גזרות תצוגה

אנדרואיד 9 מוסיפה תמיכה ביישום סוגים שונים של גזרות תצוגה במכשירים. גזרות תצוגה מאפשרות לך ליצור חוויות סוחפות, מקצה לקצה, תוך מתן מקום לחיישנים חשובים בחזית המכשירים.

גזרת תצוגה מרכזית עליונה

איור 1. חיתוך תצוגה מרכזית עליונה

אנדרואיד 9 תומך בסוגי החיתוכים הבאים:

  • מרכז עליון: גזרה במרכז הקצה העליון
  • חלק העליון לא ממורכז: הגזרה עשויה להיות בפינה או מעט מחוץ למרכז
  • תחתון: גזרה בתחתית
  • כפול: גזרה אחת מלמעלה ואחת מלמטה

דוגמאות ומקור

קוד מנהל החלונות הבא ב- PhoneWindowManager.java מראה כיצד מסגרות תצוגה מוכנסות לאזור הבטוח כאשר LAYOUT_IN_DISPLAY_CUTOUT_MODE_ALWAYS אינו מוגדר.

// Ensure that windows with a DEFAULT or NEVER display cutout mode are laid out in
// the cutout safe zone.
if (cutoutMode != LAYOUT_IN_DISPLAY_CUTOUT_MODE_ALWAYS) {
    final Rect displayCutoutSafeExceptMaybeBars = mTmpDisplayCutoutSafeExceptMaybeBarsRect;
    displayCutoutSafeExceptMaybeBars.set(displayFrames.mDisplayCutoutSafe);
    if (layoutInScreen && layoutInsetDecor && !requestedFullscreen
            && cutoutMode == LAYOUT_IN_DISPLAY_CUTOUT_MODE_DEFAULT) {
        // At the top we have the status bar, so apps that are
        // LAYOUT_IN_SCREEN | LAYOUT_INSET_DECOR but not FULLSCREEN
        // already expect that there's an inset there and we don't need to exclude
        // the window from that area.
        displayCutoutSafeExceptMaybeBars.top = Integer.MIN_VALUE;
    }
    if (layoutInScreen && layoutInsetDecor && !requestedHideNavigation
            && cutoutMode == LAYOUT_IN_DISPLAY_CUTOUT_MODE_DEFAULT) {
        // Same for the navigation bar.
        switch (mNavigationBarPosition) {
            case NAV_BAR_BOTTOM:
                displayCutoutSafeExceptMaybeBars.bottom = Integer.MAX_VALUE;
                break;
            case NAV_BAR_RIGHT:
                displayCutoutSafeExceptMaybeBars.right = Integer.MAX_VALUE;
                break;
            case NAV_BAR_LEFT:
                displayCutoutSafeExceptMaybeBars.left = Integer.MIN_VALUE;
                break;
        }
    }
    if (type == TYPE_INPUT_METHOD && mNavigationBarPosition == NAV_BAR_BOTTOM) {
        // The IME can always extend under the bottom cutout if the navbar is there.
        displayCutoutSafeExceptMaybeBars.bottom = Integer.MAX_VALUE;
    }
    // Windows that are attached to a parent and laid out in said parent already avoid
    // the cutout according to that parent and don't need to be further constrained.
    // Floating IN_SCREEN windows get what they ask for and lay out in the full screen.
    // They will later be cropped or shifted using the displayFrame in WindowState,
    // which prevents overlap with the DisplayCutout.
    if (!attachedInParent && !floatingInScreenWindow) {
        mTmpRect.set(pf);
        pf.intersectUnchecked(displayCutoutSafeExceptMaybeBars);
        parentFrameWasClippedByDisplayCutout |= !mTmpRect.equals(pf);
    }
    // Make sure that NO_LIMITS windows clipped to the display don't extend under the
    // cutout.
    df.intersectUnchecked(displayCutoutSafeExceptMaybeBars);
}

SystemUI מעבד באזור החיתוך, וצריך לקבוע היכן הוא יכול לצייר. PhoneStatusBarView.java מספק דוגמה לתצוגה הקובעת היכן גזרת התצוגה, כמה היא גדולה והאם ההכנסה מסרגל הניווט מונעת מאזור החתך או לא.

על ידי דריסת onApplyWindowInsets() , תצוגה יכולה לקבוע היכן נמצא הגזרה ולעדכן את הפריסה שלה בהתאם.

@Override
    public WindowInsets onApplyWindowInsets(WindowInsets insets) {
        if (updateOrientationAndCutout(mLastOrientation)) {
            updateLayoutForCutout();
            requestLayout();
        }
        return super.onApplyWindowInsets(insets);
    }

שיטות אלו מתארות את אופן הטיפול בחיתוכים בשורת המצב בכל המקרים (כלומר במרכז העליון, העליון לא ממורכז, התחתון וחתכים כפולים בכל הסיבובים).

דרישות

כדי להבטיח שאפליקציות לא יושפעו לרעה מגזרות, עליך לוודא כי:

  • שורת המצב נמשכת לפחות לגובה הגזרה במצב דיוקן
  • אזור החיתוך חייב להיות ב-letterbox במצבי מסך מלא ונוף

המכשיר שלך יכול לכלול עד גזירה אחת בכל קצה קצר (עליון ותחתון).

למידע נוסף, עיין ב- CDD .

יישום

כדי ליישם גזרות תצוגה במכשיר שלך, עליך להגדיר את הערכים הבאים עבור ממשק המשתמש של המערכת.

ערך תיאור
quick_qs_offset_height

מגדיר את השוליים העליונים עבור חלונית ההגדרות המהירות. השעון והסוללה מוצגים בחלל שמעל ללוח.

ב-values-land, הגדר ל- status_bar_height_landscape , ובפורטרט מוגדר לברירת המחדל של 48dp, או לגובה החתך, הגדול מביניהם. אם תרצה, יכול להיות גבוה יותר מהגזרה.

quick_qs_total_height

הגובה הכולל של חלונית ההגדרות המהירה-מהירה (חלונית הגדרות מהירות ממוטטת) כאשר גוון ההתראות מורחב, כולל החלל שמעל הלוח המכיל את השעון.

בגלל האופן שבו הגדרות מהירות פרושות, הגובה הכולל של חלונית ההגדרות המהירה-מהירה (כולל ההיסט) חייב להיות ידוע באופן סטטי, ולכן יש לכוונן ערך זה על-ידי אותו דלתא quick_qs_offset_height . ברירת המחדל של Values-land היא 152dp, בעוד שברירת המחדל לאורך היא 176dp.

status_bar_height_portrait

גובה ברירת המחדל של שורת המצב מנקודת המבט של המסגרת.

ברוב המכשירים, ברירת המחדל היא 24dp. כאשר יש גזירה, הגדר את הערך הזה לגובה הגזרה. אם תרצה, יכול להיות גבוה יותר מהגזרה.

status_bar_height_landscape

גובה שורת המצב לרוחב. חיתוכים נתמכים רק בקצוות הקצרים של המכשיר, כך שזה תמיד יהיה גובה שורת המצב ללא שינוי.

במכשיר ללא חיתוך, זה שווה ערך ל- status_bar_height_portrait . כאשר קיים חיתוך, שמור ערך זה בגובה שורת המצב המוגדרת כברירת מחדל.

config_mainBuiltInDisplayCutout

השביל המגדיר את צורת הגזרה. זוהי מחרוזת הניתנת לניתוח על ידי android.util.PathParser , וכך מוגדרים למערכת הגודל והצורה של החתך.

ניתן לציין @dp בנתיב כדי לחקות צורה המכוונת למכשירים שונים. מכיוון שלחתכים פיזיים יש גודל פיקסל מדויק, אל תשתמש במפרט @dp בעת הגדרת הנתיב עבור חריץ חומרה.

config_fillMainBuiltinDisplayCutout

ערך בוליאני שקובע אם לצייר את נתיב החיתוך (מוגדר למעלה) בתוכנה. ניתן להשתמש כדי לחקות גזרה, או למילוי גזרה פיזית כדי להשיג אנטי-aliasing.

אם נכון, config_mainBuiltInDisplayCutout ממולא בשחור.

ראה את קובצי dimens האלה עבור הגדרות ברירת המחדל:

שכבת-על לדוגמה לגזרת חיקוי:

<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">

    <!-- The bounding path of the cutout region of the main built-in display.
         Must either be empty if there is no cutout region, or a string that is parsable by
         {@link android.util.PathParser}.

         The path is assumed to be specified in display coordinates with pixel units and in
         the display's native orientation, with the origin of the coordinate system at the
         center top of the display.

         To facilitate writing device-independent emulation overlays, the marker `@dp` can be
         appended after the path string to interpret coordinates in dp instead of px units.
         Note that a physical cutout should be configured in pixels for the best results.
         -->
    <string translatable="false" name="config_mainBuiltInDisplayCutout">
        M 0,0
        L -48, 0
        L -44.3940446283, 36.0595537175
        C -43.5582133885, 44.4178661152 -39.6, 48.0 -31.2, 48.0
        L 31.2, 48.0
        C 39.6, 48.0 43.5582133885, 44.4178661152 44.3940446283, 36.0595537175
        L 48, 0
        Z
        @dp
    </string>

    <!-- Whether the display cutout region of the main built-in display should be forced to
         black in software (to avoid aliasing or emulate a cutout that is not physically existent).
     -->
    <bool name="config_fillMainBuiltInDisplayCutout">true</bool>

    <!-- Height of the status bar -->
    <dimen name="status_bar_height_portrait">48dp</dimen>
    <dimen name="status_bar_height_landscape">28dp</dimen>
    <!-- Height of area above QQS where battery/time go (equal to status bar height if > 48dp) -->
    <dimen name="quick_qs_offset_height">48dp</dimen>
    <!-- Total height of QQS (quick_qs_offset_height + 128) -->
    <dimen name="quick_qs_total_height">176dp</dimen>

</resources>

מַתַן תוֹקֵף

כדי לאמת את היישום שלך של גזרות תצוגה, הפעל את מבחני ה-CTS ב- tests/framework/base/windowmanager/src/android/server/wm .