่อทางการค้าของผู้ผลิตอุปกรณ์ดั้งเดิม (OEM) ของผลิตภัณฑ์ ไม่มีข้อกำหนดในรูปแบบเฉพาะของฟิลด์นี้ ยกเว้นว่าจะต้องไม่เป็นค่าว่างหรือสตริงว่าง ("") ฟิลด์นี้จะต้องไม่เปลี่ยนแปลงในช่วงอายุการใช้งานของผลิตภัณฑ์
แบบอย่าง ค่าที่เลือกโดยผู้ใช้อุปกรณ์ซึ่งมีชื่ออุปกรณ์ที่ผู้ใช้ปลายทางรู้จัก นี่ควรเป็นชื่อเดียวกับที่ใช้วางตลาดและจำหน่ายอุปกรณ์ให้กับผู้ใช้ปลายทาง ไม่มีข้อกำหนดในรูปแบบเฉพาะของฟิลด์นี้ ยกเว้นว่าจะต้องไม่เป็นค่าว่างหรือสตริงว่าง ("") ฟิลด์นี้จะต้องไม่เปลี่ยนแปลงในช่วงอายุการใช้งานของผลิตภัณฑ์
ผลิตภัณฑ์ ค่าที่เลือกโดยผู้ใช้อุปกรณ์ซึ่งมีชื่อการพัฒนาหรือชื่อรหัสของผลิตภัณฑ์เฉพาะ (SKU) ซึ่งจะต้องไม่ซ้ำกันภายในแบรนด์เดียวกัน ต้องให้มนุษย์สามารถอ่านได้ แต่ไม่จำเป็นว่าจะต้องมีจุดประสงค์ให้ผู้ใช้ปลายทางดู ค่าของฟิลด์นี้ต้องเข้ารหัสได้เป็น ASCII 7 บิต และตรงกับนิพจน์ทั่วไป “^[a-zA-Z0-9_-]+$” ชื่อผลิตภัณฑ์นี้จะต้องไม่เปลี่ยนแปลงตลอดอายุการใช้งานของผลิตภัณฑ์
อนุกรม ต้องกลับ "ไม่ทราบ"
แท็ก รายการแท็กที่คั่นด้วยเครื่องหมายจุลภาคซึ่งเลือกโดยผู้ใช้อุปกรณ์ ซึ่งจะทำให้โครงสร้างแตกต่างออกไปอีก ช่องนี้ต้องมีค่าใดค่าหนึ่งที่สอดคล้องกับการกำหนดค่าการเซ็นชื่อแพลตฟอร์ม Android ทั่วไป 3 แบบ ได้แก่ คีย์การเผยแพร่ คีย์การพัฒนา และคีย์การทดสอบ
เวลา ค่าที่แสดงถึงการประทับเวลาเมื่อมีการสร้างเกิดขึ้น
พิมพ์ ค่าที่เลือกโดยผู้ใช้อุปกรณ์ซึ่งระบุการกำหนดค่ารันไทม์ของบิลด์ ฟิลด์นี้ต้องมีค่าใดค่าหนึ่งที่สอดคล้องกับการกำหนดค่ารันไทม์ทั่วไปของ Android สามค่า: ผู้ใช้, userdebug หรือภาษาอังกฤษ
ผู้ใช้ ชื่อหรือ ID ผู้ใช้ของผู้ใช้ (หรือผู้ใช้อัตโนมัติ) ที่สร้างบิลด์ ไม่มีข้อกำหนดในรูปแบบเฉพาะของฟิลด์นี้ ยกเว้นว่าจะต้องไม่เป็นค่าว่างหรือสตริงว่าง ("")
ความปลอดภัย_แพตช์ ค่าที่ระบุระดับแพตช์ความปลอดภัยของบิลด์ ต้องบ่งบอกว่าโครงสร้างไม่เสี่ยงต่อปัญหาใดๆ ที่อธิบายไว้ใน Android Public Security Bulletin ที่กำหนด ต้องอยู่ในรูปแบบ [YYYY-MM-DD] ซึ่งตรงกับสตริงที่กำหนดไว้ซึ่งบันทึกไว้ใน Android Public Security Bulletin หรือใน Android Security Advisory เช่น "2015-11-01"
BASE_OS ค่าที่แสดงพารามิเตอร์ FINGERPRINT ของบิลด์ที่เหมือนกันกับบิลด์นี้ ยกเว้นแพตช์ที่ให้ไว้ใน Android Public Security Bulletin ต้องรายงานค่าที่ถูกต้อง และหากไม่มีบิลด์ดังกล่าว ให้รายงานสตริงว่าง ("")
บูตโหลดเดอร์ ค่าที่เลือกโดยอุปกรณ์ใช้งานอุปกรณ์ระบุรุ่น bootloader ภายในเฉพาะที่ใช้ในอุปกรณ์ในรูปแบบที่มนุษย์อ่านได้ ค่าของฟิลด์นี้ต้องเข้ารหัสได้เป็น ASCII 7 บิต และตรงกับนิพจน์ทั่วไป “^[a-zA-Z0-9._-]+$”
getRadioversion () ต้อง (เป็นหรือส่งคืน) ค่าที่เลือกโดยผู้ใช้อุปกรณ์ระบุรุ่นวิทยุ/โมเด็มภายในเฉพาะที่ใช้ในอุปกรณ์ในรูปแบบที่มนุษย์อ่านได้ หากอุปกรณ์ไม่มีวิทยุ/โมเด็มภายในใด ๆ จะต้องส่งคืนค่า NULL ค่าของฟิลด์นี้จะต้องเข้ารหัสเป็น ASCII 7 บิตและจับคู่นิพจน์ทั่วไป“^[A-za-Z0-9 ._-,]+$”
getSerial () ต้อง (เป็นหรือส่งคืน) หมายเลขซีเรียลของฮาร์ดแวร์ ซึ่งจะต้องพร้อมใช้งานและไม่ซ้ำกันในอุปกรณ์ที่มี MODEL และ MANUFACTURER เดียวกัน ค่าของฟิลด์นี้จะต้องเข้ารหัสเป็น ASCII 7 บิตและจับคู่นิพจน์ทั่วไป“^[A-za-Z0-9 ._-,]+$”

3.2.3. ความเข้ากันได้ของเจตนา

3.2.3.1. จุดประสงค์หลักของแอปพลิเคชัน

เจตนาของ Android อนุญาตให้ส่วนประกอบของแอปพลิเคชันขอฟังก์ชันการทำงานจากส่วนประกอบ Android อื่น ๆ โครงการอัปสตรีม Android ประกอบด้วยรายการแอปพลิเคชันที่ถือว่าเป็นแอปพลิเคชันหลักของ Android ซึ่งใช้รูปแบบความตั้งใจหลายประการเพื่อดำเนินการทั่วไป

  • [C-0-1] การใช้งานอุปกรณ์จะต้องโหลดแอปพลิเคชั่นหรือส่วนประกอบของบริการอย่างน้อยหนึ่งรายการด้วยตัวจัดการเจตนาสำหรับรูปแบบตัวกรองความตั้งใจสาธารณะทั้งหมดที่กำหนดโดยแอปพลิเคชัน Android หลักต่อไปนี้ใน AOSP:

    • นาฬิกาตั้งโต๊ะ
    • เบราว์เซอร์
    • ปฏิทิน
    • รายชื่อผู้ติดต่อ
    • แกลเลอรี่
    • ค้นหาทั่วโลก
    • ตัวเปิด
    • ดนตรี
    • การตั้งค่า
3.2.3.2. ความละเอียดความตั้งใจ
  • [C-0-1] ในฐานะ Android เป็นแพลตฟอร์มที่ขยายได้การใช้งานอุปกรณ์จะต้องอนุญาตให้แต่ละรูปแบบความตั้งใจที่อ้างอิงใน ส่วน 3.2.3.1 ยกเว้นการตั้งค่าจะถูกแทนที่ด้วยแอปพลิเคชันของบุคคลที่สาม การใช้งานโอเพนซอร์ส Android ต้นน้ำอนุญาตให้ทำสิ่งนี้โดยค่าเริ่มต้น

  • [C-0-2] ผู้ดำเนินการ DVICE จะต้องไม่แนบสิทธิพิเศษพิเศษกับการใช้รูปแบบความตั้งใจเหล่านี้หรือป้องกันแอปพลิเคชันของบุคคลที่สามจากการเชื่อมโยงและสมมติว่าการควบคุมรูปแบบเหล่านี้ ข้อห้ามนี้รวมถึงแต่ไม่จำกัดเฉพาะการปิดใช้งานอินเทอร์เฟซผู้ใช้ "ตัวเลือก" ที่อนุญาตให้ผู้ใช้เลือกระหว่างแอปพลิเคชันหลายตัวที่จัดการรูปแบบความตั้งใจเดียวกันทั้งหมด

  • [C-0-3] การใช้งานอุปกรณ์จะต้องจัดให้มีส่วนต่อประสานผู้ใช้สำหรับผู้ใช้เพื่อแก้ไขกิจกรรมเริ่มต้นสำหรับเจตนา

  • อย่างไรก็ตาม การใช้งานอุปกรณ์อาจมีกิจกรรมเริ่มต้นสำหรับรูปแบบ URI ที่เฉพาะเจาะจง (เช่น http://play.google.com) เมื่อกิจกรรมเริ่มต้นให้แอตทริบิวต์ที่เฉพาะเจาะจงมากขึ้นสำหรับ URI ข้อมูล ตัวอย่างเช่น รูปแบบตัวกรอง Intent ที่ระบุ URI ข้อมูล “http://www.android.com” มีความเฉพาะเจาะจงมากกว่ารูปแบบ Intent หลักของเบราว์เซอร์สำหรับ “http://”

Android ยังมีกลไกสำหรับแอปของบุคคลที่สามในการประกาศ พฤติกรรมการเชื่อมโยงแอป เริ่มต้นที่เชื่อถือได้สำหรับ Intent ของเว็บ URI บางประเภท เมื่อมีการกำหนดการประกาศที่เชื่อถือได้ในรูปแบบตัวกรอง Intent ของแอป การใช้งานอุปกรณ์:

  • [C-0-4] จะต้องพยายามตรวจสอบตัวกรองเจตนาใด ๆ โดยทำตามขั้นตอนการตรวจสอบความถูกต้องที่กำหนดไว้ใน ข้อกำหนดการเชื่อมโยงสินทรัพย์ดิจิตอล ตามที่ดำเนินการโดยผู้จัดการแพ็คเกจในโครงการโอเพ่นซอร์ส Android ต้นน้ำ
  • [C-0-5] ต้องพยายามตรวจสอบความถูกต้องของตัวกรองเจตนาในระหว่างการติดตั้งแอปพลิเคชันและตั้งค่าตัวกรอง URI Intent ที่ผ่านการตรวจสอบความสำเร็จทั้งหมดเป็นตัวจัดการแอพเริ่มต้นสำหรับ URIs ของพวกเขา
  • อาจตั้งค่าตัวกรอง Intent ของ URI ที่เฉพาะเจาะจงเป็นตัวจัดการแอปเริ่มต้นสำหรับ URI ของตน หากได้รับการยืนยันสำเร็จแล้ว แต่ตัวกรอง URI อื่นๆ ที่ไม่ผ่านการตรวจสอบ หากการใช้งานอุปกรณ์ทำเช่นนี้ จะต้องจัดเตรียมรูปแบบต่อ URI ที่เหมาะสมให้กับผู้ใช้ในเมนูการตั้งค่า
  • ต้องให้การควบคุมลิงก์แอปต่อแอปแก่ผู้ใช้ในการตั้งค่าดังนี้:
    • [C-0-6] ผู้ใช้จะต้องสามารถแทนที่พฤติกรรมลิงก์แอพเริ่มต้นแบบองค์รวมของแอพสำหรับแอพที่จะเปิดเสมอถามเสมอหรือไม่เปิดซึ่งจะต้องใช้กับตัวกรอง Intent URI ของผู้สมัครทุกคนอย่างเท่าเทียมกัน
    • [C-0-7] ผู้ใช้จะต้องสามารถดูรายการตัวกรองเจตนา URI ของผู้สมัครได้
    • การใช้งานอุปกรณ์อาจช่วยให้ผู้ใช้สามารถแทนที่ตัวกรอง Intent ของ URI ของผู้สมัครเฉพาะที่ได้รับการตรวจสอบเรียบร้อยแล้ว โดยอิงตามตัวกรองต่อ Intent
    • [C-0-8] การใช้งานอุปกรณ์จะต้องให้ความสามารถในการดูและแทนที่ตัวกรอง URI ของผู้สมัครเฉพาะผู้ใช้หากการใช้งานอุปกรณ์ช่วยให้ตัวกรอง URI Intent ผู้สมัครบางคนประสบความสำเร็จในการตรวจสอบในขณะที่บางคนอาจล้มเหลว
3.2.3.3. เนมสเปซเจตนา
  • [C-0-1] การใช้งานอุปกรณ์จะต้องไม่รวมองค์ประกอบ Android ใด ๆ ที่ให้เกียรติรูปแบบความตั้งใจหรือการออกอากาศใหม่ใด ๆ โดยใช้การกระทำหมวดหมู่หรือสตริงคีย์อื่น ๆ ใน Android หรือ com.android เนมสเปซ
  • [C-0-2] ผู้ใช้อุปกรณ์จะต้องไม่รวมส่วนประกอบ Android ใด ๆ ที่ให้เกียรติรูปแบบความตั้งใจหรือการออกอากาศใหม่ใด ๆ โดยใช้การกระทำหมวดหมู่หรือสตริงคีย์อื่น ๆ ในพื้นที่แพ็คเกจที่เป็นขององค์กรอื่น
  • [C-0-3] ผู้ใช้อุปกรณ์จะต้องไม่เปลี่ยนแปลงหรือขยายรูปแบบความตั้งใจใด ๆ ที่ใช้โดยแอพหลักที่ระบุไว้ใน ส่วน 3.2.3.1
  • การใช้งานอุปกรณ์อาจรวมถึงรูปแบบเจตนาโดยใช้เนมสเปซที่เกี่ยวข้องกับองค์กรของตนเองอย่างชัดเจนและชัดเจน ข้อห้ามนี้คล้ายคลึงกับที่ระบุไว้สำหรับคลาสภาษา Java ใน หัวข้อ 3.6
3.2.3.4. ความตั้งใจในการออกอากาศ

แอปพลิเคชันของบริษัทอื่นอาศัยแพลตฟอร์มในการถ่ายทอดเจตนาบางอย่างเพื่อแจ้งให้ทราบถึงการเปลี่ยนแปลงในสภาพแวดล้อมของฮาร์ดแวร์หรือซอฟต์แวร์

การใช้งานอุปกรณ์:

  • [C-0-1] จะต้องออกอากาศการออกอากาศสาธารณะเพื่อตอบสนองต่อเหตุการณ์ระบบที่เหมาะสมตามที่อธิบายไว้ในเอกสาร SDK โปรดทราบว่าข้อกำหนดนี้ไม่ขัดแย้งกับส่วน 3.5 เนื่องจากข้อ จำกัด สำหรับแอปพลิเคชันพื้นหลังได้อธิบายไว้ในเอกสาร SDK
3.2.3.5. การตั้งค่าแอพเริ่มต้น

Android มีการตั้งค่าที่ให้ผู้ใช้เลือกแอปพลิเคชันเริ่มต้นได้อย่างง่ายดาย เช่น หน้าจอหลักหรือ SMS

ในกรณีที่สมเหตุสมผล การใช้งานอุปกรณ์จะต้องมีเมนูการตั้งค่าที่คล้ายกันและเข้ากันได้กับรูปแบบตัวกรอง Intent และวิธีการ API ที่อธิบายไว้ในเอกสารประกอบ SDK ด้านล่าง

หากการใช้งานอุปกรณ์รายงาน android.software.home_screen พวกเขา:

  • [C-1-1] ต้องให้เกียรติ android.settings.HOME_SETTINGS ตั้งใจที่จะแสดงเมนูการตั้งค่าแอพเริ่มต้นสำหรับหน้าจอหลัก

หากการใช้งานอุปกรณ์รายงาน android.hardware.telephony พวกเขา:

  • [C-2-1] ต้องจัดเตรียมเมนูการตั้งค่าที่จะเรียก android.provider.Telephony.ACTION_CHANGE_DEFAULT เจตนาเพื่อแสดงกล่องโต้ตอบเพื่อเปลี่ยนแอปพลิเคชัน SMS เริ่มต้น

  • [C-2-2] ต้องให้เกียรติ android.telecom.action.CHANGE_DEFAULT_DIALER ตั้งใจแสดงกล่องโต้ตอบเพื่อให้ผู้ใช้เปลี่ยนแอปพลิเคชันโทรศัพท์เริ่มต้น

    • ต้องใช้ UI ของแอพเริ่มต้นที่ผู้ใช้เลือกสำหรับการโทรเข้าและขาออกยกเว้นการโทรฉุกเฉินซึ่งจะใช้แอพโทรศัพท์ที่ติดตั้งไว้ล่วงหน้า
  • [C-2-3] จะต้องให้เกียรติ Android.telecom.action.change_phone_accounts ตั้งใจที่จะให้ผู้ใช้จ่ายเงินเพื่อกำหนด ConnectionServices ที่เกี่ยวข้องกับ PhoneAccounts เช่นเดียวกับการเริ่มต้นการเริ่มต้นที่ผู้ให้บริการโทรคมนาคมจะใช้การโทรออก การใช้งาน AOSP เป็นไปตามข้อกำหนดนี้โดยรวมเมนู "ตัวเลือกบัญชีการโทร" ภายในเมนูการตั้งค่า "การโทร"

หากการใช้งานอุปกรณ์รายงาน android.hardware.nfc.hce พวกเขา:

  • [C-3-1] ต้องให้เกียรติ Android.settings.nfc_payment_settings ตั้งใจที่จะแสดงเมนูการตั้งค่าแอปเริ่มต้นสำหรับการแตะและชำระเงิน

หากการใช้งานอุปกรณ์รองรับ VoiceInteractionService ชันมากกว่าหนึ่งแอปพลิเคชันโดยใช้ API นี้ติดตั้งในแต่ละครั้งพวกเขา:

  • [C-4-1] ต้องให้เกียรติ android.settings.ACTION_VOICE_INPUT_SETTINGS ตั้งใจที่จะแสดงเมนูการตั้งค่าแอปเริ่มต้นสำหรับการป้อนข้อมูลและความช่วยเหลือ

3.2.4. กิจกรรมในการแสดงทุติยภูมิ

หากการใช้งานอุปกรณ์อนุญาตให้เปิด กิจกรรม Android ปกติบนจอแสดงผลรองพวกเขา:

  • [C-1-1] ต้องตั้งค่า android.software.activities_on_secondary_displays
  • [C-1-2] ต้องรับประกันความเข้ากันได้ของ API คล้ายกับกิจกรรมที่ทำงานบนหน้าจอหลัก
  • [C-1-3] จะต้องลงจอดกิจกรรมใหม่บนจอแสดงผลเดียวกันกับกิจกรรมที่เปิดตัวเมื่อมีการเปิดตัวกิจกรรมใหม่โดยไม่ระบุการแสดงผลเป้าหมายผ่านกิจกรรม ActivityOptions.setLaunchDisplayId() API
  • [C-1-4] จะต้องทำลายกิจกรรมทั้งหมดเมื่อจอแสดงผลด้วย Display.FLAG_PRIVATE ถูกลบออก
  • [C-1-5] จะต้องปรับขนาดกิจกรรมทั้งหมดใน VirtualDisplay หากการแสดงผลนั้นถูกปรับขนาด
  • อาจแสดงตัวแก้ไข IME (อินพุตเมธอดการควบคุมผู้ใช้ที่ช่วยให้ผู้ใช้ป้อนข้อความ) บนจอแสดงผลหลักเมื่อฟิลด์อินพุตข้อความมุ่งเน้นไปที่จอแสดงผลรอง
  • ควรใช้การโฟกัสอินพุตบนจอแสดงผลรองโดยไม่ขึ้นกับการแสดงผลหลักเมื่อรองรับการสัมผัสหรืออินพุตคีย์
  • ควรมี android.content.res.Configuration ซึ่งสอดคล้องกับจอแสดงผลนั้นเพื่อแสดงทำงานอย่างถูกต้องและรักษาความเข้ากันได้หากมีการเปิดตัวกิจกรรมบนจอแสดงผลรอง

หากการใช้งานอุปกรณ์อนุญาตให้เปิด กิจกรรม Android ปกติบนจอแสดงผลรองและจอแสดงผลหลักและรองมี Android.util.displayMetrics แตกต่างกัน:

  • [C-2-1] กิจกรรมที่ไม่สามารถปรับเปลี่ยนได้ (ที่มี resizeableActivity=false ใน AndroidManifest.xml ) และแอพที่กำหนดเป้าหมาย API ระดับ 23 หรือต่ำกว่าจะต้องไม่ได้รับอนุญาตในจอแสดงผลรอง

หากการใช้งานอุปกรณ์อนุญาตให้เปิด กิจกรรม Android ปกติบนจอแสดงผลรองและจอแสดงผลรองมี Android.view.display.flag_private Flag:

  • [C-3-1] เฉพาะเจ้าของจอแสดงผลระบบและกิจกรรมที่มีอยู่แล้วบนจอแสดงผลนั้นจะต้องสามารถเปิดใช้งานได้ ทุกคนสามารถเปิดตัวจอแสดงผลที่มี Android.view.display.flag_public Flag

3.3. ความเข้ากันได้ของ API ดั้งเดิม

ความเข้ากันได้ของโค้ดเนทีฟเป็นสิ่งที่ท้าทาย ด้วยเหตุนี้ผู้ใช้อุปกรณ์จึงเป็น:

  • [SR] แนะนำอย่างยิ่งให้ใช้การใช้งานของไลบรารีที่แสดงด้านล่างจากโครงการโอเพ่นซอร์ส Android ต้นน้ำ

3.3.1. อินเทอร์เฟซไบนารีของแอปพลิเคชัน

รหัสไบต์ Dalvik ที่ได้รับการจัดการสามารถเรียกใช้โค้ดเนทีฟที่ให้ไว้ในไฟล์ .apk ของแอปพลิเคชัน โดยเป็นไฟล์ ELF .so ที่คอมไพล์สำหรับสถาปัตยกรรมฮาร์ดแวร์อุปกรณ์ที่เหมาะสม เนื่องจากโค้ดเนทิฟขึ้นอยู่กับเทคโนโลยีโปรเซสเซอร์พื้นฐานอย่างมาก Android จึงกำหนด Application Binary Interfaces (ABI) จำนวนหนึ่งใน Android NDK

การใช้งานอุปกรณ์:

  • [C-0-1] จะต้องเข้ากันได้กับ ABIs ที่กำหนดอย่างน้อยหนึ่งรายการและใช้งานความเข้ากันได้กับ Android NDK
  • [C-0-2] จะต้องรวมถึงการสนับสนุนรหัสที่ทำงานในสภาพแวดล้อมที่มีการจัดการเพื่อเรียกใช้รหัสดั้งเดิมโดยใช้ความหมายของอินเทอร์เฟซ Java Native (JNI) มาตรฐาน
  • [C-0-3] จะต้องเข้ากันได้กับแหล่งที่มา (เช่นส่วนหัวที่เข้ากันได้) และเข้ากันได้ไบนารี (สำหรับ ABI) กับไลบรารีที่ต้องการแต่ละรายการในรายการด้านล่าง
  • [C-0-5] ต้องรายงานอินเทอร์เฟซไบนารีแอปพลิเคชันดั้งเดิม (ABI) อย่างถูกต้องโดยอุปกรณ์ผ่าน android.os.Build.SUPPORTED_ABIS , android.os.Build.SUPPORTED_32_BIT_ABIS และ android.os.Build.SUPPORTED_64_BIT_ABIS แต่ละรายการที่แยกของเครื่องหมายจุลภาคของ ABIs ที่สั่งซื้อจากรายการมากที่สุดไปจนถึงรายการที่ต้องการน้อยที่สุด
  • [C-0-6] ต้องรายงานผ่านพารามิเตอร์ข้างต้นชุดย่อยของรายการ ABIs ต่อไปนี้และต้องไม่รายงาน ABI ใด ๆ ที่ไม่ได้อยู่ในรายการ

    • armeabi
    • armeabi-v7a
    • arm64-v8a
    • x86
    • x86-64
    • [C-0-7] ต้องสร้างไลบรารีต่อไปนี้ทั้งหมดให้บริการ API ดั้งเดิมพร้อมใช้งานสำหรับแอพที่มีรหัสดั้งเดิม:

    • libaaudio.so (การสนับสนุนเสียงดั้งเดิมของ Aaudio)

    • libandroid.so (รองรับกิจกรรม Android ดั้งเดิม)
    • libc (ไลบรารี C)
    • libcamera2ndk.so
    • libdl (ตัวเชื่อมโยงแบบไดนามิก)
    • libEGL.so (การจัดการพื้นผิว OpenGL ดั้งเดิม)
    • libGLESv1_CM.so (OpenGL ES 1.x)
    • libGLESv2.so (OpenGL ES 2.0)
    • libGLESv3.so (OpenGL ES 3.x)
    • libicui18n.so
    • libicuuc.so
    • libjnigraphics.so
    • liblog (การบันทึก Android)
    • libmediandk.so (รองรับ Native Media API)
    • libm (ห้องสมุดคณิตศาสตร์)
    • libneuralnetworks.so (Neural Networks API)
    • libOpenMAXAL.so (รองรับ OpenMAX AL 1.0.1)
    • libOpenSLES.so (รองรับเสียง OpenSL ES 1.0.1)
    • libRS.so
    • libstdc++ (รองรับ C++ น้อยที่สุด)
    • libvulkan.so (วัลแคน)
    • libz (การบีบอัด Zlib)
    • อินเทอร์เฟซ JNI
  • [C-0-8] ต้องไม่เพิ่มหรือลบฟังก์ชั่นสาธารณะสำหรับไลบรารีดั้งเดิมที่ระบุไว้ข้างต้น

  • [C-0-9] จะต้องแสดงรายการห้องสมุดที่ไม่ใช่ AOSP เพิ่มเติมที่สัมผัสโดยตรงกับแอพของบุคคลที่สามใน /vendor/etc/public.libraries.txt
  • [C-0-10] จะต้องไม่เปิดเผยห้องสมุดดั้งเดิมอื่น ๆ ที่ใช้และให้ใน AOSP เป็นไลบรารีระบบไปยังแอพของบุคคลที่สามที่กำหนดเป้าหมาย API ระดับ 24 หรือสูงกว่าตามที่สงวนไว้
  • [C-0-11] ต้องส่งออกสัญลักษณ์ฟังก์ชัน OpenGL ES 3.1 และ Android Extension Pack ทั้งหมดตามที่กำหนดไว้ใน NDK ผ่านห้องสมุด libGLESv3.so โปรดทราบว่าในขณะที่สัญลักษณ์ทั้งหมดจะต้องมีอยู่หัวข้อ 7.1.4.1 อธิบายรายละเอียดเพิ่มเติมเกี่ยวกับข้อกำหนดสำหรับเมื่อคาดว่าจะมีการใช้งานเต็มรูปแบบของแต่ละฟังก์ชั่นที่เกี่ยวข้อง
  • [C-0-12] ต้องส่งออกสัญลักษณ์ libvulkan.so ก์ชั่น VK_KHR_maintenance1 Core Vulkan 1.0 สัญลักษณ์ฟังก์ชั่นเช่นเดียวกับ VK_KHR_surface , VK_KHR_swapchain , VK_KHR_android_surface , VK_KHR_get_physical_device_properties2 โปรดทราบว่าในขณะที่สัญลักษณ์ทั้งหมดจะต้องมีอยู่หัวข้อ 7.1.4.2 อธิบายรายละเอียดเพิ่มเติมเกี่ยวกับข้อกำหนดสำหรับเมื่อคาดว่าจะมีการใช้งานเต็มรูปแบบของแต่ละฟังก์ชั่นที่เกี่ยวข้อง
  • ควรสร้างขึ้นโดยใช้ซอร์สโค้ดและไฟล์ส่วนหัวที่มีอยู่ในอัปสตรีม Android Open Source Project

โปรดทราบว่าการเผยแพร่ในอนาคตของ Android อาจแนะนำการสนับสนุนสำหรับ ABIs เพิ่มเติม

3.3.2. ความเข้ากันได้ของโค้ดเนทิฟ ARM 32 บิต

หากการใช้งานอุปกรณ์รายงานการสนับสนุนของ armeabi ABI พวกเขา:

  • [C-3-1] จะต้องสนับสนุน armeabi-v7a และรายงานการสนับสนุนเนื่องจาก armeabi เป็นเพียงการเข้ากันได้ย้อนหลังกับแอพรุ่นเก่าเท่านั้น

หากการใช้งานอุปกรณ์รายงานการสนับสนุนของ armeabi-v7a abi สำหรับแอพที่ใช้ ABI นี้พวกเขา:

  • [C-2-1] ต้องรวมบรรทัดต่อไปนี้ใน /proc/cpuinfo และไม่ควรเปลี่ยนค่าบนอุปกรณ์เดียวกันแม้ว่าจะอ่านโดย ABIs อื่น ๆ

    • Features: ตามด้วยรายการคุณสมบัติ ARMV7 CPU เสริมใด ๆ ที่รองรับโดยอุปกรณ์
    • CPU architecture: ตามด้วยจำนวนเต็มที่อธิบายถึงสถาปัตยกรรมแขนที่รองรับสูงสุดของอุปกรณ์ (เช่น "8" สำหรับอุปกรณ์ ARMV8)
  • [C-2-2] จะต้องดำเนินการต่อไปนี้เสมอแม้ในกรณีที่ ABI ถูกนำไปใช้กับสถาปัตยกรรม ARMV8 ไม่ว่าจะผ่านการสนับสนุน CPU ดั้งเดิมหรือผ่านการจำลองซอฟต์แวร์:

    • คำแนะนำ SWP และ SWPB
    • คำแนะนำการตั้งค่า
    • CP15ISB, CP15DSB และ CP15DMB การดำเนินงานอุปสรรค
  • [C-2-3] ต้องมีการสนับสนุนส่วนขยาย SIMD ขั้นสูง (AKA Neon)

3.4. ความเข้ากันได้ของเว็บ

3.4.1. ความเข้ากันได้ของ WebView

หากการใช้งานอุปกรณ์ให้การใช้งานที่สมบูรณ์ของ android.webkit.Webview API พวกเขา:

  • [C-1-1] ต้องรายงาน android.software.webview
  • [C-1-2] ต้องใช้การสร้างโครงการ โครเมียม จากโครงการโอเพนซอร์ส Android ต้นน้ำบนสาขา Android 9 สำหรับการใช้งานของ android.webkit.WebView API
  • [C-1-3] สตริงตัวแทนผู้ใช้ที่รายงานโดย WebView ต้องอยู่ในรูปแบบนี้:

    Mozilla/5.0 (Linux; Android $ (เวอร์ชัน); [$ (รุ่น)] [build/$ (build)]; WV) Applewebkit/537.36 (khtml เช่น Gecko) เวอร์ชัน/4.0 $ (Chromium_ver) มือถือ Safari/537.36

    • ค่าของสตริง $(VERSION) จะต้องเหมือนกับค่าสำหรับ android.os.Build.VERSION.RELEASE
    • สตริง $ (รุ่น) อาจว่างเปล่า แต่ถ้ามันไม่ว่างเปล่าก็ต้องมีค่าเท่ากับ Android.os.build.model
    • "build/$ (build)" อาจถูกละเว้น แต่ถ้ามันมีอยู่ในสตริง $ (build) จะต้องเหมือนกับค่าสำหรับ Android.os.build.id
    • ค่าของสตริง $(CHROMIUM_VER) ต้องเป็นเวอร์ชันของ Chromium ในอัปสตรีม Android Open Source Project
    • การใช้งานอุปกรณ์อาจละเว้นอุปกรณ์เคลื่อนที่ในสตริงตัวแทนผู้ใช้
  • คอมโพเนนต์ WebView ควรรวมการรองรับฟีเจอร์ HTML5 ให้ได้มากที่สุด และหากรองรับฟีเจอร์นั้นควรเป็นไปตาม ข้อกำหนด HTML5

3.4.2. ความเข้ากันได้ของเบราว์เซอร์

หากการใช้งานอุปกรณ์รวมแอปพลิเคชันเบราว์เซอร์แบบสแตนด์อโลนสำหรับการท่องเว็บทั่วไปพวกเขา:

  • [C-1-1] ต้องสนับสนุน API เหล่านี้แต่ละรายการที่เกี่ยวข้องกับ HTML5:
  • [C-1-2] ต้องรองรับ HTML5/W3C WebStorage API และควรรองรับ HTML5/W3C IndexedDB API โปรดทราบว่าในขณะที่หน่วยงานมาตรฐานการพัฒนาเว็บกำลังเปลี่ยนมาใช้ IndexedDB มากกว่าพื้นที่เก็บข้อมูลบนเว็บ IndexedDB คาดว่าจะกลายเป็นองค์ประกอบที่จำเป็นใน Android เวอร์ชันอนาคต
  • อาจจัดส่งสตริงตัวแทนผู้ใช้ที่กำหนดเองในแอปพลิเคชันเบราว์เซอร์แบบสแตนด์อโลน
  • ควรใช้การสนับสนุน HTML5 ให้มากที่สุดเท่าที่จะเป็นไปได้ในแอปพลิเคชันเบราว์เซอร์แบบสแตนด์อโลน (ไม่ว่าจะขึ้นอยู่กับแอปพลิเคชันเบราว์เซอร์ WebKit อัปสตรีมหรือการเปลี่ยนบุคคลที่สาม)

อย่างไรก็ตามหากการใช้งานอุปกรณ์ไม่รวมแอปพลิเคชันเบราว์เซอร์แบบสแตนด์อโลนพวกเขา:

  • [C-2-1] จะต้องสนับสนุนรูปแบบความตั้งใจสาธารณะตามที่อธิบายไว้ใน ส่วน 3.2.3.1

3.5. ความเข้ากันได้ของพฤติกรรม API

การใช้งานอุปกรณ์:

  • [C-0-9] ต้องตรวจสอบให้แน่ใจว่าความเข้ากันได้ของพฤติกรรม API ถูกนำไปใช้สำหรับแอพที่ติดตั้งทั้งหมดเว้นแต่ว่าจะถูก จำกัด ตามที่อธิบายไว้ใน ส่วน 3.5.1
  • [C-0-10] จะต้องไม่ใช้วิธีการจัดรายการที่ให้ความมั่นใจกับความเข้ากันได้ของพฤติกรรม API เฉพาะสำหรับแอพที่เลือกโดยผู้ใช้อุปกรณ์

ลักษณะการทำงานของ API แต่ละประเภท (แบบจัดการ, แบบซอฟต์, แบบเนทีฟ และแบบเว็บ) จะต้องสอดคล้องกับการใช้งานที่ต้องการของอัปสตรีม Android Open Source Project ความเข้ากันได้เฉพาะด้านได้แก่:

  • [C-0-1] อุปกรณ์จะต้องไม่เปลี่ยนพฤติกรรมหรือความหมายของเจตนามาตรฐาน
  • [C-0-2] อุปกรณ์จะต้องไม่เปลี่ยนความหมายของวงจรชีวิตหรือวงจรชีวิตของส่วนประกอบของระบบประเภทใดประเภทหนึ่ง (เช่นบริการ, กิจกรรม, กิจกรรม, ผู้ที่มีเนื้อหา, ฯลฯ )
  • [C-0-3] อุปกรณ์จะต้องไม่เปลี่ยนความหมายของการอนุญาตมาตรฐาน
  • อุปกรณ์จะต้องไม่เปลี่ยนแปลงข้อ จำกัด ที่บังคับใช้ในแอปพลิเคชันพื้นหลัง โดยเฉพาะอย่างยิ่งสำหรับแอพพื้นหลัง:
    • [C-0-4] พวกเขาจะต้องหยุดเรียกใช้การโทรกลับที่ลงทะเบียนโดยแอพเพื่อรับเอาต์พุตจาก GnssMeasurement และ GnssNavigationMessage
    • [C-0-5] พวกเขาจะต้อง จำกัด อัตราความถี่ของการอัปเดตที่ให้กับแอพผ่านคลาส LocationManager API หรือวิธี WifiManager.startScan()
    • [C-0-6] หากแอปกำลังกำหนดเป้าหมาย API ระดับ 25 หรือสูงกว่าพวกเขาจะต้องไม่อนุญาตให้ลงทะเบียนเครื่องรับสัญญาณออกอากาศสำหรับการออกอากาศโดยนัยของ Intents Android มาตรฐานในรายการของแอปเว้นแต่ความตั้งใจออกอากาศจะต้องใช้ "signature" หรือ "signatureOrSystem" การอนุญาต protectionLevel หรืออยู่ใน รายการยกเว้น
    • [C-0-7] หากแอพกำหนดเป้าหมาย API ระดับ 25 หรือสูงกว่าพวกเขาจะต้องหยุดบริการพื้นหลังของแอปราวกับว่าแอปเรียกใช้วิธีการของ Services ' stopSelf() เว้นแต่แอปจะถูกวางไว้ใน ALLEDLIST ชั่วคราว เพื่อจัดการงานที่ผู้ใช้มองเห็นได้
    • [C-0-8] หากแอพกำหนดเป้าหมาย API ระดับ 25 หรือสูงกว่าพวกเขาจะต้องปล่อย Wakelocks ที่แอปถืออยู่
  • [C-0-9] อุปกรณ์จะต้องส่งคืนผู้ให้บริการด้านความปลอดภัยต่อไปนี้เป็นค่าอาร์เรย์เจ็ดค่าแรกจากวิธี Security.getProviders() Provider.getName() ลำดับที่กำหนดและด้วยชื่อที่กำหนด เว้นแต่แอปได้แก้ไขรายการผ่าน insertProviderAt() หรือ removeProvider() อุปกรณ์อาจส่งคืนผู้ให้บริการเพิ่มเติมหลังจากรายการผู้ให้บริการที่ระบุด้านล่าง
    1. Androidnssp - android.security.net.config.NetworkSecurityConfigProvider
    2. Androidopenssl - com.android.org.conscrypt.OpenSSLProvider
    3. CERTATHPROVIDER - sun.security.provider.CertPathProvider
    4. AndroidKeyStoreBcWorkaround - android.security.keystore.AndroidKeyStoreBCWorkaroundProvider
    5. BC - com.android.org.bouncycastle.jce.provider.BouncyCastleProvider
    6. harmonyjsse - com.android.org.conscrypt.JSSEProvider
    7. Androidkeystore - android.security.keystore.AndroidKeyStoreProvider

รายการข้างต้นไม่ครอบคลุมทั้งหมด ชุดทดสอบความเข้ากันได้ (CTS) จะทดสอบส่วนสำคัญของแพลตฟอร์มเพื่อดูความเข้ากันได้ทางพฤติกรรม แต่ไม่ใช่ทั้งหมด เป็นความรับผิดชอบของผู้นำไปใช้ในการตรวจสอบความเข้ากันได้ทางพฤติกรรมกับโครงการ Android Open Source ด้วยเหตุนี้ ผู้ติดตั้งอุปกรณ์จึงควรใช้ซอร์สโค้ดที่มีอยู่ในโครงการ Android Open Source หากเป็นไปได้ แทนที่จะปรับใช้ส่วนสำคัญของระบบอีกครั้ง

3.5.1. ข้อ จำกัด พื้นหลัง

หากการใช้งานอุปกรณ์ใช้ข้อ จำกัด แอปที่รวมอยู่ใน AOSP หรือขยายข้อ จำกัด แอปพวกเขา:

  • [C-SR] ขอแนะนำอย่างยิ่งเพื่อให้ผู้ใช้จ่ายในกรณีที่ผู้ใช้สามารถดูรายการแอพที่ จำกัด
  • [C-1-2] จะต้องจัดหาเงินทุนให้กับผู้ใช้เพื่อเปิด / ปิดข้อ จำกัด ในแต่ละแอพ
  • [C-1-3] จะต้องไม่ใช้ข้อ จำกัด โดยอัตโนมัติโดยไม่มีหลักฐานของพฤติกรรมสุขภาพของระบบที่ไม่ดี แต่อาจใช้ข้อ จำกัด กับแอพในการตรวจหาพฤติกรรมสุขภาพของระบบที่ไม่ดีเช่น Wakelocks ที่ติดอยู่บริการวิ่งระยะยาวและเกณฑ์อื่น ๆ เกณฑ์อาจถูกกำหนดโดยผู้ใช้อุปกรณ์ แต่ต้องเกี่ยวข้องกับผลกระทบของแอปต่อสุขภาพของระบบ เกณฑ์อื่น ๆ ที่ไม่เกี่ยวข้องกับสุขภาพของระบบอย่างหมดจดเช่นการขาดความนิยมของแอพในตลาดจะต้องไม่ถูกใช้เป็นเกณฑ์
  • [C-1-4] จะต้องไม่ใช้ข้อ จำกัด แอปโดยอัตโนมัติสำหรับแอพเมื่อผู้ใช้ปิดข้อ จำกัด แอปด้วยตนเองและอาจแนะนำให้ผู้ใช้ใช้ข้อ จำกัด แอป
  • [C-1-5] ต้องแจ้งให้ผู้ใช้ทราบหากมีการใช้แอป จำกัด กับแอพโดยอัตโนมัติหรือไม่
  • [C-1-6] จะต้องส่งคืน true สำหรับ ActivityManager.isBackgroundRestricted() เมื่อแอพที่ จำกัด เรียก API นี้
  • [C-1-7] จะต้องไม่ จำกัด แอพเบื้องหน้าด้านหน้าที่ผู้ใช้ใช้อย่างชัดเจน
  • [C-1-8] ต้องระงับข้อ จำกัด ในแอพที่กลายเป็นแอปพลิเคชันเบื้องหน้าชั้นนำเมื่อผู้ใช้เริ่มใช้แอพที่เคยถูก จำกัด อย่างชัดเจน
  • [C-1-9] ต้องรายงานเหตุการณ์ จำกัด แอปทั้งหมดผ่าน UsageStats หากการใช้งานอุปกรณ์ขยายข้อ จำกัด แอปที่ใช้ใน AOSP ต้องปฏิบัติตามการใช้งานที่อธิบายไว้ใน เอกสารนี้

3.6. เนมสเปซ API

Android เป็นไปตามแบบแผนเนมสเปซแพ็คเกจและคลาสที่กำหนดโดยภาษาการเขียนโปรแกรม Java เพื่อให้มั่นใจถึงความเข้ากันได้กับแอปพลิเคชันบุคคลที่สาม ผู้ใช้อุปกรณ์จะต้องไม่ทำการแก้ไขใด ๆ ที่ต้องห้าม (ดูด้านล่าง) ในเนมสเปซแพ็คเกจเหล่านี้:

  • java.*
  • javax.*
  • sun.*
  • android.*
  • androidx.*
  • com.android.*

นั่นคือพวกเขา:

  • [C-0-1] จะต้องไม่แก้ไข API ที่เปิดเผยต่อสาธารณะบนแพลตฟอร์ม Android โดยการเปลี่ยนวิธีการหรือลายเซ็นคลาสใด ๆ หรือโดยการลบคลาสหรือฟิลด์คลาส
  • [C-0-2] จะต้องไม่เพิ่มองค์ประกอบที่เปิดเผยต่อสาธารณะ (เช่นคลาสหรืออินเทอร์เฟซหรือฟิลด์หรือวิธีการในคลาสหรืออินเทอร์เฟซที่มีอยู่) หรือทดสอบหรือระบบ APIs ไปยัง APIs ในเนมสเปซด้านบน “ องค์ประกอบที่เปิดเผยต่อสาธารณะ” เป็นโครงสร้างใด ๆ ที่ไม่ได้ตกแต่งด้วยเครื่องหมาย“ @hide” ที่ใช้ในซอร์สโค้ด Android ต้นน้ำ

ผู้ใช้อุปกรณ์อาจปรับเปลี่ยนการใช้งาน APIs พื้นฐาน แต่การแก้ไขดังกล่าว:

  • [C-0-3] จะต้องไม่ส่งผลกระทบต่อพฤติกรรมที่ระบุและลายเซ็นภาษา Java ของ API ที่เปิดเผยต่อสาธารณะ
  • [C-0-4] จะต้องไม่โฆษณาหรือสัมผัสกับนักพัฒนา

อย่างไรก็ตามผู้ใช้อุปกรณ์อาจเพิ่ม API ที่กำหนดเองนอกเนมสเปซ Android มาตรฐาน แต่ APIs ที่กำหนดเอง:

  • [C-0-5] จะต้องไม่อยู่ในเนมสเปซที่เป็นเจ้าของหรืออ้างถึงองค์กรอื่น ตัวอย่างเช่น ผู้ใช้อุปกรณ์ต้องไม่เพิ่ม API ลงใน com.google.* หรือเนมสเปซที่คล้ายกัน มีเพียง Google เท่านั้นที่สามารถทำได้ ในทำนองเดียวกัน Google ต้องไม่เพิ่ม API ไปยังเนมสเปซของบริษัทอื่น
  • [C-0-6] จะต้องบรรจุในไลบรารีที่ใช้ร่วมกันของ Android เพื่อให้มีเพียงแอพที่ใช้งานอย่างชัดเจน (ผ่านกลไก <Sise-Library>) เท่านั้นที่ได้รับผลกระทบจากการใช้หน่วยความจำที่เพิ่มขึ้นของ API ดังกล่าว

หากผู้ดำเนินการอุปกรณ์เสนอให้ปรับปรุงเนมสเปซแพ็คเกจใดรายการหนึ่งข้างต้น (เช่น โดยการเพิ่มฟังก์ชันการทำงานใหม่ที่เป็นประโยชน์ให้กับ API ที่มีอยู่ หรือการเพิ่ม API ใหม่) ผู้ดำเนินการควรไปที่ source.android.com และเริ่มกระบวนการสนับสนุนการเปลี่ยนแปลงและ รหัสตามข้อมูลบนเว็บไซต์นั้น

โปรดทราบว่าข้อจำกัดข้างต้นสอดคล้องกับแบบแผนมาตรฐานสำหรับการตั้งชื่อ API ในภาษาการเขียนโปรแกรม Java ส่วนนี้มีจุดมุ่งหมายเพื่อเสริมสร้างแบบแผนเหล่านั้นและทำให้มีผลผูกพันผ่านการรวมไว้ในคำจำกัดความความเข้ากันได้นี้

3.7. ความเข้ากันได้รันไทม์

การใช้งานอุปกรณ์:

  • [C-0-1] ต้องรองรับรูปแบบ Dalvik Executable (DEX) เต็มรูปแบบและ ข้อกำหนดของ Dalvik bytecode และความหมาย

  • [C-0-2] ต้องกำหนดค่า Dalvik Runtimes เพื่อจัดสรรหน่วยความจำตามแพลตฟอร์ม Android ต้นน้ำและตามที่ระบุไว้ในตารางต่อไปนี้ (ดู หัวข้อ 7.1.1 สำหรับขนาดหน้าจอและคำจำกัดความความหนาแน่นของหน้าจอ)

  • ควรใช้ Android Runtime (ART) การใช้งานการอ้างอิงต้นน้ำของรูปแบบการดำเนินการ Dalvik และระบบการจัดการแพ็คเกจของการใช้งานอ้างอิง

  • ควรเรียกใช้การทดสอบฟัซซี่ภายใต้โหมดการดำเนินการต่างๆและสถาปัตยกรรมเป้าหมายเพื่อให้มั่นใจถึงความเสถียรของรันไทม์ อ้างถึง JFuzz และ Dexfuzz ในเว็บไซต์โครงการ Android Open Source

โปรดทราบว่าค่าหน่วยความจำที่ระบุด้านล่างนี้ถือเป็นค่าต่ำสุด และการใช้งานอุปกรณ์อาจจัดสรรหน่วยความจำเพิ่มเติมต่อแอปพลิเคชัน

เค้าโครงหน้าจอ ความหนาแน่นของหน้าจอ หน่วยความจำแอปพลิเคชันขั้นต่ำ
นาฬิกาแอนดรอยด์ 120 จุดต่อนิ้ว (ldpi) 32MB
160 dpi (mdpi)
213 จุดต่อนิ้ว (tvdpi)
240 จุดต่อนิ้ว (hdpi) 36MB
280 จุดต่อนิ้ว (280 จุดต่อนิ้ว)
320 จุดต่อนิ้ว (xhdpi) 48MB
360 จุดต่อนิ้ว (360 จุดต่อนิ้ว)
400 จุดต่อนิ้ว (400 จุดต่อนิ้ว) 56MB
420 จุดต่อนิ้ว (420 จุดต่อนิ้ว) 64MB
480 จุดต่อนิ้ว (xxhdpi) 88MB
560 จุดต่อนิ้ว (560 จุดต่อนิ้ว) 112MB
640 จุดต่อนิ้ว (xxxhdpi) 154MB
เล็ก/ปกติ 120 จุดต่อนิ้ว (ldpi) 32MB
160 dpi (mdpi)
213 จุดต่อนิ้ว (tvdpi) 48MB
240 จุดต่อนิ้ว (hdpi)
280 จุดต่อนิ้ว (280 จุดต่อนิ้ว)
320 จุดต่อนิ้ว (xhdpi) 80MB
360 จุดต่อนิ้ว (360 จุดต่อนิ้ว)
400 จุดต่อนิ้ว (400 จุดต่อนิ้ว) 96MB
420 จุดต่อนิ้ว (420 จุดต่อนิ้ว) 112MB
480 จุดต่อนิ้ว (xxhdpi) 128MB
560 จุดต่อนิ้ว (560 จุดต่อนิ้ว) 192MB
640 จุดต่อนิ้ว (xxxhdpi) 256MB
ใหญ่ 120 จุดต่อนิ้ว (ldpi) 32MB
160 dpi (mdpi) 48MB
213 จุดต่อนิ้ว (tvdpi) 80MB
240 จุดต่อนิ้ว (hdpi)
280 จุดต่อนิ้ว (280 จุดต่อนิ้ว) 96MB
320 จุดต่อนิ้ว (xhdpi) 128MB
360 จุดต่อนิ้ว (360 จุดต่อนิ้ว) 160MB
400 จุดต่อนิ้ว (400 จุดต่อนิ้ว) 192MB
420 จุดต่อนิ้ว (420 จุดต่อนิ้ว) 228MB
480 จุดต่อนิ้ว (xxhdpi) 256MB
560 จุดต่อนิ้ว (560 จุดต่อนิ้ว) 384MB
640 จุดต่อนิ้ว (xxxhdpi) 512MB
xlarge 120 จุดต่อนิ้ว (ldpi) 48MB
160 dpi (mdpi) 80MB
213 จุดต่อนิ้ว (tvdpi) 96MB
240 จุดต่อนิ้ว (hdpi)
280 จุดต่อนิ้ว (280 จุดต่อนิ้ว) 144MB
320 จุดต่อนิ้ว (xhdpi) 192MB
360 จุดต่อนิ้ว (360 จุดต่อนิ้ว) 240MB
400 จุดต่อนิ้ว (400 จุดต่อนิ้ว) 288MB
420 จุดต่อนิ้ว (420 จุดต่อนิ้ว) 336MB
480 จุดต่อนิ้ว (xxhdpi) 384MB
560 จุดต่อนิ้ว (560 จุดต่อนิ้ว) 576MB
640 จุดต่อนิ้ว (xxxhdpi) 768MB

3.8. ความเข้ากันได้ของส่วนต่อประสานผู้ใช้

3.8.1. ตัวเรียกใช้ (หน้าจอหลัก)

Android มีแอปพลิเคชันตัวเรียกใช้งาน (หน้าจอหลัก) และการสนับสนุนแอปพลิเคชันบุคคลที่สามเพื่อแทนที่ตัวเรียกใช้งานอุปกรณ์ (หน้าจอหลัก)

หากการใช้งานอุปกรณ์อนุญาตให้แอปพลิเคชันของบุคคลที่สามสามารถแทนที่หน้าจอหลักอุปกรณ์ได้พวกเขา:

  • [C-1-1] ต้องประกาศคุณสมบัติแพลตฟอร์ม android.software.home_screen
  • [C-1-2] ต้องส่งคืนวัตถุ AdaptiveIconDrawable เมื่อแอปพลิเคชันของบุคคลที่สามใช้แท็ก <adaptive-icon> เพื่อให้ไอคอนของพวกเขาและวิธีการ PackageManager เพื่อดึงไอคอนเรียกว่า

หากการใช้งานอุปกรณ์มีตัวเรียกใช้งานเริ่มต้นที่รองรับการตรึงทางลัดในแอพพวกเขา:

  • [C-2-1] ต้องรายงาน true สำหรับ ShortcutManager.isRequestPinShortcutSupported()
  • [C-2-2] ต้องมีผู้ใช้จ่ายเงินถามผู้ใช้ก่อนที่จะเพิ่มทางลัดที่ร้องขอโดยแอพผ่านทางลัด ShortcutManager.requestPinShortcut() วิธี API
  • [C-2-3] ต้องรองรับทางลัดที่ถูกตรึงและทางลัดแบบไดนามิกและแบบคงที่ตามที่บันทึกไว้ใน หน้าแอพทางลัด

ในทางกลับกันหากการใช้งานอุปกรณ์ไม่รองรับการตรึงทางลัดในแอพพวกเขา:

หากการใช้งานอุปกรณ์ใช้งานตัวเรียกใช้งานเริ่มต้นที่ให้การเข้าถึงทางลัดเพิ่มเติมอย่างรวดเร็วโดยแอพของบุคคลที่สามผ่าน ทางลัด API พวกเขา:

  • [C-4-1] ต้องรองรับคุณสมบัติทางลัดที่บันทึกไว้ทั้งหมด (เช่นทางลัดแบบคงที่และแบบไดนามิก, ทางลัดที่ตรึง) และใช้ APIs ของคลาส API ShortcutManager อย่างเต็มที่

หากการใช้งานอุปกรณ์รวมแอพ Launcher เริ่มต้นที่แสดงป้ายสำหรับไอคอนแอพพวกเขา:

  • [C-5-1] ต้องเคารพวิธี NotificationChannel.setShowBadge() API กล่าวอีกนัยหนึ่งแสดงการจ่ายภาพที่เกี่ยวข้องกับไอคอนแอพหากค่าถูกตั้งค่าเป็น true และไม่แสดงรูปแบบการติดเชื้อไอคอนแอพใด ๆ เมื่อช่องสัญญาณแจ้งเตือนทั้งหมดของแอปตั้งค่าเป็น false
  • อาจแทนที่ป้ายไอคอนแอพด้วยรูปแบบป้ายประกาศที่เป็นกรรมสิทธิ์ของพวกเขาเมื่อแอปพลิเคชันของบุคคลที่สามระบุการสนับสนุนของรูปแบบการป้ายที่เป็นกรรมสิทธิ์ผ่านการใช้ API ที่เป็นกรรมสิทธิ์ Notification.Builder.setNumber() และ Notification.Builder.setBadgeIconType() API

3.8.2. วิดเจ็ต

Android รองรับวิดเจ็ตแอพของบุคคลที่สามโดยการกำหนดประเภทส่วนประกอบและ API และวงจรชีวิตที่เกี่ยวข้องที่ช่วยให้แอปพลิเคชันแสดง “ AppWidget” ให้กับผู้ใช้ปลายทาง

หากการใช้งานอุปกรณ์สนับสนุนวิดเจ็ตแอพของบุคคลที่สามพวกเขา:

  • [C-1-1] ต้องประกาศการสนับสนุนคุณสมบัติแพลตฟอร์ม android.software.app_widgets
  • [C-1-2] จะต้องมีการสนับสนุนในตัวสำหรับ AppWidGets และเปิดเผยส่วนต่อประสานผู้ใช้เพื่อเพิ่มกำหนดค่าดูและลบ AppWidGets โดยตรงภายในตัวเรียกใช้งาน
  • [C-1-3] จะต้องมีความสามารถในการเรนเดอร์วิดเจ็ตที่มีขนาด 4 x 4 ในขนาดกริดมาตรฐาน ดู เครื่องมือออกแบบแอพ DesignGuidelines ในเอกสาร Android SDK สำหรับรายละเอียด
  • อาจรองรับวิดเจ็ตแอปพลิเคชันบนหน้าจอล็อค

หากการใช้งานอุปกรณ์รองรับวิดเจ็ตแอพของบุคคลที่สามและการตรึงทางลัดในแอพพวกเขา:

3.8.3. การแจ้งเตือน

Android รวมถึง APIs Notification และ NotificationManager ที่อนุญาตให้นักพัฒนาแอปบุคคลที่สามแจ้งให้ผู้ใช้ทราบถึงเหตุการณ์ที่โดดเด่นและดึงดูดความสนใจของผู้ใช้โดยใช้ส่วนประกอบฮาร์ดแวร์ (เช่นเสียงการสั่นสะเทือนและแสง) และคุณสมบัติซอฟต์แวร์ (เช่นการแจ้งเตือนแถบระบบ) ของอุปกรณ์ของอุปกรณ์ .

3.8.3.1 การนำเสนอการแจ้งเตือน

หากการใช้งานอุปกรณ์อนุญาตให้แอพของบุคคลที่สาม แจ้งให้ผู้ใช้ทราบถึงเหตุการณ์ที่โดดเด่น พวกเขา:

  • [C-1-1] ต้องสนับสนุนการแจ้งเตือนที่ใช้คุณสมบัติฮาร์ดแวร์ตามที่อธิบายไว้ในเอกสารประกอบ SDK และเท่าที่เป็นไปได้ด้วยฮาร์ดแวร์การใช้งานอุปกรณ์ ตัวอย่างเช่น หากการใช้งานอุปกรณ์มีเครื่องสั่นด้วย อุปกรณ์นั้นจะต้องใช้ API การสั่นสะเทือนอย่างถูกต้อง หากการใช้งานอุปกรณ์ขาดฮาร์ดแวร์ API ที่เกี่ยวข้องจะต้องถูกนำไปใช้แบบไม่ต้องดำเนินการ ลักษณะการทำงานนี้มีรายละเอียดเพิ่มเติมใน ส่วนที่ 7
  • [C-1-2] ต้องแสดง ทรัพยากร ทั้งหมดอย่างถูกต้อง (ไอคอนไฟล์ภาพเคลื่อนไหว ฯลฯ ) ที่มีให้ใน APIs หรือใน คู่มือสไตล์ไอคอน สถานะ/แถบระบบแม้ว่าพวกเขาอาจให้ประสบการณ์ผู้ใช้ทางเลือกสำหรับการแจ้งเตือนมากกว่านั้น จัดทำโดยการอ้างอิงการใช้งาน Open Source Android
  • [C-1-3] จะต้องให้เกียรติและดำเนินการอย่างถูกต้องพฤติกรรมที่อธิบายไว้สำหรับ APIs เพื่ออัปเดตลบและการแจ้งเตือนกลุ่ม
  • [C-1-4] ต้องให้พฤติกรรมเต็มรูปแบบของ API NotificationChannel ที่บันทึกไว้ใน SDK
  • [C-1-5] จะต้องจัดเตรียมการจ่ายเงินให้ผู้ใช้เพื่อบล็อกและแก้ไขการแจ้งเตือนของแอพของบุคคลที่สามต่อแต่ละช่องและระดับแพ็คเกจแอพ
  • [C-1-6] จะต้องจัดหาเงินทุนของผู้ใช้เพื่อแสดงช่องการแจ้งเตือนที่ถูกลบ
  • [C-1-7] จะต้องแสดงทรัพยากรทั้งหมดอย่างถูกต้อง (รูปภาพ, สติกเกอร์, ไอคอน ฯลฯ ) ที่ให้ผ่าน การแจ้งเตือนการส่ง ข้อความสไตล์ควบคู่ไปกับข้อความการแจ้งเตือนโดยไม่ต้องมีปฏิสัมพันธ์กับผู้ใช้เพิ่มเติม ตัวอย่างเช่นต้องแสดงทรัพยากรทั้งหมดรวมถึงไอคอนที่ให้ผ่าน Android.app.person ในการสนทนากลุ่มที่ตั้งค่าผ่าน SetGroupConversation
  • [C-SR] ขอแนะนำอย่างยิ่งในการสร้างรายได้จากผู้ใช้โดยอัตโนมัติเพื่อบล็อกการแจ้งเตือนของแอพของบุคคลที่สามต่อแต่ละช่องและระดับแพ็คเกจแอพหลังจากผู้ใช้ยกเลิกการแจ้งเตือนหลายครั้ง
  • ควรสนับสนุนการแจ้งเตือนที่หลากหลาย
  • ควรนำเสนอการแจ้งเตือนลำดับความสำคัญที่สูงกว่าเป็นการแจ้งเตือนแบบหัวขึ้น
  • ควรมีการจ่ายเงินให้ผู้ใช้เพื่อการแจ้งเตือนแบบเลื่อน
  • อาจจัดการการมองเห็นและเวลาของแอพของบุคคลที่สามสามารถแจ้งให้ผู้ใช้ทราบถึงเหตุการณ์ที่โดดเด่นเพื่อลดปัญหาด้านความปลอดภัยเช่นการเบี่ยงเบนความสนใจของไดรเวอร์

หากการใช้งานอุปกรณ์สนับสนุนการแจ้งเตือนที่หลากหลายพวกเขา:

  • [C-2-1] จะต้องใช้ทรัพยากรที่แน่นอนตามที่ให้ผ่านคลาส API Notification.Style และคลาสย่อยสำหรับองค์ประกอบทรัพยากรที่นำเสนอ
  • ควรนำเสนอองค์ประกอบทรัพยากรแต่ละรายการ (เช่นไอคอนชื่อเรื่องและข้อความสรุป) ที่กำหนดไว้ในคลาส Notification.Style API คลาส API และคลาสย่อย

หากการใช้งานอุปกรณ์สนับสนุนการแจ้งเตือนแบบหัวขึ้น: พวกเขา:

  • [C-3-1] จะต้องใช้มุมมองการแจ้งเตือนและทรัพยากรการแจ้งเตือนแบบหัวตามที่อธิบายไว้ในการแจ้งเตือนระดับ API Notification.Builder เมื่อนำเสนอการแจ้งเตือนแบบหัวขึ้น
  • [C-3-2] จะต้องแสดงการกระทำที่ให้ผ่าน Notification.Builder.addAction() พร้อมกับเนื้อหาการแจ้งเตือนโดยไม่ต้องมีปฏิสัมพันธ์กับผู้ใช้เพิ่มเติมตามที่อธิบายไว้ใน SDK
3.8.3.2 บริการผู้ฟังการแจ้งเตือน

Android รวมถึง APIs NotificationListenerService ที่อนุญาตให้แอป (เมื่อเปิดใช้งานโดยผู้ใช้อย่างชัดเจน) เพื่อรับสำเนาการแจ้งเตือนทั้งหมดตามที่โพสต์หรืออัปเดต

หากการใช้งานอุปกรณ์รายงานการตั้งค่าสถานะ Featural android.hardware.ram.normal พวกเขา:

  • [C-1-1] จะต้องอัปเดตการแจ้งเตือนอย่างถูกต้องและทันทีอย่างสมบูรณ์ไปยังบริการผู้ฟังที่ติดตั้งและผู้ใช้ที่เปิดใช้งานทั้งหมดรวมถึงข้อมูลเมตาใด ๆ ที่แนบมากับวัตถุการแจ้งเตือน
  • [C-1-2] ต้องเคารพการโทร snoozeNotification() API และยกเลิกการแจ้งเตือนและทำการโทรกลับหลังจากระยะเวลาการเลื่อนที่ตั้งไว้ในการโทร API

หากการใช้งานอุปกรณ์มีค่าใช้จ่ายของผู้ใช้ในการแจ้งเตือนแบบเลื่อน

  • [C-2-1] จะต้องสะท้อนสถานะการแจ้งเตือนแบบเลื่อนได้อย่างถูกต้องผ่าน API มาตรฐานเช่น NotificationListenerService.getSnoozedNotifications()
  • [C-2-2] จะต้องทำให้ผู้ใช้จ่ายนี้พร้อมใช้งานเพื่อการแจ้งเตือนแบบเลื่อนจากแอพของบุคคลที่สามที่ติดตั้งแต่ละครั้งเว้นแต่จะมาจากบริการถาวร/เบื้องหน้า
3.8.3.3 DND (ห้ามรบกวน)

หากการใช้งานอุปกรณ์รองรับคุณสมบัติ DND พวกเขา:

  • [C-1-1] MUST implement an activity that would respond to the intent ACTION_NOTIFICATION_POLICY_ACCESS_SETTINGS , which for implementations with UI_MODE_TYPE_NORMAL it MUST be an activity where the user can grant or deny the app access to DND policy configurations.
  • [C-1-2] MUST, for when the device implementation has provided a means for the user to grant or deny third-party apps to access the DND policy configuration, display Automatic DND rules created by applications alongside the user-created and pre-defined rules.
  • [C-1-3] MUST honor the suppressedVisualEffects values passed along the NotificationManager.Policy and if an app has set any of the SUPPRESSED_EFFECT_SCREEN_OFF or SUPPRESSED_EFFECT_SCREEN_ON flags, it SHOULD indicate to the user that the visual effects are suppressed in the DND settings menu.

Android มี API ที่ช่วยให้นักพัฒนาสามารถ รวมการค้นหา เข้ากับแอปพลิเคชันของตน และเปิดเผยข้อมูลแอปพลิเคชันของตนในการค้นหาระบบทั่วโลก โดยทั่วไป ฟังก์ชันนี้ประกอบด้วยอินเทอร์เฟซผู้ใช้ทั้งระบบเดียวที่ช่วยให้ผู้ใช้สามารถป้อนคำสั่ง แสดงคำแนะนำในขณะที่ผู้ใช้พิมพ์ และแสดงผลลัพธ์ Android API ช่วยให้นักพัฒนาสามารถใช้อินเทอร์เฟซนี้ซ้ำเพื่อให้บริการการค้นหาภายในแอปของตนเอง และช่วยให้นักพัฒนาสามารถจัดหาผลลัพธ์ให้กับอินเทอร์เฟซผู้ใช้การค้นหาทั่วโลกทั่วไป

  • การใช้งานอุปกรณ์ Android ควรรวมถึงการค้นหาทั่วโลก ซึ่งเป็นอินเทอร์เฟซผู้ใช้การค้นหาทั่วทั้งระบบแบบเดี่ยวที่ใช้ร่วมกันที่สามารถให้คำแนะนำแบบเรียลไทม์เพื่อตอบสนองต่อการป้อนข้อมูลของผู้ใช้

If device implementations implement the global search interface, they:

  • [C-1-1] MUST implement the APIs that allow third-party applications to add suggestions to the search box when it is run in global search mode.

If no third-party applications are installed that make use of the global search:

  • The default behavior SHOULD be to display web search engine results and suggestions.

Android ยังมี Assist API เพื่อให้แอปพลิเคชันสามารถเลือกจำนวนข้อมูลของบริบทปัจจุบันที่จะแชร์กับผู้ช่วยบนอุปกรณ์ได้

If device implementations support the Assist action, they:

  • [C-2-1] MUST indicate clearly to the end user when the context is shared, by either:
    • Each time the assist app accesses the context, displaying a white light around the edges of the screen that meet or exceed the duration and brightness of the Android Open Source Project implementation.
    • For the preinstalled assist app, providing a user affordance less than two navigations away from the default voice input and assistant app settings menu , and only sharing the context when the assist app is explicitly invoked by the user through a hotword or assist navigation key input.
  • [C-2-2] The designated interaction to launch the assist app as described in section 7.2.3 MUST launch the user-selected assist app, in other words the app that implements VoiceInteractionService , or an activity handling the ACTION_ASSIST intent.

3.8.5. Alerts and Toasts

Applications can use the Toast API to display short non-modal strings to the end user that disappear after a brief period of time, and use the TYPE_APPLICATION_OVERLAY window type API to display alert windows as an overlay over other apps.

If device implementations include a screen or video output, they:

  • [C-1-1] MUST provide a user affordance to block an app from displaying alert windows that use the TYPE_APPLICATION_OVERLAY . The AOSP implementation meets this requirement by having controls in the notification shade.

  • [C-1-2] MUST honor the Toast API and display Toasts from applications to end users in some highly visible manner.

3.8.6. ธีมส์

Android จัดเตรียม "ธีม" ให้เป็นกลไกสำหรับแอปพลิเคชันเพื่อใช้สไตล์กับกิจกรรมหรือแอปพลิเคชันทั้งหมด

Android includes a “Holo” and "Material" theme family as a set of defined styles for application developers to use if they want to match the Holo theme look and feel as defined by the Android SDK.

If device implementations include a screen or video output, they:

  • [C-1-1] MUST NOT alter any of the Holo theme attributes exposed to applications.
  • [C-1-2] MUST support the “Material” theme family and MUST NOT alter any of the Material theme attributes or their assets exposed to applications.

Android ยังรวมกลุ่มธีม "ค่าเริ่มต้นของอุปกรณ์" ไว้เป็นชุดรูปแบบที่กำหนดไว้เพื่อให้นักพัฒนาแอปพลิเคชันใช้หากต้องการจับคู่รูปลักษณ์ของธีมอุปกรณ์ตามที่กำหนดโดยผู้ใช้อุปกรณ์

Android รองรับธีมรูปแบบต่างๆ ที่มีแถบระบบโปร่งแสง ซึ่งช่วยให้นักพัฒนาแอปพลิเคชันสามารถเติมเนื้อหาแอปในพื้นที่ด้านหลังสถานะและแถบนำทางได้ เพื่อให้นักพัฒนาได้รับประสบการณ์ที่สอดคล้องกันในการกำหนดค่านี้ สิ่งสำคัญคือต้องรักษารูปแบบไอคอนแถบสถานะในการใช้งานอุปกรณ์ต่างๆ

If device implementations include a system status bar, they:

  • [C-2-1] MUST use white for system status icons (such as signal strength and battery level) and notifications issued by the system, unless the icon is indicating a problematic status or an app requests a light status bar using the SYSTEM_UI_FLAG_LIGHT_STATUS_BAR flag .
  • [C-2-2] Android device implementations MUST change the color of the system status icons to black (for details, refer to R.style ) when an app requests a light status bar.

3.8.7. วอลเปเปอร์สด

Android กำหนดประเภทส่วนประกอบและ API และวงจรการใช้งานที่เกี่ยวข้องซึ่งอนุญาตให้แอปพลิเคชันเปิดเผย "วอลเปเปอร์สด" แก่ผู้ใช้ปลายทาง วอลเปเปอร์เคลื่อนไหวคือภาพเคลื่อนไหว รูปแบบ หรือรูปภาพที่คล้ายกันซึ่งมีความสามารถในการป้อนข้อมูลที่จำกัดซึ่งแสดงเป็นวอลเปเปอร์เบื้องหลังแอปพลิเคชันอื่นๆ

ฮาร์ดแวร์ถือว่าสามารถใช้งานวอลเปเปอร์เคลื่อนไหวได้อย่างน่าเชื่อถือ หากสามารถเรียกใช้วอลเปเปอร์เคลื่อนไหวทั้งหมดได้ โดยไม่มีข้อจำกัดด้านฟังก์ชันการทำงาน ที่อัตราเฟรมที่สมเหตุสมผล โดยไม่มีผลเสียต่อแอปพลิเคชันอื่นๆ หากข้อจำกัดในฮาร์ดแวร์ทำให้วอลเปเปอร์และ/หรือแอปพลิเคชันขัดข้อง ทำงานผิดปกติ ใช้พลังงาน CPU หรือแบตเตอรี่มากเกินไป หรือทำงานที่อัตราเฟรมต่ำจนไม่อาจยอมรับได้ ฮาร์ดแวร์ดังกล่าวจะถือว่าไม่สามารถเรียกใช้วอลเปเปอร์สดได้ ตัวอย่างเช่น วอลล์เปเปอร์เคลื่อนไหวบางรายการอาจใช้บริบท OpenGL 2.0 หรือ 3.x ในการแสดงเนื้อหา วอลเปเปอร์เคลื่อนไหวจะไม่ทำงานได้อย่างน่าเชื่อถือบนฮาร์ดแวร์ที่ไม่รองรับบริบท OpenGL หลายบริบท เนื่องจากการใช้วอลเปเปอร์เคลื่อนไหวของบริบท OpenGL อาจขัดแย้งกับแอปพลิเคชันอื่นที่ใช้บริบท OpenGL เช่นกัน

  • Device implementations capable of running live wallpapers reliably as described above SHOULD implement live wallpapers.

If device implementations implement live wallpapers, they:

  • [C-1-1] MUST report the platform feature flag android.software.live_wallpaper.

3.8.8. การสลับกิจกรรม

ซอร์สโค้ด Android อัปสตรีมประกอบด้วย หน้าจอภาพรวม ซึ่งเป็นอินเทอร์เฟซผู้ใช้ระดับระบบสำหรับการสลับงานและการแสดงกิจกรรมและงานที่เพิ่งเข้าถึงโดยใช้ภาพขนาดย่อของสถานะกราฟิกของแอปพลิเคชันในขณะที่ผู้ใช้ออกจากแอปพลิเคชันครั้งล่าสุด

Device implementations including the recents function navigation key as detailed in section 7.2.3 MAY alter the interface.

หากการใช้งานอุปกรณ์รวมถึงปุ่มนำทางฟังก์ชันล่าสุดตามรายละเอียดใน ส่วน 7.2.3 เปลี่ยนแปลงอินเทอร์เฟซ พวกเขา:

  • [C-1-1] MUST support at least up to 7 displayed activities.
  • อย่างน้อยควรแสดงชื่อกิจกรรม 4 กิจกรรมพร้อมกัน
  • [C-1-2] MUST implement the screen pinning behavior and provide the user with a settings menu to toggle the feature.
  • ควรแสดงสีไฮไลต์ ไอคอน ชื่อหน้าจอในช่วงล่าสุด
  • ควรแสดงการจ่ายปิด ("x") แต่อาจเลื่อนออกไปจนกว่าผู้ใช้จะโต้ตอบกับหน้าจอ
  • SHOULD implement a shortcut to switch easily to the previous activity.
  • ควรทริกเกอร์การดำเนินการสลับอย่างรวดเร็วระหว่างสองแอปที่ใช้งานล่าสุด เมื่อแตะปุ่มฟังก์ชันล่าสุดสองครั้ง
  • ควรทริกเกอร์โหมดหลายหน้าต่างแบบแยกหน้าจอ หากรองรับ เมื่อกดปุ่มฟังก์ชันล่าสุดค้างไว้
  • อาจแสดงข้อมูลล่าสุดในเครือเป็นกลุ่มที่เคลื่อนไหวร่วมกัน
  • [SR] Are STRONGLY RECOMMENDED to use the upstream Android user interface (or a similar thumbnail-based interface) for the overview screen.

3.8.9. การจัดการอินพุต

Android มีการสนับสนุน การจัดการอินพุต และการสนับสนุนสำหรับเครื่องมือแก้ไขวิธีการป้อนข้อมูลของบริษัทอื่น

If device implementations allow users to use third-party input methods on the device, they:

  • [C-1-1] MUST declare the platform feature android.software.input_methods and support IME APIs as defined in the Android SDK documentation.
  • [C-1-2] MUST provide a user-accessible mechanism to add and configure third-party input methods in response to the android.settings.INPUT_METHOD_SETTINGS intent.

If device implementations declare the android.software.autofill feature flag, they:

3.8.10. ล็อคการควบคุมสื่อบนหน้าจอ

Remote Control Client API เลิกใช้งานแล้วจาก Android 5.0 และใช้ เทมเพลตการแจ้งเตือนสื่อ ที่ช่วยให้แอปพลิเคชันสื่อทำงานร่วมกับการควบคุมการเล่นที่แสดงบนหน้าจอล็อคได้

3.8.11. โปรแกรมรักษาหน้าจอ (ก่อนหน้านี้คือ Dreams)

Android รองรับ สกรีนเซฟเวอร์แบบโต้ตอบ ซึ่งก่อนหน้านี้เรียกว่า Dreams โปรแกรมรักษาหน้าจออนุญาตให้ผู้ใช้โต้ตอบกับแอปพลิเคชันเมื่ออุปกรณ์ที่เชื่อมต่อกับแหล่งพลังงานไม่ได้ใช้งานหรือเชื่อมต่ออยู่ในแท่นวางบนโต๊ะ Android Watch devices MAY implement screen savers, but other types of device implementations SHOULD include support for screen savers and provide a settings option for users to configure screen savers in response to the android.settings.DREAM_SETTINGS intent.

3.8.12. ที่ตั้ง

If device implementations include a hardware sensor (eg GPS) that is capable of providing the location coordinates, they

3.8.13. ยูนิโค้ดและฟอนต์

Android includes support for the emoji characters defined in Unicode 10.0 .

If device implementations include a screen or video output, they:

  • [C-1-1] MUST be capable of rendering these emoji characters in color glyph.
  • [C-1-2] MUST include support for:
    • Roboto 2 font with different weights—sans-serif-thin, sans-serif-light, sans-serif-medium, sans-serif-black, sans-serif-condensed, sans-serif-condensed-light for the languages available on the อุปกรณ์.
    • Full Unicode 7.0 coverage of Latin, Greek, and Cyrillic, including the Latin Extended A, B, C, and D ranges, and all glyphs in the currency symbols block of Unicode 7.0.
  • SHOULD support the skin tone and diverse family emojis as specified in the Unicode Technical Report #51 .

If device implementations include an IME, they:

  • SHOULD provide an input method to the user for these emoji characters.

3.8.14. หลายหน้าต่าง

If device implementations have the capability to display multiple activities at the same time, they:

  • [C-1-1] ต้องใช้โหมดหลายหน้าต่างดังกล่าวตามพฤติกรรมของแอปพลิเคชันและ API ที่อธิบายไว้ใน เอกสารสนับสนุนโหมดหลายหน้าต่างของ Android SDK และตรงตามข้อกำหนดต่อไปนี้:
  • [C-1-2] Applications can indicate whether they are capable of operating in multi-window mode in the AndroidManifest.xml file, either explicitly via setting the android:resizeableActivity attribute to true or implicitly by having the targetSdkVersion > 24. Apps that explicitly set this attribute to false in their manifest MUST NOT be launched in multi-window mode. Older apps with targetSdkVersion < 24 that did not set this android:resizeableActivity attribute MAY be launched in multi-window mode, but the system MUST provide warning that the app may not work as expected in multi-window mode.
  • [C-1-3] MUST NOT offer split-screen or freeform mode if the screen height < 440 dp and the screen width < 440 dp.
  • การใช้งานอุปกรณ์ที่มีขนาดหน้าจอ xlarge ควรรองรับโหมดอิสระ

If device implementations support multi-window mode(s), and the split screen mode, they:

  • [C-2-1] MUST preload a resizeable launcher as the default.
  • [C-2-2] ต้องครอบตัดกิจกรรมที่เชื่อมต่อไว้ของหลายหน้าต่างแบบแยกหน้าจอ แต่ควรแสดงเนื้อหาบางส่วน หากแอป Launcher เป็นหน้าต่างที่โฟกัส
  • [C-2-3] MUST honor the declared AndroidManifestLayout_minWidth and AndroidManifestLayout_minHeight values of the third-party launcher application and not override these values in the course of showing some content of the docked activity.

If device implementations support multi-window mode(s) and picture-in-picture multi-window mode, they:

  • [C-3-1] MUST launch activities in picture-in-picture multi-window mode when the app is: * Targeting API level 26 or higher and declares android:supportsPictureInPicture * Targeting API level 25 or lower and declares both android:resizeableActivity and android:supportsPictureInPicture .
  • [C-3-2] MUST expose the actions in their SystemUI as specified by the current PIP activity through the setActions() API.
  • [C-3-3] MUST support aspect ratios greater than or equal to 1:2.39 and less than or equal to 2.39:1, as specified by the PIP activity through the setAspectRatio() API.
  • [C-3-4] MUST use KeyEvent.KEYCODE_WINDOW to control the PIP window; if PIP mode is not implemented, the key MUST be available to the foreground activity.
  • [C-3-5] MUST provide a user affordance to block an app from displaying in PIP mode; the AOSP implementation meets this requirement by having controls in the notification shade.
  • [C-3-6] MUST allocate minimum width and height of 108 dp for the PIP window and minimum width of 240 dp and height of 135 dp for the PIP window when the Configuration.uiMode is configured as UI_MODE_TYPE_TELEVISION .

3.8.15. Display Cutout

Android supports a Display Cutout as described in the SDK document. The DisplayCutout API defines an area on the edge of the display that is not functional for displaying content.

If device implementations include display cutout(s), they:

  • [C-1-1] MUST only have cutout(s) on the short edge(s) of the device. Conversely, if the device's aspect ratio is 1.0(1:1), they MUST NOT have cutout(s).
  • [C-1-2] MUST NOT have more than one cutout per edge.
  • [C-1-3] MUST honor the display cutout flags set by the app through the WindowManager.LayoutParams API as described in the SDK.
  • [C-1-4] MUST report correct values for all cutout metrics defined in the DisplayCutout API.

3.9. การดูแลระบบอุปกรณ์

Android includes features that allow security-aware applications to perform device administration functions at the system level, such as enforcing password policies or performing remote wipe, through the Android Device Administration API .

If device implementations implement the full range of device administration policies defined in the Android SDK documentation, they:

  • [C-1-1] MUST declare android.software.device_admin .
  • [C-1-2] MUST support device owner provisioning as described in section 3.9.1 and section 3.9.1.1 .

3.9.1 การจัดเตรียมอุปกรณ์

3.9.1.1 การจัดสรรเจ้าของอุปกรณ์

If device implementations declare android.software.device_admin , they:

  • [C-1-1] MUST support enrolling a Device Policy Client (DPC) as a Device Owner app as described below:
  • [C-1-2] MUST require some affirmative action during the provisioning process to consent to the app being set as Device Owner. Consent can be via user action or by some programmatic means during provisioning but it MUST NOT be hard coded or prevent the use of other Device Owner apps.

If device implementations declare android.software.device_admin , but also include a proprietary Device Owner management solution and provide a mechanism to promote an application configured in their solution as a "Device Owner equivalent" to the standard "Device Owner" as recognized by the standard Android DevicePolicyManager APIs, they:

  • [C-2-1] MUST have a process in place to verify that the specific app being promoted belongs to a legitimate enterprise device management solution and it has been already configured in the proprietary solution to have the rights equivalent as a "Device Owner" .
  • [C-2-2] MUST show the same AOSP Device Owner consent disclosure as the flow initiated by android.app.action.PROVISION_MANAGED_DEVICE prior to enrolling the DPC application as "Device Owner".
  • MAY have user data on the device prior to enrolling the DPC application as "Device Owner".
3.9.1.2 การจัดเตรียมโปรไฟล์ที่ได้รับการจัดการ

If device implementations declare android.software.managed_users , they:

  • [C-1-1] MUST implement the APIs allowing a Device Policy Controller (DPC) application to become the owner of a new Managed Profile .

  • [C-1-2] The managed profile provisioning process (the flow initiated by android.app.action.PROVISION_MANAGED_PROFILE ) users experience MUST align with the AOSP implementation.

  • [C-1-3] MUST provide the following user affordances within the Settings to indicate to the user when a particular system function has been disabled by the Device Policy Controller (DPC):

    • ไอคอนที่สอดคล้องกันหรือความสะดวกของผู้ใช้อื่นๆ (เช่น ไอคอนข้อมูล AOSP อัปสตรีม) เพื่อแสดงเมื่อการตั้งค่าเฉพาะถูกจำกัดโดยผู้ดูแลอุปกรณ์
    • ข้อความอธิบายสั้นๆ ตามที่ผู้ดูแลระบบอุปกรณ์ระบุไว้ผ่าน setShortSupportMessage
    • ไอคอนของแอปพลิเคชัน DPC

3.9.2 การสนับสนุนโปรไฟล์ที่ได้รับการจัดการ

If device implementations declare android.software.managed_users , they:

  • [C-1-1] MUST support managed profiles via the android.app.admin.DevicePolicyManager APIs.
  • [C-1-2] MUST allow one and only one managed profile to be created .
  • [C-1-3] MUST use an icon badge (similar to the AOSP upstream work badge) to represent the managed applications and widgets and other badged UI elements like Recents & Notifications.
  • [C-1-4] MUST display a notification icon (similar to the AOSP upstream work badge) to indicate when user is within a managed profile application.
  • [C-1-5] MUST display a toast indicating that the user is in the managed profile if and when the device wakes up (ACTION_USER_PRESENT) and the foreground application is within the managed profile.
  • [C-1-6] Where a managed profile exists, MUST show a visual affordance in the Intent 'Chooser' to allow the user to forward the intent from the managed profile to the primary user or vice versa, if enabled by the Device Policy คอนโทรลเลอร์
  • [C-1-7] Where a managed profile exists, MUST expose the following user affordances for both the primary user and the managed profile:
    • แยกบัญชีสำหรับแบตเตอรี่สถานที่ข้อมูลมือถือและการใช้งานที่เก็บข้อมูลสำหรับผู้ใช้หลักและโปรไฟล์ที่ได้รับการจัดการ
    • การจัดการอิสระของแอปพลิเคชัน VPN ที่ติดตั้งภายในผู้ใช้หลักหรือโปรไฟล์ที่มีการจัดการ
    • การจัดการแอปพลิเคชันอิสระที่ติดตั้งภายในผู้ใช้หลักหรือโปรไฟล์ที่ได้รับการจัดการ
    • การจัดการบัญชีอิสระภายในผู้ใช้หลักหรือโปรไฟล์ที่ได้รับการจัดการ
  • [C-1-8] MUST ensure the preinstalled dialer, contacts and messaging applications can search for and look up caller information from the managed profile (if one exists) alongside those from the primary profile, if the Device Policy Controller permits it.
  • [C-1-9] MUST ensure that it satisfies all the security requirements applicable for a device with multiple users enabled (see section 9.5 ), even though the managed profile is not counted as another user in addition to the primary user.
  • [C-1-10] MUST support the ability to specify a separate lock screen meeting the following requirements to grant access to apps running in a managed profile.
    • การใช้งานอุปกรณ์จะต้องเป็นเกียรติแก่ DevicePolicyManager.ACTION_SET_NEW_PASSWORD Intent และแสดงอินเทอร์เฟซเพื่อกำหนดค่าข้อมูลรับรองหน้าจอล็อคแยกต่างหากสำหรับโปรไฟล์ที่มีการจัดการ
    • The lock screen credentials of the managed profile MUST use the same credential storage and management mechanisms as the parent profile, as documented on the Android Open Source Project Site .
    • นโยบายรหัสผ่าน DPC จะต้องใช้กับข้อมูลรับรองหน้าจอล็อคของโปรไฟล์ที่ได้รับการจัดการเท่านั้นเว้นแต่จะเรียกร้องให้อินสแตนซ์ของ DevicePolicyManager ส่งคืนโดย GetParentProfileInstance
  • เมื่อผู้ติดต่อจากโปรไฟล์ที่มีการจัดการจะปรากฏขึ้นในบันทึกการโทรที่ติดตั้งไว้ล่วงหน้า UI ในการโทรติดต่อการแจ้งเตือนและไม่ได้รับการโทรติดต่อผู้ติดต่อและแอพส่งข้อความที่พวกเขาควรได้รับตราด้วยป้ายเดียวกับที่ใช้เพื่อระบุแอปพลิเคชันโปรไฟล์ที่มีการจัดการ

3.9.3 Managed User Support

If device implementations declare android.software.managed_users , they:

  • [C-1-1] MUST provide a user affordance to logout from the current user and switch back to the primary user in multiple-user session when isLogoutEnabled returns true . The user affordance MUST be accessible from the lockscreen without unlocking the device.

3.10. การเข้าถึง

Android ให้เลเยอร์การเข้าถึงที่ช่วยให้ผู้ใช้พิการในการนำทางอุปกรณ์ของพวกเขาได้ง่ายขึ้น นอกจากนี้ Android ยังให้ API แพลตฟอร์มที่เปิดใช้งานการใช้บริการการเข้าถึงเพื่อรับการเรียกกลับสำหรับเหตุการณ์ผู้ใช้และระบบและสร้างกลไกการตอบรับทางเลือกเช่นข้อความเป็นคำพูดการพูดคำติชมแบบสัมผัสและการนำทางแทร็กบอล/D-Pad

If device implementations support third-party accessibility services, they:

  • [C-1-1] MUST provide an implementation of the Android accessibility framework as described in the accessibility APIs SDK documentation.
  • [C-1-2] MUST generate accessibility events and deliver the appropriate AccessibilityEvent to all registered AccessibilityService implementations as documented in the SDK.
  • [C-1-3] MUST honor the android.settings.ACCESSIBILITY_SETTINGS intent to provide a user-accessible mechanism to enable and disable the third-party accessibility services alongside the preinstalled accessibility services.
  • [C-1-4] MUST add a button in the system's navigation bar allowing the user to control the accessibility service when the enabled accessibility services declare the AccessibilityServiceInfo.FLAG_REQUEST_ACCESSIBILITY_BUTTON . Note that for device implementations with no system navigation bar, this requirement is not applicable, but device implementations SHOULD provide a user affordance to control these accessibility services.

If device implementations include preinstalled accessibility services, they:

  • [C-2-1] MUST implement these preinstalled accessibility services as Direct Boot Aware apps when the data storage is encrypted with File Based Encryption (FBE).
  • SHOULD provide a mechanism in the out-of-box setup flow for users to enable relevant accessibility services, as well as options to adjust the font size, display size and magnification gestures.

3.11. ข้อความเป็นคำพูด

Android รวมถึง APIs ที่อนุญาตให้แอปพลิเคชันใช้ประโยชน์จากบริการ Text-to-Speech (TTS) และอนุญาตให้ผู้ให้บริการสามารถให้บริการ TTS ได้

If device implementations reporting the feature android.hardware.audio.output, they:

If device implementations support installation of third-party TTS engines, they:

  • [C-2-1] MUST provide user affordance to allow the user to select a TTS engine for use at system level.

3.12. กรอบอินพุตทีวี

Framework Input Android Television Framework (TIF) ช่วยลดความซับซ้อนของการส่งมอบเนื้อหาสดไปยังอุปกรณ์โทรทัศน์ Android TIF จัดเตรียม API มาตรฐานเพื่อสร้างโมดูลอินพุตที่ควบคุมอุปกรณ์โทรทัศน์ Android

If device implementations support TIF, they:

  • [C-1-1] MUST declare the platform feature android.software.live_tv .
  • [C-1-2] MUST support all TIF APIs such that an application which uses these APIs and the third-party TIF-based inputs service can be installed and used on the device.

3.13. การตั้งค่าด่วน

Android provides a Quick Settings UI component that allows quick access to frequently used or urgently needed actions.

If device implementations include a Quick Settings UI component, they:

  • [C-1-1] MUST allow the user to add or remove the tiles provided through the quicksettings APIs from a third-party app.
  • [C-1-2] MUST NOT automatically add a tile from a third-party app directly to the Quick Settings.
  • [C-1-3] MUST display all the user-added tiles from third-party apps alongside the system-provided quick setting tiles.

3.14. Media UI

If device implementations include the UI framework that supports third-party apps that depend on MediaBrowser and MediaSession , they:

3.15. แอพทันใจ

Device implementations MUST satisfy the following requirements:

  • [C-0-1] Instant Apps MUST only be granted permissions that have the android:protectionLevel set to "instant" .
  • [C-0-2] Instant Apps MUST NOT interact with installed apps via implicit intents unless one of the following is true:
    • The component's intent pattern filter is exposed and has CATEGORY_BROWSABLE
    • The action is one of ACTION_SEND, ACTION_SENDTO, ACTION_SEND_MULTIPLE
    • The target is explicitly exposed with android:visibleToInstantApps
  • [C-0-3] Instant Apps MUST NOT interact explicitly with installed apps unless the component is exposed via android:visibleToInstantApps.
  • [C-0-4] IInstalled Apps MUST NOT see details about Instant Apps on the device unless the Instant App explicitly connects to the installed application.

3.16. การจับคู่อุปกรณ์คู่หู

Android includes support for companion device pairing to more effectively manage association with companion devices and provides the CompanionDeviceManager API for apps to access this feature.

If device implementations support the companion device pairing feature, they:

  • [C-1-1] MUST declare the feature flag FEATURE_COMPANION_DEVICE_SETUP .
  • [C-1-2] MUST ensure the APIs in the android.companion package is fully implemented.
  • [C-1-3] MUST provide user affordances for the user to select/confirm a companion device is present and operational.

3.17. Heavyweight Apps

If device implementations declare the feature FEATURE_CANT_SAVE_STATE , then they:

  • [C-1-1] MUST have only one installed app that specifies cantSaveState running in the system at a time. If the user leaves such an app without explicitly exiting it (for example by pressing home while leaving an active activity the system, instead of pressing back with no remaining active activities in the system), then device implementations MUST prioritize that app in RAM as they do for other things that are expected to remain running, such as foreground services. While such an app is in the background, the system can still apply power management features to it, such as limiting CPU and network access.
  • [C-1-2] MUST provide a UI affordance to chose the app that won't participate in the normal state save/restore mechanism once the user launches a second app declared with cantSaveState attribute.
  • [C-1-3] MUST NOT apply other changes in policy to apps that specify cantSaveState , such as changing CPU performance or changing scheduling prioritization.

If device implementations don't declare the feature FEATURE_CANT_SAVE_STATE , then they:

  • [C-1-1] MUST ignore the cantSaveState attribute set by apps and MUST NOT change the app behavior based on that attribute.

4. ความเข้ากันได้ของบรรจุภัณฑ์ของแอปพลิเคชัน

Devices implementations:

  • [C-0-1] MUST be capable of installing and running Android “.apk” files as generated by the “aapt” tool included in the official Android SDK .
  • As the above requirement may be challenging, device implementations are RECOMMENDED to use the AOSP reference implementation's package management system.

การใช้งานอุปกรณ์:

  • [C-0-2] MUST support verifying “.apk” files using the APK Signature Scheme v3 , APK Signature Scheme v2 and JAR signing .
  • [C-0-3] MUST NOT extend either the .apk , Android Manifest , Dalvik bytecode , or RenderScript bytecode formats in such a way that would prevent those files from installing and running correctly on other compatible devices.
  • [C-0-4] MUST NOT allow apps other than the current "installer of record" for the package to silently uninstall the app without any user confirmation, as documented in the SDK for the DELETE_PACKAGE permission. ข้อยกเว้นเพียงอย่างเดียวคือการจัดการแอพแพคเกจแพ็คเกจการจัดการ แพ็คเกจ _Needs_Verification Intent และการจัดการแอป Storage Manager Action_Manage_Storage

  • [C-0-5] MUST have an activity that handles the android.settings.MANAGE_UNKNOWN_APP_SOURCES intent.

  • [C-0-6] MUST NOT install application packages from unknown sources, unless the app that requests the installation meets all the following requirements:

    • It MUST declare the REQUEST_INSTALL_PACKAGES permission or have the android:targetSdkVersion set at 24 or lower.
    • ต้องได้รับอนุญาตจากผู้ใช้ในการติดตั้งแอพจากแหล่งที่ไม่รู้จัก
  • SHOULD provide a user affordance to grant/revoke the permission to install apps from unknown sources per application, but MAY choose to implement this as a no-op and return RESULT_CANCELED for startActivityForResult() , if the device implementation does not want to allow users to have this choice. However, even in such cases, they SHOULD indicate to the user why there is no such choice presented.

  • [C-0-7] MUST display a warning dialog with the warning string that is provided through the system API PackageManager.setHarmfulAppWarning to the user before launching an activity in an application that has been marked by the same system API PackageManager.setHarmfulAppWarning as potentially เป็นอันตราย.

  • SHOULD provide a user affordance to choose to uninstall or launch an application on the warning dialog.

5. ความเข้ากันได้ของมัลติมีเดีย

การใช้งานอุปกรณ์:

  • [C-0-1] MUST support the media formats, encoders, decoders, file types, and container formats defined in section 5.1 for each and every codec declared by MediaCodecList .
  • [C-0-2] MUST declare and report support of the encoders, decoders available to third-party applications via MediaCodecList .
  • [C-0-3] MUST be able to decode and make available to third-party apps all the formats it can encode. This includes all bitstreams that its encoders generate and the profiles reported in its CamcorderProfile .

การใช้งานอุปกรณ์:

  • SHOULD aim for minimum codec latency, in others words, they
    • ไม่ควรบริโภคและจัดเก็บบัฟเฟอร์อินพุตและส่งคืนบัฟเฟอร์อินพุตเมื่อประมวลผลแล้วเท่านั้น
    • ไม่ควรยึดบัฟเฟอร์ที่ถอดรหัสไว้นานกว่าที่กำหนดโดยมาตรฐาน (เช่น SPS)
    • ไม่ควรยึดติดกับบัฟเฟอร์ที่เข้ารหัสเกินกว่าที่กำหนดโดยโครงสร้าง GOP

ตัวแปลงสัญญาณทั้งหมดที่แสดงไว้ในส่วนด้านล่างมีไว้เป็นการใช้งานซอฟต์แวร์ในการใช้งาน Android ที่ต้องการจากโครงการ Android Open Source

โปรดทราบว่าทั้ง Google และ Open Handset Alliance ไม่ได้เป็นตัวแทนใด ๆ ที่ตัวแปลงสัญญาณเหล่านี้ปราศจากสิทธิบัตรของบุคคลที่สาม ผู้ที่ตั้งใจจะใช้ซอร์สโค้ดนี้ในฮาร์ดแวร์หรือผลิตภัณฑ์ซอฟต์แวร์ได้รับการแนะนำว่าการใช้งานรหัสนี้รวมถึงในซอฟต์แวร์โอเพ่นซอร์สหรือ Shareware อาจต้องใช้ใบอนุญาตสิทธิบัตรจากผู้ถือสิทธิบัตรที่เกี่ยวข้อง

5.1. ตัวแปลงสัญญาณมีเดีย

5.1.1. การเข้ารหัสเสียง

ดูรายละเอียดเพิ่มเติมใน 5.1.3 Audio Codecs Details .

If device implementations declare android.hardware.microphone , they MUST support the following audio encoding:

  • [C-1-1] พีซีเอ็ม/เวฟ

5.1.2. การถอดรหัสเสียง

ดูรายละเอียดเพิ่มเติมใน 5.1.3 Audio Codecs Details .

If device implementations declare support for the android.hardware.audio.output feature, they must support decoding the following audio formats:

  • [C-1-1] MPEG-4 AAC Profile (AAC LC)
  • [C-1-2] โปรไฟล์ MPEG-4 HE AAC (AAC+)
  • [C-1-3] MPEG-4 HE AACv2 Profile (enhanced AAC+)
  • [C-1-4] AAC ELD (enhanced low delay AAC)
  • [C-1-11] xHE-AAC (ISO/IEC 23003-3 Extended HE AAC Profile, which includes the USAC Baseline Profile, and ISO/IEC 23003-4 Dynamic Range Control Profile)
  • [C-1-5] FLAC
  • [C-1-6] MP3
  • [C-1-7] MIDI
  • [C-1-8] วอร์บิส
  • [C-1-9] PCM/WAVE
  • [C-1-10] บทประพันธ์

If device implementations support the decoding of AAC input buffers of multichannel streams (ie more than two channels) to PCM through the default AAC audio decoder in the android.media.MediaCodec API, the following MUST be supported:

  • [C-2-1] Decoding MUST be performed without downmixing (eg a 5.0 AAC stream must be decoded to five channels of PCM, a 5.1 AAC stream must be decoded to six channels of PCM).
  • [C-2-2] Dynamic range metadata MUST be as defined in "Dynamic Range Control (DRC)" in ISO/IEC 14496-3, and the android.media.MediaFormat DRC keys to configure the dynamic range-related behaviors of the audio decoder. The AAC DRC keys were introduced in API 21,and are: KEY_AAC_DRC_ATTENUATION_FACTOR , KEY_AAC_DRC_BOOST_FACTOR , KEY_AAC_DRC_HEAVY_COMPRESSION , KEY_AAC_DRC_TARGET_REFERENCE_LEVEL and KEY_AAC_ENCODED_TARGET_LEVEL .

When decoding USAC audio, MPEG-D (ISO/IEC 23003-4):

  • [C-3-1] Loudness and DRC metadata MUST be interpreted and applied according to MPEG-D DRC Dynamic Range Control Profile Level 1.
  • [C-3-2] The decoder MUST behave according to the configuration set with the following android.media.MediaFormat keys: KEY_AAC_DRC_TARGET_REFERENCE_LEVEL and KEY_AAC_DRC_EFFECT_TYPE .

MPEG-4 AAC, HE AAC, and HE AACv2 profile decoders:

  • MAY support loudness and dynamic range control using ISO/IEC 23003-4 Dynamic Range Control Profile.

If ISO/IEC 23003-4 is supported and if both ISO/IEC 23003-4 and ISO/IEC 14496-3 metadata are present in a decoded bitstream, then:

  • ISO/IEC 23003-4 metadata SHALL take precedence.

5.1.3. รายละเอียดตัวแปลงสัญญาณเสียง

รูปแบบ/ตัวแปลงสัญญาณ รายละเอียด ประเภทไฟล์/รูปแบบคอนเทนเนอร์ที่รองรับ
โปรไฟล์ MPEG-4 AAC
(AAC LC)
Support for mono/stereo/5.0/5.1 content with standard sampling rates from 8 to 48 kHz.
  • 3GPP (.3gp)
  • MPEG-4 (.MP4, .M4A)
  • ADTS raw AAC (.aac, ADIF not supported)
  • MPEG-TS (.ts, not seekable)
MPEG-4 เขาโปรไฟล์ AAC (AAC+) Support for mono/stereo/5.0/5.1 content with standard sampling rates from 16 to 48 kHz.
mpeg-4 เขา aacv2
โปรไฟล์ (ปรับปรุง AAC+)
Support for mono/stereo/5.0/5.1 content with standard sampling rates from 16 to 48 kHz.
AAC eld (เพิ่มความล่าช้าต่ำ AAC) รองรับเนื้อหาโมโน/สเตอริโอด้วยอัตราการสุ่มตัวอย่างมาตรฐานจาก 16 ถึง 48 kHz
ยูเอสเอซี Support for mono/stereo content with standard sampling rates from 7.35 to 48 kHz. MPEG-4 (.MP4, .M4A)
AMR-NB 4.75 ถึง 12.2 kbps ตัวอย่าง @ 8 kHz 3GPP (.3gp)
AMR-WB 9 อัตราจาก 6.60 kbit/s เป็น 23.85 kbit/s ตัวอย่าง @ 16 kHz
แฟลค โมโน/สเตอริโอ (ไม่มีหลายช่อง) อัตราตัวอย่างสูงถึง 48 kHz (แต่แนะนำมากถึง 44.1 kHz บนอุปกรณ์ที่มีเอาท์พุท 44.1 kHz เนื่องจาก 48 ถึง 44.1 kHz downsampler ไม่รวมตัวกรองผ่านต่ำ) แนะนำ 16 บิต ไม่มีการสมัครเป็นเวลา 24 บิต flac (.flac) เท่านั้น
เอ็มพี3 ค่าคงที่ Mono/Stereo 8-320Kbps (CBR) หรือตัวแปรบิตเรต (VBR) mp3 (.mp3)
มิดิ MIDI Type 0 และ 1 DLS เวอร์ชัน 1 และ 2 XMF และ Mobile XMF รองรับรูปแบบเสียงเรียกเข้า rtttl/rtx, ota และ imelody
  • พิมพ์ 0 และ 1 (.mid, .xmf, .mxmf)
  • rtttl/rtx (.rtttl, .rtx)
  • OTA (.OTA)
  • Imelody (.Imy)
วอร์บิส
  • Ogg (.OGG)
  • Matroska (.MKV, Android 4.0+)
PCM/Wave PCM เชิงเส้น 16 บิต (อัตราสูงถึงการ จำกัด ฮาร์ดแวร์) อุปกรณ์จะต้องรองรับอัตราการสุ่มตัวอย่างสำหรับการบันทึก PCM ดิบที่ 8000, 11025, 16000 และ 44100 Hz Wave (.wav)
บทประพันธ์ Matroska (.MKV), OGG (.OGG)

5.1.4. การเข้ารหัสรูปภาพ

See more details in 5.1.6. Image Codecs Details .

Device implementations MUST support encoding the following image encoding:

  • [C-0-1] JPEG
  • [C-0-2] PNG
  • [C-0-3] WebP

5.1.5. การถอดรหัสภาพ

See more details in 5.1.6. Image Codecs Details .

Device implementations MUST support decoding the following image encoding:

  • [C-0-1] JPEG
  • [C-0-2] GIF
  • [C-0-3] PNG
  • [C-0-4] BMP
  • [C-0-5] WebP
  • [C-0-6] Raw
  • [C-0-7] HEIF (HEIC)

5.1.6. รายละเอียดตัวแปลงสัญญาณรูปภาพ

รูปแบบ/ตัวแปลงสัญญาณ รายละเอียด ประเภทไฟล์/รูปแบบคอนเทนเนอร์ที่รองรับ
เจเพ็ก ฐาน+ก้าวหน้า เจเพ็ก (.jpg)
กิฟ gif (.gif)
PNG png (.png)
บีเอ็มพี BMP (.BMP)
เว็บพี webp (.webp)
ดิบ arw (.ARW), cr2 (.cr2), dng (.dng), nef (.nef), nrw (.nrw), orf (.orf), pef (.pef), raf (.raf), rw2 ( .RW2), SRW (.SRW)
HEIF Image, Image collection, Image sequence HEIF (.heif), HEIC (.heic)

5.1.7. ตัวแปลงสัญญาณวิดีโอ

  • For acceptable quality of web video streaming and video-conference services, device implementations SHOULD use a hardware VP8 codec that meets the requirements .

If device implementations include a video decoder or encoder:

  • [C-1-1] Video codecs MUST support output and input bytebuffer sizes that accommodate the largest feasible compressed and uncompressed frame as dictated by the standard and configuration but also not overallocate.

  • [C-1-2] Video encoders and decoders MUST support YUV420 flexible color format (COLOR_FormatYUV420Flexible).

If device implementations advertise HDR profile support through Display.HdrCapabilities , they:

  • [C-2-1] MUST support HDR static metadata parsing and handling.

If device implementations advertise intra refresh support through FEATURE_IntraRefresh in the MediaCodecInfo.CodecCapabilities class, they:

  • [C-3-1] MUST support the refresh periods in the range of 10 - 60 frames and accurately operate within 20% of configured refresh period.

5.1.8. รายการตัวแปลงสัญญาณวิดีโอ

รูปแบบ/ตัวแปลงสัญญาณ รายละเอียด ประเภทไฟล์ที่รองรับ/
รูปแบบคอนเทนเนอร์
H.263
  • 3GPP (.3gp)
  • MPEG-4 (.mp4)
H.264 เอวีซี ดู หัวข้อ 5.2 และ 5.3 สำหรับรายละเอียด
  • 3GPP (.3gp)
  • MPEG-4 (.mp4)
  • MPEG-2 TS (.TS, AAC Audio เท่านั้นไม่สามารถค้นหาได้ Android 3.0+)
H.265 HEVC ดู หัวข้อ 5.3 สำหรับรายละเอียด MPEG-4 (.mp4)
MPEG-2 โปรไฟล์หลัก MPEG2-TS
MPEG-4 SP 3GPP (.3gp)
วีพี8 ดู หัวข้อ 5.2 และ 5.3 สำหรับรายละเอียด
วีพี9 ดู หัวข้อ 5.3 สำหรับรายละเอียด

5.2. การเข้ารหัสวิดีโอ

หากการใช้งานอุปกรณ์รองรับตัวเข้ารหัสวิดีโอและทำให้ใช้ได้กับแอปของบุคคลที่สาม อุปกรณ์เหล่านั้นจะ:

  • SHOULD NOT be, over two sliding windows, more than ~15% over the bitrate between intraframe (I-frame) intervals.
  • SHOULD NOT be more than ~100% over the bitrate over a sliding window of 1 second.

If device implementations include an embedded screen display with the diagonal length of at least 2.5 inches or include a video output port or declare the support of a camera via the android.hardware.camera.any feature flag, they:

  • [C-1-1] MUST include the support of at least one of the VP8 or H.264 video encoders, and make it available for third-party applications.
  • SHOULD support both VP8 and H.264 video encoders, and make it available for third-party applications.

If device implementations support any of the H.264, VP8, VP9 or HEVC video encoders and make it available to third-party applications, they:

  • [C-2-1] MUST support dynamically configurable bitrates.
  • ควรรองรับอัตราเฟรมตัวแปรที่วิดีโอตัวเข้ารหัสควรกำหนดระยะเวลาเฟรมทันทีตามการประทับเวลาของบัฟเฟอร์อินพุตและจัดสรรถังบิตตามระยะเวลาเฟรมนั้น

If device implementations support the MPEG-4 SP video encoder and make it available to third-party apps, they:

  • SHOULD support dynamically configurable bitrates for the supported encoder.

5.2.1. H.263

If device implementations support H.263 encoders and make it available to third-party apps, they:

  • [C-1-1] MUST support Baseline Profile Level 45.
  • SHOULD support dynamically configurable bitrates for the supported encoder.

5.2.2. H-264

If device implementations support H.264 codec, they:

  • [C-1-1] MUST support Baseline Profile Level 3. However, support for ASO (Arbitrary Slice Ordering), FMO (Flexible Macroblock Ordering) and RS (Redundant Slices) is OPTIONAL. ยิ่งไปกว่านั้นเพื่อรักษาความเข้ากันได้กับอุปกรณ์ Android อื่น ๆ ขอแนะนำให้ ASO, FMO และ RS ไม่ได้ใช้สำหรับโปรไฟล์พื้นฐานโดย encoders
  • [C-1-2] MUST support the SD (Standard Definition) video encoding profiles in the following table.
  • ควรรองรับโปรไฟล์หลักระดับ 4
  • ควรรองรับโปรไฟล์การเข้ารหัสวิดีโอ HD (ความละเอียดสูง) ตามที่ระบุไว้ในตารางต่อไปนี้

If device implementations report support of H.264 encoding for 720p or 1080p resolution videos through the media APIs, they:

  • [C-2-1] MUST support the encoding profiles in the following table.
SD (คุณภาพต่ำ) SD (คุณภาพสูง) เอชดี 720p เอชดี 1080p
ความละเอียดวิดีโอ 320 x 240 พิกเซล 720 x 480 px 1280x720 พิกเซล 1920 x 1080 พิกเซล
อัตราเฟรมวิดีโอ 20 เฟรมต่อวินาที 30 เฟรมต่อวินาที 30 เฟรมต่อวินาที 30 เฟรมต่อวินาที
บิตเรตของวิดีโอ 384 กิโลบิตต่อวินาที 2 Mbps 4Mbps 10 Mbps

5.2.3. วีพี8

If device implementations support VP8 codec, they:

  • [C-1-1] MUST support the SD video encoding profiles.
  • SHOULD support the following HD (High Definition) video encoding profiles.
  • SHOULD support writing Matroska WebM files.
  • SHOULD use a hardware VP8 codec that meets the WebM project RTC hardware coding requirements , to ensure acceptable quality of web video streaming and video-conference services.

If device implementations report support of VP8 encoding for 720p or 1080p resolution videos through the media APIs, they:

  • [C-2-1] MUST support the encoding profiles in the following table.
SD (คุณภาพต่ำ) SD (คุณภาพสูง) เอชดี 720p เอชดี 1080p
ความละเอียดวิดีโอ 320 x 180 พิกเซล 640 x 360 พิกเซล 1280x720 พิกเซล 1920 x 1080 พิกเซล
อัตราเฟรมวิดีโอ 30 เฟรมต่อวินาที 30 เฟรมต่อวินาที 30 เฟรมต่อวินาที 30 เฟรมต่อวินาที
บิตเรตของวิดีโอ 800 kbps 2 Mbps 4Mbps 10 Mbps

5.2.4. วีพี9

If device implementations support VP9 codec, they:

  • SHOULD support writing Matroska WebM files.

5.3. การถอดรหัสวิดีโอ

If device implementations support VP8, VP9, H.264, or H.265 codecs, they:

  • [C-1-1] MUST support dynamic video resolution and frame rate switching through the standard Android APIs within the same stream for all VP8, VP9, H.264, and H.265 codecs in real time and up to the maximum resolution supported by each codec on the device.

If device implementations declare support for the Dolby Vision decoder through HDR_TYPE_DOLBY_VISION , they:

  • [C-2-1] MUST provide a Dolby Vision-capable extractor.
  • [C-2-2] MUST properly display Dolby Vision content on the device screen or on a standard video output port (eg, HDMI).
  • [C-2-3] MUST set the track index of backward-compatible base-layer(s) (if present) to be the same as the combined Dolby Vision layer's track index.

5.3.1. MPEG-2

If device implementations support MPEG-2 decoders, they:

  • [C-1-1] MUST support the Main Profile High Level.

5.3.2. H.263

If device implementations support H.263 decoders, they:

  • [C-1-1] MUST support Baseline Profile Level 30 and Level 45.

5.3.3. MPEG-4

If device implementations with MPEG-4 decoders, they:

  • [C-1-1] MUST support Simple Profile Level 3.

5.3.4. H.264

If device implementations support H.264 decoders, they:

  • [C-1-1] MUST support Main Profile Level 3.1 and Baseline Profile. รองรับ ASO (การสั่งซื้อชิ้นโดยพลการ), FMO (การสั่งซื้อแมคโครบล็อกที่ยืดหยุ่น) และ RS (ชิ้นส่วนซ้ำซ้อน) เป็นทางเลือก
  • [C-1-2] MUST be capable of decoding videos with the SD (Standard Definition) profiles listed in the following table and encoded with the Baseline Profile and Main Profile Level 3.1 (including 720p30).
  • ควรมีความสามารถในการถอดรหัสวิดีโอด้วยโปรไฟล์ HD (ความละเอียดสูง) ตามที่ระบุไว้ในตารางต่อไปนี้

If the height that is reported by the Display.getSupportedModes() method is equal or greater than the video resolution, device implementations:

  • [C-2-1] MUST support the HD 720p video decoding profiles in the following table.
  • [C-2-2] MUST support the HD 1080p video decoding profiles in the following table.
SD (คุณภาพต่ำ) SD (คุณภาพสูง) เอชดี 720p เอชดี 1080p
ความละเอียดวิดีโอ 320 x 240 พิกเซล 720 x 480 px 1280x720 พิกเซล 1920 x 1080 พิกเซล
อัตราเฟรมวิดีโอ 30 เฟรมต่อวินาที 30 เฟรมต่อวินาที 60 เฟรมต่อวินาที 30 fps (60 fps Television )
บิตเรตของวิดีโอ 800 kbps 2 Mbps 8 Mbps 20 Mbps

5.3.5. H.265 (HEVC)

If device implementations support H.265 codec, they:

  • [C-1-1] MUST support the Main Profile Level 3 Main tier and the SD video decoding profiles as indicated in the following table.
  • ควรสนับสนุนโปรไฟล์การถอดรหัส HD ตามที่ระบุไว้ในตารางต่อไปนี้
  • [C-1-2] MUST support the HD decoding profiles as indicated in the following table if there is a hardware decoder.

If the height that is reported by the Display.getSupportedModes() method is equal to or greater than the video resolution, then:

  • [C-2-1] Device implementations MUST support at least one of H.265 or VP9 decoding of 720, 1080 and UHD profiles.
SD (คุณภาพต่ำ) SD (คุณภาพสูง) เอชดี 720p เอชดี 1080p ยูเอชดี
ความละเอียดวิดีโอ 352 x 288 px 720 x 480 px 1280x720 พิกเซล 1920 x 1080 พิกเซล 3840 x 2160 พิกเซล
อัตราเฟรมวิดีโอ 30 เฟรมต่อวินาที 30 เฟรมต่อวินาที 30 เฟรมต่อวินาที 30/60 fps (60 fps Television with H.265 hardware decoding ) 60 เฟรมต่อวินาที
บิตเรตของวิดีโอ 600 กิโลบิตต่อวินาที 1.6 Mbps 4Mbps 5Mbps 20 Mbps

5.3.6. วีพี8

If device implementations support VP8 codec, they:

  • [C-1-1] MUST support the SD decoding profiles in the following table.
  • SHOULD use a hardware VP8 codec that meets the requirements .
  • ควรสนับสนุนโปรไฟล์การถอดรหัส HD ในตารางต่อไปนี้

If the height as reported by the Display.getSupportedModes() method is equal or greater than the video resolution, then:

  • [C-2-1] Device implementations MUST support 720p profiles in the following table.
  • [C-2-2] Device implementations MUST support 1080p profiles in the following table.
SD (คุณภาพต่ำ) SD (คุณภาพสูง) เอชดี 720p เอชดี 1080p
ความละเอียดวิดีโอ 320 x 180 พิกเซล 640 x 360 พิกเซล 1280x720 พิกเซล 1920 x 1080 พิกเซล
อัตราเฟรมวิดีโอ 30 เฟรมต่อวินาที 30 เฟรมต่อวินาที 30 fps (60 fps Television ) 30 (60 fps Television )
บิตเรตของวิดีโอ 800 kbps 2 Mbps 8 Mbps 20 Mbps

5.3.7. วีพี9

If device implementations support VP9 codec, they:

  • [C-1-1] MUST support the SD video decoding profiles as indicated in the following table.
  • ควรสนับสนุนโปรไฟล์การถอดรหัส HD ตามที่ระบุไว้ในตารางต่อไปนี้

If device implementations support VP9 codec and a hardware decoder:

  • [C-2-1] MUST support the HD decoding profiles as indicated in the following table.

If the height that is reported by the Display.getSupportedModes() method is equal to or greater than the video resolution, then:

  • [C-3-1] Device implementations MUST support at least one of VP9 or H.265 decoding of the 720, 1080 and UHD profiles.
SD (คุณภาพต่ำ) SD (คุณภาพสูง) เอชดี 720p เอชดี 1080p ยูเอชดี
ความละเอียดวิดีโอ 320 x 180 พิกเซล 640 x 360 พิกเซล 1280x720 พิกเซล 1920 x 1080 พิกเซล 3840 x 2160 พิกเซล
อัตราเฟรมวิดีโอ 30 เฟรมต่อวินาที 30 เฟรมต่อวินาที 30 เฟรมต่อวินาที 30 fps (60 fps Television with VP9 hardware decoding ) 60 เฟรมต่อวินาที
บิตเรตของวิดีโอ 600 กิโลบิตต่อวินาที 1.6 Mbps 4Mbps 5Mbps 20 Mbps

5.4. การบันทึกเสียง

While some of the requirements outlined in this section are listed as SHOULD since Android 4.3, the Compatibility Definition for future versions are planned to change these to MUST. Existing and new Android devices are STRONGLY RECOMMENDED to meet these requirements that are listed as SHOULD, or they will not be able to attain Android compatibility when upgraded to the future version.

5.4.1. บันทึกเสียงดิบ

If device implementations declare android.hardware.microphone , they:

  • [C-1-1] MUST allow capture of raw audio content with the following characteristics:

    • รูปแบบ : PCM เชิงเส้น, 16 บิต
    • Sampling rates : 8000, 11025, 16000, 44100 Hz
    • ช่องทาง : โมโน
  • [C-1-2] MUST capture at above sample rates without up-sampling.

  • [C-1-3] MUST include an appropriate anti-aliasing filter when the sample rates given above are captured with down-sampling.
  • SHOULD allow AM radio and DVD quality capture of raw audio content, which means the following characteristics:

    • รูปแบบ : PCM เชิงเส้น, 16 บิต
    • Sampling rates : 22050, 48000 Hz
    • ช่องทาง : สเตอริโอ

If device implementations allow AM radio and DVD quality capture of raw audio content, they:

  • [C-2-1] MUST capture without up-sampling at any ratio higher than 16000:22050 or 44100:48000.
  • [C-2-2] MUST include an appropriate anti-aliasing filter for any up-sampling or down-sampling.

5.4.2. จับภาพเพื่อการจดจำเสียง

If device implementations declare android.hardware.microphone , they:

  • [C-1-1] MUST capture android.media.MediaRecorder.AudioSource.VOICE_RECOGNITION audio source at one of the sampling rates, 44100 and 48000.
  • [C-1-2] MUST, by default, disable any noise reduction audio processing when recording an audio stream from the AudioSource.VOICE_RECOGNITION audio source.
  • [C-1-3] MUST, by default, disable any automatic gain control when recording an audio stream from the AudioSource.VOICE_RECOGNITION audio source.
  • SHOULD record the voice recognition audio stream with approximately flat amplitude versus frequency characteristics: specifically, ±3 dB, from 100 Hz to 4000 Hz.
  • SHOULD record the voice recognition audio stream with input sensitivity set such that a 90 dB sound power level (SPL) source at 1000 Hz yields RMS of 2500 for 16-bit samples.
  • SHOULD record the voice recognition audio stream so that the PCM amplitude levels linearly track input SPL changes over at least a 30 dB range from -18 dB to +12 dB re 90 dB SPL at the microphone.
  • SHOULD record the voice recognition audio stream with total harmonic distortion (THD) less than 1% for 1 kHz at 90 dB SPL input level at the microphone.

If device implementations declare android.hardware.microphone and noise suppression (reduction) technologies tuned for speech recognition, they:

  • [C-2-1] MUST allow this audio affect to be controllable with the android.media.audiofx.NoiseSuppressor API.
  • [C-2-2] MUST uniquely identify each noise suppression technology implementation via the AudioEffect.Descriptor.uuid field.

5.4.3. จับภาพเพื่อกำหนดเส้นทางการเล่นใหม่

คลาส android.media.MediaRecorder.AudioSource รวมถึงแหล่งเสียง REMOTE_SUBMIX

If device implementations declare both android.hardware.audio.output and android.hardware.microphone , they:

  • [C-1-1] MUST properly implement the REMOTE_SUBMIX audio source so that when an application uses the android.media.AudioRecord API to record from this audio source, it captures a mix of all audio streams except for the following:

    • AudioManager.STREAM_RING
    • AudioManager.STREAM_ALARM
    • AudioManager.STREAM_NOTIFICATION

5.5. การเล่นเสียง

Android มีการรองรับเพื่อให้แอปสามารถเล่นเสียงผ่านอุปกรณ์ต่อพ่วงเอาต์พุตเสียงตามที่กำหนดไว้ในส่วน 7.8.2

5.5.1. การเล่นเสียงดิบ

If device implementations declare android.hardware.audio.output , they:

  • [C-1-1] ต้องอนุญาตให้เล่นเนื้อหาเสียงดิบที่มีคุณสมบัติดังต่อไปนี้:

    • Format : Linear PCM, 16-bit, 8-bit, float
    • ช่องสัญญาณ : โมโน, สเตอริโอ, การกำหนดค่าหลายช่องสัญญาณที่ถูกต้องพร้อมช่องสัญญาณสูงสุด 8 ช่อง
    • Sampling rates (in Hz) :
      • 8000, 11025, 16000, 22050, 32000, 44100, 48000 at the channel configurations listed above
      • 96000 in mono and stereo
  • SHOULD allow playback of raw audio content with the following characteristics:

    • อัตราการสุ่มตัวอย่าง : 24000, 48000

5.5.2. เอฟเฟกต์เสียง

Android จัดเตรียม API สำหรับเอฟเฟกต์เสียง สำหรับการใช้งานอุปกรณ์

If device implementations declare the feature android.hardware.audio.output , they:

  • [C-1-1] MUST support the EFFECT_TYPE_EQUALIZER and EFFECT_TYPE_LOUDNESS_ENHANCER implementations controllable through the AudioEffect subclasses Equalizer , LoudnessEnhancer .
  • [C-1-2] MUST support the visualizer API implementation, controllable through the Visualizer class.
  • [C-1-3] MUST support the EFFECT_TYPE_DYNAMICS_PROCESSING implementation controllable through the AudioEffect subclass DynamicsProcessing .
  • SHOULD support the EFFECT_TYPE_BASS_BOOST , EFFECT_TYPE_ENV_REVERB , EFFECT_TYPE_PRESET_REVERB , and EFFECT_TYPE_VIRTUALIZER implementations controllable through the AudioEffect sub-classes BassBoost , EnvironmentalReverb , PresetReverb , and Virtualizer .

5.5.3. ระดับเสียงเอาต์พุตเสียง

การใช้งานอุปกรณ์ยานยนต์:

  • SHOULD allow adjusting audio volume separately per each audio stream using the content type or usage as defined by AudioAttributes and car audio usage as publicly defined in android.car.CarAudioManager .

5.6. เวลาแฝงของเสียง

แฝงเสียงคือการหน่วงเวลาเมื่อสัญญาณเสียงผ่านระบบ แอปพลิเคชันหลายคลาสพึ่งพาเวลาแฝงสั้น ๆ เพื่อให้ได้เอฟเฟกต์เสียงแบบเรียลไทม์

สำหรับวัตถุประสงค์ของส่วนนี้ให้ใช้คำจำกัดความต่อไปนี้:

  • เวลาแฝงเอาท์พุท ช่วงเวลาระหว่างเมื่อแอปพลิเคชันเขียนเฟรมของข้อมูลรหัส PCM และเมื่อเสียงที่สอดคล้องกันถูกนำเสนอต่อสภาพแวดล้อมที่ทรานสดิวเซอร์บนอุปกรณ์หรือสัญญาณออกจากอุปกรณ์ผ่านพอร์ตและสามารถสังเกตได้จากภายนอก
  • เวลาแฝงที่ส่งออกเย็น เวลาแฝงเอาท์พุทสำหรับเฟรมแรกเมื่อระบบเอาต์พุตเสียงไม่ได้ใช้งานและขับเคลื่อนลงก่อนที่จะมีการร้องขอ
  • เวลาแฝงเอาท์พุทอย่างต่อเนื่อง เวลาแฝงเอาท์พุทสำหรับเฟรมที่ตามมาหลังจากอุปกรณ์กำลังเล่นเสียง
  • แฝงอินพุต ช่วงเวลาระหว่างเมื่อมีการนำเสนอเสียงโดยสภาพแวดล้อมไปยังอุปกรณ์ที่ตัวแปลงสัญญาณบนอุปกรณ์หรือสัญญาณเข้าสู่อุปกรณ์ผ่านพอร์ตและเมื่อแอปพลิเคชันอ่านเฟรมที่สอดคล้องกันของข้อมูลรหัส PCM ที่สอดคล้องกัน
  • อินพุตที่หายไป ส่วนเริ่มต้นของสัญญาณอินพุตที่ใช้ไม่ได้หรือไม่สามารถใช้งานได้
  • เวลาแฝงอินพุตเย็น ผลรวมของเวลาอินพุตที่หายไปและเวลาแฝงอินพุตสำหรับเฟรมแรกเมื่อระบบอินพุตเสียงไม่ได้ใช้งานและใช้พลังงานก่อนการร้องขอ
  • เวลาแฝงอินพุตอย่างต่อเนื่อง แฝงอินพุตสำหรับเฟรมที่ตามมาในขณะที่อุปกรณ์กำลังจับเสียง
  • กระวนกระวายใจเอาต์พุตเย็น ความแปรปรวนระหว่างการวัดที่แยกต่างหากของค่าเวลาแฝงของเอาต์พุตเย็น
  • กระวนกระวายใจอินพุตเย็น ความแปรปรวนระหว่างการวัดค่าแฝงอินพุตเย็นแยกต่างหาก
  • เวลาแฝงการเดินทางไปกลับอย่างต่อเนื่อง ผลรวมของเวลาแฝงอินพุตอย่างต่อเนื่องรวมถึงเวลาแฝงเอาต์พุตอย่างต่อเนื่องบวกกับช่วงเวลาบัฟเฟอร์หนึ่งช่วง ระยะเวลาบัฟเฟอร์อนุญาตให้ใช้เวลาสำหรับแอปในการประมวลผลสัญญาณและเวลาสำหรับแอพเพื่อลดความแตกต่างของเฟสระหว่างอินพุตและกระแสเอาต์พุต
  • OpenSl es PCM บัฟเฟอร์คิว API ชุดของ OpenSL es ที่เกี่ยวข้องกับ PCM ภายใน Android NDK
  • AAudio native audio API . The set of AAudio APIs within Android NDK .
  • Timestamp . A pair consisting of a relative frame position within a stream and the estimated time when that frame enters or leaves the audio processing pipeline on the associated endpoint. See also AudioTimestamp .

If device implementations declare android.hardware.audio.output they are STRONGLY RECOMMENDED to meet or exceed the following requirements:

  • [C-SR] Cold output latency of 100 milliseconds or less
  • [C-SR] Continuous output latency of 45 milliseconds or less
  • [C-SR] Minimize the cold output jitter
  • [C-SR] The output timestamp returned by AudioTrack.getTimestamp and AAudioStream_getTimestamp is accurate to +/- 1 ms.

If device implementations meet the above requirements, after any initial calibration, when using both the OpenSL ES PCM buffer queue and AAudio native audio APIs, for continuous output latency and cold output latency over at least one supported audio output device, they are:

If device implementations do not meet the requirements for low-latency audio via both the OpenSL ES PCM buffer queue and AAudio native audio APIs, they:

  • [C-1-1] MUST NOT report support for low-latency audio.

If device implementations include android.hardware.microphone , they are STRONGLY RECOMMENDED to meet these input audio requirements:

  • [C-SR] Cold input latency of 100 milliseconds or less.
  • [C-SR] Continuous input latency of 30 milliseconds or less.
  • [C-SR] Continuous round-trip latency of 50 milliseconds or less.
  • [C-SR] Minimize the cold input jitter.
  • [C-SR] Limit the error in input timestamps, as returned by AudioRecord.getTimestamp or AAudioStream_getTimestamp , to +/- 1 ms.

5.7. โปรโตคอลเครือข่าย

Device implementations MUST support the media network protocols for audio and video playback as specified in the Android SDK documentation.

If device implementations include an audio or a video decoder, they:

  • [C-1-1] MUST support all required codecs and container formats in section 5.1 over HTTP(S).

  • [C-1-2] MUST support the media segment formats shown in the Media Segment Formats table below over HTTP Live Streaming draft protocol, Version 7 .

  • [C-1-3] MUST support the following RTP audio video profile and related codecs in the RTSP table below. สำหรับข้อยกเว้นโปรดดูเชิงอรรถของตารางใน ส่วนที่ 5.1

Media Segment Formats

รูปแบบเซ็กเมนต์ ข้อมูลอ้างอิง การสนับสนุนตัวแปลงสัญญาณที่จำเป็น
กระแสการขนส่ง MPEG-2 ISO 13818 ตัวแปลงสัญญาณวิดีโอ:
  • H264 AVC
  • MPEG-4 SP
  • MPEG-2
ดู หัวข้อ 5.1.3 สำหรับรายละเอียดเกี่ยวกับ H264 AVC, MPEG2-4 SP
และ MPEG-2

ตัวแปลงสัญญาณเสียง:

  • เอเอซี
ดู หัวข้อ 5.1.1 สำหรับรายละเอียดเกี่ยวกับ AAC และตัวแปร
AAC พร้อม ADTS Framing และ ID3 TAGS ISO 13818-7 ดู หัวข้อ 5.1.1 สำหรับรายละเอียดเกี่ยวกับ AAC และตัวแปรของมัน
webvtt webvtt

RTSP (RTP, SDP)

ชื่อโปรไฟล์ ข้อมูลอ้างอิง การสนับสนุนตัวแปลงสัญญาณที่จำเป็น
H264 AVC RFC 6184 ดู หัวข้อ 5.1.3 สำหรับรายละเอียดเกี่ยวกับ H264 AVC
MP4A-LATM RFC 6416 ดู หัวข้อ 5.1.1 สำหรับรายละเอียดเกี่ยวกับ AAC และตัวแปรของมัน
H263-1998 RFC 3551
RFC 4629
RFC 2190
ดู หัวข้อ 5.1.3 สำหรับรายละเอียดเกี่ยวกับ H263
H263-2000 RFC 4629 ดู หัวข้อ 5.1.3 สำหรับรายละเอียดเกี่ยวกับ H263
แอมอาร์ RFC 4867 ดู หัวข้อ 5.1.1 สำหรับรายละเอียดเกี่ยวกับ AMR-NB
AMR-WB RFC 4867 ดู หัวข้อ 5.1.1 สำหรับรายละเอียดเกี่ยวกับ AMR-WB
MP4V-ES RFC 6416 ดู หัวข้อ 5.1.3 สำหรับรายละเอียดเกี่ยวกับ MPEG-4 SP
mpeg4-generic RFC 3640 ดู หัวข้อ 5.1.1 สำหรับรายละเอียดเกี่ยวกับ AAC และตัวแปรของมัน
MP2T RFC 2250 ดู MPEG-2 Transport Stream ภายใต้การสตรีมสด HTTP สำหรับรายละเอียด

5.8. สื่อที่ปลอดภัย

If device implementations support secure video output and are capable of supporting secure surfaces, they:

  • [C-1-1] MUST declare support for Display.FLAG_SECURE .

If device implementations declare support for Display.FLAG_SECURE and support wireless display protocol, they:

  • [C-2-1] MUST secure the link with a cryptographically strong mechanism such as HDCP 2.x or higher for the displays connected through wireless protocols such as Miracast.

If device implementations declare support for Display.FLAG_SECURE and support wired external display, they:

  • [C-3-1] MUST support HDCP 1.2 or higher for all external displays connected via a user-accessible wired port.

5.9. เครื่องดนตรีอินเทอร์เฟซดิจิตอล (MIDI)

If device implementations report support for feature android.software.midi via the android.content.pm.PackageManager class, they:

  • [C-1-1] MUST support MIDI over all MIDI-capable hardware transports for which they provide generic non-MIDI connectivity, where such transports are:

  • [C-1-2] MUST support the inter-app MIDI software transport (virtual MIDI devices)

5.10. เสียงระดับมืออาชีพ

If device implementations report support for feature android.hardware.audio.pro via the android.content.pm.PackageManager class, they:

  • [C-1-1] MUST report support for feature android.hardware.audio.low_latency .
  • [C-1-2] MUST have the continuous round-trip audio latency, as defined in section 5.6 Audio Latency , MUST be 20 milliseconds or less and SHOULD be 10 milliseconds or less over at least one supported path.
  • [C-1-3] MUST include a USB port(s) supporting USB host mode and USB peripheral mode.
  • [C-1-4] MUST report support for feature android.software.midi .
  • [C-1-5] MUST meet latencies and USB audio requirements using both the OpenSL ES PCM buffer queue and AAudio native audio APIs.
  • [SR] Are STRONGLY RECOMMENDED to provide a consistent level of CPU performance while audio is active and CPU load is varying. This should be tested using SimpleSynth commit 1bd6391 . The SimpleSynth app needs to be run with below parameters and achieve zero underruns after 10 minutes:
    • Work cycles: 200,000
    • Variable load: ON (this will switch between 100% and 10% of the work cycles value every 2 seconds and is designed to test CPU governor behavior)
    • Stabilized load: OFF
  • SHOULD minimize audio clock inaccuracy and drift relative to standard time.
  • SHOULD minimize audio clock drift relative to the CPU CLOCK_MONOTONIC when both are active.
  • SHOULD minimize audio latency over on-device transducers.
  • SHOULD minimize audio latency over USB digital audio.
  • SHOULD document audio latency measurements over all paths.
  • SHOULD minimize jitter in audio buffer completion callback entry times, as this affects usable percentage of full CPU bandwidth by the callback.
  • SHOULD provide zero audio underruns (output) or overruns (input) under normal use at reported latency.
  • SHOULD provide zero inter-channel latency difference.
  • SHOULD minimize MIDI mean latency over all transports.
  • SHOULD minimize MIDI latency variability under load (jitter) over all transports.
  • SHOULD provide accurate MIDI timestamps over all transports.
  • SHOULD minimize audio signal noise over on-device transducers, including the period immediately after cold start.
  • SHOULD provide zero audio clock difference between the input and output sides of corresponding end-points, when both are active. ตัวอย่างของจุดสิ้นสุดที่สอดคล้องกันรวมถึงไมโครโฟนและลำโพงบนอุปกรณ์หรืออินพุตและเอาต์พุตแจ็คเสียง
  • SHOULD handle audio buffer completion callbacks for the input and output sides of corresponding end-points on the same thread when both are active, and enter the output callback immediately after the return from the input callback. หรือหากไม่สามารถจัดการการเรียกกลับในเธรดเดียวกันได้ให้ป้อนการโทรกลับเอาต์พุตไม่นานหลังจากป้อนการเรียกกลับอินพุตเพื่อให้แอปพลิเคชันมีเวลาที่สอดคล้องกันของด้านอินพุตและเอาต์พุต
  • SHOULD minimize the phase difference between HAL audio buffering for the input and output sides of corresponding end-points.
  • SHOULD minimize touch latency.
  • SHOULD minimize touch latency variability under load (jitter).
  • SHOULD have a latency from touch input to audio output of less than or equal to 40 ms.

If device implementations meet all of the above requirements, they:

If device implementations include a 4 conductor 3.5mm audio jack, they:

If device implementations omit a 4 conductor 3.5mm audio jack and include a USB port(s) supporting USB host mode, they:

  • [C-3-1] MUST implement the USB audio class.
  • [C-3-2] MUST have a continuous round-trip audio latency of 20 milliseconds or less over the USB host mode port using USB audio class.
  • The continuous round-trip audio latency SHOULD be 10 milliseconds or less over the USB host mode port using USB audio class.

If device implementations include an HDMI port, they:

  • [C-4-1] MUST support output in stereo and eight channels at 20-bit or 24-bit depth and 192 kHz without bit-depth loss or resampling, in at least one configuration.

5.11. จับภาพสำหรับยังไม่ได้ประมวลผล

Android includes support for recording of unprocessed audio via the android.media.MediaRecorder.AudioSource.UNPROCESSED audio source. ใน opensl es สามารถเข้าถึงได้ด้วยเร็กคอร์ดที่ตั้งไว้ล่วงหน้า SL_ANDROID_RECORDING_PRESET_UNPROCESSED

If device implementations intent to support unprocessed audio source and make it available to third-party apps, they:

  • [C-1-1] MUST report the support through the android.media.AudioManager property PROPERTY_SUPPORT_AUDIO_SOURCE_UNPROCESSED .

  • [C-1-2] MUST exhibit approximately flat amplitude-versus-frequency characteristics in the mid-frequency range: specifically ±10dB from 100 Hz to 7000 Hz for each and every microphone used to record the unprocessed audio source.

  • [C-1-3] MUST exhibit amplitude levels in the low frequency range: specifically from ±20 dB from 5 Hz to 100 Hz compared to the mid-frequency range for each and every microphone used to record the unprocessed audio source.

  • [C-1-4] MUST exhibit amplitude levels in the high frequency range: specifically from ±30 dB from 7000 Hz to 22 KHz compared to the mid-frequency range for each and every microphone used to record the unprocessed audio source.

  • [C-1-5] MUST set audio input sensitivity such that a 1000 Hz sinusoidal tone source played at 94 dB Sound Pressure Level (SPL) yields a response with RMS of 520 for 16 bit-samples (or -36 dB Full Scale for floating point/double precision samples) for each and every microphone used to record the unprocessed audio source.

  • [C-1-6] MUST have a signal-to-noise ratio (SNR) at 60 dB or higher for each and every microphone used to record the unprocessed audio source. (whereas the SNR is measured as the difference between 94 dB SPL and equivalent SPL of self noise, A-weighted).

  • [C-1-7] MUST have a total harmonic distortion (THD) less than be less than 1% for 1 kHZ at 90 dB SPL input level at each and every microphone used to record the unprocessed audio source.

  • MUST not have any other signal processing (eg Automatic Gain Control, High Pass Filter, or Echo cancellation) in the path other than a level multiplier to bring the level to desired range. กล่าวอีกนัยหนึ่ง:

  • [C-1-8] If any signal processing is present in the architecture for any reason, it MUST be disabled and effectively introduce zero delay or extra latency to the signal path.
  • [C-1-9] The level multiplier, while allowed to be on the path, MUST NOT introduce delay or latency to the signal path.

All SPL measurements are made directly next to the microphone under test. For multiple microphone configurations, these requirements apply to each microphone.

If device implementations declare android.hardware.microphone but do not support unprocessed audio source, they:

  • [C-2-1] MUST return null for the AudioManager.getProperty(PROPERTY_SUPPORT_AUDIO_SOURCE_UNPROCESSED) API method, to properly indicate the lack of support.
  • [SR] are still STRONGLY RECOMMENDED to satisfy as many of the requirements for the signal path for the unprocessed recording source.

6. เครื่องมือสำหรับนักพัฒนาและความเข้ากันได้ของตัวเลือก

6.1. เครื่องมือสำหรับนักพัฒนา

การใช้งานอุปกรณ์:

  • [C-0-1] MUST support the Android Developer Tools provided in the Android SDK.
  • สะพานดีบัก Android (adb)

    • [C-0-2] MUST support adb as documented in the Android SDK and the shell commands provided in the AOSP, which can be used by app developers, including dumpsys and cmd stats .
    • [C-0-3] MUST NOT alter the format or the contents of device system events (batterystats , diskstats, fingerprint, graphicsstats, netstats, notification, procstats) logged via the dumpsys command.
    • [C-0-10] MUST record, without omission, and make the following events accessible and available to the cmd stats shell command and the StatsManager System API class.
      • ActivityForegroundStateChanged
      • AnomalyDetected
      • AppBreadcrumbReported
      • AppCrashOccurred
      • AppStartOccurred
      • BatteryLevelChanged
      • BatterySaverModeStateChanged
      • BleScanResultReceived
      • BleScanStateChanged
      • ChargingStateChanged
      • DeviceIdleModeStateChanged
      • ForegroundServiceStateChanged
      • GpsScanStateChanged
      • JobStateChanged
      • PluggedStateChanged
      • ScheduledJobStateChanged
      • ScreenStateChanged
      • SyncStateChanged
      • SystemElapsedRealtime
      • UidProcessStateChanged
      • WakelockStateChanged
      • WakeupAlarmOccurred
      • WifiLockStateChanged
      • WifiMulticastLockStateChanged
      • WifiScanStateChanged
    • [C-0-4] MUST have the device-side adb daemon be inactive by default and there MUST be a user-accessible mechanism to turn on the Android Debug Bridge.
    • [C-0-5] MUST support secure adb. Android includes support for secure adb. Secure adb enables adb on known authenticated hosts.
    • [C-0-6] MUST provide a mechanism allowing adb to be connected from a host machine. ตัวอย่างเช่น:

      • Device implementations without a USB port supporting peripheral mode MUST implement adb via local-area network (such as Ethernet or Wi-Fi).
      • MUST provide drivers for Windows 7, 9 and 10, allowing developers to connect to the device using the adb protocol.
  • Dalvik Debug Monitor Service (ddms)

    • [C-0-7] MUST support all ddms features as documented in the Android SDK. As ddms uses adb, support for ddms SHOULD be inactive by default, but MUST be supported whenever the user has activated the Android Debug Bridge, as above.
  • ลิง
    • [C-0-8] MUST include the Monkey framework and make it available for applications to use.
  • SysTrace
    • [C-0-9] MUST support the systrace tool as documented in the Android SDK. Systrace must be inactive by default and there MUST be a user-accessible mechanism to turn on Systrace.

If device implementations report the support of Vulkan 1.0 or higher via the android.hardware.vulkan.version feature flags, they:

  • [C-1-1] MUST provide an affordance for the app developer to enable/disable GPU debug layers.
  • [C-1-2] MUST, when the GPU debug layers are enabled, enumerate layers in libraries provided by external tools (ie not part of the platform or application package) found in debuggable applications' base directory to support vkEnumerateInstanceLayerProperties() and vkCreateInstance() API methods.

6.2. ตัวเลือกนักพัฒนา

Android includes support for developers to configure application development-related settings.

Device implementations MUST provide a consistent experience for Developer Options, they:

  • [C-0-1] MUST honor the android.settings.APPLICATION_DEVELOPMENT_SETTINGS intent to show application development-related settings. The upstream Android implementation hides the Developer Options menu by default and enables users to launch Developer Options after pressing seven (7) times on the Settings > About Device > Build Number menu item.
  • [C-0-2] MUST hide Developer Options by default.
  • [C-0-3] MUST provide a clear mechanism that does not give preferential treatment to one third-party app as opposed to another to enable Developer Options. MUST provide a public visible document or website that describes how to enable Developer Options. This document or website MUST be linkable from the Android SDK documents.
  • SHOULD have an ongoing visual notification to the user when Developer Options is enabled and the safety of the user is of concern.
  • MAY temporarily limit access to the Developer Options menu, by visually hiding or disabling the menu, to prevent distraction for scenarios where the safety of the user is of concern.

7. ความเข้ากันได้ของฮาร์ดแวร์

If a device includes a particular hardware component that has a corresponding API for third-party developers:

  • [C-0-1] The device implementation MUST implement that API as described in the Android SDK documentation.

If an API in the SDK interacts with a hardware component that is stated to be optional and the device implementation does not possess that component:

  • [C-0-2] Complete class definitions (as documented by the SDK) for the component APIs MUST still be presented.
  • [C-0-3] The API's behaviors MUST be implemented as no-ops in some reasonable fashion.
  • [C-0-4] API methods MUST return null values where permitted by the SDK documentation.
  • [C-0-5] API methods MUST return no-op implementations of classes where null values are not permitted by the SDK documentation.
  • [C-0-6] API methods MUST NOT throw exceptions not documented by the SDK documentation.
  • [C-0-7] Device implementations MUST consistently report accurate hardware configuration information via the getSystemAvailableFeatures() and hasSystemFeature(String) methods on the android.content.pm.PackageManager class for the same build fingerprint.

A typical example of a scenario where these requirements apply is the telephony API: Even on non-phone devices, these APIs must be implemented as reasonable no-ops.

7.1. จอแสดงผลและกราฟิก

Android includes facilities that automatically adjust application assets and UI layouts appropriately for the device to ensure that third-party applications run well on a variety of hardware configurations . Devices MUST properly implement these APIs and behaviors, as detailed in this section.

The units referenced by the requirements in this section are defined as follows:

  • physical diagonal size . The distance in inches between two opposing corners of the illuminated portion of the display.
  • dots per inch (dpi) . The number of pixels encompassed by a linear horizontal or vertical span of 1”. Where dpi values are listed, both horizontal and vertical dpi must fall within the range.
  • aspect ratio . The ratio of the pixels of the longer dimension to the shorter dimension of the screen. For example, a display of 480x854 pixels would be 854/480 = 1.779, or roughly “16:9”.
  • density-independent pixel (dp) . The virtual pixel unit normalized to a 160 dpi screen, calculated as: pixels = dps * (density/160).

7.1.1. การกำหนดค่าหน้าจอ

7.1.1.1. ขนาดและรูปร่างหน้าจอ

The Android UI framework supports a variety of different logical screen layout sizes, and allows applications to query the current configuration's screen layout size via Configuration.screenLayout with the SCREENLAYOUT_SIZE_MASK and Configuration.smallestScreenWidthDp .

การใช้งานอุปกรณ์:

  • [C-0-1] MUST report the correct layout size for the Configuration.screenLayout as defined in the Android SDK documentation. Specifically, device implementations MUST report the correct logical density-independent pixel (dp) screen dimensions as below:

    • Devices with the Configuration.uiMode set as any value other than UI_MODE_TYPE_WATCH, and reporting a small size for the Configuration.screenLayout , MUST have at least 426 dp x 320 dp.
    • Devices reporting a normal size for the Configuration.screenLayout , MUST have at least 480 dp x 320 dp.
    • Devices reporting a large size for the Configuration.screenLayout , MUST have at least 640 dp x 480 dp.
    • Devices reporting a xlarge size for the Configuration.screenLayout , MUST have at least 960 dp x 720 dp.
  • [C-0-2] MUST correctly honor applications' stated support for screen sizes through the < supports-screens > attribute in the AndroidManifest.xml, as described in the Android SDK documentation.

  • MAY have a display with rounded corners.

If device implementations support UI_MODE_TYPE_NORMAL and include a display with rounded corners, they:

  • [C-1-1] MUST ensure that the radius of the rounded corners is less than or equal to 38 dp.
  • SHOULD include user affordance to switch to the display mode with the rectangular corners.
7.1.1.2. อัตราส่วนภาพของหน้าจอ

While there is no restriction to the screen aspect ratio value of the physical screen display, the screen aspect ratio of the logical display that third-party apps are rendered within, as can be derived from the height and width values reported through the view.Display APIs and Configuration API, MUST meet the following requirements:

  • [C-0-1] Device implementations with the Configuration.uiMode set as UI_MODE_TYPE_NORMAL MUST have an aspect ratio value between 1.3333 (4:3) and 1.86 (roughly 16:9), unless the app can be deemed as ready to be stretched longer by meeting one of the following conditions:

    • The app has declared that it supports a larger screen aspect ratio through the android.max_aspect metadata value.
    • The app declares it is resizeable via the android:resizeableActivity attribute.
    • The app is targeting API level 24 or higher and does not declare a android:MaxAspectRatio that would restrict the allowed aspect ratio.
  • [C-0-2] Device implementations with the Configuration.uiMode set as UI_MODE_TYPE_WATCH MUST have an aspect ratio value set as 1.0 (1:1).

7.1.1.3. ความหนาแน่นของหน้าจอ

The Android UI framework defines a set of standard logical densities to help application developers target application resources.

  • [C-0-1] By default, device implementations MUST report only one of the following logical Android framework densities through the DENSITY_DEVICE_STABLE API and this value MUST NOT change at any time; however, the device MAY report a different arbitrary density according to the display configuration changes made by the user (for example, display size) set after initial boot.

    • 120 จุดต่อนิ้ว (ldpi)
    • 160 dpi (mdpi)
    • 213 จุดต่อนิ้ว (tvdpi)
    • 240 จุดต่อนิ้ว (hdpi)
    • 260 dpi (260dpi)
    • 280 จุดต่อนิ้ว (280 จุดต่อนิ้ว)
    • 300 dpi (300dpi)
    • 320 จุดต่อนิ้ว (xhdpi)
    • 340 dpi (340dpi)
    • 360 จุดต่อนิ้ว (360 จุดต่อนิ้ว)
    • 400 จุดต่อนิ้ว (400 จุดต่อนิ้ว)
    • 420 จุดต่อนิ้ว (420 จุดต่อนิ้ว)
    • 480 จุดต่อนิ้ว (xxhdpi)
    • 560 จุดต่อนิ้ว (560 จุดต่อนิ้ว)
    • 640 จุดต่อนิ้ว (xxxhdpi)
  • Device implementations SHOULD define the standard Android framework density that is numerically closest to the physical density of the screen, unless that logical density pushes the reported screen size below the minimum supported. If the standard Android framework density that is numerically closest to the physical density results in a screen size that is smaller than the smallest supported compatible screen size (320 dp width), device implementations SHOULD report the next lowest standard Android framework density.

If there is an affordance to change the display size of the device:

  • [C-1-1] The display size MUST NOT be scaled any larger than 1.5 times the native density or produce an effective minimum screen dimension smaller than 320dp (equivalent to resource qualifier sw320dp), whichever comes first.
  • [C-1-2] Display size MUST NOT be scaled any smaller than 0.85 times the native density.
  • To ensure good usability and consistent font sizes, it is RECOMMENDED that the following scaling of Native Display options be provided (while complying with the limits specified above)
  • Small: 0.85x
  • Default: 1x (Native display scale)
  • Large: 1.15x
  • Larger: 1.3x
  • Largest 1.45x

7.1.2. เมตริกการแสดงผล

If device implementations include a screen or video output, they:

If device implementations does not include an embedded screen or video output, they:

  • [C-2-1] MUST report reasonable values for all display metrics defined in the android.util.DisplayMetrics API for the emulated default view.Display .

7.1.3. การวางแนวหน้าจอ

การใช้งานอุปกรณ์:

  • [C-0-1] MUST report which screen orientations they support ( android.hardware.screen.portrait and/or android.hardware.screen.landscape ) and MUST report at least one supported orientation. For example, a device with a fixed orientation landscape screen, such as a television or laptop, SHOULD only report android.hardware.screen.landscape .
  • [C-0-2] MUST report the correct value for the device's current orientation, whenever queried via the android.content.res.Configuration.orientation , android.view.Display.getOrientation() , or other APIs.

If device implementations support both screen orientations, they:

  • [C-1-1] MUST support dynamic orientation by applications to either portrait or landscape screen orientation. That is, the device must respect the application's request for a specific screen orientation.
  • [C-1-2] MUST NOT change the reported screen size or density when changing orientation.
  • MAY select either portrait or landscape orientation as the default.

7.1.4. การเร่งความเร็วกราฟิก 2D และ 3D

7.1.4.1 OpenGL ES

การใช้งานอุปกรณ์:

  • [C-0-1] MUST correctly identify the supported OpenGL ES versions (1.1, 2.0, 3.0, 3.1, 3.2) through the managed APIs (such as via the GLES10.getString() method) and the native APIs.
  • [C-0-2] MUST include the support for all the corresponding managed APIs and native APIs for every OpenGL ES versions they identified to support.

If device implementations include a screen or video output, they:

  • [C-1-1] MUST support both OpenGL ES 1.1 and 2.0, as embodied and detailed in the Android SDK documentation .
  • [SR] are STRONGLY RECOMMENDED to support OpenGL ES 3.1.
  • SHOULD support OpenGL ES 3.2.

If device implementations support any of the OpenGL ES versions, they:

  • [C-2-1] MUST report via the OpenGL ES managed APIs and native APIs any other OpenGL ES extensions they have implemented, and conversely MUST NOT report extension strings that they do not support.
  • [C-2-2] MUST support the EGL_KHR_image , EGL_KHR_image_base , EGL_ANDROID_image_native_buffer , EGL_ANDROID_get_native_client_buffer , EGL_KHR_wait_sync , EGL_KHR_get_all_proc_addresses , EGL_ANDROID_presentation_time , EGL_KHR_swap_buffers_with_damage and EGL_ANDROID_recordable extensions.
  • [SR] are STRONGLY RECOMMENDED to support EGL_KHR_partial_update.
  • SHOULD accurately report via the getString() method, any texture compression format that they support, which is typically vendor-specific.

If device implementations declare support for OpenGL ES 3.0, 3.1, or 3.2, they:

  • [C-3-1] MUST export the corresponding function symbols for these version in addition to the OpenGL ES 2.0 function symbols in the libGLESv2.so library.

If device implementations support OpenGL ES 3.2, they:

  • [C-4-1] MUST support the OpenGL ES Android Extension Pack in its entirety.

If device implementations support the OpenGL ES Android Extension Pack in its entirety, they:

  • [C-5-1] MUST identify the support through the android.hardware.opengles.aep feature flag.

If device implementations expose support for the EGL_KHR_mutable_render_buffer extension, they:

  • [C-6-1] MUST also support the EGL_ANDROID_front_buffer_auto_refresh extension.
7.1.4.2 วัลแคน

Android includes support for Vulkan , a low-overhead, cross-platform API for high-performance 3D graphics.

If device implementations support OpenGL ES 3.1, they:

  • [SR] Are STRONGLY RECOMMENDED to include support for Vulkan 1.1.

If device implementations include a screen or video output, they:

  • SHOULD include support for Vulkan 1.1.

If device implementations include support for Vulkan 1.0, they:

  • [C-1-1] MUST report the correct integer value with the android.hardware.vulkan.level and android.hardware.vulkan.version feature flags.
  • [C-1-2] MUST enumerate, at least one VkPhysicalDevice for the Vulkan native API vkEnumeratePhysicalDevices() .
  • [C-1-3] MUST fully implement the Vulkan 1.0 APIs for each enumerated VkPhysicalDevice .
  • [C-1-4] MUST enumerate layers, contained in native libraries named as libVkLayer*.so in the application package's native library directory, through the Vulkan native APIs vkEnumerateInstanceLayerProperties() and vkEnumerateDeviceLayerProperties() .
  • [C-1-5] MUST NOT enumerate layers provided by libraries outside of the application package, or provide other ways of tracing or intercepting the Vulkan API, unless the application has the android:debuggable attribute set as true .
  • [C-1-6] MUST report all extension strings that they do support via the Vulkan native APIs , and conversely MUST NOT report extension strings that they do not correctly support.
  • [C-1-7] MUST support the VK_KHR_surface, VK_KHR_android_surface, VK_KHR_swapchain, and VK_KHR_incremental_present extensions.

If device implementations do not include support for Vulkan 1.0, they:

  • [C-2-1] MUST NOT declare any of the Vulkan feature flags (eg android.hardware.vulkan.level , android.hardware.vulkan.version ).
  • [C-2-2] MUST NOT enumerate any VkPhysicalDevice for the Vulkan native API vkEnumeratePhysicalDevices() .

If device implementations include support for Vulkan 1.1, they:

  • [C-3-1] MUST expose support for the SYNC_FD external semaphore and handle types.
  • [SR] Are STRONGLY RECOMMENDED to support the VK_ANDROID_external_memory_android_hardware_buffer extension.
7.1.4.3 RenderScript
  • [C-0-1] Device implementations MUST support Android RenderScript , as detailed in the Android SDK documentation.
7.1.4.4 2D Graphics Acceleration

Android includes a mechanism for applications to declare that they want to enable hardware acceleration for 2D graphics at the Application, Activity, Window, or View level through the use of a manifest tag android:hardwareAccelerated or direct API calls.

การใช้งานอุปกรณ์:

  • [C-0-1] MUST enable hardware acceleration by default, and MUST disable hardware acceleration if the developer so requests by setting android:hardwareAccelerated="false” or disabling hardware acceleration directly through the Android View APIs.
  • [C-0-2] MUST exhibit behavior consistent with the Android SDK documentation on hardware acceleration .

Android includes a TextureView object that lets developers directly integrate hardware-accelerated OpenGL ES textures as rendering targets in a UI hierarchy.

การใช้งานอุปกรณ์:

  • [C-0-3] MUST support the TextureView API, and MUST exhibit consistent behavior with the upstream Android implementation.
7.1.4.5 Wide-gamut Displays

If device implementations claim support for wide-gamut displays through Configuration.isScreenWideColorGamut() , they:

  • [C-1-1] MUST have a color-calibrated display.
  • [C-1-2] MUST have a display whose gamut covers the sRGB color gamut entirely in CIE 1931 xyY space.
  • [C-1-3] MUST have a display whose gamut has an area of at least 90% of DCI-P3 in CIE 1931 xyY space.
  • [C-1-4] MUST support OpenGL ES 3.1 or 3.2 and report it properly.
  • [C-1-5] MUST advertise support for the EGL_KHR_no_config_context , EGL_EXT_pixel_format_float , EGL_KHR_gl_colorspace , EGL_EXT_gl_colorspace_scrgb , EGL_EXT_gl_colorspace_scrgb_linear , EGL_EXT_gl_colorspace_display_p3 , and EGL_KHR_gl_colorspace_display_p3 extensions.
  • [SR] Are STRONGLY RECOMMENDED to support GL_EXT_sRGB .

Conversely, if device implementations do not support wide-gamut displays, they:

  • [C-2-1] SHOULD cover 100% or more of sRGB in CIE 1931 xyY space, although the screen color gamut is undefined.

7.1.5. โหมดความเข้ากันได้ของแอปพลิเคชันรุ่นเก่า

Android specifies a “compatibility mode” in which the framework operates in a 'normal' screen size equivalent (320dp width) mode for the benefit of legacy applications not developed for old versions of Android that pre-date screen-size independence.

7.1.6. เทคโนโลยีหน้าจอ

The Android platform includes APIs that allow applications to render rich graphics to the display. Devices MUST support all of these APIs as defined by the Android SDK unless specifically allowed in this document.

การใช้งานอุปกรณ์:

  • [C-0-1] MUST support displays capable of rendering 16-bit color graphics.
  • SHOULD support displays capable of 24-bit color graphics.
  • [C-0-2] MUST support displays capable of rendering animations.
  • [C-0-3] MUST use the display technology that have a pixel aspect ratio (PAR) between 0.9 and 1.15. That is, the pixel aspect ratio MUST be near square (1.0) with a 10 ~ 15% tolerance.

7.1.7. จอแสดงผลรอง

Android includes support for secondary display to enable media sharing capabilities and developer APIs for accessing external displays.

If device implementations support an external display either via a wired, wireless, or an embedded additional display connection, they:

  • [C-1-1] MUST implement the DisplayManager system service and API as described in the Android SDK documentation.

7.2. อุปกรณ์อินพุต

การใช้งานอุปกรณ์:

7.2.1. คีย์บอร์ด

If device implementations include support for third-party Input Method Editor (IME) applications, they:

Device implementations: * [C-0-1] MUST NOT include a hardware keyboard that does not match one of the formats specified in android.content.res.Configuration.keyboard (QWERTY or 12-key). * SHOULD include additional soft keyboard implementations. * MAY include a hardware keyboard.

7.2.2. การนำทางแบบไม่สัมผัส

Android includes support for d-pad, trackball, and wheel as mechanisms for non-touch navigation.

การใช้งานอุปกรณ์:

If device implementations lack non-touch navigations, they:

  • [C-1-1] MUST provide a reasonable alternative user interface mechanism for the selection and editing of text, compatible with Input Management Engines. The upstream Android open source implementation includes a selection mechanism suitable for use with devices that lack non-touch navigation inputs.

7.2.3. ปุ่มนำทาง

The Home , Recents , and Back functions typically provided via an interaction with a dedicated physical button or a distinct portion of the touch screen, are essential to the Android navigation paradigm and therefore, device implementations:

  • [C-0-1] MUST provide a user affordance to launch installed applications that have an activity with the <intent-filter> set with ACTION=MAIN and CATEGORY=LAUNCHER or CATEGORY=LEANBACK_LAUNCHER for Television device implementations. The Home function SHOULD be the mechanism for this user affordance.
  • SHOULD provide buttons for the Recents and Back function.

If the Home, Recents, or Back functions are provided, they:

  • [C-1-1] MUST be accessible with a single action (eg tap, double-click or gesture) when any of them are accessible.
  • [C-1-2] MUST provide a clear indication of which single action would trigger each function. Having a visible icon imprinted on the button, showing a software icon on the navigation bar portion of the screen, or walking the user through a guided step-by-step demo flow during the out-of-box setup experience are examples of such an ข้อบ่งชี้

การใช้งานอุปกรณ์:

  • [SR] are STRONGLY RECOMMENDED to not provide the input mechanism for the Menu function as it is deprecated in favor of action bar since Android 4.0.

If device implementations provide the Menu function, they:

  • [C-2-1] MUST display the action overflow button whenever the action overflow menu popup is not empty and the action bar is visible.
  • [C-2-2] ต้องไม่แก้ไขตำแหน่งของป๊อปอัปการดำเนินการโอเวอร์โฟลว์ที่แสดงโดยการเลือกปุ่มโอเวอร์โฟลว์ในแถบการทำงาน แต่อาจแสดงป๊อปอัปการดำเนินการโอเวอร์โฟลว์ในตำแหน่งที่แก้ไขบนหน้าจอเมื่อแสดงโดยการเลือกเมนู การทำงาน.

If device implementations do not provide the Menu function, for backwards compatibility, they: * [C-3-1] MUST make the Menu function available to applications when targetSdkVersion is less than 10, either by a physical button, a software key, or ท่าทาง This Menu function should be accessible unless hidden together with other navigation functions.

If device implementations provide the Assist function , they: * [C-4-1] MUST make the Assist function accessible with a single action (eg tap, double-click or gesture) when other navigation keys are accessible. * [SR] STRONGLY RECOMMENDED to use long press on HOME function as this designated interaction.

หากการใช้งานอุปกรณ์ใช้ส่วนที่แตกต่างกันของหน้าจอเพื่อแสดงปุ่มนำทาง พวกเขา:

  • [C-5-1] Navigation keys MUST use a distinct portion of the screen, not available to applications, and MUST NOT obscure or otherwise interfere with the portion of the screen available to applications.
  • [C-5-2] MUST make available a portion of the display to applications that meets the requirements defined in section 7.1.1 .
  • [C-5-3] MUST honor the flags set by the app through the View.setSystemUiVisibility() API method, so that this distinct portion of the screen (aka the navigation bar) is properly hidden away as documented in the SDK.

7.2.4. อินพุตหน้าจอสัมผัส

Android includes support for a variety of pointer input systems, such as touchscreens, touch pads, and fake touch input devices. Touchscreen-based device implementations are associated with a display such that the user has the impression of directly manipulating items on screen. Since the user is directly touching the screen, the system does not require any additional affordances to indicate the objects being manipulated.

การใช้งานอุปกรณ์:

  • SHOULD have a pointer input system of some kind (either mouse-like or touch).
  • SHOULD support fully independently tracked pointers.

If device implementations include a touchscreen (single-touch or better), they:

  • [C-1-1] MUST report TOUCHSCREEN_FINGER for the Configuration.touchscreen API field.
  • [C-1-2] MUST report the android.hardware.touchscreen and android.hardware.faketouch feature flags.

If device implementations include a touchscreen that can track more than a single touch, they:

  • [C-2-1] MUST report the appropriate feature flags android.hardware.touchscreen.multitouch , android.hardware.touchscreen.multitouch.distinct , android.hardware.touchscreen.multitouch.jazzhand corresponding to the type of the specific touchscreen on the อุปกรณ์.

If device implementations do not include a touchscreen (and rely on a pointer device only) and meet the fake touch requirements in section 7.2.5 , they:

  • [C-3-1] MUST NOT report any feature flag starting with android.hardware.touchscreen and MUST report only android.hardware.faketouch .

7.2.5. อินพุตสัมผัสปลอม

Fake touch interface provides a user input system that approximates a subset of touchscreen capabilities. For example, a mouse or remote control that drives an on-screen cursor approximates touch, but requires the user to first point or focus then click. Numerous input devices like the mouse, trackpad, gyro-based air mouse, gyro-pointer, joystick, and multi-touch trackpad can support fake touch interactions. Android includes the feature constant android.hardware.faketouch, which corresponds to a high-fidelity non-touch (pointer-based) input device such as a mouse or trackpad that can adequately emulate touch-based input (including basic gesture support), and indicates that the device supports an emulated subset of touchscreen functionality.

If device implementations do not include a touchscreen but include another pointer input system which they want to make available, they:

  • SHOULD declare support for the android.hardware.faketouch feature flag.

If device implementations declare support for android.hardware.faketouch , they:

  • [C-1-1] MUST report the absolute X and Y screen positions of the pointer location and display a visual pointer on the screen.
  • [C-1-2] MUST report touch event with the action code that specifies the state change that occurs on the pointer going down or up on the screen .
  • [C-1-3] MUST support pointer down and up on an object on the screen, which allows users to emulate tap on an object on the screen.
  • [C-1-4] MUST support pointer down, pointer up, pointer down then pointer up in the same place on an object on the screen within a time threshold, which allows users to emulate double tap on an object on the screen.
  • [C-1-5] MUST support pointer down on an arbitrary point on the screen, pointer move to any other arbitrary point on the screen, followed by a pointer up, which allows users to emulate a touch drag.
  • [C-1-6] MUST support pointer down then allow users to quickly move the object to a different position on the screen and then pointer up on the screen, which allows users to fling an object on the screen.
  • [C-1-7] MUST report TOUCHSCREEN_NOTOUCH for the Configuration.touchscreen API field.

If device implementations declare support for android.hardware.faketouch.multitouch.distinct , they:

  • [C-2-1] MUST declare support for android.hardware.faketouch .
  • [C-2-2] MUST support distinct tracking of two or more independent pointer inputs.

If device implementations declare support for android.hardware.faketouch.multitouch.jazzhand , they:

  • [C-3-1] MUST declare support for android.hardware.faketouch .
  • [C-3-2] MUST support distinct tracking of 5 (tracking a hand of fingers) or more pointer inputs fully independently.

7.2.6. รองรับคอนโทรลเลอร์เกม

7.2.6.1. การแมปปุ่ม

If device implementations declare the android.hardware.gamepad feature flag, they:

  • [C-1-1] MUST have embed a controller or ship with a separate controller in the box, that would provide means to input all the events listed in the below tables.
  • [C-1-2] MUST be capable to map HID events to it's associated Android view.InputEvent constants as listed in the below tables. The upstream Android implementation includes implementation for game controllers that satisfies this requirement.
ปุ่ม HID Usage 2 ปุ่มแอนดรอยด์
เอ 1 0x09 0x0001 KEYCODE_BUTTON_A (96)
บี 1 0x09 0x0002 KEYCODE_BUTTON_B (97)
เอ็กซ์ 1 0x09 0x0004 KEYCODE_BUTTON_X (99)
ใช่ 1 0x09 0x0005 KEYCODE_BUTTON_Y (100)
D-pad up 1
D-pad down 1
0x01 0x0039 3 AXIS_HAT_Y 4
D-pad left 1
D-pad right 1
0x01 0x0039 3 AXIS_HAT_X 4
Left shoulder button 1 0x09 0x0007 KEYCODE_BUTTON_L1 (102)
Right shoulder button 1 0x09 0x0008 KEYCODE_BUTTON_R1 (103)
Left stick click 1 0x09 0x000E KEYCODE_BUTTON_THUMBL (106)
Right stick click 1 0x09 0x000F KEYCODE_BUTTON_THUMBR (107)
บ้าน 1 0x0c 0x0223 KEYCODE_HOME (3)
กลับ 1 0x0c 0x0224 KEYCODE_BACK (4)

1 KeyEvent

2 The above HID usages must be declared within a Game pad CA (0x01 0x0005).

3 This usage must have a Logical Minimum of 0, a Logical Maximum of 7, a Physical Minimum of 0, a Physical Maximum of 315, Units in Degrees, and a Report Size of 4. The logical value is defined to be the clockwise rotation away from the vertical axis; for example, a logical value of 0 represents no rotation and the up button being pressed, while a logical value of 1 represents a rotation of 45 degrees and both the up and left keys being pressed.

4 MotionEvent

Analog Controls 1 HID Usage ปุ่มแอนดรอยด์
ทริกเกอร์ซ้าย 0x02 0x00C5 AXIS_LTRIGGER
Right Trigger 0x02 0x00C4 AXIS_RTRIGGER
Left Joystick 0x01 0x0030
0x01 0x0031
AXIS_X
AXIS_Y
จอยสติ๊กขวา 0x01 0x0032
0x01 0x0035
AXIS_Z
AXIS_RZ

1 MotionEvent

7.2.7. รีโมท

See Section 2.3.1 for device-specific requirements.

7.3. เซนเซอร์

If device implementations include a particular sensor type that has a corresponding API for third-party developers, the device implementation MUST implement that API as described in the Android SDK documentation and the Android Open Source documentation on sensors .

การใช้งานอุปกรณ์:

  • [C-0-1] MUST accurately report the presence or absence of sensors per the android.content.pm.PackageManager class.
  • [C-0-2] MUST return an accurate list of supported sensors via the SensorManager.getSensorList() and similar methods.
  • [C-0-3] MUST behave reasonably for all other sensor APIs (for example, by returning true or false as appropriate when applications attempt to register listeners, not calling sensor listeners when the corresponding sensors are not present; etc.).

If device implementations include a particular sensor type that has a corresponding API for third-party developers, they:

  • [C-1-1] MUST report all sensor measurements using the relevant International System of Units (metric) values for each sensor type as defined in the Android SDK documentation.
  • [C-1-2] MUST report sensor data with a maximum latency of 100 milliseconds + 2 * sample_time for the case of a sensor streamed with a minimum required latency of 5 ms + 2 * sample_time when the application processor is active. This delay does not include any filtering delays.
  • [C-1-3] MUST report the first sensor sample within 400 milliseconds + 2 * sample_time of the sensor being activated. It is acceptable for this sample to have an accuracy of 0.
  • [SR] SHOULD report the event time in nanoseconds as defined in the Android SDK documentation, representing the time the event happened and synchronized with the SystemClock.elapsedRealtimeNano() clock. Existing and new Android devices are STRONGLY RECOMMENDED to meet these requirements so they will be able to upgrade to the future platform releases where this might become a REQUIRED component. The synchronization error SHOULD be below 100 milliseconds.

  • [C-1-4] For any API indicated by the Android SDK documentation to be a continuous sensor , device implementations MUST continuously provide periodic data samples that SHOULD have a jitter below 3%, where jitter is defined as the standard deviation of the difference of the reported timestamp values between consecutive events.

  • [C-1-5] MUST ensure that the sensor event stream MUST NOT prevent the device CPU from entering a suspend state or waking up from a suspend state.

  • When several sensors are activated, the power consumption SHOULD NOT exceed the sum of the individual sensor's reported power consumption.

The list above is not comprehensive; the documented behavior of the Android SDK and the Android Open Source Documentations on sensors is to be considered authoritative.

Some sensor types are composite, meaning they can be derived from data provided by one or more other sensors. (Examples include the orientation sensor and the linear acceleration sensor.)

การใช้งานอุปกรณ์:

  • SHOULD implement these sensor types, when they include the prerequisite physical sensors as described in sensor types .

If device implementations include a composite sensor, they:

  • [C-2-1] MUST implement the sensor as described in the Android Open Source documentation on composite sensors .

7.3.1. มาตรความเร่ง

  • Device implementations SHOULD include a 3-axis accelerometer.

If device implementations include a 3-axis accelerometer, they:

  • [C-1-1] MUST be able to report events up to a frequency of at least 50 Hz.
  • [C-1-2] MUST implement and report TYPE_ACCELEROMETER sensor.
  • [C-1-3] MUST comply with the Android sensor coordinate system as detailed in the Android APIs.
  • [C-1-4] MUST be capable of measuring from freefall up to four times the gravity(4g) or more on any axis.
  • [C-1-5] MUST have a resolution of at least 12-bits.
  • [C-1-6] MUST have a standard deviation no greater than 0.05 m/s^, where the standard deviation should be calculated on a per axis basis on samples collected over a period of at least 3 seconds at the fastest sampling rate.
  • [SR] are STRONGLY RECOMMENDED to implement the TYPE_SIGNIFICANT_MOTION composite sensor.
  • [SR] are STRONGLY RECOMMENDED to implement the TYPE_ACCELEROMETER_UNCALIBRATED sensor if online accelerometer calibration is available.
  • SHOULD implement the TYPE_SIGNIFICANT_MOTION , TYPE_TILT_DETECTOR , TYPE_STEP_DETECTOR , TYPE_STEP_COUNTER composite sensors as described in the Android SDK document.
  • SHOULD report events up to at least 200 Hz.
  • SHOULD have a resolution of at least 16-bits.
  • SHOULD be calibrated while in use if the characteristics changes over the life cycle and compensated, and preserve the compensation parameters between device reboots.
  • SHOULD be temperature compensated.
  • SHOULD also implement TYPE_ACCELEROMETER_UNCALIBRATED sensor.

If device implementations include a 3-axis accelerometer and any of the TYPE_SIGNIFICANT_MOTION , TYPE_TILT_DETECTOR , TYPE_STEP_DETECTOR , TYPE_STEP_COUNTER composite sensors are implemented:

  • [C-2-1] The sum of their power consumption MUST always be less than 4 mW.
  • SHOULD each be below 2 mW and 0.5 mW for when the device is in a dynamic or static condition.

If device implementations include a 3-axis accelerometer and a gyroscope sensor, they:

  • [C-3-1] MUST implement the TYPE_GRAVITY and TYPE_LINEAR_ACCELERATION composite sensors.
  • SHOULD implement the TYPE_GAME_ROTATION_VECTOR composite sensor.
  • [SR] Existing and new Android devices are STRONGLY RECOMMENDED to implement the TYPE_GAME_ROTATION_VECTOR sensor.

If device implementations include a 3-axis accelerometer, a gyroscope sensor and a magnetometer sensor, they:

  • [C-4-1] MUST implement a TYPE_ROTATION_VECTOR composite sensor.

7.3.2. แมกนีโตมิเตอร์

  • Device implementations SHOULD include a 3-axis magnetometer (compass).

If device implementations include a 3-axis magnetometer, they:

  • [C-1-1] MUST implement the TYPE_MAGNETIC_FIELD sensor.
  • [C-1-2] MUST be able to report events up to a frequency of at least 10 Hz and SHOULD report events up to at least 50 Hz.
  • [C-1-3] MUST comply with the Android sensor coordinate system as detailed in the Android APIs.
  • [C-1-4] MUST be capable of measuring between -900 µT and +900 µT on each axis before saturating.
  • [C-1-5] MUST have a hard iron offset value less than 700 µT and SHOULD have a value below 200 µT, by placing the magnetometer far from dynamic (current-induced) and static (magnet-induced) magnetic fields.
  • [C-1-6] MUST have a resolution equal or denser than 0.6 µT.
  • [C-1-7] MUST support online calibration and compensation of the hard iron bias, and preserve the compensation parameters between device reboots.
  • [C-1-8] MUST have the soft iron compensation applied—the calibration can be done either while in use or during the production of the device.
  • [C-1-9] MUST have a standard deviation, calculated on a per axis basis on samples collected over a period of at least 3 seconds at the fastest sampling rate, no greater than 1.5 µT; SHOULD have a standard deviation no greater than 0.5 µT.
  • SHOULD implement TYPE_MAGNETIC_FIELD_UNCALIBRATED sensor.
  • [SR] Existing and new Android devices are STRONGLY RECOMMENDED to implement the TYPE_MAGNETIC_FIELD_UNCALIBRATED sensor.

If device implementations include a 3-axis magnetometer, an accelerometer sensor and a gyroscope sensor, they:

  • [C-2-1] MUST implement a TYPE_ROTATION_VECTOR composite sensor.

If device implementations include a 3-axis magnetometer, an accelerometer, they:

  • MAY implement the TYPE_GEOMAGNETIC_ROTATION_VECTOR sensor.

If device implementations include a 3-axis magnetometer, an accelerometer and TYPE_GEOMAGNETIC_ROTATION_VECTOR sensor, they:

  • [C-3-1] MUST consume less than 10 mW.
  • SHOULD consume less than 3 mW when the sensor is registered for batch mode at 10 Hz.

7.3.3. จีพีเอส

การใช้งานอุปกรณ์:

  • SHOULD include a GPS/GNSS receiver.

If device implementations include a GPS/GNSS receiver and report the capability to applications through the android.hardware.location.gps feature flag, they:

  • [C-1-1] MUST support location outputs at a rate of at least 1 Hz when requested via LocationManager#requestLocationUpdate .
  • [C-1-2] MUST be able to determine the location in open-sky conditions (strong signals, negligible multipath, HDOP < 2) within 10 seconds (fast time to first fix), when connected to a 0.5 Mbps or faster data speed internet connection. This requirement is typically met by the use of some form of Assisted or Predicted GPS/GNSS technique to minimize GPS/GNSS lock-on time (Assistance data includes Reference Time, Reference Location and Satellite Ephemeris/Clock).
    • [C-1-6] After making such a location calculation, device implementations MUST determine its location, in open sky, within 5 seconds, when location requests are restarted, up to an hour after the initial location calculation, even when the subsequent request is made without a data connection, and/or after a power cycle.
  • In open sky conditions after determining the location, while stationary or moving with less than 1 meter per second squared of acceleration:

    • [C-1-3] MUST be able to determine location within 20 meters, and speed within 0.5 meters per second, at least 95% of the time.
    • [C-1-4] MUST simultaneously track and report via GnssStatus.Callback at least 8 satellites from one constellation.
    • ควรจะสามารถติดตามดาวเทียมอย่างน้อย 24 ดวงพร้อมกันได้จากหลายกลุ่ม (เช่น GPS + อย่างน้อยหนึ่ง Glonass, Beidou, Galileo)
    • [C-1-5] MUST report the GNSS technology generation through the test API 'getGnssYearOfHardware'.
    • [SR] Continue to deliver normal GPS/GNSS location outputs during an emergency phone call.
    • [SR] Report GNSS measurements from all constellations tracked (as reported in GnssStatus messages), with the exception of SBAS.
    • [SR] Report AGC, and Frequency of GNSS measurement.
    • [SR] Report all accuracy estimates (including Bearing, Speed, and Vertical) as part of each GPS/GNSS location.
    • [SR] are STRONGLY RECOMMENDED to meet as many as possible from the additional mandatory requirements for devices reporting the year "2016" or "2017" through the Test API LocationManager.getGnssYearOfHardware() .

If device implementations include a GPS/GNSS receiver and report the capability to applications through the android.hardware.location.gps feature flag and the LocationManager.getGnssYearOfHardware() Test API reports the year "2016" or newer, they:

  • [C-2-1] MUST report GNSS measurements, as soon as they are found, even if a location calculated from GPS/GNSS is not yet reported.
  • [C-2-2] MUST report GNSS pseudoranges and pseudorange rates, that, in open-sky conditions after determining the location, while stationary or moving with less than 0.2 meter per second squared of acceleration, are sufficient to calculate position within 20 meters, and speed within 0.2 meters per second, at least 95% of the time.

If device implementations include a GPS/GNSS receiver and report the capability to applications through the android.hardware.location.gps feature flag and the LocationManager.getGnssYearOfHardware() Test API reports the year "2017" or newer, they:

  • [C-3-1] MUST continue to deliver normal GPS/GNSS location outputs during an emergency phone call.
  • [C-3-2] MUST report GNSS measurements from all constellations tracked (as reported in GnssStatus messages), with the exception of SBAS.
  • [C-3-3] MUST report AGC, and Frequency of GNSS measurement.
  • [C-3-4] MUST report all accuracy estimates (including Bearing, Speed, and Vertical) as part of each GPS/GNSS location.

If device implementations include a GPS/GNSS receiver and report the capability to applications through the android.hardware.location.gps feature flag and the LocationManager.getGnssYearOfHardware() Test API reports the year "2018" or newer, they:

  • [C-4-1] MUST continue to deliver normal GPS/GNSS outputs to applications during a Mobile Station Based (MS-Based) Network Initiated emergency session call.
  • [C-4-2] MUST report positions and measurements to the GNSS Location Provider API's.

7.3.4. ไจโรสโคป

การใช้งานอุปกรณ์:

  • SHOULD include a gyroscope (angular change sensor).
  • SHOULD NOT include a gyroscope sensor unless a 3-axis accelerometer is also included.

If device implementations include a gyroscope, they:

  • [C-1-1] MUST be able to report events up to a frequency of at least 50 Hz.
  • [C-1-2] MUST implement the TYPE_GYROSCOPE sensor and SHOULD also implement TYPE_GYROSCOPE_UNCALIBRATED sensor.
  • [C-1-3] MUST be capable of measuring orientation changes up to 1,000 degrees per second.
  • [C-1-4] MUST have a resolution of 12-bits or more and SHOULD have a resolution of 16-bits or more.
  • [C-1-5] MUST be temperature compensated.
  • [C-1-6] MUST be calibrated and compensated while in use, and preserve the compensation parameters between device reboots.
  • [C-1-7] MUST have a variance no greater than 1e-7 rad^2 / s^2 per Hz (variance per Hz, or rad^2 / s). The variance is allowed to vary with the sampling rate, but MUST be constrained by this value. In other words, if you measure the variance of the gyro at 1 Hz sampling rate it SHOULD be no greater than 1e-7 rad^2/s^2.
  • [SR] Existing and new Android devices are STRONGLY RECOMMENDED to implement the SENSOR_TYPE_GYROSCOPE_UNCALIBRATED sensor.
  • [SR] Calibration error is STRONGLY RECOMMENDED to be less than 0.01 rad/s when device is stationary at room temperature.
  • SHOULD report events up to at least 200 Hz.

If device implementations include a gyroscope, an accelerometer sensor and a magnetometer sensor, they:

  • [C-2-1] MUST implement a TYPE_ROTATION_VECTOR composite sensor.

If device implementations include a gyroscope and a accelerometer sensor, they:

  • [C-3-1] MUST implement the TYPE_GRAVITY and TYPE_LINEAR_ACCELERATION composite sensors.
  • [SR] Existing and new Android devices are STRONGLY RECOMMENDED to implement the TYPE_GAME_ROTATION_VECTOR sensor.
  • SHOULD implement the TYPE_GAME_ROTATION_VECTOR composite sensor.

7.3.5. บารอมิเตอร์

  • Device implementations SHOULD include a barometer (ambient air pressure sensor).

If device implementations include a barometer, they:

  • [C-1-1] MUST implement and report TYPE_PRESSURE sensor.
  • [C-1-2] MUST be able to deliver events at 5 Hz or greater.
  • [C-1-3] MUST be temperature compensated.
  • [SR] STRONGLY RECOMMENDED to be able to report pressure measurements in the range 300hPa to 1100hPa.
  • SHOULD have an absolute accuracy of 1hPa.
  • SHOULD have a relative accuracy of 0.12hPa over 20hPa range (equivalent to ~1m accuracy over ~200m change at sea level).

7.3.6. เทอร์โมมิเตอร์

Device implementations: * MAY include an ambient thermometer (temperature sensor). * MAY but SHOULD NOT include a CPU temperature sensor.

If device implementations include an ambient thermometer (temperature sensor), they:

  • [C-1-1] MUST be defined as SENSOR_TYPE_AMBIENT_TEMPERATURE and MUST measure the ambient (room/vehicle cabin) temperature from where the user is interacting with the device in degrees Celsius.
  • [C-1-2] MUST be defined as SENSOR_TYPE_TEMPERATURE .
  • [C-1-3] MUST measure the temperature of the device CPU.
  • [C-1-4] MUST NOT measure any other temperature.

Note the SENSOR_TYPE_TEMPERATURE sensor type was deprecated in Android 4.0.

7.3.7. โฟโตมิเตอร์

  • Device implementations MAY include a photometer (ambient light sensor).

7.3.8. พร็อกซิมิตี้เซนเซอร์

  • Device implementations MAY include a proximity sensor.

If device implementations include a proximity sensor, they:

  • [C-1-1] MUST measure the proximity of an object in the same direction as the screen. That is, the proximity sensor MUST be oriented to detect objects close to the screen, as the primary intent of this sensor type is to detect a phone in use by the user. If device implementations include a proximity sensor with any other orientation, it MUST NOT be accessible through this API.
  • [C-1-2] MUST have 1-bit of accuracy or more.

7.3.9. เซนเซอร์ความเที่ยงตรงสูง

If device implementations include a set of higher quality sensors as defined in this section, and make available them to third-party apps, they:

  • [C-1-1] MUST identify the capability through the android.hardware.sensor.hifi_sensors feature flag.

If device implementations declare android.hardware.sensor.hifi_sensors , they:

  • [C-2-1] MUST have a TYPE_ACCELEROMETER sensor which:

    • MUST have a measurement range between at least -8g and +8g, SHOULD have a measurement range between at least -16g and +16g.
    • MUST have a measurement resolution of at least 2048 LSB/g.
    • MUST have a minimum measurement frequency of 12.5 Hz or lower.
    • MUST have a maximum measurement frequency of 400 Hz or higher; SHOULD support the SensorDirectChannel RATE_VERY_FAST .
    • MUST have a measurement noise not above 400 μg/√Hz.
    • MUST implement a non-wake-up form of this sensor with a buffering capability of at least 3000 sensor events.
    • MUST have a batching power consumption not worse than 3 mW.
    • [C-SR] Is STRONGLY RECOMMENDED to have 3dB measurement bandwidth of at least 80% of Nyquist frequency, and white noise spectrum within this bandwidth.
    • SHOULD have an acceleration random walk less than 30 μg √Hz tested at room temperature.
    • SHOULD have a bias change vs. temperature of ≤ +/- 1 mg/°C.
    • SHOULD have a best-fit line non-linearity of ≤ 0.5%, and sensitivity change vs. temperature of ≤ 0.03%/C°.
    • SHOULD have cross-axis sensitivity of < 2.5 % and variation of cross-axis sensitivity < 0.2% in device operation temperature range.
  • [C-2-2] MUST have a TYPE_ACCELEROMETER_UNCALIBRATED with the same quality requirements as TYPE_ACCELEROMETER .

  • [C-2-3] MUST have a TYPE_GYROSCOPE sensor which:

    • MUST have a measurement range between at least -1000 and +1000 dps.
    • MUST have a measurement resolution of at least 16 LSB/dps.
    • MUST have a minimum measurement frequency of 12.5 Hz or lower.
    • MUST have a maximum measurement frequency of 400 Hz or higher; SHOULD support the SensorDirectChannel RATE_VERY_FAST .
    • MUST have a measurement noise not above 0.014°/s/√Hz.
    • [C-SR] Is STRONGLY RECOMMENDED to have 3dB measurement bandwidth of at least 80% of Nyquist frequency, and white noise spectrum within this bandwidth.
    • SHOULD have a rate random walk less than 0.001 °/s √Hz tested at room temperature.
    • SHOULD have a bias change vs. temperature of ≤ +/- 0.05 °/ s / °C.
    • SHOULD have a sensitivity change vs. temperature of ≤ 0.02% / °C.
    • SHOULD have a best-fit line non-linearity of ≤ 0.2%.
    • SHOULD have a noise density of ≤ 0.007 °/s/√Hz.
    • SHOULD have calibration error less than 0.002 rad/s in temperature range 10 ~ 40 ℃ when device is stationary.
    • SHOULD have g-sensitivity less than 0.1°/s/g.
    • SHOULD have cross-axis sensitivity of < 4.0 % and cross-axis sensitivity variation < 0.3% in device operation temperature range.
  • [C-2-4] MUST have a TYPE_GYROSCOPE_UNCALIBRATED with the same quality requirements as TYPE_GYROSCOPE .

  • [C-2-5] MUST have a TYPE_GEOMAGNETIC_FIELD sensor which:

    • MUST have a measurement range between at least -900 and +900 μT.
    • MUST have a measurement resolution of at least 5 LSB/uT.
    • MUST have a minimum measurement frequency of 5 Hz or lower.
    • MUST have a maximum measurement frequency of 50 Hz or higher.
    • MUST have a measurement noise not above 0.5 uT.
  • [C-2-6] MUST have a TYPE_MAGNETIC_FIELD_UNCALIBRATED with the same quality requirements as TYPE_GEOMAGNETIC_FIELD and in addition:

    • MUST implement a non-wake-up form of this sensor with a buffering capability of at least 600 sensor events.
    • [C-SR] Is STRONGLY RECOMMENDED to have white noise spectrum from 1 Hz to at least 10 Hz when the report rate is 50 Hz or higher.
  • [C-2-7] MUST have a TYPE_PRESSURE sensor which:

    • MUST have a measurement range between at least 300 and 1100 hPa.
    • MUST have a measurement resolution of at least 80 LSB/hPa.
    • MUST have a minimum measurement frequency of 1 Hz or lower.
    • MUST have a maximum measurement frequency of 10 Hz or higher.
    • MUST have a measurement noise not above 2 Pa/√Hz.
    • MUST implement a non-wake-up form of this sensor with a buffering capability of at least 300 sensor events.
    • MUST have a batching power consumption not worse than 2 mW.
  • [C-2-8] MUST have a TYPE_GAME_ROTATION_VECTOR sensor which:
    • MUST implement a non-wake-up form of this sensor with a buffering capability of at least 300 sensor events.
    • MUST have a batching power consumption not worse than 4 mW.
  • [C-2-9] MUST have a TYPE_SIGNIFICANT_MOTION sensor which:
    • MUST have a power consumption not worse than 0.5 mW when device is static and 1.5 mW when device is moving.
  • [C-2-10] MUST have a TYPE_STEP_DETECTOR sensor which:
    • MUST implement a non-wake-up form of this sensor with a buffering capability of at least 100 sensor events.
    • MUST have a power consumption not worse than 0.5 mW when device is static and 1.5 mW when device is moving.
    • MUST have a batching power consumption not worse than 4 mW.
  • [C-2-11] MUST have a TYPE_STEP_COUNTER sensor which:
    • MUST have a power consumption not worse than 0.5 mW when device is static and 1.5 mW when device is moving.
  • [C-2-12] MUST have a TILT_DETECTOR sensor which:
    • MUST have a power consumption not worse than 0.5 mW when device is static and 1.5 mW when device is moving.
  • [C-2-13] The event timestamp of the same physical event reported by the Accelerometer, Gyroscope, and Magnetometer MUST be within 2.5 milliseconds of each other. The event timestamp of the same physical event reported by the Accelerometer and Gyroscope SHOULD be within 0.25 milliseconds of each other.
  • [C-2-14] MUST have Gyroscope sensor event timestamps on the same time base as the camera subsystem and within 1 milliseconds of error.
  • [C-2-15] MUST deliver samples to applications within 5 milliseconds from the time when the data is available on any of the above physical sensors to the application.
  • [C-2-16] MUST NOT have a power consumption higher than 0.5 mW when device is static and 2.0 mW when device is moving when any combination of the following sensors are enabled:
    • SENSOR_TYPE_SIGNIFICANT_MOTION
    • SENSOR_TYPE_STEP_DETECTOR
    • SENSOR_TYPE_STEP_COUNTER
    • SENSOR_TILT_DETECTORS
  • [C-2-17] MAY have a TYPE_PROXIMITY sensor, but if present MUST have a minimum buffer capability of 100 sensor events.

Note that all power consumption requirements in this section do not include the power consumption of the Application Processor. It is inclusive of the power drawn by the entire sensor chain—the sensor, any supporting circuitry, any dedicated sensor processing system, etc.

If device implementations include direct sensor support, they:

  • [C-3-1] MUST correctly declare support of direct channel types and direct report rates level through the isDirectChannelTypeSupported and getHighestDirectReportRateLevel API.
  • [C-3-2] MUST support at least one of the two sensor direct channel types for all sensors that declare support for sensor direct channel.
  • SHOULD support event reporting through sensor direct channel for primary sensor (non-wakeup variant) of the following types:
    • TYPE_ACCELEROMETER
    • TYPE_ACCELEROMETER_UNCALIBRATED
    • TYPE_GYROSCOPE
    • TYPE_GYROSCOPE_UNCALIBRATED
    • TYPE_MAGNETIC_FIELD
    • TYPE_MAGNETIC_FIELD_UNCALIBRATED

7.3.10. เซ็นเซอร์ไบโอเมตริกซ์

7.3.10.1. เซ็นเซอร์ลายนิ้วมือ

If device implementations include a secure lock screen, they:

  • SHOULD include a fingerprint sensor.

If device implementations include a fingerprint sensor and make the sensor available to third-party apps, they:

  • [C-1-1] MUST declare support for the android.hardware.fingerprint feature.
  • [C-1-2] MUST fully implement the corresponding API as described in the Android SDK documentation.
  • [C-1-3] MUST have a false acceptance rate not higher than 0.002%.
  • [SR] Are STRONGLY RECOMMENDED to have a spoof and imposter acceptance rate not higher than 7%.
  • [C-1-4] MUST disclose that this mode may be less secure than a strong PIN, pattern, or password and clearly enumerate the risks of enabling it, if the spoof and imposter acceptance rates are higher than 7%.
  • [C-1-5] MUST rate limit attempts for at least 30 seconds after five false trials for fingerprint verification.
  • [C-1-6] MUST have a hardware-backed keystore implementation, and perform the fingerprint matching in a Trusted Execution Environment (TEE) or on a chip with a secure channel to the TEE.
  • [C-1-7] MUST have all identifiable fingerprint data encrypted and cryptographically authenticated such that they cannot be acquired, read or altered outside of the TEE, or a chip with a secure channel to the TEE as documented in the implementation guidelines on the Android Open Source Project site.
  • [C-1-8] MUST prevent adding a fingerprint without first establishing a chain of trust by having the user confirm existing or add a new device credential (PIN/pattern/password) that's secured by TEE; the Android Open Source Project implementation provides the mechanism in the framework to do so.
  • [C-1-9] MUST NOT enable 3rd-party applications to distinguish between individual fingerprints.
  • [C-1-10] MUST honor the DevicePolicyManager.KEYGUARD_DISABLE_FINGERPRINT flag.
  • [C-1-11] MUST, when upgraded from a version earlier than Android 6.0, have the fingerprint data securely migrated to meet the above requirements or removed.
  • [C-1-12] MUST completely remove all identifiable fingerprint data for a user when the user's account is removed (including via a factory reset).
  • [C-1-13] MUST not allow unencrypted access to identifiable fingerprint data or any data derived from it (such as embeddings) to the Application Processor.
  • [SR] Are STRONGLY RECOMMENDED to have a false rejection rate of less than 10%, as measured on the device.
  • [SR] Are STRONGLY RECOMMENDED to have a latency below 1 second, measured from when the fingerprint sensor is touched until the screen is unlocked, for one enrolled finger.
  • SHOULD use the Android Fingerprint icon provided in the Android Open Source Project.
7.3.10.2. Other Biometric Sensors

If device implementations include one or more non-fingerprint-based-biometric sensors and make them available to third-party apps they:

  • [C-1-1] MUST have a false acceptance rate not higher than 0.002%.
  • [C-SR] Are STRONGLY RECOMMENDED to have a spoof and imposter acceptance rate not higher than 7%.
  • [C-1-2] MUST disclose that this mode may be less secure than a strong PIN, pattern, or password and clearly enumerate the risks of enabling it, if the spoof and imposter acceptance rates are higher than 7%.
  • [C-1-3] MUST rate limit attempts for at least 30 seconds after five false trials for biometric verification - where a false trial is one with an adequate capture quality (ACQUIRED_GOOD) that does not match an enrolled biometric
  • [C-1-4] MUST have a hardware-backed keystore implementation, and perform the biometric matching in a TEE or on a chip with a secure channel to the TEE.
  • [C-1-5] MUST have all identifiable data encrypted and cryptographically authenticated such that they cannot be acquired, read or altered outside of the TEE, or a chip with a secure channel to the TEE as documented in the implementation guidelines on the Android Open Source Project site.
  • [C-1-6] MUST prevent adding new biometrics without first establishing a chain of trust by having the user confirm existing or add a new device credential (PIN/pattern/password) that's secured by TEE; the Android Open Source Project implementation provides the mechanism in the framework to do so.
  • [C-1-7] MUST NOT enable third-party applications to distinguish between biometric enrollments.
  • [C-1-8] MUST honor the individual flag for that biometric (ie: DevicePolicyManager.KEYGUARD_DISABLE_FINGERPRINT , DevicePolicymanager.KEYGUARD_DISABLE_FACE , or DevicePolicymanager.KEYGUARD_DISABLE_IRIS ).
  • [C-1-9] MUST completely remove all identifiable biometric data for a user when the user's account is removed (including via a factory reset).
  • [C-1-10] MUST not allow unencrypted access to identifiable biometric data or any data derived from it (such as embeddings) to the Application Processor outside the context of the TEE.
  • [C-SR] Are STRONGLY RECOMMENDED to have a false rejection rate of less than 10%, as measured on the device.
  • [C-SR] Are STRONGLY RECOMMENDED to have a latency below 1 second, measured from when the biometric is detected, until the screen is unlocked, for each enrolled biometric.

7.3.11. เซ็นเซอร์เฉพาะยานยนต์ Android

Automotive-specific sensors are defined in the android.car.CarSensorManager API .

7.3.11.1. เกียร์ปัจจุบัน

See Section 2.5.1 for device-specific requirements.

7.3.11.2. โหมดกลางวันกลางคืน

See Section 2.5.1 for device-specific requirements.

7.3.11.3. สถานะการขับขี่

This requirement is deprecated.

7.3.11.4. ความเร็วล้อ

See Section 2.5.1 for device-specific requirements.

7.3.11.5. เบรกจอดรถ

See Section 2.5.1 for device-specific requirements.

7.3.12. เซ็นเซอร์โพสท่า

การใช้งานอุปกรณ์:

  • MAY support pose sensor with 6 degrees of freedom.

If device implementations support pose sensor with 6 degrees of freedom, they:

  • [C-1-1] MUST implement and report TYPE_POSE_6DOF sensor.
  • [C-1-2] MUST be more accurate than the rotation vector alone.

7.4. การเชื่อมต่อข้อมูล

7.4.1. โทรศัพท์

“Telephony” as used by the Android APIs and this document refers specifically to hardware related to placing voice calls and sending SMS messages via a GSM or CDMA network. While these voice calls may or may not be packet-switched, they are for the purposes of Android considered independent of any data connectivity that may be implemented using the same network. In other words, the Android “telephony” functionality and APIs refer specifically to voice calls and SMS. For instance, device implementations that cannot place calls or send/receive SMS messages are not considered a telephony device, regardless of whether they use a cellular network for data connectivity.

  • Android MAY be used on devices that do not include telephony hardware. That is, Android is compatible with devices that are not phones.

If device implementations include GSM or CDMA telephony, they:

  • [C-1-1] MUST declare the android.hardware.telephony feature flag and other sub-feature flags according to the technology.
  • [C-1-2] MUST implement full support for the API for that technology.

If device implementations do not include telephony hardware, they:

  • [C-2-1] MUST implement the full APIs as no-ops.
7.4.1.1. ความเข้ากันได้ของการบล็อกหมายเลข

If device implementations report the android.hardware.telephony feature , they:

  • [C-1-1] MUST include number blocking support
  • [C-1-2] MUST fully implement BlockedNumberContract and the corresponding API as described in the SDK documentation.
  • [C-1-3] MUST block all calls and messages from a phone number in 'BlockedNumberProvider' without any interaction with apps. The only exception is when number blocking is temporarily lifted as described in the SDK documentation.
  • [C-1-4] MUST NOT write to the platform call log provider for a blocked call.
  • [C-1-5] MUST NOT write to the Telephony provider for a blocked message.
  • [C-1-6] MUST implement a blocked numbers management UI, which is opened with the intent returned by TelecomManager.createManageBlockedNumbersIntent() method.
  • [C-1-7] MUST NOT allow secondary users to view or edit the blocked numbers on the device as the Android platform assumes the primary user to have full control of the telephony services, a single instance, on the device. All blocking related UI MUST be hidden for secondary users and the blocked list MUST still be respected.
  • SHOULD migrate the blocked numbers into the provider when a device updates to Android 7.0.
7.4.1.2. Telecom API

If device implementations report android.hardware.telephony , they:

  • [C-1-1] MUST support the ConnectionService APIs described in the SDK .
  • [C-1-2] MUST display a new incoming call and provide user affordance to accept or reject the incoming call when the user is on an ongoing call that is made by a third-party app that does not support the hold feature specified via CAPABILITY_SUPPORT_HOLD .
  • [C-SR] Are STRONGLY RECOMMENDED to notify the user that answering an incoming call will drop an ongoing call.

    The AOSP implementation meets these requirements by a heads-up notification which indicates to the user that answering an incoming call will cause the other call to be dropped.

  • [C-SR] Are STRONGLY RECOMMENDED to preload the default dialer app that shows a call log entry and the name of a third-party app in its call log when the third-party app sets the EXTRA_LOG_SELF_MANAGED_CALLS extras key on its PhoneAccount to true .

  • [C-SR] Are STRONGLY RECOMMENDED to handle the audio headset's KEYCODE_MEDIA_PLAY_PAUSE and KEYCODE_HEADSETHOOK events for the android.telecom APIs as below:

7.4.2. IEEE 802.11 (ไวไฟ)

การใช้งานอุปกรณ์:

  • SHOULD include support for one or more forms of 802.11.

If device implementations include support for 802.11 and expose the functionality to a third-party application, they:

  • [C-1-1] MUST implement the corresponding Android API.
  • [C-1-2] MUST report the hardware feature flag android.hardware.wifi .
  • [C-1-3] MUST implement the multicast API as described in the SDK documentation.
  • [C-1-4] MUST support multicast DNS (mDNS) and MUST NOT filter mDNS packets (224.0.0.251) at any time of operation including:
    • Even when the screen is not in an active state.
    • For Android Television device implementations, even when in standby power states.
  • [C-1-5] MUST NOT treat the WifiManager.enableNetwork() API method call as a sufficient indication to switch the currently active Network that is used by default for application traffic and is returned by ConnectivityManager API methods such as getActiveNetwork and registerDefaultNetworkCallback . In other words, they MAY only disable the Internet access provided by any other network provider (eg mobile data) if they successfully validate that the Wi-Fi network is providing Internet access.
  • [C-SR] Are STRONGLY RECOMMENDED, when the ConnectivityManager.reportNetworkConnectivity() API method is called, to re-evaluate the Internet access on the Network and, once the evaluation determines that the current Network no longer provides Internet access, switch to any other available network (eg mobile data) that provides Internet access.
  • [C-SR] Are STRONGLY RECOMMENDED to randomize the source MAC address and sequence number of probe request frames, once at the beginning of each scan, while STA is disconnected.
    • Each group of probe request frames comprising one scan should use one consistent MAC address (SHOULD NOT randomize MAC address halfway through a scan).
    • Probe request sequence number should iterate as normal (sequentially) between the probe requests in a scan.
    • Probe request sequence number should randomize between the last probe request of a scan and the first probe request of the next scan.
  • [C-SR] Are STRONGLY RECOMMENDED, while STA is disconnected, to allow only the following elements in probe request frames:
    • SSID Parameter Set (0)
    • DS Parameter Set (3)

If device implementations support Wi-Fi and use Wi-Fi for location scanning, they:

7.4.2.1. Wi-Fi ตรง

การใช้งานอุปกรณ์:

  • SHOULD include support for Wi-Fi Direct (Wi-Fi peer-to-peer).

If device implementations include support for Wi-Fi Direct, they:

  • [C-1-1] MUST implement the corresponding Android API as described in the SDK documentation.
  • [C-1-2] MUST report the hardware feature android.hardware.wifi.direct .
  • [C-1-3] MUST support regular Wi-Fi operation.
  • [C-1-4] MUST support Wi-Fi and Wi-Fi Direct operations concurrently.

การใช้งานอุปกรณ์:

If device implementations include support for TDLS and TDLS is enabled by the WiFiManager API, they:

  • [C-1-1] MUST declare support for TDLS through WifiManager.isTdlsSupported .
  • SHOULD use TDLS only when it is possible AND beneficial.
  • SHOULD have some heuristic and NOT use TDLS when its performance might be worse than going through the Wi-Fi access point.
7.4.2.3. การรับรู้ Wi-Fi

การใช้งานอุปกรณ์:

If device implementations include support for Wi-Fi Aware and expose the functionality to third-party apps, then they:

  • [C-1-1] MUST implement the WifiAwareManager APIs as described in the SDK documentation .
  • [C-1-2] MUST declare the android.hardware.wifi.aware feature flag.
  • [C-1-3] MUST support Wi-Fi and Wi-Fi Aware operations concurrently.
  • [C-1-4] MUST randomize the Wi-Fi Aware management interface address at intervals no longer than 30 minutes and whenever Wi-Fi Aware is enabled.

If device implementations include support for Wi-Fi Aware and Wi-Fi Location as described in Section 7.4.2.5 and exposes these functionalities to third-party apps, then they:

7.4.2.4. Wi-Fi Passpoint

การใช้งานอุปกรณ์:

If device implementations include support for Wi-Fi Passpoint, they:

  • [C-1-1] MUST implement the Passpoint related WifiManager APIs as described in the SDK documentation .
  • [C-1-2] MUST support IEEE 802.11u standard, specifically related to Network Discovery and Selection, such as Generic Advertisement Service (GAS) and Access Network Query Protocol (ANQP).

Conversely if device implementations do not include support for Wi-Fi Passpoint:

  • [C-2-1] The implementation of the Passpoint related WifiManager APIs MUST throw an UnsupportedOperationException .
7.4.2.5. Wi-Fi Location (Wi-Fi Round Trip Time - RTT)

การใช้งานอุปกรณ์:

If device implementations include support for Wi-Fi Location and expose the functionality to third-party apps, then they:

  • [C-1-1] MUST implement the WifiRttManager APIs as described in the SDK documentation .
  • [C-1-2] MUST declare the android.hardware.wifi.rtt feature flag.
  • [C-1-3] MUST randomize the source MAC address for each RTT burst which is executed while the Wi-Fi interface on which the RTT is being executed is not associated to an Access Point.

7.4.3. บลูทู ธ

If device implementations support Bluetooth Audio profile, they:

  • SHOULD support Advanced Audio Codecs and Bluetooth Audio Codecs (eg LDAC).

If device implementations support HFP, A2DP and AVRCP, they:

  • SHOULD support at least 5 total connected devices.

If device implementations declare android.hardware.vr.high_performance feature, they:

  • [C-1-1] MUST support Bluetooth 4.2 and Bluetooth LE Data Length Extension.

Android includes support for Bluetooth and Bluetooth Low Energy .

If device implementations include support for Bluetooth and Bluetooth Low Energy, they:

  • [C-2-1] MUST declare the relevant platform features ( android.hardware.bluetooth and android.hardware.bluetooth_le respectively) and implement the platform APIs.
  • SHOULD implement relevant Bluetooth profiles such as A2DP, AVRCP, OBEX, HFP, etc. as appropriate for the device.

If device implementations include support for Bluetooth Low Energy, they:

  • [C-3-1] MUST declare the hardware feature android.hardware.bluetooth_le .
  • [C-3-2] MUST enable the GATT (generic attribute profile) based Bluetooth APIs as described in the SDK documentation and android.bluetooth .
  • [C-3-3] MUST report the correct value for BluetoothAdapter.isOffloadedFilteringSupported() to indicate whether the filtering logic for the ScanFilter API classes is implemented.
  • [C-3-4] MUST report the correct value for BluetoothAdapter.isMultipleAdvertisementSupported() to indicate whether Low Energy Advertising is supported.
  • SHOULD support offloading of the filtering logic to the bluetooth chipset when implementing the ScanFilter API .
  • SHOULD support offloading of the batched scanning to the bluetooth chipset.
  • SHOULD support multi advertisement with at least 4 slots.

  • [SR] STRONGLY RECOMMENDED to implement a Resolvable Private Address (RPA) timeout no longer than 15 minutes and rotate the address at timeout to protect user privacy.

If device implementations support Bluetooth LE and use Bluetooth LE for location scanning, they:

  • [C-4-1] MUST provide a user affordance to enable/disable the value read through the System API BluetoothAdapter.isBleScanAlwaysAvailable() .

7.4.4. การสื่อสารระยะใกล้

การใช้งานอุปกรณ์:

  • SHOULD include a transceiver and related hardware for Near-Field Communications (NFC).
  • [C-0-1] MUST implement android.nfc.NdefMessage and android.nfc.NdefRecord APIs even if they do not include support for NFC or declare the android.hardware.nfc feature as the classes represent a protocol-independent data representation format .

If device implementations include NFC hardware and plan to make it available to third-party apps, they:

  • [C-1-1] MUST report the android.hardware.nfc feature from the android.content.pm.PackageManager.hasSystemFeature() method .
  • MUST be capable of reading and writing NDEF messages via the following NFC standards as below:
  • [C-1-2] MUST be capable of acting as an NFC Forum reader/writer (as defined by the NFC Forum technical specification NFCForum-TS-DigitalProtocol-1.0) via the following NFC standards:
    • NfcA (ISO14443-3A)
    • NfcB (ISO14443-3B)
    • NfcF (JIS X 6319-4)
    • IsoDep (ISO 14443-4)
    • NFC Forum Tag Types 1, 2, 3, 4, 5 (defined by the NFC Forum)
  • [SR] STRONGLY RECOMMENDED to be capable of reading and writing NDEF messages as well as raw data via the following NFC standards. Note that while the NFC standards are stated as STRONGLY RECOMMENDED, the Compatibility Definition for a future version is planned to change these to MUST. These standards are optional in this version but will be required in future versions. Existing and new devices that run this version of Android are very strongly encouraged to meet these requirements now so they will be able to upgrade to the future platform releases.

  • [C-1-3] MUST be capable of transmitting and receiving data via the following peer-to-peer standards and protocols:

    • ISO 18092
    • LLCP 1.2 (defined by the NFC Forum)
    • SDP 1.0 (defined by the NFC Forum)
    • NDEF Push Protocol
    • SNEP 1.0 (defined by the NFC Forum)
  • [C-1-4] MUST include support for Android Beam and SHOULD enable Android Beam by default.
  • [C-1-5] MUST be able to send and receive using Android Beam, when Android Beam is enabled or another proprietary NFC P2p mode is turned on.
  • [C-1-6] MUST implement the SNEP default server. Valid NDEF messages received by the default SNEP server MUST be dispatched to applications using the android.nfc.ACTION_NDEF_DISCOVERED intent. Disabling Android Beam in settings MUST NOT disable dispatch of incoming NDEF message.
  • [C-1-7] MUST honor the android.settings.NFCSHARING_SETTINGS intent to show NFC sharing settings .
  • [C-1-8] MUST implement the NPP server. Messages received by the NPP server MUST be processed the same way as the SNEP default server.
  • [C-1-9] MUST implement a SNEP client and attempt to send outbound P2P NDEF to the default SNEP server when Android Beam is enabled. If no default SNEP server is found then the client MUST attempt to send to an NPP server.
  • [C-1-10] MUST allow foreground activities to set the outbound P2P NDEF message using android.nfc.NfcAdapter.setNdefPushMessage , and android.nfc.NfcAdapter.setNdefPushMessageCallback , and android.nfc.NfcAdapter.enableForegroundNdefPush .
  • SHOULD use a gesture or on-screen confirmation, such as 'Touch to Beam', before sending outbound P2P NDEF messages.
  • [C-1-11] MUST support NFC Connection handover to Bluetooth when the device supports Bluetooth Object Push Profile.
  • [C-1-12] MUST support connection handover to Bluetooth when using android.nfc.NfcAdapter.setBeamPushUris , by implementing the “ Connection Handover version 1.2 ” and “ Bluetooth Secure Simple Pairing Using NFC version 1.0 ” specs from the NFC Forum. Such an implementation MUST implement the handover LLCP service with service name “urn:nfc:sn:handover” for exchanging the handover request/select records over NFC, and it MUST use the Bluetooth Object Push Profile for the actual Bluetooth data transfer. For legacy reasons (to remain compatible with Android 4.1 devices), the implementation SHOULD still accept SNEP GET requests for exchanging the handover request/select records over NFC. However an implementation itself SHOULD NOT send SNEP GET requests for performing connection handover.
  • [C-1-13] MUST poll for all supported technologies while in NFC discovery mode.
  • SHOULD be in NFC discovery mode while the device is awake with the screen active and the lock-screen unlocked.
  • SHOULD be capable of reading the barcode and URL (if encoded) of Thinfilm NFC Barcode products.

Note that publicly available links are not available for the JIS, ISO, and NFC Forum specifications cited above.

Android includes support for NFC Host Card Emulation (HCE) mode.

If device implementations include an NFC controller chipset capable of HCE (for NfcA and/or NfcB) and support Application ID (AID) routing, they:

  • [C-2-1] MUST report the android.hardware.nfc.hce feature constant.
  • [C-2-2] MUST support NFC HCE APIs as defined in the Android SDK.

If device implementations include an NFC controller chipset capable of HCE for NfcF, and implement the feature for third-party applications, they:

  • [C-3-1] MUST report the android.hardware.nfc.hcef feature constant.
  • [C-3-2] MUST implement the NfcF Card Emulation APIs as defined in the Android SDK.

If device implementations include general NFC support as described in this section and support MIFARE technologies (MIFARE Classic, MIFARE Ultralight, NDEF on MIFARE Classic) in the reader/writer role, they:

  • [C-4-1] MUST implement the corresponding Android APIs as documented by the Android SDK.
  • [C-4-2] MUST report the feature com.nxp.mifare from the android.content.pm.PackageManager.hasSystemFeature () method. Note that this is not a standard Android feature and as such does not appear as a constant in the android.content.pm.PackageManager class.

7.4.5. ความสามารถเครือข่ายขั้นต่ำ

การใช้งานอุปกรณ์:

  • [C-0-1] MUST include support for one or more forms of data networking. Specifically, device implementations MUST include support for at least one data standard capable of 200 Kbit/sec or greater. Examples of technologies that satisfy this requirement include EDGE, HSPA, EV-DO, 802.11g, Ethernet and Bluetooth PAN.
  • SHOULD also include support for at least one common wireless data standard, such as 802.11 (Wi-Fi), when a physical networking standard (such as Ethernet) is the primary data connection.
  • MAY implement more than one form of data connectivity.
  • [C-0-2] MUST include an IPv6 networking stack and support IPv6 communication using the managed APIs, such as java.net.Socket and java.net.URLConnection , as well as the native APIs, such as AF_INET6 sockets.
  • [C-0-3] MUST enable IPv6 by default.
  • MUST ensure that IPv6 communication is as reliable as IPv4, for example:
    • [C-0-4] MUST maintain IPv6 connectivity in doze mode.
    • [C-0-5] Rate-limiting MUST NOT cause the device to lose IPv6 connectivity on any IPv6-compliant network that uses RA lifetimes of at least 180 seconds.
  • [C-0-6] MUST provide third-party applications with direct IPv6 connectivity to the network when connected to an IPv6 network, without any form of address or port translation happening locally on the device. Both managed APIs such as Socket#getLocalAddress or Socket#getLocalPort ) and NDK APIs such as getsockname() or IPV6_PKTINFO MUST return the IP address and port that is actually used to send and receive packets on the network.

The required level of IPv6 support depends on the network type, as shown in the following requirements.

If device implementations support Wi-Fi, they:

  • [C-1-1] MUST support dual-stack and IPv6-only operation on Wi-Fi.

If device implementations support Ethernet, they:

  • [C-2-1] MUST support dual-stack operation on Ethernet.

If device implementations support Cellular data, they:

  • SHOULD support IPv6 operation (IPv6-only and possibly dual-stack) on cellular.

If device implementations support more than one network type (eg, Wi-Fi and cellular data), they:

  • [C-3-1] MUST simultaneously meet the above requirements on each network when the device is simultaneously connected to more than one network type.

7.4.6. การตั้งค่าการซิงค์

การใช้งานอุปกรณ์:

7.4.7. โปรแกรมประหยัดข้อมูล

If device implementations include a metered connection, they are:

  • [SR] STRONGLY RECOMMENDED to provide the data saver mode.

If device implementations provide the data saver mode, they:

If device implementations do not provide the data saver mode, they:

  • [C-2-1] MUST return the value RESTRICT_BACKGROUND_STATUS_DISABLED for ConnectivityManager.getRestrictBackgroundStatus()
  • [C-2-2] MUST NOT broadcast ConnectivityManager.ACTION_RESTRICT_BACKGROUND_CHANGED .
  • [C-2-3] MUST have an activity that handles the Settings.ACTION_IGNORE_BACKGROUND_DATA_RESTRICTIONS_SETTINGS intent but MAY implement it as a no-op.

7.4.8. องค์ประกอบที่ปลอดภัย

If device implementations support Open Mobile API capable secure elements and make them available to 3rd-party apps, they:

7.5. กล้อง

If device implementations include at least one camera, they:

  • [C-1-1] MUST declare the android.hardware.camera.any feature flag.
  • [C-1-2] MUST be possible for an application to simultaneously allocate 3 RGBA_8888 bitmaps equal to the size of the images produced by the largest-resolution camera sensor on the device, while camera is open for the purpose of basic preview and still การจับกุม.

7.5.1. กล้องมองหลัง

A rear-facing camera is a camera located on the side of the device opposite the display; that is, it images scenes on the far side of the device, like a traditional camera.

การใช้งานอุปกรณ์:

  • SHOULD include a rear-facing camera.

If device implementations include at least one rear-facing camera, they:

  • [C-1-1] MUST report the feature flag android.hardware.camera and android.hardware.camera.any .
  • [C-1-2] MUST have a resolution of at least 2 megapixels.
  • SHOULD have either hardware auto-focus or software auto-focus implemented in the camera driver (transparent to application software).
  • MAY have fixed-focus or EDOF (extended depth of field) hardware.
  • MAY include a flash.

If the camera includes a flash:

  • [C-2-1] the flash lamp MUST NOT be lit while an android.hardware.Camera.PreviewCallback instance has been registered on a Camera preview surface, unless the application has explicitly enabled the flash by enabling the FLASH_MODE_AUTO or FLASH_MODE_ON attributes of a Camera.Parameters object. Note that this constraint does not apply to the device's built-in system camera application, but only to third-party applications using Camera.PreviewCallback .

7.5.2. กล้องหน้า

A front-facing camera is a camera located on the same side of the device as the display; that is, a camera typically used to image the user, such as for video conferencing and similar applications.

การใช้งานอุปกรณ์:

  • MAY include a front-facing camera.

If device implementations include at least one front-facing camera, they:

  • [C-1-1] MUST report the feature flag android.hardware.camera.any and android.hardware.camera.front .
  • [C-1-2] MUST have a resolution of at least VGA (640x480 pixels).
  • [C-1-3] MUST NOT use a front-facing camera as the default for the Camera API and MUST NOT configure the API to treat a front-facing camera as the default rear-facing camera, even if it is the only camera บนอุปกรณ์
  • [C-1-4] The camera preview MUST be mirrored horizontally relative to the orientation specified by the application when the current application has explicitly requested that the Camera display be rotated via a call to the android.hardware.Camera.setDisplayOrientation() method . Conversely, the preview MUST be mirrored along the device's default horizontal axis when the current application does not explicitly request that the Camera display be rotated via a call to the android.hardware.Camera.setDisplayOrientation() method.
  • [C-1-5] MUST NOT mirror the final captured still image or video streams returned to application callbacks or committed to media storage.
  • [C-1-6] MUST mirror the image displayed by the postview in the same manner as the camera preview image stream.
  • MAY include features (such as auto-focus, flash, etc.) available to rear-facing cameras as described in section 7.5.1 .

If device implementations are capable of being rotated by user (such as automatically via an accelerometer or manually via user input):

  • [C-2-1] The camera preview MUST be mirrored horizontally relative to the device's current orientation.

7.5.3. กล้องภายนอก

การใช้งานอุปกรณ์:

  • MAY include support for an external camera that is not necessarily always connected.

If device implementations include support for an external camera, they:

  • [C-1-1] MUST declare the platform feature flag android.hardware.camera.external and android.hardware camera.any .
  • [C-1-2] MUST support USB Video Class (UVC 1.0 or higher) if the external camera connects through the USB host port.
  • [C-1-3] MUST pass camera CTS tests with a physical external camera device connected. Details of camera CTS testing are available at source.android.com .
  • SHOULD support video compressions such as MJPEG to enable transfer of high-quality unencoded streams (ie raw or independently compressed picture streams).
  • MAY support multiple cameras.
  • MAY support camera-based video encoding.

If camera-based video encoding is supported:

  • [C-2-1] A simultaneous unencoded / MJPEG stream (QVGA or greater resolution) MUST be accessible to the device implementation.

7.5.4. พฤติกรรม API ของกล้อง

Android includes two API packages to access the camera, the newer android.hardware.camera2 API expose lower-level camera control to the app, including efficient zero-copy burst/streaming flows and per-frame controls of exposure, gain, white balance gains, color conversion, denoising, sharpening, and more.

The older API package, android.hardware.Camera , is marked as deprecated in Android 5.0 but as it should still be available for apps to use. Android device implementations MUST ensure the continued support of the API as described in this section and in the Android SDK.

All features that are common between the deprecated android.hardware.Camera class and the newer android.hardware.camera2 package MUST have equivalent performance and quality in both APIs. For example, with equivalent settings, autofocus speed and accuracy must be identical, and the quality of captured images must be the same. Features that depend on the different semantics of the two APIs are not required to have matching speed or quality, but SHOULD match as closely as possible.

Device implementations MUST implement the following behaviors for the camera-related APIs, for all available cameras. การใช้งานอุปกรณ์:

  • [C-0-1] MUST use android.hardware.PixelFormat.YCbCr_420_SP for preview data provided to application callbacks when an application has never called android.hardware.Camera.Parameters.setPreviewFormat(int) .
  • [C-0-2] MUST further be in the NV21 encoding format when an application registers an android.hardware.Camera.PreviewCallback instance and the system calls the onPreviewFrame() method and the preview format is YCbCr_420_SP, the data in the byte[] passed into onPreviewFrame() . That is, NV21 MUST be the default.
  • [C-0-3] MUST support the YV12 format (as denoted by the android.graphics.ImageFormat.YV12 constant) for camera previews for both front- and rear-facing cameras for android.hardware.Camera . (The hardware video encoder and camera may use any native pixel format, but the device implementation MUST support conversion to YV12.)
  • [C-0-4] MUST support the android.hardware.ImageFormat.YUV_420_888 and android.hardware.ImageFormat.JPEG formats as outputs through the android.media.ImageReader API for android.hardware.camera2 devices that advertise REQUEST_AVAILABLE_CAPABILITIES_BACKWARD_COMPATIBLE capability in android.request.availableCapabilities .
  • [C-0-5] MUST still implement the full Camera API included in the Android SDK documentation, regardless of whether the device includes hardware autofocus or other capabilities. For instance, cameras that lack autofocus MUST still call any registered android.hardware.Camera.AutoFocusCallback instances (even though this has no relevance to a non-autofocus camera.) Note that this does apply to front-facing cameras; for instance, even though most front-facing cameras do not support autofocus, the API callbacks must still be “faked” as described.
  • [C-0-6] MUST recognize and honor each parameter name defined as a constant on the android.hardware.Camera.Parameters class. Conversely, device implementations MUST NOT honor or recognize string constants passed to the android.hardware.Camera.setParameters() method other than those documented as constants on the android.hardware.Camera.Parameters . That is, device implementations MUST support all standard Camera parameters if the hardware allows, and MUST NOT support custom Camera parameter types. For instance, device implementations that support image capture using high dynamic range (HDR) imaging techniques MUST support camera parameter Camera.SCENE_MODE_HDR .
  • [C-0-7] MUST report the proper level of support with the android.info.supportedHardwareLevel property as described in the Android SDK and report the appropriate framework feature flags .
  • [C-0-8] MUST also declare its individual camera capabilities of android.hardware.camera2 via the android.request.availableCapabilities property and declare the appropriate feature flags ; MUST define the feature flag if any of its attached camera devices supports the feature.
  • [C-0-9] MUST broadcast the Camera.ACTION_NEW_PICTURE intent whenever a new picture is taken by the camera and the entry of the picture has been added to the media store.
  • [C-0-10] MUST broadcast the Camera.ACTION_NEW_VIDEO intent whenever a new video is recorded by the camera and the entry of the picture has been added to the media store.
  • [C-SR] Are STRONGLY RECOMMENDED to support a logical camera device that lists capability CameraMetadata.REQUEST_AVAILABLE_CAPABILITIES_LOGICAL_MULTI_CAMERA , for devices with multiple cameras facing the same direction, consisting of each physical camera facing that direction, as long as the physical camera type is supported by the framework and CameraCharacteristics.INFO_SUPPORTED_HARDWARE_LEVEL for the physical cameras is either LIMITED , FULL , or LEVEL_3 .

7.5.5. การวางแนวกล้อง

If device implementations have a front- or a rear-facing camera, such camera(s):

  • [C-1-1] MUST be oriented so that the long dimension of the camera aligns with the screen's long dimension. That is, when the device is held in the landscape orientation, cameras MUST capture images in the landscape orientation. This applies regardless of the device's natural orientation; that is, it applies to landscape-primary devices as well as portrait-primary devices.

7.6. หน่วยความจำและการจัดเก็บ

7.6.1. หน่วยความจำและพื้นที่เก็บข้อมูลขั้นต่ำ

การใช้งานอุปกรณ์:

  • [C-0-1] MUST include a Download Manager that applications MAY use to download data files and they MUST be capable of downloading individual files of at least 100MB in size to the default “cache” location.

7.6.2. พื้นที่เก็บข้อมูลที่ใช้ร่วมกันของแอปพลิเคชัน

การใช้งานอุปกรณ์:

  • [C-0-1] MUST offer storage to be shared by applications, also often referred as “shared external storage”, "application shared storage" or by the Linux path "/sdcard" it is mounted on.
  • [C-0-2] MUST be configured with shared storage mounted by default, in other words “out of the box”, regardless of whether the storage is implemented on an internal storage component or a removable storage medium (eg Secure Digital card slot ).
  • [C-0-3] MUST mount the application shared storage directly on the Linux path sdcard or include a Linux symbolic link from sdcard to the actual mount point.
  • [C-0-4] MUST enforce the android.permission.WRITE_EXTERNAL_STORAGE permission on this shared storage as documented in the SDK. Shared storage MUST otherwise be writable by any application that obtains that permission.

Device implementations MAY meet the above requirements using either of the following:

  • User-accessible removable storage, such as a Secure Digital (SD) card slot.
  • A portion of the internal (non-removable) storage as implemented in the Android Open Source Project (AOSP).

If device implementations use removable storage to satisfy the above requirements, they:

  • [C-1-1] MUST implement a toast or pop-up user interface warning the user when there is no storage medium inserted in the slot.
  • [C-1-2] MUST include a FAT-formatted storage medium (eg SD card) or show on the box and other material available at time of purchase that the storage medium has to be purchased separately.

If device implementations use a portion of the non-removable storage to satisfy the above requirements, they:

  • SHOULD use the AOSP implementation of the internal application shared storage.
  • MAY share the storage space with the application private data.

If device implementations include multiple shared storage paths (such as both an SD card slot and shared internal storage), they:

  • [C-2-1] MUST allow only preinstalled and privileged Android applications with the WRITE_EXTERNAL_STORAGE permission to write to the secondary external storage, except when writing to their package-specific directories or within the URI returned by firing the ACTION_OPEN_DOCUMENT_TREE intent.

If device implementations have a USB port with USB peripheral mode support, they:

  • [C-3-1] MUST provide a mechanism to access the data on the application shared storage from a host computer.
  • SHOULD expose content from both storage paths transparently through Android's media scanner service and android.provider.MediaStore .
  • MAY use USB mass storage, but SHOULD use Media Transfer Protocol to satisfy this requirement.

If device implementations have a USB port with USB peripheral mode and support Media Transfer Protocol, they:

  • SHOULD be compatible with the reference Android MTP host, Android File Transfer .
  • SHOULD report a USB device class of 0x00.
  • SHOULD report a USB interface name of 'MTP'.

7.6.3. พื้นที่เก็บข้อมูลที่ปรับใช้ได้

If the device is expected to be mobile in nature unlike Television, device implementations are:

  • [SR] STRONGLY RECOMMENDED to implement the adoptable storage in a long-term stable location, since accidentally disconnecting them can cause data loss/corruption.

If the removable storage device port is in a long-term stable location, such as within the battery compartment or other protective cover, device implementations are:

7.7. ยูเอสบี

If device implementations have a USB port, they:

  • SHOULD support USB peripheral mode and SHOULD support USB host mode.

7.7.1. โหมดอุปกรณ์ต่อพ่วง USB

If device implementations include a USB port supporting peripheral mode:

  • [C-1-1] The port MUST be connectable to a USB host that has a standard type-A or type-C USB port.
  • [C-1-2] MUST report the correct value of iSerialNumber in USB standard device descriptor through android.os.Build.SERIAL .
  • [C-1-3] MUST detect 1.5A and 3.0A chargers per the Type-C resistor standard and MUST detect changes in the advertisement if they support Type-C USB.
  • [SR] The port SHOULD use micro-B, micro-AB or Type-C USB form factor. Existing and new Android devices are STRONGLY RECOMMENDED to meet these requirements so they will be able to upgrade to the future platform releases.
  • [SR] The port SHOULD be located on the bottom of the device (according to natural orientation) or enable software screen rotation for all apps (including home screen), so that the display draws correctly when the device is oriented with the port at bottom . Existing and new Android devices are STRONGLY RECOMMENDED to meet these requirements so they will be able to upgrade to future platform releases.
  • [SR] SHOULD implement support to draw 1.5 A current during HS chirp and traffic as specified in the USB Battery Charging specification, revision 1.2 . Existing and new Android devices are STRONGLY RECOMMENDED to meet these requirements so they will be able to upgrade to the future platform releases.
  • [SR] STRONGLY RECOMMENDED to not support proprietary charging methods that modify Vbus voltage beyond default levels, or alter sink/source roles as such may result in interoperability issues with the chargers or devices that support the standard USB Power Delivery methods. While this is called out as "STRONGLY RECOMMENDED", in future Android versions we might REQUIRE all type-C devices to support full interoperability with standard type-C chargers.
  • [SR] STRONGLY RECOMMENDED to support Power Delivery for data and power role swapping when they support Type-C USB and USB host mode.
  • SHOULD support Power Delivery for high-voltage charging and support for Alternate Modes such as display out.
  • SHOULD implement the Android Open Accessory (AOA) API and specification as documented in the Android SDK documentation.

If device implementations include a USB port and implement the AOA specification, they:

  • [C-2-1] MUST declare support for the hardware feature android.hardware.usb.accessory .
  • [C-2-2] The USB mass storage class MUST include the string "android" at the end of the interface description iInterface string of the USB mass storage
  • SHOULD NOT implement AOAv2 audio documented in the Android Open Accessory Protocol 2.0 documentation. AOAv2 audio is deprecated as of Android version 8.0 (API level 26).

7.7.2. โหมดโฮสต์ USB

If device implementations include a USB port supporting host mode, they:

  • [C-1-1] MUST implement the Android USB host API as documented in the Android SDK and MUST declare support for the hardware feature android.hardware.usb.host .
  • [C-1-2] MUST implement support to connect standard USB peripherals, in other words, they MUST either:
    • Have an on-device type C port or ship with cable(s) adapting an on-device proprietary port to a standard USB type-C port (USB Type-C device).
    • Have an on-device type A or ship with cable(s) adapting an on-device proprietary port to a standard USB type-A port.
    • Have an on-device micro-AB port, which SHOULD ship with a cable adapting to a standard type-A port.
  • [C-1-3] MUST NOT ship with an adapter converting from USB type A or micro-AB ports to a type-C port (receptacle).
  • [SR] STRONGLY RECOMMENDED to implement the USB audio class as documented in the Android SDK documentation.
  • SHOULD support charging the connected USB peripheral device while in host mode; advertising a source current of at least 1.5A as specified in the Termination Parameters section of the USB Type-C Cable and Connector Specification Revision 1.2 for USB Type-C connectors or using Charging Downstream Port(CDP) output current range as specified in the USB Battery Charging specifications, revision 1.2 for Micro-AB connectors.
  • SHOULD implement and support USB Type-C standards.

If device implementations include a USB port supporting host mode and the USB audio class, they:

  • [C-2-1] MUST support the USB HID class .
  • [C-2-2] MUST support the detection and mapping of the following HID data fields specified in the USB HID Usage Tables and the Voice Command Usage Request to the KeyEvent constants as below:
    • Usage Page (0xC) Usage ID (0x0CD): KEYCODE_MEDIA_PLAY_PAUSE
    • Usage Page (0xC) Usage ID (0x0E9): KEYCODE_VOLUME_UP
    • Usage Page (0xC) Usage ID (0x0EA): KEYCODE_VOLUME_DOWN
    • Usage Page (0xC) Usage ID (0x0CF): KEYCODE_VOICE_ASSIST

If device implementations include a USB port supporting host mode and the Storage Access Framework (SAF), they:

  • [C-3-1] MUST recognize any remotely connected MTP (Media Transfer Protocol) devices and make their contents accessible through the ACTION_GET_CONTENT , ACTION_OPEN_DOCUMENT , and ACTION_CREATE_DOCUMENT intents. .

If device implementations include a USB port supporting host mode and USB Type-C, they:

  • [C-4-1] MUST implement Dual Role Port functionality as defined by the USB Type-C specification (section 4.5.1.3.3).
  • [SR] STRONGLY RECOMMENDED to support DisplayPort, SHOULD support USB SuperSpeed Data Rates, and are STRONGLY RECOMMENDED to support Power Delivery for data and power role swapping.
  • [SR] STRONGLY RECOMMENDED to NOT support Audio Adapter Accessory Mode as described in the Appendix A of the USB Type-C Cable and Connector Specification Revision 1.2 .
  • SHOULD implement the Try.* model that is most appropriate for the device form factor. For example a handheld device SHOULD implement the Try.SNK model.

7.8. เสียง

7.8.1. ไมโครโฟน

If device implementations include a microphone, they:

  • [C-1-1] MUST report the android.hardware.microphone feature constant.
  • [C-1-2] MUST meet the audio recording requirements in section 5.4 .
  • [C-1-3] MUST meet the audio latency requirements in section 5.6 .
  • [SR] Are STRONGLY RECOMMENDED to support near-ultrasound recording as described in section 7.8.3 .

If device implementations omit a microphone, they:

  • [C-2-1] MUST NOT report the android.hardware.microphone feature constant.
  • [C-2-2] MUST implement the audio recording API at least as no-ops, per section 7 .

7.8.2. เอาต์พุตเสียง

If device implementations include a speaker or an audio/multimedia output port for an audio output peripheral such as a 4 conductor 3.5mm audio jack or USB host mode port using USB audio class , they:

  • [C-1-1] MUST report the android.hardware.audio.output feature constant.
  • [C-1-2] MUST meet the audio playback requirements in section 5.5 .
  • [C-1-3] MUST meet the audio latency requirements in section 5.6 .
  • [SR] STRONGLY RECOMMENDED to support near-ultrasound playback as described in section 7.8.3 .

If device implementations do not include a speaker or audio output port, they:

  • [C-2-1] MUST NOT report the android.hardware.audio.output feature.
  • [C-2-2] MUST implement the Audio Output related APIs as no-ops at least.

For the purposes of this section, an "output port" is a physical interface such as a 3.5mm audio jack, HDMI, or USB host mode port with USB audio class. Support for audio output over radio-based protocols such as Bluetooth, WiFi, or cellular network does not qualify as including an "output port".

7.8.2.1. พอร์ตเสียงอนาล็อก

In order to be compatible with the headsets and other audio accessories using the 3.5mm audio plug across the Android ecosystem, if device implementations include one or more analog audio ports, they:

  • [C-SR] Are STRONGLY RECOMMENDED to include at least one of the audio port(s) to be a 4 conductor 3.5mm audio jack.

If device implementations have a 4 conductor 3.5mm audio jack, they:

  • [C-1-1] MUST support audio playback to stereo headphones and stereo headsets with a microphone.
  • [C-1-2] MUST support TRRS audio plugs with the CTIA pin-out order.
  • [C-1-3] MUST support the detection and mapping to the keycodes for the following 3 ranges of equivalent impedance between the microphone and ground conductors on the audio plug:
    • 70 ohm or less : KEYCODE_HEADSETHOOK
    • 210-290 ohm : KEYCODE_VOLUME_UP
    • 360-680 ohm : KEYCODE_VOLUME_DOWN
  • [C-1-4] MUST trigger ACTION_HEADSET_PLUG upon a plug insert, but only after all contacts on plug are touching their relevant segments on the jack.
  • [C-1-5] MUST be capable of driving at least 150mV ± 10% of output voltage on a 32 ohm speaker impedance.
  • [C-1-6] MUST have a microphone bias voltage between 1.8V ~ 2.9V.
  • [C-1-7] MUST detect and map to the keycode for the following range of equivalent impedance between the microphone and ground conductors on the audio plug:
    • 110-180 ohm: KEYCODE_VOICE_ASSIST
  • [C-SR] Are STRONGLY RECOMMENDED to support audio plugs with the OMTP pin-out order.
  • [C-SR] Are STRONGLY RECOMMEND to support audio recording from stereo headsets with a microphone.

If device implementations have a 4 conductor 3.5mm audio jack and support a microphone, and broadcast the android.intent.action.HEADSET_PLUG with the extra value microphone set as 1, they:

  • [C-2-1] MUST support the detection of microphone on the plugged in audio accessory.

7.8.3. ใกล้อัลตราซาวนด์

Near-Ultrasound audio is the 18.5 kHz to 20 kHz band.

การใช้งานอุปกรณ์:

If PROPERTY_SUPPORT_MIC_NEAR_ULTRASOUND is "true", the following requirements MUST be met by the VOICE_RECOGNITION and UNPROCESSED audio sources:

  • [C-1-1] The microphone's mean power response in the 18.5 kHz to 20 kHz band MUST be no more than 15 dB below the response at 2 kHz.
  • [C-1-2] The microphone's unweighted signal to noise ratio over 18.5 kHz to 20 kHz for a 19 kHz tone at -26 dBFS MUST be no lower than 50 dB.

If PROPERTY_SUPPORT_SPEAKER_NEAR_ULTRASOUND is "true":

  • [C-2-1] The speaker's mean response in 18.5 kHz - 20 kHz MUST be no lower than 40 dB below the response at 2 kHz.

7.9. ความจริงเสมือน

Android includes APIs and facilities to build "Virtual Reality" (VR) applications including high quality mobile VR experiences. Device implementations MUST properly implement these APIs and behaviors, as detailed in this section.

7.9.1. โหมดความเป็นจริงเสมือน

Android includes support for VR Mode , a feature which handles stereoscopic rendering of notifications and disables monocular system UI components while a VR application has user focus.

7.9.2. Virtual Reality Mode - High Performance

If device implementations support VR mode, they:

  • [C-1-1] MUST have at least 2 physical cores.
  • [C-1-2] MUST declare the android.hardware.vr.high_performance feature.
  • [C-1-3] MUST support sustained performance mode.
  • [C-1-4] MUST support OpenGL ES 3.2.
  • [C-1-5] MUST support android.hardware.vulkan.level 0.
  • SHOULD support android.hardware.vulkan.level 1 or higher.
  • [C-1-6] MUST implement EGL_KHR_mutable_render_buffer , EGL_ANDROID_front_buffer_auto_refresh , EGL_ANDROID_get_native_client_buffer , EGL_KHR_fence_sync , EGL_KHR_wait_sync , EGL_IMG_context_priority , EGL_EXT_protected_content , EGL_EXT_image_gl_colorspace , and expose the extensions in the list of available EGL extensions.
  • [C-1-8] MUST implement GL_EXT_multisampled_render_to_texture2 , GL_OVR_multiview , GL_OVR_multiview2 , GL_OVR_multiview_multisampled_render_to_texture , GL_EXT_protected_textures , and expose the extensions in the list of available GL extensions.
  • [C-SR] Are STRONGLY RECOMMENDED to implement GL_EXT_external_buffer , GL_EXT_EGL_image_array , and expose the extensions in the list of available GL extensions.
  • [C-SR] Are STRONGLY RECOMMENDED to support Vulkan 1.1.
  • [C-SR] Are STRONGLY RECOMMENDED to implement VK_ANDROID_external_memory_android_hardware_buffer , VK_GOOGLE_display_timing , VK_KHR_shared_presentable_image , and expose it in the list of available Vulkan extensions.
  • [C-SR] Are STRONGLY RECOMMENDED to expose at least one Vulkan queue family where flags contain both VK_QUEUE_GRAPHICS_BIT and VK_QUEUE_COMPUTE_BIT , and queueCount is at least 2.
  • [C-1-7] The GPU and display MUST be able to synchronize access to the shared front buffer such that alternating-eye rendering of VR content at 60fps with two render contexts will be displayed with no visible tearing artifacts.
  • [C-1-9] MUST implement support for AHardwareBuffer flags AHARDWAREBUFFER_USAGE_GPU_DATA_BUFFER , AHARDWAREBUFFER_USAGE_SENSOR_DIRECT_DATA and AHARDWAREBUFFER_USAGE_PROTECTED_CONTENT as described in the NDK.
  • [C-1-10] MUST implement support for AHardwareBuffer s with any combination of the usage flags AHARDWAREBUFFER_USAGE_GPU_COLOR_OUTPUT , AHARDWAREBUFFER_USAGE_GPU_SAMPLED_IMAGE , AHARDWAREBUFFER_USAGE_PROTECTED_CONTENT for at least the following formats: AHARDWAREBUFFER_FORMAT_R5G6B5_UNORM , AHARDWAREBUFFER_FORMAT_R8G8B8A8_UNORM , AHARDWAREBUFFER_FORMAT_R10G10B10A2_UNORM , AHARDWAREBUFFER_FORMAT_R16G16B16A16_FLOAT .
  • [C-SR] Are STRONGLY RECOMMENDED to support the allocation of AHardwareBuffer s with more than one layer and flags and formats specified in C-1-10.
  • [C-1-11] MUST support H.264 decoding at least 3840 x 2160 at 30fps, compressed to an average of 40Mbps (equivalent to 4 instances of 1920 x1080 at 30 fps-10 Mbps or 2 instances of 1920 x 1080 at 60 fps-20 Mbps).
  • [C-1-12] MUST support HEVC and VP9, MUST be capable of decoding at least 1920 x 1080 at 30 fps compressed to an average of 10 Mbps and SHOULD be capable of decoding 3840 x 2160 at 30 fps-20 Mbps (equivalent to 4 instances of 1920 x 1080 at 30 fps-5 Mbps).
  • [C-1-13] MUST support HardwarePropertiesManager.getDeviceTemperatures API and return accurate values for skin temperature.
  • [C-1-14] MUST have an embedded screen, and its resolution MUST be at least 1920 x 1080.
  • [C-SR] Are STRONGLY RECOMMENDED to have a display resolution of at least 2560 x 1440.
  • [C-1-15] The display MUST update at least 60 Hz while in VR Mode.
  • [C-1-17] The display MUST support a low-persistence mode with ≤ 5 milliseconds persistence, persistence being defined as the amount of time for which a pixel is emitting light.
  • [C-1-18] MUST support Bluetooth 4.2 and Bluetooth LE Data Length Extension section 7.4.3 .
  • [C-1-19] MUST support and properly report Direct Channel Type for all of the following default sensor types:
    • TYPE_ACCELEROMETER
    • TYPE_ACCELEROMETER_UNCALIBRATED
    • TYPE_GYROSCOPE
    • TYPE_GYROSCOPE_UNCALIBRATED
    • TYPE_MAGNETIC_FIELD
    • TYPE_MAGNETIC_FIELD_UNCALIBRATED
  • [C-SR] Are STRONGLY RECOMMENDED to support the TYPE_HARDWARE_BUFFER direct channel type for all Direct Channel Types listed above.
  • [C-1-21] MUST meet the gyroscope, accelerometer, and magnetometer related requirements for android.hardware.hifi_sensors , as specified in section 7.3.9 .
  • [C-SR] Are STRONGLY RECOMMENDED to support the android.hardware.sensor.hifi_sensors feature.
  • [C-1-22] MUST have end-to-end motion to photon latency not higher than 28 milliseconds.
  • [C-SR] Are STRONGLY RECOMMENDED to have end-to-end motion to photon latency not higher than 20 milliseconds.
  • [C-1-23] MUST have first-frame ratio, which is the ratio between the brightness of pixels on the first frame after a transition from black to white and the brightness of white pixels in steady state, of at least 85%.
  • [C-SR] Are STRONGLY RECOMMENDED to have first-frame ratio of at least 90%.
  • MAY provide an exclusive core to the foreground application and MAY support the Process.getExclusiveCores API to return the numbers of the cpu cores that are exclusive to the top foreground application.

If exclusive core is supported, then the core:

  • [C-2-1] MUST not allow any other userspace processes to run on it (except device drivers used by the application), but MAY allow some kernel processes to run as necessary.

8. ประสิทธิภาพและพลัง

Some minimum performance and power criteria are critical to the user experience and impact the baseline assumptions developers would have when developing an app.

8.1. ความสม่ำเสมอของประสบการณ์ผู้ใช้

A smooth user interface can be provided to the end user if there are certain minimum requirements to ensure a consistent frame rate and response times for applications and games. Device implementations, depending on the device type, MAY have measurable requirements for the user interface latency and task switching as described in section 2 .

8.2. ประสิทธิภาพการเข้าถึงไฟล์ I/O

Providing a common baseline for a consistent file access performance on the application private data storage ( /data partition) allows app developers to set a proper expectation that would help their software design. Device implementations, depending on the device type, MAY have certain requirements described in section 2 for the following read and write operations:

  • Sequential write performance . Measured by writing a 256MB file using 10MB write buffer.
  • Random write performance . Measured by writing a 256MB file using 4KB write buffer.
  • Sequential read performance . Measured by reading a 256MB file using 10MB write buffer.
  • Random read performance . Measured by reading a 256MB file using 4KB write buffer.

8.3. โหมดประหยัดพลังงาน

If device implementations include features to improve device power management that are included in AOSP or extend the features that are included in AOSP, they:

  • [C-1-1] MUST NOT deviate from the AOSP implementation for the triggering, maintenance, wakeup algorithms and the use of global system settings of App Standby and Doze power-saving modes.
  • [C-1-2] MUST NOT deviate from the AOSP implementation for the use of global settings to manage the throttling of jobs, alarm and network for apps in each bucket for App standby.
  • [C-1-3] MUST NOT deviate from the AOSP implementation for the number of the App Standby Buckets used for App Standby.
  • [C-1-4] MUST implement App Standby Buckets and Doze as described in Power Management .
  • [C-1-5] MUST return true for PowerManager.isPowerSaveMode() when the device is on power save mode.
  • [C-SR] Are STRONGLY RECOMMENDED to provide user affordance to enable and disable the battery saver feature.
  • [C-SR] Are STRONGLY RECOMMENDED to provide user affordance to display all Apps that are exempted from App Standby and Doze power-saving modes.

In addition to the power-saving modes, Android device implementations MAY implement any or all of the 4 sleeping power states as defined by the Advanced Configuration and Power Interface (ACPI).

If device implementations implement S4 power states as defined by the ACPI, they:

  • [C-1-1] MUST enter this state only after the user has taken an explicit action to put the device in an inactive state (eg by closing a lid that is physically part of the device or turning off a vehicle or television) and before the user re-activates the device (eg by opening the lid or turning the vehicle or television back on).

If device implementations implement S3 power states as defined by the ACPI, they:

  • [C-2-1] MUST meet C-1-1 above, or, MUST enter S3 state only when third-party applications do not need the system resources (eg the screen, CPU).

    Conversely, MUST exit from S3 state when third-party applications need the system resources, as described on this SDK.

    For example, while the third party applications request to keep the screen on through FLAG_KEEP_SCREEN_ON or keep CPU running through PARTIAL_WAKE_LOCK , the device MUST NOT enter S3 state unless, as described in C-1-1, the user has taken explicit action to put the device in an inactive state. Conversely, at a time when a task that third party apps implement through JobScheduler is triggered or Firebase Cloud Messaging is delivered to third party apps, the device MUST exit the S3 state unless the user has put the device in an inactive state. These are not comprehensive examples and AOSP implements extensive wake-up signals that trigger a wakeup from this state.

8.4. การบัญชีการใช้พลังงาน

A more accurate accounting and reporting of the power consumption provides the app developer both the incentives and the tools to optimize the power usage pattern of the application.

การใช้งานอุปกรณ์:

  • [SR] STRONGLY RECOMMENDED to provide a per-component power profile that defines the current consumption value for each hardware component and the approximate battery drain caused by the components over time as documented in the Android Open Source Project site.
  • [SR] STRONGLY RECOMMENDED to report all power consumption values in milliampere hours (mAh).
  • [SR] STRONGLY RECOMMENDED to report CPU power consumption per each process's UID. The Android Open Source Project meets the requirement through the uid_cputime kernel module implementation.
  • [SR] STRONGLY RECOMMENDED to make this power usage available via the adb shell dumpsys batterystats shell command to the app developer.
  • SHOULD be attributed to the hardware component itself if unable to attribute hardware component power usage to an application.

8.5. ประสิทธิภาพที่สม่ำเสมอ

Performance can fluctuate dramatically for high-performance long-running apps, either because of the other apps running in the background or the CPU throttling due to temperature limits. Android includes programmatic interfaces so that when the device is capable, the top foreground application can request that the system optimize the allocation of the resources to address such fluctuations.

การใช้งานอุปกรณ์:

If device implementations report support of Sustained Performance Mode, they:

  • [C-1-1] MUST provide the top foreground application a consistent level of performance for at least 30 minutes, when the app requests it.
  • [C-1-2] MUST honor the Window.setSustainedPerformanceMode() API and other related APIs.

If device implementations include two or more CPU cores, they:

  • SHOULD provide at least one exclusive core that can be reserved by the top foreground application.

If device implementations support reserving one exclusive core for the top foreground application, they:

  • [C-2-1] MUST report through the Process.getExclusiveCores() API method the ID numbers of the exclusive cores that can be reserved by the top foreground application.
  • [C-2-2] MUST not allow any user space processes except the device drivers used by the application to run on the exclusive cores, but MAY allow some kernel processes to run as necessary.

If device implementations do not support an exclusive core, they:

9. ความเข้ากันได้ของโมเดลความปลอดภัย

การใช้งานอุปกรณ์:

  • [C-0-1] MUST implement a security model consistent with the Android platform security model as defined in Security and Permissions reference document in the APIs in the Android developer documentation.

  • [C-0-2] MUST support installation of self-signed applications without requiring any additional permissions/certificates from any third parties/authorities. Specifically, compatible devices MUST support the security mechanisms described in the follow subsections.

9.1. สิทธิ์

การใช้งานอุปกรณ์:

  • [C-0-1] MUST support the Android permissions model as defined in the Android developer documentation. Specifically, they MUST enforce each permission defined as described in the SDK documentation; no permissions may be omitted, altered, or ignored.

  • MAY add additional permissions, provided the new permission ID strings are not in the android.\* namespace.

  • [C-0-2] Permissions with a protectionLevel of PROTECTION_FLAG_PRIVILEGED MUST only be granted to apps preinstalled in the privileged path(s) of the system image and within the subset of the explicitly allowlisted permissions for each app. The AOSP implementation meets this requirement by reading and honoring the allowlisted permissions for each app from the files in the etc/permissions/ path and using the system/priv-app path as the privileged path.

Permissions with a protection level of dangerous are runtime permissions. Applications with targetSdkVersion > 22 request them at runtime.

การใช้งานอุปกรณ์:

  • [C-0-3] MUST show a dedicated interface for the user to decide whether to grant the requested runtime permissions and also provide an interface for the user to manage runtime permissions.
  • [C-0-4] MUST have one and only one implementation of both user interfaces.
  • [C-0-5] MUST NOT grant any runtime permissions to preinstalled apps unless:
    • The user's consent can be obtained before the application uses it.
    • The runtime permissions are associated with an intent pattern for which the preinstalled application is set as the default handler.
  • [C-0-6] MUST grant the android.permission.RECOVER_KEYSTORE permission only to system apps that register a properly secured Recovery Agent. A properly secured Recovery Agent is defined as an on-device software agent that synchronizes with an off-device remote storage, that is equipped with secure hardware with protection equivalent or stronger than what is described in Google Cloud Key Vault Service to prevent brute-force attacks on the lockscreen knowledge factor.

If device implementations include a preinstalled app or wish to allow third-party apps to access the usage statistics, they:

  • [SR] are STRONGLY RECOMMENDED provide user-accessible mechanism to grant or revoke access to the usage stats in response to the android.settings.ACTION_USAGE_ACCESS_SETTINGS intent for apps that declare the android.permission.PACKAGE_USAGE_STATS permission.

If device implementations intend to disallow any apps, including preinstalled apps, from accessing the usage statistics, they:

  • [C-1-1] MUST still have an activity that handles the android.settings.ACTION_USAGE_ACCESS_SETTINGS intent pattern but MUST implement it as a no-op, that is to have an equivalent behavior as when the user is declined for access.

9.2. UID และการแยกกระบวนการ

การใช้งานอุปกรณ์:

  • [C-0-1] MUST support the Android application sandbox model, in which each application runs as a unique Unixstyle UID and in a separate process.
  • [C-0-2] MUST support running multiple applications as the same Linux user ID, provided that the applications are properly signed and constructed, as defined in the Security and Permissions reference .

9.3. สิทธิ์ของระบบไฟล์

การใช้งานอุปกรณ์:

9.4. สภาพแวดล้อมการดำเนินการสำรอง

Device implementations MUST keep consistency of the Android security and permission model, even if they include runtime environments that execute applications using some other software or technology than the Dalvik Executable Format or native code. กล่าวอีกนัยหนึ่ง:

  • [C-0-1] Alternate runtimes MUST themselves be Android applications, and abide by the standard Android security model, as described elsewhere in section 9 .

  • [C-0-2] Alternate runtimes MUST NOT be granted access to resources protected by permissions not requested in the runtime's AndroidManifest.xml file via the < uses-permission > mechanism.

  • [C-0-3] Alternate runtimes MUST NOT permit applications to make use of features protected by Android permissions restricted to system applications.

  • [C-0-4] Alternate runtimes MUST abide by the Android sandbox model and installed applications using an alternate runtime MUST NOT reuse the sandbox of any other app installed on the device, except through the standard Android mechanisms of shared user ID and signing certificate .

  • [C-0-5] Alternate runtimes MUST NOT launch with, grant, or be granted access to the sandboxes corresponding to other Android applications.

  • [C-0-6] Alternate runtimes MUST NOT be launched with, be granted, or grant to other applications any privileges of the superuser (root), or of any other user ID.

  • [C-0-7] When the .apk files of alternate runtimes are included in the system image of device implementations, it MUST be signed with a key distinct from the key used to sign other applications included with the device implementations.

  • [C-0-8] When installing applications, alternate runtimes MUST obtain user consent for the Android permissions used by the application.

  • [C-0-9] When an application needs to make use of a device resource for which there is a corresponding Android permission (such as Camera, GPS, etc.), the alternate runtime MUST inform the user that the application will be able to access that resource.

  • [C-0-10] When the runtime environment does not record application capabilities in this manner, the runtime environment MUST list all permissions held by the runtime itself when installing any application using that runtime.

  • Alternate runtimes SHOULD install apps via the PackageManager into separate Android sandboxes (Linux user IDs, etc.).

  • Alternate runtimes MAY provide a single Android sandbox shared by all applications using the alternate runtime.

9.5. การสนับสนุนผู้ใช้หลายคน

Android includes support for multiple users and provides support for full user isolation.

  • Device implementations MAY but SHOULD NOT enable multi-user if they use removable media for primary external storage.

If device implementations include multiple users, they:

  • [C-1-1] MUST meet the following requirements related to multi-user support .
  • [C-1-2] MUST, for each user, implement a security model consistent with the Android platform security model as defined in Security and Permissions reference document in the APIs.
  • [C-1-3] MUST have separate and isolated shared application storage (aka /sdcard ) directories for each user instance.
  • [C-1-4] MUST ensure that applications owned by and running on behalf a given user cannot list, read, or write to the files owned by any other user, even if the data of both users are stored on the same volume or ระบบไฟล์
  • [C-1-5] MUST encrypt the contents of the SD card when multiuser is enabled using a key stored only on non-removable media accessible only to the system if device implementations use removable media for the external storage APIs. As this will make the media unreadable by a host PC, device implementations will be required to switch to MTP or a similar system to provide host PCs with access to the current user's data.

If device implementations include multiple users and do not declare the android.hardware.telephony feature flag, they:

  • [C-2-1] MUST support restricted profiles, a feature that allows device owners to manage additional users and their capabilities on the device. ด้วยโปรไฟล์ที่ถูกจำกัด เจ้าของอุปกรณ์สามารถตั้งค่าสภาพแวดล้อมแยกต่างหากสำหรับผู้ใช้เพิ่มเติมเพื่อทำงานได้อย่างรวดเร็ว พร้อมด้วยความสามารถในการจัดการข้อจำกัดที่ละเอียดยิ่งขึ้นในแอปที่มีอยู่ในสภาพแวดล้อมเหล่านั้น

If device implementations include multiple users and declare the android.hardware.telephony feature flag, they:

  • [C-3-1] MUST NOT support restricted profiles but MUST align with the AOSP implementation of controls to enable /disable other users from accessing the voice calls and SMS.

9.6. คำเตือนทาง SMS ระดับพรีเมียม

Android includes support for warning users of any outgoing premium SMS message . Premium SMS messages are text messages sent to a service registered with a carrier that may incur a charge to the user.

If device implementations declare support for android.hardware.telephony , they:

  • [C-1-1] MUST warn users before sending a SMS message to numbers identified by regular expressions defined in /data/misc/sms/codes.xml file in the device. The upstream Android Open Source Project provides an implementation that satisfies this requirement.

9.7. คุณสมบัติด้านความปลอดภัย

Device implementations MUST ensure compliance with security features in both the kernel and platform as described below.

The Android Sandbox includes features that use the Security-Enhanced Linux (SELinux) mandatory access control (MAC) system, seccomp sandboxing, and other security features in the Linux kernel. การใช้งานอุปกรณ์:

  • [C-0-1] MUST maintain compatibility with existing applications, even when SELinux or any other security features are implemented below the Android framework.
  • [C-0-2] MUST NOT have a visible user interface when a security violation is detected and successfully blocked by the security feature implemented below the Android framework, but MAY have a visible user interface when an unblocked security violation occurs resulting in a successful หาประโยชน์
  • [C-0-3] MUST NOT make SELinux or any other security features implemented below the Android framework configurable to the user or app developer.
  • [C-0-4] MUST NOT allow an application that can affect another application through an API (such as a Device Administration API) to configure a policy that breaks compatibility.
  • [C-0-5] MUST split the media framework into multiple processes so that it is possible to more narrowly grant access for each process as described in the Android Open Source Project site.
  • [C-0-6] MUST implement a kernel application sandboxing mechanism which allows filtering of system calls using a configurable policy from multithreaded programs. The upstream Android Open Source Project meets this requirement through enabling the seccomp-BPF with threadgroup synchronization (TSYNC) as described in the Kernel Configuration section of source.android.com .

Kernel integrity and self-protection features are integral to Android security. การใช้งานอุปกรณ์:

  • [C-0-7] MUST implement kernel stack buffer overflow protections (eg CONFIG_CC_STACKPROTECTOR_STRONG ).
  • [C-0-8] MUST implement strict kernel memory protections where executable code is read-only, read-only data is non-executable and non-writable, and writable data is non-executable (eg CONFIG_DEBUG_RODATA or CONFIG_STRICT_KERNEL_RWX ).
  • [C-0-9] MUST implement static and dynamic object size bounds checking of copies between user-space and kernel-space (eg CONFIG_HARDENED_USERCOPY ) on devices originally shipping with API level 28 or higher.
  • [C-0-10] MUST NOT execute user-space memory when executing in the kernel mode (eg hardware PXN, or emulated via CONFIG_CPU_SW_DOMAIN_PAN or CONFIG_ARM64_SW_TTBR0_PAN ) on devices originally shipping with API level 28 or higher.
  • [C-0-11] MUST NOT read or write user-space memory in the kernel outside of normal usercopy access APIs (eg hardware PAN, or emulated via CONFIG_CPU_SW_DOMAIN_PAN or CONFIG_ARM64_SW_TTBR0_PAN ) on devices originally shipping with API level 28 or higher.
  • [C-0-12] MUST implement kernel page table isolation on all devices originally shipping with API level 28 or higher (eg CONFIG_PAGE_TABLE_ISOLATION or `CONFIG_UNMAP_KERNEL_AT_EL0).
  • [SR] STRONGLY RECOMMENDED to keep kernel data which is written only during initialization marked read-only after initialization (eg __ro_after_init ).
  • [SR] STRONGLY RECOMMENDED to randomize the layout of the kernel code and memory, and to avoid exposures that would compromise the randomization (eg CONFIG_RANDOMIZE_BASE with bootloader entropy via the /chosen/kaslr-seed Device Tree node or EFI_RNG_PROTOCOL ).

If device implementations use a Linux kernel, they:

  • [C-1-1] MUST implement SELinux.
  • [C-1-2] MUST set SELinux to global enforcing mode.
  • [C-1-3] MUST configure all domains in enforcing mode. No permissive mode domains are allowed, including domains specific to a device/vendor.
  • [C-1-4] MUST NOT modify, omit, or replace the neverallow rules present within the system/sepolicy folder provided in the upstream Android Open Source Project (AOSP) and the policy MUST compile with all neverallow rules present, for both AOSP SELinux domains as well as device/vendor specific domains.
  • [C-1-5] MUST run third-party applications targeting API level 28 or higher in per-application SELinux sandboxes with per-app SELinux restrictions on each application's private data directory.
  • SHOULD retain the default SELinux policy provided in the system/sepolicy folder of the upstream Android Open Source Project and only further add to this policy for their own device-specific configuration.

If device implementations use kernel other than Linux, they:

  • [C-2-1] MUST use a mandatory access control system that is equivalent to SELinux.

Android contains multiple defense-in-depth features that are integral to device security.

การใช้งานอุปกรณ์:

  • [C-SR] Are STRONGLY RECOMMENDED not to disable Control-Flow Integrity (CFI) or Integer Overflow Sanitization (IntSan) on components that have it enabled.
  • [C-SR] Are STRONGLY RECOMMENDED to enable both CFI and IntSan for any additional security-sensitive userspace components as explained in CFI and IntSan .

9.8. ความเป็นส่วนตัว

9.8.1. ประวัติการใช้งาน

Android stores the history of the user's choices and manages such history by UsageStatsManager .

การใช้งานอุปกรณ์:

  • [C-0-1] MUST keep a reasonable retention period of such user history.
  • [SR] Are STRONGLY RECOMMENDED to keep the 14 days retention period as configured by default in the AOSP implementation.

Android stores the system events using the StatsLog identifiers, and manages such history via the StatsManager and the IncidentManager System API.

การใช้งานอุปกรณ์:

  • [C-0-2] MUST only include the fields marked with DEST_AUTOMATIC in the incident report created by the System API class IncidentManager .
  • [C-0-3] MUST not use the system event identifiers to log any other event than what is described in the StatsLog SDK documents. If additional system events are logged, they MAY use a different atom identifier in the range between 100,000 and 200,000.

9.8.2. การบันทึก

การใช้งานอุปกรณ์:

  • [C-0-1] MUST NOT preload or distribute software components out-of-box that send the user's private information (eg keystrokes, text displayed on the screen) off the device without the user's consent or clear ongoing notifications.

If device implementations include functionality in the system that captures the contents displayed on the screen and/or records the audio stream played on the device, they:

  • [C-1-1] MUST have an ongoing notification to the user whenever this functionality is enabled and actively capturing/recording.

If device implementations include a component enabled out-of-box, capable of recording ambient audio to infer useful information about user's context, they:

  • [C-2-1] MUST NOT store in persistent on-device storage or transmit off the device the recorded raw audio or any format that can be converted back into the original audio or a near facsimile, except with explicit user consent.

9.8.3. การเชื่อมต่อ

If device implementations have a USB port with USB peripheral mode support, they:

  • [C-1-1] MUST present a user interface asking for the user's consent before allowing access to the contents of the shared storage over the USB port.

9.8.4. การรับส่งข้อมูลเครือข่าย

การใช้งานอุปกรณ์:

  • [C-0-1] MUST preinstall the same root certificates for the system-trusted Certificate Authority (CA) store as provided in the upstream Android Open Source Project.
  • [C-0-2] MUST ship with an empty user root CA store.
  • [C-0-3] MUST display a warning to the user indicating the network traffic may be monitored, when a user root CA is added.

If device traffic is routed through a VPN, device implementations:

  • [C-1-1] MUST display a warning to the user indicating either:
    • That network traffic may be monitored.
    • That network traffic is being routed through the specific VPN application providing the VPN.

If device implementations have a mechanism, enabled out-of-box by default, that routes network data traffic through a proxy server or VPN gateway (for example, preloading a VPN service with android.permission.CONTROL_VPN granted), they:

  • [C-2-1] MUST ask for the user's consent before enabling that mechanism, unless that VPN is enabled by the Device Policy Controller via the DevicePolicyManager.setAlwaysOnVpnPackage() , in which case the user does not need to provide a separate consent, but MUST only be notified.

If device implementations implement a user affordance to toggle on the "always-on VPN" function of a 3rd-party VPN app, they:

  • [C-3-1] MUST disable this user affordance for apps that do not support always-on VPN service in the AndroidManifest.xml file via setting the SERVICE_META_DATA_SUPPORTS_ALWAYS_ON attribute to false .

9.9. การเข้ารหัสการจัดเก็บข้อมูล

If Advanced Encryption Standard (AES) crypto performance, measured with the most performant AES technology available on the device (eg the ARM Cryptography Extensions), is above 50 MiB/sec, device implementations:

  • [C-1-1] MUST support data storage encryption of the application private data ( /data partition), as well as the application shared storage partition ( /sdcard partition) if it is a permanent, non-removable part of the device, except for device implementations that are typically shared (eg Television).
  • [C-1-2] MUST enable the data storage encryption by default at the time the user has completed the out-of-box setup experience, except for device implementations that are typically shared (eg Television).

If the AES crypto performance is at or below 50 MiB/sec, device implementations MAY use Adiantum-XChaCha12-AES instead of the form of AES listed in any of the following: AES-256-XTS in Section 9.9.2 [C-1-5]; AES-256 in CBS-CTS mode in Section 9.9.2 [C-1-6]; AES in Section 9.9.3 [C-1-1]; AES in Section 9.9.3 [C-1-3].

If device implementations are already launched on an earlier Android version and cannot meet the requirement through a system software update, they MAY be exempted from the above requirements.

การใช้งานอุปกรณ์:

9.9.1. บูตโดยตรง

การใช้งานอุปกรณ์:

  • [C-0-1] MUST implement the Direct Boot mode APIs even if they do not support Storage Encryption.

  • [C-0-2] The ACTION_LOCKED_BOOT_COMPLETED and ACTION_USER_UNLOCKED Intents MUST still be broadcast to signal Direct Boot aware applications that Device Encrypted (DE) and Credential Encrypted (CE) storage locations are available for user.

9.9.2. การเข้ารหัสตามไฟล์

If device implementations support FBE, they:

  • [C-1-1] MUST boot up without challenging the user for credentials and allow Direct Boot aware apps to access to the Device Encrypted (DE) storage after the ACTION_LOCKED_BOOT_COMPLETED message is broadcasted.
  • [C-1-2] MUST only allow access to Credential Encrypted (CE) storage after the user has unlocked the device by supplying their credentials (eg. passcode, pin, pattern or fingerprint) and the ACTION_USER_UNLOCKED message is broadcasted.
  • [C-1-3] MUST NOT offer any method to unlock the CE protected storage without either the user-supplied credentials or a registered escrow key.
  • [C-1-4] MUST support Verified Boot and ensure that DE keys are cryptographically bound to the device's hardware root of trust.
  • [C-1-5] MUST support encrypting file contents using AES-256-XTS. AES-256-XTS refers to the Advanced Encryption Standard with a 256-bit key length, operated in XTS mode. The full length of the XTS key is 512 bits.
  • [C-1-6] MUST support encrypting file names using AES-256 in CBC-CTS mode.

  • The keys protecting CE and DE storage areas:

  • [C-1-7] MUST be cryptographically bound to a hardware-backed Keystore.

  • [C-1-8] CE keys MUST be bound to a user's lock screen credentials.
  • [C-1-9] CE keys MUST be bound to a default passcode when the user has not specified lock screen credentials.
  • [C-1-10] MUST be unique and distinct, in other words no user's CE or DE key matches any other user's CE or DE keys.

  • [C-1-11] MUST use the mandatorily supported ciphers, key lengths and modes by default.

  • [C-SR] Are STRONGLY RECOMMENDED to encrypt file system metadata, such as file sizes, ownership, modes, and Extended attributes (xattrs), with a key cryptographically bound to the device's hardware root of trust.

  • SHOULD make preinstalled essential apps (eg Alarm, Phone, Messenger) Direct Boot aware.

  • MAY support alternative ciphers, key lengths and modes for file content and file name encryption.

The upstream Android Open Source project provides a preferred implementation of this feature based on the Linux kernel ext4 encryption feature.

9.9.3. การเข้ารหัสดิสก์แบบเต็ม

If device implementations support full disk encryption (FDE), they:

  • [C-1-1] MUST use AES in a mode designed for storage (for example, XTS or CBC-ESSIV), and with a cipher key length of 128 bits or greater.
  • [C-1-2] MUST use a default passcode to wrap the encryption key and MUST NOT write the encryption key to storage at any time without being encrypted.
  • [C-1-3] MUST AES encrypt the encryption key by default unless the user explicitly opts out, except when it is in active use, with the lock screen credentials stretched using a slow stretching algorithm (eg PBKDF2 or scrypt).
  • [C-1-4] The above default password stretching algorithm MUST be cryptographically bound to that keystore when the user has not specified a lock screen credentials or has disabled use of the passcode for encryption and the device provides a hardware-backed keystore.
  • [C-1-5] MUST NOT send encryption key off the device (even when wrapped with the user passcode and/or hardware bound key).

The upstream Android Open Source project provides a preferred implementation of this feature, based on the Linux kernel feature dm-crypt.

9.10. ความสมบูรณ์ของอุปกรณ์

The following requirements ensures there is transparency to the status of the device integrity. การใช้งานอุปกรณ์:

  • [C-0-1] MUST correctly report through the System API method PersistentDataBlockManager.getFlashLockState() whether their bootloader state permits flashing of the system image. The FLASH_LOCK_UNKNOWN state is reserved for device implementations upgrading from an earlier version of Android where this new system API method did not exist.

  • [C-0-2] MUST support Verified Boot for device integrity.

If device implementations are already launched without supporting Verified Boot on an earlier version of Android and can not add support for this feature with a system software update, they MAY be exempted from the requirement.

Verified Boot is a feature that guarantees the integrity of the device software. If device implementations support the feature, they:

  • [C-1-1] MUST declare the platform feature flag android.software.verified_boot .
  • [C-1-2] MUST perform verification on every boot sequence.
  • [C-1-3] MUST start verification from an immutable hardware key that is the root of trust and go all the way up to the system partition.
  • [C-1-4] MUST implement each stage of verification to check the integrity and authenticity of all the bytes in the next stage before executing the code in the next stage.
  • [C-1-5] MUST use verification algorithms as strong as current recommendations from NIST for hashing algorithms (SHA-256) and public key sizes (RSA-2048).
  • [C-1-6] MUST NOT allow boot to complete when system verification fails, unless the user consents to attempt booting anyway, in which case the data from any non-verified storage blocks MUST not be used.
  • [C-1-7] MUST NOT allow verified partitions on the device to be modified unless the user has explicitly unlocked the bootloader.
  • [C-SR] If there are multiple discrete chips in the device (eg radio, specialized image processor), the boot process of each of those chips is STRONGLY RECOMMENDED to verify every stage upon booting.
  • [C-1-8] MUST use tamper-evident storage: for storing whether the bootloader is unlocked. Tamper-evident storage means that the boot loader can detect if the storage has been tampered with from inside Android.
  • [C-1-9] MUST prompt the user, while using the device, and require physical confirmation before allowing a transition from boot loader locked mode to boot loader unlocked mode.
  • [C-1-10] MUST implement rollback protection for partitions used by Android (eg boot, system partitions) and use tamper-evident storage for storing the metadata used for determining the minimum allowable OS version.
  • [C-SR] Are STRONGLY RECOMMENDED to verify all privileged app APK files with a chain of trust rooted in /system , which is protected by Verified Boot.
  • [C-SR] Are STRONGLY RECOMMENDED to verify any executable artifacts loaded by a privileged app from outside its APK file (such as dynamically loaded code or compiled code) before executing them or STRONGLY RECOMMENDED not to execute them at all.
  • SHOULD implement rollback protection for any component with persistent firmware (eg modem, camera) and SHOULD use tamper-evident storage for storing the metadata used for determining the minimum allowable version.

If device implementations are already launched without supporting C-1-8 through C-1-10 on an earlier version of Android and can not add support for these requirements with a system software update, they MAY be exempted from the requirements.

The upstream Android Open Source Project provides a preferred implementation of this feature in the external/avb/ repository, which can be integrated into the boot loader used for loading Android.

การใช้งานอุปกรณ์:

If device implementations support the Android Protected Confirmation API they:

  • [C-3-1] MUST report true for the ConfirmationPrompt.isSupported() API.
  • [C-3-2] MUST ensure that secure hardware takes full control of display in such a way that Android OS cannot block it without detection by the secure hardware.
  • [C-3-3] MUST ensure that secure hardware takes full control of the touch screen.

9.11. กุญแจและข้อมูลรับรอง

The Android Keystore System allows app developers to store cryptographic keys in a container and use them in cryptographic operations through the KeyChain API or the Keystore API . การใช้งานอุปกรณ์:

  • [C-0-1] MUST allow at least 8,192 keys to be imported or generated.
  • [C-0-2] The lock screen authentication MUST rate-limit attempts and MUST have an exponential backoff algorithm. Beyond 150 failed attempts, the delay MUST be at least 24 hours per attempt.
  • SHOULD not limit the number of keys that can be generated

When the device implementation supports a secure lock screen, it:

  • [C-1-1] MUST back up the keystore implementation with an isolated execution environment.
  • [C-1-2] MUST have implementations of RSA, AES, ECDSA and HMAC cryptographic algorithms and MD5, SHA1, and SHA-2 family hash functions to properly support the Android Keystore system's supported algorithms in an area that is securely isolated from the code running on the kernel and above. การแยกที่ปลอดภัยจะต้องบล็อกกลไกที่เป็นไปได้ทั้งหมดที่เคอร์เนลหรือรหัสพื้นที่ผู้ใช้อาจเข้าถึงสถานะภายในของสภาพแวดล้อมที่แยกได้ รวมถึง DMA โครงการโอเพ่นซอร์ส Android ขั้นต้น (AOSP) ตรงตามข้อกำหนดนี้โดยใช้การใช้งาน Trusty แต่โซลูชันที่ใช้ ARM TrustZone อื่นหรือการใช้งานที่ปลอดภัยที่ได้รับการตรวจสอบโดยบุคคลที่สามของการแยกตามไฮเปอร์ไวเซอร์ที่เหมาะสมนั้นเป็นทางเลือกอื่น
  • [C-1-3] MUST perform the lock screen authentication in the isolated execution environment and only when successful, allow the authentication-bound keys to be used. ข้อมูลรับรองหน้าจอล็อคจะต้องจัดเก็บในลักษณะที่อนุญาตเฉพาะสภาพแวดล้อมการดำเนินการที่แยกออกมาเท่านั้นที่จะดำเนินการตรวจสอบสิทธิ์หน้าจอล็อคได้ โครงการโอเพ่นซอร์ส Android อัปสตรีมมอบ Gatekeeper Hardware Abstraction Layer (HAL) และ Trusty ซึ่งสามารถใช้เพื่อตอบสนองข้อกำหนดนี้
  • [C-1-4] MUST support key attestation where the attestation signing key is protected by secure hardware and signing is performed in secure hardware. The attestation signing keys MUST be shared across large enough number of devices to prevent the keys from being used as device identifiers. One way of meeting this requirement is to share the same attestation key unless at least 100,000 units of a given SKU are produced. If more than 100,000 units of an SKU are produced, a different key MAY be used for each 100,000 units.
  • [C-1-5] MUST allow the user to choose the Sleep timeout for transition from the unlocked to the locked state, with a minimum allowable timeout up to 15 seconds.

Note that if a device implementation is already launched on an earlier Android version, such a device is exempted from the requirement to have a keystore backed by an isolated execution environment and support the key attestation, unless it declares the android.hardware.fingerprint feature which requires a keystore backed by an isolated execution environment.

9.11.1. หน้าจอล็อคที่ปลอดภัย

The AOSP implementation follows a tiered authentication model where a knowledge-factory based primary authentication can be backed by either a secondary strong biometric, or by weaker tertiary modalities.

การใช้งานอุปกรณ์:

  • [C-SR] Are STRONGLY RECOMMENDED to set only one of the following as the primary authentication method:
    • A numerical PIN
    • An alphanumerical password
    • A swipe pattern on a grid of exactly 3x3 dots

Note that the above authentication methods are referred as the recommended primary authentication methods in this document.

If device implementations add or modify the recommended primary authentication methods and use a new authentication method as a secure way to lock the screen, the new authentication method:

If device implementations add or modify the authentication methods to unlock the lock screen if based on a known secret and use a new authentication method to be treated as a secure way to lock the screen:

  • [C-3-1] The entropy of the shortest allowed length of inputs MUST be greater than 10 bits.
  • [C-3-2] The maximum entropy of all possible inputs MUST be greater than 18 bits.
  • [C-3-3] The new authentication method MUST NOT replace any of the recommended primary authentication methods (ie PIN, pattern, password) implemented and provided in AOSP.
  • [C-3-4] The new authentication method MUST be disabled when the Device Policy Controller (DPC) application has set the password quality policy via the DevicePolicyManager.setPasswordQuality() method with a more restrictive quality constant than PASSWORD_QUALITY_SOMETHING .

If device implementations add or modify the recommended primary authentication methods to unlock the lock screen and use a new authentication method that is based on biometrics to be treated as a secure way to lock the screen, the new method:

  • [C-4-1] MUST meet all requirements described in section 7.3.10.2 .
  • [C-4-2] MUST have a fall-back mechanism to use one of the recommended primary authentication methods which is based on a known secret.
  • [C-4-3] MUST be disabled and only allow the recommended primary authentication to unlock the screen when the Device Policy Controller (DPC) application has set the keguard feature policy by calling the method DevicePolicyManager.setKeyguardDisabledFeatures() , with any of the associated biometric flags (ie KEYGUARD_DISABLE_BIOMETRICS , KEYGUARD_DISABLE_FINGERPRINT , KEYGUARD_DISABLE_FACE , or KEYGUARD_DISABLE_IRIS ).
  • [C-4-4] MUST challenge the user for the recommended primary authentication (eg PIN, pattern, password) at least once every 72 hours or less.
  • [C-4-5] MUST have a false acceptance rate that is equal or stronger than what is required for a fingerprint sensor as described in section section 7.3.10 , or otherwise MUST be disabled and only allow the recommended primary authentication to unlock the screen when the Device Policy Controller (DPC) application has set the password quality policy via the DevicePolicyManager.setPasswordQuality() method with a more restrictive quality constant than PASSWORD_QUALITY_BIOMETRIC_WEAK .
  • [C-SR] Are STRONGLY RECOMMENDED to have spoof and imposter acceptance rates that are equal to or stronger than what is required for a fingerprint sensor as described in section 7.3.10 .
  • [C-4-6] MUST have a secure processing pipeline such that an operating system or kernel compromise cannot allow data to be directly injected to falsely authenticate as the user.
  • [C-4-7] MUST be paired with an explicit confirm action (eg: a button press) to allow access to keystore keys if the application sets true for KeyGenParameterSpec.Built.setUserAuthenticationRequired() and the biometric is passive (eg face or iris where no explicit signal of intent exists).
  • [C-SR] The confirm action for passive biometrics is STRONGLY RECOMMENDED to be secured such that an operating system or kernel compromise cannot spoof it. For example, this means that the confirm action based on a physical button is routed through an input-only general-purpose input/output (GPIO) pin of a secure element (SE) that cannot be driven by any other means than a physical button กด.

If the biometric authentication methods do not meet the spoof and imposter acceptance rates as described in section 7.3.10 :

  • [C-5-1] The methods MUST be disabled if the Device Policy Controller (DPC) application has set the password quality policy via the DevicePolicyManager.setPasswordQuality() method with a more restrictive quality constant than PASSWORD_QUALITY_BIOMETRIC_WEAK .
  • [C-5-2] The user MUST be challenged for the recommended primary authentication (eg: PIN, pattern, password) after any 4-hour idle timeout period. The idle timeout period is reset after any successful confirmation of the device credentials.
  • [C-5-3] The methods MUST NOT be treated as a secure lock screen, and MUST meet the requirements that start with C-8 in this section below.

If device implementations add or modify the authentication methods to unlock the lock screen and a new authentication method is based on a physical token or the location:

  • [C-6-1] They MUST have a fall-back mechanism to use one of the recommended primary authentication methods which is based on a known secret and meet the requirements to be treated as a secure lock screen.
  • [C-6-2] The new method MUST be disabled and only allow one of the recommended primary authentication methods to unlock the screen when the Device Policy Controller (DPC) application has set the policy with either the DevicePolicyManager.setKeyguardDisabledFeatures(KEYGUARD_DISABLE_TRUST_AGENTS) method or the DevicePolicyManager.setPasswordQuality() method with a more restrictive quality constant than PASSWORD_QUALITY_UNSPECIFIED .
  • [C-6-3] The user MUST be challenged for one of the recommended primary authentication methods (egPIN, pattern, password) at least once every 72 hours or less.
  • [C-6-4] The new method MUST NOT be treated as a secure lock screen and MUST follow the constraints listed in C-8 below.

If device implementations have a secure lock screen and include one or more trust agent, which implements the TrustAgentService System API, they:

  • [C-7-1] MUST have clear indication in the settings menu and on the lock screen when device lock is deferred or can be unlocked by trust agent(s). For example, AOSP meets this requirement by showing a text description for the "Automatically lock setting" and "Power button instantly locks" in the settings menu and a distinguishable icon on the lock screen.
  • [C-7-2] MUST respect and fully implement all trust agent APIs in the DevicePolicyManager class, such as the KEYGUARD_DISABLE_TRUST_AGENTS constant.
  • [C-7-3] MUST NOT fully implement the TrustAgentService.addEscrowToken() function on a device that is used as a primary personal device (eg handheld) but MAY fully implement the function on device implementations that are typically shared (eg Android Television or Automotive device).
  • [C-7-4] MUST encrypt all stored tokens added by TrustAgentService.addEscrowToken() .
  • [C-7-5] MUST NOT store the encryption key on the same device where the key is used. For example, it is allowed for a key stored on a phone to unlock a user account on a TV.
  • [C-7-6] MUST inform the user about the security implications before enabling the escrow token to decrypt the data storage.
  • [C-7-7] MUST have a fall-back mechanism to use one of the recommended primary authentication methods.
  • [C-7-8] The user MUST be challenged for one of the recommended primary authentication (eg: PIN, pattern, password) methods at least once every 72 hours or less.
  • [C-7-9] The user MUST be challenged for one of the recommended primary authentication (eg: PIN, pattern, password) methods after any 4-hour idle timeout period. The idle timeout period is reset after any successful confirmation of the device credentials.
  • [C-7-10] MUST NOT be treated as a secure lock screen and MUST follow the constraints listed in C-8 below.

If device implementations add or modify the authentication methods to unlock the lock screen that is not a secure lock screen as described above, and use a new authentication method to unlock the keyguard:

9.11.2. กำปั่น

The Android Keystore System allows app developers to store cryptographic keys in a dedicated secure processor as well as the isolated execution environment described above.

การใช้งานอุปกรณ์:

  • [C-SR] Are STRONGLY RECOMMENDED to support StrongBox.

If device implementations support StrongBox, they:

  • [C-1-1] MUST declare FEATURE_STRONGBOX_KEYSTORE .

  • [C-1-2] MUST provide dedicated secure hardware that is used to back keystore and secure user authentication.

  • [C-1-3] MUST have a discrete CPU that shares no cache, DRAM, coprocessors or other core resources with the application processor (AP).

  • [C-1-4] MUST ensure that any peripherals shared with the AP cannot alter StrongBox processing in any way, or obtain any information from the StrongBox. The AP MAY disable or block access to StrongBox.

  • [C-1-5] MUST have an internal clock with reasonable accuracy (+-10%) that is immune to manipulation by the AP.

  • [C-1-6] MUST have a true random number generator that produces uniformly-distributed and unpredictable output.

  • [C-1-7] MUST have tamper resistance, including resistance against physical penetration, and glitching.

  • [C-1-8] MUST have side-channel resistance, including resistance against leaking information via power, timing, electromagnetic radiation, and thermal radiation side channels.

  • [C-1-9] MUST have secure storage which ensures confidentiality, integrity, authenticity, consistency, and freshness of the contents. The storage MUST NOT be able to be read or altered, except as permitted by the StrongBox APIs.

  • To validate compliance with [C-1-3] through [C-1-9], device implementations:

    • [C-1-10] MUST include the hardware that is certified against the Secure IC Protection Profile BSI-CC-PP-0084-2014 or evaluated by a nationally accredited testing laboratory incorporating High attack potential vulnerability assessment according to the Common Criteria Application of Attack Potential to Smartcards .
    • [C-1-11] MUST include the firmware that is evaluated by a nationally accredited testing laboratory incorporating High attack potential vulnerability assessment according to the Common Criteria Application of Attack Potential to Smartcards .
    • [C-SR] Are STRONGLY RECOMMENDED to include the hardware that is evaluated using a Security Target, Evaluation Assurance Level (EAL) 5, augmented by AVA_VAN.5. EAL 5 certification will likely become a requirement in a future release.
  • [C-SR] are STRONGLY RECOMMENDED to provide insider attack resistance (IAR), which means that an insider with access to firmware signing keys cannot produce firmware that causes the StrongBox to leak secrets, to bypass functional security requirements or otherwise enable access to sensitive ข้อมูลผู้ใช้ The recommended way to implement IAR is to allow firmware updates only when the primary user password is provided via the IAuthSecret HAL.

9.12. การลบข้อมูล

All device implementations:

  • [C-0-1] MUST provide users a mechanism to perform a "Factory Data Reset".
  • [C-0-2] MUST delete all user-generated data. That is, all data except for the following:
    • The system image
    • Any operating system files required by the system image
  • [C-0-3] MUST delete the data in such a way that will satisfy relevant industry standards such as NIST SP800-88.
  • [C-0-4] MUST trigger the above "Factory Data Reset" process when the DevicePolicyManager.wipeData() API is called by the primary user's Device Policy Controller app.
  • MAY provide a fast data wipe option that conducts only a logical data erase.

9.13. โหมดบูตปลอดภัย

Android provides Safe Boot Mode, which allows users to boot up into a mode where only preinstalled system apps are allowed to run and all third-party apps are disabled. This mode, known as "Safe Boot Mode", provides the user the capability to uninstall potentially harmful third-party apps.

Device implementations are:

  • [SR] STRONGLY RECOMMENDED to implement Safe Boot Mode.

If device implementations implement Safe Boot Mode, they:

  • [C-1-1] MUST provide the user an option to enter Safe Boot Mode in such a way that is uninterruptible from third-party apps installed on the device, except when the third-party app is a Device Policy Controller and has set the UserManager.DISALLOW_SAFE_BOOT flag as true.

  • [C-1-2] MUST provide the user the capability to uninstall any third-party apps within Safe Mode.

  • SHOULD provide the user an option to enter Safe Boot Mode from the boot menu using a workflow that is different from that of a normal boot.

9.14. การแยกระบบยานยนต์

Android Automotive devices are expected to exchange data with critical vehicle subsystems by using the vehicle HAL to send and receive messages over vehicle networks such as CAN bus.

The data exchange can be secured by implementing security features below the Android framework layers to prevent malicious or unintentional interaction with these subsystems.

9.15. แผนการสมัครสมาชิก

"Subscription plans" refer to the billing relationship plan details provided by a mobile carrier through SubscriptionManager.setSubscriptionPlans() .

All device implementations:

  • [C-0-1] MUST return subscription plans only to the mobile carrier app that has originally provided them.
  • [C-0-2] MUST NOT remotely back up or upload subscription plans.
  • [C-0-3] MUST only allow overrides, such as SubscriptionManager.setSubscriptionOverrideCongested() , from the mobile carrier app currently providing valid subscription plans.

10. การทดสอบความเข้ากันได้ของซอฟต์แวร์

Device implementations MUST pass all tests described in this section. However, note that no software test package is fully comprehensive. For this reason, device implementers are STRONGLY RECOMMENDED to make the minimum number of changes as possible to the reference and preferred implementation of Android available from the Android Open Source Project. This will minimize the risk of introducing bugs that create incompatibilities requiring rework and potential device updates.

10.1. ชุดทดสอบความเข้ากันได้

การใช้งานอุปกรณ์:

  • [C-0-1] MUST pass the Android Compatibility Test Suite (CTS) available from the Android Open Source Project, using the final shipping software on the device.

  • [C-0-2] MUST ensure compatibility in cases of ambiguity in CTS and for any reimplementations of parts of the reference source code.

The CTS is designed to be run on an actual device. Like any software, the CTS may itself contain bugs. The CTS will be versioned independently of this Compatibility Definition, and multiple revisions of the CTS may be released for Android 9.

การใช้งานอุปกรณ์:

  • [C-0-3] MUST pass the latest CTS version available at the time the device software is completed.

  • SHOULD use the reference implementation in the Android Open Source tree as much as possible.

10.2. เครื่องตรวจสอบ CTS

The CTS Verifier is included with the Compatibility Test Suite, and is intended to be run by a human operator to test functionality that cannot be tested by an automated system, such as correct functioning of a camera and sensors.

การใช้งานอุปกรณ์:

  • [C-0-1] MUST correctly execute all applicable cases in the CTS verifier.

The CTS Verifier has tests for many kinds of hardware, including some hardware that is optional.

การใช้งานอุปกรณ์:

  • [C-0-2] MUST pass all tests for hardware that they possess; for instance, if a device possesses an accelerometer, it MUST correctly execute the Accelerometer test case in the CTS Verifier.

Test cases for features noted as optional by this Compatibility Definition Document MAY be skipped or omitted.

  • [C-0-2] Every device and every build MUST correctly run the CTS Verifier, as noted above. However, since many builds are very similar, device implementers are not expected to explicitly run the CTS Verifier on builds that differ only in trivial ways. Specifically, device implementations that differ from an implementation that has passed the CTS Verifier only by the set of included locales, branding, etc. MAY omit the CTS Verifier test.

11. ซอฟต์แวร์ที่สามารถอัพเดตได้

  • [C-0-1] Device implementations MUST include a mechanism to replace the entirety of the system software. The mechanism need not perform “live” upgrades—that is, a device restart MAY be required. Any method can be used, provided that it can replace the entirety of the software preinstalled on the device. For instance, any of the following approaches will satisfy this requirement:

    • “Over-the-air (OTA)” downloads with offline update via reboot.
    • “Tethered” updates over USB from a host PC.
    • “Offline” updates via a reboot and update from a file on removable storage.
  • [C-0-2] The update mechanism used MUST support updates without wiping user data. That is, the update mechanism MUST preserve application private data and application shared data. Note that the upstream Android software includes an update mechanism that satisfies this requirement.

If the device implementations includes support for an unmetered data connection such as 802.11 or Bluetooth PAN (Personal Area Network) profile, then, they:

  • [C-1-1] MUST support OTA downloads with offline update via reboot.

For device implementations that are launching with Android 6.0 and later, the update mechanism SHOULD support verifying that the system image is binary identical to expected result following an OTA. การใช้งาน OTA แบบบล็อกในโครงการอัปสตรีม Android Open Source ที่เพิ่มเข้ามาตั้งแต่ Android 5.1 เป็นไปตามข้อกำหนดนี้

นอกจากนี้ การใช้งานอุปกรณ์ควรรองรับ การอัปเดตระบบ A/B AOSP ใช้คุณลักษณะนี้โดยใช้การควบคุมการบูต HAL

หากพบข้อผิดพลาดในการใช้งานอุปกรณ์หลังจากที่เปิดตัว แต่ภายในอายุการใช้งานของผลิตภัณฑ์ที่เหมาะสม ซึ่งพิจารณาจากการปรึกษาหารือกับทีมความเข้ากันได้ของ Android เพื่อส่งผลต่อความเข้ากันได้ของแอปพลิเคชันบุคคลที่สาม ดังนั้น:

  • [C-2-1] ผู้ใช้งานอุปกรณ์จะต้องแก้ไขข้อผิดพลาดผ่านการอัพเดตซอฟต์แวร์ที่มีอยู่ซึ่งสามารถนำไปใช้ตามกลไกที่อธิบายไว้

Android มีคุณลักษณะที่อนุญาตให้แอป Device Owner (ถ้ามี) สามารถควบคุมการติดตั้งการอัปเดตระบบได้ หากระบบย่อยการอัปเดตระบบสำหรับอุปกรณ์รายงาน android.software.device_admin พวกเขา:

  • [C-3-1] ต้องใช้ลักษณะการทำงานที่อธิบายไว้ในคลาส SystemUpdatePolicy

12. บันทึกการเปลี่ยนแปลงเอกสาร

หากต้องการสรุปการเปลี่ยนแปลงข้อกำหนดความเข้ากันได้ในรุ่นนี้:

For a summary of changes to individuals sections:

  1. การแนะนำ
  2. ประเภทอุปกรณ์
  3. ซอฟต์แวร์
  4. Application Packaging
  5. มัลติมีเดีย
  6. Developer Tools and Options
  7. ความเข้ากันได้ของฮาร์ดแวร์
  8. ประสิทธิภาพและพลัง
  9. รูปแบบการรักษาความปลอดภัย
  10. Software Compatibility Testing
  11. Updatable Software
  12. Document Changelog
  13. ติดต่อเรา

12.1. บันทึกการเปลี่ยนแปลง เคล็ดลับในการดู

Changes are marked as follows:

  • ซีดีดี
    Substantive changes to the compatibility requirements.

  • เอกสาร
    Cosmetic or build related changes.

For best viewing, append the pretty=full and no-merges URL parameters to your changelog URLs.

13. ติดต่อเรา

คุณสามารถเข้าร่วม ฟอรัมความเข้ากันได้ของ Android และขอคำชี้แจงหรือแจ้งปัญหาใด ๆ ที่คุณคิดว่าเอกสารนี้ไม่ครอบคลุม