Android Camera Image Test Suite (ITS) is part of Android Compatibility Test Suite (CTS) Verifier and includes tests that verify image content. CTS Verifier supports ITS test automation with Camera ITS-in-a-box; support for manual tests covers all Android device form factors.
ITS-in-a-box includes the following benefits:
- Automation. No human intervention is needed during the test.
- Easy troubleshooting. Consistency of test environment leads to fewer setup errors and increases reproducibility.
- Efficiency. Ability to retry for individual camera/scene improves test execution efficiency.
ITS-in-a-box consists of a plastic box that is laser cut from computer-aided design (CAD) drawings, a chart tablet, and a device under test (DUT). You can use the wide field-of-view (WFoV) ITS-in-a-box, which is capable of testing both WFoV (FoV > 90 degrees) and RFoV (FoV < 90 degrees) cameras, or the regular field-of-view (RFoV) ITS-in-a-box.
To get started with the Camera ITS-in-a-box:
- Purchase or build a WFoV or RFoV ITS-in-a-box.
- Configure a tablet with Camera ITS software.
- Run tests.
- Get results from the DUT.
Configuring the tablet
This section provides step-by-step instructions for setting up a
tablet for use with the
Camera ITS tests located in the
CameraITS directory. These instructions use a Pixel C as
an example tablet. For information on tablet
requirements and recommendations, see Tablet
Note: The Camera ITS Python scripts
automatically set the following options on the tablet for you:
Settings > Display > Sleep > After 30 minutes of inactivity
Adaptive brightness > OFF
- Charge the tablet and power it on. If prompted to set up an account, skip it (Camera ITS does not require any account paired with the tablet).
- Update the tablet to Android 7.0 or higher. Android 6.x and lower versions do not support Camera ITS.
- Enable developer mode.
- Return to Settings and select Developer options.
- Stay awake
- USB debugging (This allows the host to run the tablet in debug mode. When you connect the tablet to the host for the first time, the tablet prompts Allow USB debugging? If the tablet doesn't display the debug prompt, disconnect then reconnect the tablet.)
- Automatic system updates
- Verify apps over USB
- Determine DUT and chart IDs by running
$ adb devicesto list available devices. To determine
chart_id, plug and unplug devices and observe the devices that connect and disconnect.
- Perform three test runs to suppress hints and user prompts that can obscure
charts on the tablet screen.
- Position the tablet face up on a table (don't attach the tablet to the back panel of the box).
- Run the following command:
python tools/run_all_tests.py device=$device_id camera=0 chart=$chart_id scenes=2,3Scenes 2 and 3 require the tablet to display an image, so the tablet prompts Allow Drive to access photos, media, and files on your device?. Clear this prompt (and prevent future prompts) by pressing Allow.
- Run the command again. The tablet prompts Keep a copy of this file? and suggests Google Drive. Clear this prompt (and prevent future prompts) by pressing the Drive icon then Cancel for upload to drive.
- Finally, run
tools/run_all_tests.pyand confirm that scenes change automatically as the script cycles through different scenes. While most tests fail (as the camera isn't pointed at the chart), you can verify that the tablet correctly cycles through the scenes without displaying any prompts or other popups on the screen.
Before running the ITS-in-a-box, ensure that your test setup includes the following hardware and software:
- One (1) ITS-in-a-box
- One (1) high resolution 10" tablet for displaying scenes, S/N: 5811000011
- One (1) DUT that has the CTS Verifier
7.0_8+ app installed. Example DUT:
- One (1) Pixel NOF26W for the back camera(0) testing, S/N: FA6BM0305016. To
install the CTS Verifier app, unzip
adb -s FA6BM0305016 install -r -g android-cts-verifier/CtsVerifier.apk
- One (1) Pixel NOF26W for the back camera(0) testing, S/N: FA6BM0305016. To install the CTS Verifier app, unzip
Running tablet-based scenes
To run scenes 0 to 4, 6, and scene_change on the back camera:
python tools/run_all_tests.py camera=0
You can retry scenes for a single camera:
- To retry scenes on a single camera:
python tools/run_all_tests.py device=FA6BM0305016 camera=0 scenes=3,4
Running scene 5
Scene 5 requires special setup with specific lighting (for details, refer to
CameraITS.pdf in CTS Verifier, which you can download at
Compatibility Test Suite Downloads).
You must run scene 5 separately
(outside of the box).
To run scene 5 for front and back cameras on a single device:
python tools/run_all_tests.py device=FA6BM0305016 camera=0 scenes=5
python tools/run_all_tests.py device=FA6BM0305016 camera=1 scenes=5
You can view results during testing and save the completed results as a report.
- View results. To save Camera ITS results as a report:
- Press Pass and save the report.
Figure 3. Camera ITS report
- Pull reports from the device:
adb -s FA6BM0305016 pull /sdcard/verifierReports
- Unzip the report file and view
Figure 4. Camera ITS reports
- Press Pass and save the report.
Tablets must have a display size of around 10 inches with a screen resolution
greater than 1920 x 1200 pixels. The
brightness value must be
config.yml according to the tablet model.
The table below lists the recommended tablets for ITS testing along with the Android release
versions for the DUT the tablets work with.
Galaxy Tab A8
|10.5||1920 x 1200||9.72 x 6.37 x 0.27||192||8||Android 13+|
|11||2560 x 1600||10.03 x 6.55 x 0.27||1536||11||Android 12+|
Tab M10 Plus
|10.3||1920 x 1200||9.61 x 6.03 x 0.32||192||8||Android 12+|
Galaxy Tab A7
|10.4||2000 x 1200||9.75 x 6.2 x 0.28||192||8||Android 12+|
Hi9 Air 10.1
|10.1||2560 x 1600||9.52 x 6.77 x 0.31||192||8||Android 7+|
|9.7||2048 x 1536||9.47 x 6.44 x 0.28||192||8||Android 7+|
|10.8||2560 x 1600||10.18 x 6.76 x 0.29||192||8||Android 7+|
|10.2||2560 x 1800||9.53 x 7.05 x 0.28||96||8||Android 7+|
|10.1||2560 x 1600||10 x 6.57 x 0.24||192||8||Android 7+|
Frequently asked questions (FAQs)
Q1: How do I determine which test rigs I need for my device?
RFoV ITS-in-a-box revision 1 tests RFoV cameras for scene 0 to scene 4
tests in the
CameraITS/tests directory. RFoV is defined as
60° < FoV < 90°.
For larger FoV cameras, the lights might appear in the images or the charts
might cover too small an area in the FoV, affecting test results.
The WFoV ITS-in-a-box
revision 2 tests WFoV cameras
for scene 0 to scene 4 tests in the
CameraITS/tests directory. WFoV is defined as
FoV >= 90°.
It's functionally identical to revision 1, but larger. The revision 2 test rig
can test both RFoV and WFoV cameras in Android 9 and higher.
sensor fusion box tests the camera/gyroscope timing
offset and multi-camera systems frame sync with tests in
scenes=sensor_fusion. A camera/gyroscope timing offset of less
than 1 ms is required for the
REALTIME feature flag and
Multi-camera devices can be tested with a single rig for static ITS tests
and a sensor fusion rig if the camera has the
A set of example configurations is provided in the table below.
|Example||Camera FoVs||REALTIME?||Recommended rigs||Notes|
|1||75°||No||Rev 1||Android 7.0 or higher|
|2||75°||Yes||Rev 1 + sensor fusion||Android 9 or higher|
|3||75° + 95°||Yes||Rev 2 + sensor fusion||Android 9 or higher|
Q2: How do I designate which test rig is in use?
To designate the correct test rig, ensure that the chart distance parameter is correct. The rev1 test rig (RFoV) has chart distance of 31 cm, and the rev2 rig (WFoV) has chart distance of 22 cm. By default the chart distance is set to 31 cm.
Android 10 to Android 11To identify the correct test rig in Android 10 through 11 add the
distflag at the command line. The default value for
31. Run the following command to change the
python tools/run_all_tests.py ... chart=# dist=22
Android 12To identify the correct test rig in Android 12 you can edit the config.yml file to change the
edit config.yml chart_distance: 31.0 → chart_distance: 22.0
Q3: How do I control the tablet brightness?
By default, the tablet brightness is set to 96.
To change the brightness on tablets running Android 7.0 through Android 9, run:
edit tools/wake_up_screen.py DISPLAY_LEVEL=96 → DISPLAY_LEVEL=192
To change the brightness on tablets running Android 10 through
value can be changed at the command line by adding the
python tools/run_all_tests.py device=# camera=# chart=# brightness=192
To change the brightness on tablets running Android 12, run:
edit config.yml brightness: 96 → brightness: 192
Q4: How do I debug a single test?
Tests can be run individually for debugging purposes, but the results aren't
CtsVerifier.apk unless the entire scene is run.
To run an individual scene in Android 11 and lower:
- Load a scene by adding the
python tools/run_all_tests.py device=# camera=# chart=# scenes=#
Press Control+C to halt tests after the scene is logged as loaded to
If the correct scene is already on the screen, wake up the screen:
python tools/wake_up_screen.py screen=#
Run an individual test.
python tests/scene#/test_*.py device=# camera=#
Plots are then generated in the local directory and
stderrare printed to the screen.
To get more information for debugging, add
python tests/scene#/test_*.py device=# camera=# debug=True
Results are printed to the local screen and images are saved in the local directory
instead of the generated
/tmp/tmp### directory when
To run an individual scene in Android 12:
edit config.yml camera: <camera-id> → camera: 0 scene: <scene-name> → scene: scene1_1
Run the individual test.
python tools/run_all_tests.py -c config.yml --test_bed TEST_BED_TABLET_SCENES
Results are printed in the
/tmp/logs/mobly/TEST_BED_TABLET_SCENES/ directory sorted
by run time.
Q5: Why do I need to run failing tests as an entire scene instead of rerunning tests individually?
Tests can be run individually for debugging purposes, but the results are not
CtsVerifier.apk unless the entire scene is run.
Camera ITS ensures that third-party apps have a compatible camera interface. Similar to a unit test, each test stresses a single specification in the camera. To catch unreliable behavior, these tests are expected to pass as a group for an entire scene. For example, although a single unreliable test may pass a rerun of an entire scene, it's difficult for multiple unreliable tests to pass.
As an extreme example, consider the case where there are 10 tests in a scene
that each has a 50% probability of returning
PASS. By running each
test individually, there's a high chance that an operator can get the camera to
pass Camera ITS. However, if the tests are run in the aggregate as a scene,
there's only a 0.1% chance that the scene will pass.
Q6: How do I run a single scene or reorder the run scenes?
By default, the script
tools/run_all_tests.py runs all scenes
in order. However, scenes can be run individually or in a specified order and
be reported to
To run an individual scene (for example, scene 2) or run more than one scene in a specific order in Android 11 or lower:
python tools/run_all_tests.py device=# camera=# chart=# scenes=2
python tools/run_all_tests.py device=# camera=# chart=# scenes=3,2
To run an individual scene or run more than one scene in a specific order in Android 12:
python tools/run_all_tests.py scenes=2
python tools/run_all_tests.py scenes=3,2
The additional parameters are set in the
Q7: A number of scene 1 tests fail with the tablet setup but pass with a paper chart. What's wrong?
Ensure that the tablet and test environment meet the following specifications.
Make sure that the tablet meets the following specifications:
- Display size (inches): 10 inches
- Display size (pixels): greater than 1920 x 1200 pixels
For more details, see Tablet requirements.
Tests may not obtain correct results if the tablet display brightness is too low.
For more details, see How do I control the tablet brightness?
Box lighting level (requires lux meter)
Make sure that the target lux value at tablet opening is between 100 and 300.
If the lux level is too high,
FAIL. If the lux level is too low, multiple tests fail.
Q8: How do I debug sensor fusion tests?
Ensure that you're in a
groups | egrep ‘dialout'
Ensure that the sensor fusion controller is connected by determining if Microchip Technology is connected to the USB port.
lsusb … Bus 003 Device 004: ID 04d8:fc73 Microchip Technology, Inc. …
Run the test multiple times to get a distribution of test attempts with the following commands.
In Android 11 or lower:
python tools/run_sensor_fusion_box.py device=A camera=0 num_runs=10 rotator=default
In Android 12:
python tools/run_sensor_fusion_box.py num_runs=10
The additional parameters are set in the
Run outputs are in the
/tmp/tmp###folder created under the
#is the run number. Common reasons for failure are:
- The phone isn't centered properly.
- Not enough features are found in the image (often a FoV or lighting issue).
- The returned
FAILis valid, and the timing offset between the camera and the gyroscope must be corrected.
Q9: What information should I include when reporting a testing bug?
When reporting a testing bug, include the generated files and images for the test.
- If you ran the test through
tools/run_all_tests.py, attach a zipped
/tmp/directory to the bug.
- If you ran the test by itself, attach all of the screen outputs and generated images to the bug.
Also include a bug report. After the test in question fails, use the following command to generate a bug report and attach the generated zip file to the bug.
adb -s device_id bugreport
Q10: How do I remove the navigation bars on 16:10 tablets that obscure the scene?
For tablets with 16:10 (or greater) aspect ratios, the navigation bar can obscure part of the scene. To hide the navigation bar use the following adb command for the tablet.
adb -s device_id shell settings put global policy_control immersive.full=*