कक्षा सूचकांक
ये एपीआई वर्ग हैं। सभी एपीआई पैकेज देखें।
ए
AaptParser | कक्षा जो 'एएपीटी डंप बैजिंग' के आउटपुट को पार्स करके एपीके से जानकारी निकालती है। |
AaptParser.AaptVersion | एपीके फाइलों को पार्स करने के लिए उपयोग किए जाने वाले एएपीटी संस्करण के लिए विकल्पों की संख्या। |
अबी | एबीआई का प्रतिनिधित्व करने वाला एक वर्ग। |
अबीफॉर्मेटर | अबी के लिए उपयोगिता वर्ग। |
AbiUtils | डिवाइस एबीआई को संभालने के लिए उपयोगिता वर्ग |
सारहोस्ट मॉनिटर | मेजबान स्वास्थ्य निगरानी के लिए विशिष्ट वर्ग। |
सारXmlParser | एक्सएमएल फाइलों को पार्स करने के लिए हेल्पर बेस क्लास |
सारXmlParser.ParseException | अगर XML इनपुट को पार्स नहीं किया जा सका तो फेंक दिया गया |
AcloudConfigParser | सहायक वर्ग जो Acloud कॉन्फ़िगरेशन को पार्स करता है (क्लाउड डिवाइस इंस्टेंस शुरू करने के लिए उपयोग किया जाता है)। |
AcloudConfigParser.AcloudKeys | कुंजी के सेट जिन्हें कॉन्फ़िगरेशन से खोजा जा सकता है। |
कार्रवाई में प्रगति | सामान्य कार्रवाई चल रही है। |
एक्टिवट्रेस | मुख्य वर्ग एक सक्रिय ट्रेस का वर्णन और प्रबंधन करने में मदद करता है। |
एक्टिविटीस्टैटस चेकर | मॉड्यूल के अंत में चल रही बची हुई गतिविधियों के लिए स्टेटस चेकर। |
AdbRootElevator | एक AutoCloseable जो जरूरत पड़ने पर निर्मित होने पर adb रूट को सक्षम करता है और पूर्ण होने पर रूट स्थिति को पुनर्स्थापित करता है। |
AdbStopServerPreparer | एडीबी परीक्षण चलाने से पहले और बाद में मेजबान पर एडीबी सर्वर को रोकने के लिए लक्षित तैयारकर्ता। |
AdbUtils | एडीबी संचालन के लिए एक उपयोगिता वर्ग। |
आफ्टरक्लासविथइन्फो | AfterClass के समान गारंटी लेकिन एनोटेटेड विधि को TestInformation पैरामीटर की आवश्यकता होनी चाहिए। |
एग्रीगेटपोस्टप्रोसेसर | एक मीट्रिक एग्रीगेटर जो बहु-पुनरावृत्ति परीक्षण रन के दौरान एकत्र किए गए संख्यात्मक मीट्रिक के लिए न्यूनतम, अधिकतम, माध्य, विचरण, मानक विचलन, कुल, गणना और वैकल्पिक रूप से प्रतिशतक देता है, उन्हें युगल के रूप में मानता है। |
AllTestAppsInstallSetup | एक ITargetPreparer जो डिवाइस पर IDeviceBuildInfo#getTestsDir() फ़ोल्डर से सभी ऐप्स इंस्टॉल करता है। |
AltDir व्यवहार | विभिन्न परीक्षण आर्टिफैक्ट इंस्टॉलर/पुशर के लिए वैकल्पिक निर्देशिका व्यवहार को परिभाषित करने के लिए एक एनम |
AndroidJUnitTest | एक टेस्ट जो android.support.test.runner.AndroidJUnitRunner का उपयोग करके दिए गए डिवाइस पर एक इंस्ट्रूमेंटेशन टेस्ट पैकेज चलाता है। |
AoaTargetPreparer | ITargetPreparer जो Android Open Accessory (AOAv2) प्रोटोकॉल का उपयोग करके क्रियाओं की एक श्रृंखला (जैसे क्लिक और स्वाइप) निष्पादित करता है। |
ऐपबिल्डइन्फो | एक IBuildInfo जो एक Android एप्लिकेशन और उसके परीक्षण पैकेज का प्रतिनिधित्व करता है। |
ऐपडिवाइसबिल्डइन्फो | यह वर्ग बहिष्कृत है। सीधे IDeviceBuildInfo का उपयोग करें। |
ऐपसेटअप | एक ITargetPreparer जो एपीके और उसके परीक्षणों को स्थापित करता है। |
AppVersionFetcher | डिवाइस से ऐप संस्करण स्ट्रिंग प्राप्त करने के लिए उपयोगिता वर्ग। |
AppVersionFetcher.AppVersionInfo | ऐप संस्करण जानकारी प्रकार। |
आर्क मॉड्यूल नियंत्रक | जब मॉड्यूल नियंत्रक किसी दिए गए आर्किटेक्चर से मेल नहीं खाता है तो परीक्षण नहीं चलाएगा। |
ArgsOptionParser | पार्स किए गए कमांड लाइन तर्कों से Option फ़ील्ड पॉप्युलेट करता है। |
ArrayUtil | सरणियों के लिए उपयोगिता विधियाँ |
ArtChrootPreparer | एआरटी परीक्षणों के लिए क्रोट निर्देशिका बनाएँ। |
कला परीक्षण | |
आर्ट रन टेस्ट | एआरटी रन-टेस्ट चलाने के लिए एक टेस्ट रनर। |
ArtRunTest.AdbShellCommandException | एडीबी शेल कमांड के निष्पादन के दौरान हुई त्रुटि की रिपोर्ट करने के लिए एक अपवाद वर्ग। |
ATestFileSystemLogSaver | विशिष्ट पथ में लॉग को सहेजने के लिए ATest द्वारा इस LogSaver वर्ग का उपयोग किया जाता है। |
AtestRunner | ITestSuite का कार्यान्वयन |
एट्रेस कलेक्टर | एक IMetricCollector जो एक परीक्षण के दौरान ट्रेस चलाता है और परिणाम एकत्र करता है और उन्हें मंगलाचरण में लॉग करता है। |
एट्रेस रन मेट्रिक कलेक्टर | परीक्षण डिवाइस से दी गई निर्देशिका के तहत सभी परीक्षण निर्देशिका से निशान एकत्र करता है, परीक्षण निर्देशिका लॉग करता है और परीक्षण निर्देशिका के तहत ट्रेस फ़ाइलों को पोस्ट करता है और मेट्रिक्स को एकत्र करता है। |
AutoLogCollector | गणन वर्णन करता है कि किस कलेक्टर को हार्नेस द्वारा स्वचालित रूप से नियंत्रित किया जा सकता है। |
स्वचालित रिपोर्टर | क्लास जो ट्रेडफेड ऑटोमेटेड रिपोर्टर्स से मैपिंग को परिभाषित करती है। |
औसतपोस्टप्रोसेसर | मेट्रिक्स की सूची के औसत की गणना करने वाले पोस्ट प्रोसेसर का कार्यान्वयन। |
बी
बैकग्राउंडडिवाइसएक्शन | कार्रवाई रद्द होने तक दिए गए डिवाइस पर आवश्यकतानुसार दोहराते हुए कमांड चलाता है। |
बेसडिवाइसमैट्रिककलेक्टर | IMetricCollector का मूल कार्यान्वयन जो onTestRunStart(com.android.tradefed.device.metric.DeviceMetricData) और ERROR(/#onTestRunEnd(com.android.tradefed.device.metric.DeviceMetricData,Map)) पर संग्रह शुरू और बंद करने की अनुमति देता है। |
बेसएम्यूलेटरप्रिपेयर | स्थानीय एमुलेटर लॉन्च करने के लिए सामान्य तैयारीकर्ता। |
बेसहोस्टJUnit4Test | होस्ट JUnit4 स्टाइल टेस्ट चलाने के लिए बेस टेस्ट क्लास। |
बेसलेवलेडलॉगआउटपुट | ILeveledLogOutput के लिए एक आधार कार्यान्वयन जो कुछ टैग्स को उनके नाम या घटकों के आधार पर फ़िल्टर करने की अनुमति देता है। |
बेस मॉड्यूल नियंत्रक | IModuleController का मूल कार्यान्वयन जिसे यह जाँचने के लिए लागू किया जाना चाहिए कि कोई मॉड्यूल चलना चाहिए या नहीं। |
बेसमल्टी टारगेट प्रिपेयरर | IMultiTargetPreparer का मूल कार्यान्वयन जो ऑब्जेक्ट को अक्षम करने की अनुमति देता है। |
बेसपोस्ट प्रोसेसर | आधार IPostProcessor जिसे हर कार्यान्वयन में विस्तारित किया जाना चाहिए। |
बेसरीट्रीडिसीजन | IRetryDecision का बुनियादी कार्यान्वयन। |
बेसस्ट्रीमलॉगर <ओएस आउटपुटस्ट्रीम का विस्तार करता है> | एक ILeveledLogOutput जो लॉग संदेशों को आउटपुट स्ट्रीम और स्टडआउट पर निर्देशित करता है। |
BaseTargetPreparer | ITargetPreparer के लिए आधार कार्यान्वयन वर्ग जो यह नियंत्रित करने की अनुमति देता है कि वस्तु अक्षम है या नहीं। |
बेसटेस्टसुइट | नए सुइट सिस्टम के साथ संगतता परीक्षण सूट चलाने के लिए एक परीक्षण। |
बैटरी नियंत्रक | उपयोगिता वर्ग जो किसी डिवाइस की बैटरी चार्जिंग स्थिति को नियंत्रित करने की अनुमति देता है। |
बैटरी रिचार्ज डिवाइस रिकवरी | जब डिवाइस की बैटरी का स्तर किसी दिए गए थ्रेशोल्ड के नीचे चला जाता है, तो कमांड को ट्रिगर करने की अनुमति दें। |
बैटरी तापमान | |
बैटरी अनुपलब्ध डिवाइस पुनर्प्राप्ति | रिकवरी चेकर जो बैटरी स्तर उपलब्ध नहीं होने पर कॉन्फ़िगरेशन को ट्रिगर करेगा। |
बिफोरक्लासविथइन्फो | पहले क्लास के समान गारंटी लेकिन एनोटेटेड विधि को BeforeClass पैरामीटर की आवश्यकता TestInformation चाहिए। |
बाइनरीस्टेट | एनम एक इग्नोर नो-ऑप स्थिति के साथ चालू/बंद स्थिति रिकॉर्ड करता था। |
ब्लूटूथ कनेक्शन लेटेंसी कलेक्टर | कलेक्टर उपकरणों के लिए एक पूर्व-निर्धारित आँकड़े अवधि मीट्रिक कॉन्फ़िग पुश करेगा और प्रत्येक प्रोफ़ाइल के लिए ब्लूटूथ कनेक्शन अवधि एकत्र करेगा। |
ब्लूटूथकनेक्शनस्टेटकलेक्टर | यह संग्राहक BluetoothConnectionStateChanged मेट्रिक्स एकत्र करेगा और प्रत्येक प्रोफ़ाइल के लिए कनेक्शन स्थिति संख्या रिकॉर्ड करेगा। |
ब्लूटूथ कनेक्शनसफलता दरपोस्टप्रोसेसर | पोस्टप्रोसेसर का कार्यान्वयन जो ब्लूटूथ प्रोफाइल के लिए सफलता दर की गणना करता है मेट्रिक्स निर्दिष्ट करने के लिए "मीट्रिक-की-मैच" का उपयोग करें जिसमें न्यूमेरिक सरणी उदाहरण [0, 1, 2, 3, 0, 1, 2, 3] में ब्लूटूथ कनेक्शन स्थिति शामिल है। |
ब्लूटूथUtils | डिवाइस पर ब्लूटूथ इंस्ट्रुमेंटेशन को कॉल करने के लिए उपयोगिता कार्य डिवाइस साइड ब्लूटूथ इंस्ट्रुमेंटेशन कोड एओएसपी में यहां पाया जा सकता है: |
बूटस्ट्रैपबिल्डप्रोवाइडर | एक IDeviceBuildProvider जो परीक्षण उपकरण से जानकारी का निर्माण बूटस्ट्रैप करता हैयह आमतौर पर बाहरी रूप से आपूर्ति किए गए बिल्ड वाले उपकरणों के लिए उपयोग किया जाता है, अर्थात |
बूटस्ट्रैप सेवा फ़ाइल रिज़ॉल्वर लोडर | सर्विस लोडिंग सुविधा का उपयोग करके रिसॉल्वर लोड करता है। |
बग रिपोर्ट | बगरेपोर्ट फ़ाइलों के संदर्भों को धारण करने वाली वस्तु, फ्लैट बगरेपोर्ट और ज़िप्ड बगरेपोर्ट (बग्रेपोर्ट्ज़) के संगत। |
BugreportCollector | एक पास-थ्रू ITestInvocationListener जो कॉन्फ़िगर करने योग्य ईवेंट होने पर बग रिपोर्ट एकत्र करता है और फिर प्रत्येक बग रिपोर्ट एकत्र होने के बाद अपने बच्चों पर ITestInvocationListener#testLog को कॉल करता है। |
BugreportCollector.Filter | |
BugreportCollector.Freq | |
बगरेपोर्ट कलेक्टर। संज्ञा | |
BugreportCollector.विधेय | बग्रेपोर्ट कब कैप्चर करना है इसका वर्णन करने वाला एक पूर्ण विधेय। |
BugreportCollector.Relation | |
BugreportCollector.SubPredicate | |
BugreportzOnFailureCollector | जब कोई परीक्षण मामला विफल हो जाता है तो एक बग्रेपोर्ट्ज़ एकत्र करें। |
BugreportzOnTestCaseFailureCollector | एक रन में एक परीक्षण मामला विफल होने पर एक बग्रेपोर्ट्स एकत्र करें। |
बिल्ड एरर | प्रदान की गई बिल्ड चलाने में विफल होने पर फेंक दिया गया। |
बिल्डइन्फो | ITestDevice का सामान्य कार्यान्वयन जिसे IBuildInfo से जोड़ा जाना चाहिए। |
बिल्डइन्फोकी | बिल्ड इंफॉर्मेशन क्वेश्चन से संबंधित क्लास होल्डिंग एन्यूमरेशन। |
BuildInfoKey.BuildInfoFileKey | Enum सभी ज्ञात फ़ाइल प्रकारों का वर्णन करता है जिन्हें IBuildInfo.getFile(com.android.tradefed.build.BuildInfoKey.BuildInfoFileKey) के माध्यम से पूछताछ की जा सकती है। |
BuildInfoRecorder | एक ITargetPreparer जो बिल्ड जानकारी मेटा डेटा को निर्दिष्ट फ़ाइल में लिखता है। |
BuildInfoUtil | IBuildInfo में हेरफेर करने में मदद करने के लिए एक उपयोग वर्ग |
बिल्ड रिट्रीवल एरर | बिल्ड को परीक्षण के लिए पुनर्प्राप्त करते समय एक गंभीर त्रुटि हुई. |
बिल्डसीरियलाइज्ड वर्जन | कक्षा जिसमें सभी IBuildInfo का वर्तमान क्रमांकन संस्करण शामिल है। |
BuildTestsZipUtils | एंड्रॉइड बिल्ड सिस्टम द्वारा उत्पन्न परीक्षण ज़िप से संबंधित संचालन के लिए एक सहायक वर्ग |
बल्क ईमेलर | एक ईमेल प्रेषक उपयोगिता जो निम्नलिखित कॉन्फ़िगरेशन की अनुमति देती है: भेजा गया अंतराल, प्रारंभिक फट आकार, प्राप्तकर्ता और कुल संख्या संदेश। |
बंडलटूलयूटिल | उपयोगिता वर्ग जो deivce पर .apks को स्थापित करने के लिए बंडलटूल कमांड लाइन का उपयोग करता है। |
ByteArrayInputStreamSource | |
ByteArrayList | हल्के बाइट सरणी का प्रतिनिधित्व करने के लिए एक वर्ग। |
ByteArrayUtil | बाइट सरणी पर काम करने के लिए उपयोगिताएँ, उदाहरण के लिए, बाइट्स को पूर्णांक में बदलें। |
सी
CarModuleController | यह नियंत्रक गैर-ऑटोमोटिव उपकरणों पर परीक्षण मामलों के निष्पादन को रोकता है। |
CarryDnaeError | JUnit4 ढांचे के माध्यम से RuntimeException ले जाने के लिए आंतरिक DeviceNotAvailableException अपवाद। |
कैरी इंटरप्टेड अपवाद | परीक्षण चरण टाइमआउट ट्रिगर होने पर फेंक दिया जाता है और एक इंटरप्टेड अपवाद को परीक्षण निष्पादन थ्रेड से मंगलाचरण निष्पादन थ्रेड तक ले जाने की आवश्यकता होती है। |
सीडीएमएडिवाइसफ्लैशर | एक वर्ग जो सीडीएमए रेडियो के साथ भौतिक एंड्रॉइड डिवाइस पर छवि को फ्लैश करता है। |
CecControllerTokenProvider | उपभोक्ता इलेक्ट्रॉनिक्स नियंत्रण (सीईसी) संबंधित टोकन के लिए टोकन प्रदाता। |
सेंट्रलडायरेक्टरीइन्फो | CentralDirectoryInfo एक वर्ग है जिसमें ज़िप फ़ाइल के अंदर फ़ाइल/फ़ोल्डर की जानकारी होती है। |
चेकपेयरिंगप्रिपेयर | एक CompanionAwarePreparer जो प्राथमिक और साथी उपकरणों के बीच BT बॉन्डिंग को सत्यापित करता है |
सर्कुलरएट्रेसयूटिल | बंदर परीक्षण के दौरान एएनआर के मूल कारणों की पहचान करने के लिए मुख्य रूप से विकसित एक एट्रेस उपयोगिता। |
सर्कुलरबाइटएरे | एक निश्चित आकार की सरणी रखने के लिए डेटा संरचना जो एक गोलाकार बफर के रूप में संचालित होती है, और सरणी में सभी मानों के कुल योग को ट्रैक करती है। |
ClangCodeCoverageCollector | एक BaseDeviceMetricCollector जो क्लैंग कवरेज मापन को डिवाइस से हटा देगा और उन्हें परीक्षण कलाकृतियों के रूप में लॉग करेगा। |
क्लासनॉटफाउंड कॉन्फ़िगरेशन अपवाद | ConfigurationException जब किसी ऑब्जेक्ट की कक्षा नहीं मिलती है। |
ClassPathScanner | क्लासपाथ पर प्रविष्टियाँ ढूँढता है। |
ClassPathScanner.ClassNameFilter | एक IClassPathFilter जो जावा वर्ग के नामों को फ़िल्टर और रूपांतरित करता है। |
ClassPathScanner.ExternalClassNameFilter | एक ClassNameFilter जो आंतरिक कक्षाओं को अस्वीकार करता है |
ClassPathScanner.IClassPathFilter | क्लासपाथ एंट्री पाथ के लिए फ़िल्टर FileFilter के बाद नमूनों |
क्लॉकवर्कयूटिल्स | मल्टी-डिवाइस लॉजिक साझा करने के लिए क्लॉकवर्क यूटिलिटी |
बंद करने योग्य ट्रेसस्कोप | एक स्कोप्ड क्लास जो कोशिश-के-संसाधनों के माध्यम से ट्रेसिंग सेक्शन की रिपोर्ट करने की अनुमति देती है |
क्लस्टरबिल्डइन्फो | टीएफसी से पाइप किए गए निर्माण के लिए एक IBuildInfo क्लास। |
क्लस्टरबिल्डप्रोवाइडर | TFC परीक्षण संसाधनों को डाउनलोड करने के लिए एक IBuildProvider । |
क्लस्टर क्लाइंट | TFC बैकएंड के साथ इंटरैक्ट करने के लिए एक IClusterClient कार्यान्वयन। |
क्लस्टर कमांड | एक वर्ग जो TF क्लस्टर से प्राप्त कार्य का प्रतिनिधित्व करता है। |
ClusterCommand.RequestType | |
क्लस्टर कमांड.स्टेट | TF क्लस्टर में कमांड की स्थिति। |
क्लस्टर कमांड कॉन्फिगबिल्डर | क्लस्टर कमांड के लिए कॉन्फ़िगरेशन फ़ाइल बनाने के लिए एक वर्ग। |
क्लस्टर कमांडइवेंट | अपलोड करने के लिए क्लस्टर कमांड इवेंट्स को एनकैप्सुलेट करने के लिए एक क्लास। |
क्लस्टर कमांडइवेंट.बिल्डर | |
क्लस्टर कमांडइवेंट.टाइप | |
क्लस्टर कमांड लॉन्चर | एक सबप्रोसेस TF के माध्यम से TFC से कमांड लॉन्च करने के लिए एक IRemoteTest क्लास। |
क्लस्टर कमांड शेड्यूलर | टीएफसी (ट्रेडफेड क्लस्टर) का समर्थन करने के लिए एक ICommandScheduler । |
क्लस्टर कमांड स्थिति | एक वर्ग जो राज्य का प्रतिनिधित्व करता है और TF क्लस्टर से कमांड के रद्द होने का कारण बताता है। |
क्लस्टरडिवाइसइन्फो | अपलोड करने के लिए क्लस्टर डिवाइस जानकारी को एनकैप्सुलेट करने के लिए एक वर्ग। |
क्लस्टरडिवाइसइन्फो.बिल्डर | |
क्लस्टर डिवाइस मॉनिटर | एक IDeviceMonitor कार्यान्वयन जो ट्रेडफेड क्लस्टर सेवा के परिणामों की रिपोर्ट करता है। |
ClusterEventUploader <टी IClusterEvent > का विस्तार करता है | ClusterEventUploader वर्ग, जो IClusterEvent को TFC पर अपलोड करता है। |
क्लस्टरहोस्टइवेंट | अपलोड किए जाने वाले क्लस्टर होस्ट इवेंट्स को एनकैप्सुलेट करने के लिए एक क्लास। |
क्लस्टरहोस्टइवेंट.बिल्डर | |
क्लस्टरहोस्टइवेंट.होस्टइवेंटटाइप | विभिन्न प्रकार के होस्ट इवेंट की गणना। |
ClusterHostUtil | वैश्विक कॉन्फ़िगरेशन उदाहरण, होस्ट जानकारी इत्यादि प्राप्त करने के लिए टीएफ क्लस्टर के लिए स्थिर उपयोग कार्य। |
क्लस्टरलॉगसेवर | TFC में टेस्ट आउटपुट अपलोड करने के लिए एक ILogSaver क्लास। |
ClusterLogSaver.FilePickingरणनीति | फ़ाइल चयन रणनीतियाँ। |
क्लस्टर विकल्प | |
कोडकवरेज टेस्ट | एक टेस्ट जो किसी दिए गए डिवाइस पर इंस्ट्रूमेंटेशन टेस्ट पैकेज चलाता है और कोड कवरेज रिपोर्ट तैयार करता है। |
कलेक्टिंगबाइटआउटपुट रिसीवर | एक IShellOutputReceiver जो पूरे शेल आउटपुट को byte[] में एकत्र करता है। |
आउटपुट रिसीवर एकत्रित करना | एक IShellOutputReceiver जो पूरे शेल आउटपुट को एक String में एकत्र करता है। |
कलेक्टिंग टेस्ट लिस्टनर | एक ITestInvocationListener जो सभी परीक्षा परिणाम एकत्र करेगा। |
कलेक्टर हेल्पर | कई जगहों पर आवश्यक कुछ IMetricCollector संचालन करने के लिए सहायक। |
CommandFileParser | फ़ाइल के लिए पार्सर जिसमें कमांड लाइन का सेट होता है। |
CommandFileParser.CommandLine | |
कमांड इंटरप्टर | ट्रेडफेडरेशन कमांड को बाधित करने या अबाधित के रूप में चिह्नित करने की अनुमति देने वाली सेवा। |
कमांडलाइनबिल्डइन्फोबिल्डर | उपयोगिता का मतलब कमांड लाइन से सामान्य बिल्ड सूचना तर्कों को कैप्चर करना और उनसे IBuildInfo बनाना है। |
कमान विकल्प | ICommandOptions का कार्यान्वयन। |
कमांडऑप्शन गेट्टर | सेवा कार्यान्वयन जो किसी दिए गए मंगलाचरण के कमांड विकल्प मान लौटाता है। |
कमान परिणाम | एक कमांड का परिणाम शामिल है। |
कमांडरनर | एक वैकल्पिक ट्रेडफेडरेशन प्रविष्टि बिंदु जो कमांड लाइन आर्ग्युमेंट्स में निर्दिष्ट कमांड चलाएगा और फिर बाहर निकल जाएगा। |
कमांडरनर.एग्जिटकोड | त्रुटि कोड जिनसे बाहर निकलना संभव है। |
कमांड शेड्यूलर | सभी उपलब्ध उपकरणों पर ट्रेडफेडरेशन कमांड चलाने के लिए शेड्यूलर। |
CommandScheduler.HostState | मेजबान की विभिन्न स्थिति की गणना |
कमांडस्टेटस | एक समयबद्ध ऑपरेशन की स्थिति का प्रतिनिधित्व करता है। |
कमांडस्टैटसहैंडलर | कॉल की स्थिति की निगरानी और अद्यतन करने में मदद करने वाला हैंडलर। |
कॉमनलॉगRemoteFileUtil | यह उपयोगिता सामान्य फ़ाइलों के रिमोट लॉग फ़ेचिंग लॉजिक के लिए विभिन्न रिमोट डिवाइस प्रतिनिधित्व में कोड दोहराव से बचने की अनुमति देती है। |
CommonLogRemoteFileUtil.KnownLogFileEntry | दूरस्थ उपकरणों के लिए ज्ञात लॉग प्रविष्टि का प्रतिनिधित्व। |
साथी आवंटक | बेस क्लास जो साथी डिवाइस को आवंटित करने और मुक्त करने का ख्याल रखता है साथी डिवाइस आवंटित करने के लिए आवश्यक मानदंड का वर्णन करने के लिए |
CompanionAwarePreparer | एक ITargetPreparer जो पहले से आवंटित साथी डिवाइस प्राप्त करने के तर्क को समाहित करता है। |
CompanionAwareTest | बेस टेस्ट क्लास जो साथी डिवाइस को प्राप्त करने और जांचने के बॉयलरपेट को समाहित करता है आवंटित साथी को पुनः प्राप्त करने के लिए उपवर्ग |
सहयोगी डिवाइस ट्रैकर | साथी उपकरणों को आवंटित करने और मुक्त करने के लिए एक वर्ग |
CompanionRunCommandTargetPreparer | एक ITargetPreparer जो आवंटित साथी डिवाइस पर निर्दिष्ट आदेश चलाता है |
साथी टेस्ट ऐप इंस्टाल सेटअप | एक ITargetPreparer जो एक आवंटित साथी डिवाइस पर एक IDeviceBuildInfo#getTestsDir() फ़ोल्डर से एक या अधिक ऐप्स इंस्टॉल करता है। |
CompileBootImageWithSpeedTargetPreparer | कंपाइलर फ़िल्टर 'गति' के साथ बूट क्लासपाथ और सिस्टम सर्वर को पुन: संकलित करता है। |
हालत विफलता मॉनिटर | मंगलाचरण से किसी भी विफलता के लिए निगरानी करें। |
कंडीशन प्रायोरिटीब्लॉकिंग क्यू <टी> | ERROR(/PriorityBlockingQueue) के साथ एक थ्रेड-सेफ क्लास - जैसे ऑपरेशन जो एक निश्चित स्थिति से मेल खाने वाली वस्तुओं को पुनः प्राप्त कर सकते हैं। |
कंडीशनप्रायोरिटीब्लॉकिंग क्यू। ऑलवेजमैच <टी> | एक ConditionPriorityBlockingQueue.IMatcher जो किसी भी वस्तु से मेल खाता है। |
कंडीशनप्रायोरिटीब्लॉकिंगक्यू.आईमैचर <टी> | यह निर्धारित करने के लिए एक इंटरफ़ेस कि क्या तत्व किसी प्रकार की स्थिति से मेल खाते हैं। |
ConfigCompleter | हमारे TF कॉन्फ़िगरेशन के लिए Completer का कार्यान्वयन। |
विन्यास | एक ठोस IConfiguration कार्यान्वयन जो लोड किए गए कॉन्फ़िगरेशन ऑब्जेक्ट को मानचित्र में संग्रहीत करता है। |
कॉन्फ़िगरेशनडिफ़ | कॉन्फ़िगरेशन, उससे संबंधित वस्तुओं और उनके विकल्पों का रिकॉर्ड रखता है। |
कॉन्फ़िगरेशनडिफ़.ConfigObjectDef | किसी क्लासनाम के लिए जानकारी रखने के लिए वस्तु और उसके पास मौजूद उपस्थिति संख्या (उदाहरण के लिए यदि किसी कॉन्फ़िगरेशन में एक ही वस्तु दो बार होती है, तो पहले वाले के पास पहली उपस्थिति संख्या होगी)। |
कॉन्फ़िगरेशन डिस्क्रिप्टर | कॉन्फ़िगरेशन ऑब्जेक्ट जो कॉन्फ़िगरेशन के कुछ पहलू का ही वर्णन करता है। |
कॉन्फ़िगरेशन डिस्क्रिप्टर। लोकल टेस्ट रनर | Enum स्थानीय परीक्षण रनर को इंगित करने के लिए उपयोग किया जाता है। |
कॉन्फ़िगरेशन अपवाद | अगर कॉन्फ़िगरेशन लोड नहीं किया जा सका तो फेंक दिया गया। |
ConfigurationFactory | IConfiguration बनाने के लिए फैक्टरी। |
कॉन्फ़िगरेशनफ़ैक्टरी.ConfigLoader | IConfigDefLoader का कार्यान्वयन जो शामिल कॉन्फ़िगरेशन को एक रूट कॉन्फ़िगरेशन से ट्रैक करता है, और सर्कुलर शामिल पर एक अपवाद फेंकता है। |
कॉन्फ़िगरेशन फ़ैक्टरी। अपवाद लोडर | |
कॉन्फ़िगरेशनयूटिल | कॉन्फ़िगरेशन फ़ाइलों को संभालने के लिए उपयोगिता कार्य। |
कॉन्फ़िगरेशनXmlParserSettings | ConfigurationXmlParser के लिए सेटिंग्स को स्वीकार करने के लिए एक साधारण वर्ग इस वर्ग के लिए सेटिंग पास करने के लिए उपनाम अनिवार्य है। |
कॉन्फ़िगरेशनYamlParser | YAML स्टाइल ट्रेडफेड कॉन्फ़िगरेशन के लिए पार्सर |
ConfigUtil | statsd कॉन्फ़िगरेशन फ़ाइलों को बनाने, उनके साथ इंटरैक्ट करने और पुश करने के लिए उपयोगिता वर्ग। |
सांत्वना देना | मुख्य ट्रेडफेडरेशन कंसोल उपयोगकर्ता को इंटरैक्ट करने के लिए इंटरफ़ेस प्रदान करता है वर्तमान में संचालन का समर्थन करता है जैसे
|
कंसोल। ArgRunnable <टी> | एक run विधि के साथ एक Runnable जो एक तर्क ले सकता है |
कंसोल। कैप्चर लिस्ट | List<List<String>> के लिए एक सुविधा प्रकार |
कंसोलरीडरऑटपुटस्ट्रीम | एक OutputStream जिसका उपयोग System.out.print() को उपयोगकर्ता के LineReader unfinishedLine के साथ अच्छा खेलने के लिए किया जा सकता है। |
कंसोल रिजल्ट रिपोर्टर | परिणाम रिपोर्टर परीक्षण परिणामों को कंसोल पर प्रिंट करने के लिए। |
सामग्री प्रदाता हैंडलर | हैंडलर जो सामग्री प्रदाता इंटरैक्शन को सार करता है और विभिन्न कार्यों के लिए डिवाइस साइड सामग्री प्रदाता का उपयोग करने की अनुमति देता है। |
काउंटिंग टेस्ट रिजल्ट लिस्टनर | एक TestResultListener जो TestStatus द्वारा परीक्षणों की कुल संख्या को ट्रैक करता है |
काउंट टेस्ट केस कलेक्टर | किसी दिए गए IRemoteTest के लिए परीक्षण मामलों की संख्या की गणना करें और रिपोर्ट करें। |
कवरेज मापन फारवर्डर | एक प्लेसहोल्डर परीक्षण जो निर्माण प्रदाता से लॉगर को कवरेज माप अग्रेषित करता है। |
कवरेज विकल्प | कवरेज विकल्प रखने के लिए ट्रेडेड ऑब्जेक्ट। |
कवरेजऑप्शन.टूलचेन | |
सीपीयूथ्रॉटलिंग वेटर | एक ITargetPreparer जो तब तक प्रतीक्षा करता है जब तक कि सभी कोरों पर अधिकतम आवृत्ति उपलब्ध उच्चतम स्तर पर बहाल नहीं हो जाती |
CreateAvdPreparer | |
CreateUserPreparer | उपयोगकर्ता बनाने और अंत में इसे साफ करने के लिए लक्ष्य तैयारकर्ता। |
वर्तमान मंगलाचरण | एक वर्ग जो मंगलाचरण के भीतर कहीं भी उपयोगी वर्तमान मंगलाचरण जानकारी को ट्रैक करता है और प्रदान करता है। |
करेंट इनवोकेशन.इनवोकेशनइन्फो | कुछ विशेष नामित कुंजी जिन्हें हम हमेशा मंगलाचरण के लिए पॉप्युलेट करेंगे। |
करंट इनवोकेशन। आइसोलेशनग्रेड | अलगाव के स्तर का वर्णन करता है |
डी
DebugHostLogOnFailureCollector | संग्राहक जो परीक्षण मामले की विफलता होने पर होस्ट-साइड लॉग को इकट्ठा और लॉग करेगा। |
DefaultRemoteAndroidTestRunner | ट्रेडफेड उपयोग मामलों के लिए कुछ डिफ़ॉल्ट सेट करने के लिए ddmlib RemoteAndroidTestRunner का विस्तार। |
DefaultTestsZipInstaller | परीक्षण ज़िप इंस्टॉलर का एक डिफ़ॉल्ट कार्यान्वयन। |
प्रत्यायोजित मंगलाचरण निष्पादन | InvocationExecution एक्ज़ीक्यूशन जो एक अन्य ट्रेडफेड बाइनरी को निष्पादन का प्रतिनिधित्व करता है। |
निर्भरता रिज़ॉल्वर | एक नए प्रकार का प्रदाता जो एक परीक्षण के लिए सभी निर्भरताओं को प्राप्त करने की अनुमति देता है। |
डिवाइस आवंटन परिणाम | कमांड के आवंटन प्रयास के परिणामों का प्रतिनिधित्व करता है। |
डिवाइस आवंटन स्थिति | IDeviceManager परिप्रेक्ष्य से डिवाइस की आवंटन स्थिति का प्रतिनिधित्व करता है |
डिवाइस उपलब्ध चेकर | परीक्षक यह सुनिश्चित करने के लिए कि मॉड्यूल डिवाइस को ऑफ़लाइन स्थिति में नहीं छोड़ता है। |
डिवाइसबेसलाइन चेकर | प्रत्येक मॉड्यूल से पहले डिवाइस बेसलाइन सेटिंग्स सेट करें। |
डिवाइसबेसलाइनसेटर | डिवाइस बेसलाइन सेटिंग बनाने के लिए उपयोग की जाने वाली एब्सट्रैक्ट क्लास। |
डिवाइसबैटरी लेवल चेकर | एक IRemoteTest जो न्यूनतम बैटरी चार्ज की जाँच करता है, और यदि न्यूनतम चार्ज मौजूद नहीं है तो बैटरी के दूसरे चार्जिंग थ्रेशोल्ड तक पहुँचने की प्रतीक्षा करता है। |
डिवाइस बैटरी रिसोर्स मैट्रिक कलेक्टर | यह कलेक्टर डिवाइस बैटरी मेट्रिक्स एकत्र करता है। |
डिवाइसबिल्ड डिस्क्रिप्टर | IBuildInfo के लिए एक रैपर क्लास, जिसमें डिवाइस प्लेटफॉर्म बिल्ड जानकारी को पुनः प्राप्त करने के लिए सहायक तरीके शामिल हैं। |
डिवाइसबिल्डइन्फो | एक IBuildInfo जो संपूर्ण Android डिवाइस बिल्ड और (वैकल्पिक रूप से) इसके परीक्षणों का प्रतिनिधित्व करता है। |
डिवाइसबिल्डइंफोबूटस्ट्रैपर | एक ITargetPreparer जो डिवाइस से पढ़ी गई विशेषताओं के साथ बिल्ड जानकारी फ़ील्ड को प्रतिस्थापित करता हैयह बाहरी स्रोत से निर्मित बिल्ड वाले उपकरणों के परीक्षण के लिए उपयोगी है (उदाहरण के लिए |
डिवाइसबिल्डइंफोइंजेक्टर | एक ITargetPreparer जो IBuildInfo में DeviceBuildDescriptor मेटाडेटा सम्मिलित करता है। |
डिवाइस क्लीनर | परीक्षण के बाद क्लीनअप क्रिया के रूप में रीबूट या प्रारूपित करता है, और वैकल्पिक रूप से स्क्रीन को बंद कर देता है |
DeviceCleaner.CleanupAction | |
DeviceCleaner.PostCleanupAction | |
DeviceConcurrentUtil | समवर्ती डिवाइस साइड कमांड निष्पादन के लिए उपयोगिता विधियों और कक्षाओं को समाहित करता है |
DeviceConcurrentUtil.ShellCommandCallable <V> | एक ERROR(/Callable) जो ITestDevice पर शेल कमांड निष्पादित करने के विवरण को लपेटता है। |
डिवाइस कॉन्फ़िगरेशन होल्डर | एक ठोस IDeviceConfiguration कार्यान्वयन जो लोड किए गए डिवाइस कॉन्फ़िगरेशन ऑब्जेक्ट को उसकी विशेषताओं में संग्रहीत करता है। |
डिवाइस डिस्क्रिप्टर | परीक्षण के तहत डिवाइस का वर्णन करने वाली जानकारी वाली कक्षा। |
डिवाइस डिस्कनेक्टेड अपवाद | फेंका गया जब कोई डिवाइस अब इसके परिवहन प्रकार के माध्यम से पहुंच योग्य नहीं है, उदाहरण के लिए यदि डिवाइस अब यूएसबी, या टीसीपी/आईपी कनेक्शन के माध्यम से दिखाई नहीं दे रहा है |
डिवाइस एरर आइडेंटिफायर | डिवाइस त्रुटियों और डिवाइस रिपोर्ट की गई त्रुटियों से त्रुटि पहचानकर्ता। |
डिवाइसफेल टू बूट एरर | अगर कोई डिवाइस बिल्ड के साथ फ्लैश होने के बाद बूट करने में विफल रहता है तो उसे फेंक दिया जाता है। |
डिवाइस फ़ीचर मॉड्यूल कंट्रोलर | एक मॉड्यूल नियंत्रक परीक्षण नहीं चलाने के लिए जब यह कुछ विशेषताओं का समर्थन नहीं करता है। |
डिवाइसफाइलरिपोर्टर | एक यूटिलिटी क्लास जो फाइलों के लिए डिवाइस की जांच करती है और उन्हें ITestInvocationListener#testLog(String, LogDataType, InputStreamSource) है। |
DeviceFlashPreparer | एक ITargetPreparer जो भौतिक Android हार्डवेयर पर एक छवि को फ्लैश करता है। |
डिवाइसफोल्डेबलस्टेट | डिवाइस फोल्ड करने योग्य स्थिति का प्रतिनिधित्व "सीएमडी डिवाइस_स्टेट प्रिंट-स्टेट्स" द्वारा लौटाया गया है। |
डिवाइसफोल्डरबिल्डइन्फो | एक IDeviceBuildInfo जिसमें स्थानीय फाइल सिस्टम पर निर्देशिका में निहित अन्य बिल्ड आर्टिफैक्ट भी शामिल हैं। |
DeviceImageZipFlashingTargetPreparer | एक लक्ष्य तैयार करने वाला जो एक विशिष्ट प्रारूप के माध्यम से प्रदान की गई डिवाइस छवियों के साथ डिवाइस को फ्लैश करता है। |
डिवाइस इंटरनेट एक्सेसिबिलिटी रिसोर्स मैट्रिक कलेक्टर | डिवाइस में इंटरनेट एक्सेसिबिलिटी है या नहीं, यह जांचने के लिए कलेक्टर google.com पर पिंग करता है। |
डिवाइसJUnit4ClassRunner | JUnit4 टेस्ट रनर जो IDeviceTest को भी समायोजित करता है। |
डिवाइसJUnit4ClassRunner.LogAnnotation | पत्रकारों के लिए लॉग ले जाने के लिए नकली एनोटेशन का मतलब है। |
डिवाइसJUnit4ClassRunner.MetricAnnotation | फर्जी एनोटेशन का मतलब पत्रकारों तक मेट्रिक्स ले जाना था। |
डिवाइसJUnit4ClassRunner.TestLogData | ExternalResource संसाधन और TestRule का कार्यान्वयन। |
डिवाइसJUnit4ClassRunner.TestMetrics | ExternalResource संसाधन और TestRule का कार्यान्वयन। |
डिवाइसJUnit4ClassRunnerBuilder | एक RunnerBuilder जो DeviceJUnit4ClassRunner s की आपूर्ति करता है, विशेष रूप से ERROR(LongevitySuite/android.host.test.longevity.LongevitySuite LongevitySuite) और LongevityHostRunner के लिए रनर की आपूर्ति के लिए उपयोग किया जाता है। |
डिवाइस प्रबंधन GrpcServer | जीआरपीसी सर्वर ट्रेडफेड से एक उपकरण आरक्षित करने की अनुमति देता है। |
डिवाइस मैनेजर | |
डिवाइस मैनेजर। फास्टबूट डिवाइस | फास्टबूट मोड में डिवाइस का प्रतिनिधित्व। |
डिवाइसमैट्रिकडेटा | मीट्रिक संग्राहकों द्वारा एकत्र किए गए सभी डेटा को रखने का उद्देश्य। |
डिवाइस मॉनिटर मल्टीप्लेक्सर | एकाधिक IDeviceMonitor s के अनुरोधों को प्रसारित करने के लिए एक प्रॉक्सी वर्ग। |
डिवाइस उपलब्ध नहीं अपवाद | जब परीक्षण के लिए कोई उपकरण उपलब्ध नहीं होता है तो फेंक दिया जाता है। |
DeviceOwnerTargetPreparer | एक ITargetPreparer जो डिवाइस स्वामी घटक सेट करता है। |
डिवाइस पैरामीटरेटेड रनर | होस्ट-साइड संचालित पैरामिट्रीकृत परीक्षणों के लिए JUnit4 शैली पैरामिट्रीकृत रनर। |
डिवाइसप्रॉपर्टीज | डिवाइस साइड प्रॉपर्टी नामों के लिए सामान्य निरंतर परिभाषाएं |
डिवाइस रिकवरी मोड यूटिल | |
डिवाइस रिलीज रिपोर्टर | डिवाइस रिलीज रिपोर्टर जो डिवाइस को रिलीज करने के लिए मूल प्रक्रिया के साथ संचार को संभालता है। |
डिवाइस रीसेट सुविधा | डिवाइस रीसेट का सर्वर साइड कार्यान्वयन। |
डिवाइसरीसेटहैंडलर | उपयोगिता हैंडलिंग सामान्य रूप से डिवाइस रीसेट करना। |
डिवाइस रनटाइम अपवाद | डिवाइस कार्रवाई के अपेक्षित परिणाम नहीं मिलने पर फेंका गया। |
डिवाइस चयन विकल्प | उपकरण चयन मानदंड के लिए कंटेनर। |
DeviceSelectionOptions.DeviceRequestedType | समर्थित विभिन्न संभावित प्रकार के प्लेसहोल्डर डिवाइस। |
डिवाइससेटिंग चेकर | जांचें कि मॉड्यूल चलाने के दौरान डिवाइस सेटिंग्स बदल गई हैं या नहीं। |
डिवाइस सेटअप | एक ITargetPreparer जो प्रदान किए गए Option एस के आधार पर परीक्षण के लिए डिवाइस को कॉन्फ़िगर करता है। |
डिवाइसस्टेट मॉनिटर | एक IDevice की स्थिति की निगरानी के लिए सहायक वर्ग। |
DeviceStorageAgeResourceMetricCollector | Logcat से संग्रहण आयु पार्स करें। |
डिवाइस स्टोरेज फिलर | भंडारण को भरने के लिए लक्ष्य तैयार करने वाला इसलिए कुछ मात्रा में खाली स्थान उपलब्ध है। |
डिवाइस स्टोरेज स्टेटस चेकर | जांचें कि डिवाइस में दिए गए विभाजनों के लिए पर्याप्त डिस्क स्थान है या नहीं। |
डिवाइसस्ट्रिंग पुशर | फ़ाइल में स्ट्रिंग लिखने के लिए लक्ष्य तैयारकर्ता। |
डिवाइससुइट | परीक्षण के लिए ITestDevice प्रदान करने के लिए JUnit4 कंटेनर Suite का विस्तार करता है जिसके लिए इसकी आवश्यकता होती है। |
डिवाइस टेस्टकेस | हेल्पर JUnit टेस्ट केस जो IRemoteTest और IDeviceTest सेवाएं प्रदान करता है। |
DeviceTestResult | TestResult की विशेषज्ञता जो DeviceNotAvailableException होने पर निरस्त हो जाएगी |
DeviceTestResult.RuntimeDeviceNotAvailableException | |
डिवाइस टेस्ट रन विकल्प | BaseHostJUnit4Test के माध्यम से चल रहे डिवाइस परीक्षण से संबंधित विकल्पों के लिए एक निर्माता वर्ग। |
डिवाइस टेस्टसुइट | हेल्पर JUnit टेस्ट सूट जो IRemoteTest और IDeviceTest सेवाएं प्रदान करता है। |
डिवाइसट्रेसकलेक्टर | संग्राहक जो टेस्ट रन शुरू होने पर परफेटो ट्रेस शुरू करेगा और अंत में ट्रेस फ़ाइल लॉग करेगा। |
डिवाइस अनुपलब्ध मॉनिटर | यह श्रोता केवल परीक्षण मामले के स्तर के DNAE को पकड़ने का प्रयास करता है। |
डिवाइस अनुत्तरदायी अपवाद | DeviceNotAvailableException का एक विशेषज्ञता जो इंगित करता है कि डिवाइस एडीबी के लिए दृश्यमान है, लेकिन अनुत्तरदायी है (यानी, समय समाप्त हो रहा है, बूट नहीं होगा, आदि) |
DeviceUpdateTargetPreparer | एक अमूर्त ITargetPreparer जो बाहरी स्रोत से डिवाइस छवि फ़ाइल के साथ उपकरणों को अपडेट करने के सामान्य कदमों का ख्याल रखता है (निर्माण सेवा के विपरीत)। |
डिवाइस वाईफाई रिसोर्स मैट्रिक कलेक्टर | संग्राहक वर्तमान कनेक्टेड वाईफाई सिग्नल की शक्ति और लिंक स्पीड मेट्रिक्स एकत्र करता है। |
डिवाइसवाइपर | एक ITargetPreparer जो उपयोगकर्ता डेटा मिटा देता है |
डायरेक्टेडग्राफ <वी> | एक निर्देशित भारित रेखांकन कार्यान्वयन। |
अक्षम करेंSELinuxTargetPreparer | लक्ष्य तैयारकर्ता जो सक्षम होने पर SELinux को अक्षम करता है। |
ड्राईरनकीस्टोर | ड्राई-रन के लिए एक कीस्टोर जहां किसी भी कीस्टोर वैल्यू को हमेशा ठीक से बदला और पाया जाता है। |
ड्राईरनर | वास्तव में उन्हें निष्पादित करने के बजाय पारदर्शी रूप से ड्राई रन परीक्षण। |
डायनेमिकफाइलस्टबटेस्ट | ट्रेडफेड का परीक्षण करने के लिए यह एक ट्रेडफेड परीक्षण है जो डायनेमिक फ़ाइल को सही ढंग से हल कर सकता है। |
डायनामिक रिमोटफाइल रिज़ॉल्वर | कक्षा जो दूरस्थ फ़ाइलों के पथ को हल करने में मदद करती है। |
DynamicRemoteFileResolver.FileResolverLoader | IRemoteFileResolver के कार्यान्वयन को लोड करता है। |
डायनामिक सिस्टम प्रिपेयरर | एक ITargetPreparer जो डायनेमिक सिस्टम अपडेट के साथ डिवाइस बिल्ड के ऊपर एक सिस्टम इमेज सेट करता है। |
इ
अर्लीडिवाइस रिलीज फीचर | डिवाइस के शीघ्र रिलीज के लिए फीचर सर्वर कार्यान्वयन। |
ईमेल | एक ईमेल भेजने के लिए एक सहायक वर्ग। |
ईमेलहोस्टहेल्थएजेंट | होस्ट मॉनिटर रिपोर्ट से ईमेल भेजने के लिए IHostHealthAgent कार्यान्वयन |
EmmaXmlConstants | एम्मा एक्सएमएल रिपोर्ट को पार्स करते समय उपयोग किए जाने वाले स्थिरांक। |
एमुलेटरमेमोरीसीपीयूकैप्चरर | |
एंडसेंट्रलडायरेक्टरीइन्फो | EndCentralDirectoryInfo एक वर्ग है जिसमें ज़िप फ़ाइल की समग्र जानकारी होती है। |
EnforcedSeLinuxChecker | स्थिति परीक्षक जो सेलिनक्स की स्थिति सुनिश्चित करता है। |
मिटा उपयोगकर्ता डेटा तैयार करने वाला | एक ITargetPreparer जो डिवाइस पर उपयोगकर्ता डेटा मिटा देता है। |
त्रुटि पहचानकर्ता | यह इंटरफ़ेस एक विशिष्ट त्रुटि और उसके गुणों का वर्णन करता है। |
ErrorStorageUtil | सामान्य भंडारण के साथ संरेखित करने के लिए त्रुटियों में हेरफेर करने के लिए सहायक वर्ग। |
इवेंट्सलॉगर लिस्टनर | श्रोता जो एक फ़ाइल में प्राप्त होने वाली सभी घटनाओं को लॉग करता है |
ExceptionThrowingRunnerWrapper | |
निष्पादन योग्यबेस टेस्ट | परीक्षण की निष्पादन योग्य शैली के लिए आधार वर्ग। |
निष्पादन योग्यहोस्टटेस्ट | होस्ट पर चल रहे निष्पादन योग्य के लिए टेस्ट रनर। |
निष्पादन योग्य लक्ष्य परीक्षण | लक्ष्य पर चल रहे निष्पादन योग्य के लिए टेस्ट रनर। |
निष्पादन फ़ाइलें | परीक्षण या मंगलाचरण के निष्पादन के दौरान उत्पन्न फ़ाइलें निर्भरताएँ जिन्हें परीक्षण के लिए ले जाने की आवश्यकता होती है। |
ExecutionFiles.FilesKey | मानचित्र के लिए ज्ञात मानक कुंजी की गणना। |
निष्पादन गुण | परीक्षण या मंगलाचरण के निष्पादन के दौरान उत्पन्न गुण। |
मौजूदाबिल्डप्रोवाइडर | एक IBuildProvider जो पहले से निर्मित IBuildInfo है। |
विस्तारित फ़ाइल | बिल्ड संबंधी मेटाडेटा ले जाने के लिए मानक फ़ाइल का एक एक्सटेंशन। |
एफ
विफलता का विवरण | ट्रेड फेडरेशन में विफलता की जानकारी का वर्णन करने वाला वर्ग। |
नकली परीक्षण | एक नकली परीक्षा जिसका उद्देश्य बार-बार होने वाले परीक्षा परिणाम उत्पन्न करना आसान बनाना है। |
FakeTestsZipFolder | एक परीक्षण स्थिरता जो सामग्री की सूची के आधार पर एक नकली अनज़िप परीक्षण फ़ोल्डर बनाती है। |
FakeTestsZipFolder.ItemType | |
फास्टबूट कमांड प्रिपेयरर | लक्ष्य तैयारकर्ता जो फास्टबूट को ट्रिगर करता है और फास्टबूट कमांड भेजता है। |
फास्टबूटडिवाइसफ्लैशर | एक वर्ग जो भौतिक एंड्रॉइड हार्डवेयर पर छवि को फ्लैश करने के लिए फास्टबूट पर निर्भर करता है। |
फास्टबूट हेल्पर | फास्टबूट संचालन के लिए एक सहायक वर्ग। |
फास्टबूटअपडेटबूटस्ट्रैपप्रिपेयर | एक ITargetPreparer जो निर्दिष्ट फ़ाइलों (बूटलोडर, रेडियो, डिवाइस छवि ज़िप) को IDeviceBuildInfo में FastbootDeviceFlasher के साथ फ्लैश करने के लिए चरणबद्ध करता है, फिर परिणाम रिपोर्टिंग उद्देश्यों के लिए बिल्ड जानकारी में पोस्ट-बूट डिवाइस विशेषताओं को इंजेक्ट करता है। |
घातकहोस्ट त्रुटि | एक अपवाद जो इंगित करता है कि ट्रेडफेडरेशन चलाने वाली होस्ट मशीन पर एक घातक अपरिवर्तनीय त्रुटि हुई है, और ट्रेडफेडरेशन इंस्टेंस को बंद किया जाना चाहिए। |
फ़ीचर फ़्लैग टारगेट प्रिपेयरर | DeviceConfig को अपडेट करता है (रिमोट सर्विस द्वारा ट्यून किए गए फीचर फ्लैग)। |
फाइलडाउनलोड कैश | एक सहायक वर्ग जो डाउनलोड की गई फ़ाइलों के स्थानीय फाइल सिस्टम एलआरयू कैश को बनाए रखता है। |
फाइलडाउनलोड कैश फैक्ट्री | FileDownloadCache बनाने का कारखाना |
फ़ाइल डाउनलोड कैशे रैपर | एक रैपर वर्ग जो IFileDownloader इंटरफ़ेस को लागू करते समय FileDownloadCache सुविधाएं प्रदान करता है। |
FileIdleMonitor | फाइलों पर नज़र रखता है और यदि वे निष्क्रिय हैं तो कॉलबैक निष्पादित करता है (यानी |
फ़ाइल इनपुटस्ट्रीम स्रोत | एक InputStreamSource जो एक इनपुट फ़ाइल लेता है। |
फाइललॉगर | एक ILeveledLogOutput जो लॉग संदेशों को फ़ाइल और स्टडआउट पर निर्देशित करता है। |
FileProtoResultReporter | प्रोटो रिपोर्टर जो TestRecord को फ़ाइल में डंप करता है। |
FilePullerDeviceMetricCollector | एक BaseDeviceMetricCollector जो डिवाइस से आने वाली मेट्रिक्स कुंजी को सुनता है और उन्हें डिवाइस से फ़ाइल के रूप में खींचता है। |
FilePullerLogCollector | डिवाइस-साइड द्वारा रिपोर्ट की गई फ़ाइल का लकड़हारा। |
फ़ाइल सिस्टम लॉग सेवर | लॉग को फ़ाइल सिस्टम में सहेजें। |
FileUtil | फ़ाइल संबंधित संचालन के लिए एक सहायक वर्ग |
FileUtil.HarnessIOException | हार्नेस अपवाद जो फ़ाइल मुद्दों को ले जाने में मदद करता है। |
FileUtil.LowDiskSpaceException | प्रयोग करने योग्य डिस्क स्थान न्यूनतम सीमा से नीचे होने पर फेंक दिया जाता है। |
फ़िल्टर किए गए परिणाम फ़ॉरवर्डर | ResultForwarder का वैरिएंट जो केवल TestDescription की अनुमति वाली सूची को रिपोर्ट करने की अनुमति देता है। |
फिक्स्डबाइटएरेऑटपुटस्ट्रीम | एक इन-मेमोरी ERROR(/OutputStream) जो केवल अधिकतम मात्रा में डेटा रखती है। |
चमकती विधि | परीक्षण के तहत डिवाइस को फ्लैश करने के लिए उपयोग की जाने वाली विधि का वर्णन करने के लिए एक गणना |
चमकती संसाधन पार्सर | एक वर्ग जो डिवाइस को फ्लैश करने के लिए आवश्यक सहायक छवि फ़ाइलों के आवश्यक संस्करणों को पार्स करता है। |
FlashingResourcesParser.AndroidInfo | Map<String, MultiMap<String, String>> . |
FlashingResourcesParser.Constraint | एक फ़िल्टरिंग इंटरफ़ेस, जिसका उद्देश्य FlashingResourcesParser को कुछ संसाधनों को अनदेखा करने की अनुमति देना है जो अन्यथा उपयोग कर सकते हैं |
FlashingResourceUtil | यह उपयोगिता कलाकृतियों के उपयुक्त संस्करण को सेट करने में मदद करती है ताकि उन्हें DeviceFlashPreparer के माध्यम से फ्लैश किया जा सके। |
FoldableExpandingHandler | एक IModuleParameterHandler प्रत्येक गैर-प्राथमिक फ़ोल्ड करने योग्य कॉन्फ़िगरेशन के लिए अधिक विस्तार करता है। |
फ़ोल्ड करने योग्य हैंडलर | सामान्य फोल्डेबल हैंडलर जो एक विशेष मॉड्यूल बनाने के लिए फोल्डेबल मापदंडों को ले सकता है। |
FoldableModePreparer | एक लक्ष्य तैयार करने वाला जो डिवाइस की फोल्ड करने योग्य स्थिति को स्विच कर सकता है। |
फ़ोल्डरबिल्डइन्फो | IFolderBuildInfo का ठोस कार्यान्वयन। |
फ़ोल्डरसेवर | एक ITargetPreparer जो निर्देशिकाओं को डिवाइस से बाहर निकालता है, उसे संपीड़ित करता है और लॉगिंग बैकएंड में सहेजता है। |
स्वरूपित जेनरेटर रिपोर्टर | रिपोर्टर जो एक विशेष प्रारूप में रिपोर्ट तैयार करने की अनुमति देता है। |
फ्रीडिवाइसस्टेट | |
फ़्यूज़यूटिल | FUSE संचालन के लिए एक सहायक वर्ग। |
जी
GceAvdInfo | किसी दिए गए GCE AVD उदाहरण के लिए प्रासंगिक डेटा रखने की संरचना। |
GceAvdInfo.GceStatus | |
GceAvdInfo.LogFileEntry | |
Gceप्रबंधक | हेल्पर जो जीसीई कॉल को शुरू/बंद करने और जीसीई से लॉग एकत्र करने के लिए प्रबंधन करता है। |
GceRemoteCmdFormatter | रिमोट जीसीई डिवाइस तक पहुंचने के लिए कमांड को फॉर्मेट करने के लिए यूटिलिटी क्लास। |
GceRemoteCmdFormatter.ScpMode | तर्कों की संरचना के आधार पर फ़ाइल को धक्का देने या खींचने के लिए एससीपी का उपयोग किया जा सकता है। |
GceSshTunnelMonitor | Gce ssh टनल के लिए थ्रेड मॉनिटर। |
GcovCodeCoverageCollector | एक BaseDeviceMetricCollector जो डिवाइस से gcov कवरेज माप को हटा देगा और उन्हें परीक्षण कलाकृतियों के रूप में लॉग करेगा। |
GcovKernelCodeCoverageCollector | एक BaseDeviceMetricCollector जो gcov कर्नेल कवरेज मापन को डिबगफ़्स से और डिवाइस से बाहर खींचेगा और फिर अंत में उन्हें परीक्षण कलाकृतियों के रूप में लॉग करेगा। |
GCSbucketUtil | Google क्लाउड स्टोरेज (जीसीएस) से फाइल डाउनलोड और अपलोड करने के लिए फाइल मैनेजर। |
GCSBucketUtil.GCSFileMetadata | जीसीएस में फ़ाइल जानकारी के लिए सरल आवरण। |
जीसीएस कॉमन | डाउनलोड और अपलोड जैसे जीसीएस ऑपरेशन के लिए बेस क्लास। |
GCSConfigurationFactory | एक ConfigurationFactory फैक्ट्री Google क्लाउड स्टोरेज से कॉन्फ़िगरेशन लोड करती है। |
GCSConfigurationFactory.GCSConfigLoader | ConfigurationFactory.ConfigLoader लोड करता है, शामिल कॉन्फ़िगरेशन को एक रूट कॉन्फ़िगरेशन से ट्रैक करता है, और सर्कुलर पर एक अपवाद फेंकता है। |
GCSConfigurationServer | कॉन्फिग सर्वर गूगल क्लाउड स्टोरेज (जीसीएस) से कॉन्फिग लोड करता है। |
जीसीएस डाउनलोडर हेल्पर | जीसीएस बकेट के लिए डाउनलोडर जो कैशिंग और वैश्विक कॉन्फ़िगरेशन को हल करने का ख्याल रखता है। |
जीसीएसफ़ाइलडाउनलोडर | गूगल क्लाउड स्टोरेज (जीसीएस) से फाइल डाउनलोड करने के लिए फाइल डाउनलोडर। |
जीसीएसफ़ाइलअपलोडर | Google क्लाउड स्टोरेज (GCS) पर फ़ाइल डेटा अपलोड करने के लिए फ़ाइल अपलोडर। |
जीसीहोस्ट रिसोर्स मैनेजर | GCS (Google क्लाउड स्टोरेज) से होस्ट संसाधन डाउनलोड करें। |
GcsRemoteFileResolver | IRemoteFileResolver का कार्यान्वयन जो GCS बकेट से डाउनलोड करने की अनुमति देता है। |
GenericLogcatEventParser <LogcatEventType> | ईवेंट के लिए लॉगकैट इनपुट पार्स करें। |
GenericLogcatEventParser.LogcatEvent | इवेंट प्रकार और ट्रिगरिंग लॉगकैट संदेश के साथ लॉगकैट इवेंट रखने के लिए संरचना |
GetPreviousPassedHelper | पिछले उत्तीर्ण परीक्षण फ़िल्टर प्राप्त करने में सहायक। |
GkiDeviceFlashPreparer | एक लक्ष्य तैयार करने वाला जो एंड्रॉइड कॉमन कर्नेल जेनेरिक इमेज के साथ डिवाइस को फ्लैश करता है। |
वैश्विक विन्यास | एक IGlobalConfiguration कार्यान्वयन जो लोड किए गए कॉन्फ़िगरेशन ऑब्जेक्ट को मानचित्र में संग्रहीत करता है |
ग्लोबल फ़िल्टर गेट्टर | सेवा कार्यान्वयन जो किसी दिए गए मंगलाचरण के फ़िल्टर लौटाता है। |
ग्लोबल टेस्ट फिल्टर | आमंत्रण पर लागू फ़िल्टर विकल्प। |
GoogleApiClientUtil | Google API क्लाइंट बनाने के लिए उपयोगिताएँ। |
GoogleBenchmarkResultParser | शेल से चलने वाले Google बेंचमार्क के परिणामों को पार्स करता है, और सभी परिणामों के साथ एक मानचित्र लौटाता है। |
गूगल बेंचमार्क टेस्ट | एक टेस्ट जो दिए गए डिवाइस पर Google बेंचमार्क टेस्ट पैकेज चलाता है। |
GranularRetriableTestWrapper | एक आवरण वर्ग IRemoteTest पर टेस्टकेस स्तर में IRemoteTest को दानेदार बनाने के लिए काम करता है। |
GranularRetriableTestWrapper.StartEndCollector | लापता रन स्टार्ट और एंड को पकड़ने के लिए क्लास हेल्पर। |
GsiDeviceFlashPreparer | एक लक्ष्य तैयार करने वाला जो एंड्रॉइड जेनेरिक सिस्टम छवि के साथ डिवाइस को फ्लैश करता है। |
जी टेस्ट | एक टेस्ट जो दिए गए डिवाइस पर नेटिव टेस्ट पैकेज चलाता है। |
जीटेस्टबेस | gTest की आधार श्रेणी |
GTestListTestParser | "--gtest_list_tests" पैरामीटर के साथ gtest ड्राई रन मोड के लिए परिणाम पार्सर। |
GTestResultParser | शेल से चलने वाले GTest का उपयोग करके देशी परीक्षणों के 'कच्चे आउटपुट मोड' परिणामों को पार्स करता है, और परिणामों के ITestInvocationListener को सूचित करता है। |
GTestXmlResultParser | Parses the 'xml output mode' results of native tests using GTest that run from shell, and informs a ITestRunListener of the results. |
H
HarnessException | Base exception class for exception thrown within the harness. |
HarnessRuntimeException | |
HeapHostMonitor | AbstractHostMonitor implementation that monitors the heap memory on the host and log it periodically to the history log. |
HelloWorldMultiTargetPreparer | An example implementation of a IMultiTargetPreparer . |
HistoryLogger | TF History Logger, special log that contains only some specific events. |
HostGTest | A Test that runs a native test package. |
HostMetric | This class represents a host metric sample to be reported. |
HostOptions | Host options holder class. |
HostStatsdMetricCollector | एक IMetricCollector जो statsd उपयोगिता आदेशों का उपयोग करके होस्ट की ओर से statsd मेट्रिक्स एकत्र करता है। |
HostTest | A test runner for JUnit host based tests. |
HostUtils | Implements some useful utility methods for running host tests. |
HprofAllocSiteParser | Helper class to parse info from an Allocation Sites section of hprof reports. |
HttpHelper | Contains helper methods for making http requests |
HttpHelper.RequestRunnable | Runnable for making requests with IRunUtil#runEscalatingTimedRetry(long, long, long, long, IRunnableResult) . |
HttpMultipartPost | Helper class for making multipart HTTP post requests. |
HttpRemoteFileResolver | Implementation of IRemoteFileResolver that allows downloading remote file via http |
HttpsRemoteFileResolver | Implementation of IRemoteFileResolver that allows downloading remote file via https |
I
IAbi | Interface representing the ABI under test. |
IAbiReceiver | A test that needs the ABI under test. |
IAndroidDebugBridge | Interface definition for AndroidDebugBridge methods used in this package. |
IAppBuildInfo | This interface is deprecated. Use IBuildInfo directly. |
IAutoRetriableTest | Interface for an IRemoteTest that doesn't implement ITestFilterReceiver but still wishes to support auto-retry. |
IBatteryInfo | The interface defining the interaction with a battery of a device. |
IBatteryInfo.BatteryState | Describes the current battery charging state. |
IBuildInfo | Holds information about the build under test. |
IBuildInfo.BuildInfoProperties | Some properties that a IBuildInfo can have to tweak some handling of it. |
IBuildProvider | Responsible for providing info regarding the build under test. |
IBuildReceiver | A test that needs reference to the build under test. |
IClusterClient | An interface for interacting with the TFC backend. |
IClusterEvent | Interface for any cluster event to be uploaded to TFC. |
IClusterEventUploader <T extends IClusterEvent > | Interface for ClusterEventUploader |
IClusterOptions | An interface for getting cluster-related options. |
ICommandOptions | Container for execution options for commands. |
ICommandScheduler | A scheduler for running TradeFederation commands. |
ICommandScheduler.IS शेड्यूल्ड इनवोकेशन लिस्टनर | मंगलाचरण पूरा होने पर मंगलाचरण घटनाओं के लिए श्रोता। |
ICompressionStrategy | An interface representing a compression algorithm that can be selected at runtime. |
IConfigOptionValueTransformer | An interface for manipulating config option value |
IConfigurableVirtualDevice | An interface to provide information about a possibly preconfigured virtual device info (host ip, host user, ports offset and etc.). |
IConfiguration | Configuration information for a TradeFederation invocation. |
IConfigurationFactory | Factory for creating IConfiguration s |
IConfigurationReceiver | Simple interface to represent object that accepts an IConfiguration . |
IConfigurationServer | An interface for config server. |
ICredentialFactory | An interface for credential factory to create oauth2 Credential . |
IDefaultObjectLoader | Interface for loading the default objects that should be part of our YAML configuration. |
IDefaultObjectLoader.LoaderConfiguration | The loading configuration object to pass information to the loader. |
IDeviceBuildInfo | A IBuildInfo that represents a complete Android device build and (optionally) its tests. |
IDeviceBuildProvider | A IBuildProvider that uses information from a ITestDevice to retrieve a build. |
IDeviceConfiguration | Device Configuration Holder Interface. |
IDeviceFlasher | Flashes a device image on a device. |
IDeviceFlasher.UserDataFlashOption | Enum of options for handling the userdata image |
IDeviceManager | Interface for managing the set of available devices for testing. |
IDeviceManager.IFastbootListener | A listener for fastboot state changes. |
IDeviceMonitor | Interface for monitoring state of devices. |
IDeviceMonitor.DeviceLister | A Runnable -like class that should return the known devices and their states. |
IDeviceRecovery | Interface for recovering a device that has gone offline. |
IDeviceSelection | Interface for device selection criteria. |
IDeviceStateMonitor | Provides facilities for monitoring the state of a IDevice . |
IDeviceTest | Interface for object that needs a reference to a ITestDevice . |
IDisableable | Interface that describes a Tradefed object that can be disabled. |
IEmail | Interface for sending email. |
IEmail.Message | Container for email message data. |
IFileDownloader | Interface for downloading a remote file. |
IFileEntry | Interface definition that provides simpler, mockable contract to FileEntry methods. |
IFileResolverLoader | Loads implementations of IRemoteFileResolver . |
IFileResolverLoader.ResolverLoadingException | Exception thrown if a resolver cannot be loaded or initialized. |
IFlashingResourcesParser | Interface for providing required versions of auxiliary image files needed to flash a device. |
IFlashingResourcesRetriever | Interface for retrieving auxiliary image files needed to flash a device. |
IFolderBuildInfo | A simple abstract IBuildInfo whose build artifacts are containing in a local filesystem directory. |
IFormatterGenerator | Interface describing a formatter for SuiteResultHolder . |
IGlobalConfiguration | A class to encompass global configuration information for a single Trade Federation instance (encompassing any number of invocations of actual configurations). |
IHarnessException | Description of the harness exception interface that will be implemented by harness exceptions. |
IHostCleaner | Cleans up the host after the test run has finished. |
IHostHealthAgent | An interface to emit host or device metrics. |
IHostMonitor | Interface to dispatch host data |
IHostMonitor.HostDataPoint | Generic class for data to be reported. |
IHostMonitor.HostMetricType | |
IHostOptions | Host options holder interface. |
IHostOptions.PermitLimitType | Enum describing the possible permit limiters |
IHostResourceManager | Interface to manager host resource. |
IHttpHelper | Helper methods for performing http requests. |
IHttpHelper.DataSizeException | |
IInvocationContext | Holds information about the Invocation for the tests to access if needed. |
IInvocationContext.TimingEvent | |
IInvocationContextReceiver | A test that needs reference to the context of the invocation. |
IInvocationExecution | Interface describing the actions that will be done as part of an invocation. |
IKeyStoreClient | Interface to access a key store for password or sensitive data. |
IKeyStoreFactory | Factory for creating IKeyStoreClient . |
ILabPreparer | Marker interface for lab preparers See |
ILeveledLogOutput | Classes which implement this interface provides methods that deal with outputting log messages. |
ILogcatReceiver | A class that provides the output of a device's logcat as an InputStreamSource . |
ILogRegistry | An interface for a ILogOutput singleton logger that multiplexes and manages different loggers. |
ILogRegistry.EventType | Events that are useful to be logged |
ILogSaver | Classes which implement this interface provide methods for storing logs to a central location. |
ILogSaverListener | जब लॉग फ़ाइलें सहेजी जाती हैं तो ITestInvocationListener को सुनने की अनुमति देता है। |
IManagedTestDevice | A ITestDevice whose lifecycle is managed. |
IManagedTestDevice.DeviceEventResponse | Container for a response to a IManagedTestDevice#handleAllocationEvent(DeviceEvent) call |
IManagedTestDeviceFactory | Creator interface for IManagedTestDevice s |
IMetricकलेक्टर | मैचिंग मेट्रिक्स एकत्र करने के लिए परीक्षण के परिणाम रिपोर्ट करते समय यह इंटरफ़ेस एक डेकोरेटर के रूप में जोड़ा जाएगा। |
IMetricCollectorReceiver | Interface for IRemoteTest s to implement if they need to get the list of IMetricCollector s for the test run. |
IMoblyYamlResultHandler | Interface of mobly yaml result handler. |
IMoblyYamlResultHandler.ITestResult | Interface of mobly yaml result |
IModuleController | Interface for controlling if a module should be executed or not. |
IModuleController.RunStrategy | Enum describing how the module should be executed. |
IModuleParameterHandler | The interface for parameters of suites modules. |
IMultiDeviceRecovery | Interface for recovering multiple offline devices. |
IMultiDeviceTest | This interface is deprecated. This interface is kept temporarily for compatibility but is not actually used anymore. Please do not implement it. |
IMultiTargetPreparer | Prepares the test environment for several devices together. |
INativeDevice | Provides an reliable and slightly higher level API to a ddmlib IDevice . |
INativeDeviceTest | Interface for object that needs a reference to a INativeDevice . |
InfraErrorIdentifier | Error Identifiers from Trade Federation infra, and dependent infra (like Build infra). |
InputStreamSource | This interface basically wraps an ERROR(/InputStream) to make it clonable. |
InstallAllTestZipAppsSetup | A ITargetPreparer that installs all apps in a test zip. |
InstallApexModuleTargetPreparer | |
InstallApkSetup | A ITargetPreparer that installs one or more apks located on the filesystem. |
InstallBuildEnvApkSetup | A ITargetPreparer that installs one or more test apks from an Android platform build env. |
InstalledInstrumentationsTest | Runs all instrumentation found on current device. |
InstantAppHandler | Handler for ModuleParameters#INSTANT_APP . |
InstrumentationPreparer | A ITargetPreparer that runs instrumentation |
InstrumentationTest | A Test that runs an instrumentation test package on given device. |
InvocationContext | Generic implementation of a IInvocationContext . |
InvocationExecution | Class that describes all the invocation steps: build download, target_prep, run tests, clean up. |
InvocationLocal <T> | This class provides invocation-scope variables. |
InvocationMetricLogger | A utility class for an invocation to log some metrics. |
InvocationMetricLogger.InvocationGroupMetricKey | Grouping allows to log several groups under a same key. |
InvocationMetricLogger.InvocationMetricKey | Some special named key that we will always populate for the invocation. |
InvocationStatus | A class to store invocation status. |
InvocationStatus | A helper enum to represent the invocation status |
InvocationSummaryHelper | Helper class for gathering and reporting TestSummary for set of listeners |
मंगलाचरणToJUnitResultForwarder | एक वर्ग जो ITestInvocationListener की घटनाओं को सुनता है और उन्हें एक TestListener को अग्रेषित करता है। |
आईपोस्टप्रोसेसर | पोस्ट प्रोसेसर एक ट्रेड फ़ेडरेशन ऑब्जेक्ट है जिसका मतलब परीक्षण के बाद और परिणाम रिपोर्टिंग से पहले मेट्रिक्स और लॉग के प्रसंस्करण की अनुमति देना है। |
IRemoteFeature | Interface describing a feature in Tradefed that can be executed based on the request. |
IRemoteFileResolver | Interface for objects that can resolve a remote file into a local one. |
IRemoteFileResolver.RemoteFileResolverArgs | The args passed to the resolvers |
IRemoteFileResolver.ResolvedFile | Class holding information about the resolved file and some metadata. |
IRemoteScheduledListenersFeature | Extension of IRemoteFeature to support passing in IScheduledInvocationListener s. |
IRemoteTest | A test that reports results directly to a ITestInvocationListener . |
IReportNotExecuted | In case of an incomplete execution, IRemoteTest that implements this interface may report their non-executed tests for improved reporting. |
IRescheduler | Interface for rescheduling a config for future execution. |
IResourceMetricCollector | The interface for user to implement customized resource collectors. |
IRestApiHelper | A helper interface for performing REST API calls. |
IResumableTest | This interface is deprecated. No need for this anymore |
IRetryDecision | Interface driving the retry decision and applying the filter on the class for more targeted retry. |
IRuntimeHintProvider | |
IRunUtil | Interface for running timed operations and system commands. |
IRunUtil.EnvPriority | Enum that defines whether setting or unsetting a particular env. |
IRunUtil.IRunnableResult | An interface for asynchronously executing an operation that returns a boolean status. |
ISandbox | Interface defining a sandbox that can be used to run an invocation. |
ISandboxFactory | Factory for creating ISandbox . |
ISetOptionReceiver | Implementation of this interface should have an Option with a "set-option" name linked to HostTest#SET_OPTION_NAME . |
IShardableListener | एक ITestInvocationListener जिसे शार्ड किया जा सकता है। |
IShardableTest | A IRemoteTest that can be split into separately executable sub-tests. |
IShardHelper | Interface of an object that describes the sharding strategy to adopt for a configuration. |
IsolatedHostTest | Implements a TradeFed runner that uses a subprocess to execute the tests in a low-dependency environment instead of executing them on the main process. |
ISupportGranularResults | इंटरफ़ेस निर्दिष्ट करता है कि ITestInvocationListener परिणाम प्राप्त करने का समर्थन करता है या नहीं। |
ISystemStatusChecker | An checker that performs checks on system status and returns a boolean to indicate if the system is in an expected state. |
ISystemStatusCheckerReceiver | A IRemoteTest that requires access to the ISystemStatusChecker from the configuration. |
ITargetCleaner | This interface is deprecated. tearDown has been moved to the base ITargetPreparer interface. |
ITargetPreparer | Prepares the test environment for the test run. |
ITerribleFailureHandler | An interface to handle terrible failures from LogUtil.CLog.wtf(String, Throwable) |
ITestAnnotationFilterReceiver | A runner that can filter which tests to run based on annotations. |
ITestCollector | Provides support for test collection; when set, test runner must perform a dry run to collect test cases without actually executing them. |
ITestDevice | Provides an reliable and slightly higher level API to a ddmlib IDevice . |
ITestDevice.ApexInfo | A simple struct class to store information about a single APEX |
ITestDevice.MountPointInfo | A simple struct class to store information about a single mountpoint |
ITestDevice.RecoveryMode | |
ITestFileFilterReceiver | A runner that can receive a file specifying which tests to run and/or not to run. |
ITestFilterReceiver | A runner that can filter which tests to run. |
ITestInformationReceiver | Interface to receive the TestInformation for some classes. |
ITestInvocation | Handles one TradeFederation test invocation. |
ITestInvocation.ExitInformation | Represents some exit information for an invocation. |
ITestInvocationListener | परीक्षण मंगलाचरण से परीक्षा परिणाम के लिए श्रोता। |
ITestLifeCycleReceiver | Receives event notifications during instrumentation test runs. |
ITestLogger | एक इकाई जो विभिन्न प्रकार की डेटा धाराओं का लॉगिंग कर सकती है। |
ITestLoggerReceiver | An entity that can be injected with an ITestLogger instance so that it can be used for logging purposes. |
ITestsPool | Interface describing a pool of tests that we can access and run |
ITestSuite | Abstract class used to run Test Suite. |
ITestSuite.MultiDeviceModuleStrategy | |
ITestSuiteResultLoader | Interface describing an helper to load previous results in a way that can be re-run. |
ITestSummaryListener | इंटरफ़ेस जो ITestInvocationListener को सारांश के माध्यम से कुछ सीमित जानकारी का आदान-प्रदान करने की अनुमति देता है। |
ITestsZipInstaller | Installs tests from a tests zip file (as outputted by the build system) on a device. |
ITokenProvider | Interface describing an object that can provide the tokens of a particular device. |
ITokenRequest | Interface a IRemoteTest can implement to expose the fact that it requires a device with a special token. |
J
JarHostTest | Test runner for host-side JUnit tests. |
JarHostTest.HostTestListener | रैपर श्रोता जो एम्बेडेड श्रोता को testRunStarted() और testRunEnded() को छोड़कर सभी घटनाओं को अग्रेषित करता है। |
JavaCodeCoverageCollector | एक BaseDeviceMetricCollector जो जावा कवरेज मापन को डिवाइस से हटा देगा और उन्हें परीक्षण कलाकृतियों के रूप में लॉग करेगा। |
JavaCodeCoverageFlusher | A utility class that resets and forces a flush of Java code coverage measurements from processes running on the device. |
JSONFileKeyStoreClient | A sample implementation where a local JSON file acts a key store. |
JSONFileKeyStoreFactory | Implementation of a JSON KeyStore Factory, which provides a JSONFileKeyStoreClient for accessing a JSON Key Store File. |
JsonHttpTestResultReporter | एक परिणाम रिपोर्टर जो परीक्षण मेट्रिक्स परिणाम और शाखा, डिवाइस जानकारी को JSON में और POST को एक HTTP सेवा समापन बिंदु में एन्कोड करता है |
JUnit4ResultForwarder | Result forwarder from JUnit4 Runner. |
JUnit4TestFilter | Helper Class that provides the filtering for JUnit4 runner by extending the Filter . |
JUnitRunUtil | A helper class for directing a IRemoteTest#run(TestInformation, ITestInvocationListener) call to a Test#run(TestResult) call. |
JUnitToInvocationResultForwarder | A class that listens to TestListener events and forwards them to an ITestInvocationListener . |
JUnitXmlParser | Parser that extracts test result data from JUnit results stored in ant's XMLJUnitResultFormatter and forwards it to a ITestInvocationListener. |
K
KeyguardControllerState | A container for the keyguard states. |
KeyguardStatusChecker | Checks the keyguard status after module execution. |
KeyStoreException | Thrown when a fatal key store error happens. |
KillExistingEmulatorPreparer | A ITargetPreparer that shuts down a running emulator. |
KnownFailurePreparer | Target preparer to skip retrying known failure. |
L
LabResourceDeviceMonitor | The lab resource monitor which initializes/manages the gRPC server for LabResourceService. |
LargeOutputReceiver | A class designed to help run long running commands collect output. |
लास्टशार्ड डिटेक्टर | स्थानीय शार्डिंग चलाते समय, कभी-कभी हम केवल कुछ क्रियाओं को निष्पादित करना चाहते हैं जब अंतिम शार्ड invocationEnded(long) तक पहुँच जाता है। |
LaunchCvdHelper | Utility helper to control Launch_cvd in the Cuttlefish VM. |
LeakedThreadStatusChecker | Status checker to ensure a module does not leak a running Thread. |
लीगेसीसबप्रोसेसरिजल्ट्सरिपोर्टर | उपप्रक्रिया परिणाम रिपोर्टर का एक स्थिर कार्यान्वयन जो TF/CTS के पुराने संस्करणों (जैसे 8+) के साथ संगत रहना चाहिए, इसके सुपरक्लास में परिवर्तन के बावजूद। |
ListInstrumentationParser | A IShellOutputReceiver that parses the output of a 'pm list instrumentation' query |
ListInstrumentationParser.InstrumentationTarget | |
LocalAndroidVirtualDevice | The class for local virtual devices running on TradeFed host. |
LocalAppBuildProvider | A IBuildProvider that constructs a IBuildInfo based on a provided local path |
LocalDeveloper | Detects and returns whether this is a local developer running Tradefed. |
LocalDeviceBuildProvider | A IBuildProvider that constructs a IDeviceBuildInfo based on a provided filesystem directory path. |
LocalEmulatorLaunch | A TargetPreparer that launches an emulator locally from an android build environment. |
LocalEmulatorSnapshot | A TargetPreparer intended for generating a clean emulator snapshot from a android build/development environment |
LocalFileHeader | LocalFileHeader is a class containing the information of a file/folder inside a zip file. |
LocalFileResolver | Implementation of IRemoteFileResolver that allows linking local files |
LocalFolderBuildProvider | A IBuildProvider that constructs a IFolderBuildInfo based on a provided local path |
LocalHostResourceManager | Manager host resource. |
LocalPool | Implementation of a pool of local tests |
LocalRunInstructionBuilder | Utility to compile the instruction to run test locally. |
LockSettingsBaselineSetter | A setter to remove screen lock settings. |
LogcatCrashResultForwarder | विशेष श्रोता: विफलताओं (इंस्ट्रूमेंटेशन प्रोसेस क्रैशिंग) पर यह लॉगकैट क्रैश से निकालने का प्रयास करेगा और इसे परीक्षण से जुड़े विफलता संदेश में जोड़ देगा। |
LogcatEventParser | |
LogcatEventType | Event types for LogcatEventParser . |
LogcatOnFailureCollector | संग्राहक जो एक परीक्षण मामले के विफल होने पर एक लॉगकैट को कैप्चर और लॉग करेगा। |
LogcatReceiver | Class that collects logcat in background. |
LogcatTimingMetricCollector | एक मीट्रिक संग्राहक जो लॉगकैट लाइनों से किसी घटना के प्रारंभ और अंत संकेतों को पार्स करने के लिए दिए गए रेगेक्स पैटर्न का उपयोग करके एक या एक से अधिक दोहराए गए परीक्षणों के दौरान लॉगकैट से समय की जानकारी (जैसे उपयोगकर्ता स्विच समय) एकत्र करता है। |
LogDataType | Represents the data type of log data. |
LogFile | Class to hold the metadata for a saved log file. |
LogFileSaver | A helper for ITestInvocationListener 's that will save log data to a file |
LogReceiver | |
LogRegistry | A ILogRegistry implementation that multiplexes and manages different loggers, using the appropriate one based on the ThreadGroup of the thread making the call. |
लॉगसेवर रिजल्ट फारवर्डर | वैश्विक फ़ाइल सेवर के साथ लॉग सहेजने के लिए एक ResultForwarder । |
LogUtil | A logging utility class. |
LogUtil.CLog | A shim class for Log that automatically uses the simple classname of the caller as the log tag |
LongevityHostRunner | A JUnit4-based Runner that composes tests run with DeviceJUnit4ClassRunner into a ERROR(LongevitySuite/android.host.test.longevity.LongevitySuite LongevitySuite) , which runs tests repeatedly to induce stress and randomness. |
M
MainlineModuleHandler | A simple handler class for Mainline Modules that creates a InstallApexModuleTargetPreparer and injects the dynamic link into it based on the given mainline modules to automatically retrieve those modules. |
MainlineTestModuleController | Base class for a module controller to run tests based on the preloaded mainline modules on the device under test. |
ManagedRemoteDevice | A device running inside a virtual machine that we manage remotely via a Tradefed instance inside the VM. |
ManagedTestDeviceFactory | Factory to create the different kind of devices that can be monitored by Tf |
MergedZipEntryCollection | Merge individual zip entries in a large zip file into blocks to minimize the download attempts. |
MergeMultiBuildTargetPreparer | A IMultiTargetPreparer that allows to pass information from one build to another by naming them and the file key to copy to the other build. |
MergeStrategy | Describes how the results should be aggregated when multiple attempts are present. |
मेट्रिकफाइलपोस्टप्रोसेसर | परीक्षण और रन स्तर के दौरान एकत्रित मेट्रिक्स लॉग फ़ाइल को अपलोड करने के लिए उपयोग किया जाता है। |
MetricOption | Annotation for test methods annotated with @Test , or if the annotation is part of the annotation list of TestDescription that allows to specify some extra parameters useful for: Tuning the behavior of the collectors, filtering some methods. |
मेट्रिक्सXMLResultReporter | MetricsXMLResultReporter टेस्ट मेट्रिक्स लिखता है और मेट्रिक्स-फ़ोल्डर पैरामीटर द्वारा निर्दिष्ट फ़ोल्डर में मेट्रिक्स को एक XML फ़ाइल में टेस्ट के इनवोकेशन एंडेड चरण में चलाता है। |
MetricTestCase | Extension of TestCase that allows to log metrics when running as part of TradeFed. |
MetricTestCase.LogHolder | Structure to hold a log file to be reported. |
MetricUtil | Utility class for pulling metrics from pushed statsd configurations. |
MetricUtility | Contains common utility methods for storing the test metrics, aggregating the metrics in similar tests and writing the metrics to a file. |
MinApiLevelModuleController | Base class for a module controller to not run tests when it below a specified API Level. |
MinSdkModuleController | Base class for a module controller to not run tests on versions below a specified SDK version number. |
MixImageZipPreparer | An IMultiTargetPreparer that mixes a system build's images in a device build. |
MoblyBinaryHostTest | Host test meant to run a mobly python binary file from the Android Build system (Soong) |
MoblyYamlResultControllerInfoHandler | Mobly yaml result 'Controller Info' element handler. |
MoblyYamlResultControllerInfoHandler.ControllerInfo | |
MoblyYamlResultControllerInfoHandler.ControllerInfo.Builder | |
MoblyYamlResultHandlerFactory | Mobly yaml result handler factory which generates appropriate handler based on result type. |
MoblyYamlResultHandlerFactory.InvalidResultTypeException | |
MoblyYamlResultHandlerFactory.Type | |
MoblyYamlResultParser | Mobly yaml test results parser. |
MoblyYamlResultRecordHandler | Mobly yaml result 'Record' element handler. |
MoblyYamlResultRecordHandler.Record | |
MoblyYamlResultRecordHandler.Record.Builder | |
MoblyYamlResultRecordHandler.RecordResult | |
MoblyYamlResultSummaryHandler | Mobly yaml result 'Summary' element handler. |
MoblyYamlResultSummaryHandler.Summary | |
MoblyYamlResultSummaryHandler.Summary.Builder | |
MoblyYamlResultTestNameListHandler | Mobly yaml result 'Test Name List' element handler. |
MoblyYamlResultTestNameListHandler.TestNameList | |
MoblyYamlResultTestNameListHandler.TestNameList.Builder | |
MoblyYamlResultUserDataHandler | Mobly yaml result 'User Data' element handler. |
MoblyYamlResultUserDataHandler.UserData | |
MoblyYamlResultUserDataHandler.UserData.Builder | |
ModuleDefinition | Container for the test run configuration. |
मॉड्यूल लिस्टनर | परिणामों की सूची एकत्र करने के लिए श्रोता प्रत्येक मॉड्यूल के प्रत्येक IRemoteTest से जुड़ा हुआ है। |
मॉड्यूललॉगकैटकलेक्टर | लॉगकैट कलेक्टर का संस्करण लेकिन मॉड्यूल के लिए। |
ModuleMerger | Helper class for operation related to merging ITestSuite and ModuleDefinition after a split. |
ModuleOemTargetPreparer | |
ModuleParameters | Special values associated with the suite "parameter" keys in the metadata of each module. |
ModuleParametersHelper | Helper to get the IModuleParameterHandler associated with the parameter. |
ModulePusher | |
ModulePusher.ModulePushError | Fatal error during Mainline module push. |
ModuleSplitter | Helper to split a list of modules represented by IConfiguration into a list of execution units represented by ModuleDefinition . |
MultiFailureDescription | Collect multiple FailureDescription in one holder. |
MultiMap <K, V> | A ERROR(/Map) that supports multiple values per key. |
N
नाम मंगल श्रोता | परिणामों की रिपोर्ट के रूप में परीक्षण विधि, वर्ग और पैकेज नामों का अनुवाद करने के लिए एक प्रॉक्सी श्रोता। |
NativeBenchmarkTest | A Test that runs a native benchmark test executable on given device. |
NativeBenchmarkTestParser | A IShellOutputReceiver that parses the benchmark test data output, collecting metrics on average time per operation. |
NativeBridgeModuleController | A module controller to check if a device support native bridge. |
NativeCodeCoverageFlusher | A utility class that clears native coverage measurements and forces a flush of native coverage data from processes on the device. |
NativeDevice | Default implementation of a ITestDevice Non-full stack android devices. |
NativeDevice.AdbAction | A DeviceAction for running a OS 'adb ....' command. |
NativeDevice.AdbShellAction | |
NativeDevice.RebootDeviceAction | DeviceAction for rebooting a device. |
NativeDevice.RebootMode | A mode of a reboot. |
NativeDeviceStateMonitor | Helper class for monitoring the state of a IDevice with no framework support. |
NativeLeakCollector | A ITargetPreparer that runs 'dumpsys meminfo --unreachable -a' to identify the unreachable native memory currently held by each process. |
NativeStressTest | A Test that runs a native stress test executable on given device. |
NativeStressTestParser | A IShellOutputReceiver that parses the stress test data output, collecting metrics on number of iterations complete and average time per iteration. |
NegativeHandler | Handler that specify that nothing should be done and the parameter should not create any extra module. |
NestedDeviceStateMonitor | Device state monitor that executes extra checks on nested device to accommodate the specifics of the virtualized environment. |
NestedRemoteDevice | Representation of the device running inside a remote Cuttlefish VM. |
NetworkNotAvailableException | Thrown when a device is not able to connect to network for testing. |
NoApkTestSkipper | Special preparer that allows to skip an invocation completely (preparation and tests) if there are no apks to tests. |
NoDeviceException | Thrown when there's no device to execute a given command. |
NoisyDryRunTest | Run noisy dry run on a command file. |
NoOpConfigOptionValueTransformer | An no-op IConfigOptionValueTransformer |
NotMultiAbiHandler | Special handler that notify the SuiteModuleLoader that the secondary abi should not create a module. |
NullDevice | A placeholder IDevice used by DeviceManager to allocate when IDeviceSelection#nullDeviceRequested() is true |
O
OpenObjectLoader | Loader for the default objects available in AOSP. |
Option | Annotates a field as representing a IConfiguration option. |
Option.Importance | |
OptionClass | Annotates a class as representing a IConfiguration object. |
OptionCopier | A helper class that can copy Option field values with same names from one object to another. |
OptionDef | Holds the details of an Option . |
OptionFetcher | Helper to get the test options from the parent process. |
OptionNotAllowedException | Specific ConfigurationException when an option is not allowed to be passed in the command line. |
OptionSetter | Populates Option fields. |
OptionSetter.OptionFieldsForName | Container for the list of option fields with given name. |
OptionUpdateRule | Controls the behavior when an option is specified multiple times. |
OtaDeviceBuildInfo | A IDeviceBuildInfo used for over-the-air update testing. |
OtatoolsBuildInfo | An IBuildInfo that contains otatools artifacts. |
OtaZipfileBuildProvider | Provides a IBuildInfo based on a local OTA zip file. |
OxygenClient | A class that manages the use of Oxygen client binary to lease or release Oxygen device. |
OxygenUtil | Utility to interact with Oxygen service. |
P
PackageInfo | Container for an application's package info parsed from device. |
PackageInstalledModuleController | Module controller to not run tests when the device has not got the given packages installed. |
Pair <A, B> | Define our own Pair class which contains two objects. |
PairingMultiTargetPreparer | A multi-target preparer helps make Bluetooth pairing (and connection) between two devices. |
ParallelDeviceExecutor <V> | Wrapper of ERROR(/ExecutorService) to execute a function in parallel. |
ParentSandboxInvocationExecution | Version of InvocationExecution for the parent invocation special actions when running a sandbox. |
ParentShardReplicate | Replicate a setup for one device to all other devices that will be part of sharding. |
पासिंग टेस्टफाइल रिपोर्टर | एक ITestInvocationListener जो परीक्षण मामलों की सूची को एक परीक्षण फ़ाइल में सहेजता है |
परफेटोजेनेरिकपोस्टप्रोसेसर | एक पोस्ट प्रोसेसर जो टेक्स्ट/बाइनरी मेट्रिक परफेटो प्रोटो फाइल को की-वैल्यू पेयर में प्रोसेस करता है, जब तक कि न्यूमेरिक वैल्यू वाले फील्ड का सामना नहीं किया जाता है, तब तक स्ट्रिंग वैल्यू के साथ प्रोटो मैसेज और फील्ड का विस्तार किया जाता है। |
PerfettoGenericPostProcessor.AlternativeParseFormat | |
PerfettoGenericPostProcessor.METRIC_FILE_FORMAT | |
PerfettoPreparer | Perfetto preparer pushes the config file in to the device at a standard location to which perfetto have access to. |
परफेटो पुलर मैट्रिक कलेक्टर | FilePullerDeviceMetricCollector का मूल कार्यान्वयन जो डिवाइस से FilePullerDeviceMetricCollector फ़ाइलों को खींचने और उससे मेट्रिक्स एकत्र करने की अनुमति देता है। |
PerfettoPullerMetricCollector.METRIC_FILE_FORMAT | |
PerfettoTraceRecorder | A utility class for recording perfetto trace on a ITestDevice . |
PrettyPrintDelimiter | Helper utility that helps to print delimited message that stands out. |
प्रिटीटेस्टइवेंटलॉगर | लॉगर घटनाओं से मेल खाते हैं और डीबग करना आसान बनाने के लिए उन्हें लॉगिंग करते हैं। |
ProcessInfo | Used to store process related(USER, PID, NAME, START TIME IN SECOND SINCE EPOCH) information. |
PropertyChanger | A utility class for changing (or adding) items in an Android property file |
ProtoResultParser | Parser for the Tradefed results proto format. |
ProtoResultParser.TestLevel | Enumeration representing the current level of the proto being processed. |
ProtoResultReporter | परिणाम रिपोर्टर अंदर सभी परिणामों के साथ एक TestRecord है। |
ProtoUtil | Utility methods for dealing with protobuf messages type-agnostically. |
ProxyConfiguration | Object that allows pointing to a remote configuration to execute. |
PsParser | Utility used to parse(USER,PID and NAME) from the "ps" command output |
PtsBotTest | Run PTS-bot tests. |
PushFileInvoker | This class is deprecated. Use PushFilePreparer instead |
PushFilePreparer | A ITargetPreparer that attempts to push any number of files from any host path to any device path. |
PythonBinaryHostTest | Host test meant to run a python binary file from the Android Build system (Soong) The test runner supports include-filter and exclude-filter. |
PythonBinaryHostTest.PythonForwarder | रन नाम को बाइनरी नाम से बदलने के लिए परिणाम फारवर्डर। |
PythonUnitTestResultParser | Interprets the output of tests run with Python's unittest framework and translates it into calls on a series of ITestInvocationListener s. |
PythonUnitTestRunner | This class is deprecated. Use PythonBinaryHostTest instead. |
PythonVirtualenvHelper | A helper class for activating Python 3 virtual environment. |
PythonVirtualenvPreparer | Sets up a Python virtualenv on the host and installs packages. |
Q
QuotationAwareTokenizer |
R
रीबूट रीज़न कलेक्टर | कलेक्टर जो टेस्ट रन के दौरान डिवाइस रीबूट एकत्र करता है और उन्हें कारण और गणना के आधार पर रिपोर्ट करता है। |
RebootTargetPreparer | Target preparer that reboots the device. |
RecoveryLogPreparer | A target preparer used to collect logs before recovery. |
RegexTrie <V> | The RegexTrie is a trie where eachERROR(/Pattern) . |
RemoteAndroidDevice | Implementation of a ITestDevice for a full stack android device connected via adb connect. |
RemoteAndroidVirtualDevice | Extends RemoteAndroidDevice behavior for a full stack android device running in the Google Compute Engine (Gce). |
RemoteAvdIDevice | A placeholder IDevice used by DeviceManager to allocate when DeviceSelectionOptions.gceDeviceRequested() is true |
RemoteFileResolver | A simple class that allows one to load files from a variety of places using URIs and the service provider functionality. |
RemoteFileUtil | Utility class to handle file from a remote instance |
RemoteInvocationExecution | Implementation of InvocationExecution that drives a remote execution. |
RemoteInvocationExecution.FileOptionValueTransformer | |
RemoteSshUtil | Utility to execute ssh commands on remote instances. |
RemoteTestTimeOutEnforcer | श्रोता जो किसी दिए गए टेस्ट कॉन्फ़िगरेशन के निष्पादन समय की जांच करने की अनुमति देता है और यदि यह किसी दिए गए टाइमआउट पर जाता है तो इसे विफल कर देता है। |
RemoteZip | Utilities to unzip individual files inside a remote zip file. |
RemoveSystemAppPreparer | A ITargetPreparer for removing an apk from the system partition before a test run. |
रिपोर्ट पास टेस्ट | पास किए गए परीक्षण को बाहर करने के लिए फ़ाइल संभावित फ़िल्टर में रिपोर्ट करें। |
ResolvePartialDownload | Resolve a partial download request. |
ResourceMetricUtil | Utility functions for composing metrics. |
ResourceUtil | Utility for reading configuration resources. |
RestApiHelper | A helper class for performing REST API calls. |
RestartSystemServerTargetPreparer | Target preparer that restarts the system server without rebooting the device. |
परिणामसंकलक | विशेष फारवर्डर जो आवश्यक होने पर परिणामों को एकत्रित करता है, जो पुनः प्रयास रणनीति के आधार पर किया गया था। |
परिणाम और लॉग फारवर्डर | परिणाम और लॉग घटनाओं के लिए फारवर्डर। |
परिणाम फारवर्डर | एक ITestInvocationListener जो मंगलाचरण परिणामों को अन्य श्रोताओं की सूची में अग्रेषित करता है। |
ResultsPlayer | Special runner that replays the results given to it. |
RetentionFileSaver | Helper class for creating a .retention file in a directory. |
RetryConfigurationFactory | Factory that handles retrying a command. |
RetryLogSaverResultForwarder | फारवर्डर जो हमारे वर्तमान प्रयास को पास करने का काम भी संभालता है। |
RetryPreparationDecision | A Class to describe the decisions about whether or not to retry preparation and to fail the module run. |
RetryRescheduler | A special runner that allows to reschedule a previous run tests that failed or where not executed. |
RetryRescheduler.RetryType | The types of the tests that can be retried. |
RetryResultForwarder | ResultForwarder का एक एक्सटेंशन जो हमेशा किसी दिए गए प्रयास नंबर पर पुश करता है। |
RetryResultHelper | Helper class to determine which module or test should run or not. |
RetryStatistics | Structure holding the statistics for a retry session of one IRemoteTest . |
RetryStrategy | The Retry Strategy to be used when re-running some tests. |
RootTargetPreparer | Target preparer that performs "adb root" or "adb unroot" based on option "force-root". |
RunAftersWithInfo | |
RunBeforesWithInfo | |
RunCommandTargetPreparer | |
RunConfigDeviceRecovery | Generic base IMultiDeviceRecovery to run a tradefed configuration to do the recovery step. |
RunHostCommandTargetPreparer | Target preparer to run arbitrary host commands before and after running the test. |
RunHostScriptTargetPreparer | Target preparer which executes a script before running a test. |
RunInterruptedException | Thrown when a run operation is interrupted by an external request. |
RunNotifierWrapper | Wrapper of RunNotifier so we can carry the DeviceNotAvailableException . |
RunOnSdkSandboxHandler | Handler for ModuleParameters#RUN_ON_SDK_SANDBOX . |
RunOnSdkSandboxTargetPreparer | An ITargetPreparer to marks that tests should run in the sdk sandbox. |
RunOnSecondaryUserParameterHandler | |
RunOnSecondaryUserTargetPreparer | An ITargetPreparer that creates a secondary user in setup, and marks that tests should be run in that user. |
RunOnSystemUserTargetPreparer | An ITargetPreparer that marks that tests should be run on the user (rather than the current user). |
RunOnWorkProfileParameterHandler | |
RunOnWorkProfileTargetPreparer | An ITargetPreparer that creates a work profile in setup, and marks that tests should be run in that user. |
रनटाइम रीस्टार्ट कलेक्टर | संग्राहक जो परीक्षण चलाने के दौरान रनटाइम पुनरारंभ (सिस्टम सर्वर क्रैश) के टाइमस्टैम्प एकत्र करता है, यदि कोई हो। |
RunUtil | A collection of helper methods for executing operations. |
RustBenchmarkResultParser | Interprets the output of tests run with Criterion benchmarking framework and translates it into calls on a series of ITestInvocationListener s. |
RustBinaryHostTest | Host test meant to run a rust binary file from the Android Build system (Soong) |
RustBinaryTest | A Test that runs a rust binary on given device. |
RustTestBase | Base class of RustBinaryHostTest and RustBinaryTest |
RustTestBase.EnvPair | |
RustTestBase.Invocation | |
RustTestResultParser | Interprets the output of tests run with Rust's unittest framework and translates it into calls on a series of ITestInvocationListener s. |
S
SandboxConfigDump | Runner class that creates a IConfiguration based on a command line and dump it to a file. |
SandboxConfigDump.DumpCmd | |
SandboxConfigurationException | Special Configuration Exception coming from the Sandbox setup. |
SandboxConfigurationFactory | Special Configuration factory to handle creation of configurations for Sandboxing purpose. |
SandboxConfigUtil | A utility class for managing IConfiguration when doing sandboxing. |
SandboxedInvocationExecution | Special sandbox execution of the invocation: This is the InvocationExection for when we are inside the sandbox running the command. |
SandboxInvocationRunner | Run the tests associated with the invocation in the sandbox. |
SandboxOptions | Class that can receive and provide options to a ISandbox . |
ScreenshotOnFailureCollector | संग्राहक जो एक परीक्षण मामले के विफल होने पर एक स्क्रीनशॉट को कैप्चर और लॉग करेगा। |
Sdk28ModuleController | A module controller to check if a device is on SDK 28 (Android 9) or above. |
Sdk29ModuleController | Only run tests if the device under test is SDK version 29 or above. |
Sdk30ModuleController | Only run tests if the device under test is SDK version 30 or above. |
Sdk31ModuleController | Only run tests if the device under test is SDK version 31 or above. |
Sdk32ModuleController | Only run tests if the device under test is SDK version 32 or above. |
Sdk33ModuleController | Only run tests if the device under test is SDK version 33 or above. |
SecondaryUserHandler | Handler for ModuleParameters#SECONDARY_USER . |
SemaphoreTokenTargetPreparer | This is a preparer used to use token to serialize test excution in tradefed host. |
SerializationUtil | Utility to serialize/deserialize an object that implements ERROR(/Serializable) . |
ServiceAccountKeyCredentialFactory | A credential factory to create service account key based oauth Credential . |
SettingsBaselineSetter | A common setter to handle device baseline settings via ITestDevice.setSetting. |
ShardBuildCloner | Helper class that handles cloning a build info from the command line. |
ShardHelper | Helper class that handles creating the shards and scheduling them for an invocation. |
ShardListener | एक ITestInvocationListener जो एक इनवोकेशन शार्ड से परिणाम एकत्र करता है (उर्फ एक इनवोकेशन स्प्लिट जो समानांतर में कई संसाधनों पर चलने के लिए होता है), और उन्हें दूसरे श्रोता को अग्रेषित करता है। |
ShardMainResultForwarder | एक ResultForwarder जो शार्प्ड टेस्ट इनवोकेशन के परिणामों को जोड़ता है। |
ShellOutputReceiverStream | Utility subclass of OutputStream that writes into an IShellOutputReceiver. |
ShellStatusChecker | Check if the shell status is as expected before and after a module run. |
ShippingApiLevelModuleController | Run tests if the device meets the following conditions:
|
शोमैपपुलरमैट्रिककलेक्टर | FilePullerDeviceMetricCollector का मूल कार्यान्वयन जो डिवाइस से शोमैप फ़ाइलों को खींचने और उससे मेट्रिक्स एकत्र करने की अनुमति देता है। |
SideloadOtaTargetPreparer | A target preparer that performs sideload of a specified OTA package, applies the package, waits for device to boot up, and injects the device build properties to use as build info This target preparer assumes that the device will be in regular adb mode when started, and will ensure that the device exits in the same mode but with the newer build applied. |
SimpleFileLogger | A ILeveledLogOutput that directs log messages to stdout and to a single log file. |
SimplePerfResult | Object to hold all simpleperf test results |
SimplePerfStatResultParser | A utility class to parse simpleperf result. |
SimplePerfUtil | Utility class to dispatch simple command and collect results |
SimplePerfUtil.SimplePerfType | Enum of simpleperf command options |
SimpleStats | A small utility class that calculates a few statistical measures given a numerical dataset. |
SizeLimitedOutputStream | A thread safe file backed ERROR(/OutputStream) that limits the maximum amount of data that can be written. |
SkipHWASanModuleController | Base class for a module controller to not run tests on HWASan builds. |
Sl4aBluetoothUtil | A utility class provides Bluetooth operations on one or two devices using SL4A |
Sl4aBluetoothUtil.BluetoothAccessLevel | Enums for Bluetooth device access level which are based on BluetoothDevice.java |
Sl4aBluetoothUtil.BluetoothConnectionState | Enums for Bluetooth connection states which are based on BluetoothProfile.java |
Sl4aBluetoothUtil.BluetoothPriorityLevel | Enums for Bluetooth profile priority level which are based on BluetoothProfile.java |
Sl4aBluetoothUtil.BluetoothProfile | Enums for Bluetooth profiles which are based on BluetoothProfile.java |
Sl4aClient | Sl4A client to interact via RPC with SL4A scripting layer. |
Sl4aEventDispatcher | Event dispatcher polls for event and queue them by name to be queried. |
Sl4aEventDispatcher.EventSl4aObject | Object returned by the event poller. |
SnapshotInputStreamSource | A File-backed InputStreamSource. |
SparseImageUtil | Utility to unsparse sparse images. |
SparseImageUtil.SparseInputStream | SparseInputStream read from upstream and detects the data format. |
स्टैट्सड बिफोर आफ्टरगेजमैट्रिकपोस्टप्रोसेसर | एक पोस्ट प्रोसेसर जो "पहले/बाद" दृष्टिकोण में एकत्रित गेज मेट्रिक्स को संसाधित करता है, यानी |
StatsdEventMetricPostProcessor | एक पोस्ट प्रोसेसर जो प्रोसेसर पर निर्दिष्ट फॉर्मेटर्स का उपयोग करते हुए स्टेट्स रिपोर्ट में इवेंट मेट्रिक्स को की-वैल्यू पेयर में प्रोसेस करता है। |
StatsdGenericPostProcessor | एक पोस्ट प्रोसेसर जो ट्री संरचना के रूप में रिपोर्ट का विस्तार करके बाइनरी प्रोटो स्टेट्स रिपोर्ट को की-वैल्यू पेयर में प्रोसेस करता है। |
StatusCheckerResult | Contains the result of a ISystemStatusChecker execution. |
StatusCheckerResult.CheckStatus | |
StdoutLogger | A ILeveledLogOutput that directs log messages to stdout. |
StopServicesSetup | A ITargetPreparer that stops services on the device. |
StreamProtoReceiver | A receiver that translates proto TestRecord received into Tradefed events. |
StreamProtoResultReporter | ProtoResultReporter का कार्यान्वयन |
StreamUtil | Utility class for managing input streams. |
StrictShardHelper | Sharding strategy to create strict shards that do not report together, |
StringEscapeUtils | Utility class for escaping strings for specific formats. |
StringUtil | Utility class for escaping strings for common string manipulation. |
StubBuildProvider | No-op empty implementation of a IBuildProvider . |
StubDevice | Stub placeholder implementation of a IDevice . |
StubKeyStoreClient | Default stub implementation for KeyStore Client. |
StubKeyStoreFactory | Default stub implementation for KeyStore Factory |
StubLocalAndroidVirtualDevice | A placeholder IDevice used by DeviceManager to allocate when DeviceSelectionOptions.localVirtualDeviceRequested() is true |
StubMultiTargetPreparer | Placeholder empty implementation of a IMultiTargetPreparer . |
StubTargetPreparer | Placeholder empty implementation of a ITargetPreparer . |
StubTest | No-op empty test implementation. |
StubTestRunListener | Stub implementation of ITestRunListener |
SubprocessCommandException | A subprocess command failed to run. |
SubprocessConfigBuilder | Build a wrapper TF config XML for an existing TF config. |
SubprocessEventHelper | Helper to serialize/deserialize the events to be passed to the log. |
SubprocessEventHelper.BaseTestEventInfo | Base Helper for TestIgnored information. |
SubprocessEventHelper.FailedTestEventInfo | Helper for testFailed information. |
SubprocessEventHelper.InvocationEndedEventInfo | Helper for invocation ended information. |
SubprocessEventHelper.InvocationFailedEventInfo | Helper for InvocationFailed information. |
SubprocessEventHelper.InvocationStartedEventInfo | Helper for invocation started information. |
SubprocessEventHelper.LogAssociationEventInfo | Helper for logAssociation information. |
SubprocessEventHelper.TestEndedEventInfo | Helper for testEnded information. |
SubprocessEventHelper.TestLogEventInfo | Helper for testLog information. |
SubprocessEventHelper.TestModuleStartedEventInfo | Helper for test module started information. |
SubprocessEventHelper.TestRunEndedEventInfo | Helper for testRunEnded Information. |
SubprocessEventHelper.TestRunFailedEventInfo | Helper for testRunFailed information |
SubprocessEventHelper.TestRunStartedEventInfo | Helper for testRunStarted information |
SubprocessEventHelper.TestStartedEventInfo | Helper for testStarted information |
SubprocessExceptionParser | Helper to handle the exception output from standard Tradefed command runners. |
SubprocessReportingHelper | A class to build a wrapper configuration file to use subprocess results reporter for a cluster command. |
उपप्रक्रिया परिणाम रिपोर्टर | ITestInvocationListener के रूप में निर्दिष्ट किए जाने के लिए ITestInvocationListener को लागू करता है और परीक्षण, टेस्ट रन, टेस्ट इनवोकेशन के परिणामों को उपप्रोसेस से आगे बढ़ाता है। |
SubprocessTestResultsParser | Extends ERROR(/FileOutputStream) to parse the output before writing to the file so we can generate the test events on the launcher side. |
SubprocessTestResultsParser.StatusKeys | Relevant test status keys. |
SubprocessTfLauncher | A IRemoteTest for running tests against a separate TF installation. |
SuiteApkInstaller | Installs specified APKs for Suite configuration: either from $ANDROID_TARGET_OUT_TESTCASES variable or the ROOT_DIR in build info. |
SuiteModuleLoader | Retrieves Compatibility test module definitions from the repository. |
SuiteModuleLoader.ConfigFilter | A ERROR(/FilenameFilter) to find all the config files in a directory. |
SuiteResultHolder | Helper object to ease up serializing and deserializing the invocation results. |
SuiteResultReporter | संपूर्ण सुइट आह्वान के लिए परीक्षा परिणाम एकत्र करें और अंतिम परिणाम आउटपुट करें। |
SuiteResultReporter.ModulePrepTimes | Object holder for the preparation and tear down time of one module. |
SuiteTestFilter | Represents a filter for including and excluding tests. |
SwitchUserTargetPreparer | A ITargetPreparer that switches to the specified user kind in setUp. |
SystemServerFileDescriptorChecker | Checks if system server appears to be running out of FDs. |
SystemServerStatusChecker | Check if the pid of system_server has changed from before and after a module run. |
SystemUpdaterDeviceFlasher | A IDeviceFlasher that relies on the system updater to install a system image bundled in a OTA update package. |
SystemUtil | Utility class for making system calls. |
SystemUtil.EnvVariable |
T
TableBuilder | Helper class to display a matrix of String elements in a table. |
TableFormatter | Helper class to display a matrix of String elements so each element column is lined up |
TargetSetupError | A fatal error occurred while preparing the target for testing. |
TarUtil | Utility to manipulate a tar file. |
TcpDevice | A placeholder IDevice used by DeviceManager to allocate when DeviceSelectionOptions.tcpDeviceRequested() is true |
TearDownPassThroughPreparer | Allows for running tearDown on preparers that are included in a config as an object. |
TelephonyHelper | A utility to use and get information related to the telephony. |
TelephonyHelper.SimCardInformation | An information holder for the sim card related information. |
TelephonyTokenProvider | Token provider for telephony related tokens. |
TemperatureThrottlingWaiter | An ITargetPreparer that waits until device's temperature gets down to target |
TemplateResolutionError | Class extending ConfigurationException for template related error during configuration parsing. |
TerribleFailureEmailHandler | A simple handler class that sends an email to interested people when a WTF (What a Terrible Failure) error occurs within a Trade Federation instance. |
TestAppInstallSetup | A ITargetPreparer that installs one or more apps from a IDeviceBuildInfo.getTestsDir() folder onto device. |
TestContext | A class to model a TestContext message of TFC API. |
TestDependencyResolver | Helper to resolve dependencies if needed. |
TestDescription | Class representing information about a test case. |
TestDescriptionsFile | A utility class for marshalling and unmarshalling a list of TestDescriptions to a test file. |
TestDevice | Implementation of a ITestDevice for a full stack android device |
TestDevice.MicrodroidBuilder | A builder used to create a Microdroid TestDevice. |
TestDeviceOptions | Container for ITestDevice Option s |
TestDeviceOptions.InstanceType | |
TestDeviceState | A more fully featured representation of device state than DeviceState . |
TestEnvironment | A class to model a TestEnvironment message returned by TFC API. |
TestErrorIdentifier | Error identifier from tests and tests runners. |
TestFailureListener | अनुरोध किए जाने पर परीक्षण विफलता पर श्रोता स्क्रीनशॉट, बगरेपोर्ट, लॉगकैट संग्रह जैसी कार्रवाई करते थे। |
TestFailureModuleController | Controller for module that simply want to tune how the tests failures log collected are behaving. |
TestFilePushSetup | A ITargetPreparer that pushes one or more files/dirs from a IDeviceBuildInfo.getTestsDir() folder onto device. |
TestFilterHelper | Helper class for filtering tests |
TestGroupStatus | A class to store status of a test group. |
TestInfo | Stores the test information set in a TEST_MAPPING file. |
TestInformation | Holder object that contains all the information and dependencies a test runner or test might need to execute properly. |
TestInformation.Builder | Builder to create a TestInformation instance. |
TestInvocation | Default implementation of ITestInvocation . |
TestInvocation.RunMode | The different mode an invocation can run into. |
TestInvocation.Stage | |
TestInvocationManagementServer | GRPC server helping to management test invocation and their lifecycle. |
TestInvocationManagementServer.InvocationInformation | |
TestMapping | A class for loading a TEST_MAPPING file. |
TestMappingSuiteRunner | विकल्प शामिल-फ़िल्टर, या बिल्ड से TEST_MAPPING फ़ाइलों द्वारा निर्दिष्ट परीक्षणों को चलाने के लिए BaseTestSuite का कार्यान्वयन, एक सूट के रूप में। |
TestOption | Stores the test option details set in a TEST_MAPPING file. |
TestOutputUploader | Uploads test output files to local file system, GCS, or an HTTP(S) endpoint. |
TestRecordInterpreter | Utility to convert a TestRecord proto into a more easily manipulable format in Tradefed. |
TestRecordProtoUtil | Utility to read the TestRecord proto from a file. |
TestResource | A class to model a TestResource message returned by TFC API. |
TestResourceDownloader | A class to download test resource files from file system/GCS/HTTP. |
TestResult | Container for a result of a single test. |
TestResultListener | A simplification of ITestLifecycleListener for implementers that only care about individual test results. |
TestRunResult | Holds results from a single test run. |
TestRunToTestInvocationForwarder | Forwarder from ddmlib ITestRunListener to ITestLifeCycleReceiver . |
TestsPoolPoller | Tests wrapper that allow to execute all the tests of a pool of tests. |
TestSuiteInfo | A class that resolves loading of build related metadata for test suite To properly expose related info, a test suite must include a |
TestSummary | A class to represent a test summary. |
TestSummary.Type | |
TestSummary.TypedString | |
TestSystemAppInstallSetup | A ITargetPreparer that installs one or more apps from a IDeviceBuildInfo.getTestsDir() folder onto the /system partition on device. |
TestTimeoutEnforcer | श्रोता जो किसी दिए गए परीक्षण मामले के निष्पादन समय की जांच करने की अनुमति देता है और यदि यह किसी दिए गए समय से अधिक हो जाता है तो इसे विफल कर देता है। |
टेक्स्ट रिजल्ट रिपोर्टर | एक परीक्षा परिणाम रिपोर्टर जो परिणामों को JUnit टेक्स्ट परिणाम प्रिंटर को अग्रेषित करता है। |
TfMetricProtoUtil | Utility class to help with the Map |
TfObjectTracker | A utility to track the usage of the different Trade Fedederation objects. |
TfSuiteRunner | Implementation of ITestSuite which will load tests from TF jars res/config/suite/ folder. |
TfTestLauncher | A IRemoteTest for running unit or functional tests against a separate TF installation. |
TimeStatusChecker | Status checker to ensure that the device and host time are kept in sync. |
TimeUtil | Contains time related utility methods. |
TimeVal | This is a sentinel type which wraps a Long . |
TimeWaster | A simple target preparer to waste time and potentially restart the device. |
TokenProperty | Supported token with dynamic sharding. |
TokenProviderHelper | Helper that gives the provider associated to a particular token, in order to find out if a device supports the token. |
ट्रेस सीएमडी कलेक्टर | एक IMetricCollector जो ट्रेस-सीएमडी का उपयोग करके परीक्षण के दौरान निशान एकत्र करता है, और उन्हें मंगलाचरण में लॉग करता है। |
TracingLogger | Class that helps to manage tracing for each test invocation. |
TradefedConfigObject | A class to model a TradefedConfigObject message of TFC API. |
TradefedConfigObject.Type | A list of configuration object types which can be injected to a cluster command config. |
TradefedDelegator | Objects that helps delegating the invocation to another Tradefed binary. |
TradefedFeatureClient | A grpc client to request feature execution from the server. |
TradefedFeatureServer | A server that responds to requests for triggering features. |
TradefedSandbox | Sandbox container that can run a Trade Federation invocation. |
TradefedSandboxFactory | Default implementation for SandboxFactory |
TradefedSandboxRunner | Runner associated with a TradefedSandbox that will allow executing the sandbox. |
TradefedSandboxRunner.StubScheduledInvocationListener | एक ठूंठ IScheduledInvocationListener जो कुछ नहीं करता। |
U
UiAutomatorRunner | Runs UI Automator test on device and reports results. |
UiAutomatorTest | |
UiAutomatorTest.LoggingOption | |
UiAutomatorTest.TestFailureAction | |
UnexecutedTestReporterThread | Threads that takes care of reporting all unexecuted tests. |
UniqueMultiMap <K, V> | A MultiMap that ensures unique values for each key. |
UsbResetMultiDeviceRecovery | A IMultiDeviceRecovery which resets USB buses for offline devices. |
UsbResetRunConfigRecovery | Allow to trigger a command to reset the USB of a device |
UsbResetTest | An IRemoteTest that reset the device USB and checks whether the device comes back online afterwards. |
UserChecker | Checks if users have changed during the test. |
UserCleaner | A ITargetPreparer that removes secondary users on teardown. |
UserInfo | Similar to UserInfo class from platform. |
UserInfo.UserType | Supported variants of a user's type in external APIs. |
V
ValidateSuiteConfigHelper | This class will help validating that the IConfiguration loaded for the suite are meeting the expected requirements: - No Build providers - No Result reporters |
VersionedFile | Data structure representing a file that has an associated version. |
VersionParser | Fetch the version of the running tradefed artifacts. |
VmRemoteDevice | A Remote virtual device that we will manage from inside the Virtual Machine. |
W
WaitDeviceRecovery | A simple implementation of a IDeviceRecovery that waits for device to be online and respond to simple commands. |
WaitForDeviceDatetimePreparer | A ITargetPreparer that waits for datetime to be set on device Optionally this preparer can force a |
WifiHelper | Helper class for manipulating wifi services on device. |
WifiPreparer | A ITargetPreparer that configures wifi on the device if necessary. |
X
XmlFormattedGeneratorReporter | FormattedGeneratorReporter का कार्यान्वयन जो सुइट को एक xml प्रारूप में स्वरूपित करता है। |
एक्सएमएल परिणाम रिपोर्टर | चींटी के XMLJUnitResultFormatter के अनुरूप एक प्रारूप में एक XML फ़ाइल में JUnit परिणाम लिखता है। |
XmlSuiteResultFormatter | Utility class to save a suite run as an XML. |
XmlSuiteResultFormatter.RunHistory | Helper object for JSON conversion. |
Y
YamlClassOptionsParser | Helper to parse test runner information from the YAML Tradefed Configuration. |
Z
ZipCompressionStrategy | An ICompressionStrategy for creating zip archives. |
ZipUtil | A helper class for compression-related operations |
ZipUtil2 | A helper class for zip extraction that takes POSIX file permissions into account |